UUT Report


Begin Sequence: MainSequence
(C:\Program Files\USB-IF Test Suite\USB Command Verifier\Libs\Chapter 9 Tests.seq)

Startup
Status: Done
Module Time: 10.1192135
GetNumberOfConfigurations
Status: Passed
Module Time: 0.0013602
GetNumberOfOtherSpeedConfigurations
Status: Passed
Module Time: 0.0012848
StartAtConfigIndex0
Status: Done
DeviceDescriptorTest_DeviceConfigured
Status: Failed
Module Time: 0.0103133
INFO Now Starting Test:Device Descriptor Test (Configuration Index 0)
INFO Device descriptor length : 12
INFO Device descriptor type : 1
INFO Major version : 1
INFO Minor version : 10
INFO Device class is vendor specific
INFO Device sub class : ff
INFO Device protocol : ff
INFO Device MaxPacketSize0 : 40
ABORT Create file on 'usb.if' failed
WARNING Failed to get vendor information for VendorID : 451
INFO Device ProductID : 9001
INFO Device BCD : 0
ERROR Invalid string descriptor type : 0ERROR Failed to get manufacturer string for iManufacturer : 1
FAIL (1.1.4) Device must support a GetDescriptor(String) request.
ERROR Invalid string descriptor type : 0ERROR Failed to get product string for iProduct : 2
FAIL (1.1.4) Device must support a GetDescriptor(String) request.
INFO Device Serial Number String : 0
INFO Number of configurations device supports : 1
INFO Stopping Test [ Device Descriptor Test (Configuration Index 0):
Number of: Fails (2); Aborts (1); Warnings (1) ]
DeviceDescriptorTest_DeviceAddressed
Status: Failed
Module Time: 0.0098283
INFO Now Starting Test:Device Descriptor Test (Configuration Index 0)
INFO Device descriptor length : 12
INFO Device descriptor type : 1
INFO Major version : 1
INFO Minor version : 10
INFO Device class is vendor specific
INFO Device sub class : ff
INFO Device protocol : ff
INFO Device MaxPacketSize0 : 40
ABORT Create file on 'usb.if' failed
WARNING Failed to get vendor information for VendorID : 451
INFO Device ProductID : 9001
INFO Device BCD : 0
ERROR Invalid string descriptor type : 0ERROR Failed to get manufacturer string for iManufacturer : 1
FAIL (1.1.4) Device must support a GetDescriptor(String) request.
ERROR Invalid string descriptor type : 0ERROR Failed to get product string for iProduct : 2
FAIL (1.1.4) Device must support a GetDescriptor(String) request.
INFO Device Serial Number String : 0
INFO Number of configurations device supports : 1
INFO Stopping Test [ Device Descriptor Test (Configuration Index 0):
Number of: Fails (2); Aborts (1); Warnings (1) ]
ConfigDescriptorTest_DeviceConfigured
Status: Failed
Module Time: 0.008888
INFO Now Starting Test:Configuration Descriptor Test (Configuration Index 0)
INFO Number of interface descriptors found 1
INFO Number of alternate interface descriptors found : 0
INFO Number of endpoint descriptors found : 1
INFO Configuration descriptor length : 9
INFO Configuration descriptor type : 2
INFO Configuration descriptor TotalLength : 19
INFO Configuration descriptor NumInterfaces : 1
INFO Configuration descriptor ConfigurationValue: 1
ERROR Invalid string descriptor type : 0ERROR Failed to get configuration string for iConfiguration : 4
FAIL (1.1.4) Device must support a GetDescriptor(String) request.
INFO Configuration descriptor bmAttributes : c0
INFO Device does not support remote wake up
INFO Maximum power device requires : 100mA
INFO Device is BUS/SELF-POWERED
INFO Device is currently SELF POWERED
INFO Currently remote wakeup is DISABLED
INFO Stopping Test [ Configuration Descriptor Test (Configuration Index 0):
Number of: Fails (1); Aborts (0); Warnings (0) ]
ConfigDescriptorTest_DeviceAddressed
Status: Failed
Module Time: 0.0088726
INFO Now Starting Test:Configuration Descriptor Test (Configuration Index 0)
INFO Number of interface descriptors found 1
INFO Number of alternate interface descriptors found : 0
INFO Number of endpoint descriptors found : 1
INFO Configuration descriptor length : 9
INFO Configuration descriptor type : 2
INFO Configuration descriptor TotalLength : 19
INFO Configuration descriptor NumInterfaces : 1
INFO Configuration descriptor ConfigurationValue: 1
ERROR Invalid string descriptor type : 0ERROR Failed to get configuration string for iConfiguration : 4
FAIL (1.1.4) Device must support a GetDescriptor(String) request.
INFO Configuration descriptor bmAttributes : c0
INFO Device does not support remote wake up
INFO Maximum power device requires : 100mA
INFO Device is BUS/SELF-POWERED
INFO Device is currently SELF POWERED
INFO Currently remote wakeup is DISABLED
INFO Stopping Test [ Configuration Descriptor Test (Configuration Index 0):
Number of: Fails (1); Aborts (0); Warnings (0) ]
InterfaceDescriptorTest
Status: Failed
Module Time: 0.0093878
INFO Now Starting Test:Interface Descriptor Test (Configuration Index 0)
INFO Bandwidth check passed
INFO Testing Interface number : 0 Alternate setting : 0
INFO Interface descriptor length : 9
INFO Interface descriptor bDescriptorType : 4
INFO Interface descriptor bAlternateSetting : 0
INFO Interface descriptor bNumEndPoints: 1
INFO Interface descriptor bInterfaceClass is vendor-specific
INFO Interface descriptor bInterfaceSubClass : ff
INFO Device uses a vendor-specific protocol for this interface
ERROR Invalid string descriptor type : 0ERROR Failed to get interface string for iInterface : 5
FAIL (1.1.4) Device must support a GetDescriptor(String) request.
WARNING SetInterface with interface number : 0 failed.
INFO Stopping Test [ Interface Descriptor Test (Configuration Index 0):
Number of: Fails (1); Aborts (0); Warnings (1) ]
EndpointDescriptorTest_DeviceConfigured
Status: Passed
Module Time: 0.0062634
INFO Now Starting Test:Endpoint Descriptor Test (Configuration Index 0)
INFO Testing Interface number : 0 Alternate setting : 0
INFO Endpoint descriptor length : 7
INFO Endpoint descriptor type : 5
INFO Endpoint Type : Bulk, Number : 6, Direction : OUT
INFO Endpoint descriptor bmAttributes : 2
INFO Endpoint descriptor raw MaxPacketSize : 40
INFO Endpoint descriptor interval : 0
INFO Stopping Test [ Endpoint Descriptor Test (Configuration Index 0):
Number of: Fails (0); Aborts (0); Warnings (0) ]
EndpointDescriptorTest_DeviceAddressed
Status: Passed
Module Time: 0.0064025
INFO Now Starting Test:Endpoint Descriptor Test (Configuration Index 0)
INFO Testing Interface number : 0 Alternate setting : 0
INFO Endpoint descriptor length : 7
INFO Endpoint descriptor type : 5
INFO Endpoint Type : Bulk, Number : 6, Direction : OUT
INFO Endpoint descriptor bmAttributes : 2
INFO Endpoint descriptor raw MaxPacketSize : 40
INFO Endpoint descriptor interval : 0
INFO Stopping Test [ Endpoint Descriptor Test (Configuration Index 0):
Number of: Fails (0); Aborts (0); Warnings (0) ]
HaltEndpointTest
Status: Passed
Module Time: 0.0095942
INFO Now Starting Test:Halt Endpoint Test (Configuration Index 0)
INFO Testing Interface number : 0 Alternate setting : 0
WARNING SetInterface with interface number : 0 failed.
INFO Testing EndPoint type : Bulk, Address : 6
INFO Endpoint is currently not halted
INFO Endpoint is halted
INFO Cleared endpoint halt
INFO Stopping Test [ Halt Endpoint Test (Configuration Index 0):
Number of: Fails (0); Aborts (0); Warnings (1) ]
SetConfigurationTest
Status: Passed
Module Time: 0.0081642
INFO Now Starting Test:SetConfiguration Test (Configuration Index 0)
INFO SetConfiguration with configuration value : 1
INFO Unconfigured the device
INFO SetConfiguration with configuration value : 1
INFO Stopping Test [ SetConfiguration Test (Configuration Index 0):
Number of: Fails (0); Aborts (0); Warnings (0) ]
SuspendResumeTest
Status: Passed
Module Time: 0.6855698
INFO Now Starting Test:Remote Wakeup Test (Configuration Index 0)
INFO Suspended the parent port of the device
INFO Stopping Test [ Remote Wakeup Test (Configuration Index 0):
Number of: Fails (0); Aborts (0); Warnings (0) ]
RemoteWakeupTestEnabled
Status: Passed
Module Time: 0.000421
INFO Now Starting Test:Remote Wakeup Test (Configuration Index 0)
INFO The device does not support remote wakeup
INFO Stopping Test [ Remote Wakeup Test (Configuration Index 0):
Number of: Fails (0); Aborts (0); Warnings (0) ]
RemoteWakeupTestDisabled
Status: Passed
Module Time: 0.0004341
INFO Now Starting Test:Remote Wakeup Test (Configuration Index 0)
INFO The device does not support remote wakeup
INFO Stopping Test [ Remote Wakeup Test (Configuration Index 0):
Number of: Fails (0); Aborts (0); Warnings (0) ]
Increment
Status: Done
Chap9_Loop_Check
Status: Skipped
DoOtherSpeedTest
Status: Done
BadDescriptorTest
Status: Passed
Module Time: 0.0036686
INFO Now Starting Test:Bad Descriptor Test (Descriptor Type 35)
INFO Stopping Test [ Bad Descriptor Test (Descriptor Type 35):
Number of: Fails (0); Aborts (0); Warnings (0) ]
BadFeatureTest
Status: Passed
Module Time: 0.0050643
INFO Now Starting Test:Bad Feature Test (Feature Selector 35)
INFO Stopping Test [ Bad Feature Test (Feature Selector 35):
Number of: Fails (0); Aborts (0); Warnings (0) ]
EnumerateTest
Status: Passed
Module Time: 36.5264323
INFO Now Starting Test:Enumeration Test (repeat 150 times)
INFO Device speed is Full
INFO Stopping Test [ Enumeration Test (repeat 150 times):
Number of: Fails (0); Aborts (0); Warnings (0) ]
DisplayOtherTestsToRun
Status: Done
Module Time: 0.0001363
CleanUp
Status: Done
Module Time: 0.000454
INFO Summary Log Counts [ Fails (7); Aborts (2); Warnings (4) ]

End Sequence: MainSequence


End UUT Report