Texas Instruments Windows CE SD X-Loader for EVM 3730 Built Mar 17 2012 at 11:09:26 Version BSP_WINCE_ARM_A8 1.02.00.02 open ebootsd.nb0 file Init HW: controller RST SDCARD: reqested speed 1000000, actual speed 1000000 SDCARD: reqested speed 25000000, actual speed 19200000 jumping to ebootsd image Microsoft Windows CE Bootloader Common Library Version 1.4 Built Apr 6 2012 17:44:19 Texas Instruments Windows CE EBOOT for OMAP35xx/37xx, Built Apr 6 2012 at 17:47:39 EBOOT Version 0.0, BSP BSP_WINCE_ARM_A8 1.02.00.02 TI OMAP3730 Version 0x00000012 (ES1.2) TPS659XX Version 0x30 (ES1.3) System ready! Preparing for download... INFO: Predownload.... Checking bootloader blocks are marked as reserved (Num = 14) WARN: Boot config wasn't found, using defaults INFO: SW4 boot setting: 0x0e >>> Forcing cold boot (non-persistent registry and other data will be wiped) <<< Hit space to enter configuration menu 5... Hit space to enter configuration menu 4... -------------------------------------------------------------------------------- Main Menu -------------------------------------------------------------------------------- [1] Show Current Settings [2] Select Boot Device [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [b] Select OPP Mode [0] Exit and Continue Selection: 2 -------------------------------------------------------------------------------- Select Boot Device -------------------------------------------------------------------------------- [1] LAN9115 MAC [2] USBFn RNDIS [3] NK from SDCard FILE [4] NK from NAND [0] Exit and Continue Selection (actual LAN9115 MAC): 3 Boot device set to NK from SDCard FILE -------------------------------------------------------------------------------- Main Menu -------------------------------------------------------------------------------- [1] Show Current Settings [2] Select Boot Device [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [b] Select OPP Mode [0] Exit and Continue Selection: 4 -------------------------------------------------------------------------------- Network Settings -------------------------------------------------------------------------------- [1] Show Current Settings [2] Enable/disable KITL [3] KITL interrupt/poll mode [4] KITL Active/Passive mode [5] Enable/disable DHCP [6] Set IP address [7] Set IP mask [8] Set default router [9] Enable/disable VMINI [a] Set MAC address [0] Exit and Continue Selection: 2 Disable KITL (actually enabled) [y/-]: y KITL disabled -------------------------------------------------------------------------------- Network Settings -------------------------------------------------------------------------------- [1] Show Current Settings [2] Enable/disable KITL [3] KITL interrupt/poll mode [4] KITL Active/Passive mode [5] Enable/disable DHCP [6] Set IP address [7] Set IP mask [8] Set default router [9] Enable/disable VMINI [a] Set MAC address [0] Exit and Continue Selection: 5 Disable DHCP (actually enabled) [y/-]: y DHCP disabled -------------------------------------------------------------------------------- Network Settings -------------------------------------------------------------------------------- [1] Show Current Settings [2] Enable/disable KITL [3] KITL interrupt/poll mode [4] KITL Active/Passive mode [5] Enable/disable DHCP [6] Set IP address [7] Set IP mask [8] Set default router [9] Enable/disable VMINI [a] Set MAC address [0] Exit and Continue Selection: 9 Disable VMINI (actually enabled) [y/-]: y VMINI disabled -------------------------------------------------------------------------------- Network Settings -------------------------------------------------------------------------------- [1] Show Current Settings [2] Enable/disable KITL [3] KITL interrupt/poll mode [4] KITL Active/Passive mode [5] Enable/disable DHCP [6] Set IP address [7] Set IP mask [8] Set default router [9] Enable/disable VMINI [a] Set MAC address [0] Exit and Continue Selection: 0 -------------------------------------------------------------------------------- Main Menu -------------------------------------------------------------------------------- [1] Show Current Settings [2] Select Boot Device [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [b] Select OPP Mode [0] Exit and Continue Selection: 7 Do you want save current settings [-/y]? y Current settings has been saved -------------------------------------------------------------------------------- Main Menu -------------------------------------------------------------------------------- [1] Show Current Settings [2] Select Boot Device [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [b] Select OPP Mode [0] Exit and Continue Selection: 5 -------------------------------------------------------------------------------- SDCard Settings -------------------------------------------------------------------------------- [1] Show Current Settings [2] Enter Filename [0] Exit and Continue Selection: 2 Type new filename (8.3 format) :EBOOTND.bin -------------------------------------------------------------------------------- SDCard Settings -------------------------------------------------------------------------------- [1] Show Current Settings [2] Enter Filename [0] Exit and Continue Selection: 0 -------------------------------------------------------------------------------- Main Menu -------------------------------------------------------------------------------- [1] Show Current Settings [2] Select Boot Device [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [b] Select OPP Mode [0] Exit and Continue Selection: 8 -------------------------------------------------------------------------------- Flash Management -------------------------------------------------------------------------------- [1] Show flash geometry [2] Dump flash sector [3] Erase flash [4] Erase block range [5] Reserve block range [6] Set bad block [7] Format flash [8] Enable flashing NK.bin [9] Set ECC mode [0] Exit and Continue Selection: 8 Enable Flashing NK.bin [y/-]: y Flashing NK.bin is enabled -------------------------------------------------------------------------------- Flash Management -------------------------------------------------------------------------------- [1] Show flash geometry [2] Dump flash sector [3] Erase flash [4] Erase block range [5] Reserve block range [6] Set bad block [7] Format flash [8] Enable flashing NK.bin [9] Set ECC mode [0] Exit and Continue Selection: 9 This command is used to temporarily changing ECC mode in NK.bin, it is for test purpose only! Select ECC mode [0(Hamming 1bit)/1(BCH 4bit)/2(BCH 8bit)]: 0 -------------------------------------------------------------------------------- Flash Management -------------------------------------------------------------------------------- [1] Show flash geometry [2] Dump flash sector [3] Erase flash [4] Erase block range [5] Reserve block range [6] Set bad block [7] Format flash [8] Enable flashing NK.bin [9] Set ECC mode [0] Exit and Continue Selection: 0 -------------------------------------------------------------------------------- Main Menu -------------------------------------------------------------------------------- [1] Show Current Settings [2] Select Boot Device [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [b] Select OPP Mode [0] Exit and Continue Selection: 0 SDHC init Init HW: controller RST SDHC: 1 bit mode MMC Reset HandleInsertion MMC Reset SDCARD: reqested speed 1000000, actual speed 1000000 SDHC: 4 bit mode SDCARD: reqested speed 25000000, actual speed 19200000 BLSDCardReadLogo: cannot open Logo.bmp LCD Resolution - Default BL_IMAGE_TYPE_BIN Download file information: ----------------------------------------------------------- [0]: Address=0x87e00000 Length=0x0003006c Save=0x80002000 ----------------------------------------------------------- Download file type: 4 .....rom_offset=0x0. ...ImageStart = 0x87E00000, ImageLength = 0x3006C, LaunchAddr = 0x87E01000 Completed file(s): ------------------------------------------------------------------------------- [0]: Address=0x87E00000 Length=0x3006C Name="" Target=FLASH Writing EBOOT image to flash memory OALFlashStoreOpen: 4096 blocks, 64 sectors/block OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks ROMHDR (pTOC = 0x80030f58) --------------------- DLL First : 0x4001c001 DLL Last : 0x4001c001 Physical First : 0x87e00000 Physical Last : 0x87e3006c Num Modules : 1 RAM Start : 0x87e80000 RAM Free : 0x87ec3000 RAM End : 0x87ed0000 Num Copy Entries : 1 Copy Entries Offset : 0x87e2efcc Prof Symbol Length : 0x00000000 Prof Symbol Offset : 0x00000000 Num Files : 0 Kernel Flags : 0x00000000 FileSys RAM Percent : 0x80808080 Driver Glob Start : 0x00000000 Driver Glob Length : 0x00000000 CPU : 0x01c2 MiscFlags : 0x0002 Extensions : 0x00000000 Tracking Mem Start : 0x00000000 Tracking Mem Length : 0x00000000 ------------------------------------------------ EBOOT image written ROMHDR at Address 87E00044h ERROR: OEMLaunch: Unknown download type, spin forever Texas Instruments Windows CE SD X-Loader for EVM 3730 Built Mar 17 2012 at 11:09:26 Version BSP_WINCE_ARM_A8 1.02.00.02 open ebootsd.nb0 file Init HW: controller RST SDCARD: reqested speed 1000000, actual speed 1000000 SDCARD: reqested speed 25000000, actual speed 19200000 jumping to ebootsd image Microsoft Windows CE Bootloader Common Library Version 1.4 Built Apr 6 2012 17:44:19 Texas Instruments Windows CE EBOOT for OMAP35xx/37xx, Built Apr 6 2012 at 17:47:39 EBOOT Version 0.0, BSP BSP_WINCE_ARM_A8 1.02.00.02 TI OMAP3730 Version 0x00000012 (ES1.2) TPS659XX Version 0x30 (ES1.3) System ready! Preparing for download... INFO: Predownload.... Checking bootloader blocks are marked as reserved (Num = 14) WARN: Boot config wasn't found, using defaults INFO: SW4 boot setting: 0x0e >>> Forcing cold boot (non-persistent registry and other data will be wiped) <<< Hit space to enter configuration menu 5... -------------------------------------------------------------------------------- Main Menu -------------------------------------------------------------------------------- [1] Show Current Settings [2] Select Boot Device [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [b] Select OPP Mode [0] Exit and Continue Selection: 2 -------------------------------------------------------------------------------- Select Boot Device -------------------------------------------------------------------------------- [1] LAN9115 MAC [2] USBFn RNDIS [3] NK from SDCard FILE [4] NK from NAND [0] Exit and Continue Selection (actual LAN9115 MAC): 3 Boot device set to NK from SDCard FILE -------------------------------------------------------------------------------- Main Menu -------------------------------------------------------------------------------- [1] Show Current Settings [2] Select Boot Device [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [b] Select OPP Mode [0] Exit and Continue Selection: 4 -------------------------------------------------------------------------------- Network Settings -------------------------------------------------------------------------------- [1] Show Current Settings [2] Enable/disable KITL [3] KITL interrupt/poll mode [4] KITL Active/Passive mode [5] Enable/disable DHCP [6] Set IP address [7] Set IP mask [8] Set default router [9] Enable/disable VMINI [a] Set MAC address [0] Exit and Continue Selection: 2 Disable KITL (actually enabled) [y/-]: y KITL disabled -------------------------------------------------------------------------------- Network Settings -------------------------------------------------------------------------------- [1] Show Current Settings [2] Enable/disable KITL [3] KITL interrupt/poll mode [4] KITL Active/Passive mode [5] Enable/disable DHCP [6] Set IP address [7] Set IP mask [8] Set default router [9] Enable/disable VMINI [a] Set MAC address [0] Exit and Continue Selection: 5 Disable DHCP (actually enabled) [y/-]: y DHCP disabled -------------------------------------------------------------------------------- Network Settings -------------------------------------------------------------------------------- [1] Show Current Settings [2] Enable/disable KITL [3] KITL interrupt/poll mode [4] KITL Active/Passive mode [5] Enable/disable DHCP [6] Set IP address [7] Set IP mask [8] Set default router [9] Enable/disable VMINI [a] Set MAC address [0] Exit and Continue Selection: 9 Disable VMINI (actually enabled) [y/-]: y VMINI disabled -------------------------------------------------------------------------------- Network Settings -------------------------------------------------------------------------------- [1] Show Current Settings [2] Enable/disable KITL [3] KITL interrupt/poll mode [4] KITL Active/Passive mode [5] Enable/disable DHCP [6] Set IP address [7] Set IP mask [8] Set default router [9] Enable/disable VMINI [a] Set MAC address [0] Exit and Continue Selection: 0 -------------------------------------------------------------------------------- Main Menu -------------------------------------------------------------------------------- [1] Show Current Settings [2] Select Boot Device [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [b] Select OPP Mode [0] Exit and Continue Selection: 9 Enable OAL Retail Messages [y/-]: y OAL Retail Messages enabled -------------------------------------------------------------------------------- Main Menu -------------------------------------------------------------------------------- [1] Show Current Settings [2] Select Boot Device [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [b] Select OPP Mode [0] Exit and Continue Selection: 7 Do you want save current settings [-/y]? y Current settings has been saved -------------------------------------------------------------------------------- Main Menu -------------------------------------------------------------------------------- [1] Show Current Settings [2] Select Boot Device [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [b] Select OPP Mode [0] Exit and Continue Selection: 5 -------------------------------------------------------------------------------- SDCard Settings -------------------------------------------------------------------------------- [1] Show Current Settings [2] Enter Filename [0] Exit and Continue Selection: 2 Type new filename (8.3 format) :xldrnand.bin -------------------------------------------------------------------------------- SDCard Settings -------------------------------------------------------------------------------- [1] Show Current Settings [2] Enter Filename [0] Exit and Continue Selection: 0 -------------------------------------------------------------------------------- Main Menu -------------------------------------------------------------------------------- [1] Show Current Settings [2] Select Boot Device [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [b] Select OPP Mode [0] Exit and Continue Selection: 8 -------------------------------------------------------------------------------- Flash Management -------------------------------------------------------------------------------- [1] Show flash geometry [2] Dump flash sector [3] Erase flash [4] Erase block range [5] Reserve block range [6] Set bad block [7] Format flash [8] Enable flashing NK.bin [9] Set ECC mode [0] Exit and Continue Selection: 8 Enable Flashing NK.bin [y/-]: y Flashing NK.bin is enabled -------------------------------------------------------------------------------- Flash Management -------------------------------------------------------------------------------- [1] Show flash geometry [2] Dump flash sector [3] Erase flash [4] Erase block range [5] Reserve block range [6] Set bad block [7] Format flash [8] Enable flashing NK.bin [9] Set ECC mode [0] Exit and Continue Selection: 9 This command is used to temporarily changing ECC mode in NK.bin, it is for test purpose only! Select ECC mode [0(Hamming 1bit)/1(BCH 4bit)/2(BCH 8bit)]: 0 -------------------------------------------------------------------------------- Flash Management -------------------------------------------------------------------------------- [1] Show flash geometry [2] Dump flash sector [3] Erase flash [4] Erase block range [5] Reserve block range [6] Set bad block [7] Format flash [8] Enable flashing NK.bin [9] Set ECC mode [0] Exit and Continue Selection: 0 -------------------------------------------------------------------------------- Main Menu -------------------------------------------------------------------------------- [1] Show Current Settings [2] Select Boot Device [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [b] Select OPP Mode [0] Exit and Continue Selection: 0 SDHC init Init HW: controller RST SDHC: 1 bit mode MMC Reset HandleInsertion MMC Reset SDCARD: reqested speed 1000000, actual speed 1000000 SDHC: 4 bit mode SDCARD: reqested speed 25000000, actual speed 19200000 BLSDCardReadLogo: cannot open Logo.bmp LCD Resolution - Default BL_IMAGE_TYPE_BIN Download file information: ----------------------------------------------------------- [0]: Address=0x40200000 Length=0x00009398 Save=0x80002000 ----------------------------------------------------------- Download file type: 3 ....rom_offset=0x0. ...ImageStart = 0x40200000, ImageLength = 0x9398, LaunchAddr = 0x40201000 Completed file(s): ------------------------------------------------------------------------------- [0]: Address=0x40200000 Length=0x9398 Name="" Target=FLASH Writing XLDR image to flash memory OALFlashStoreOpen: 4096 blocks, 64 sectors/block OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks ROMHDR (pTOC = 0x8000ad18) --------------------- DLL First : 0x4001c001 DLL Last : 0x4001c001 Physical First : 0x40200000 Physical Last : 0x40209398 Num Modules : 1 RAM Start : 0x4020c000 RAM Free : 0x4020e000 RAM End : 0x4020f000 Num Copy Entries : 1 Copy Entries Offset : 0x40208d8c Prof Symbol Length : 0x00000000 Prof Symbol Offset : 0x00000000 Num Files : 0 Kernel Flags : 0x00000000 FileSys RAM Percent : 0x80808080 Driver Glob Start : 0x00000000 Driver Glob Length : 0x00000000 CPU : 0x01c2 MiscFlags : 0x0002 Extensions : 0x00000000 Tracking Mem Start : 0x00000000 Tracking Mem Length : 0x00000000 ------------------------------------------------ XLDR image written ERROR: OEMLaunch: Unknown download type, spin forever Texas Instruments Windows CE SD X-Loader for EVM 3730 Built Mar 17 2012 at 11:09:26 Version BSP_WINCE_ARM_A8 1.02.00.02 open ebootsd.nb0 file Init HW: controller RST SDCARD: reqested speed 1000000, actual speed 1000000 SDCARD: reqested speed 25000000, actual speed 19200000 jumping to ebootsd image Microsoft Windows CE Bootloader Common Library Version 1.4 Built Apr 6 2012 17:44:19 Texas Instruments Windows CE EBOOT for OMAP35xx/37xx, Built Apr 6 2012 at 17:47:39 EBOOT Version 0.0, BSP BSP_WINCE_ARM_A8 1.02.00.02 TI OMAP3730 Version 0x00000012 (ES1.2) TPS659XX Version 0x30 (ES1.3) System ready! Preparing for download... INFO: Predownload.... Checking bootloader blocks are marked as reserved (Num = 14) INFO: Boot configuration found >>> Forcing cold boot (non-persistent registry and other data will be wiped) <<< Hit space to enter configuration menu 5... Hit space to enter configuration menu 4... -------------------------------------------------------------------------------- Main Menu -------------------------------------------------------------------------------- [1] Show Current Settings [2] Select Boot Device [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [b] Select OPP Mode [0] Exit and Continue Selection: 2 -------------------------------------------------------------------------------- Select Boot Device -------------------------------------------------------------------------------- [1] LAN9115 MAC [2] USBFn RNDIS [3] NK from SDCard FILE [4] NK from NAND [0] Exit and Continue Selection (actual NK from SDCard FILE ): 3 Boot device set to NK from SDCard FILE -------------------------------------------------------------------------------- Main Menu -------------------------------------------------------------------------------- [1] Show Current Settings [2] Select Boot Device [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [b] Select OPP Mode [0] Exit and Continue Selection: 4 -------------------------------------------------------------------------------- Network Settings -------------------------------------------------------------------------------- [1] Show Current Settings [2] Enable/disable KITL [3] KITL interrupt/poll mode [4] KITL Active/Passive mode [5] Enable/disable DHCP [6] Set IP address [7] Set IP mask [8] Set default router [9] Enable/disable VMINI [a] Set MAC address [0] Exit and Continue Selection: 2 Enable KITL (actually disabled) [y/-]: 0 KITL stays disabled -------------------------------------------------------------------------------- Network Settings -------------------------------------------------------------------------------- [1] Show Current Settings [2] Enable/disable KITL [3] KITL interrupt/poll mode [4] KITL Active/Passive mode [5] Enable/disable DHCP [6] Set IP address [7] Set IP mask [8] Set default router [9] Enable/disable VMINI [a] Set MAC address [0] Exit and Continue Selection: 0 -------------------------------------------------------------------------------- Main Menu -------------------------------------------------------------------------------- [1] Show Current Settings [2] Select Boot Device [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [b] Select OPP Mode [0] Exit and Continue Selection: 5 -------------------------------------------------------------------------------- SDCard Settings -------------------------------------------------------------------------------- [1] Show Current Settings [2] Enter Filename [0] Exit and Continue Selection: 2 Type new filename (8.3 format) :nk.bin -------------------------------------------------------------------------------- SDCard Settings -------------------------------------------------------------------------------- [1] Show Current Settings [2] Enter Filename [0] Exit and Continue Selection: 0 -------------------------------------------------------------------------------- Main Menu -------------------------------------------------------------------------------- [1] Show Current Settings [2] Select Boot Device [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [b] Select OPP Mode [0] Exit and Continue Selection: 8 -------------------------------------------------------------------------------- Flash Management -------------------------------------------------------------------------------- [1] Show flash geometry [2] Dump flash sector [3] Erase flash [4] Erase block range [5] Reserve block range [6] Set bad block [7] Format flash [8] Enable flashing NK.bin [9] Set ECC mode [0] Exit and Continue Selection: 8 Enable Flashing NK.bin [y/-]: y Flashing NK.bin is enabled -------------------------------------------------------------------------------- Flash Management -------------------------------------------------------------------------------- [1] Show flash geometry [2] Dump flash sector [3] Erase flash [4] Erase block range [5] Reserve block range [6] Set bad block [7] Format flash [8] Enable flashing NK.bin [9] Set ECC mode [0] Exit and Continue Selection: 9 This command is used to temporarily changing ECC mode in NK.bin, it is for test purpose only! Select ECC mode [0(Hamming 1bit)/1(BCH 4bit)/2(BCH 8bit)]: 0 -------------------------------------------------------------------------------- Flash Management -------------------------------------------------------------------------------- [1] Show flash geometry [2] Dump flash sector [3] Erase flash [4] Erase block range [5] Reserve block range [6] Set bad block [7] Format flash [8] Enable flashing NK.bin [9] Set ECC mode [0] Exit and Continue Selection: 0 -------------------------------------------------------------------------------- Main Menu -------------------------------------------------------------------------------- [1] Show Current Settings [2] Select Boot Device [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [b] Select OPP Mode [0] Exit and Continue Selection: 0 SDHC init Init HW: controller RST SDHC: 1 bit mode MMC Reset HandleInsertion MMC Reset SDCARD: reqested speed 1000000, actual speed 1000000 SDHC: 4 bit mode SDCARD: reqested speed 25000000, actual speed 19200000 BLSDCardReadLogo: cannot open Logo.bmp LCD Resolution - Default BL_IMAGE_TYPE_BIN Download file information: ----------------------------------------------------------- [0]: Address=0xc0002000 Length=0x023cd704 Save=0x80002000 ----------------------------------------------------------- Download file type: 6 .............................................................................................................................................................................................................................................................................rom_offset=0x40000000. ..ImageStart = 0xC0002000, ImageLength = 0x23CD704, LaunchAddr = 0xC0012300 Completed file(s): ------------------------------------------------------------------------------- [0]: Address=0xC0002000 Length=0x23CD704 Name="" Target=FLASH ROMHDR (pTOC = 0x823cc080) --------------------- DLL First : 0x4001c001 DLL Last : 0x41bcc10c Physical First : 0x80002000 Physical Last : 0x823cf704 Num Modules : 325 RAM Start : 0x823d0000 RAM Free : 0x82433000 RAM End : 0x84800000 Num Copy Entries : 3 Copy Entries Offset : 0x81b6efc0 Prof Symbol Length : 0x00000000 Prof Symbol Offset : 0x00000000 Num Files : 124 Kernel Flags : 0x00000000 FileSys RAM Percent : 0x80808080 Driver Glob Start : 0x00000000 Driver Glob Length : 0x00000000 CPU : 0x01c2 MiscFlags : 0x0002 Extensions : 0x8000740c Tracking Mem Start : 0x00000000 Tracking Mem Length : 0x00000000 ------------------------------------------------ ROMHDR at Address C0002044h Load NK image from flash memory ROMHDR (pTOC = 0x823cc080) --------------------- DLL First : 0x4001c001 DLL Last : 0x41bcc10c Physical First : 0x80002000 Physical Last : 0x823cf704 Num Modules : 325 RAM Start : 0x823d0000 RAM Free : 0x82433000 RAM End : 0x84800000 Num Copy Entries : 3 Copy Entries Offset : 0x81b6efc0 Prof Symbol Length : 0x00000000 Prof Symbol Offset : 0x00000000 Num Files : 124 Kernel Flags : 0x00000000 FileSys RAM Percent : 0x80808080 Driver Glob Start : 0x00000000 Driver Glob Length : 0x00000000 CPU : 0x01c2 MiscFlags : 0x0002 Extensions : 0x8000740c Tracking Mem Start : 0x00000000 Tracking Mem Length : 0x00000000 ------------------------------------------------ NK Image Loaded Launch Windows CE image by jumping to 0x80002000... Windows CE Kernel for ARM (Thumb Enabled) Built on Apr 5 2011 at 17:47:22 INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x900b OAL: CPU revision 0x12:DM3730 OAL: CPU L2 Aux register 0x400042 ****Profiler Build**** ---High Performance Frequency is 25999474 hz--- DeviceId................. EVM3730- pArgs->flags............. 0x20 pArgs->devLoc.IfcType.... 0 pArgs->devLoc.LogicalLoc. 0x15000000 pArgs->devLoc.PhysicalLoc 0x0 pArgs->devLoc.Pin........ 0 pArgs->ip4address........ 0 pArgs->mac............... 0x2020 0x3040 0x5060 pDevice->Name............ s pDevice->ifcType......... 0 pDevice->id.............. 0x15000000 pDevice->resource........ 0 pDevice->type............ 2 pDevice->pDriver......... 0x823E2000 WARN: OALKitlInit: KITL Disabled OEMIoControl: Unsupported Code 0x1010148 - device 0x0101 func 82 Compensating OPP1 for 63mV Orig nvalue:0x99fff8 New nvalue:0x99c1b6 Compensating OPP2 for 63mV Orig nvalue:0x998a80 New nvalue:0xaaebd8 Compensating OPP3 for 75mV Orig nvalue:0xaad6c4 New nvalue:0xaab8a7 Compensating OPP4 for 100mV Orig nvalue:0xaaa79e New nvalue:0xaa8f85 SetOpp to 3 opm0: chipOffOffset:10161,332 chipOSWROffset:799,26 chipCSWROffset:633,20 coreCSWROffset:379,12 coreInactiveOffset:379,12 mpuInactiveOffset:379,12 opm1: chipOffOffset:9916,324 chipOSWROffset:755,24 chipCSWROffset:633,20 coreCSWROffset:379,12 coreInactiveOffset:379,12 mpuInactiveOffset:379,12 opm2: chipOffOffset:8024,262 chipOSWROffset:725,23 chipCSWROffset:633,20 coreCSWROffset:379,12 coreInactiveOffset:379,12 mpuInactiveOffset:379,12 opm3: chipOffOffset:8024,262 chipOSWROffset:694,22 chipCSWROffset:633,20 coreCSWROffset:379,12 coreInactiveOffset:379,12 mpuInactiveOffset:379,12 opm4: chipOffOffset:8024,262 chipOSWROffset:694,22 chipCSWROffset:633,20 coreCSWROffset:379,12 coreInactiveOffset:379,12 mpuInactiveOffset:379,12 opm5: chipOffOffset:8024,262 chipOSWROffset:694,22 chipCSWROffset:633,20 coreCSWROffset:379,12 coreInactiveOffset:379,12 mpuInactiveOffset:379,12 opm6: chipOffOffset:8024,262 chipOSWROffset:694,22 chipCSWROffset:633,20 coreCSWROffset:379,12 coreInactiveOffset:379,12 mpuInactiveOffset:379,12 ECC TYPE is Hamming 1 bit *** Cold Boot - Format TFAT *** OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49 OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49 OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49 OEMIoControl: Unsupported Code 0x10100d0 - device 0x0101 func 52 DSPLINK Module (1.65.00.03) created on Date: Jan 17 2011 Time: 15:02:36 DRIVER_VERSION : 110, DATECODE : 041707 Rx PIO Tx PIO Lan9221 identified. ID_REV = 0x92210000 Use IntPhy This chip doesn't support Auto Mdix!!! VBridge:: VB_INITIALIZED returns [0] SDHC: CPU revision 0x12 SDHC host controller initialize: m_fastPathSDIO:1 m_fastPathSDMEM:0 OEMIoControl: Unsupported Code 0x10100fc - device 0x0101 func 63 In fingerinstall Finger_cab_Install = 1 Application Launched = 0 Explorer(V2.0) taskbar thread started. Texas Instruments Windows CE SD X-Loader for EVM 3730 Built Mar 17 2012 at 11:09:26 Version BSP_WINCE_ARM_A8 1.02.00.02 open ebootsd.nb0 file Init HW: controller RST SDCARD: reqested speed 1000000, actual speed 1000000 SDCARD: reqested speed 25000000, actual speed 19200000 jumping to ebootsd image Microsoft Windows CE Bootloader Common Library Version 1.4 Built Apr 6 2012 17:44:19 Texas Instruments Windows CE EBOOT for OMAP35xx/37xx, Built Apr 6 2012 at 17:47:39 EBOOT Version 0.0, BSP BSP_WINCE_ARM_A8 1.02.00.02 TI OMAP3730 Version 0x00000012 (ES1.2) TPS659XX Version 0x30 (ES1.3) System ready! Preparing for download... INFO: Predownload.... Checking bootloader blocks are marked as reserved (Num = 14) INFO: Boot configuration found >>> Forcing cold boot (non-persistent registry and other data will be wiped) <<< Hit space to enter configuration menu 5... Hit space to enter configuration menu 4... -------------------------------------------------------------------------------- Main Menu -------------------------------------------------------------------------------- [1] Show Current Settings [2] Select Boot Device [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [b] Select OPP Mode [0] Exit and Continue Selection: 2 -------------------------------------------------------------------------------- Select Boot Device -------------------------------------------------------------------------------- [1] LAN9115 MAC [2] USBFn RNDIS [3] NK from SDCard FILE [4] NK from NAND [0] Exit and Continue Selection (actual NK from SDCard FILE ): 4 Boot device set to NK from NAND -------------------------------------------------------------------------------- Main Menu -------------------------------------------------------------------------------- [1] Show Current Settings [2] Select Boot Device [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [b] Select OPP Mode [0] Exit and Continue Selection: 9 Disable OAL Retail Messages [y/-]: 0 -------------------------------------------------------------------------------- Main Menu -------------------------------------------------------------------------------- [1] Show Current Settings [2] Select Boot Device [3] Select KITL (Debug) Device [4] Network Settings [5] SDCard Settings [6] Set Device ID [7] Save Settings [8] Flash Management [9] Enable/Disable OAL Retail Messages [a] Select Display Resolution [b] Select OPP Mode [0] Exit and Continue Selection: 0 SDHC init Init HW: controller RST SDHC: 1 bit mode MMC Reset HandleInsertion MMC Reset SDCARD: reqested speed 1000000, actual speed 1000000 SDHC: 4 bit mode SDCARD: reqested speed 25000000, actual speed 19200000 BLSDCardReadLogo: cannot open Logo.bmp LCD Resolution - Default Load NK image from flash memory ROMHDR (pTOC = 0x823cc080) --------------------- DLL First : 0x4001c001 DLL Last : 0x41bcc10c Physical First : 0x80002000 Physical Last : 0x823cf704 Num Modules : 325 RAM Start : 0x823d0000 RAM Free : 0x82433000 RAM End : 0x84800000 Num Copy Entries : 3 Copy Entries Offset : 0x81b6efc0 Prof Symbol Length : 0x00000000 Prof Symbol Offset : 0x00000000 Num Files : 124 Kernel Flags : 0x00000000 FileSys RAM Percent : 0x80808080 Driver Glob Start : 0x00000000 Driver Glob Length : 0x00000000 CPU : 0x01c2 MiscFlags : 0x0002 Extensions : 0x8000740c Tracking Mem Start : 0x00000000 Tracking Mem Length : 0x00000000 ------------------------------------------------ NK Image Loaded Launch Windows CE image by jumping to 0x80002000... Windows CE Kernel for ARM (Thumb Enabled) Built on Apr 5 2011 at 17:47:22 INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x900b OAL: CPU revision 0x12:DM3730 OAL: CPU L2 Aux register 0x400042 ****Profiler Build**** ---High Performance Frequency is 25999297 hz--- DeviceId................. EVM3730- pArgs->flags............. 0x20 pArgs->devLoc.IfcType.... 0 pArgs->devLoc.LogicalLoc. 0x15000000 pArgs->devLoc.PhysicalLoc 0x0 pArgs->devLoc.Pin........ 0 pArgs->ip4address........ 0 pArgs->mac............... 0x2020 0x3040 0x5060 pDevice->Name............ s pDevice->ifcType......... 0 pDevice->id.............. 0x15000000 pDevice->resource........ 0 pDevice->type............ 2 pDevice->pDriver......... 0x823E2000 WARN: OALKitlInit: KITL Disabled OEMIoControl: Unsupported Code 0x1010148 - device 0x0101 func 82 Compensating OPP1 for 63mV Orig nvalue:0x99fff8 New nvalue:0x99c1b6 Compensating OPP2 for 63mV Orig nvalue:0x998a80 New nvalue:0xaaebd8 Compensating OPP3 for 75mV Orig nvalue:0xaad6c4 New nvalue:0xaab8a7 Compensating OPP4 for 100mV Orig nvalue:0xaaa79e New nvalue:0xaa8f85 SetOpp to 3 opm0: chipOffOffset:10161,332 chipOSWROffset:799,26 chipCSWROffset:633,20 coreCSWROffset:379,12 coreInactiveOffset:379,12 mpuInactiveOffset:379,12 opm1: chipOffOffset:9916,324 chipOSWROffset:755,24 chipCSWROffset:633,20 coreCSWROffset:379,12 coreInactiveOffset:379,12 mpuInactiveOffset:379,12 opm2: chipOffOffset:8024,262 chipOSWROffset:725,23 chipCSWROffset:633,20 coreCSWROffset:379,12 coreInactiveOffset:379,12 mpuInactiveOffset:379,12 opm3: chipOffOffset:8024,262 chipOSWROffset:694,22 chipCSWROffset:633,20 coreCSWROffset:379,12 coreInactiveOffset:379,12 mpuInactiveOffset:379,12 opm4: chipOffOffset:8024,262 chipOSWROffset:694,22 chipCSWROffset:633,20 coreCSWROffset:379,12 coreInactiveOffset:379,12 mpuInactiveOffset:379,12 opm5: chipOffOffset:8024,262 chipOSWROffset:694,22 chipCSWROffset:633,20 coreCSWROffset:379,12 coreInactiveOffset:379,12 mpuInactiveOffset:379,12 opm6: chipOffOffset:8024,262 chipOSWROffset:694,22 chipCSWROffset:633,20 coreCSWROffset:379,12 coreInactiveOffset:379,12 mpuInactiveOffset:379,12 ECC TYPE is Hamming 1 bit *** Cold Boot - Format TFAT *** OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49 OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49 OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49 OEMIoControl: Unsupported Code 0x10100d0 - device 0x0101 func 52 DSPLINK Module (1.65.00.03) created on Date: Jan 17 2011 Time: 15:02:36 DRIVER_VERSION : 110, DATECODE : 041707 Rx PIO Tx PIO Lan9221 identified. ID_REV = 0x92210000 Use IntPhy This chip doesn't support Auto Mdix!!! VBridge:: VB_INITIALIZED returns [0] SDHC: CPU revision 0x12 SDHC host controller initialize: m_fastPathSDIO:1 m_fastPathSDMEM:0 OEMIoControl: Unsupported Code 0x10100fc - device 0x0101 func 63 In fingerinstall Finger_cab_Install = 1 Application Launched = 0 Explorer(V2.0) taskbar thread started.