Texas Instruments Inc X-Loader 1.41.0-g28b5a696 (Sep 5 2012 - 15:29:09) OMAP4460: 1.5 GHz capable SOM Starting OS Bootloader from MMC/SD1 ... U-Boot 1.1.4-g83ec135f-dirty (Sep 5 2012 - 15:29:42) Load address: 0x80e80000 DRAM: 1024 MB Flash: 0 kB Using default environment In: serial Out: serial Err: serial Initializing SD(0) Slot. ptbl slot: SD:(0). efi partition table not found efi partition table: ptbl slot: EMMC:(1). 256 128K xloader 512 256K bootloader 1024 128K misc 2048 16M efs 34816 16K crypto 34848 8M recovery 51232 8M boot 67616 512M system 1116192 256M cache 1640480 29630M userdata Net: KS8851SNL Hit any key to stop autoboot: 0 OMAP44XX SDP # OMAP44XX SDP # OMAP44XX SDP # OMAP44XX SDP # setenv bootargs 'console=ttyO2,115200n8 mem=1G androidboot.console=ttyO2 console=ttyO2,115200n8 root=/dev/mmcblk1p2 init=/init vram=64' OMAP44XX SDP # setenv bootcmd 'mmcinit 0;fatload mmc 0 0x80000000 uImage; bootm 0x80000000' OMAP44XX SDP # boot 4667128 bytes read ## Booting image at 80000000 ... Image Name: Linux-3.0.31-01713-gbdaabe6 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4667064 Bytes = 4.5 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK OK I2C read: I/O error Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.31-01713-gbdaabe6 (nithya@nithya-Veriton-Series) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #1 SMP PREEMPT 2 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP4 blaze board [ 0.000000] android_display: setting default resolution 864*480, bpp=4 [ 0.000000] android_display: tiler1d 13271040 [ 0.000000] android_display: setting fb0.vram to 3440640 [ 0.000000] android_display: setting vram to 3440640 [ 0.000000] android_display: ion carveouts: 116916224 tiler2d, 3932160 nonsecure [ 0.000000] omap4_total_ram_size = 0x80000000 [ 0.000000] omap4_smc_size = 0x300000 [ 0.000000] omap4_ion_heap_secure_input_size = 0x5a00000 [ 0.000000] omap4_ion_heap_secure_output_wfdhdcp_size = 0x1000000 [ 0.000000] omap4_ducati_heap_size = 0x6900000 [ 0.000000] omap4_ion_heap_tiler_mem_size = 0x7040000 [ 0.000000] omap4_ion_heap_nonsec_tiler_mem_size = 0x3c0000 [ 0.000000] omap4_smc_addr = 0xffd00000 [ 0.000000] omap4_ion_heap_secure_input_addr = 0xfa300000 [ 0.000000] omap4_ion_heap_secure_output_wfdhdcp_addr = 0xf9300000 [ 0.000000] omap4_ducati_heap_addr = 0xf2a00000 [ 0.000000] omap4_ion_heap_tiler_mem_addr = 0xeb9c0000 [ 0.000000] omap4_ion_heap_nonsec_tiler_mem_addr = 0xeb600000 [ 0.000000] omap_ion_init: secure_input id=2 [fa300000-ffd00000] size=5a00000 [ 0.000000] omap_ion_init: secure_output_wfdhdcp id=5 [f9300000-fa300000] size=1000000 [ 0.000000] omap_ion_init: tiler id=1 [eb9c0000-f2a00000] size=7040000 [ 0.000000] omap_ion_init: nonsecure_tiler id=3 [eb600000-eb9c0000] size=3c0000 [ 0.000000] omap_ion_init: system id=0 [0-0] size=0 [ 0.000000] omap_ion_init: tiler_reservation id=4 [0-0] size=0 [ 0.000000] Reserving 67108864 bytes SDRAM for VRAM [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] OMAP4460 ES1.1 [ 0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xd000 [ 0.000000] On node 0 totalpages: 245248 [ 0.000000] free_area_init_node: node 0, pgdat c0910f20, node_mem_map c0a8a000 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32512 pages, LIFO batch:7 [ 0.000000] HighMem zone: 1792 pages used for memmap [ 0.000000] HighMem zone: 210688 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 7 pages/cpu @c1295000 s7488 r8192 d12992 u32768 [ 0.000000] pcpu-alloc: s7488 r8192 d12992 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243200 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G vmalloc=768M androidboot.console=ttyO2 omap_wdt.timer_margin=30 console=ttyO2,115200 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 256MB 702MB = 958MB total [ 0.000000] Memory: 961800k/1923600k available, 173552k reserved, 849920K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .init : 0xc0008000 - 0xc0050000 ( 288 kB) [ 0.000000] .text : 0xc0050000 - 0xc088a000 (8424 kB) [ 0.000000] .data : 0xc088a000 - 0xc0912d60 ( 548 kB) [ 0.000000] .bss : 0xc0912d84 - 0xc0a891f0 (1498 kB) [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:410 [ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Calibrating delay loop... 1392.74 BogoMIPS (lpj=5439488) [ 0.007873] pid_max: default: 32768 minimum: 301 [ 0.070648] Mount-cache hash table entries: 512 [ 0.071441] Initializing cgroup subsys debug [ 0.071441] Initializing cgroup subsys cpuacct [ 0.071502] Initializing cgroup subsys freezer [ 0.071502] CPU: Testing write buffer coherency: ok [ 0.072021] L310 cache controller enabled [ 0.072021] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x5e470000, Cache size: 1048576 B [ 0.150207] CPU1: Booted secondary processor [ 0.165771] Brought up 2 CPUs [ 0.220550] SMP: Total of 2 processors activated (2792.83 BogoMIPS). [ 0.220794] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw [ 0.224090] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr [ 0.224090] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1 [ 0.224090] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2 [ 0.224121] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe [ 0.224121] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg [ 0.224151] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per [ 0.224151] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup [ 0.224182] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private [ 0.224182] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if [ 0.224182] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for thermal_sensor [ 0.224182] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ohci [ 0.224334] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci [ 0.224334] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck. [ 0.224334] omap_hwmod: l4_div_ck: missing clockdomain for l4_div_ck. [ 0.228332] _omap4_module_wait_ready: Timeout waiting for module enable (mcpdm_fck: clkctrl = 0x30002) [ 0.229797] omap_hwmod: mcpdm: cannot be enabled (3) [ 0.235046] print_constraints: dummy: [ 0.235046] NET: Registered protocol family 16 [ 0.235900] GPMC revision 6.0 [ 0.236145] EMIF0 is enabled with IRQ142 [ 0.237243] EMIF1 is enabled with IRQ143 [ 0.237243] Last reset was cold reset (PRM_RSTST=0x1) [ 0.237274] [ 0.237518] OMAP GPIO hardware version 0.1 [ 0.238952] omap_mux_init: Add partition: #1: core, flags: 2 [ 0.238952] omap_mux_init: Add partition: #2: wkup, flags: 2 [ 0.241729] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [ 0.242431] omap_hwmod_mux_init: Could not allocate device mux entry [ 0.462707] Modem NOT detected [ 0.462707] Modem state properly updated to state 0 [ 0.471740] omap_disp_led_init: Configuring as one display LED [ 0.598236] HSI: skipping omap_device registration [ 0.598663] OMAP DMA hardware revision 0.0 [ 0.598663] omap_rproc_get_pool: dsp - no carveout memory is available at all [ 0.599273] omap_rproc_get_pool: ipu - carveout memory is unavailable: 0x0, 0x0 [ 0.609130] bio: create slab at 0 [ 0.609527] print_constraints: vwl1271: 1800 mV [ 0.609527] i2c-core: driver [twl] using legacy suspend method [ 0.609527] i2c-core: driver [twl] using legacy resume method [ 0.609527] SCSI subsystem initialized [ 0.611938] usbcore: registered new interface driver usbfs [ 0.611938] usbcore: registered new interface driver hub [ 0.612182] usbcore: registered new device driver usb [ 0.612823] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz [ 0.612915] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 0.617248] twl6030: PIH (irq 39) chaining IRQs 368..387 [ 0.619934] print_constraints: VUSB: 3300 mV normal standby [ 0.623321] twl6030_usb twl6030_usb: Initialized TWL6030 USB module [ 0.623931] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby [ 0.624725] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby [ 0.625549] print_constraints: VUSIM: 1200 <--> 2900 mV at 1800 mV normal standby [ 0.626739] print_constraints: VCXIO: 1800 mV normal standby [ 0.627899] print_constraints: VDAC: 1800 mV normal standby [ 0.628509] print_constraints: VAUX1_6030: 1000 <--> 3000 mV at 2800 mV normal standby [ 0.629058] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby [ 0.629852] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby [ 0.631164] print_constraints: VDD1: [ 0.632598] print_constraints: VDD2: [ 0.633392] print_constraints: VDD3: [ 0.634155] print_constraints: VMEM: at 1125 mV [ 0.635467] print_constraints: V2V1: at 2100 mV [ 0.636627] print_constraints: VANA: 2100 mV normal standby [ 0.637634] print_constraints: CLK32KG: [ 0.638427] print_constraints: CLK32KAUDIO: [ 0.639709] print_constraints: SYSEN: [ 0.640777] print_constraints: REGEN1: [ 0.641479] print_constraints: VOUT: 4075 <--> 4950 mV at 3825 mV normal standby [ 0.642089] tps6130x 1-0033: Revision 5 [ 0.642883] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz [ 0.643310] omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz [ 0.643859] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz [ 0.644317] omap-rproc omap-rproc.0: dsp is available [ 0.644317] omap-rproc omap-rproc.1: ipu is available [ 0.644317] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.645050] Bluetooth: Core ver 2.16 [ 0.645782] NET: Registered protocol family 31 [ 0.645782] Bluetooth: HCI device and connection manager initialized [ 0.645812] Bluetooth: HCI socket layer initialized [ 0.645812] Bluetooth: L2CAP socket layer initialized [ 0.645874] Bluetooth: SCO socket layer initialized [ 0.645904] Switching to clocksource 32k_counter [ 0.650177] Switched to NOHz mode on CPU #0 [ 0.650207] Switched to NOHz mode on CPU #1 [ 0.660552] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host) [ 0.661010] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 0.661010] musb-hdrc: MHDRC RTL version 2.0 [ 0.661010] musb-hdrc: setup fifo_mode 4 [ 0.661071] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 0.661071] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124 [ 0.661865] NET: Registered protocol family 2 [ 0.661956] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.661956] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.663391] TCP bind hash table entries: 16384 (order: 6, 393216 bytes) [ 0.663391] TCP: Hash tables configured (established 16384 bind 16384) [ 0.663391] TCP reno registered [ 0.664093] UDP hash table entries: 64 (order: 0, 4096 bytes) [ 0.664154] UDP-Lite hash table entries: 64 (order: 0, 4096 bytes) [ 0.664611] NET: Registered protocol family 1 [ 0.664947] RPC: Registered named UNIX socket transport module. [ 0.665100] RPC: Registered udp transport module. [ 0.665100] RPC: Registered tcp transport module. [ 0.665100] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.185424] omap_init_opp_table: no hwmod or odev for hsi, [22] cannot add OPPs. [ 1.185455] omap_init_opp_table: no hwmod or odev for hsi, [23] cannot add OPPs. [ 1.756469] ram_console: got buffer at 90000000, size 200000 [ 1.756469] ram_console: uncorrectable error in header [ 1.756713] ram_console: no valid data in buffer (sig = 0xaaaa2a4a) [ 1.756713] console [ram-1] enabled [ 1.777496] omap-iommu omap-iommu.0: ducati registered [ 1.777496] omap-iommu omap-iommu.1: tesla registered [ 1.920867] highmem bounce pool size: 64 pages [ 1.921142] ashmem: initialized [ 1.930328] fuse init (API version 7.16) [ 1.930328] msgmni has been set to 218 [ 1.930328] Registering char device tf_driver (122:0) [ 1.930328] SMCAG01.06p6.0 D [ 1.933685] io scheduler noop registered [ 1.933776] io scheduler deadline registered [ 1.933776] io scheduler cfq registered (default) [ 1.933776] start plist test [ 1.939239] end plist test [ 1.940093] OMAP DSS rev 4.0 [ 1.942565] Keyboard driver not present [ 1.959381] dsscomp: initializing. [ 1.960021] misc dsscomp: display0=taal [ 1.960021] misc dsscomp: display1=hdmi_panel [ 1.960021] misc dsscomp: found 2 displays and 4 overlays, WB overlay 1 [ 1.960754] could not allocate slot [ 1.961242] omap-rproc omap-rproc.1: powering up ipu [ 1.961761] virtio_rpmsg_bus virtio0: rpmsg backend virtproc probed successfully [ 1.961761] virtio_rpmsg_bus virtio1: rpmsg backend virtproc probed successfully [ 1.962402] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0 [ 1.963531] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1 [ 1.964538] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2 [ 3.290008] console [ttyO2] enabled [ 3.294128] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3 [ 3.302978] omap_ion_probe: adding heap secure_input of type 2 with fa300000@5a00000 [ 3.311676] omap_ion_probe: adding heap secure_output_wfdhdcp of type 2 with f9300000@800000 [ 3.321105] omap_ion_probe: adding heap tiler of type 4 with eb9c0000@7040000 [ 3.329162] omap_ion_probe: adding heap nonsecure_tiler of type 4 with eb600000@3c0000 [ 3.336700] omap_ion_probe: adding heap system of type 0 with 0@0 [ 3.341461] omap_ion_probe: adding heap tiler_reservation of type 5 with 0@0 [ 3.357116] brd: module loaded [ 3.367370] loop: module loaded [ 3.367370] (stk) :sysfs entries created [ 3.375549] (stk) : debugfs entries created [ 3.390441] ks8851 spi1.0: message enable is 0 [ 3.400695] ks8851 spi1.0: eth0: revision 1, MAC de:4c:51:3a:1e:98, IRQ 194 [ 3.408569] PPP generic driver version 2.4.2 [ 3.413452] PPP Deflate Compression module registered [ 3.419342] PPP BSD Compression module registered [ 3.425354] PPP MPPE Compression module registered [ 3.430786] NET: Registered protocol family 24 [ 3.435791] tun: Universal TUN/TAP device driver, 1.6 [ 3.443450] tun: (C) 1999-2004 Max Krasnyansky [ 3.450561] usbcore: registered new interface driver asix [ 3.456787] usbcore: registered new interface driver cdc_ether [ 3.463348] usbcore: registered new interface driver net1080 [ 3.469757] usbcore: registered new interface driver cdc_subset [ 3.474273] usbcore: registered new interface driver zaurus [ 3.482818] cdc_ncm: 04-Aug-2011 [ 3.482818] usbcore: registered new interface driver cdc_ncm [ 3.492858] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.505493] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 4.511901] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 4.520324] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00 [ 4.536804] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 4.543273] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.550903] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.558929] usb usb1: Product: OMAP-EHCI Host Controller [ 4.564941] usb usb1: Manufacturer: Linux 3.0.31-01713-gbdaabe6 ehci_hcd [ 4.572387] usb usb1: SerialNumber: ehci-omap.0 [ 4.578094] hub 1-0:1.0: USB hub found [ 4.582305] hub 1-0:1.0: 3 ports detected [ 4.615081] usbcore: registered new interface driver cdc_acm [ 4.621368] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 4.630310] Initializing USB Mass Storage driver... [ 4.635894] usbcore: registered new interface driver usb-storage [ 4.642669] USB Mass Storage support registered. [ 4.648010] usbcore: registered new interface driver usbserial [ 4.654602] usbserial: USB Serial Driver core [ 4.661193] android_usb gadget: Mass Storage Function, version: 2009/09/11 [ 4.668914] android_usb gadget: Number of LUNs=1 [ 4.674102] lun0: LUN: removable file: (no medium) [ 4.679901] android_usb gadget: android_usb ready [ 4.685302] musb-hdrc musb-hdrc: MUSB HDRC host driver [ 4.691101] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 2 [ 4.699279] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.706939] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.714965] usb usb2: Product: MUSB HDRC host driver [ 4.720581] usb usb2: Manufacturer: Linux 3.0.31-01713-gbdaabe6 musb-hcd [ 4.728027] usb usb2: SerialNumber: musb-hdrc [ 4.733520] hub 2-0:1.0: USB hub found [ 4.737731] hub 2-0:1.0: 1 port detected [ 4.795471] mousedev: PS/2 mouse device common for all mice [ 4.802368] input: omap4-keypad as /devices/platform/omap/omap4-keypad/input/input0 [ 4.816864] tm12xx_ts: Synaptic TM12xx Touchscreen Driver found man id 1 (1) [ 4.829803] tm12xx_ts 2-004b: resetting device (reg 0x62) [ 4.973358] tm12xx_ts 2-004b: no button capabilities found [ 4.979522] tm12xx_ts: Synaptic TM12xx Touchscreen Driver found man id 1 (1) [ 4.988677] tm12xx_ts: product ID: TM1217 family:1 fw:9 [ 4.994812] input: syn_tm12xx_ts_1 as /devices/platform/omap/omap_i2c.2/i2c-2/2-004b/input/input1 [ 5.006134] tm12xx_ts 2-004b: device status: 0x0, no error [ 5.014770] tm12xx_ts 3-004b: resetting device (reg 0x62) [ 5.156127] tm12xx_ts 3-004b: no button capabilities found [ 5.168884] CMA3000 Acclerometer : Revision 10 [ 5.174530] tm12xx_ts: product ID: TM1217 family:1 fw:9 [ 5.180603] input: syn_tm12xx_ts_2 as /devices/platform/omap/omap_i2c.3/i2c-3/3-004b/input/input2 [ 5.191650] tm12xx_ts 3-004b: device status: 0x0, no error [ 5.224517] input: cma3000-acclerometer as /devices/virtual/input/input3 [ 5.271514] bh1780 3-0029: Ambient Light Sensor, Rev : 1 [ 5.277709] input: bh1780gli as /devices/virtual/input/input4 [ 5.285217] bmp085 4-0077: BMP085 ver. 2.0 found. [ 5.290710] input: bmp085 as /devices/virtual/input/input5 [ 5.297058] bmp085 4-0077: Succesfully initialized bmp085! [ 5.303619] twl6030_pwrbutton_probe: Enter [ 5.308624] input: twl6030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl6030_pwrbutton/input/input6 [ 5.322082] input: hmc5843 as /devices/virtual/input/input7 [ 5.328552] sfh7741_probe: Proximity sensor [ 5.333526] input: sfh7741 as /devices/platform/sfh7741.1/input/input8 [ 5.342010] twl_rtc twl_rtc: Power up reset detected. [ 5.348754] twl_rtc twl_rtc: Enabling TWL-RTC. [ 5.355743] using rtc device, twl_rtc, for alarms [ 5.360870] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 5.368225] i2c /dev entries driver [ 5.372833] lirc_dev: IR Remote Control driver registered, major 249 [ 5.380065] IR NEC protocol handler initialized [ 5.385131] IR RC5(x) protocol handler initialized [ 5.390563] IR RC6 protocol handler initialized [ 5.395629] IR JVC protocol handler initialized [ 5.400695] IR Sony protocol handler initialized [ 5.405914] IR RC5 (streamzap) protocol handler initialized [ 5.412139] IR LIRC bridge handler initialized [ 5.417144] Linux video capture interface: v2.00 [ 5.422485] usbcore: registered new interface driver uvcvideo [ 5.428955] USB Video Class driver (v1.1.0) [ 5.433776] dmm: probe base: fd300000, irq 145 [ 5.568603] twl6030_bci twl6030_bci: Battery Voltage at Bootup is 3676 mV [ 5.611267] lm75 3-0048: hwmon0: sensor 'tmp105' [ 5.621154] OMAP Watchdog Timer Rev 0x01: initial timeout 30 sec [ 5.629882] device-mapper: uevent: version 1.0.3 [ 5.635406] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 5.644989] Bluetooth: HCI UART driver ver 2.2 [ 5.650054] Bluetooth: HCI H4 protocol initialized [ 5.655517] Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0 [ 5.664428] (stc): st_register(2) [ 5.668212] (stc): chnl_id list empty :2 [ 5.672882] (stk) : st_kim_start [ 5.676330] cpuidle: using governor ladder [ 5.681365] cpuidle: using governor menu [ 5.692321] Registered led device: omap4:green:debug0 [ 5.698181] Registered led device: omap4:green:debug1 [ 5.704376] leds-gpio: probe of leds-gpio failed with error -16 [ 5.712921] Registered led device: omap4:green:chrg [ 5.718566] omap4430_sdp_display_probe:Enter [ 5.723449] Registered led device: lcd-backlight [ 5.730224] omap4430_sdp_display_probe:Exit [ 5.735107] omap4430_keypad_led_probe:Enter [ 5.739990] Registered led device: keyboard-backlight [ 5.749359] omap4430_keypad_led_probe:Exit [ 5.756500] usbcore: registered new interface driver usbhid [ 5.763824] usbhid: USB HID core driver [ 5.770599] logger: created 256K log 'log_main' [ 5.775787] logger: created 256K log 'log_events' [ 5.781250] logger: created 256K log 'log_radio' [ 5.786499] logger: created 256K log 'log_system' [ 5.791503] (stk) :ldisc_install = 1 [ 5.798248] thermal_sensor_set_temp: no cooling agents for domain cpu [ 5.805755] omap_report_temp:thermal_sensor_set_temp reports error [ 5.812957] thermal_sensor_set_temp: no cooling agents for domain cpu [ 5.820251] omap_temp_sensor omap_temp_sensor.0: omap_ondie_sensor : 'omap_temp_sensor' [ 5.829406] pcb_temp_sensor pcb_temp_sensor.0: pcb_sensor : 'pcb_temp_sensor' [ 5.837615] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0! [ 5.845947] OMAP HSI: HSI driver version 0.4.3 [ 5.851226] OMAP HSI: Platform DRIVER register FAILED: -19 [ 5.858001] usbcore: registered new interface driver snd-usb-audio [ 5.866363] mmc0: new high speed DDR MMC card at address 0001 [ 5.874481] SDP4430 SoC init [ 5.879486] mmcblk0: mmc0:0001 SEM32G 29.7 GiB [ 5.888580] mmcblk0boot0: mmc0:0001 SEM32G partition 1 1.00 MiB [ 5.895416] mmcblk0boot1: mmc0:0001 SEM32G partition 2 1.00 MiB [ 5.906188] Alternate GPT is invalid, using primary GPT. [ 5.912322] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 [ 5.921722] mmcblk0boot1: unknown partition table [ 5.929687] mmcblk0boot0: unknown partition table [ 5.942352] asoc: null-codec-dai <-> MultiMedia1 mapping ok [ 5.949920] asoc: null-codec-dai <-> MultiMedia2 mapping ok [ 5.957885] asoc: null-codec-dai <-> Voice mapping ok [ 5.964813] asoc: null-codec-dai <-> Tones mapping ok [ 5.971801] asoc: null-codec-dai <-> Vibra mapping ok [ 5.978332] asoc: null-codec-dai <-> MODEM mapping ok [ 5.984924] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok [ 5.993225] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok [ 6.001098] asoc: twl6040-dl1 <-> mcpdm-dl mapping ok [ 6.008911] asoc: dmic-hifi <-> omap-dmic-dai-0 mapping ok [ 6.017150] twl6040-codec twl6040-codec: ASoC: Failed to create Aux/FM Stereo In debugfs file [ 6.027709] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok [ 6.034484] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok [ 6.041137] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok [ 6.047973] asoc: twl6040-vib <-> mcpdm-vib mapping ok [ 6.054779] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok [ 6.062133] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok [ 6.069396] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok [ 6.076873] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok [ 6.083709] asoc: dmic-hifi <-> omap-dmic-abe-dai-0 mapping ok [ 6.091278] asoc: dmic-hifi <-> omap-dmic-abe-dai-1 mapping ok [ 6.098754] asoc: dmic-hifi <-> omap-dmic-abe-dai-2 mapping ok [ 6.106384] asoc: null-codec-dai <-> omap-abe-vxrec-dai mapping ok [ 6.115783] input: SDP4430 Headset Jack as /devices/platform/soc-audio/sound/card0/input9 [ 6.128601] asoc: hdmi-audio-codec <-> hdmi-audio-dai mapping ok [ 6.136016] ALSA device list: [ 6.139404] #0: TI OMAP4 Board [ 6.143005] #1: OMAP4HDMI [ 6.146301] GACT probability NOT on [ 6.150268] Mirror/redirect action on [ 6.154418] u32 classifier [ 6.157470] Actions configured [ 6.161346] Netfilter messages via NETLINK v0.30. [ 6.166687] nf_conntrack version 0.5.0 (15028 buckets, 60112 max) [ 6.174652] ctnetlink v0.93: registering with nfnetlink. [ 6.180725] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 6.188537] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 6.195434] xt_time: kernel timezone is -0000 [ 6.202789] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.209045] arp_tables: (C) 2002 David S. Miller [ 6.214263] TCP cubic registered [ 6.218872] NET: Registered protocol family 10 [ 6.231262] Mobile IPv6 [ 6.234100] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 6.240570] IPv6 over IPv4 tunneling driver [ 6.252075] NET: Registered protocol family 17 [ 6.257080] NET: Registered protocol family 15 [ 6.262145] mmc1: host does not support reading read-only switch. assuming write-enable. [ 6.262451] Bridge firewalling registered [ 6.275756] Bluetooth: RFCOMM TTY layer initialized [ 6.281250] Bluetooth: RFCOMM socket layer initialized [ 6.287078] Bluetooth: RFCOMM ver 1.11 [ 6.291259] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.297271] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 6.303894] mmc1: new high speed SDHC card at address b368 [ 6.304046] NET: Registered protocol family 35 [ 6.304473] NET: Registered protocol family 37 [ 6.304473] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 6.323669] mmcblk1: mmc1:b368 00000 3.74 GiB [ 6.333557] ThumbEE CPU extension supported. [ 6.333679] mmcblk1: p1 p2 p3 [ 6.341857] Registering SWP/SWPB emulation handler [ 6.353881] Reprogramming LPDDR2 timings to 400000000 Hz [ 6.360076] sr_init: No PMIC hook to init smartreflex [ 6.365936] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 6.374847] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 6.383728] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 6.392730] SmartReflex class 1.5 driver: initialized (86400000ms) [ 6.399932] cpufreq_interactive_input_connect: connect to syn_tm12xx_ts_1 [ 6.407623] cpufreq_interactive_input_connect: connect to syn_tm12xx_ts_2 [ 6.427429] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1203000Calib=1000000 margin=0 [ 6.438568] sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=1127000Calib=1050820 margin=13000 [ 6.450378] omap_cpu_thermal_manager:sensor 39000 avg sensor 0 pcb [ 6.457305] 0, delta 4271 hot spot 43271 [ 6.462127] omap_cpu_thermal_manager: hot spot temp 43271 - going into safe zone [ 6.474334] mmc2: card claims to support voltages below the defined range. These will be ignored. [ 6.484191] sr_class1p5_calib_work: iva Stop sampling: Voltage Nominal=950000 samples=4 [ 6.493255] sr_class1p5_calib_work: iva: Calibration complete: Voltage Nominal=950000Calib=860920 margin=13000 [ 6.529541] Power Management for TI OMAP4. [ 6.534240] OMAP4 PM: Static dependency added between MPUSS and DUCATI <-> L4_PER/CFG and L3_1. [ 6.544464] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 6.560974] mmc2: new high speed SDIO card at address 0001 [ 6.567657] clock: disabling unused clocks to save power [ 6.909271] cannot apply mgr(lcd) on inactive device [ 6.914855] omapfb omapfb: failed to apply dispc config [ 6.920745] cannot apply mgr(tv) on inactive device [ 6.926300] omapfb omapfb: failed to apply dispc config [ 6.932128] cannot apply mgr(lcd2) on inactive device [ 6.937866] omapfb omapfb: failed to apply dispc config [ 6.943023] (stk) :ldisc installation timeout [ 6.943054] (stk) :ldisc_install = 0 [ 6.990875] Invalid Device Structure [ 7.091613] taal display0: taal panel revision e3.85.7d [ 7.161865] sr_class1p5_calib_work: core Stop sampling: Voltage Nominal=962000 samples=17 [ 7.171234] sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=962000Calib=886240 margin=38000 [ 7.182708] sr_class1p5_calib_work: mpu Stop sampling: Voltage Nominal=1025000 samples=20 [ 7.192169] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1025000Calib=840000 margin=10000 [ 7.209167] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 7.226989] EXT2-fs (mmcblk1p2): warning: mounting ext3 filesystem as ext2 [ 7.234863] EXT2-fs (mmcblk1p2): warning: mounting unchecked fs, running e2fsck is recommended [ 7.687255] VFS: Mounted root (ext2 filesystem) on device 179:26. [ 7.694580] Freeing init memory: 288K [ 7.740447] init: could not import file 'init.modem.rc' from '/init.omap4blazeboard.rc' [ 7.753479] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. [ 8.091491] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1317000Calib=1090000 margin=0 [ 8.097808] keychord: using input dev omap4-keypad for fevent [ 8.108612] (stk) : timed out waiting for ldisc to be un-installed [ 8.185241] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1390000Calib=1330000 margin=0 [ 8.233795] (stk) :ldisc_install = 1 [ 9.388366] (stk) :ldisc installation timeout [ 9.393402] (stk) :ldisc_install = 0 [ 10.067535] omap-rproc omap-rproc.1: Loaded BIOS image ducati-m3.bin, size 5852836 [ 10.077453] rproc_check_poolmem: section size does not fit within carveout memory [ 10.085754] omap-rproc omap-rproc.1: static memory for IPU_MEM_IPC_VRING doesn't belong to poolmem [ 10.095520] omap-rproc omap-rproc.1: Failed to process the image: -28 [ 10.470123] init: cannot find '/system/bin/setup_fs', disabling 'setup_fs' [ 10.501861] HDCP: failed to load keys [ 10.506103] init: cannot find '/system/bin/rild', disabling 'ril-daemon' [ 10.508148] init: cannot execve('/system/vendor/bin/modem-detect.sh'): Permission denied [ 10.552490] (stk) : timed out waiting for ldisc to be un-installed [ 10.560913] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' [ 10.680847] (stk) :ldisc_install = 1 [ 10.736602] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead [ 10.748382] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead [ 10.759338] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead [ 10.866027] (stc): st_tty_open [ 10.869750] (stk) :line discipline installed [ 10.874877] (stk) :TIInit_10.6.15.bts [ 10.939422] android_usb: already disabled [ 10.944580] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead [ 10.955566] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead [ 10.959381] PVR: PVRCore_Init [ 10.960021] PVR: PVRSRVDriverProbe(pDevice=c78ac800) [ 10.960113] PVR: SGX register base: 0x56000000 [ 10.960113] PVR: SGX register size: 65535 [ 10.960144] PVR: SGX IRQ: 53 [ 10.960174] PVR: EnableSystemClocks: Enabling System Clocks [ 10.960540] PVR: PVRCore_Init: major device 246 [ 11.025939] warning: `adbd' uses 32-bit capabilities (legacy support in use) [ 11.033996] adb_open [ 11.036743] mtp_bind_config [ 11.040527] adb_bind_config shell@android:/ $ [ 11.445190] (stc): add_channel_to_table: id 2 [ 11.450408] (stc): st_register(3) [ 11.454193] (stc): add_channel_to_table: id 3 [ 11.459075] (stc): st_register(4) [ 11.465362] PVR: Installing MISR with cookie bf046560 [ 11.471252] (stc): add_channel_to_table: id 4 [ 11.476135] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie c701a800 [ 11.483917] PVR: OSUnMapPhysToLin: unmapping 65535 bytes from c8d20000 [ 11.490936] PVR: SysFinalise: Version string: SGX revision = 1.2.0 [ 11.497528] omaplfbOMAPLFBInit: Blitsville gc2d not present, blits disabled [ 11.505004] omaplfb: OMAPLFBInitIonOmap: Device 0: Requesting 2 TILER 2D framebuffers [ 12.699920] EMIF: Access error from EMIF0 SYS port - 1