Texas Instruments Inc X-Loader 1.41.0-gdd880470 (May 11 2013 - 14:16:33) OMAP4470: 1.5 GHz capable SOM Starting OS Bootloader from EMMC ... U-Boot 1.1.4-g622fcfe5 (May 10 2013 - 11:38:48) Load address: 0x80e80000 DRAM: 1024 MB Flash: 0 kB Using default environment In: serial Out: serial Err: serial Battery not detected efi partition table: ptbl slot: EMMC:(1). 256 128K xloader 512 256K bootloader 1024 128K misc 2048 16M efs 34816 16K crypto 34848 8M recovery 51232 8M boot 67616 512M system 1116192 256M cache 1640480 29630M userdata Net: KS8851SNL Hit any key to stop autoboot: 3  2  1  0 kernel @ 80308000 (4895096) ramdisk @ 81300000 (185156) I2C read: I/O error Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.34-01482-ge9515a7-dirty (vinod@odgeng02) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #11 SMP PREEMPT Sun May 12 20:48:09 PDT 2013 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP4 Blaze board [ 0.000000] Initialized persistent memory from a0000000-a01fffff [ 0.000000] cma: CMA: reserved 112 MiB at 99000000 [ 0.000000] Cannot detect omap type! [ 0.000000] Reserving 33554432 bytes SDRAM for VRAM [ 0.000000] cma: CMA: reserved 16 MiB at 95800000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] OMAP4: Map 0x96e00000 to 0xfe600000 for dram barrier [ 0.000000] OMAP4470 ES1.0 [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1b35000 s13056 r8192 d15616 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195584 [ 0.000000] Kernel command line: console=ttyO2,115200n8 androidboot.console=ttyO2 omap_wdt.timer_margin=30 vmalloc=496M omapfb.fb_opt=-1,-1,-1,1,864,480 vram=32M omapfb.vram=0:32M androidboot.serialno=0151313008011010 androidboot.bootloader=U-Boot_1.1.4-g622fcfe5 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 366MB 114MB 289MB 3MB = 772MB total [ 0.000000] Memory: 636572k/636572k available, 412004k reserved, 299008K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08f4000 (9136 kB) [ 0.000000] .init : 0xc08f4000 - 0xc094c300 ( 353 kB) [ 0.000000] .data : 0xc094e000 - 0xc09f2890 ( 659 kB) [ 0.000000] .bss : 0xc09f28b4 - 0xc0b6c3b0 (1511 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:626 [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000183] Calibrating delay loop... 1598.59 BogoMIPS (lpj=6242304) [ 0.070343] pid_max: default: 32768 minimum: 301 [ 0.070526] Security Framework initialized [ 0.070617] Mount-cache hash table entries: 512 [ 0.071716] Initializing cgroup subsys debug [ 0.071716] Initializing cgroup subsys cpuacct [ 0.071746] Initializing cgroup subsys freezer [ 0.071746] Initializing cgroup subsys net_cls [ 0.071807] CPU: Testing write buffer coherency: ok [ 0.071990] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.072235] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.072357] Setting up static identity map for 0x8068c570 - 0x8068c5c8 [ 0.072387] L310 cache controller enabled [ 0.072418] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1048576 B [ 0.072814] generating sar_ram layout... [ 0.072998] sar ram layout created [ 0.150695] CPU1: Booted secondary processor [ 0.220703] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.220733] CPU1: Unknown IPI message 0x1 [ 0.220733] Brought up 2 CPUs [ 0.220764] SMP: Total of 2 processors activated (3196.18 BogoMIPS). [ 0.228637] omap_hwmod: aess: _wait_target_disable failed [ 0.231353] omap_hwmod: dss_dispc: cannot be enabled (3) [ 0.234008] omap_hwmod: dss_dsi1: cannot be enabled (3) [ 0.236663] omap_hwmod: dss_dsi2: cannot be enabled (3) [ 0.239288] omap_hwmod: dss_hdmi: cannot be enabled (3) [ 0.241943] omap_hwmod: dss_rfbi: cannot be enabled (3) [ 0.244598] omap_hwmod: dss_venc: cannot be enabled (3) [ 0.248352] omap_hwmod: mcpdm: cannot be enabled (3) [ 0.250152] omap_device: cannot add global notifier for dev PM QoS [ 0.250640] dummy: [ 0.256286] NET: Registered protocol family 16 [ 0.269714] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.270080] GPMC revision 6.0 [ 0.271606] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.271667] OMAP GPIO hardware version 0.1 [ 0.271820] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.272003] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.272186] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.272338] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.272521] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.273620] omap_mux_init: Add partition: #1: core, flags: 2 [ 0.274383] omap_mux_init: Add partition: #2: wkup, flags: 2 [ 0.277130] Error setting wl12xx data [ 0.281188] dmm dmm: initialized all PAT entries [ 0.282653] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.282684] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.285980] omap-mcbsp.1: alias pad_fck already exists [ 0.286102] omap-mcbsp.2: alias pad_fck already exists [ 0.286254] omap-mcbsp.3: alias pad_fck already exists [ 0.286376] omap-mcbsp.4: alias pad_fck already exists [ 0.287109] OMAP DMA hardware revision 0.0 [ 0.287628] emif emif.1: emif_probe: device configured with addr = e098c000 and IRQ142 [ 0.287841] emif emif.2: emif_probe: device configured with addr = e098e000 and IRQ143 [ 0.289031] SmartReflex Recalibration delay = 86400000ms [ 0.289062] SmartReflex Class 1.5 initialized [ 0.289367] Reprogramming LPDDR2 timings to 800000000 Hz [ 0.297302] bio: create slab at 0 [ 0.297882] VBAT: 3750 mV [ 0.298095] vwl1271: 1800 mV [ 0.299011] SCSI subsystem initialized [ 0.299255] usbcore: registered new interface driver usbfs [ 0.299377] usbcore: registered new interface driver hub [ 0.299468] usbcore: registered new device driver usb [ 0.300354] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz [ 0.301269] twl_core: detected twl6032 rev.1 eepromrev.56 [ 0.302520] twl 1-0048: PIH (irq 39) chaining IRQs 416..436 [ 0.303466] LDOUSB: 3300 mV normal standby [ 1.017547] PC detected [ 1.017608] musb-omap2430 musb-omap2430: musb core is not yet ready [ 1.017913] twl6030_usb twl6030_usb: Initialized TWL6030 USB module [ 1.018798] VANA: 2100 mV normal standby [ 1.019439] CLK32KAUDIO: [ 1.020355] SYSEN: [ 1.021301] REGEN1: [ 1.021942] CLK32KG: [ 1.022216] V2V1: 2100 mV normal [ 1.022247] V2V1: supplied by SYSEN [ 1.022979] LDO5: 1200 <--> 3000 mV at 1800 mV normal standby [ 1.023864] LDO1: 1800 <--> 2500 mV at 1900 mV normal standby [ 1.024719] LDO7: 1200 <--> 2900 mV at 1800 mV normal standby [ 1.025848] LDO6: 1800 mV normal standby [ 1.026031] LDO6: supplied by V2V1 [ 1.027313] LDOLN: 1800 mV normal standby [ 1.027526] LDOLN: supplied by V2V1 [ 1.028411] LDO2: 1000 <--> 3000 mV at 2800 mV normal standby [ 1.029296] LDO4: 1200 <--> 2800 mV at 1800 mV normal standby [ 1.030181] LDO3: 1000 <--> 3000 mV at 1200 mV normal standby [ 1.031372] SMPS4: 1800 mV normal standby [ 1.032073] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz [ 1.032409] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 400 kHz [ 1.032928] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz [ 1.033508] Linux video capture interface: v2.00 [ 1.033569] sr_init: No PMIC hook to init smartreflex [ 1.034118] omap-iommu omap-iommu.0: dsp registered [ 1.034210] omap-iommu omap-iommu.1: ipu registered [ 1.034423] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 1.035034] Bluetooth: Core ver 2.16 [ 1.035064] NET: Registered protocol family 31 [ 1.035095] Bluetooth: HCI device and connection manager initialized [ 1.035095] Bluetooth: HCI socket layer initialized [ 1.035125] Bluetooth: L2CAP socket layer initialized [ 1.035125] Bluetooth: SCO socket layer initialized [ 1.036621] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 1.037048] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 1.037506] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 1.037536] Power Management for TI OMAP4XX/OMAP5XXX devices. [ 1.037872] omap_opp_set_min_rate: Missing opp info for hwmod dsp_c0 [ 1.037872] Forcing clock virt_dpll_dsp_ck to minimum rate 232750000 [ 1.037902] omap_opp_set_min_rate: Missing opp info for hwmod hsi [ 1.037902] Forcing clock hsi_fck to minimum rate 96000000 [ 1.038482] Switching to clocksource 32k_counter [ 1.056427] NET: Registered protocol family 2 [ 1.056732] IP route cache hash table entries: 16384 (order: 4, 65536 bytes) [ 1.057312] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.058288] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [ 1.059356] TCP: Hash tables configured (established 65536 bind 65536) [ 1.059387] TCP: reno registered [ 1.059387] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.059417] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.059722] NET: Registered protocol family 1 [ 1.060089] RPC: Registered named UNIX socket transport module. [ 1.060119] RPC: Registered udp transport module. [ 1.060119] RPC: Registered tcp transport module. [ 1.060119] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.060241] usbhs_omap usbhs_omap: ehci_logic_fck failed:-2 [ 1.061157] Trying to unpack rootfs image as initramfs... [ 1.074584] Freeing initrd memory: 180K [ 1.074859] NetWinder Floating Point Emulator V0.97 (double precision) [ 1.075653] omap-rproc.1: alias fck already exists [ 1.076263] persistent_ram: uncorrectable error in header [ 1.076263] persistent_ram: no valid data in buffer (sig = 0xcffa922c) [ 1.094848] sr_classp5_calib_work: smartreflex_core: Calibration complete: Voltage Nominal=1126000 Calib=1025500 Dyn=1075500 OPP_margin=0 total_margin=0 [ 1.094909] sr_classp5_calib_work: smartreflex_mpu: Calibration complete: Voltage Nominal=1200000 Calib=1076140 Dyn=1126140 OPP_margin=0 total_margin=0 [ 1.094940] sr_classp5_calib_work: smartreflex_iva: Calibration complete: Voltage Nominal=962000 Calib=810280 Dyn=860280 OPP_margin=0 total_margin=0 [ 1.095489] console [ram-1] enabled [ 1.230895] highmem bounce pool size: 64 pages [ 1.232116] fuse init (API version 7.18) [ 1.232452] msgmni has been set to 915 [ 1.234283] io scheduler noop registered [ 1.234374] io scheduler deadline registered [ 1.234588] io scheduler cfq registered (default) [ 1.236022] OMAP DSS rev 4.1 [ 1.260131] omapdss DSI error: can't get regulator for panel [ 1.273071] omapdss DSI error: can't get regulator for panel [ 1.289367] dsscomp: initializing. [ 1.289520] misc dsscomp: found 4 displays and 4 overlays, WB overlay 1 [ 1.290557] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1 [ 1.291107] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2 [ 2.392120] console [ttyO2] enabled [ 2.396453] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3 [ 2.404785] [drm] Initialized drm 1.1.0 20060810 [ 2.410064] omap_ion_probe: adding heap secure_input of type 2 with ba300000@5a00000 [ 2.418640] omap_ion_probe: adding heap tiler of type 4 with b4300000@6000000 [ 2.426452] omap_ion_probe: adding heap nonsecure_tiler of type 4 with a0200000@2000000 [ 2.435272] omap_ion_probe: adding heap system of type 0 with 0@0 [ 2.442047] omap_ion_probe: adding heap tiler_reservation of type 5 with 0@0 [ 2.457855] brd: module loaded [ 2.465484] loop: module loaded [ 2.469146] (stk) :sysfs entries created [ 2.473480] (stk) : debugfs entries created [ 2.478118] (hci_tty): inside hci_tty_init [ 2.483062] (hci_tty): allocated 252, 0 [ 2.487335] AK8975 compass driver: init [ 2.514678] NFC Driver for TI WiLink [ 2.518737] (nfcdrv) nfc_drv_probe: allocated major 250, minor 0 [ 2.526367] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.534423] omap2_mcspi omap2_mcspi.1: master is unqueued, this is deprecated [ 2.542724] omap2_mcspi omap2_mcspi.2: master is unqueued, this is deprecated [ 2.550872] omap2_mcspi omap2_mcspi.3: master is unqueued, this is deprecated [ 2.559051] omap2_mcspi omap2_mcspi.4: master is unqueued, this is deprecated [ 2.567138] tun: Universal TUN/TAP device driver, 1.6 [ 2.572753] tun: (C) 1999-2004 Max Krasnyansky [ 2.579650] ------------[ cut here ]------------ [ 2.584777] WARNING: at drivers/base/dd.c:259 driver_probe_device+0x1d8/0x224() [ 2.592803] Modules linked in: [ 2.596343] Backtrace: [ 2.599151] [] (dump_backtrace+0x0/0x10c) from [] (dump_stack+0x18/0x1c) [ 2.608428] r6:00000103 r5:c02e8c30 r4:00000000 r3:c09b0c50 [ 2.614990] [] (dump_stack+0x0/0x1c) from [] (warn_slowpath_common+0x54/0x6c) [ 2.624755] [] (warn_slowpath_common+0x0/0x6c) from [] (warn_slowpath_null+0x24/0x2c) [ 2.635253] r8:c09cfe74 r7:00000000 r6:d505d234 r5:c0a5ebc8 r4:d505d200 [ 2.642730] r3:00000009 [ 2.645874] [] (warn_slowpath_null+0x0/0x2c) from [] (driver_probe_device+0x1d8/0x224) [ 2.656463] [] (driver_probe_device+0x0/0x224) from [] (__driver_attach+0x94/0x98) [ 2.666625] r8:c08f4208 r7:00000000 r6:d505d234 r5:c09cfe74 r4:d505d200 [ 2.674163] r3:00000000 [ 2.677276] [] (__driver_attach+0x0/0x98) from [] (bus_for_each_dev+0x68/0x9c) [ 2.687103] r6:c02e8c7c r5:00000000 r4:c09cfe74 r3:c02e8c7c [ 2.693634] [] (bus_for_each_dev+0x0/0x9c) from [] (driver_attach+0x24/0x28) [ 2.703277] r6:d5066940 r5:c09cf7f4 r4:c09cfe74 [ 2.708679] [] (driver_attach+0x0/0x28) from [] (bus_add_driver+0x180/0x240) [ 2.718261] [] (bus_add_driver+0x0/0x240) from [] (driver_register+0x80/0x134) [ 2.728118] [] (driver_register+0x0/0x134) from [] (spi_register_driver+0x4c/0x60) [ 2.738342] r8:c08f4208 r7:c09f28c0 r6:00000000 r5:00000006 r4:d682e000 [ 2.745880] r3:00000000 [ 2.748962] [] (spi_register_driver+0x0/0x60) from [] (ks8851_init+0x14/0x1c) [ 2.758697] [] (ks8851_init+0x0/0x1c) from [] (do_one_initcall+0x11c/0x184) [ 2.768218] [] (do_one_initcall+0x0/0x184) from [] (kernel_init+0x104/0x1c4) [ 2.777862] [] (kernel_init+0x0/0x1c4) from [] (do_exit+0x0/0x804) [ 2.786621] Board Information: [ 2.786621] Revision : 0010 [ 2.786621] Serial : 0000000000000000 [ 2.786621] SoC Information: [ 2.786621] CPU : OMAP4470 [ 2.786621] Rev : ES1.0 [ 2.786621] Type : GP [ 2.786651] Production ID: 0002B975-000000F0 [ 2.786651] Die ID : 252C0000-28002FFF-01513130-08011010 [ 2.786651] [ 2.821655] ---[ end trace 1813c9bfe324e048 ]--- [ 2.826782] ks8851 spi1.0: message enable is 0 [ 2.834503] ks8851 spi1.0: eth0: revision 0, MAC 08:00:28:01:50:c9, IRQ 194, has EEPROM [ 2.843811] usbcore: registered new interface driver asix [ 2.849853] usbcore: registered new interface driver cdc_ether [ 2.856323] usbcore: registered new interface driver smsc95xx [ 2.862762] usbcore: registered new interface driver net1080 [ 2.869018] usbcore: registered new interface driver cdc_subset [ 2.875610] usbcore: registered new interface driver zaurus [ 2.881774] usbcore: registered new interface driver cdc_ncm [ 2.888427] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.897979] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 3.904541] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 3.913940] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00 [ 3.929199] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 3.935638] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.943115] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.951080] usb usb1: Product: OMAP-EHCI Host Controller [ 3.956909] usb usb1: Manufacturer: Linux 3.4.34-01482-ge9515a7-dirty ehci_hcd [ 3.964874] usb usb1: SerialNumber: ehci-omap.0 [ 3.970428] hub 1-0:1.0: USB hub found [ 3.974578] hub 1-0:1.0: 3 ports detected [ 4.007598] usbcore: registered new interface driver cdc_wdm [ 4.013793] Initializing USB Mass Storage driver... [ 4.019287] usbcore: registered new interface driver usb-storage [ 4.025878] USB Mass Storage support registered. [ 4.031127] usbcore: registered new interface driver libusual [ 4.037475] usbcore: registered new interface driver usbtest [ 4.043762] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 4.251129] musb-hdrc musb-hdrc: USB OTG mode controller at e0b18000 using DMA, IRQ 124 [ 4.260375] file system registered [ 4.265502] gadget: Mass Storage Function, version: 2009/09/11 [ 4.272064] gadget: Number of LUNs=1 [ 4.276123] lun0: LUN: removable file: (no medium) [ 4.281860] gadget: android_usb ready [ 4.486145] musb-hdrc musb-hdrc: MUSB HDRC host driver [ 4.491973] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 2 [ 4.500061] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.507537] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.515441] usb usb2: Product: MUSB HDRC host driver [ 4.520935] usb usb2: Manufacturer: Linux 3.4.34-01482-ge9515a7-dirty musb-hcd [ 4.528839] usb usb2: SerialNumber: musb-hdrc [ 4.534271] hub 2-0:1.0: USB hub found [ 4.538421] hub 2-0:1.0: 1 port detected [ 4.577850] mousedev: PS/2 mouse device common for all mice [ 4.584594] input: omap4-keypad as /devices/platform/omap4-keypad/input/input0 [ 4.599182] tm12xx_ts: Synaptic TM12xx Touchscreen Driver found man id 1 (1) [ 4.612152] tm12xx_ts 2-004b: resetting device (reg 0x62) [ 4.755340] tm12xx_ts: Synaptic TM12xx Touchscreen Driver found man id 1 (1) [ 4.763122] tm12xx_ts 2-004b: no button capabilities found [ 4.770690] tm12xx_ts: product ID: TM1217 family:1 fw:9 [ 4.776702] input: syn_tm12xx_ts_1 as /devices/platform/omap_i2c.2/i2c-2/2-004b/input/input1 [ 4.787261] tm12xx_ts 2-004b: device status: 0x0, no error [ 4.795166] tm12xx_ts 3-004b: resetting device (reg 0x62) [ 4.937652] tm12xx_ts 3-004b: no button capabilities found [ 4.950103] CMA3000 Acclerometer : Revision 10 [ 4.955627] tm12xx_ts: product ID: TM1217 family:1 fw:9 [ 4.961608] input: syn_tm12xx_ts_2 as /devices/platform/omap_i2c.3/i2c-3/3-004b/input/input2 [ 4.972045] tm12xx_ts 3-004b: device status: 0x0, no error [ 5.007537] input: cma3000-acclerometer as /devices/virtual/input/input3 [ 5.054626] twl6030_pwrbutton_probe: Enter [ 5.059448] input: twl6030_pwrbutton as /devices/platform/omap_i2c.1/i2c-1/1-0049/twl6030_pwrbutton/input/input4 [ 5.071899] bh1780 3-0029: Ambient Light Sensor, Rev : 1 [ 5.078002] input: bh1780gli as /devices/virtual/input/input5 [ 5.085449] bmp085 4-0077: BMP085 ver. 1.0 found. [ 5.090911] input: bmp085 as /devices/virtual/input/input6 [ 5.097076] bmp085 4-0077: Succesfully initialized bmp085! [ 5.103759] input: hmc5843 as /devices/virtual/input/input7 [ 5.110168] sfh7741_probe: Proximity sensor [ 5.114990] input: sfh7741 as /devices/platform/sfh7741.1/input/input8 [ 5.158081] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 5.164947] i2c /dev entries driver [ 5.169372] usbcore: registered new interface driver uvcvideo [ 5.175689] USB Video Class driver (1.1.1) [ 5.180419] Driver for 1-wire Dallas network protocol. [ 5.200500] twl6030_bci twl6030_bci: Battery Voltage at Bootup is 3606 mV [ 5.214691] report_temperature_delayed_work_fn: Fail to set temp [ 5.222290] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 30 sec [ 5.231170] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 5.242187] cpuidle: using governor ladder [ 5.247131] cpuidle: using governor menu [ 5.261810] omap4430_sdp_display_probe:Enter [ 5.267059] omap4430_sdp_display_probe:Exit [ 5.271728] omap4430_keypad_led_probe:Enter [ 5.277130] omap4430_keypad_led_probe:Exit [ 5.282104] usbcore: registered new interface driver usbhid [ 5.288238] usbhid: USB HID core driver [ 5.292755] ashmem: initialized [ 5.296264] logger: created 256K log 'log_main' [ 5.301300] logger: created 256K log 'log_events' [ 5.306610] logger: created 256K log 'log_radio' [ 5.312774] logger: created 256K log 'log_system' [ 5.320159] omap_governor_init: domain cpu slope 308 const -7896 [ 5.326843] thermal_get_slope:Getting slope is not supported for domain gpu [ 5.334503] thermal_get_offset:Getting offset is not supported for domain gpu [ 5.342315] omap_governor_init: domain gpu slope -22 const -22 [ 5.349395] tmp102_temp_sensor 4-0048: initialized [ 5.354949] rproc remoteproc0: ipu_c0 is available [ 5.360290] rproc remoteproc0: Note: remoteproc is still under development and considered experimental. [ 5.370605] rproc remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 5.382659] OMAP HSI: HSI driver version 0.4.4 [ 5.390869] usbcore: registered new interface driver snd-usb-audio [ 5.399902] aess aess: ABE Firmware version 9560 [ 5.440856] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok [ 5.448211] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok [ 5.456420] asoc: snd-soc-dummy-dai <-> Voice mapping ok [ 5.463287] asoc: snd-soc-dummy-dai <-> Tones mapping ok [ 5.469543] mmc0: new high speed MMC card at address 0001 [ 5.476348] asoc: snd-soc-dummy-dai <-> Vibra mapping ok [ 5.482238] mmcblk0: mmc0:0001 SEM32G 29.7 GiB [ 5.487457] asoc: snd-soc-dummy-dai <-> MODEM mapping ok [ 5.493316] mmcblk0boot0: mmc0:0001 SEM32G partition 1 2.00 MiB [ 5.499938] mmcblk0boot1: mmc0:0001 SEM32G partition 2 2.00 MiB [ 5.506805] asoc: snd-soc-dummy-dai <-> MultiMedia1 LP mapping ok [ 5.513610] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok [ 5.521575] Alternate GPT is invalid, using primary GPT. [ 5.521911] asoc: twl6040-legacy <-> mcpdm-legacy mapping ok [ 5.533691] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 [ 5.534088] asoc: dit-hifi <-> mcasp-legacy mapping ok [ 5.545257] asoc: dmic-hifi <-> omap-dmic mapping ok [ 5.546386] sr_classp5_calib_work: smartreflex_mpu: Calibration complete: Voltage Nominal=1387000 Calib=1392640 Dyn=1387000 OPP_margin=0 total_margin=0 [ 5.566040] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok [ 5.571899] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok [ 5.577484] mmcblk0boot1: unknown partition table [ 5.577606] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok [ 5.577758] asoc: twl6040-vib <-> mcpdm-vib mapping ok [ 5.577941] asoc: snd-soc-dummy-dai <-> omap-mcbsp.1 mapping ok [ 5.578124] asoc: snd-soc-dummy-dai <-> omap-mcbsp.1 mapping ok [ 5.578277] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok [ 5.578430] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok [ 5.578582] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok [ 5.578765] asoc: dmic-hifi <-> omap-dmic-abe-dai-0 mapping ok [ 5.578918] asoc: dmic-hifi <-> omap-dmic-abe-dai-1 mapping ok [ 5.579071] asoc: dmic-hifi <-> omap-dmic-abe-dai-2 mapping ok [ 5.579254] asoc: snd-soc-dummy-dai <-> omap-abe-vxrec-dai mapping ok [ 5.579406] asoc: snd-soc-dummy-dai <-> omap-abe-echo-dai mapping ok [ 5.580017] input: SDP4430 Headset Jack as /devices/platform/omap-abe-twl6040/sound/card0/input9 [ 5.669494] asoc: omap-hdmi-hifi <-> omap-hdmi-audio-dai mapping ok [ 5.676391] mmcblk0boot0: unknown partition table [ 5.676910] oprofile: using arm/armv7-ca9 [ 5.686065] GACT probability NOT on [ 5.689910] Mirror/redirect action on [ 5.693939] u32 classifier [ 5.696929] Actions configured [ 5.700653] Netfilter messages via NETLINK v0.30. [ 5.705871] nf_conntrack version 0.5.0 (11997 buckets, 47988 max) [ 5.712768] ctnetlink v0.93: registering with nfnetlink. [ 5.718627] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 5.726226] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 5.732727] xt_time: kernel timezone is -0000 [ 5.737762] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.743682] arp_tables: (C) 2002 David S. Miller [ 5.748748] TCP: cubic registered [ 5.752380] Initializing XFRM netlink socket [ 5.757171] NET: Registered protocol family 10 [ 5.762695] Mobile IPv6 [ 5.765411] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 5.771453] IPv6 over IPv4 tunneling driver [ 5.776763] NET: Registered protocol family 17 [ 5.781646] NET: Registered protocol family 15 [ 5.786621] Bridge firewalling registered [ 5.791107] Bluetooth: RFCOMM TTY layer initialized [ 5.796508] Bluetooth: RFCOMM socket layer initialized [ 5.802093] Bluetooth: RFCOMM ver 1.11 [ 5.806213] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.812042] Bluetooth: BNEP filters: protocol multicast [ 5.817779] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.824401] NET: Registered protocol family 35 [ 5.829315] NET: Registered protocol family 37 [ 5.834228] NET: Registered protocol family 40 [ 5.839141] mmc2: card claims to support voltages below the defined range. These will be ignored. [ 5.848815] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 5.857208] ThumbEE CPU extension supported. [ 5.861938] Registering SWP/SWPB emulation handler [ 5.872894] clock: disabling unused clocks to save power [ 5.883728] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 5.890228] mmc2: new high speed SDIO card at address 0001 [ 6.515106] cannot apply mgr(lcd) on inactive device [ 6.520812] cannot apply mgr(lcd) on inactive device [ 6.526641] omapfb omapfb: failed to apply dispc config [ 6.532592] cannot apply mgr(tv) on inactive device [ 6.537994] omapfb omapfb: failed to apply dispc config [ 6.543731] cannot apply mgr(lcd2) on inactive device [ 6.549224] omapfb omapfb: failed to apply dispc config [ 6.694854] taal display0: taal panel revision e3.84.7d [ 6.806976] gpio-keys gpio-keys: Failed to request GPIO 184, error -16 [ 6.814544] gpio-keys: probe of gpio-keys failed with error -16 [ 6.822723] twl_rtc twl_rtc: setting system clock to 2000-01-01 01:23:21 UTC (946689801) [ 6.832092] ALSA device list: [ 6.835601] #0: SDP4430 [ 6.838592] #1: OMAPHDMI [ 6.842041] Freeing init memory: 352K [ 6.851074] init: could not import file 'init.modem.rc' from '/init.omap4blazeboard.rc' [ 6.860534] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. [ 6.941253] init: could not open /dev/keychord [ 7.046478] sr_classp5_calib_work: smartreflex_core: Calibration complete: Voltage Nominal=980000 Calib=987520 Dyn=980000 OPP_margin=0 total_margin=0 [ 7.063323] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 7.078186] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null) [ 7.101959] EXT4-fs (mmcblk0p9): recovery complete [ 7.204620] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro [ 7.347106] rproc remoteproc0: skipping power up until last virtio device ipu_c0 [ 7.357116] virtio_rpmsg_bus virtio0: rpmsg host is online [ 7.363128] rproc remoteproc0: registered virtio0 (type 7) [ 7.369812] rproc remoteproc0: powering up ipu_c0 [ 7.374999] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/omap/omap_hsmmc.1/by-name/cache [ 7.403015] rproc remoteproc0: Booting fw image ducati-m3-core0.xem3, size 6684059 [ 7.411499] omap-iommu omap-iommu.1: ipu: version 2.1 [ 7.436767] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic [ 7.494201] EXT4-fs (mmcblk0p10): recovery complete [ 7.500762] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro [ 7.554199] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/omap/omap_hsmmc.1/by-name/userdata [ 7.597167] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic [ 7.669799] rproc remoteproc0: remote processor ipu_c0 is now up [ 7.678558] virtio_rpmsg_bus virtio1: rpmsg host is online [ 7.682495] init: cannot find '/system/bin/setup_fs', disabling 'setup_fs' [ 7.682922] init: cannot find '/system/bin/shm_service', disabling 'shm_service' [ 7.683990] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' [ 7.684295] init: cannot find '/system/bin/arxd', disabling 'arxd' [ 7.690277] HDCP: failed to load keys [ 7.690277] [ 7.692321] omap-rproc omap-rproc.1: received echo reply from ipu_c0 [ 7.693206] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x32 [ 7.693603] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x33 [ 7.693725] virtio_rpmsg_bus virtio0: creating channel rpmsg-omx0 addr 0x3c [ 7.694061] rpmsg_omx rpmsg-omx0: new OMX connection srv channel: 1024 -> 60! [ 7.754669] virtio_rpmsg_bus virtio1: creating channel rpmsg-omx1 addr 0x3c [ 7.755401] rpmsg_omx rpmsg-omx1: new OMX connection srv channel: 1024 -> 60! [ 7.755584] virtio_rpmsg_bus virtio1: creating channel omaprpc addr 0x3b [ 7.781555] rproc remoteproc0: registered virtio1 (type 7) [ 7.827331] Compat-wireless backport release: ol_r8.a5.08 [ 7.833740] Backport based on wl18xx.git ol_r8.a5.13 [ 7.839111] compat.git: wl18xx.git [ 8.125701] cfg80211: Calling CRDA to update world regulatory domain [ 8.151977] cfg80211: World regulatory domain updated: [ 8.158294] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.169342] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.180908] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.191864] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.202026] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.212005] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.623443] PVR: PVRCore_Init [ 8.640228] PVR: LinuxMMInit: Maximum page pool size: 10800 [ 8.646423] PVR: PVRSRVDriverProbe(pDevice=d68ea600) [ 8.654388] PVR: SGX register base: 0x56000000 [ 8.659210] PVR: SGX register size: 65535 [ 8.663513] PVR: SGX IRQ: 53 [ 8.666992] PVR: EnableSystemClocks: Enabling System Clocks [ 8.673645] PVR: PVRCore_Init: major device 245 [ 8.741699] sr_classp5_calib_work: smartreflex_core Stop sampling: Voltage Nominal=1190000 samples=12 [ 8.751678] sr_classp5_calib_work: smartreflex_core: Calibration complete: Voltage Nominal=1190000 Calib=1190080 Dyn=1190000 OPP_margin=0 total_margin=0 [ 8.822296] virtio_rpmsg_bus virtio1: creating channel rpmsg-resmgr addr 0x66 [ 8.966735] PVR: Installing MISR with cookie bf08587c [ 8.974365] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie c1c8da80 [ 8.982543] PVR: SysFinalise: Version string: SGX revision = 1.1.2 [ 8.992858] omaplfb: OMAPLFBInitFBDev: Device 2: invalid framebuffer size [ 9.002471] omaplfb: OMAPLFBInitFBDev: Device 1: invalid framebuffer size [ 9.011688] omaplfb OMAPLFBRegisterPVRDriver: Could not create ion client [ 9.019165] PVR_K:(Error): SysFinalise: Failed to register PVR driver with omaplfb [0, ] [ 9.027893] PVR_K:(Error): PVRSRVFinaliseSystem: SysFinalise failed (4) [0, ] [ 9.035614] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 9.087463] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 9.178466] EXT4-fs (mmcblk0p8): re-mounted. Opts: (null) [ 9.211486] EXT4-fs (mmcblk0p8): re-mounted. Opts: (null) [ 9.212371] wlcore: wl12xx driver version: jenkins-JB_kernel_mr1-355 [ 9.264709] wlcore: wl18xx driver version: jenkins-JB_kernel_mr1-355 [ 9.285156] (gps) gpsdrv_init: entered [ 9.359527] android_usb: already disabled [ 9.364135] android_usb: already disabled [ 9.368652] android_usb: already disabled [ 9.375885] warning: `adbd' uses 32-bit capabilities (legacy support in use) [ 9.384521] adb_open [ 9.387695] mtp_bind_config [ 9.391448] adb_bind_config shell@android:/ $ [ 9.597198] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 9.756713] virtio_rpmsg_bus virtio1: destroying channel rpmsg-resmgr addr 0x66 [ 9.847930] android_work: sent uevent USB_STATE=CONNECTED [ 9.857818] android_work: sent uevent USB_STATE=DISCONNECTED [ 9.939514] android_work: sent uevent USB_STATE=CONNECTED [ 9.946838] gadget: high-speed config #1: android [ 9.952758] android_work: sent uevent USB_STATE=CONFIGURED [ 10.106689] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 10.616333] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 11.125701] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 11.635223] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 12.144531] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 12.653961] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 13.163787] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 13.179290] sr_classp5_calib_work: smartreflex_mpu: Calibration complete: Voltage Nominal=1037000 Calib=936880 Dyn=986880 OPP_margin=0 total_margin=0 [ 13.881225] init: untracked pid 113 exited [ 13.917266] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 13.927246] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 14.062377] init: untracked pid 453 exited [ 14.436737] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 14.946197] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 15.455566] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 15.965026] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 16.475006] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 16.985107] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 17.495849] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 18.006103] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 18.516021] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 19.221557] init: untracked pid 466 exited [ 19.254272] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 19.264312] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 19.343566] init: untracked pid 473 exited [ 19.773773] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 20.283172] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 20.792572] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 21.302124] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 21.812255] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 22.322448] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 22.832855] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 23.343109] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 23.853515] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 24.561187] init: untracked pid 486 exited [ 24.595520] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ] [ 24.605438] PVR_K:(Error): BridgedDispatchKM: Initialisation failed. Driver unusable. [0, ]