GM: Constructor
GM: Thu Aug 09 10:16:53 2018
RSTD.Transmit("/Settings")
[10:16:53]  
[10:16:53]  ### Running Startup script: "C:\ti\mmwave_studio_01_00_00_00\mmWaveStudio\Scripts\Startup.lua" ###
[10:16:53]  RSTD.SetAndTransmit ("/Settings/Scripter/Display DateTime" , "1")
[10:16:53]  RSTD.SetAndTransmit ("/Settings/Scripter/DateTime Format" , "HH:mm:ss")
[10:16:53]  Scripter ignored: Attempt to UnBuild() again or before Build.
[10:16:53]  RSTD.SetVar ("/Settings/Clients/Client 0/Dll" , "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Clients\\\\LabClient.dll")
[10:16:53]  RSTD.SetVar ("/Settings/Clients/Client 0/Use" , "TRUE")
[10:16:53]  RSTD.SetVar ("/Settings/Clients/Client 1/Use" , "FALSE")
[10:16:53]  RSTD.SetVar ("/Settings/Clients/Client 2/Use" , "FALSE")
[10:16:53]  RSTD.SetVar ("/Settings/Clients/Client 3/Use" , "FALSE")
[10:16:53]  RSTD.SetVar ("/Settings/Clients/Client 4/Use" , "FALSE")
[10:16:53]  RSTD.SetVar ("/Settings/AL Client/AL Dll" , "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\RunTime\\SAL.dll")
[10:16:53]  RSTD.SetVar ("/Settings/Clients/Client 0/GuiDll" , "")
[10:16:53]  RSTD.SetVar ("/Settings/AutoUpdate/Enabled" , "TRUE")
[10:16:53]  RSTD.SetVar ("/Settings/AutoUpdate/Interval" , "1")
[10:16:53]  RSTD.SetVar ("/Settings/Monitors/UpdateDisplay" , "TRUE")
[10:16:53]  RSTD.SetVar ("/Settings/Monitors/OneClickStart" , "TRUE")
[10:16:53]  RSTD.SetVar ("/Settings/Automation/Automation Mode" , "false")
[10:16:53]  RSTD.Transmit("/")
[10:16:53]  RSTD.SaveSettings(): Settings saved to "C:\Users\Matthew\AppData\Roaming\RSTD\config.xml"
[10:16:53]  RSTD.Build()
[10:16:53]  RSTD.SaveSettings(): Settings saved to "C:\Users\Matthew\AppData\Roaming\RSTD\config.xml"
[10:16:53]  RSTD.Transmit("/")
[10:16:53]  RSTD.AL_Build()
[10:16:53]  RSTD.AL_LoadXml()
[10:16:53]  RSTD.Transmit("/")
[10:16:53]  RSTD.AL_Init()
[10:16:53]  RSTD.Clients_Build()
[10:16:53]  GM: Init
[10:16:53]  GM: Loaded 'C:\ti\mmwave_studio_01_00_00_00\mmWaveStudio\Clients\\LabClient.dll'
[10:16:53]  GM: 1 Guest (s) init
[10:16:53]  GM: 1 Module(s) init
[10:16:53]  GM: 2 Tab   (s) init
[10:16:53]  RSTD.Client_LoadXml()
[10:16:54]  [RadarAPI]: Starting Matlab Engine..
[10:16:56]  [RadarAPI]: Matlab Engine Started!
[10:17:00]  [RadarAPI]: ar1.LoadSettings('C:\Users\Matthew\AppData\Roaming\RSTD\ar1gui.ini')
[10:17:00]  TESTING = false
[10:17:00]  
[10:17:00]  ***Script completed successfully.***
[10:17:27]  [RadarAPI]: Opening Gpio Control Port()
[10:17:27]  [RadarAPI]: Status: Passed
[10:17:27]  [RadarAPI]: Opening Board Control Port()
[10:17:27]  [RadarAPI]: Status: Passed
[10:17:28]  [RadarAPI]: ar1.FullReset()
[10:17:28]  [RadarAPI]: Status: Passed
[10:17:29]  [RadarAPI]: Closing Board Control Port()
[10:17:29]  [RadarAPI]: Status: Passed
[10:17:29]  [RadarAPI]: Closing Gpio Control Port()
[10:17:29]  [RadarAPI]: Status: Passed
[10:17:29]  [RadarAPI]: ar1.SOPControl(2)
[10:17:29]  [RadarAPI]: Status: Passed
[10:17:31]  [RadarAPI]: ar1.Connect(4,921600,1000)
[10:17:33]  [RadarAPI]: Warning: Connected with baudrate 115200
[10:17:35]  [RadarAPI]: Warning: Disconnected existing BaudRate
[10:17:35]  [RadarAPI]: Warning: Trying to connect with baudrate 921600
[10:17:36]  [RadarAPI]: ar1.Calling_IsConnected()
[10:17:37]  [RadarAPI]: ar1.SelectChipVersion("XWR1243")
[10:17:37]  [RadarAPI]: Status: Passed
[10:17:38]  [RadarAPI]: ar1.SelectChipVersion("XWR1243")
[10:17:38]  [RadarAPI]: Status: Passed
[10:17:38]  [RadarAPI]: ar1.SaveSettings('C:\Users\Matthew\AppData\Roaming\RSTD\ar1gui.ini')
[10:17:43]  [RadarAPI]: ar1.ReadRegister(0xffffe210, 0, 31)
[10:17:43]  [RadarAPI]: Value : 100000 
[10:17:43]  [RadarAPI]: ar1.ReadRegister(0xffffe218, 0, 31)
[10:17:43]  [RadarAPI]: Value : 12 
[10:17:43]  [RadarAPI]: ar1.DownloadBSSFw("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\radarss\\xwr12xx_xwr14xx_radarss_ES2.0.bin")
[10:17:43]  [RadarAPI]: Downloading BSS ROM Legacy Binary..
[10:17:49]  BSS FW Download Success
[10:17:51]  [RadarAPI]: ar1.DownloadMSSFw("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\masterss\\xwr12xx_xwr14xx_masterss_ES2.0.bin")
[10:17:51]  [RadarAPI]: Downloading MSS Legacy Binary..
[10:17:55]  MSS FW Download Success
[10:17:57]  [RadarAPI]: ar1.PowerOn(0, 1000, 0, 0)
[10:17:57]  MSS power up done async event received!
[10:17:57]  [RadarAPI]: Status: Passed
[10:17:57]  [RadarAPI]: ar1.SaveSettings('C:\Users\Matthew\AppData\Roaming\RSTD\ar1gui.ini')
[10:17:57]  Power On Success
[10:17:58]  BSS power up done async event received!
[10:17:58]  [RadarAPI]: ar1.RfEnable()
[10:17:58]  [RadarAPI]: Status: Passed
[10:17:59]  RF Enable Success
[10:18:00]  [RadarAPI]: ar1.ChanNAdcConfig(1, 1, 0, 1, 1, 1, 1, 2, 1, 0)
[10:18:00]  [RadarAPI]: Status: Passed
[10:18:00]  ChanNAdcConfig Success
[10:18:01]  [RadarAPI]: ar1.LPModConfig(0, 0)
[10:18:01]  [RadarAPI]: Status: Passed
[10:18:01]  Regualar mode Cfg Success
[10:18:03]  [RadarAPI]: ar1.RfInit()
[10:18:04]  RF Init async event received!
[10:18:04]  [RadarAPI]: Time stamp, Temperture: 5500,42; APLL Status, Update: 1, 0; SynthVCO1 Status, Update: 1, 1; SynthVCO2 Status, Update: 1, 1; LODist Status, Update: 1, 1; RxADCDC Status, Update: 1, 1; HPFcutoff Status, Update: 1, 1; LPFcutoff Status, Update: 1, 1; PeakDetector Status, Update: 1, 1; TxPower Status, Update: 1, 1; RxGain Status, Update: 1, 1; RxIQMM Status, Update: 1, 1; 
[10:18:04]  [RadarAPI]: Status: Passed
[10:18:04]  RfInit Success
[10:18:05]  [RadarAPI]: ar1.DataPathConfig(1, 1, 0)
[10:18:05]  [RadarAPI]: Status: Passed
[10:18:05]  DataPathConfig Success
[10:18:06]  [RadarAPI]: ar1.LvdsClkConfig(1, 1)
[10:18:06]  [RadarAPI]: Status: Passed
[10:18:06]  LvdsClkConfig Success
[10:18:07]  [RadarAPI]: ar1.LVDSLaneConfig(0, 1, 1, 1, 1, 1, 0, 0)
[10:18:07]  [RadarAPI]: Status: Passed
[10:18:07]  LVDSLaneConfig Success
[10:18:08]  [RadarAPI]: ar1.ProfileConfig(0, 77, 100, 6, 60, 0, 0, 0, 0, 0, 0, 29.982, 0, 256, 10000, 0, 0, 30)
[10:18:08]  [RadarAPI]: Status: Passed
[10:18:08]  ProfileConfig Success
[10:18:09]  [RadarAPI]: ar1.ChirpConfig(0, 0, 0, 0, 0, 0, 0, 1, 1, 0)
[10:18:09]  [RadarAPI]: Status: Passed
[10:18:09]  ChirpConfig Success
[10:18:10]  [RadarAPI]: ar1.DisableTestSource(0)
[10:18:10]  [RadarAPI]: Status: Passed
[10:18:10]  [RadarAPI]: ar1.FrameConfig(0, 0, 8, 128, 40, 0, 1)
[10:18:10]  [RadarAPI]: Status: Passed
[10:18:10]  FrameConfig Success
[10:18:11]  [RadarAPI]: ar1.SelectCaptureDevice("DCA1000")
[10:18:11]  [RadarAPI]: passed
[10:18:11]  SelectCaptureDevice Success
[10:18:12]  [RadarAPI]: StatusDCCard Event Registered
[10:18:12]  [RadarAPI]: Status: Passed
[10:18:12]  [RadarAPI]: ar1.CaptureCardConfig_EthInit("192.168.33.30", "192.168.33.180", "12:34:56:78:90:12", 4096, 4098)
[10:18:12]  [RadarAPI]: Status: Passed
[10:18:12]  [RadarAPI]: SYSTEM_CONNECT_CMD_CODE Async event recieved(9)
[10:18:12]  [RadarAPI]: ConnectRFDCCard Status: Passed
[10:18:12]  [RadarAPI]: Status: Passed
[10:18:12]  [RadarAPI]: READ_FPGA_VERSION_CMD_CODE event recieved(14)
[10:18:12]  [RadarAPI]: Status: Passed
[10:18:12]  CaptureCardConfig_EthInit Success
[10:18:13]  [RadarAPI]: ar1.ConfigureRFDCCardMode(1, 1, 1, 2, 3, 0)
[10:18:13]  [RadarAPI]: Status: Passed
[10:18:13]  [RadarAPI]: CONFIG_FPGA_GEN_CMD_CODE Async event recieved(3)
[10:18:13]  CaptureCardConfig_Mode Success
[10:18:14]  [RadarAPI]: ar1.CaptureCardConfig_PacketDelay(25)
[10:18:14]  [RadarAPI]: Status: Passed
[10:18:14]  [RadarAPI]: CONFIG_PACKET_DATA_CMD_CODE Async event recieved(11)
[10:18:14]  CaptureCardConfig_PacketDelay Success
[10:18:15]  [RadarAPI]: ar1.CaptureCardConfig_StartRecord("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data.bin", 1)
[10:18:15]  [RadarAPI]: Status: Passed
[10:18:15]  [RadarAPI]: RECORD_START_CMD_CODE Async event recieved(5)
[10:18:17]  [RadarAPI]: ar1.StartFrame()
[10:18:17]  [RadarAPI]: Status: Passed
[10:18:17]  Frame start async event received!
[10:18:17]  [RadarAPI]: Frame Ended
[10:18:17]  Frame End async event received!
[10:18:19]  Please wait for a few seconds for Packet reorder utility processing .....!!!! 
[10:18:19]  [RadarAPI]: Packet Reorder Utility Started...please wait...
[10:18:19]  [RadarAPI]: ar1.PacketReorderZeroFill("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data_Raw_0.bin", "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data.bin", "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\pktlogfile.txt")
[10:18:19]  [RadarAPI]: STS_RECORD_COMPLETED Async event recieved(8)
[10:18:19]  [RadarAPI]: ar1.CaptureCardConfig_StopRecord()
[10:18:19]  [RadarAPI]: Status: Passed
[10:18:19]  [RadarAPI]: RECORD_STOP_CMD_CODE Async event recieved(6)
[10:18:24]  [RadarAPI]: Packet Reorder Utility process completed!
[10:18:24]  Reordering required : NO
[10:18:24]  Packet loss : NO
[10:18:24]  Number of packets received : 2879
[10:18:24]  Number of zero filled packets : 0
[10:18:24]  Number of zero filled bytes : 0
[10:18:34]  Packet reorder utility processing done.....!!!! 
[10:18:34]  Please wait for a few seconds for matlab post processing .....!!!! 
[10:18:34]  [RadarAPI]: ar1.StartMatlabPostProc("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data.bin")
[10:18:44]  
[10:18:44]  ***Script completed successfully.***
[10:19:05]  [RadarAPI]: ar1.PowerOff()
[10:19:05]  [RadarAPI]: Status: Passed
[10:19:05]  [RadarAPI]: ar1.SaveSettings('C:\Users\Matthew\AppData\Roaming\RSTD\ar1gui.ini')
[10:19:06]  [RadarAPI]: Opening Gpio Control Port()
[10:19:06]  [RadarAPI]: Status: Passed
[10:19:06]  [RadarAPI]: ar1.Disconnect()
[10:19:06]  [RadarAPI]: ar1.Calling_ATE_DisconnectTarget()
[10:19:06]  [RadarAPI]: ar1.Calling_IsConnected()
[10:19:06]  [RadarAPI]: ar1.SaveSettings('C:\Users\Matthew\AppData\Roaming\RSTD\ar1gui.ini')
[10:19:06]  [RadarAPI]: Opening Board Control Port()
[10:19:06]  [RadarAPI]: Status: Passed
[10:19:07]  [RadarAPI]: ar1.FullReset()
[10:19:07]  [RadarAPI]: Status: Passed
[10:19:08]  [RadarAPI]: Closing Board Control Port()
[10:19:08]  [RadarAPI]: Status: Passed
[10:19:08]  [RadarAPI]: Closing Gpio Control Port()
[10:19:08]  [RadarAPI]: Status: Passed
[10:19:08]  [RadarAPI]: ar1.SOPControl(2)
[10:19:08]  [RadarAPI]: Status: Passed
[10:19:09]  [RadarAPI]: ar1.Connect(4,921600,1000)
[10:19:11]  [RadarAPI]: Warning: Connected with baudrate 115200
[10:19:12]  [RadarAPI]: Warning: Disconnected existing BaudRate
[10:19:13]  [RadarAPI]: Warning: Trying to connect with baudrate 921600
[10:19:14]  [RadarAPI]: ar1.Calling_IsConnected()
[10:19:15]  [RadarAPI]: ar1.SelectChipVersion("XWR1243")
[10:19:15]  [RadarAPI]: Status: Passed
[10:19:16]  [RadarAPI]: ar1.SelectChipVersion("XWR1243")
[10:19:16]  [RadarAPI]: Status: Passed
[10:19:16]  [RadarAPI]: ar1.SaveSettings('C:\Users\Matthew\AppData\Roaming\RSTD\ar1gui.ini')
[10:19:18]  [RadarAPI]: ar1.ReadRegister(0xffffe210, 0, 31)
[10:19:18]  [RadarAPI]: Value : 100000 
[10:19:18]  [RadarAPI]: ar1.ReadRegister(0xffffe218, 0, 31)
[10:19:18]  [RadarAPI]: Value : 12 
[10:19:18]  [RadarAPI]: ar1.DownloadBSSFw("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\radarss\\xwr12xx_xwr14xx_radarss_ES2.0.bin")
[10:19:18]  [RadarAPI]: Downloading BSS ROM Legacy Binary..
[10:19:24]  BSS FW Download Success
[10:19:26]  [RadarAPI]: ar1.DownloadMSSFw("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\masterss\\xwr12xx_xwr14xx_masterss_ES2.0.bin")
[10:19:26]  [RadarAPI]: Downloading MSS Legacy Binary..
[10:19:30]  MSS FW Download Success
[10:19:32]  MSS power up done async event received!
[10:19:32]  [RadarAPI]: ar1.PowerOn(0, 1000, 0, 0)
[10:19:32]  [RadarAPI]: Status: Passed
[10:19:32]  [RadarAPI]: ar1.SaveSettings('C:\Users\Matthew\AppData\Roaming\RSTD\ar1gui.ini')
[10:19:32]  Power On Success
[10:19:33]  BSS power up done async event received!
[10:19:33]  [RadarAPI]: ar1.RfEnable()
[10:19:33]  [RadarAPI]: Status: Passed
[10:19:34]  RF Enable Success
[10:19:35]  [RadarAPI]: ar1.ChanNAdcConfig(1, 1, 0, 1, 1, 1, 1, 2, 1, 0)
[10:19:35]  [RadarAPI]: Status: Passed
[10:19:35]  ChanNAdcConfig Success
[10:19:36]  [RadarAPI]: ar1.LPModConfig(0, 0)
[10:19:37]  [RadarAPI]: Status: Passed
[10:19:37]  Regualar mode Cfg Success
[10:19:39]  [RadarAPI]: ar1.RfInit()
[10:19:39]  RF Init async event received!
[10:19:39]  [RadarAPI]: Time stamp, Temperture: 5421,43; APLL Status, Update: 1, 0; SynthVCO1 Status, Update: 1, 1; SynthVCO2 Status, Update: 1, 1; LODist Status, Update: 1, 1; RxADCDC Status, Update: 1, 1; HPFcutoff Status, Update: 1, 1; LPFcutoff Status, Update: 1, 1; PeakDetector Status, Update: 1, 1; TxPower Status, Update: 1, 1; RxGain Status, Update: 1, 1; RxIQMM Status, Update: 1, 1; 
[10:19:39]  [RadarAPI]: Status: Passed
[10:19:39]  RfInit Success
[10:19:40]  [RadarAPI]: ar1.DataPathConfig(1, 1, 0)
[10:19:40]  [RadarAPI]: Status: Passed
[10:19:40]  DataPathConfig Success
[10:19:41]  [RadarAPI]: ar1.LvdsClkConfig(1, 1)
[10:19:41]  [RadarAPI]: Status: Passed
[10:19:41]  LvdsClkConfig Success
[10:19:42]  [RadarAPI]: ar1.LVDSLaneConfig(0, 1, 1, 1, 1, 1, 0, 0)
[10:19:42]  [RadarAPI]: Status: Passed
[10:19:42]  LVDSLaneConfig Success
[10:19:43]  [RadarAPI]: ar1.ProfileConfig(0, 77, 100, 6, 60, 0, 0, 0, 0, 0, 0, 29.982, 0, 256, 10000, 0, 0, 30)
[10:19:43]  [RadarAPI]: Status: Passed
[10:19:43]  ProfileConfig Success
[10:19:44]  [RadarAPI]: ar1.ChirpConfig(0, 0, 0, 0, 0, 0, 0, 1, 1, 0)
[10:19:44]  [RadarAPI]: Status: Passed
[10:19:44]  ChirpConfig Success
[10:19:45]  [RadarAPI]: ar1.DisableTestSource(0)
[10:19:45]  [RadarAPI]: Status: Passed
[10:19:45]  [RadarAPI]: ar1.FrameConfig(0, 0, 8, 128, 40, 0, 1)
[10:19:45]  [RadarAPI]: Status: Passed
[10:19:45]  FrameConfig Success
[10:19:46]  [RadarAPI]: ar1.SelectCaptureDevice("DCA1000")
[10:19:46]  [RadarAPI]: passed
[10:19:46]  SelectCaptureDevice Success
[10:19:47]  [RadarAPI]: StatusDCCard Event Registered
[10:19:47]  [RadarAPI]: Status: Passed
[10:19:47]  [RadarAPI]: ar1.CaptureCardConfig_EthInit("192.168.33.30", "192.168.33.180", "12:34:56:78:90:12", 4096, 4098)
[10:19:47]  [RadarAPI]: Status: Passed
[10:19:47]  [RadarAPI]: SYSTEM_CONNECT_CMD_CODE Async event recieved(9)
[10:19:47]  [RadarAPI]: ConnectRFDCCard Status: Passed
[10:19:47]  [RadarAPI]: Status: Passed
[10:19:47]  [RadarAPI]: READ_FPGA_VERSION_CMD_CODE event recieved(14)
[10:19:47]  [RadarAPI]: Status: Passed
[10:19:47]  CaptureCardConfig_EthInit Success
[10:19:48]  [RadarAPI]: ar1.ConfigureRFDCCardMode(1, 1, 1, 2, 3, 0)
[10:19:48]  [RadarAPI]: Status: Passed
[10:19:48]  [RadarAPI]: CONFIG_FPGA_GEN_CMD_CODE Async event recieved(3)
[10:19:48]  CaptureCardConfig_Mode Success
[10:19:49]  [RadarAPI]: ar1.CaptureCardConfig_PacketDelay(25)
[10:19:49]  [RadarAPI]: Status: Passed
[10:19:49]  [RadarAPI]: CONFIG_PACKET_DATA_CMD_CODE Async event recieved(11)
[10:19:49]  CaptureCardConfig_PacketDelay Success
[10:19:50]  [RadarAPI]: ar1.CaptureCardConfig_StartRecord("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data.bin", 1)
[10:19:50]  [RadarAPI]: Status: Passed
[10:19:50]  [RadarAPI]: RECORD_START_CMD_CODE Async event recieved(5)
[10:19:51]  [RadarAPI]: ar1.StartFrame()
[10:19:51]  [RadarAPI]: Status: Passed
[10:19:51]  Frame start async event received!
[10:19:52]  [RadarAPI]: Frame Ended
[10:19:52]  Frame End async event received!
[10:19:53]  Please wait for a few seconds for Packet reorder utility processing .....!!!! 
[10:19:53]  [RadarAPI]: Packet Reorder Utility Started...please wait...
[10:19:53]  [RadarAPI]: ar1.PacketReorderZeroFill("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data_Raw_0.bin", "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data.bin", "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\pktlogfile.txt")
[10:19:54]  [RadarAPI]: STS_RECORD_COMPLETED Async event recieved(8)
[10:19:54]  [RadarAPI]: ar1.CaptureCardConfig_StopRecord()
[10:19:54]  [RadarAPI]: Status: Passed
[10:19:54]  [RadarAPI]: RECORD_STOP_CMD_CODE Async event recieved(6)
[10:19:58]  [RadarAPI]: Packet Reorder Utility process completed!
[10:19:58]  Reordering required : NO
[10:19:58]  Packet loss : NO
[10:19:58]  Number of packets received : 2879
[10:19:58]  Number of zero filled packets : 0
[10:19:58]  Number of zero filled bytes : 0
[10:20:08]  Packet reorder utility processing done.....!!!! 
[10:20:08]  Please wait for a few seconds for matlab post processing .....!!!! 
[10:20:08]  [RadarAPI]: ar1.StartMatlabPostProc("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data.bin")
[10:20:18]  
[10:20:18]  ***Script completed successfully.***
[10:21:00]  [RadarAPI]: ar1.PowerOff()
[10:21:00]  [RadarAPI]: Status: Passed
[10:21:00]  [RadarAPI]: ar1.SaveSettings('C:\Users\Matthew\AppData\Roaming\RSTD\ar1gui.ini')
[10:21:00]  [RadarAPI]: Opening Gpio Control Port()
[10:21:00]  [RadarAPI]: Status: Passed
[10:21:01]  [RadarAPI]: ar1.Disconnect()
[10:21:01]  [RadarAPI]: ar1.Calling_ATE_DisconnectTarget()
[10:21:01]  [RadarAPI]: ar1.Calling_IsConnected()
[10:21:01]  [RadarAPI]: ar1.SaveSettings('C:\Users\Matthew\AppData\Roaming\RSTD\ar1gui.ini')
[10:21:01]  [RadarAPI]: Opening Board Control Port()
[10:21:01]  [RadarAPI]: Status: Passed
[10:21:02]  [RadarAPI]: ar1.FullReset()
[10:21:02]  [RadarAPI]: Status: Passed
[10:21:03]  [RadarAPI]: Closing Board Control Port()
[10:21:03]  [RadarAPI]: Status: Passed
[10:21:03]  [RadarAPI]: Closing Gpio Control Port()
[10:21:03]  [RadarAPI]: Status: Passed
[10:21:03]  [RadarAPI]: ar1.SOPControl(2)
[10:21:03]  [RadarAPI]: Status: Passed
[10:21:04]  [RadarAPI]: ar1.Connect(4,921600,1000)
[10:21:07]  [RadarAPI]: Warning: Connected with baudrate 115200
[10:21:08]  [RadarAPI]: Warning: Disconnected existing BaudRate
[10:21:08]  [RadarAPI]: Warning: Trying to connect with baudrate 921600
[10:21:10]  [RadarAPI]: ar1.Calling_IsConnected()
[10:21:11]  [RadarAPI]: ar1.SelectChipVersion("XWR1243")
[10:21:11]  [RadarAPI]: Status: Passed
[10:21:12]  [RadarAPI]: ar1.SelectChipVersion("XWR1243")
[10:21:12]  [RadarAPI]: Status: Passed
[10:21:12]  [RadarAPI]: ar1.SaveSettings('C:\Users\Matthew\AppData\Roaming\RSTD\ar1gui.ini')
[10:21:26]  [RadarAPI]: ar1.ReadRegister(0xffffe210, 0, 31)
[10:21:26]  [RadarAPI]: Value : 100000 
[10:21:26]  [RadarAPI]: ar1.ReadRegister(0xffffe218, 0, 31)
[10:21:26]  [RadarAPI]: Value : 12 
[10:21:26]  [RadarAPI]: ar1.DownloadBSSFw("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\radarss\\xwr12xx_xwr14xx_radarss_ES2.0.bin")
[10:21:27]  [RadarAPI]: Downloading BSS ROM Legacy Binary..
[10:21:32]  BSS FW Download Success
[10:21:34]  [RadarAPI]: ar1.DownloadMSSFw("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\masterss\\xwr12xx_xwr14xx_masterss_ES2.0.bin")
[10:21:34]  [RadarAPI]: Downloading MSS Legacy Binary..
[10:21:38]  MSS FW Download Success
[10:21:40]  MSS power up done async event received!
[10:21:40]  [RadarAPI]: ar1.PowerOn(0, 1000, 0, 0)
[10:21:40]  [RadarAPI]: Status: Passed
[10:21:40]  [RadarAPI]: ar1.SaveSettings('C:\Users\Matthew\AppData\Roaming\RSTD\ar1gui.ini')
[10:21:40]  Power On Success
[10:21:41]  BSS power up done async event received!
[10:21:41]  [RadarAPI]: ar1.RfEnable()
[10:21:41]  [RadarAPI]: Status: Passed
[10:21:43]  RF Enable Success
[10:21:44]  [RadarAPI]: ar1.ChanNAdcConfig(1, 1, 0, 1, 1, 1, 1, 2, 1, 0)
[10:21:44]  [RadarAPI]: Status: Passed
[10:21:44]  ChanNAdcConfig Success
[10:21:45]  [RadarAPI]: ar1.LPModConfig(0, 0)
[10:21:45]  [RadarAPI]: Status: Passed
[10:21:45]  Regualar mode Cfg Success
[10:21:47]  [RadarAPI]: ar1.RfInit()
[10:21:47]  RF Init async event received!
[10:21:47]  [RadarAPI]: Time stamp, Temperture: 5421,43; APLL Status, Update: 1, 0; SynthVCO1 Status, Update: 1, 1; SynthVCO2 Status, Update: 1, 1; LODist Status, Update: 1, 1; RxADCDC Status, Update: 1, 1; HPFcutoff Status, Update: 1, 1; LPFcutoff Status, Update: 1, 1; PeakDetector Status, Update: 1, 1; TxPower Status, Update: 1, 1; RxGain Status, Update: 1, 1; RxIQMM Status, Update: 1, 1; 
[10:21:47]  [RadarAPI]: Status: Passed
[10:21:47]  RfInit Success
[10:21:48]  [RadarAPI]: ar1.DataPathConfig(1, 1, 0)
[10:21:48]  [RadarAPI]: Status: Passed
[10:21:48]  DataPathConfig Success
[10:21:49]  [RadarAPI]: ar1.LvdsClkConfig(1, 1)
[10:21:49]  [RadarAPI]: Status: Passed
[10:21:49]  LvdsClkConfig Success
[10:21:50]  [RadarAPI]: ar1.LVDSLaneConfig(0, 1, 1, 1, 1, 1, 0, 0)
[10:21:50]  [RadarAPI]: Status: Passed
[10:21:50]  LVDSLaneConfig Success
[10:21:51]  [RadarAPI]: ar1.ProfileConfig(0, 77, 100, 6, 60, 0, 0, 0, 0, 0, 0, 29.982, 0, 256, 10000, 0, 0, 30)
[10:21:51]  [RadarAPI]: Status: Passed
[10:21:51]  ProfileConfig Success
[10:21:52]  [RadarAPI]: ar1.ChirpConfig(0, 0, 0, 0, 0, 0, 0, 1, 1, 0)
[10:21:52]  [RadarAPI]: Status: Passed
[10:21:52]  ChirpConfig Success
[10:21:53]  [RadarAPI]: ar1.DisableTestSource(0)
[10:21:53]  [RadarAPI]: Status: Passed
[10:21:53]  [RadarAPI]: ar1.FrameConfig(0, 0, 8, 128, 40, 0, 1)
[10:21:53]  [RadarAPI]: Status: Passed
[10:21:53]  FrameConfig Success
[10:21:54]  [RadarAPI]: ar1.SelectCaptureDevice("DCA1000")
[10:21:54]  [RadarAPI]: passed
[10:21:54]  SelectCaptureDevice Success
[10:21:55]  [RadarAPI]: StatusDCCard Event Registered
[10:21:55]  [RadarAPI]: Status: Passed
[10:21:55]  [RadarAPI]: ar1.CaptureCardConfig_EthInit("192.168.33.30", "192.168.33.180", "12:34:56:78:90:12", 4096, 4098)
[10:21:55]  [RadarAPI]: Status: Passed
[10:21:55]  [RadarAPI]: SYSTEM_CONNECT_CMD_CODE Async event recieved(9)
[10:21:55]  [RadarAPI]: ConnectRFDCCard Status: Passed
[10:21:55]  [RadarAPI]: Status: Passed
[10:21:55]  [RadarAPI]: READ_FPGA_VERSION_CMD_CODE event recieved(14)
[10:21:55]  [RadarAPI]: Status: Passed
[10:21:55]  CaptureCardConfig_EthInit Success
[10:21:56]  [RadarAPI]: ar1.ConfigureRFDCCardMode(1, 1, 1, 2, 3, 0)
[10:21:56]  [RadarAPI]: Status: Passed
[10:21:56]  [RadarAPI]: CONFIG_FPGA_GEN_CMD_CODE Async event recieved(3)
[10:21:56]  CaptureCardConfig_Mode Success
[10:21:57]  [RadarAPI]: ar1.CaptureCardConfig_PacketDelay(25)
[10:21:57]  [RadarAPI]: Status: Passed
[10:21:57]  [RadarAPI]: CONFIG_PACKET_DATA_CMD_CODE Async event recieved(11)
[10:21:57]  CaptureCardConfig_PacketDelay Success
[10:21:58]  [RadarAPI]: ar1.CaptureCardConfig_StartRecord("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data.bin", 1)
[10:21:58]  [RadarAPI]: Status: Passed
[10:21:58]  [RadarAPI]: RECORD_START_CMD_CODE Async event recieved(5)
[10:21:59]  [RadarAPI]: ar1.StartFrame()
[10:22:00]  [RadarAPI]: Status: Passed
[10:22:00]  Frame start async event received!
[10:22:00]  Frame End async event received!
[10:22:00]  [RadarAPI]: Frame Ended
[10:22:02]  Please wait for a few seconds for Packet reorder utility processing .....!!!! 
[10:22:02]  [RadarAPI]: Packet Reorder Utility Started...please wait...
[10:22:02]  [RadarAPI]: ar1.PacketReorderZeroFill("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data_Raw_0.bin", "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data.bin", "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\pktlogfile.txt")
[10:22:02]  [RadarAPI]: STS_RECORD_COMPLETED Async event recieved(8)
[10:22:02]  [RadarAPI]: ar1.CaptureCardConfig_StopRecord()
[10:22:02]  [RadarAPI]: Status: Passed
[10:22:02]  [RadarAPI]: RECORD_STOP_CMD_CODE Async event recieved(6)
[10:22:07]  [RadarAPI]: Packet Reorder Utility process completed!
[10:22:07]  Reordering required : NO
[10:22:07]  Packet loss : NO
[10:22:07]  Number of packets received : 2879
[10:22:07]  Number of zero filled packets : 0
[10:22:07]  Number of zero filled bytes : 0
[10:22:17]  Packet reorder utility processing done.....!!!! 
[10:22:17]  Please wait for a few seconds for matlab post processing .....!!!! 
[10:22:17]  [RadarAPI]: ar1.StartMatlabPostProc("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data.bin")
[10:22:27]  
[10:22:27]  ***Script completed successfully.***
[10:31:38]  [RadarAPI]: ar1.PowerOff()
[10:31:38]  [RadarAPI]: Status: Passed
[10:31:38]  [RadarAPI]: ar1.SaveSettings('C:\Users\Matthew\AppData\Roaming\RSTD\ar1gui.ini')
[10:31:39]  [RadarAPI]: Opening Gpio Control Port()
[10:31:39]  [RadarAPI]: Status: Passed
[10:31:39]  [RadarAPI]: ar1.Disconnect()
[10:31:39]  [RadarAPI]: ar1.Calling_ATE_DisconnectTarget()
[10:31:39]  [RadarAPI]: ar1.Calling_IsConnected()
[10:31:39]  [RadarAPI]: ar1.SaveSettings('C:\Users\Matthew\AppData\Roaming\RSTD\ar1gui.ini')
[10:31:39]  [RadarAPI]: Opening Board Control Port()
[10:31:39]  [RadarAPI]: Status: Passed
[10:31:40]  [RadarAPI]: ar1.FullReset()
[10:31:40]  [RadarAPI]: Status: Passed
[10:31:41]  [RadarAPI]: Closing Board Control Port()
[10:31:41]  [RadarAPI]: Status: Passed
[10:31:41]  [RadarAPI]: Closing Gpio Control Port()
[10:31:41]  [RadarAPI]: Status: Passed
[10:31:41]  [RadarAPI]: ar1.SOPControl(2)
[10:31:41]  [RadarAPI]: Status: Passed
[10:31:43]  [RadarAPI]: ar1.Connect(4,921600,1000)
[10:31:46]  [RadarAPI]: Warning: Connected with baudrate 115200
[10:31:47]  [RadarAPI]: Warning: Disconnected existing BaudRate
[10:31:47]  [RadarAPI]: Warning: Trying to connect with baudrate 921600
[10:31:48]  [RadarAPI]: ar1.Calling_IsConnected()
[10:31:49]  [RadarAPI]: ar1.SelectChipVersion("XWR1243")
[10:31:49]  [RadarAPI]: Status: Passed
[10:31:50]  [RadarAPI]: ar1.SelectChipVersion("XWR1243")
[10:31:50]  [RadarAPI]: Status: Passed
[10:31:50]  [RadarAPI]: ar1.SaveSettings('C:\Users\Matthew\AppData\Roaming\RSTD\ar1gui.ini')
[10:31:52]  [RadarAPI]: ar1.DownloadBSSFw("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\radarss\\xwr12xx_xwr14xx_radarss_ES2.0.bin")
[10:31:53]  [RadarAPI]: Downloading BSS ROM Legacy Binary..
[10:32:06]  [RadarAPI]: ar1.DownloadMSSFw("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\masterss\\xwr12xx_xwr14xx_masterss_ES2.0.bin")
[10:32:06]  [RadarAPI]: Downloading MSS Legacy Binary..
[10:32:12]  MSS power up done async event received!
[10:32:12]  [RadarAPI]: ar1.PowerOn(0, 1000, 0, 0)
[10:32:12]  [RadarAPI]: Status: Passed
[10:32:12]  [RadarAPI]: ar1.SaveSettings('C:\Users\Matthew\AppData\Roaming\RSTD\ar1gui.ini')
[10:32:14]  BSS power up done async event received!
[10:32:14]  [RadarAPI]: ar1.RfEnable()
[10:32:14]  [RadarAPI]: Status: Passed
[10:32:20]  [RadarAPI]: ar1.ChanNAdcConfig(1, 1, 0, 1, 1, 1, 1, 2, 1, 0)
[10:32:20]  [RadarAPI]: Status: Passed
[10:32:21]  [RadarAPI]: ar1.LPModConfig(0, 0)
[10:32:21]  [RadarAPI]: Status: Passed
[10:32:28]  [RadarAPI]: ar1.RfSetCalMonFreqTxPowLimitConfig(76, 76, 76, 81, 81, 81, 0, 0, 0)
[10:32:28]  [RadarAPI]: Status: Passed
[10:32:37]  [RadarAPI]: ar1.RfInit()
[10:32:37]  RF Init async event received!
[10:32:37]  [RadarAPI]: Time stamp, Temperture: 23155,44; APLL Status, Update: 1, 0; SynthVCO1 Status, Update: 1, 1; SynthVCO2 Status, Update: 1, 1; LODist Status, Update: 1, 1; RxADCDC Status, Update: 1, 1; HPFcutoff Status, Update: 1, 1; LPFcutoff Status, Update: 1, 1; PeakDetector Status, Update: 1, 1; TxPower Status, Update: 1, 1; RxGain Status, Update: 1, 1; RxIQMM Status, Update: 1, 1; 
[10:32:37]  [RadarAPI]: Status: Passed
[10:32:43]  [RadarAPI]: ar1.DataPathConfig(1, 1, 0)
[10:32:43]  [RadarAPI]: Status: Passed
[10:32:44]  [RadarAPI]: ar1.LvdsClkConfig(1, 1)
[10:32:44]  [RadarAPI]: Status: Passed
[10:32:45]  [RadarAPI]: ar1.LVDSLaneConfig(0, 1, 1, 1, 1, 1, 0, 0)
[10:32:45]  [RadarAPI]: Status: Passed
[10:32:49]  [RadarAPI]: ar1.ProfileConfig(0, 77, 100, 6, 60, 0, 0, 0, 0, 0, 0, 29.982, 0, 256, 10000, 0, 0, 30)
[10:32:49]  [RadarAPI]: Status: Passed
[10:32:51]  [RadarAPI]: ar1.ChirpConfig(0, 0, 0, 0, 0, 0, 0, 1, 0, 0)
[10:32:51]  [RadarAPI]: Status: Passed
[10:32:55]  [RadarAPI]: ar1.DisableTestSource(0)
[10:32:55]  [RadarAPI]: Status: Passed
[10:32:55]  [RadarAPI]: ar1.FrameConfig(0, 0, 8, 128, 40, 0, 1)
[10:32:55]  [RadarAPI]: Status: Passed
[10:32:57]  [RadarAPI]: ar1.SelectCaptureDevice("DCA1000")
[10:32:57]  [RadarAPI]: passed
[10:32:59]  [RadarAPI]: StatusDCCard Event Registered
[10:32:59]  [RadarAPI]: Status: Passed
[10:32:59]  [RadarAPI]: ar1.CaptureCardConfig_EthInit("192.168.33.30", "192.168.33.180", "12:34:56:78:90:12", 4096, 4098)
[10:33:01]  ConnectRFDCCard Status: RFDCCARD_UDP_WRITE_ERR
[10:33:01]  Ethernet Cable is disconnected Please check.....!!!
[10:33:43]  RSTD.ShowLogFile()
[10:34:15]  RSTD.ShowVerboseLogFile()
[10:34:57]  [RadarAPI]: ar1.PowerOff()
[10:34:57]  [RadarAPI]: Status: Passed
[10:34:57]  [RadarAPI]: ar1.SaveSettings('C:\Users\Matthew\AppData\Roaming\RSTD\ar1gui.ini')
[10:34:57]  [RadarAPI]: Opening Gpio Control Port()
[10:34:57]  [RadarAPI]: Status: Passed
[10:34:58]  [RadarAPI]: ar1.Disconnect()
[10:34:58]  [RadarAPI]: ar1.Calling_ATE_DisconnectTarget()
[10:34:58]  [RadarAPI]: ar1.Calling_IsConnected()
[10:34:58]  [RadarAPI]: ar1.SaveSettings('C:\Users\Matthew\AppData\Roaming\RSTD\ar1gui.ini')
[10:34:58]  [RadarAPI]: Opening Board Control Port()
[10:34:58]  [RadarAPI]: Status: Passed
[10:34:59]  [RadarAPI]: ar1.FullReset()
[10:34:59]  [RadarAPI]: Status: Passed
[10:35:00]  [RadarAPI]: Closing Board Control Port()
[10:35:00]  [RadarAPI]: Status: Passed
[10:35:00]  [RadarAPI]: Closing Gpio Control Port()
[10:35:00]  [RadarAPI]: Status: Passed
[10:35:00]  [RadarAPI]: ar1.SOPControl(2)
[10:35:00]  [RadarAPI]: Status: Passed
[10:35:01]  [RadarAPI]: ar1.Connect(4,921600,1000)
[10:35:04]  [RadarAPI]: Warning: Connected with baudrate 115200
[10:35:05]  [RadarAPI]: Warning: Disconnected existing BaudRate
[10:35:05]  [RadarAPI]: Warning: Trying to connect with baudrate 921600
[10:35:07]  [RadarAPI]: ar1.Calling_IsConnected()
[10:35:08]  [RadarAPI]: ar1.SelectChipVersion("XWR1243")
[10:35:08]  [RadarAPI]: Status: Passed
[10:35:09]  [RadarAPI]: ar1.SelectChipVersion("XWR1243")
[10:35:09]  [RadarAPI]: Status: Passed
[10:35:09]  [RadarAPI]: ar1.SaveSettings('C:\Users\Matthew\AppData\Roaming\RSTD\ar1gui.ini')
[10:35:12]  [RadarAPI]: ar1.ReadRegister(0xffffe210, 0, 31)
[10:35:12]  [RadarAPI]: Value : 100000 
[10:35:12]  [RadarAPI]: ar1.ReadRegister(0xffffe218, 0, 31)
[10:35:12]  [RadarAPI]: Value : 12 
[10:35:12]  [RadarAPI]: ar1.DownloadBSSFw("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\radarss\\xwr12xx_xwr14xx_radarss_ES2.0.bin")
[10:35:12]  [RadarAPI]: Downloading BSS ROM Legacy Binary..
[10:35:18]  BSS FW Download Success
[10:35:20]  [RadarAPI]: ar1.DownloadMSSFw("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\masterss\\xwr12xx_xwr14xx_masterss_ES2.0.bin")
[10:35:20]  [RadarAPI]: Downloading MSS Legacy Binary..
[10:35:23]  MSS FW Download Success
[10:35:26]  MSS power up done async event received!
[10:35:26]  [RadarAPI]: ar1.PowerOn(0, 1000, 0, 0)
[10:35:26]  [RadarAPI]: Status: Passed
[10:35:26]  [RadarAPI]: ar1.SaveSettings('C:\Users\Matthew\AppData\Roaming\RSTD\ar1gui.ini')
[10:35:26]  Power On Success
[10:35:27]  BSS power up done async event received!
[10:35:27]  [RadarAPI]: ar1.RfEnable()
[10:35:27]  [RadarAPI]: Status: Passed
[10:35:28]  RF Enable Success
[10:35:29]  [RadarAPI]: ar1.ChanNAdcConfig(1, 1, 0, 1, 1, 1, 1, 2, 1, 0)
[10:35:29]  [RadarAPI]: Status: Passed
[10:35:29]  ChanNAdcConfig Success
[10:35:30]  [RadarAPI]: ar1.LPModConfig(0, 0)
[10:35:30]  [RadarAPI]: Status: Passed
[10:35:30]  Regualar mode Cfg Success
[10:35:32]  [RadarAPI]: ar1.RfInit()
[10:35:32]  RF Init async event received!
[10:35:32]  [RadarAPI]: Time stamp, Temperture: 5421,44; APLL Status, Update: 1, 0; SynthVCO1 Status, Update: 1, 1; SynthVCO2 Status, Update: 1, 1; LODist Status, Update: 1, 1; RxADCDC Status, Update: 1, 1; HPFcutoff Status, Update: 1, 1; LPFcutoff Status, Update: 1, 1; PeakDetector Status, Update: 1, 1; TxPower Status, Update: 1, 1; RxGain Status, Update: 1, 1; RxIQMM Status, Update: 1, 1; 
[10:35:32]  [RadarAPI]: Status: Passed
[10:35:32]  RfInit Success
[10:35:33]  [RadarAPI]: ar1.DataPathConfig(1, 1, 0)
[10:35:33]  [RadarAPI]: Status: Passed
[10:35:33]  DataPathConfig Success
[10:35:34]  [RadarAPI]: ar1.LvdsClkConfig(1, 1)
[10:35:35]  [RadarAPI]: Status: Passed
[10:35:35]  LvdsClkConfig Success
[10:35:36]  [RadarAPI]: ar1.LVDSLaneConfig(0, 1, 1, 1, 1, 1, 0, 0)
[10:35:36]  [RadarAPI]: Status: Passed
[10:35:36]  LVDSLaneConfig Success
[10:35:37]  [RadarAPI]: ar1.ProfileConfig(0, 77, 100, 6, 60, 0, 0, 0, 0, 0, 0, 29.982, 0, 256, 10000, 0, 0, 30)
[10:35:37]  [RadarAPI]: Status: Passed
[10:35:37]  ProfileConfig Success
[10:35:38]  [RadarAPI]: ar1.ChirpConfig(0, 0, 0, 0, 0, 0, 0, 1, 1, 0)
[10:35:38]  [RadarAPI]: Status: Passed
[10:35:38]  ChirpConfig Success
[10:35:39]  [RadarAPI]: ar1.DisableTestSource(0)
[10:35:39]  [RadarAPI]: Status: Passed
[10:35:39]  [RadarAPI]: ar1.FrameConfig(0, 0, 8, 128, 40, 0, 1)
[10:35:39]  [RadarAPI]: Status: Passed
[10:35:39]  FrameConfig Success
[10:35:40]  [RadarAPI]: ar1.SelectCaptureDevice("DCA1000")
[10:35:40]  [RadarAPI]: passed
[10:35:40]  SelectCaptureDevice Success
[10:35:41]  [RadarAPI]: StatusDCCard Event Registered
[10:35:41]  [RadarAPI]: Status: Passed
[10:35:41]  [RadarAPI]: ar1.CaptureCardConfig_EthInit("192.168.33.30", "192.168.33.180", "12:34:56:78:90:12", 4096, 4098)
[10:35:41]  [RadarAPI]: Status: Failed, Error Type: RFDCCARD_OS_ERR
[10:35:43]  Ethernet Cable is disconnected Please check.....!!!
[10:35:43]  CaptureCardConfig_EthInit failure
[10:35:44]  [RadarAPI]: ar1.ConfigureRFDCCardMode(1, 1, 1, 2, 3, 0)
[10:35:44]  [RadarAPI]: Status: Failed, Error Type: RFDCCARD_UDP_WRITE_ERR
[10:35:44]  CaptureCardConfig_Mode failure
[10:35:45]  [RadarAPI]: ar1.CaptureCardConfig_PacketDelay(25)
[10:35:45]  [RadarAPI]: Status: Failed, Error Type: RFDCCARD_UDP_WRITE_ERR
[10:35:45]  CaptureCardConfig_PacketDelay failure
[10:35:46]  [RadarAPI]: ar1.CaptureCardConfig_StartRecord("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data.bin", 1)
[10:35:46]  [RadarAPI]: Status: Failed, Error Type: RFDCCARD_UDP_WRITE_ERR
[10:35:47]  [RadarAPI]: ar1.StartFrame()
[10:35:47]  [RadarAPI]: Status: Passed
[10:35:47]  Frame start async event received!
[10:35:47]  [RadarAPI]: Frame Ended
[10:35:47]  Frame End async event received!
[10:35:49]  Please wait for a few seconds for Packet reorder utility processing .....!!!! 
[10:35:49]  [RadarAPI]: Packet Reorder Utility Started...please wait...
[10:35:49]  [RadarAPI]: ar1.PacketReorderZeroFill("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data_Raw_0.bin", "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data.bin", "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\pktlogfile.txt")
[10:35:54]  [RadarAPI]: Packet Reorder Utility process completed!
[10:36:04]  Packet reorder utility processing done.....!!!! 
[10:36:04]  Please wait for a few seconds for matlab post processing .....!!!! 
[10:36:04]  [RadarAPI]: ar1.StartMatlabPostProc("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data.bin")
[10:36:04]  [RadarAPI]: Error: 
[10:36:04]  
[10:36:04]  ... MWMCR::EvaluateFunction error ... 
[10:36:04]  09-Aug-2018 10:36:04: The file C:\ti\mmwave_studio_01_00_00_00\mmWaveStudio\Scripts\..\PostProc\adc_data.bin is empty. Please capture more data.,1,
[10:36:04]  Error in => process_adc_data.m at line 52.
[10:36:04]  
[10:36:04]  ... Matlab M-code Stack Trace ...
[10:36:04]      at
[10:36:04]  file C:\Users\Matthew\AppData\Local\Temp\Matthew\mcrCache8.5.1\Matlab1\Logging\log_status.m, name log_status, line 32.
[10:36:04]      at
[10:36:04]  file C:\Users\Matthew\AppData\Local\Temp\Matthew\mcrCache8.5.1\Matlab1\Processing_functions\read_adc_data.m, name read_adc_data, line 28.
[10:36:04]      at
[10:36:04]  file C:\Users\Matthew\AppData\Local\Temp\Matthew\mcrCache8.5.1\Matlab1\MatlabPostPr\process_adc_data.m, name process_adc_data, line 52.
[10:36:04]  
[10:36:04]  
[10:36:04]  Trace:
[10:36:04]     at MathWorks.MATLAB.NET.Utility.MWMCR.EvaluateFunction(String functionName, Int32 numArgsOut, Int32 numArgsIn, MWArray[] argsIn)
[10:36:04]     at MathWorks.MATLAB.NET.Utility.MWMCR.EvaluateFunction(Int32 numArgsOut, String functionName, MWArray[] argsIn)
[10:36:04]     at MatlabPostProcGui.MatlabPostProcGUIClass.process_adc_data(MWArray adc_file_name, MWArray force_cont_stream_mode)
[10:36:04]     at AR1xController.frmAR1Main.iStartMtlabPostProc()
[10:36:11]  RSTD.ShowLogFile()
[10:36:14]  
[10:36:14]  ***Script completed successfully.***
[10:36:25]  RSTD.ShowVerboseLogFile()