GM: Constructor
GM: Thu Sep 13 11:14:00 2018
RSTD.Transmit("/Settings")
[11:14:00]  
[11:14:00]  ### Running Startup script: "C:\ti\mmwave_studio_01_00_00_00\mmWaveStudio\Scripts\Startup.lua" ###
[11:14:00]  RSTD.SetAndTransmit ("/Settings/Scripter/Display DateTime" , "1")
[11:14:00]  RSTD.SetAndTransmit ("/Settings/Scripter/DateTime Format" , "HH:mm:ss")
[11:14:00]  Scripter ignored: Attempt to UnBuild() again or before Build.
[11:14:00]  RSTD.SetVar ("/Settings/Clients/Client 0/Dll" , "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Clients\\\\LabClient.dll")
[11:14:00]  RSTD.SetVar ("/Settings/Clients/Client 0/Use" , "TRUE")
[11:14:00]  RSTD.SetVar ("/Settings/Clients/Client 1/Use" , "FALSE")
[11:14:00]  RSTD.SetVar ("/Settings/Clients/Client 2/Use" , "FALSE")
[11:14:00]  RSTD.SetVar ("/Settings/Clients/Client 3/Use" , "FALSE")
[11:14:00]  RSTD.SetVar ("/Settings/Clients/Client 4/Use" , "FALSE")
[11:14:00]  RSTD.SetVar ("/Settings/AL Client/AL Dll" , "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\RunTime\\SAL.dll")
[11:14:00]  RSTD.SetVar ("/Settings/Clients/Client 0/GuiDll" , "")
[11:14:00]  RSTD.SetVar ("/Settings/AutoUpdate/Enabled" , "TRUE")
[11:14:00]  RSTD.SetVar ("/Settings/AutoUpdate/Interval" , "1")
[11:14:00]  RSTD.SetVar ("/Settings/Monitors/UpdateDisplay" , "TRUE")
[11:14:00]  RSTD.SetVar ("/Settings/Monitors/OneClickStart" , "TRUE")
[11:14:00]  RSTD.SetVar ("/Settings/Automation/Automation Mode" , "false")
[11:14:00]  RSTD.Transmit("/")
[11:14:00]  RSTD.SaveSettings(): Settings saved to "C:\Users\omron\AppData\Roaming\RSTD\config.xml"
[11:14:00]  RSTD.Build()
[11:14:00]  RSTD.SaveSettings(): Settings saved to "C:\Users\omron\AppData\Roaming\RSTD\config.xml"
[11:14:00]  RSTD.Transmit("/")
[11:14:00]  RSTD.AL_Build()
[11:14:00]  RSTD.AL_LoadXml()
[11:14:00]  RSTD.Transmit("/")
[11:14:00]  RSTD.AL_Init()
[11:14:00]  RSTD.Clients_Build()
[11:14:00]  GM: Init
[11:14:00]  GM: Loaded 'C:\ti\mmwave_studio_01_00_00_00\mmWaveStudio\Clients\\LabClient.dll'
[11:14:00]  GM: 1 Guest (s) init
[11:14:00]  GM: 1 Module(s) init
[11:14:00]  GM: 2 Tab   (s) init
[11:14:00]  RSTD.Client_LoadXml()
[11:14:00]  [RadarAPI]: Starting Matlab Engine..
[11:14:02]  [RadarAPI]: Matlab Engine Started!
[11:14:06]  [RadarAPI]: ar1.LoadSettings('C:\Users\omron\AppData\Roaming\RSTD\ar1gui.ini')
[11:14:06]  TESTING = false
[11:14:06]  
[11:14:06]  ***Script completed successfully.***
šmmWave Studio start opration end.

šSet(1) in Connection tab
[11:15:35]  [RadarAPI]: Opening Gpio Control Port()
[11:15:35]  [RadarAPI]: Status: Passed
[11:15:35]  [RadarAPI]: Opening Board Control Port()
[11:15:35]  [RadarAPI]: Status: Passed
[11:15:36]  [RadarAPI]: ar1.FullReset()
[11:15:36]  [RadarAPI]: Status: Passed
[11:15:37]  [RadarAPI]: Closing Board Control Port()
[11:15:37]  [RadarAPI]: Status: Passed
[11:15:37]  [RadarAPI]: Closing Gpio Control Port()
[11:15:37]  [RadarAPI]: Status: Passed
[11:15:37]  [RadarAPI]: ar1.SOPControl(2)
[11:15:37]  [RadarAPI]: Status: Passed

šConnect(2) in Connection tab
  The Button Changed to "Disconnect(2)"
[11:16:19]  [RadarAPI]: ar1.Connect(9,921600,1000)
[11:16:22]  [RadarAPI]: Warning: Connected with baudrate 115200
[11:16:23]  [RadarAPI]: Warning: Disconnected existing BaudRate
[11:16:23]  [RadarAPI]: Warning: Trying to connect with baudrate 921600
[11:16:24]  [RadarAPI]: ar1.Calling_IsConnected()
[11:16:25]  [RadarAPI]: ar1.SelectChipVersion("XWR1443")
[11:16:25]  [RadarAPI]: Status: Passed
[11:16:26]  [RadarAPI]: ar1.SelectChipVersion("XWR1443")
[11:16:26]  [RadarAPI]: Status: Passed
[11:16:26]  [RadarAPI]: ar1.SaveSettings('C:\Users\omron\AppData\Roaming\RSTD\ar1gui.ini')

šPush "Run!" bottom of Connection tab
[11:17:46]  [RadarAPI]: ar1.ReadRegister(0xffffe210, 0, 31)
[11:17:46]  [RadarAPI]: Value : 100001 
[11:17:46]  [RadarAPI]: ar1.ReadRegister(0xffffe218, 0, 31)
[11:17:46]  [RadarAPI]: Value : 12 
[11:17:46]  [RadarAPI]: ar1.DownloadBSSFw("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\radarss\\xwr12xx_xwr14xx_radarss_ES2.0.bin")
[11:17:47]  [RadarAPI]: Downloading BSS ROM Legacy Binary..
[11:17:53]  BSS FW Download Success
[11:17:55]  [RadarAPI]: ar1.DownloadMSSFw("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\masterss\\xwr12xx_xwr14xx_masterss_ES2.0.bin")
[11:17:55]  [RadarAPI]: Downloading MSS Legacy Binary..
[11:17:59]  MSS FW Download Success
[11:18:01]  [RadarAPI]: ar1.PowerOn(0, 1000, 0, 0)
[11:18:01]  [RadarAPI]: Status: Passed
[11:18:01]  MSS power up done async event received!
[11:18:01]  [RadarAPI]: ar1.SaveSettings('C:\Users\omron\AppData\Roaming\RSTD\ar1gui.ini')
[11:18:01]  Power On Success
[11:18:02]  [RadarAPI]: ar1.RfEnable()
[11:18:02]  BSS power up done async event received!
[11:18:02]  [RadarAPI]: Status: Passed
[11:18:03]  RF Enable Success
[11:18:04]  [RadarAPI]: ar1.ChanNAdcConfig(1, 1, 0, 1, 1, 1, 1, 2, 1, 0)
[11:18:04]  [RadarAPI]: Status: Passed
[11:18:04]  ChanNAdcConfig Success
[11:18:05]  [RadarAPI]: ar1.LPModConfig(0, 0)
[11:18:05]  [RadarAPI]: Status: Passed
[11:18:05]  Regualar mode Cfg Success
[11:18:07]  [RadarAPI]: ar1.RfInit()
[11:18:08]  RF Init async event received!
[11:18:08]  [RadarAPI]: Time stamp, Temperture: 5384,34; APLL Status, Update: 1, 0; SynthVCO1 Status, Update: 1, 1; SynthVCO2 Status, Update: 1, 1; LODist Status, Update: 1, 1; RxADCDC Status, Update: 1, 1; HPFcutoff Status, Update: 1, 1; LPFcutoff Status, Update: 1, 1; PeakDetector Status, Update: 1, 1; TxPower Status, Update: 1, 1; RxGain Status, Update: 1, 1; RxIQMM Status, Update: 1, 1; 
[11:18:08]  [RadarAPI]: Status: Passed
[11:18:08]  RfInit Success
[11:18:09]  [RadarAPI]: ar1.DataPathConfig(1, 1, 0)
[11:18:09]  [RadarAPI]: Status: Passed
[11:18:09]  DataPathConfig Success
[11:18:10]  [RadarAPI]: ar1.LvdsClkConfig(1, 1)
[11:18:10]  [RadarAPI]: Status: Passed
[11:18:10]  LvdsClkConfig Success
[11:18:11]  [RadarAPI]: ar1.LVDSLaneConfig(0, 1, 1, 1, 1, 1, 0, 0)
[11:18:11]  [RadarAPI]: Status: Passed
[11:18:11]  LVDSLaneConfig Success
[11:18:12]  [RadarAPI]: ar1.ProfileConfig(0, 77, 100, 6, 60, 0, 0, 0, 0, 0, 0, 29.982, 0, 256, 10000, 0, 0, 30)
[11:18:12]  [RadarAPI]: Status: Passed
[11:18:12]  ProfileConfig Success
[11:18:13]  [RadarAPI]: ar1.ChirpConfig(0, 0, 0, 0, 0, 0, 0, 1, 1, 0)
[11:18:13]  [RadarAPI]: Status: Passed
[11:18:13]  ChirpConfig Success
[11:18:14]  [RadarAPI]: ar1.DisableTestSource(0)
[11:18:14]  [RadarAPI]: Status: Passed
[11:18:14]  [RadarAPI]: ar1.FrameConfig(0, 0, 8, 128, 40, 0, 1)
[11:18:14]  [RadarAPI]: Status: Passed
[11:18:14]  FrameConfig Success
[11:18:15]  [RadarAPI]: ar1.SelectCaptureDevice("DCA1000")
[11:18:15]  [RadarAPI]: passed
[11:18:15]  SelectCaptureDevice Success
[11:18:16]  [RadarAPI]: StatusDCCard Event Registered
[11:18:16]  [RadarAPI]: Status: Passed
[11:18:16]  [RadarAPI]: ar1.CaptureCardConfig_EthInit("192.168.33.30", "192.168.33.180", "12:34:56:78:90:12", 4096, 4098)
[11:18:16]  [RadarAPI]: Status: Passed
[11:18:16]  [RadarAPI]: SYSTEM_CONNECT_CMD_CODE Async event recieved(9)
[11:18:16]  [RadarAPI]: ConnectRFDCCard Status: Passed
[11:18:16]  [RadarAPI]: Status: Passed
[11:18:16]  [RadarAPI]: READ_FPGA_VERSION_CMD_CODE event recieved(14)
[11:18:16]  [RadarAPI]: Status: Passed
[11:18:16]  CaptureCardConfig_EthInit Success
[11:18:17]  [RadarAPI]: ar1.ConfigureRFDCCardMode(1, 1, 1, 2, 3, 0)
[11:18:17]  [RadarAPI]: Status: Passed
[11:18:17]  [RadarAPI]: CONFIG_FPGA_GEN_CMD_CODE Async event recieved(3)
[11:18:17]  CaptureCardConfig_Mode Success
[11:18:18]  [RadarAPI]: ar1.CaptureCardConfig_PacketDelay(25)
[11:18:18]  [RadarAPI]: Status: Passed
[11:18:18]  [RadarAPI]: CONFIG_PACKET_DATA_CMD_CODE Async event recieved(11)
[11:18:18]  CaptureCardConfig_PacketDelay Success
[11:18:19]  [RadarAPI]: ar1.CaptureCardConfig_StartRecord("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data.bin", 1)
[11:18:19]  [RadarAPI]: Status: Passed
[11:18:19]  [RadarAPI]: RECORD_START_CMD_CODE Async event recieved(5)
[11:18:20]  [RadarAPI]: ar1.StartFrame()
[11:18:20]  [RadarAPI]: Status: Passed
[11:18:20]  Frame start async event received!
[11:18:21]  [RadarAPI]: Frame Ended
[11:18:21]  Frame End async event received!
[11:18:22]  Please wait for a few seconds for Packet reorder utility processing .....!!!! 
[11:18:22]  [RadarAPI]: Packet Reorder Utility Started...please wait...
[11:18:22]  [RadarAPI]: ar1.PacketReorderZeroFill("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data_Raw_0.bin", "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data.bin", "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\pktlogfile.txt")
[11:18:23]  [RadarAPI]: STS_RECORD_COMPLETED Async event recieved(8)
[11:18:23]  [RadarAPI]: ar1.CaptureCardConfig_StopRecord()
[11:18:23]  [RadarAPI]: Status: Passed
[11:18:23]  [RadarAPI]: RECORD_STOP_CMD_CODE Async event recieved(6)
[11:18:27]  [RadarAPI]: Packet Reorder Utility process completed!
[11:18:27]  Reordering required : NO
[11:18:27]  Packet loss : NO
[11:18:27]  Number of packets received : 2879
[11:18:27]  Number of zero filled packets : 0
[11:18:27]  Number of zero filled bytes : 0
[11:18:37]  Packet reorder utility processing done.....!!!! 
[11:18:37]  Please wait for a few seconds for matlab post processing .....!!!! 
[11:18:37]  [RadarAPI]: ar1.StartMatlabPostProc("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data.bin")
[11:18:47]  
[11:18:47]  ***Script completed successfully.***
šDisplay Post Processing.
šClose Post Processing.
šLoad Config.

šStatic Config
šADC Config "Set"
[11:23:29]  [RadarAPI]: ar1.ChanNAdcConfig(1, 1, 1, 1, 1, 1, 1, 2, 1, 0)
[11:23:29]  [RadarAPI]: Status: Passed
šLP Mode "Set"
[11:23:44]  [RadarAPI]: ar1.LPModConfig(0, 0)
[11:23:44]  [RadarAPI]: Status: Passed
š"RF Init"
[11:24:14]  [RadarAPI]: ar1.RfInit()
[11:24:14]  RF Init async event received!
[11:24:14]  [RadarAPI]: Time stamp, Temperture: 371451,41; APLL Status, Update: 1, 0; SynthVCO1 Status, Update: 1, 1; SynthVCO2 Status, Update: 1, 1; LODist Status, Update: 1, 1; RxADCDC Status, Update: 1, 1; HPFcutoff Status, Update: 1, 1; LPFcutoff Status, Update: 1, 1; PeakDetector Status, Update: 1, 1; TxPower Status, Update: 1, 1; RxGain Status, Update: 1, 1; RxIQMM Status, Update: 1, 1; 
[11:24:14]  [RadarAPI]: Status: Passed

šDataConfig
šData Path Configration "Set"
[11:25:34]  [RadarAPI]: ar1.DataPathConfig(1, 1, 0)
[11:25:34]  [RadarAPI]: Status: Passed
šClock Configration "Set"
[11:25:52]  [RadarAPI]: ar1.LvdsClkConfig(1, 1)
[11:25:52]  [RadarAPI]: Status: Passed
šData Configration "Set"
[11:26:22]  [RadarAPI]: ar1.LVDSLaneConfig(0, 1, 1, 1, 1, 1, 0, 0)
[11:26:22]  [RadarAPI]: Status: Passed

šSensoreConfig
šSesor Configration Profile  "Set"
[11:29:13]  [RadarAPI]: ar1.ProfileConfig(0, 77, 15, 7, 114, 0, 0, 0, 0, 0, 0, 35.003, 1, 224, 2107, 0, 0, 30)
[11:29:13]  [RadarAPI]: Status: Passed
šSesor Configration Chirp
 šStart Chirp for cfg:0
 šEnd Chirp for cfg:0
 šTx:TX0
 š"Set"
[11:29:33]  [RadarAPI]: ar1.ChirpConfig(0, 0, 0, 0, 0, 0, 0, 1, 0, 0)
[11:29:33]  [RadarAPI]: Status: Passed
šSesor Configration Chirp
 šStart Chirp for cfg:1
 šEnd Chirp for cfg:1
 šTx:TX1
 š"Set"
[11:30:14]  [RadarAPI]: ar1.ChirpConfig(1, 1, 0, 0, 0, 0, 0, 0, 1, 0)
[11:30:14]  [RadarAPI]: Status: Passed
šSesor Configration Chirp
 šStart Chirp for cfg:2
 šEnd Chirp for cfg:2
 šTx:TX2
 š"Set"
[11:30:44]  [RadarAPI]: ar1.ChirpConfig(2, 2, 0, 0, 0, 0, 0, 0, 0, 1)
[11:30:44]  [RadarAPI]: Status: Passed
šSesor Configration Frame  "Set"
[11:31:49]  [RadarAPI]: ar1.DisableTestSource(0)
[11:31:49]  [RadarAPI]: Status: Passed
[11:31:49]  [RadarAPI]: ar1.FrameConfig(0, 2, 0, 16, 100, 0, 1)
[11:31:49]  [RadarAPI]: Status: Passed
šPush "Set up DCA 1000"
šOpen RFDataCapture Card
[11:32:14]  [RadarAPI]: ar1.SelectCaptureDevice("DCA1000")
[11:32:14]  [RadarAPI]: passed
šPush "Connect,Reset and"
[11:34:16]  [RadarAPI]: StatusDCCard Event Registered
[11:34:16]  [RadarAPI]: Status: Passed
[11:34:16]  [RadarAPI]: ar1.CaptureCardConfig_EthInit("192.168.33.30", "192.168.33.180", "12:34:56:78:90:12", 4096, 4098)
[11:34:19]  ConnectRFDCCard Status: RFDCCARD_UDP_WRITE_ERR
[11:34:19]  Ethernet Cable is disconnected Please check.....!!!
šThe Button still "Connect,Reset and"