Report Log

Preliminary Steps
- Compliance Suite Settings
  - Save Mode: Save all
  - Capture Raw File: Disabled
  - Capture Power Measurement: Disabled
  - VBus Output Self-Test: Enabled
  - VBus Measurements Self-Test: Enabled
- Analyzing Vendor Information File (VIF)...
- Making debounce values intermediate file...
- VBUS SELF-TEST : Voyager serial number #18033 pass
  - Teledyne LeCroy USB Compliance Suite Version: 6.01 Build 1040
  - Creating AutomationObj ...
  - Analyzer #0 Serial #18033
  - Update Expected_0V_Voltage in file Variables.inc to 30
  - Update do_VBusOutputSelfTest in file Variables.inc to 1
  - Update do_VBusMeasurementsSelfTest in file Variables.inc to 1
  - Update do_VBusOutputSelfTest in file Variables.ginc to 1
  - Update do_VBusMeasurementsSelfTest in file Variables.ginc to 1
  - Waiting for user action: In order to ensure the Exerciser is generating Vbus at safe levels, please ensure that nothing is connected to the Exerciser port and then press 'OK'.
  - Running "VBus Self-Test" module
  - Set Sync Id to []
  - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\VBusSelfTest.rec: Starting Recording
  - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\VBusSelfTest.updg: Starting PD Generation
  - Waiting... [maximum 15000 ms]
  - Generation Complete... 816 ms
  - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\VBusSelfTest.updg: Stopping PD Generation
  - Analyzer Trigged... 1352 ms
  - VBusSelfTest.rec: Stopping Recording at 1456 ms
  - Remove Sync Id
  - Trace is ready... 4176 ms
  - making a copy from Intermediate folder...
  - Update CVS_ID in file CVS_Parameters.inc to 16
  - Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
  - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\VBusSelfTest.vse: Running Verification Script
  - C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20220522_191730\USB Type-C\Preliminary\18033_VBusSelfTest.usb: Saving trace file
  - Trace saved... 4720 ms
  - Waiting for user action: VBus Self-Test complete. Connect the PUT to the Exerciser port and then press 'OK' to continue.
  - VBusSelfTest : Finished
    - AutomationObj was destroyed.
- Determine Cable type : Voyager serial number #18033 pass
  - Teledyne LeCroy USB Compliance Suite Version: 6.01 Build 1040
  - Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
  - Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
  - Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
  - Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
  - Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
  - Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
  - VIF initiated successfully!
  - CVS_Manager_Class::Initialize::Number of connected boards: 1
  - Argument(1)=18033
  - Argument(2)=0
  - Board_Class::ReadBoardInfo() for serial number #18033
  - Board_Class::BindUnit CVS_0 to #18033
  - Board_Class::ReadBoardInfo()::Board Name=Voyager M310P
  - Board_Class::ReadBoardInfo()::BoardID=130
  - Board_Class::ReadBoardInfo()::BoardRev=9
  - Board_Class::ReadBoardInfo()::Serial=18033
  - VIF Extraction
    - Extracting from component "AA" of file "C:\Users\JIAWAN\note\SNPS_TC_DEV.xml" ...
    - VIF_Product_Type = 0
    - PD_Port_Type = 0XFF
    - Connector_Type = 2
    - USB_PD_Support = NO
    - Type_C_State_Machine = 1
    - Captive_Cable = NO
    - Captive_Cable_Is_eMarked = 0xFF
    - USB4_Supported = NO
    - Type_C_Can_Act_As_Device = YES
    - Type_C_Is_Alt_Mode_Adapter = 0xFF
    - Device_Supports_USB_Data = YES
    - Device_Speed = 2
    - Device_Max_USB2_Speed = 2
    - Type_C_Can_Act_As_Host = NO
    - Host_Supports_USB_Data = 0XFF
    - Host_Speed = 0XFF
    - Type_C_Port_On_Hub = NO
    - Type_C_Supports_Audio_Accessory = NO
    - Type_C_Supports_Vconn_Powered_Accessory = 0XFF
    - Type_C_Is_Debug_Target_SRC = 0XFF
    - Type_C_Is_Debug_Target_SNK = YES
    - Type_C_Implements_Try_SRC = 0XFF
    - Type_C_Implements_Try_SNK = 0XFF
    - Host_Is_Embedded = 0XFF
  - Successfully finished VIF Extraction.
  - Update AnalyzerID in file VendorInformation.ginc to 16
  - Update AnalyzerID in file VendorInformation.inc to 16
  - Update BOARD_REV in file VendorInformation.ginc to 9
  - Update BOARD_REV in file VendorInformation.inc to 9
  - The test conditions are met and test is applicable to run.
  - Test_Class::RunCableDetection() for CVS_0
  - Running "Cable Detection" module to check the connected Cable and PUT...
  - RunModule_Class::ConfigModule(0,14,8000)
  - RunModule_Class::ConfigModule::GENERATION_WAIT_TIME -> 8000
  - RunModule_Class::ConfigModule(0,16,True)
  - RunModule_Class::ConfigModule::GENERATION_FAIL_IGNORANCE -> True
  - RunModule_Class::ConfigModule(0,12,GetCableDetectionVseValues)
  - RunModule_Class::ConfigModule::EXTRACT_VERIFIED_RESULTS -> GetCableDetectionVseValues
  - RunModule_Class::Run_Single(0)
  - Capture_Class::Run() on CVS_0
  - Board_Class::SetSyncGUID [{E4FC6DFC-9E92-4837-A0DA-F4A9DA9D05BF}]
  - Board_Class::SetAnalyzerParameters [1, 3]
  - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableDetection.rec: Starting Recording
  - RecordingOptions::ApplySettings()
  - RecordingOptions::ApplyTraceSettings()::[TC_CableDetection_cvs0.usb]
  - RecordingOptions::ApplySettings()::SetTraceFileName ->C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20220522_191730\USB Type-C\Preliminary\01_TC_CableDetection_cvs0.usb
  - RecordingOptions::ApplyGeneralSettings()
  - RecordingOptions::ApplyCapturePowerMeasurement()
  - RecordingOptions::ApplyRecordingBufferSize()
  - RecordingOptions::ApplyExtTriggerInRecOption()
  - RecordingOptions::ApplyExerciserConnectedName()[Synopsys-A-NA][]
  - RecordingOptions::ApplyUSB3Settings()
  - RecordingOptions::ApplyCaptureRawFile()
  - RecordingOptions::ApplyTypeCSettings()
  - RecordingOptions::ApplyCaptureCC_Traffic()
  - RecordingOptions::ApplyTypeCRoleSides()
  - RecordingOptions::ApplyUncertainSettingsTypeC()
  - Board_Class::StartRecording()
  - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableDetection.updg: Starting PD Generation
  - Waiting... [maximum 8000 ms]
  - Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18033 wait_time_msec=8000
  - Generation Complete... 2808 ms
  - Stopping PD Generation
  - Waiting for Trigger...
  - Analyzer Trigged... 3840 ms
  - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableDetection.rec: Stopping Recording at 3960 ms
  - Board_Class::StopRecordingAndWaitForTrace()
  - Board_Class::SetSyncGUID []
  - Trace is ready... 5888 ms
  - Check_Class::Verify() on Trace from CVS_0
  - Check_Class::Verify()::ErrorCode from relevant CVS = 0:
  - Check_Class::Verify()::Executing AlwaysApplicable
  - Update CVS_ID in file CVS_Parameters.inc to 16
  - Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
  - Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20220522_191730\USB Type-C\Preliminary\Debug\0
  - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableDetection.vse: Running Verification Script
  - Running Verification script : TC_CableDetection.vse
  - Running GetCableDetectionVseValues
  - CableDetection::Extracetd from VSE : PUT_Connected = YES
  - CableDetection::Extracetd from VSE : ConnectedCableType = VConn Pass-Thru
  - CableDetection::Extracetd from VSE : CableDirection = NORMAL
  - Verification Result: PASSED
  - Capture_Class::UpdateTraceFileName(1)
  - C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20220522_191730\USB Type-C\Preliminary\\01_TC_CableDetection_cvs0.usb: Saving trace file
  - Trace saved...
  - CableDetection_Class::Run_CableDetection::Result of Run_Single(0) = 1
  - Update DETECTED_CABLE_TYPE in file CableVariables.ginc to 2
  - Update DETECTED_CABLE_TYPE in file CableVariables.inc to 2
  - Update PUT_CONNECTED in file CableVariables.ginc to YES
  - Update PUT_CONNECTED in file CableVariables.inc to YES
  - Update CABLE_DIRECTION in file CableVariables.ginc to NORMAL
  - Update CABLE_DIRECTION in file CableVariables.inc to NORMAL
  - Running "Cable Orientation" module to check D+/D- lines on a Vconn-Pass-Through cable
  - Update Is_Host in file CableVariables.ginc to NO
  - Update Is_Host in file CableVariables.inc to NO
  - Update Is_Device in file CableVariables.ginc to YES
  - Update Is_Device in file CableVariables.inc to YES
  - Update USB2_DELAY in file CableVariables.ginc to 10
  - Update Is_Host in file CableVariables.ginc to NO
  - Update Is_Host in file CableVariables.inc to NO
  - RunModule_Class::ConfigModule(0,13,WaitGeneration_CableOrientation_USB2(this, wait_time_msec, diff_time, 10000))
  - RunModule_Class::ConfigModule::SPECIAL_GENERATION_WAIT -> WaitGeneration_CableOrientation_USB2(this, wait_time_msec, diff_time, 10000)
  - RunModule_Class::ConfigModule(0,12,GetCableOrientationVseValues)
  - RunModule_Class::ConfigModule::EXTRACT_VERIFIED_RESULTS -> GetCableOrientationVseValues
  - RunModule_Class::ConfigModule(0,14,15000)
  - RunModule_Class::ConfigModule::GENERATION_WAIT_TIME -> 15000
  - RunModule_Class::ConfigModule(0,15,False)
  - RunModule_Class::ConfigModule::RUN_EXTRA_GEN_AUTOMATICALLY -> False
  - RunModule_Class::ConfigModule(0,16,True)
  - RunModule_Class::ConfigModule::GENERATION_FAIL_IGNORANCE -> True
  - RunModule_Class::Run_Single(0)
  - Capture_Class::Run() on CVS_0
  - Board_Class::SetSyncGUID [{FC596975-FE9B-4EEE-88F2-6FECF5AAAC95}]
  - Board_Class::SetAnalyzerParameters [1, 3]
  - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableOrientation_Host.rec: Starting Recording
  - RecordingOptions::ApplySettings()
  - RecordingOptions::ApplyTraceSettings()::[TC_CableOrientation_Device.usb]
  - RecordingOptions::ApplySettings()::SetTraceFileName ->C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20220522_191730\USB Type-C\Preliminary\02_TC_CableOrientation_Device.usb
  - RecordingOptions::ApplyGeneralSettings()
  - RecordingOptions::ApplyCapturePowerMeasurement()
  - RecordingOptions::ApplyRecordingBufferSize()
  - RecordingOptions::ApplyExtTriggerInRecOption()
  - RecordingOptions::ApplyExerciserConnectedName()[Synopsys-A-NA][]
  - RecordingOptions::ApplyUSB3Settings()
  - RecordingOptions::ApplyCaptureRawFile()
  - RecordingOptions::ApplyTypeCSettings()
  - RecordingOptions::ApplyCaptureCC_Traffic()
  - RecordingOptions::ApplyTypeCRoleSides()
  - RecordingOptions::ApplyUncertainSettingsTypeC()
  - Board_Class::StartRecording()
  - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableOrientation.updg: Starting PD Generation
  - Waiting... [maximum 15000 ms]
  - Capture_Class::WaitForGenerationDone::Run custom function -> isGenDone = WaitGeneration_CableOrientation_USB2(this, wait_time_msec, diff_time, 10000)
  - Board_Class::WaitForPDGenerationPause() for CVS_0 : Serial#18033 wait_time_msec=15000
  - Pausing the generation... 16408 ms
  - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableOrientation_Host.utg: Starting USB2 Generation
  - Stopping USB2 Generation
  - Board_Class::ResumePDGeneration() for CVS_0 : Serial#18033
  - Resuming generation... 29480 ms
  - Board_Class::WaitForPDGenerationPause() for CVS_0 : Serial#18033 wait_time_msec=15000
  - Pausing the generation... 30088 ms
  - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableOrientation_Host.utg: Starting USB2 Generation
  - Stopping USB2 Generation
  - Board_Class::ResumePDGeneration() for CVS_0 : Serial#18033
  - Resuming generation... 43264 ms
  - Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18033 wait_time_msec=15000
  - Generation Complete... 27472 ms
  - Stopping PD Generation
  - Waiting for Trigger...
  - Analyzer Trigged... 28496 ms
  - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableOrientation_Host.rec: Stopping Recording at 28608 ms
  - Board_Class::StopRecordingAndWaitForTrace()
  - Board_Class::SetSyncGUID []
  - Trace is ready... 30736 ms
  - Check_Class::Verify() on Trace from CVS_0
  - Check_Class::Verify()::ErrorCode from relevant CVS = 0:
  - Check_Class::Verify()::Executing AlwaysApplicable
  - Update CVS_ID in file CVS_Parameters.inc to 16
  - Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
  - Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20220522_191730\USB Type-C\Preliminary\Debug\1
  - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableOrientation.vse: Running Verification Script
  - Running Verification script : TC_CableOrientation.vse
  - Running GetCableOrientationVseValues
  - Verification Result: PASSED
  - Capture_Class::UpdateTraceFileName(1)
  - C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20220522_191730\USB Type-C\Preliminary\\02_TC_CableOrientation_Device.usb: Saving trace file
  - Trace saved...
  - Default CC Line = CC_LINE_2
  - USB2 bMaxPacketSize = 64
  - USB2 BOS_Length = 50
  - USB2 Started = 1
  - Update bMaxPacketSize in file CableVariables.ginc to 64
  - Update BOS_Length in file CableVariables.ginc to 50
  - Update IS_USB2_STARTED in file CableVariables.ginc to 1
  - Update DEFAULT_CC_LINE in file CableVariables.ginc to CC_LINE_2
  - Update DEFAULT_CC_LINE in file CableVariables.inc to CC_LINE_2
  - TC_CableDetection : Finished
TD 4.3.3 Sink Connect Try.SRC DRP Test FAIL
- Teledyne LeCroy USB Compliance Suite Version: 6.01 Build 1040
- Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
- Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
- Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
- Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
- Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
- Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
- VIF initiated successfully!
- CVS_Manager_Class::Initialize::Number of connected boards: 1
- Argument(1)=18033
- Argument(2)=0
- Board_Class::ReadBoardInfo() for serial number #18033
- Board_Class::BindUnit CVS_0 to #18033
- Board_Class::ReadBoardInfo()::Board Name=Voyager M310P
- Board_Class::ReadBoardInfo()::BoardID=130
- Board_Class::ReadBoardInfo()::BoardRev=9
- Board_Class::ReadBoardInfo()::Serial=18033
- VIF Extraction
  - Extracting from component "AA" of file "C:\Users\JIAWAN\note\SNPS_TC_DEV.xml" ...
  - VIF_Product_Type = 0
  - PD_Port_Type = 0XFF
  - Connector_Type = 2
  - USB_PD_Support = NO
  - Type_C_State_Machine = 1
  - Captive_Cable = NO
  - Captive_Cable_Is_eMarked = 0xFF
  - USB4_Supported = NO
  - Type_C_Can_Act_As_Device = YES
  - Type_C_Is_Alt_Mode_Adapter = 0xFF
  - Device_Supports_USB_Data = YES
  - Device_Speed = 2
  - Device_Max_USB2_Speed = 2
  - Type_C_Can_Act_As_Host = NO
  - Host_Supports_USB_Data = 0XFF
  - Host_Speed = 0XFF
  - Type_C_Supports_Audio_Accessory = NO
  - Type_C_Supports_VCONN_Powered_Accessory = 0XFF
  - Type_C_Supports_Vconn_Powered_Accessory = 0XFF
  - Type_C_Is_Debug_Target_SRC = 0XFF
  - Type_C_Is_Debug_Target_SNK = YES
  - Type_C_Implements_Try_SRC = 0XFF
  - Type_C_Implements_Try_SNK = 0XFF
  - Host_Is_Embedded = 0XFF
- Successfully finished VIF Extraction.
- Update AnalyzerID in file VendorInformation.ginc to 16
- Update AnalyzerID in file VendorInformation.inc to 16
- Update BOARD_REV in file VendorInformation.ginc to 9
- Update BOARD_REV in file VendorInformation.inc to 9
- The test conditions are met and test is applicable to run.
- Test_Class::IsCableMatched(VConn Pass-Thru)
- PUT_CONNECTED = YES
- DETECTED_CABLE_TYPE = VConn Pass-Thru
- CABLE_DIRECTION = NORMAL
- IS_USB2_STARTED = 1
- Cable is matched.
- Successfully detected device role (0x42) according to the provided VIF.
- Test_Class::IsReadyToRun()::result = 1
- AddCondition:MaxConditionCounter = 1
- Test Preliminary procedures has started.
- Calibrating VBUS current on Voyager (0) #18033 ...
- Test Preliminary procedures has done.
- TD.4.3.3.C.1 fail
  - Power Delivery Link initialization on Voyager #18033 : Running Generation
  - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\InitPDLink.updg: Starting PD Generation
  - Waiting... [maximum 8000 ms]
  - Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18033 wait_time_msec=8000
  - Generation Complete... 216 ms
  - Stopping PD Generation
  - Update ConditionID in file Variables.inc to "TD.4.3.3.C.1"
  - Update ConditionNumber in file Variables.ginc to 1
  - Running AtStart_func: CheckVconnApplicability(this)
  - Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #0
  - Capture_Class::Run() on CVS_0
  - Board_Class::SetSyncGUID [{7A96ABA0-2434-43E4-91EF-52E2769656F4}]
  - Board_Class::SetAnalyzerParameters [1, 3]
  - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Sink Tests\TD.4.3.3_USB3_Host.rec: Starting Recording
  - RecordingOptions::ApplySettings()
  - RecordingOptions::ApplyTraceSettings()::[TD.4.3.3.C.1.usb]
  - RecordingOptions::ApplySettings()::SetTraceFileName ->C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20220522_191730\USB Type-C\TD.4.3.3\01_TD.4.3.3.C.1.usb
  - RecordingOptions::ApplyGeneralSettings()
  - RecordingOptions::ApplyCapturePowerMeasurement()
  - RecordingOptions::ApplyRecordingBufferSize()
  - RecordingOptions::ApplyExtTriggerInRecOption()
  - RecordingOptions::ApplyExerciserConnectedName()[Synopsys-A-NA][]
  - RecordingOptions::ApplyUSB3Settings()
  - RecordingOptions::ApplyCaptureRawFile()
  - RecordingOptions::ApplyTypeCSettings()
  - RecordingOptions::ApplyCaptureCC_Traffic()
  - RecordingOptions::ApplyTypeCRoleSides()
  - ApplyTypeCRoleSides()::RO_SETTING_TC_DEVICE_ROLE = 66
  - RecordingOptions::ApplyUncertainSettingsTypeC()
  - Board_Class::StartRecording()
  - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\GEN\USB Type C - USBIF\Sink Tests\TD.4.3.3.UPDg: Starting PD Generation
  - Waiting... [maximum 20000 ms]
  - Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18033 wait_time_msec=20000
  - Generation Complete... 4216 ms
  - Stopping PD Generation
  - Waiting for Trigger...
  - Analyzer Trigged... 5240 ms
  - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Sink Tests\TD.4.3.3_USB3_Host.rec: Stopping Recording at 5352 ms
  - Board_Class::StopRecordingAndWaitForTrace()
  - Board_Class::SetSyncGUID []
  - Trace is ready... 11200 ms
  - Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #1
  - TD.4.3.3.V.1 pass
    - Saving TD.4.3.3.V.1 in the file Variables.inc
    - Update VerificationID in file Variables.inc to "TD.4.3.3.V.1"
    - Relevant CVS found on item 0
    - Check_Class::Verify() on Trace from CVS_0
    - Check_Class::Verify()::ErrorCode from relevant CVS = 0:
    - Check_Class::Verify()::Check if any Bring-up has failed.
    - Check_Class::Verify()::Executing AlwaysApplicable
    - Update CVS_ID in file CVS_Parameters.inc to 16
    - Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
    - Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20220522_191730\USB Type-C\TD.4.3.3\Debug\1_c1v1
    - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Sink Tests\TD.4.3.3.vse: Running Verification Script
    - Running Verification script : TD.4.3.3.vse
    - Running Do_Nothing_Sub_with_One_param
    - Verification Result: PASSED
    - Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #2
  - TD.4.3.3.V.2 pass
    - Saving TD.4.3.3.V.2 in the file Variables.inc
    - Update VerificationID in file Variables.inc to "TD.4.3.3.V.2"
    - Relevant CVS found on item 0
    - Check_Class::Verify() on Trace from CVS_0
    - Check_Class::Verify()::ErrorCode from relevant CVS = 0:
    - Check_Class::Verify()::Check if any Bring-up has failed.
    - Check_Class::Verify()::Executing AlwaysApplicable
    - Update CVS_ID in file CVS_Parameters.inc to 16
    - Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
    - Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20220522_191730\USB Type-C\TD.4.3.3\Debug\1_c1v2
    - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Sink Tests\TD.4.3.3.vse: Running Verification Script
    - Running Verification script : TD.4.3.3.vse
    - Running Do_Nothing_Sub_with_One_param
    - Verification Result: PASSED
    - Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #3
  - TD.4.3.3.V.8 fail
    - Saving TD.4.3.3.V.8 in the file Variables.inc
    - Update VerificationID in file Variables.inc to "TD.4.3.3.V.8"
    - Relevant CVS found on item 0
    - Check_Class::Verify() on Trace from CVS_0
    - Check_Class::Verify()::ErrorCode from relevant CVS = 0:
    - Check_Class::Verify()::Check if any Bring-up has failed.
    - Check_Class::Verify()::Executing Check_USB3_Device_Applicability
    - Update CVS_ID in file CVS_Parameters.inc to 16
    - Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
    - Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20220522_191730\USB Type-C\TD.4.3.3\Debug\1_c1v3
    - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Sink Tests\TD.4.3.3.vse: Running Verification Script
    - Running Verification script : TD.4.3.3.vse
    - Running Do_Nothing_Sub_with_One_param
    - Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Sink Tests\TD.4.3.3.vse.Txt ...
    - Error(0x0000013C): UFP applied termination after 1.000 sec from Vbus ON.
    - Verification Result: FAILED
    - Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #4
  - TD.4.3.3.V.3 n/a
    - Saving TD.4.3.3.V.3 in the file Variables.inc
    - Update VerificationID in file Variables.inc to "TD.4.3.3.V.3"
    - Relevant CVS found on item 0
    - Check_Class::Verify() on Trace from CVS_0
    - Check_Class::Verify()::ErrorCode from relevant CVS = 0:
    - Check_Class::Verify()::Check if any Bring-up has failed.
    - Check_Class::Verify()::Executing Check_USB2_Device_Applicability
    - >> This is not applicable for a PUT that does not support USB2 as Device.
    - Verification Result: N/A
    - Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #5
  - TD.4.3.3.V.4 pass
    - Saving TD.4.3.3.V.4 in the file Variables.inc
    - Update VerificationID in file Variables.inc to "TD.4.3.3.V.4"
    - Relevant CVS found on item 0
    - Check_Class::Verify() on Trace from CVS_0
    - Check_Class::Verify()::ErrorCode from relevant CVS = 0:
    - Check_Class::Verify()::Check if any Bring-up has failed.
    - Check_Class::Verify()::Executing Check_PUT_R_Applicability
    - Update CVS_ID in file CVS_Parameters.inc to 16
    - Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
    - Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20220522_191730\USB Type-C\TD.4.3.3\Debug\1_c1v5
    - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Sink Tests\TD.4.3.3.vse: Running Verification Script
    - Running Verification script : TD.4.3.3.vse
    - Running Do_Nothing_Sub_with_One_param
    - Verification Result: PASSED
    - Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #6
  - TD.4.3.3.V.5 fail
    - Saving TD.4.3.3.V.5 in the file Variables.inc
    - Update VerificationID in file Variables.inc to "TD.4.3.3.V.5"
    - Relevant CVS found on item 0
    - Check_Class::Verify() on Trace from CVS_0
    - Check_Class::Verify()::ErrorCode from relevant CVS = 0:
    - Check_Class::Verify()::Check if any Bring-up has failed.
    - Check_Class::Verify()::Executing AlwaysApplicable
    - Update CVS_ID in file CVS_Parameters.inc to 16
    - Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
    - Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20220522_191730\USB Type-C\TD.4.3.3\Debug\1_c1v6
    - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Sink Tests\TD.4.3.3.vse: Running Verification Script
    - Running Verification script : TD.4.3.3.vse
    - Running Do_Nothing_Sub_with_One_param
    - Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Sink Tests\TD.4.3.3.vse.Txt ...
    - Error(0x0000013C): UFP applied termination after 1.000 sec from Vbus ON.
    - Verification Result: FAILED
    - Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #7
  - TD.4.3.3.V.6 fail
    - Saving TD.4.3.3.V.6 in the file Variables.inc
    - Update VerificationID in file Variables.inc to "TD.4.3.3.V.6"
    - Relevant CVS found on item 0
    - Check_Class::Verify() on Trace from CVS_0
    - Check_Class::Verify()::ErrorCode from relevant CVS = 0:
    - Check_Class::Verify()::Check if any Bring-up has failed.
    - Check_Class::Verify()::Executing AlwaysApplicable
    - Update CVS_ID in file CVS_Parameters.inc to 16
    - Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
    - Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20220522_191730\USB Type-C\TD.4.3.3\Debug\1_c1v7
    - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Sink Tests\TD.4.3.3.vse: Running Verification Script
    - Running Verification script : TD.4.3.3.vse
    - Running Do_Nothing_Sub_with_One_param
    - Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Sink Tests\TD.4.3.3.vse.Txt ...
    - Error(0x0000013C): UFP applied termination after 1.000 sec from Vbus ON.
    - Verification Result: FAILED
    - Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #8
  - TD.4.3.3.V.7 fail
    - Saving TD.4.3.3.V.7 in the file Variables.inc
    - Update VerificationID in file Variables.inc to "TD.4.3.3.V.7"
    - Relevant CVS found on item 0
    - Check_Class::Verify() on Trace from CVS_0
    - Check_Class::Verify()::ErrorCode from relevant CVS = 0:
    - Check_Class::Verify()::Check if any Bring-up has failed.
    - Check_Class::Verify()::Executing AlwaysApplicable
    - Update CVS_ID in file CVS_Parameters.inc to 16
    - Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
    - Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20220522_191730\USB Type-C\TD.4.3.3\Debug\1_c1v8
    - C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Sink Tests\TD.4.3.3.vse: Running Verification Script
    - Running Verification script : TD.4.3.3.vse
    - Running Do_Nothing_Sub_with_One_param
    - Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Sink Tests\TD.4.3.3.vse.Txt ...
    - Error(0x0000013C): UFP applied termination after 1.000 sec from Vbus ON.
    - Verification Result: FAILED
    - C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20220522_191730\USB Type-C\TD.4.3.3\\01_TD.4.3.3.C.1_FAIL.usb: Saving trace file
    - Trace saved...
    - Running ProcessResult:
- TD.4.3.3 : Finished
- Test Elapsed Time: 0 minute(s) and 31 seconds