// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright 2019 NXP
 */

/dts-v1/;
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/usb/pd.h>

#include "imx8mp-sr-som.dtsi"

/ {
	model = "SolidRun i.MX8MP HummingBoard Pulse";
	compatible = "fsl,imx8mp-sr-som", "fsl,imx8mp";

	leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpio_led>;

		/*status {
			label = "status";
			gpios = <&gpio4 22 0>;
			default-state = "on";
		};*/
	};

	power-m2-mpcie {
        	compatible = "reg-userspace-consumer";
        	regulator-name = "m2-mpcie-pwr-consumer";
		regulator-boot-on;
		regulator-supplies = "vcc";
        	vcc-supply = <&reg_m2_mpcie_pwr>;
        	comment = "m.2 and mpcie 3.3V connector switch";
    	};

	power-usb-port1 {
        	compatible = "reg-userspace-consumer";
        	regulator-name = "usb-port1-pwr-consumer";
		regulator-boot-on;
		regulator-supplies = "vcc";
        	vcc-supply = <&reg_usb1_host_vbus>;
        	comment = "USB Port1 vbus power switch";
    	};

	power-usb-port2 {
        	compatible = "reg-userspace-consumer";
        	regulator-name = "usb-port2-pwr-consumer";
		regulator-boot-on;
		regulator-supplies = "vcc";
        	vcc-supply = <&reg_usb1_vbus>;
        	comment = "USB Port2 vbus power switch";
    	};

	reg_m2_mpcie_pwr: regulator-m2-mpcie-pwr {
		compatible = "regulator-fixed";
		regulator-name = "m2-mpcie-pwr";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_m2_pwr>;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	reg_usb1_host_vbus: regulator-usb1-host-vbus {
		compatible = "regulator-fixed";
		regulator-name = "usb1_host_vbus";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usb1_host_vbus>;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	reg_usb1_vbus: regulator-usb1-vbus {
		compatible = "regulator-fixed";
		regulator-name = "usb1_vbus";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usb1_vbus>;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	reg_usdhc2_vmmc: regulator-usdhc2 {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
		regulator-name = "VSD_3V3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&gpio2 19 GPIO_ACTIVE_LOW>;
		regulator-always-on;
	};

	reg_vdd_1v8: regulator-vdd-1v8 {
		compatible = "regulator-fixed";
		regulator-name = "VDD_1V8";
                vdd-3v3-supply = <&buck4>;
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-always-on;
	};

	rfkill_m2_wdis {
		compatible = "rfkill-gpio";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_m2_rfkill>;
		rfkill-name = "m2_wdis";
		rfkill-type = <5>;
		reset-gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
		shutdown-gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
		status = "okay";
	};

	rfkill_m2_gps {
		compatible = "rfkill-gpio";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_m2_gps_rfkill>;
		rfkill-name = "m2_gps";
		rfkill-type = <6>;
		shutdown-gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
		status = "okay";
	};

	rfkill_mpcie_wdis {
		compatible = "rfkill-gpio";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_mpcie_rfkill>;
		rfkill-name = "mpcie_wdis";
		rfkill-type = <5>;
		reset-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
		shutdown-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
		status = "okay";
	};

	sound-hdmi {
		compatible = "fsl,imx-audio-cdnhdmi";
		model = "audio-hdmi";
		audio-cpu = <&aud2htx>;
		hdmi-out;
		constraint-rate = <44100>,
				<88200>,
				<176400>,
				<32000>,
				<48000>,
				<96000>,
				<192000>;
		status = "disabled";
	};

	sound-wm8904 {
		compatible = "simple-audio-card";
		simple-audio-card,name = "wm8904-audio";
		simple-audio-card,format = "i2s";
		simple-audio-card,frame-master = <&sound_wm8904_cpu>;
		simple-audio-card,bitclock-master = <&sound_wm8904_cpu>;
		simple-audio-card,widgets =
			"Headphone", "Headphone Jack",
			"Microphone", "Headset Microphone";
		simple-audio-card,routing =
			"Headphone Jack", "HPOUTL",
			"Headphone Jack", "HPOUTR",
			"Headset Microphone", "MICBIAS",
			"IN2R", "Headset Microphone";

		sound_wm8904_cpu: simple-audio-card,cpu {
			sound-dai = <&sai3>;
			dai-tdm-slot-num = <2>;
			dai-tdm-slot-width = <32>;
		};

		sound_wm8904_codec: simple-audio-card,codec {
			sound-dai = <&wm8904>;
		};
	};
	
	sn65dsi86_refclk: sn65dsi86-refclk {
		compatible = "fixed-clock";
		#clock-cells = <0>;

		clock-frequency = <27000000>;
	};

	backlight: backlight {
		compatible = "pwm-backlight";
//		pwms = <&dsi_2_edp_bridge 1000000>;
//		enable-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
	};	


	dsi_2_edp_en: dsi-2-edp-en {
		pinmux {
			pins = "gpio102";
			function = "gpio";
		};

		pinconf {
			pins = "gpio102";
			drive-strength = <2>;
			bias-disable;
		};
	};

	dsi_2_edp_irq: dsi-2-edp-irq {
		pinmux {
			pins = "gpio10";
			function = "gpio";
		};

		pinconf {
			pins = "gpio10";
			drive-strength = <2>;
			bias-pull-down;
		};
	};
	
	/*panel: panel {
		compatible = "simple-panel", "qcom,sc7180-dp";
		//backlight = <&backlight>;
		panel-width-mm = <2560>;
		panel-height-mm = <1440>;
		status = "okay";

		no-hpd;		

		port {
			panel_in_edp: endpoint {
				remote-endpoint = <&sn65dsi86_out>;
			};
		};
	};*/

};

&aud2htx {
	status = "okay";
};

&basler_1 {
        status = "okay";
};

&easrc {
	fsl,asrc-rate  = <48000>;
	status = "okay";
};

&ecspi2 {
	#address-cells = <1>;
	#size-cells = <0>;
	fsl,spi-num-chipselects = <1>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
	status = "okay";

	spidev1: spi@0 {
		reg = <0>;
		compatible = "linux,spidev";
		spi-max-frequency = <10000000>;
	};
};

/*eth0*/
&eqos {
	status = "okay";
};

&flexspi {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexspi0>;
	status = "okay";
};


&i2c2 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	status = "okay";

	/*sound codec*/
	wm8904: codec@1a {
		#sound-dai-cells = <0>;
		compatible = "cirrus,wm8904", "wlf,wm8904";
		reg = <0x1a>;
		DBVDD-supply = <&buck4>;
		MICVDD-supply = <&buck4>;
		DCVDD-supply = <&reg_vdd_1v8>;
		AVDD-supply = <&reg_vdd_1v8>;
		CPVDD-supply = <&reg_vdd_1v8>;
		clocks = <&clk IMX8MP_CLK_SAI3>;
		clock-names = "mclk";
		status = "okay";
	};
};

&i2c3 {
        #address-cells = <1>;
        #size-cells = <0>;
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c3>;
	status = "okay";

	basler_0: basler_camera_vvcam@36 {
		compatible = "basler,basler-camera-vvcam", "basler-camera-vvcam";
		reg = <0x36>;
		csi_id = <0x00>;
		status = "okay";

		port {
			basler_ep_0: endpoint {
				data-lanes = <1 2 3 4>;
				clock-lanes = <0>;
				link-frequencies = /bits/ 64 <750000000>;

				max-lane-frequency = /bits/ 64 <750000000>;
				max-pixel-frequency = /bits/ 64 <266000000>;
				max-data-rate = /bits/ 64 <0>;

				remote-endpoint = <&mipi_csi0_ep>;
			};
		};
	};

	adv_bridge: adv7535@3d {
		compatible = "adi,adv7533";
		reg = <0x3d>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_mipi_dsi_en>;
		adi,addr-cec = <0x3c>;
		adi,addr-edid = <0x3b>;
		adi,dsi-lanes = <4>;
		gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
		status = "disabled";


		/*port {
			adv7535_from_dsim: endpoint {
				remote-endpoint = <&dsim_to_adv7535>;
			};
		};*/
	};

	eeprom_carrier: eeprom@57 {
		compatible = "st,24c02", "atmel,24c02";
		reg = <0x57>;
		pagesize = <8>;
	};

	rtc: rtc@69 {
		compatible = "abracon,ab1805";
		reg = <0x69>;
		abracon,tc-diode = "schottky";
		abracon,tc-resistor = <3>;
	};

	dsi_2_edp_bridge: sn65dsi86@2d {
		compatible = "ti,sn65dsi86";
		reg = <0x2d>;

		ti,dsi-lanes = <4>;
		max,dsi-channel = <1>;
		ti,dp-lanes = <4>;
		pinctrl-names = "default";
		
//		pinctrl-0 = <&dsi_2_edp_en>, <&dsi_2_edp_irq>;
		
//		gpio-controller;
		#gpio-cells = <2>;
		
		//interrupt-parent = <&tlmm>;
//		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;

		//enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;

		/*vpll-supply = <&src_pp1800_s4a>;
		vccio-supply = <&src_pp1800_s4a>;
		vcca-supply = <&src_pp1200_l2a>;
		vcc-supply = <&src_pp1200_l2a>;
		*/

		//clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
		clocks = <&sn65dsi86_refclk>;
		clock-names = "refclk";
		no-hpd;

		panel@0 {
			compatible = ""panel-simple";  // edp
			reg = <0>;
			pinctrl-0 = <&pinctrl_mipi_dsi_en>;
			// reset-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
			enable-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
			panel-width-mm = <256>;
			panel-height-mm = <144>;
			// backlight = <&backlight>;
			port {
				panel_in_edp: endpoint {
					remote-endpoint = <&sn65dsi86_out>;
				};
			};
		};

		ports {
			port@1 {
				reg = <1>;
				sn65dsi86_in: endpoint {
					remote-endpoint = <&dsi0_out>;
				};
			};

			port@2 {
				reg = <2>;
				sn65dsi86_out: endpoint {
					remote-endpoint = <&panel_in_edp>;
				};
			};
		};
	};
};
			
&irqsteer_hdmi {
	status = "okay";
};

&hdmi {
	status = "okay";
};

&hdmi_blk_ctrl {
	status = "okay";
};

&hdmi_pavi {
	status = "okay";
};

&hdmiphy {
	status = "okay";
};

&isp_0 {
	status = "okay";
};

&isp_1 {
	status = "okay";
};

/*micro HDMI*/
&lcdif1 {
	status = "okay";
};

&lcdif2 {
	status = "disabled";
};

/*HDMI*/
&lcdif3 {
	status = "disabled";
};

&micfil {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pdm>;
	assigned-clocks = <&clk IMX8MP_CLK_PDM>;
	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
	assigned-clock-rates = <196608000>;
	status = "disabled";
};

&mipi_csi_0 {
	#address-cells = <1>;
	#size-cells = <0>;
	clock-frequency = <266000000>;
	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>;
	assigned-clock-rates = <266000000>;
	status = "okay";

	port@0 {
		reg = <0>;
		mipi_csi0_ep: endpoint {
			remote-endpoint = <&basler_ep_0>;
			data-lanes = <4>;
			csis-hs-settle = <16>;
		};
	};

};

&mipi_csi_1 {
	status = "okay";
};

&mipi_dsi {
	status = "okay";
        //compatible = "fsl,imx8mp-mipi-dsim";

	port@1 {
		dsi0_out: endpoint {
			remote-endpoint = <&sn65dsi86_in>;
			attach-bridge;
		};
	};
		
	/*port@1 {
		dsim_to_adv7535: endpoint {
			remote-endpoint = <&adv7535_from_dsim>;
			attach-bridge;
		};
	};*/
};

&pcie{
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pcie>;
	reset-gpio = <&gpio4 28 GPIO_ACTIVE_LOW>;
	ext_osc = <0>;
	clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
		 <&clk IMX8MP_CLK_PCIE_AUX>,
		 <&clk IMX8MP_CLK_HSIO_AXI>,
		 <&clk IMX8MP_CLK_PCIE_ROOT>;
	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
	assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
			  <&clk IMX8MP_CLK_PCIE_AUX>;
	assigned-clock-rates = <500000000>, <10000000>;
	assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>,
				 <&clk IMX8MP_SYS_PLL2_50M>;
	status = "okay";
};

&pcie_phy{
	ext_osc = <0>;
	status = "okay";
};

&pwm4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm4>;
	status = "okay";
};

&sai3 {
	#sound-dai-cells = <0>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_sai3>;
        assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
        assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
        assigned-clock-rates = <12288000>;
        clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIO_BLK_CTRL_SAI3_IPG>, <&clk IMX8MP_CLK_DUMMY>,
                 <&audio_blk_ctrl IMX8MP_CLK_AUDIO_BLK_CTRL_SAI3_MCLK1>, <&clk IMX8MP_CLK_DUMMY>,
                 <&clk IMX8MP_CLK_DUMMY>;
        clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
        fsl,sai-mclk-direction-output;
	status = "okay";
};

&sdma2 {
        status = "okay";
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart3>;
	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
	fsl,uart-has-rtscts;
	status = "okay";
};

&usb3_phy0 {
	fsl,phy-tx-preemp-amp-tune = <2>;
	status = "okay";
};

&usb3_0 {
	status = "okay";
};

&usb_dwc3_0 {
	dr_mode = "host";
	status = "okay";
};

&usb3_phy1 {
	fsl,phy-tx-preemp-amp-tune = <2>;
	status = "okay";
};

&usb3_1 {
	status = "okay";
};

&usb_dwc3_1 {
	dr_mode = "host";
	snps,parkmode-disable-ss-quirk;
	status = "okay";
};

&usdhc2 {
	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
	assigned-clock-rates = <400000000>;
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
	vmmc-supply = <&reg_usdhc2_vmmc>;
	voltage-ranges = <1800 1800 3300 3300>;
	bus-width = <4>;
	status = "okay";
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hog>;


	/*pinctrl_edp_mux: kzmuxedpgrp {
		fsl,pins = <
			MX8MQ_IOMUXC_UART4_RXD_GPIO5_IO28		0x01
		>;
	};*/
	
	pinctrl_ecspi2: ecspi2grp {
		fsl,pins = <
			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x82
			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x82
			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x82
		>;
	};

	pinctrl_ecspi2_cs: ecspi2cs {
		fsl,pins = <
			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x40000
		>;
	};

	pinctrl_gpio_led: gpioledgrp {
		fsl,pins = <
			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x19
			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21		0x19
			MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23		0x19
			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24		0x19
			MX8MP_IOMUXC_UART4_RXD__GPIO5_IO28		0x19
		>;
	};

	pinctrl_hog: hoggrp {
		fsl,pins = <
			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3
			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3
			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x40000019
			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x40000019
		>;
	};

	pinctrl_i2c2: i2c2grp {
		fsl,pins = <
			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL			0x400001c3
			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA			0x400001c3
		>;
	};

	pinctrl_i2c3: i2c3grp {
		fsl,pins = <
			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL			0x400001c3
			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA			0x400001c3
		>;
	};

	pinctrl_flexspi0: flexspi0grp {
		fsl,pins = <
			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK		0x1c2
			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B	0x82
			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00	0x82
			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01	0x82
			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03	0x82
		>;
	};

	pinctrl_m2_rfkill: m2_rfkill_grp {
		fsl,pins = <
			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x19
			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x19
		>;
	};

	pinctrl_m2_gps_rfkill: m2_gps_rfkill_grp {
		fsl,pins = <
			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x19
		>;
	};

	pinctrl_m2_pwr: mp2_pwr_grp {
		fsl,pins = <
			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x19
		>;
	};

	pinctrl_mpcie_rfkill: mpcie_rfkill_grp {
		fsl,pins = <
			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x19
			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x19
		>;
	};

	pinctrl_mipi_dsi_en: mipi_dsi_en {
		fsl,pins = <
			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x16
		>;
	};

        pinctrl_pcie: pciegrp {
                fsl,pins = <
                        MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x41/*pcie reset*/
                >;
        };

	pinctrl_pdm: pdmgrp {
		fsl,pins = <
			MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_PDM_CLK			0xd6
			MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_PDM_BIT_STREAM00	0xd6
			MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_PDM_BIT_STREAM01	0xd6
			MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_PDM_BIT_STREAM02	0xd6
			MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_PDM_BIT_STREAM03	0xd6
		>;
	};

	pinctrl_pwm4: pwm4grp {
		fsl,pins = <
			MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT		0x116
		>;
	};

	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
		fsl,pins = <
			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x40
		>;
	};

	pinctrl_sai3: sai3grp {
		fsl,pins = <
			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
		>;
	};

	pinctrl_uart3: uart3grp {
		fsl,pins = <
			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x140
			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x140
			MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS		0x140
			MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS		0x140
		>;
	};

	pinctrl_usb1_host_vbus: usb1hostgrp {
		fsl,pins = <
			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x19
		>;
	};

	pinctrl_usb1_vbus: usb1grp {
		fsl,pins = <
			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x19
		>;
	};

	pinctrl_usdhc2: usdhc2grp {
		fsl,pins = <
			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
		>;
	};

	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
		fsl,pins = <
			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 	0xc1
		>;
	};

	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
		fsl,pins = <
			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 	0xc1
		>;
	};

	pinctrl_usdhc2_gpio: usdhc2grp-gpio {
		fsl,pins = <
			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 		0x1c4
		>;
	};
};