root@arm:/home/Precompiled/servers# ./zigbeeHAgw 
Platform type selected automatically as bbb.
To override this selection, please stop this script, and then run it again,
specifying the desired platform type at the command line:
  ./zigbeeHAgw [help | bbb | x86 ]

running ./zigbeeHAgw on an ARM
done processing arguments, board type bbb, target arm
NPI                 is 'NPI_lnx_arm_server'
Zstack linux server is 'ZLSZNP_arm'
gateway server      is 'GATEWAY_SRVR_arm'
network manager     is 'NWKMGR_SRVR_arm'
OTA server        is 'OTA_SRVR_arm'
Starting the ZigBee gateway subsystem
making sure there are no lingering servers...
there are 0 NPI servers
there are 0 ZLS servers
there are 0 GATEWAY servers
there are 0 NWKMGR servers
there are 0 OTA servers
(total 0)
done
===================================================
starting NPI, cmd ' ./NPI_lnx_arm_server NPI_Gateway.cfg -v 0xFFFFFFFF debugAll ' on Mon 24 May 2021 02:39:26 PM UTC
[14:39:26.349,064] [NPISRVR/MAIN] UNMSKBL: 
[14:39:26.349,235] [NPISRVR/MAIN] UNMSKBL:  ************************************************
[14:39:26.349,248] [NPISRVR/MAIN] UNMSKBL:  *  NPI Server v1.0.2d                          *
[14:39:26.349,258] [NPISRVR/MAIN] UNMSKBL:  ************************************************
[14:39:26.349,268] [NPISRVR/MAIN] UNMSKBL: 
gpioCfg                                 0x42b460
gpioCfg[0]                              0x16fb8630
gpioCfg[0].gpio                         0x16fb8650
gpioCfg[0].levelshifter                 0x16fb87d1
gpioCfg[1]                              0x16fb8638
gpioCfg[1].gpio                         0x16fb8960
gpioCfg[1].levelshifter                 0x16fb8ae1
gpioCfg[2]                              0x16fb8640
gpioCfg[2].gpio                         0x16fb8c70
gpioCfg[2].levelshifter                 0x16fb8df1
------------------------------------------------------
Serial Config Parsing:
-       Section:        TRACE
-       Key:            TRACE_LAYER_NAME_CHAR_COUNT
Found section [PORT]es
Found section [DEVICE]
Found section [GPIO_SRDY.GPIO]
Found section [GPIO_SRDY.LEVEL_SHIFTER]
Found section [GPIO_MRDY.GPIO]
Found section [GPIO_MRDY.LEVEL_SHIFTER]
Found section [GPIO_RESET.GPIO]
Found section [GPIO_RESET.LEVEL_SHIFTER]
Found section [UART]es
Found section [SPI]tes
Startup phase 1 completed successfully, server started (NPI_PID=6471) on Mon 24 May 2021 02:39:26 PM UTC
Found section [LOG]
------------------------------------------------------
Serial Config Parsing:
-       Section:        TRACE
-       Key:            TRACE_ARROW_CHAR_COUNT
Found section [PORT]es
Found section [DEVICE]
Found section [GPIO_SRDY.GPIO]
Found section [GPIO_SRDY.LEVEL_SHIFTER]
Found section [GPIO_MRDY.GPIO]
Found section [GPIO_MRDY.LEVEL_SHIFTER]
Found section [GPIO_RESET.GPIO]
Found section [GPIO_RESET.LEVEL_SHIFTER]
Found section [UART]es
Found section [SPI]tes
Found section [LOG]tes
------------------------------------------------------
Serial Config Parsing:
-       Section:        DEVICE
-       Key:            deviceKey
Found section [PORT]es
Found section [DEVICE]
Found wanted section!
Line to process deviceKey=0 ; UART (strlen=18)
Found key       'deviceKey' in  'deviceKey=0 ; UART'
Found value '0 '
Found value2 '0 '
[14:39:26.350,555] [NPISRVR/MAIN] INFO   : deviceKey = 0  (0 )
------------------------------------------------------
Serial Config Parsing:
-       Section:        DEVICE
-       Key:            devPath
Found section [PORT]es
Found section [DEVICE]
Found wanted section!
Line to process deviceKey=0 ; UART (strlen=18)
Line to process #deviceKey=1 ; SPI (strlen=18)
Line to process #deviceKey=2 ; I2C (strlen=18)
Line to process  (strlen=0)
Found line < 128===================================================
Line to process #devPath="/dev/ttyUSB2"; (strlen=24)
Line to process #devPath="/dev/ttyO4" ; UART/CDC (strlen=32)
Line to process devPath="/dev/ttymxc2" ; USART3 (strlen=31)
Found key       'devPath' in    'devPath="/dev/ttymxc2" ; USART3'
Found value '/dev/ttymxc2'
Found value2 '/dev/ttymxc2'
[14:39:26.350,819] [NPISRVR/MAIN] INFO   : 'devPath' specified in the config file is overriden by the soc_device_path command line argument
[14:39:26.350,831] [NPISRVR/MAIN] INFO   : devPath = '/dev/ttymxc2'
------------------------------------------------------
Serial Config Parsing:
-       Section:        LOG
-       Key:            log
Found section [PORT]es
Found section [DEVICE]
Found section [GPIO_SRDY.GPIO]
Found section [GPIO_SRDY.LEVEL_SHIFTER]
Found section [GPIO_MRDY.GPIO]
Found section [GPIO_MRDY.LEVEL_SHIFTER]
Found section [GPIO_RESET.GPIO]
Found section [GPIO_RESET.LEVEL_SHIFTER]
Found section [UART]es
Found section [SPI]tes
Found section [LOG]tes
Found wanted section!
Line to process log="./NpiLnxLog.txt" ; file to log all event/error (strlen=51)
Found key       'log' in        'log="./NpiLnxLog.txt" ; file to log all event/error'
Found value './NpiLnxLog.txt'
Found value2 './NpiLnxLog.txt'
[14:39:26.351,205] [NPISRVR/MAIN] INFO   : logPath = './NpiLnxLog.txt'
------------------------------------------------------
Serial Config Parsing:
-       Section:        UART
-       Key:            speed
Found section [PORT]es
Found section [DEVICE]
Found section [GPIO_SRDY.GPIO]
Found section [GPIO_SRDY.LEVEL_SHIFTER]
Found section [GPIO_MRDY.GPIO]
Found section [GPIO_MRDY.LEVEL_SHIFTER]
Found section [GPIO_RESET.GPIO]
Found section [GPIO_RESET.LEVEL_SHIFTER]
Found section [UART]es
Found wanted section!
Line to process speed=115200 ; speed (strlen=20)
Found key       'speed' in      'speed=115200 ; speed'
Found value '115200 '
Found value2 '115200 '
[UART] Opening device /dev/ttymxc2
[UART] Install IO signal handler 
[UART] Baud rate set to 115200 (0x001002)
[UART] c_cflag set to 0x0018B2
------------------------------------------------------
Serial Config Parsing:
-       Section:        UART
-       Key:            flowcontrol
Found line < 12starting ZLSZNP, cmd ' ./ZLSZNP_arm 127.0.0.1:2533 config.ini -v 0xFFFFFFFF ' on Mon 24 May 2021 02:39:27 PM UTC
[UART] Wait for mutex in rx entry:
Found section [PORT]es
Found section [DEVICE]
Found section [GPIO_SRDY.GPIO]
Found section [GPIO_SRDY.LEVEL_SHIFTER]
Found section [GPIO_MRDY.GPIO]
Found section [GPIO_MRDY.LEVEL_SHIFTER]
Found section [GPIO_RESET.GPIO]
Found section [GPIO_RESET.LEVEL_SHIFTER]
Found section [UART]es
Found wanted section!
Line to process speed=115200 ; speed (strlen=20)
Line to process flowcontrol=0 ; 1=enabled 0=disable (strlen=35)
Found key       'flowcontrol' in        'flowcontrol=0 ; 1=enabled 0=disable'
Found value '0 '
Found value2 '0 '
------------------------------------------------------
Serial Config Parsing:
-       Section:        PORT
-       Key:            port
Found section [PORT]es
Found wanted section!
Line to process port=2533 (strlen=9)
Found key       'port' in       'port=2533'
Found value '2533'
Found value2 '2533'
... freeing memory (ret 0)
[14:39:26.352,688] [NPISRVR/MAIN] INFO   : Port: 2533
[14:39:26.353,686] [NPISRVR/MAIN] INFO   : Following IP addresses are available:
[14:39:26.353,897] [NPISRVR/MAIN] INFO   :  IPv4: interface: lo  IP Address 127.0.0.1
[14:39:26.353,910] [NPISRVR/MAIN] INFO   :  IPv6: interface: lo  IP Address ::1
[14:39:26.353,922] [NPISRVR/MAIN] INFO   : The socket will listen on the following IP addresses:
[14:39:26.353,934] [NPISRVR/MAIN] INFO   :   IPv4: 0.0.0.0
[14:39:26.353,943] [NPISRVR/MAIN] INFO   :   IPv6: ::
[14:39:26.353,953] [NPISRVR/MAIN] INFO   : 0.0.0.0 means it will listen to all available IP address
[14:39:26.354,024] [NPISRVR/MAIN] INFO   : waiting for first connection on #3...
[14:39:28.023,071] [Z_STACK/MAIN] MISC1  : Port: 2533

[14:39:28.023,661] [NPISRVR/MAIN] INFO   : Connected to #5.(127.0.0.1 / ::)
Receive message...
[14:39:28.024,227] [NPISRVR/MAIN] PKT_HEX: New incoming connection from client Z_STACK (connection # 5)
[<-- 000:00:00.024248 (+1621867168. 24248)] 08 bytes, subSys 0x5F, cmdId 0x00, pData:    0x02 0x5A 0x5F 0x53 0x54 0x41 0x43 0x4B
!Done
Receive message...
[<-- 000:00:00.024311 (+0.    63)] 02 bytes, subSys 0x25, cmdId 0x3E, pData:    0xFF 0xFF
NPI SREQ:  (len 5) 0x02 0x25 0x3E 0xFF 0xFF
[<-- 000:00:00.024327 (+0.    16)] [UART] write 7 bytes to 4
[14:39:28.024,347] [NPISRVR/MAIN] PKT_HEX: [SOCZIGB<<NPISRVR                                    ] [send] 02:25:3E:FF:FF
[14:39:28.023,259] [Z_STACK/MAIN] MISC1  : IP addresses for 127.0.0.1:

[14:39:28.023,279] [Z_STACK/MAIN] MISC1  :   IPv4: 127.0.0.1
[14:39:28.023,291] [Z_STACK/MAIN] MISC1  : Trying to connect...
[14:39:28.023,602] [Z_STACK/MAIN] MISC1  : Connected.
[14:39:28.023,827] [Z_STACK/MAIN] UNMSKBL: 
[14:39:28.023,845] [Z_STACK/MAIN] UNMSKBL:  ************************************************
[14:39:28.023,856] [Z_STACK/MAIN] UNMSKBL:  *  ZStack Server for ZNP v1.0.2d               *
[14:39:28.023,867] [Z_STACK/MAIN] UNMSKBL:  ************************************************
[14:39:28.023,877] [Z_STACK/MAIN] UNMSKBL: 
[14:39:28.023,893] [Z_STACK/HNDL] INFO   : [MUTEX] Wait for AREQ semaphore
[14:39:28.023,928] [Z_STACK/MAIN] INFO   : trying to send 8 bytes, subSys 0x1F, cmdId 0x00
[14:39:28.023,971] [Z_STACK/MAIN] PKT_HEX: [         NPISRVR<<Z_STACK                           ] [AREQ] 08:5F:00:02:5A:5F:53:54:41:43:4B
[14:39:28.024,007] [Z_STACK/MAIN] PKTTYPE: [         NPISRVR<<Z_STACK                           ] [AREQ] 08:5F:00:02:5A:5F:53:54:41:43:4B
[14:39:28.024,183] [Z_STACK/MAIN] INFO   : znp_misc sendNPIExpectDefaultStatusZNP: subSys:5, cmdID:3e, len::2
[14:39:28.024,201] [Z_STACK/MAIN] INFO   : preparing to send 2 bytes, subSys 0x05, cmdId 0x3E, pData:
[14:39:28.024,213] [Z_STACK/MAIN] INFO   : [MUTEX] Lock SRSP Transaction Mutex
[14:39:28.024,236] [Z_STACK/MAIN] PKT_HEX: [         NPISRVR<<Z_STACK                           ] [SREQ] 02:25:3E:FF:FF
[14:39:28.024,258] [Z_STACK/MAIN] PKTTYPE: [         NPISRVR<<Z_STACK                           ] [SREQ] 02:25:3E:FF:FF
[14:39:28.024,312] [Z_STACK/MAIN] INFO   : Waiting for synchronous response...
[14:39:28.024,325] [Z_STACK/MAIN] INFO   : [MUTEX] Lock SRSP Mutex
[14:39:28.024,336] [Z_STACK/MAIN] INFO   : [MUTEX] Wait for SRSP Cond signal...
[14:39:30.024,417] [Z_STACK/MAIN] INFO   : [MUTEX] SRSP Cond Wait timed out!
[14:39:30.024,476] [Z_STACK/MAIN] ERROR  : SRSP Cond Wait timed out!
[14:39:30.024,489] [Z_STACK/MAIN] INFO   : [MUTEX] Unlock SRSP Mutex
[14:39:30.024,505] [Z_STACK/MAIN] ERROR  : apicSendSynchData() failed getting response
[14:39:30.024,517] [Z_STACK/MAIN] INFO   : zstackpb config: defaultChannelList:2000, configPANID:ffff, deviceType:0
[14:39:30.024,530] [Z_STACK/MAIN] INFO   : znp_misc sendNPIExpectDefaultStatusZNP: subSys:f, cmdID:9, len::1
[14:39:30.024,545] [Z_STACK/MAIN] INFO   : preparing to send 1 bytes, subSys 0x0F, cmdId 0x09, pData:
[14:39:30.024,557] [Z_STACK/MAIN] INFO   : [MUTEX] Lock SRSP Transaction Mutex
[14:39:30.024,585] [Z_STACK/MAIN] PKT_HEX: [         NPISRVR<<Z_STACK                           ] [SREQ] 01:2F:09:00
[14:39:30.024,611] [Z_STACK/MAIN] PKTTYPE: [         NPISRVR<<Z_STACK                           ] [SREQ] 01:2F:09:00
[14:39:30.024,755] [Z_STACK/MAIN] INFO   : Waiting for synchronous response...
[14:39:30.024,774] [Z_STACK/MAIN] INFO   : [MUTEX] Lock SRSP Mutex
[14:39:30.024,785] [Z_STACK/MAIN] INFO   : [MUTEX] Wait for SRSP Cond signal...
[14:39:32.024,860] [Z_STACK/MAIN] INFO   : [MUTEX] SRSP Cond Wait timed out!
[14:39:32.024,923] [Z_STACK/MAIN] ERROR  : SRSP Cond Wait timed out!
[14:39:32.024,937] [Z_STACK/MAIN] INFO   : [MUTEX] Unlock SRSP Mutex
[14:39:32.024,952] [Z_STACK/MAIN] ERROR  : apicSendSynchData() failed getting response
[14:39:32.024,966] [Z_STACK/MAIN] INFO   : znp_misc sendNPIExpectDefaultStatusZNP: subSys:f, cmdID:6, len::1
[14:39:32.024,980] [Z_STACK/MAIN] INFO   : preparing to send 1 bytes, subSys 0x0F, cmdId 0x06, pData:
[14:39:32.024,992] [Z_STACK/MAIN] INFO   : [MUTEX] Lock SRSP Transaction Mutex
[14:39:32.025,021] [Z_STACK/MAIN] PKT_HEX: [         NPISRVR<<Z_STACK                           ] [SREQ] 01:2F:06:00
[14:39:32.025,045] [Z_STACK/MAIN] PKTTYPE: [         NPISRVR<<Z_STACK                           ] [SREQ] 01:2F:06:00
[14:39:32.025,162] [Z_STACK/MAIN] INFO   : Waiting for synchronous response...
[14:39:32.025,181] [Z_STACK/MAIN] INFO   : [MUTEX] Lock SRSP Mutex
[14:39:32.025,193] [Z_STACK/MAIN] INFO   : [MUTEX] Wait for SRSP Cond signal...
[<-- 000:00:00.024398 (+0.    71)] [UART] result: 7
[<-- 000:00:00.024404 (+0.     6)] [UART] (synch data) Conditional wait 6 s
[UART] Send synch data timed out
[ERR] SRSP: npi_ipc_errno 0x02040100
!Done
Synchronous Request Timeout...
Receive message...
[<-- 000:00:06.024720 (+6.   316)] 01 bytes, subSys 0x2F, cmdId 0x09, pData:    0x00
NPI SREQ:  (len 4) 0x01 0x2F 0x09 0x00
[<-- 000:00:06.024737 (+0.    17)] [UART] write 6 bytes to 4
[14:39:34.024,760] [NPISRVR/MAIN] PKT_HEX: [SOCZIGB<<NPISRVR                                    ] [send] 01:2F:09:00
[14:39:34.025,256] [Z_STACK/MAIN] INFO   : [MUTEX] SRSP Cond Wait timed out!
[14:39:34.025,290] [Z_STACK/MAIN] ERROR  : SRSP Cond Wait timed out!
[14:39:34.025,303] [Z_STACK/MAIN] INFO   : [MUTEX] Unlock SRSP Mutex
[14:39:34.025,316] [Z_STACK/MAIN] ERROR  : apicSendSynchData() failed getting response
[14:39:34.025,327] [Z_STACK/MAIN] INFO   : znp_misc sendNPIExpectDefaultStatusZNP: subSys:f, cmdID:2, len::1
[14:39:34.025,341] [Z_STACK/MAIN] INFO   : preparing to send 1 bytes, subSys 0x0F, cmdId 0x02, pData:
[14:39:34.025,353] [Z_STACK/MAIN] INFO   : [MUTEX] Lock SRSP Transaction Mutex
[14:39:34.025,379] [Z_STACK/MAIN] PKT_HEX: [         NPISRVR<<Z_STACK                           ] [SREQ] 01:2F:02:08
[14:39:34.025,403] [Z_STACK/MAIN] PKTTYPE: [         NPISRVR<<Z_STACK                           ] [SREQ] 01:2F:02:08
[14:39:34.025,540] [Z_STACK/MAIN] INFO   : Waiting for synchronous response...
[14:39:34.025,558] [Z_STACK/MAIN] INFO   : [MUTEX] Lock SRSP Mutex
[14:39:34.025,570] [Z_STACK/MAIN] INFO   : [MUTEX] Wait for SRSP Cond signal...
[14:39:36.025,646] [Z_STACK/MAIN] INFO   : [MUTEX] SRSP Cond Wait timed out!
[14:39:36.025,715] [Z_STACK/MAIN] ERROR  : SRSP Cond Wait timed out!
[14:39:36.025,728] [Z_STACK/MAIN] INFO   : [MUTEX] Unlock SRSP Mutex
[14:39:36.025,744] [Z_STACK/MAIN] ERROR  : apicSendSynchData() failed getting response
[14:39:36.025,760] [Z_STACK/MAIN] INFO   : znp_misc sendNPIExpectDefaultStatusZNP: subSys:f, cmdID:8, len::5
[14:39:36.025,775] [Z_STACK/MAIN] INFO   : preparing to send 5 bytes, subSys 0x0F, cmdId 0x08, pData:
[14:39:36.025,787] [Z_STACK/MAIN] INFO   : [MUTEX] Lock SRSP Transaction Mutex
[14:39:36.025,820] [Z_STACK/MAIN] PKT_HEX: [         NPISRVR<<Z_STACK                           ] [SREQ] 05:2F:08:00:00:00:00:00
[14:39:36.025,849] [Z_STACK/MAIN] PKTTYPE: [         NPISRVR<<Z_STACK                           ] [SREQ] 05:2F:08:00:00:00:00:00
[14:39:36.025,986] [Z_STACK/MAIN] INFO   : Waiting for synchronous response...
[14:39:36.026,006] [Z_STACK/MAIN] INFO   : [MUTEX] Lock SRSP Mutex
[14:39:36.026,018] [Z_STACK/MAIN] INFO   : [MUTEX] Wait for SRSP Cond signal...
[14:39:38.026,089] [Z_STACK/MAIN] INFO   : [MUTEX] SRSP Cond Wait timed out!
[14:39:38.026,150] [Z_STACK/MAIN] ERROR  : SRSP Cond Wait timed out!
[14:39:38.026,163] [Z_STACK/MAIN] INFO   : [MUTEX] Unlock SRSP Mutex
[14:39:38.026,178] [Z_STACK/MAIN] ERROR  : apicSendSynchData() failed getting response
[14:39:38.026,191] [Z_STACK/MAIN] INFO   : znp_misc sendNPIExpectDefaultStatusZNP: subSys:f, cmdID:8, len::5
[14:39:38.026,207] [Z_STACK/MAIN] INFO   : preparing to send 5 bytes, subSys 0x0F, cmdId 0x08, pData:
[14:39:38.026,218] [Z_STACK/MAIN] INFO   : [MUTEX] Lock SRSP Transaction Mutex
[14:39:38.026,250] [Z_STACK/MAIN] PKT_HEX: [         NPISRVR<<Z_STACK                           ] [SREQ] 05:2F:08:01:00:20:00:00
[14:39:38.026,278] [Z_STACK/MAIN] PKTTYPE: [         NPISRVR<<Z_STACK                           ] [SREQ] 05:2F:08:01:00:20:00:00
[14:39:38.026,412] [Z_STACK/MAIN] INFO   : Waiting for synchronous response...
[14:39:38.026,432] [Z_STACK/MAIN] INFO   : [MUTEX] Lock SRSP Mutex
[14:39:38.026,443] [Z_STACK/MAIN] INFO   : [MUTEX] Wait for SRSP Cond signal...
[<-- 000:00:06.024837 (+0.   100)] [UART] result: 6
[<-- 000:00:06.024846 (+0.     9)] [UART] (synch data) Conditional wait 6 s
[UART] Send synch data timed out
[ERR] SRSP: npi_ipc_errno 0x02040100
!Done
Synchronous Request Timeout...
Receive message...
[<-- 000:00:12.025161 (+6.   315)] 01 bytes, subSys 0x2F, cmdId 0x06, pData:    0x00
NPI SREQ:  (len 4) 0x01 0x2F 0x06 0x00
[<-- 000:00:12.025176 (+0.    15)] [UART] write 6 bytes to 4
[14:39:40.025,198] [NPISRVR/MAIN] PKT_HEX: [SOCZIGB<<NPISRVR                                    ] [send] 01:2F:06:00
[14:39:40.026,504] [Z_STACK/MAIN] INFO   : [MUTEX] SRSP Cond Wait timed out!
[14:39:40.026,538] [Z_STACK/MAIN] ERROR  : SRSP Cond Wait timed out!
[14:39:40.026,551] [Z_STACK/MAIN] INFO   : [MUTEX] Unlock SRSP Mutex
[14:39:40.026,563] [Z_STACK/MAIN] ERROR  : apicSendSynchData() failed getting response
[14:39:40.026,577] [Z_STACK/MAIN] INFO   : znp_misc sendNPIExpectDefaultStatusZNP: subSys:1, cmdID:9, len::6
[14:39:40.026,592] [Z_STACK/MAIN] INFO   : preparing to send 6 bytes, subSys 0x01, cmdId 0x09, pData:
[14:39:40.026,606] [Z_STACK/MAIN] INFO   : [MUTEX] Lock SRSP Transaction Mutex
[14:39:40.026,638] [Z_STACK/MAIN] PKT_HEX: [         NPISRVR<<Z_STACK                           ] [SREQ] 06:21:09:83:00:00:02:FF:FF
[14:39:40.026,674] [Z_STACK/MAIN] PKTTYPE: [         NPISRVR<<Z_STACK                           ] [SREQ] 06:21:09:83:00:00:02:FF:FF
[14:39:40.026,802] [Z_STACK/MAIN] INFO   : Waiting for synchronous response...
[14:39:40.026,820] [Z_STACK/MAIN] INFO   : [MUTEX] Lock SRSP Mutex
[14:39:40.026,832] [Z_STACK/MAIN] INFO   : [MUTEX] Wait for SRSP Cond signal...
[14:39:42.026,908] [Z_STACK/MAIN] INFO   : [MUTEX] SRSP Cond Wait timed out!
[14:39:42.026,971] [Z_STACK/MAIN] ERROR  : SRSP Cond Wait timed out!
[14:39:42.026,984] [Z_STACK/MAIN] INFO   : [MUTEX] Unlock SRSP Mutex
[14:39:42.026,999] [Z_STACK/MAIN] ERROR  : apicSendSynchData() failed getting response
[14:39:42.027,016] [Z_STACK/MAIN] INFO   : znp_misc sendNPIExpectDefaultStatusZNP: subSys:1, cmdID:9, len::5
[14:39:42.027,030] [Z_STACK/MAIN] INFO   : preparing to send 5 bytes, subSys 0x01, cmdId 0x09, pData:
[14:39:42.027,042] [Z_STACK/MAIN] INFO   : [MUTEX] Lock SRSP Transaction Mutex
[14:39:42.027,075] [Z_STACK/MAIN] PKT_HEX: [         NPISRVR<<Z_STACK                           ] [SREQ] 05:21:09:87:00:00:01:00
[14:39:42.027,105] [Z_STACK/MAIN] PKTTYPE: [         NPISRVR<<Z_STACK                           ] [SREQ] 05:21:09:87:00:00:01:00
[14:39:42.027,248] [Z_STACK/MAIN] INFO   : Waiting for synchronous response...
[14:39:42.027,265] [Z_STACK/MAIN] INFO   : [MUTEX] Lock SRSP Mutex
[14:39:42.027,276] [Z_STACK/MAIN] INFO   : [MUTEX] Wait for SRSP Cond signal...
[14:39:44.027,346] [Z_STACK/MAIN] INFO   : [MUTEX] SRSP Cond Wait timed out!
[14:39:44.027,411] [Z_STACK/MAIN] ERROR  : SRSP Cond Wait timed out!
[14:39:44.027,425] [Z_STACK/MAIN] INFO   : [MUTEX] Unlock SRSP Mutex
[14:39:44.027,441] [Z_STACK/MAIN] ERROR  : apicSendSynchData() failed getting response
[14:39:44.027,458] [Z_STACK/MAIN] INFO   : znp_misc sendNPIExpectDefaultStatusZNP: subSys:1, cmdID:15, len::7
[14:39:44.027,472] [Z_STACK/MAIN] INFO   : preparing to send 7 bytes, subSys 0x01, cmdId 0x15, pData:
[14:39:44.027,484] [Z_STACK/MAIN] INFO   : [MUTEX] Lock SRSP Transaction Mutex
[14:39:44.027,519] [Z_STACK/MAIN] PKT_HEX: [         NPISRVR<<Z_STACK                           ] [SREQ] 07:21:15:96:00:C4:64:00:00:00
[14:39:44.027,551] [Z_STACK/MAIN] PKTTYPE: [         NPISRVR<<Z_STACK                           ] [SREQ] 07:21:15:96:00:C4:64:00:00:00
[14:39:44.027,689] [Z_STACK/MAIN] INFO   : Waiting for synchronous response...
[14:39:44.027,710] [Z_STACK/MAIN] INFO   : [MUTEX] Lock SRSP Mutex
[14:39:44.027,722] [Z_STACK/MAIN] INFO   : [MUTEX] Wait for SRSP Cond signal...
[<-- 000:00:12.025269 (+0.    93)] [UART] result: 6
[<-- 000:00:12.025276 (+0.     7)] [UART] (synch data) Conditional wait 6 s
[UART] Send synch data timed out
[ERR] SRSP: npi_ipc_errno 0x02040100
!Done
Synchronous Request Timeout...
Receive message...
[<-- 000:00:18.025586 (+6.   310)] 01 bytes, subSys 0x2F, cmdId 0x02, pData:    0x08
NPI SREQ:  (len 4) 0x01 0x2F 0x02 0x08
[<-- 000:00:18.025601 (+0.    15)] [UART] write 6 bytes to 4
[14:39:46.025,622] [NPISRVR/MAIN] PKT_HEX: [SOCZIGB<<NPISRVR                                    ] [send] 01:2F:02:08
[14:39:46.027,784] [Z_STACK/MAIN] INFO   : [MUTEX] SRSP Cond Wait timed out!
[14:39:46.027,818] [Z_STACK/MAIN] ERROR  : SRSP Cond Wait timed out!
[14:39:46.027,830] [Z_STACK/MAIN] INFO   : [MUTEX] Unlock SRSP Mutex
[14:39:46.027,843] [Z_STACK/MAIN] ERROR  : apicSendSynchData() failed getting response
[14:39:46.027,857] [Z_STACK/MAIN] INFO   : Port: 2536
[14:39:46.028,229] [Z_STACK/MAIN] INFO   : Following IP addresses are available:

[14:39:46.028,452] [Z_STACK/MAIN] INFO   :  IPv4: interface: lo  IP Address 127.0.0.1
[14:39:46.028,473] [Z_STACK/MAIN] INFO   :  IPv6: interface: lo  IP Address ::1
[14:39:46.028,490] [Z_STACK/MAIN] INFO   : The socket will listen on the following IP addresses:

[14:39:46.028,504] [Z_STACK/MAIN] INFO   :   IPv4: 0.0.0.0
[14:39:46.028,515] [Z_STACK/MAIN] INFO   :   IPv6: ::
[14:39:46.028,525] [Z_STACK/MAIN] INFO   : 0.0.0.0 means it will listen to all available IP address

[14:39:46.028,578] [Z_STACK/MAIN] MISC1  : waiting for first connection on #4...
[14:39:46.028,766] [Z_STACK/MAIN] INFO   : znp_misc sendNPIExpectDefaultStatusZNP: subSys:f, cmdID:5, len::1
[14:39:46.028,787] [Z_STACK/MAIN] INFO   : preparing to send 1 bytes, subSys 0x0F, cmdId 0x05, pData:
[14:39:46.028,800] [Z_STACK/MAIN] INFO   : [MUTEX] Lock SRSP Transaction Mutex
[14:39:46.028,827] [Z_STACK/MAIN] PKT_HEX: [         NPISRVR<<Z_STACK                           ] [SREQ] 01:2F:05:04
[14:39:46.028,852] [Z_STACK/MAIN] PKTTYPE: [         NPISRVR<<Z_STACK                           ] [SREQ] 01:2F:05:04
[14:39:46.029,032] [Z_STACK/MAIN] INFO   : Waiting for synchronous response...
[14:39:46.029,052] [Z_STACK/MAIN] INFO   : [MUTEX] Lock SRSP Mutex
[14:39:46.029,064] [Z_STACK/MAIN] INFO   : [MUTEX] Wait for SRSP Cond signal...
Startup phase 2 completed successfully, server started (ZLSZNP_PID=6477) on Mon 24 May 2021 02:39:46 PM UTC
===================================================
starting NETWORK_MGR, cmd ' ./NWKMGR_SRVR_arm 127.0.0.1:2536 -v 0xFFFFFFFF ' on Mon 24 May 2021 02:39:46 PM UTC
[14:39:46.042,744] [NWK_MGR/MAIN] INFO   :  there are 2 args
[14:39:46.042,934] [NWK_MGR/MAIN] INFO   :  argv[0] = ./NWKMGR_SRVR_arm
[14:39:46.042,945] [NWK_MGR/MAIN] INFO   :  argv[1] = 127.0.0.1:2536
[14:39:46.042,981] [NWK_MGR/MAIN] MISC1  : Port: 2536

[14:39:46.043,008] [NWK_MGR/MAIN] MISC1  : IP addresses for 127.0.0.1:

[14:39:46.043,022] [NWK_MGR/MAIN] MISC1  :   IPv4: 127.0.0.1
[14:39:46.043,031] [NWK_MGR/MAIN] MISC1  : Trying to connect...
[14:39:46.043,259] [NWK_MGR/MAIN] MISC1  : Connected.
[14:39:46.043,331] [Z_STACK/LSTN] MISC1  : Connected to #5.(127.0.0.1 / ::)
[14:39:46.043,360] [Z_STACK/LSTN] INFO   : zstackpb zspbHandlePbCb - connected: 5
[14:39:46.043,370] [Z_STACK/LSTN] CONNECT: Connected to new client, connection # 5
[14:39:46.043,474] [NWK_MGR/MAIN] UNMSKBL: 
[14:39:46.043,490] [NWK_MGR/MAIN] UNMSKBL:  ************************************************
[14:39:46.043,499] [NWK_MGR/MAIN] UNMSKBL:  *  Network Manager Server v1.0.2d              *
[14:39:46.043,509] [NWK_MGR/MAIN] UNMSKBL:  ************************************************
[14:39:46.043,522] [NWK_MGR/MAIN] UNMSKBL: 
[14:39:46.043,537] [NWK_MGR/HNDL] INFO   : [MUTEX] Wait for AREQ semaphore
[14:39:46.043,565] [NWK_MGR/MAIN] INFO   : trying to send 8 bytes, subSys 0x1F, cmdId 0x00
[14:39:46.043,715] [Z_STACK/LSTN] INFO   : Receive message...
[14:39:46.043,747] [Z_STACK/LSTN] CONNECT: Client at connection # 5 identified itself as NWK_MGR
[14:39:46.043,762] [Z_STACK/LSTN] INFO   : zstackpb zspbHandlePbCb: subsystemID:5f, cmdId:0
[14:39:46.043,772] [Z_STACK/LSTN] INFO   : !Done
[14:39:46.045,494] [Z_STACK/LSTN] INFO   : Receive message...
[14:39:46.045,517] [Z_STACK/LSTN] INFO   : zstackpb zspbHandlePbCb: subsystemID:31, cmdId:14
[14:39:46.045,903] [Z_STACK/LSTN] PKT_HEX: [                  Z_STACK>>NWK_MGR                  ] [ucst] 04:00:71:FA:08:14:10:00
[14:39:46.045,926] [Z_STACK/LSTN] PKTTYPE: [                  Z_STACK>>NWK_MGR                  ] zstackDefaultRsp
[14:39:46.045,942] [Z_STACK/LSTN] PKTBODY:                                                          cmdID = DEV_ZDO_CBS_REQ
[14:39:46.045,956] [Z_STACK/LSTN] PKTBODY:                                                          status = ZSuccess
[14:39:46.046,025] [Z_STACK/LSTN] INFO   : ...sent 8 bytes to Client
[14:39:46.046,047] [Z_STACK/LSTN] INFO   : !Done
[14:39:46.046,236] [Z_STACK/LSTN] INFO   : Receive message...
[14:39:46.046,255] [Z_STACK/LSTN] INFO   : zstackpb zspbHandlePbCb: subsystemID:31, cmdId:8
[14:39:46.046,268] [Z_STACK/LSTN] INFO   : preparing to send 0 bytes, subSys 0x05, cmdId 0x50, pData:
[14:39:46.046,277] [Z_STACK/LSTN] INFO   : [MUTEX] Lock SRSP Transaction Mutex
[14:39:46.043,600] [NWK_MGR/MAIN] PKT_HEX: [                  Z_STACK<<NWK_MGR                  ] [AREQ] 08:00:5F:00:03:4E:57:4B:5F:4D:47:52
[14:39:46.043,632] [NWK_MGR/MAIN] PKTTYPE: [                  Z_STACK<<NWK_MGR                  ] [AREQ] 08:00:5F:00:03:4E:57:4B:5F:4D:47:52
[14:39:46.043,884] [NWK_MGR/MAIN] MISC1  : NwkMgr: Sending Device ZDO CB Request
[14:39:46.044,561] [NWK_MGR/MAIN] INFO   : preparing to send 90 bytes, subSys 0x11, cmdId 0x14, pData:
[14:39:46.044,574] [NWK_MGR/MAIN] INFO   : [MUTEX] Lock SRSP Transaction Mutex
[14:39:46.044,682] [NWK_MGR/MAIN] PKT_HEX: [                  Z_STACK<<NWK_MGR                  ] [SREQ] 5A:00:31:14:08:14:10:01:18:01:20:01:28:01:30:01:38:01:40:01:48:01:50:01:58:01:60:01:68:01:70:01:71
[14:39:46.044,703] [NWK_MGR/MAIN] PKTTYPE: [                  Z_STACK<<NWK_MGR                  ] devZDOCBReq
[14:39:46.044,970] [NWK_MGR/MAIN] PKTBODY:                                                          cmdID = DEV_ZDO_CBS_REQ
[14:39:46.044,986] [NWK_MGR/MAIN] PKTBODY:                                                          srcRtgIndCB = 1
[14:39:46.044,999] [NWK_MGR/MAIN] PKTBODY:                                                          concentratorIndCb = 1
[14:39:46.045,014] [NWK_MGR/MAIN] PKTBODY:                                                          nwkDiscCnfCB = 1
[14:39:46.045,027] [NWK_MGR/MAIN] PKTBODY:                                                          beaconNotIndCB = 1
[14:39:46.045,039] [NWK_MGR/MAIN] PKTBODY:                                                          joinCnfCB = 1
[14:39:46.045,052] [NWK_MGR/MAIN] PKTBODY:                                                          leaveCnfCB = 1
[14:39:46.045,067] [NWK_MGR/MAIN] PKTBODY:                                                          leaveIndCB = 1
[14:39:46.045,080] [NWK_MGR/MAIN] PKTBODY:                                                          nwkAddrRsp = 1
[14:39:46.045,093] [NWK_MGR/MAIN] PKTBODY:                                                          ieeeAddrRsp = 1
[14:39:46.045,106] [NWK_MGR/MAIN] PKTBODY:                                                          nodeDescRsp = 1
[14:39:46.045,121] [NWK_MGR/MAIN] PKTBODY:                                                          powerDescRsp = 1
[14:39:46.045,134] [NWK_MGR/MAIN] PKTBODY:                                                          simpleDescRsp = 1
[14:39:46.045,147] [NWK_MGR/MAIN] PKTBODY:                                                          activeEndpointRsp = 1
[14:39:46.045,160] [NWK_MGR/MAIN] PKTBODY:                                                          matchDescRsp = 1
[14:39:46.045,174] [NWK_MGR/MAIN] PKTBODY:                                                          complexDescRsp = 1
[14:39:46.045,187] [NWK_MGR/MAIN] PKTBODY:                                                          userDescRsp = 1
[14:39:46.045,200] [NWK_MGR/MAIN] PKTBODY:                                                          discoveryCacheRsp = 1
[14:39:46.045,215] [NWK_MGR/MAIN] PKTBODY:                                                          userDescCnf = 1
[14:39:46.045,228] [NWK_MGR/MAIN] PKTBODY:                                                          serverDiscoveryRsp = 1
[14:39:46.045,243] [NWK_MGR/MAIN] PKTBODY:                                                          endDeviceTimeoutRsp = 1
[14:39:46.045,258] [NWK_MGR/MAIN] PKTBODY:                                                          bindRsp = 1
[14:39:46.045,271] [NWK_MGR/MAIN] PKTBODY:                                                          endDeviceBindRsp = 1
[14:39:46.045,284] [NWK_MGR/MAIN] PKTBODY:                                                          unbindRsp = 1
[14:39:46.045,297] [NWK_MGR/MAIN] PKTBODY:                                                          mgmtNwkDiscRsp = 1
[14:39:46.045,311] [NWK_MGR/MAIN] PKTBODY:                                                          mgmtLqiRsp = 1
[14:39:46.045,324] [NWK_MGR/MAIN] PKTBODY:                                                          mgmtRtgRsp = 1
[14:39:46.045,337] [NWK_MGR/MAIN] PKTBODY:                                                          mgmtBindRsp = 1
[14:39:46.045,350] [NWK_MGR/MAIN] PKTBODY:                                                          mgmtLeaveRsp = 1
[14:39:46.045,364] [NWK_MGR/MAIN] PKTBODY:                                                          mgmtDirectJoinRsp = 1
[14:39:46.045,377] [NWK_MGR/MAIN] PKTBODY:                                                          mgmtPermitJoinRsp = 1
[14:39:46.045,390] [NWK_MGR/MAIN] PKTBODY:                                                          mgmtNwkUpdateNotify = 1
[14:39:46.045,405] [NWK_MGR/MAIN] PKTBODY:                                                          deviceAnnounce = 1
[14:39:46.045,416] [NWK_MGR/MAIN] PKTBODY:                                                          devStateChange = 1
[14:39:46.045,428] [NWK_MGR/MAIN] PKTBODY:                                                          tcDeviceInd = 1
[14:39:46.045,500] [NWK_MGR/MAIN] INFO   : Waiting for synchronous response...
[14:39:46.045,511] [NWK_MGR/MAIN] INFO   : [MUTEX] Lock SRSP Mutex
[14:39:46.045,519] [NWK_MGR/MAIN] INFO   : [MUTEX] Wait for SRSP Cond signal...
[14:39:46.046,024] [NWK_MGR/READ] INFO   : Received 4 bytes, subSys 0x71, cmdId 0xFA
[14:39:46.046,048] [NWK_MGR/READ] INFO   : [MUTEX] SRSP Cond signal set
[14:39:46.046,057] [NWK_MGR/READ] INFO   : Client Read: (len 8):
[14:39:46.046,082] [NWK_MGR/MAIN] INFO   : [MUTEX] Unlock SRSP Mutex
[14:39:46.046,102] [NWK_MGR/MAIN] MISC1  : ZDO Callback Register Response Successful
[14:39:46.046,113] [NWK_MGR/MAIN] MISC1  : NwkMgr sendSysNwkInfoReadReqAndSetTxPower:
[14:39:46.046,127] [NWK_MGR/MAIN] INFO   : preparing to send 2 bytes, subSys 0x11, cmdId 0x08, pData:
[14:39:46.046,139] [NWK_MGR/MAIN] INFO   : [MUTEX] Lock SRSP Transaction Mutex
[14:39:46.046,160] [NWK_MGR/MAIN] PKT_HEX: [                  Z_STACK<<NWK_MGR                  ] [SREQ] 02:00:31:08:08:08
[14:39:46.046,179] [NWK_MGR/MAIN] PKTTYPE: [                  Z_STACK<<NWK_MGR                  ] sysNwkInfoReadReq
[14:39:46.046,195] [NWK_MGR/MAIN] PKTBODY:                                                          cmdID = SYS_NWK_INFO_READ_REQ
[14:39:46.046,239] [NWK_MGR/MAIN] INFO   : Waiting for synchronous response...
[14:39:46.046,249] [NWK_MGR/MAIN] INFO   : [MUTEX] Lock SRSP Mutex
[14:39:46.046,257] [NWK_MGR/MAIN] INFO   : [MUTEX] Wait for SRSP Cond signal...
[14:39:48.029,142] [Z_STACK/MAIN] INFO   : [MUTEX] SRSP Cond Wait timed out!
[14:39:48.029,198] [Z_STACK/MAIN] ERROR  : SRSP Cond Wait timed out!
[14:39:48.029,211] [Z_STACK/MAIN] INFO   : [MUTEX] Unlock SRSP Mutex
[14:39:48.029,238] [Z_STACK/MAIN] ERROR  : apicSendSynchData() failed getting response
[14:39:48.029,267] [Z_STACK/LSTN] PKT_HEX: [         NPISRVR<<Z_STACK                           ] [SREQ] 00:25:50
[14:39:48.029,309] [Z_STACK/LSTN] PKTTYPE: [         NPISRVR<<Z_STACK                           ] [SREQ] 00:25:50
[14:39:48.029,433] [Z_STACK/LSTN] INFO   : Waiting for synchronous response...
[14:39:48.029,451] [Z_STACK/LSTN] INFO   : [MUTEX] Lock SRSP Mutex
[14:39:48.029,463] [Z_STACK/LSTN] INFO   : [MUTEX] Wait for SRSP Cond signal...
[14:39:48.046,338] [NWK_MGR/MAIN] INFO   : [MUTEX] SRSP Cond Wait timed out!
[14:39:48.046,370] [NWK_MGR/MAIN] ERROR  : SRSP Cond Wait timed out!
[14:39:48.046,382] [NWK_MGR/MAIN] INFO   : [MUTEX] Unlock SRSP Mutex
[14:39:48.046,395] [NWK_MGR/MAIN] ERROR  : apicSendSynchData() failed getting response
[14:39:48.047,754] [NWK_MGR/MAIN] MISC1  : Opened Database 'DbDeviceInfo.csv', 0 records
[14:39:48.048,058] [NWK_MGR/MAIN] MISC1  : Opened Database 'DbEndpoints.csv', 0 records
[14:39:48.048,699] [NWK_MGR/MAIN] ERROR  : Reading Local Network Information Failed
[14:39:48.048,723] [NWK_MGR/MAIN] UNMSKBL: Initialization failed. Quitting now.

Startup phase 3 failed
./zigbeeHAgw: line 623: killall: command not found
waiting for Zstack linux to exit
[14:39:50.029,543] [Z_STACK/LSTN] INFO   : [MUTEX] SRSP Cond Wait timed out!
[14:39:50.029,604] [Z_STACK/LSTN] ERROR  : SRSP Cond Wait timed out!
[14:39:50.029,617] [Z_STACK/LSTN] INFO   : [MUTEX] Unlock SRSP Mutex
[14:39:50.029,657] [Z_STACK/LSTN] ERROR  : apicSendSynchData() failed getting response
[14:39:50.029,670] [Z_STACK/LSTN] INFO   : zstackpb Sending Network Info Response
[14:39:50.029,727] [Z_STACK/LSTN] INFO   : znp_misc osal_nv_read: id:1, len:8
[14:39:50.029,744] [Z_STACK/LSTN] INFO   : preparing to send 3 bytes, subSys 0x01, cmdId 0x08, pData:
[14:39:50.029,756] [Z_STACK/LSTN] INFO   : [MUTEX] Lock SRSP Transaction Mutex
[14:39:50.029,789] [Z_STACK/LSTN] PKT_HEX: [         NPISRVR<<Z_STACK                           ] [SREQ] 03:21:08:01:00:00
[14:39:50.029,816] [Z_STACK/LSTN] PKTTYPE: [         NPISRVR<<Z_STACK                           ] [SREQ] 03:21:08:01:00:00
[14:39:50.029,950] [Z_STACK/LSTN] INFO   : Waiting for synchronous response...
[14:39:50.029,970] [Z_STACK/LSTN] INFO   : [MUTEX] Lock SRSP Mutex
[14:39:50.029,982] [Z_STACK/LSTN] INFO   : [MUTEX] Wait for SRSP Cond signal...
[<-- 000:00:18.025695 (+0.    94)] [UART] result: 6
[<-- 000:00:18.025703 (+0.     8)] [UART] (synch data) Conditional wait 6 s
[UART] Send synch data timed out
[ERR] SRSP: npi_ipc_errno 0x02040100
!Done
Synchronous Request Timeout...
Receive message...
[<-- 000:00:24.026007 (+6.   304)] 05 bytes, subSys 0x2F, cmdId 0x08, pData:    0x00 0x00 0x00 0x00 0x00
NPI SREQ:  (len 8) 0x05 0x2F 0x08 0x00 0x00 0x00 0x00 0x00
[<-- 000:00:24.026032 (+0.    25)] [UART] write 10 bytes to 4
[14:39:52.026,059] [NPISRVR/MAIN] PKT_HEX: [SOCZIGB<<NPISRVR                                    ] [send] 05:2F:08:00:00:00:00:00
[14:39:52.030,043] [Z_STACK/LSTN] INFO   : [MUTEX] SRSP Cond Wait timed out!
[14:39:52.030,077] [Z_STACK/LSTN] ERROR  : SRSP Cond Wait timed out!
[14:39:52.030,090] [Z_STACK/LSTN] INFO   : [MUTEX] Unlock SRSP Mutex
[14:39:52.030,102] [Z_STACK/LSTN] ERROR  : apicSendSynchData() failed getting response
[14:39:52.030,459] [Z_STACK/LSTN] PKT_HEX: [                  Z_STACK>>NWK_MGR                  ] [ucst] 2F:00:71:0E:08:0E:10:00:19:00:00:00:00:00:00:00:00:20:00:28:00:31:00:00:00:00:00:00:00:00:38:00:40
[14:39:52.030,491] [Z_STACK/LSTN] PKTTYPE: [                  Z_STACK>>NWK_MGR                  ] sysNwkInfoReadRsp
[14:39:52.030,518] [Z_STACK/LSTN] PKTBODY:                                                          cmdID = SYS_NWK_INFO_READ_RSP
[14:39:52.030,537] [Z_STACK/LSTN] PKTBODY:                                                          nwkAddr = 0x00000000 (0)
[14:39:52.030,555] [Z_STACK/LSTN] PKTBODY:                                                          ieeeAddr = 00:00:00:00:00:00:00:00
[14:39:52.030,571] [Z_STACK/LSTN] PKTBODY:                                                          devState = HOLD
[14:39:52.030,586] [Z_STACK/LSTN] PKTBODY:                                                          panId = 0x00000000 (0)
[14:39:52.030,604] [Z_STACK/LSTN] PKTBODY:                                                          extendedPanId = 00:00:00:00:00:00:00:00
[14:39:52.030,621] [Z_STACK/LSTN] PKTBODY:                                                          coordAddr = 0x00000000 (0)
[14:39:52.030,637] [Z_STACK/LSTN] PKTBODY:                                                          coordExtAddr = 00:00:00:00:00:00:00:00
[14:39:52.030,653] [Z_STACK/LSTN] PKTBODY:                                                          devTypes :
[14:39:52.030,714] [Z_STACK/LSTN] ERROR  : ERROR: signal 11 was trigerred:
[14:39:52.030,732] [Z_STACK/LSTN] ERROR  :   Fault address: 0x840012a8
[14:39:52.030,744] [Z_STACK/LSTN] ERROR  :   Fault reason: address not mapped to object
[14:39:52.031,713] [Z_STACK/LSTN] ERROR  : Stack trace unavailable
[14:39:52.031,741] [Z_STACK/LSTN] ERROR  : Executing original handler...
./zigbeeHAgw: line 638: killall: command not found
waiting for NPI to exit
[<-- 000:00:24.026132 (+0.   100)] [UART] result: 10
[<-- 000:00:24.026139 (+0.     7)] [UART] (synch data) Conditional wait 6 s
[UART] Send synch data timed out
[ERR] SRSP: npi_ipc_errno 0x02040100
!Done
Synchronous Request Timeout...
Receive message...
[<-- 000:00:30.026456 (+6.   317)] 05 bytes, subSys 0x2F, cmdId 0x08, pData:    0x01 0x00 0x20 0x00 0x00
NPI SREQ:  (len 8) 0x05 0x2F 0x08 0x01 0x00 0x20 0x00 0x00
[<-- 000:00:30.026478 (+0.    22)] [UART] write 10 bytes to 4
[14:39:58.026,506] [NPISRVR/MAIN] PKT_HEX: [SOCZIGB<<NPISRVR                                    ] [send] 05:2F:08:01:00:20:00:00
[<-- 000:00:30.026578 (+0.   100)] [UART] result: 10
[<-- 000:00:30.026587 (+0.     9)] [UART] (synch data) Conditional wait 6 s
[UART] Send synch data timed out
[ERR] SRSP: npi_ipc_errno 0x02040100
!Done
Synchronous Request Timeout...
Receive message...
[<-- 000:00:36.028162 (+6.  1575)] 06 bytes, subSys 0x21, cmdId 0x09, pData:    0x83 0x00 0x00 0x02 0xFF 0xFF
NPI SREQ:  (len 9) 0x06 0x21 0x09 0x83 0x00 0x00 0x02 0xFF 0xFF
[<-- 000:00:36.028189 (+0.    27)] [UART] write 11 bytes to 4
[14:40:04.028,219] [NPISRVR/MAIN] PKT_HEX: [SOCZIGB<<NPISRVR                                    ] [send] 06:21:09:83:00:00:02:FF:FF
[<-- 000:00:36.028294 (+0.   105)] [UART] result: 11
[<-- 000:00:36.028303 (+0.     9)] [UART] (synch data) Conditional wait 6 s
[UART] Send synch data timed out
[ERR] SRSP: npi_ipc_errno 0x02040100
!Done
Synchronous Request Timeout...
Receive message...
[<-- 000:00:42.028604 (+6.   301)] 05 bytes, subSys 0x21, cmdId 0x09, pData:    0x87 0x00 0x00 0x01 0x00
NPI SREQ:  (len 8) 0x05 0x21 0x09 0x87 0x00 0x00 0x01 0x00
[<-- 000:00:42.028626 (+0.    22)] [UART] write 10 bytes to 4
[14:40:10.028,654] [NPISRVR/MAIN] PKT_HEX: [SOCZIGB<<NPISRVR                                    ] [send] 05:21:09:87:00:00:01:00
[<-- 000:00:42.028725 (+0.    99)] [UART] result: 10
[<-- 000:00:42.028732 (+0.     7)] [UART] (synch data) Conditional wait 6 s
[<-- 000:00:45.957994 (+3.929262)] Signal from UART, grabbing mutex
[<-- 000:00:45.958034 (+0.    40)] Signal read handle, owning mutex
[<-- 000:00:45.958082 (+0.    48)] Signal from UART, grabbing mutex
[<-- 000:00:45.958086 (+0.     4)] Signal read handle, owning mutex
[UART] Send synch data timed out
[ERR] SRSP: npi_ipc_errno 0x02040100
!Done
Synchronous Request Timeout...
Receive message...
[<-- 000:00:48.029033 (+2. 70947)] 07 bytes, subSys 0x21, cmdId 0x15, pData:    0x96 0x00 0xC4 0x64 0x00 0x00 0x00
NPI SREQ:  (len 10) 0x07 0x21 0x15 0x96 0x00 0xC4 0x64 0x00 0x00 0x00
[<-- 000:00:48.029061 (+0.    28)] [UART] write 12 bytes to 4
[14:40:16.029,090] [NPISRVR/MAIN] PKT_HEX: [SOCZIGB<<NPISRVR                                    ] [send] 07:21:15:96:00:C4:64:00:00:00
[<-- 000:00:48.029164 (+0.   103)] [UART] result: 12
[<-- 000:00:48.029171 (+0.     7)] [UART] (synch data) Conditional wait 6 s
[UART] Send synch data timed out
[ERR] SRSP: npi_ipc_errno 0x02040100
!Done
Synchronous Request Timeout...
Receive message...
[<-- 000:00:54.029484 (+6.   313)] 01 bytes, subSys 0x2F, cmdId 0x05, pData:    0x04
NPI SREQ:  (len 4) 0x01 0x2F 0x05 0x04
[<-- 000:00:54.029500 (+0.    16)] [UART] write 6 bytes to 4
[14:40:22.029,523] [NPISRVR/MAIN] PKT_HEX: [SOCZIGB<<NPISRVR                                    ] [send] 01:2F:05:04
^Z
[1]+  Stopped                 ./zigbeeHAgw