/** * These arguments were used when this file was generated. They will be automatically applied on subsequent loads * via the GUI or CLI. Run CLI with '--help' for additional information on how to override these arguments. * @cliArgs --device "MSPM0G350X" --package "LQFP-64(PM)" --part "Default" --product "mspm0_sdk@2.01.00.03" * @versions {"tool":"1.19.0+3426"} */ /** * Import the modules used in this configuration. */ const ADC12 = scripting.addModule("/ti/driverlib/ADC12", {}, false); const ADC121 = ADC12.addInstance(); const ADC122 = ADC12.addInstance(); const DMA = scripting.addModule("/ti/driverlib/DMA"); const GPIO = scripting.addModule("/ti/driverlib/GPIO", {}, false); const GPIO1 = GPIO.addInstance(); const GPIO2 = GPIO.addInstance(); const GPIO3 = GPIO.addInstance(); const GPIO4 = GPIO.addInstance(); const GPIO5 = GPIO.addInstance(); const GPIO6 = GPIO.addInstance(); const I2C = scripting.addModule("/ti/driverlib/I2C", {}, false); const I2C1 = I2C.addInstance(); const PWM = scripting.addModule("/ti/driverlib/PWM", {}, false); const PWM1 = PWM.addInstance(); const SPI = scripting.addModule("/ti/driverlib/SPI", {}, false); const SPI1 = SPI.addInstance(); const SYSCTL = scripting.addModule("/ti/driverlib/SYSCTL"); const TIMER = scripting.addModule("/ti/driverlib/TIMER", {}, false); const TIMER1 = TIMER.addInstance(); const TIMER2 = TIMER.addInstance(); const UART = scripting.addModule("/ti/driverlib/UART", {}, false); const UART1 = UART.addInstance(); const ProjectConfig = scripting.addModule("/ti/project_config/ProjectConfig"); /** * Write custom configuration values to the imported modules. */ const divider7 = system.clockTree["PLL_PDIV"]; divider7.divideValue = 2; const divider9 = system.clockTree["UDIV"]; divider9.divideValue = 2; const multiplier2 = system.clockTree["PLL_QDIV"]; multiplier2.multiplyValue = 10; const mux8 = system.clockTree["HSCLKMUX"]; mux8.inputSelect = "HSCLKMUX_SYSPLL0"; ADC121.$name = "ADC12_0"; ADC121.adcMem0avgen = true; ADC121.adcMem1chansel = "DL_ADC12_INPUT_CHAN_1"; ADC121.adcMem1avgen = true; ADC121.samplingOperationMode = "sequence"; ADC121.sampClkSrc = "DL_ADC12_CLOCK_ULPCLK"; ADC121.sampCnt = 1; ADC121.repeatMode = true; ADC121.enableFIFO = true; ADC121.configureDMA = true; ADC121.sampleTime0 = "0.25 us"; ADC121.sampleTime1 = "0.25 us"; ADC121.enabledEvents = ["DL_ADC12_EVENT_MEM0_RESULT_LOADED"]; ADC121.endAdd = 1; ADC121.powerDownMode = "DL_ADC12_POWER_DOWN_MODE_MANUAL"; ADC121.enabledInterrupts = ["DL_ADC12_INTERRUPT_DMA_DONE"]; ADC121.enabledDMATriggers = ["DL_ADC12_DMA_MEM1_RESULT_LOADED"]; ADC121.peripheral.$assign = "ADC0"; ADC121.peripheral.adcPin0.$assign = "PA27"; ADC121.peripheral.adcPin1.$assign = "PA26"; ADC121.adcPin0Config.$name = "ti_driverlib_gpio_GPIOPinGeneric9"; ADC121.DMA_CHANNEL.$name = "DMA_CH0"; ADC121.DMA_CHANNEL.configureTransferSize = true; ADC121.DMA_CHANNEL.addressMode = "f2b"; ADC121.DMA_CHANNEL.transferMode = "FULL_CH_REPEAT_SINGLE"; ADC121.DMA_CHANNEL.transferSize = 2; ADC121.DMA_CHANNEL.peripheral.$assign = "DMA_CH1"; ADC121.adcPin1Config.$name = "ti_driverlib_gpio_GPIOPinGeneric8"; ADC122.$name = "ADC12_1"; ADC122.endAdd = 1; ADC122.adcMem0avgen = true; ADC122.adcMem1chansel = "DL_ADC12_INPUT_CHAN_1"; ADC122.adcMem1avgen = true; ADC122.samplingOperationMode = "sequence"; ADC122.sampCnt = 1; ADC122.enableFIFO = true; ADC122.repeatMode = true; ADC122.enabledInterrupts = ["DL_ADC12_INTERRUPT_DMA_DONE"]; ADC122.configureDMA = true; ADC122.sampleTime0 = "0.25 us"; ADC122.sampleTime1 = "0.25 us"; ADC122.sampClkSrc = "DL_ADC12_CLOCK_ULPCLK"; ADC122.powerDownMode = "DL_ADC12_POWER_DOWN_MODE_MANUAL"; ADC122.enabledDMATriggers = ["DL_ADC12_DMA_MEM1_RESULT_LOADED"]; ADC122.peripheral.$assign = "ADC1"; ADC122.peripheral.adcPin0.$assign = "PA15"; ADC122.peripheral.adcPin1.$assign = "PA16"; ADC122.adcPin0Config.$name = "ti_driverlib_gpio_GPIOPinGeneric11"; ADC122.adcPin1Config.$name = "ti_driverlib_gpio_GPIOPinGeneric7"; ADC122.DMA_CHANNEL.$name = "DMA_CH1"; ADC122.DMA_CHANNEL.configureTransferSize = true; ADC122.DMA_CHANNEL.addressMode = "f2b"; ADC122.DMA_CHANNEL.transferMode = "FULL_CH_REPEAT_SINGLE"; ADC122.DMA_CHANNEL.transferSize = 2; ADC122.DMA_CHANNEL.peripheral.$assign = "DMA_CH2"; const Board = scripting.addModule("/ti/driverlib/Board", {}, false); Board.peripheral.$assign = "DEBUGSS"; Board.peripheral.swclkPin.$assign = "PA20"; Board.peripheral.swdioPin.$assign = "PA19"; GPIO1.port = "PORTA"; GPIO1.$name = "RS485"; GPIO1.associatedPins[0].$name = "ENABLE_RX_TX"; GPIO1.associatedPins[0].pin.$assign = "PA12"; GPIO2.$name = "MODBUS"; GPIO2.associatedPins.create(3); GPIO2.associatedPins[0].$name = "MASTER_ADD_S0_DB"; GPIO2.associatedPins[0].direction = "INPUT"; GPIO2.associatedPins[0].pin.$assign = "PB6"; GPIO2.associatedPins[1].$name = "MASTER_ADD_S1_DB"; GPIO2.associatedPins[1].direction = "INPUT"; GPIO2.associatedPins[1].pin.$assign = "PB7"; GPIO2.associatedPins[2].$name = "MASTER_ADD_S2_DB"; GPIO2.associatedPins[2].direction = "INPUT"; GPIO2.associatedPins[2].pin.$assign = "PB8"; GPIO3.$name = "MC_BOARD"; GPIO3.associatedPins.create(2); GPIO3.associatedPins[0].$name = "EN_DB"; GPIO3.associatedPins[0].pin.$assign = "PB15"; GPIO3.associatedPins[1].$name = "EEPROM_CS"; GPIO3.associatedPins[1].initialValue = "SET"; GPIO3.associatedPins[1].pin.$assign = "PB24"; GPIO4.$name = "INTERLOCK"; GPIO4.associatedPins[0].$name = "STATUS_DB"; GPIO4.associatedPins[0].direction = "INPUT"; GPIO4.associatedPins[0].pin.$assign = "PA17"; GPIO5.$name = "DIG_DB"; GPIO5.associatedPins.create(3); GPIO5.associatedPins[0].$name = "ADC1Toggle"; GPIO5.associatedPins[0].pin.$assign = "PB13"; GPIO5.associatedPins[1].$name = "ADC0Toggle"; GPIO5.associatedPins[1].pin.$assign = "PB4"; GPIO5.associatedPins[2].$name = "GPIO3"; GPIO5.associatedPins[2].pin.$assign = "PB19"; GPIO6.$name = "MUX_CONTROL"; GPIO6.port = "PORTA"; GPIO6.associatedPins.create(6); GPIO6.associatedPins[0].$name = "COL_CTRL1_DB"; GPIO6.associatedPins[0].pin.$assign = "PA21"; GPIO6.associatedPins[1].$name = "COL_CTRL2_DB"; GPIO6.associatedPins[1].pin.$assign = "PA22"; GPIO6.associatedPins[2].$name = "ROW_CTRL1_DB"; GPIO6.associatedPins[2].pin.$assign = "PA24"; GPIO6.associatedPins[3].$name = "ROW_CTRL2_DB"; GPIO6.associatedPins[3].pin.$assign = "PA25"; GPIO6.associatedPins[4].$name = "COL_CTRL3_DB"; GPIO6.associatedPins[4].pin.$assign = "PA23"; GPIO6.associatedPins[5].$name = "ROW_CTRL3_DB"; GPIO6.associatedPins[5].pin.$assign = "PA28"; I2C1.basicEnableController = true; I2C1.$name = "MC_I2C_DB"; I2C1.peripheral.$assign = "I2C1"; I2C1.peripheral.sdaPin.$assign = "PB3"; I2C1.peripheral.sclPin.$assign = "PB2"; I2C1.sdaPinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric2"; I2C1.sdaPinConfig.hideOutputInversion = scripting.forceWrite(false); I2C1.sdaPinConfig.onlyInternalResistor = scripting.forceWrite(false); I2C1.sdaPinConfig.passedPeripheralType = scripting.forceWrite("Digital"); I2C1.sclPinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric3"; I2C1.sclPinConfig.hideOutputInversion = scripting.forceWrite(false); I2C1.sclPinConfig.onlyInternalResistor = scripting.forceWrite(false); I2C1.sclPinConfig.passedPeripheralType = scripting.forceWrite("Digital"); PWM1.$name = "DUT_EN"; PWM1.enableShadowLoad = true; PWM1.ccIndex = [2]; PWM1.timerCount = 16000; PWM1.peripheral.$assign = "TIMA0"; PWM1.peripheral.ccp2Pin.$assign = "PB20"; PWM1.PWM_CHANNEL_2.$name = "ti_driverlib_pwm_PWMTimerCC0"; PWM1.PWM_CHANNEL_2.dutyCycle = 50; PWM1.ccp2PinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric13"; PWM1.ccp2PinConfig.enableConfig = true; SPI1.chipSelect = ["0","1"]; SPI1.$name = "MC_SPI_DB"; SPI1.enabledInterrupts = ["DMA_DONE_RX","DMA_DONE_TX","IDLE","RX","RX_TIMEOUT","TX"]; SPI1.frameFormat = "MOTO3"; SPI1.targetBitRate = 1000000; SPI1.peripheral.$assign = "SPI0"; SPI1.peripheral.sclkPin.$assign = "PA11"; SPI1.peripheral.mosiPin.$assign = "PA9"; SPI1.peripheral.misoPin.$assign = "PA10"; SPI1.sclkPinConfig.direction = scripting.forceWrite("OUTPUT"); SPI1.sclkPinConfig.onlyInternalResistor = scripting.forceWrite(false); SPI1.sclkPinConfig.passedPeripheralType = scripting.forceWrite("Digital"); SPI1.sclkPinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric4"; SPI1.mosiPinConfig.direction = scripting.forceWrite("OUTPUT"); SPI1.mosiPinConfig.hideOutputInversion = scripting.forceWrite(false); SPI1.mosiPinConfig.onlyInternalResistor = scripting.forceWrite(false); SPI1.mosiPinConfig.passedPeripheralType = scripting.forceWrite("Digital"); SPI1.mosiPinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric5"; SPI1.misoPinConfig.onlyInternalResistor = scripting.forceWrite(false); SPI1.misoPinConfig.passedPeripheralType = scripting.forceWrite("Digital"); SPI1.misoPinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric6"; SYSCTL.clockTreeEn = true; TIMER1.$name = "Modbus_TIMER_0"; TIMER1.timerPeriod = "60us"; TIMER1.timerMode = "ONE_SHOT_UP"; TIMER1.peripheral.$assign = "TIMG0"; TIMER2.timerPeriod = "60us"; TIMER2.timerMode = "ONE_SHOT_UP"; TIMER2.interrupts = ["ZERO"]; TIMER2.$name = "TimeOut_TIMER"; TIMER2.peripheral.$assign = "TIMG6"; UART1.$name = "MODBUS_UART_0"; UART1.enableFIFO = true; UART1.txFifoThreshold = "DL_UART_TX_FIFO_LEVEL_3_4_EMPTY"; UART1.rxFifoThreshold = "DL_UART_RX_FIFO_LEVEL_ONE_ENTRY"; UART1.uartMode = "RS485"; UART1.enabledDMATXTriggers = "DL_UART_DMA_INTERRUPT_TX"; UART1.analogGlitchFilter = "DL_UART_PULSE_WIDTH_50_NS"; UART1.digitalGlitchFilter = 2; UART1.enabledInterrupts = ["BREAK_ERROR","DMA_DONE_TX","EOT_DONE","FRAMING_ERROR","PARITY_ERROR","RX"]; UART1.peripheral.$assign = "UART0"; UART1.peripheral.rxPin.$assign = "PA1"; UART1.peripheral.txPin.$assign = "PA0"; UART1.txPinConfig.direction = scripting.forceWrite("OUTPUT"); UART1.txPinConfig.hideOutputInversion = scripting.forceWrite(false); UART1.txPinConfig.onlyInternalResistor = scripting.forceWrite(false); UART1.txPinConfig.passedPeripheralType = scripting.forceWrite("Digital"); UART1.txPinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric0"; UART1.rxPinConfig.hideOutputInversion = scripting.forceWrite(false); UART1.rxPinConfig.onlyInternalResistor = scripting.forceWrite(false); UART1.rxPinConfig.passedPeripheralType = scripting.forceWrite("Digital"); UART1.rxPinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric1"; UART1.DMA_CHANNEL_TX.$name = "UART0_DMA_CH0"; UART1.DMA_CHANNEL_TX.addressMode = "b2f"; UART1.DMA_CHANNEL_TX.srcLength = "BYTE"; UART1.DMA_CHANNEL_TX.dstLength = "BYTE"; UART1.DMA_CHANNEL_TX.configureTransferSize = true; UART1.DMA_CHANNEL_TX.enableInterrupt = true; UART1.DMA_CHANNEL_TX.peripheral.$assign = "DMA_CH0"; ProjectConfig.deviceSpin = "MSPM0G3507";