Write Log: Starting write of 358 parameters ... Wrote VOUT_MODE [Rail #1] EXP -12 [0x14] to RAM Wrote VOUT_MODE [Rail #2] EXP -12 [0x14] to RAM Wrote VOUT_MODE [Rail #3] EXP -13 [0x13] to RAM Wrote VOUT_MODE [Rail #4] EXP -13 [0x13] to RAM Wrote VOUT_MODE [Rail #5] EXP -13 [0x13] to RAM Wrote VOUT_MODE [Rail #6] EXP -14 [0x12] to RAM Wrote VOUT_MODE [Rail #7] EXP -14 [0x12] to RAM Wrote VOUT_MODE [Rail #8] EXP -14 [0x12] to RAM Wrote VOUT_MODE [Rail #9] EXP -10 [0x16] to RAM Wrote VOUT_MODE [Rail #10] EXP -14 [0x12] to RAM Wrote MONITOR_CONFIG [MFR 05] Pin 1 MON1: Not Assigned; Pin 2 MON2: Rail #8, Type Voltage; Pin 38 MON3: Rail #5, Type Voltage; Pin 39 MON4: Not Assigned; Pin 40 MON5: Rail #4, Type Voltage; Pin 41 MON6: Rail #3, Type Voltage; Pin 42 MON7: Rail #7, Type Voltage; Pin 45 MON8: Rail #9, Type Voltage; Pin 46 MON9: Rail #6, Type Voltage; Pin 48 MON10: Rail #1, Type Voltage; Pin 37 MON11: Rail #2, Type Voltage [0x0027240023222628252021] to RAM Wrote GPI_CONFIG [MFR 41] Inputs: Pin 26 GPIO17 ActiveLow Input,Pin 21 GPIO14 ActiveHigh Input,Pin 15 FPWM6_GPIO10 ActiveHigh Input,Pin 25 GPIO16 ActiveHigh Input,Pin 7 GPIO4 ActiveHigh Input,Pin 4 GPIO1 ActiveHigh Input [0xB1552DAD957D00000000000000] to RAM Wrote SEQ_CONFIG [MFR 38,Rail #1] Rail On Dep: | GPI On Dep: | Rail Off Dep: | GPI Off Dep: | Fault Dep: Rail #2,3,4,5,6,7,8,9,10 | Enable: Unassigned; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely [0x5400000000000000000003FE] to RAM Wrote SEQ_CONFIG [MFR 38,Rail #2] Rail On Dep: Rail #1,6,7 | GPI On Dep: | Rail Off Dep: Rail #5 | GPI Off Dep: | Fault Dep: Rail #3,4,5,6,7,8,10 | Enable: Pin 16 FPWM7_GPIO11 ActiveHigh ActivelyDrivenOutput; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely [0x3600000000000061001002FC] to RAM Wrote SEQ_CONFIG [MFR 38,Rail #3] Rail On Dep: Rail #1,6,7 | GPI On Dep: | Rail Off Dep: Rail #5 | GPI Off Dep: | Fault Dep: Rail #2,4,5,6,7,8,10 | Enable: Pin 14 FPWM5_GPIO9 ActiveHigh ActivelyDrivenOutput; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely [0x2600000000000061001002FA] to RAM Saving device configuration (RAM) to flash memory ... Error Log: SEQ_CONFIG [Rail #4] write Rail On Dep: Rail #1,6,7 | GPI On Dep: | Rail Off Dep: Rail #5 | GPI Off Dep: | Fault Dep: Rail #2,3,5,6,7,8,10 | Enable: Pin 17 FPWM8_GPIO12 ActiveHigh ActivelyDrivenOutput; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely [0x3E00000000000061001002F6] on UCD9090 @ Address 65d error: NACK SEQ_CONFIG [Rail #5] write Rail On Dep: Rail #1,2,3,4,7,10 | GPI On Dep: V | Rail Off Dep: Rail #8 | GPI Off Dep: | Fault Dep: Rail #2,3,4,6,7,8,10 | Enable: Pin 24 GPIO15 ActiveHigh ActivelyDrivenOutput; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely [0xA60800000000024F008002EE] on UCD9090 @ Address 65d error: NACK SEQ_CONFIG [Rail #6] write Rail On Dep: Rail #1,7 | GPI On Dep: | Rail Off Dep: Rail #2,3,4 | GPI Off Dep: | Fault Dep: Rail #2,3,4,5,7,8,10 | Enable: Pin 13 FPWM4_GPIO8 ActiveHigh ActivelyDrivenOutput; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely [0x1E00000000000041000E02DE] on UCD9090 @ Address 65d error: NACK SEQ_CONFIG [Rail #7] write Rail On Dep: Rail #1,10 | GPI On Dep: V | Rail Off Dep: Rail #4,5,6 | GPI Off Dep: | Fault Dep: Rail #2,3,4,5,6,8,10 | Enable: Pin 12 FPWM3_GPIO7 ActiveHigh ActivelyDrivenOutput; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely [0x1608000000000201003802BE] on UCD9090 @ Address 65d error: NACK SEQ_CONFIG [Rail #8] write Rail On Dep: Rail #1,5,7 | GPI On Dep: V | Rail Off Dep: Rail #9 | GPI Off Dep: | Fault Dep: Rail #2,3,4,5,6,7,10 | Enable: Pin 11 FPWM2_GPIO6 ActiveHigh ActivelyDrivenOutput; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely [0x0E080000000000510100027E] on UCD9090 @ Address 65d error: NACK SEQ_CONFIG [Rail #9] write Rail On Dep: | GPI On Dep: | Rail Off Dep: | GPI Off Dep: | Fault Dep: Rail #1,2,3,4,5,6,7,8,10 | Enable: Unassigned; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely [0x0400000000000000000002FF] on UCD9090 @ Address 65d error: NACK SEQ_CONFIG [Rail #10] write Rail On Dep: Rail #1 | GPI On Dep: | Rail Off Dep: Rail #4,5,7 | GPI Off Dep: | Fault Dep: Rail #2,3,4,5,6,7,8 | Enable: Pin 10 FPWM1_GPIO5 ActiveHigh ActivelyDrivenOutput; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely [0x0600000000000001005800FE] on UCD9090 @ Address 65d error: NACK GPO_CONFIG_INDEX write GPO Index 0; [0x00] on UCD9090 @ Address 65d error: NACK GPO_CONFIG_INDEX write GPO Index 1; [0x01] on UCD9090 @ Address 65d error: NACK GPO_CONFIG_INDEX write GPO Index 2; [0x02] on UCD9090 @ Address 65d error: NACK GPO_CONFIG_INDEX write GPO Index 3; [0x03] on UCD9090 @ Address 65d error: NACK GPO_CONFIG_INDEX write GPO Index 4; [0x04] on UCD9090 @ Address 65d error: NACK GPO_CONFIG_INDEX write GPO Index 5; [0x05] on UCD9090 @ Address 65d error: NACK GPO_CONFIG_INDEX write GPO Index 6; [0x06] on UCD9090 @ Address 65d error: NACK GPO_CONFIG_INDEX write GPO Index 7; [0x07] on UCD9090 @ Address 65d error: NACK GPO_CONFIG_INDEX write GPO Index 8; [0x08] on UCD9090 @ Address 65d error: NACK GPO_CONFIG_10 write Unassigned; No Mask [0x000000000000000000000000000000000000000000] on UCD9090 @ Address 65d error: NACK PWM_SELECT write 0 [0x00] on UCD9090 @ Address 65d error: NACK PWM_SELECT write 1 [0x01] on UCD9090 @ Address 65d error: NACK PWM_SELECT write 2 [0x02] on UCD9090 @ Address 65d error: NACK PWM_SELECT write 3 [0x03] on UCD9090 @ Address 65d error: NACK PWM_SELECT write 4 [0x04] on UCD9090 @ Address 65d error: NACK PWM_SELECT write 5 [0x05] on UCD9090 @ Address 65d error: NACK PWM_SELECT write 6 [0x06] on UCD9090 @ Address 65d error: NACK PWM_SELECT write 7 [0x07] on UCD9090 @ Address 65d error: NACK PWM_SELECT write 8 [0x08] on UCD9090 @ Address 65d error: NACK PWM_CONFIG_9 write Pin_ID = 9; Duty Cycle: 0.0 %; Frequency: 0 Hz; Phase: 0.0 deg [0x8800000000000000] on UCD9090 @ Address 65d error: NACK MARGIN_CONFIG [Rail #1] write Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 10 FPWM1_GPIO5 [0x00] on UCD9090 @ Address 65d error: NACK MARGIN_CONFIG [Rail #2] write Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 10 FPWM1_GPIO5 [0x00] on UCD9090 @ Address 65d error: NACK MARGIN_CONFIG [Rail #3] write Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 10 FPWM1_GPIO5 [0x00] on UCD9090 @ Address 65d error: NACK MARGIN_CONFIG [Rail #4] write Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 10 FPWM1_GPIO5 [0x00] on UCD9090 @ Address 65d error: NACK MARGIN_CONFIG [Rail #5] write Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 10 FPWM1_GPIO5 [0x00] on UCD9090 @ Address 65d error: NACK MARGIN_CONFIG [Rail #6] write Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 10 FPWM1_GPIO5 [0x00] on UCD9090 @ Address 65d error: NACK MARGIN_CONFIG [Rail #7] write Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 10 FPWM1_GPIO5 [0x00] on UCD9090 @ Address 65d error: NACK MARGIN_CONFIG [Rail #8] write Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 10 FPWM1_GPIO5 [0x00] on UCD9090 @ Address 65d error: NACK MARGIN_CONFIG [Rail #9] write Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 10 FPWM1_GPIO5 [0x00] on UCD9090 @ Address 65d error: NACK MARGIN_CONFIG [Rail #10] write Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 10 FPWM1_GPIO5 [0x00] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 0 [0x00] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 1 [0x01] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 2 [0x02] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 3 [0x03] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 4 [0x04] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 5 [0x05] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 6 [0x06] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 7 [0x07] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 8 [0x08] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 9 [0x09] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 10 [0x0A] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 11 [0x0B] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 12 [0x0C] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 13 [0x0D] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 14 [0x0E] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 15 [0x0F] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 16 [0x10] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 17 [0x11] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 18 [0x12] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 19 [0x13] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 20 [0x14] on UCD9090 @ Address 65d error: NACK GPIO_SELECT write 21 [0x15] on UCD9090 @ Address 65d error: NACK GPIO_CONFIG_22 write Enable: False; Out_Enable: False; Out_Value: False; Status: True [0x08] on UCD9090 @ Address 65d error: NACK LOGGED_FAULT_DETAIL_ENABLES write Common: LOG_NOT_EMPTY,RESEQUENCE_ERROR,RESERVED4,RESERVED5,RESERVED6,RESERVED7; GPI: #1,2,3,4,5,6,7,8; Rail #1: VOUT_OV,VOUT_UV,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #2: VOUT_OV,VOUT_UV,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #3: VOUT_OV,VOUT_UV,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #4: VOUT_OV,VOUT_UV,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #5: VOUT_OV,VOUT_UV,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #6: VOUT_OV,VOUT_UV,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #7: VOUT_OV,VOUT_UV,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #8: VOUT_OV,VOUT_UV,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #9: VOUT_OV,VOUT_UV,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #10: VOUT_OV,VOUT_UV,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT [0xF5FFC3C3C3C3C3C3C3C3C3C3] on UCD9090 @ Address 65d error: NACK MFR_DATE write YYMMDD [0x59594D4D4444] on UCD9090 @ Address 65d error: NACK MFR_ID write MFR_ID [0x4D46525F4944] on UCD9090 @ Address 65d error: NACK MFR_LOCATION write MFR_LOCATION [0x4D46525F4C4F434154494F4E] on UCD9090 @ Address 65d error: NACK MFR_MODEL write MFR_MODEL [0x4D46525F4D4F44454C] on UCD9090 @ Address 65d error: NACK MFR_REVISION write MFR_REVISION [0x4D46525F5245564953494F4E] on UCD9090 @ Address 65d error: NACK MFR_SERIAL write 000000 [0x303030303030] on UCD9090 @ Address 65d error: NACK MISC_CONFIG write Time Between Resequences: 1024 msec; Resequence Abort: no; Max Resequences: 2; FIFO Mode: All; Brownout Enable: yes [0x1790] on UCD9090 @ Address 65d error: NACK PIN_SELECTED_RAIL_STATES write State 0: Enabled=No, Turn Off Mode=ImmediateOff, Rails States= ; State 1: Enabled=No, Turn Off Mode=ImmediateOff, Rails States= ; State 2: Enabled=No, Turn Off Mode=ImmediateOff, Rails States= ; State 3: Enabled=No, Turn Off Mode=ImmediateOff, Rails States= ; State 4: Enabled=No, Turn Off Mode=ImmediateOff, Rails States= ; State 5: Enabled=No, Turn Off Mode=ImmediateOff, Rails States= ; State 6: Enabled=No, Turn Off Mode=ImmediateOff, Rails States= ; State 7: Enabled=No, Turn Off Mode=ImmediateOff, Rails States= [0x000000000000000000000000000000000000] on UCD9090 @ Address 65d error: NACK RESET_COUNT write 0 [0x0000] on UCD9090 @ Address 65d error: NACK RUN_TIME_CLOCK_TRIM write -0.66 % [0xB560] on UCD9090 @ Address 65d error: NACK SECURITY_BIT_MASK write No commands write protected [0x0000000000000000000000000000000000000000000000000000000000000000] on UCD9090 @ Address 65d error: NACK SYSTEM_RESET_CONFIG write Disabled [0x000000000000000000] on UCD9090 @ Address 65d error: NACK SYSTEM_WATCHDOG_CONFIG write Disabled [0x00000000] on UCD9090 @ Address 65d error: NACK ON_OFF_CONFIG [Rail #1] write Mode: Always Converting [0x00] on UCD9090 @ Address 65d error: NACK FAULT_RESPONSES [Rail #1] write Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| IOUT_OC: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| IOUT_UC: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| OT: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A [0x000000000000000000] on UCD9090 @ Address 65d error: NACK IOUT_CAL_GAIN [Rail #1] write 10.0 mΩ [0xD280] on UCD9090 @ Address 65d error: NACK IOUT_CAL_OFFSET [Rail #1] write 0.000000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_OC_FAULT_LIMIT [Rail #1] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_OC_WARN_LIMIT [Rail #1] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_UC_FAULT_LIMIT [Rail #1] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK OT_FAULT_LIMIT [Rail #1] write 255 °C [0xF3FC] on UCD9090 @ Address 65d error: NACK OT_WARN_LIMIT [Rail #1] write 255 °C [0xF3FC] on UCD9090 @ Address 65d error: NACK POWER_GOOD_OFF [Rail #1] write 4.250 V [0x4400] on UCD9090 @ Address 65d error: NACK POWER_GOOD_ON [Rail #1] write 4.500 V [0x4800] on UCD9090 @ Address 65d error: NACK TEMPERATURE_CAL_GAIN [Rail #1] write 100.0 °C/V [0xEB20] on UCD9090 @ Address 65d error: NACK TEMPERATURE_CAL_OFFSET [Rail #1] write 0.00 °C [0x8000] on UCD9090 @ Address 65d error: NACK TOFF_DELAY [Rail #1] write 0.0 ms [0x8000] on UCD9090 @ Address 65d error: NACK TOFF_MAX_WARN_LIMIT [Rail #1] write [0x7FFF] on UCD9090 @ Address 65d error: NACK TON_DELAY [Rail #1] write 0.0 ms [0x8000] on UCD9090 @ Address 65d error: NACK TON_MAX_FAULT_LIMIT [Rail #1] write [0x8000] on UCD9090 @ Address 65d error: NACK VOUT_CAL_MONITOR [Rail #1] write 0.000 V [0x0000] on UCD9090 @ Address 65d error: NACK VOUT_COMMAND [Rail #1] write 5.000 V [0x5000] on UCD9090 @ Address 65d error: NACK VOUT_MARGIN_HIGH [Rail #1] write 5.500 V [0x5800] on UCD9090 @ Address 65d error: NACK VOUT_MARGIN_LOW [Rail #1] write 4.500 V [0x4800] on UCD9090 @ Address 65d error: NACK VOUT_OV_FAULT_LIMIT [Rail #1] write 5.750 V [0x5C00] on UCD9090 @ Address 65d error: NACK VOUT_OV_WARN_LIMIT [Rail #1] write 5.500 V [0x5800] on UCD9090 @ Address 65d error: NACK VOUT_SCALE_MONITOR [Rail #1] write 0.435 [0xAB7B] on UCD9090 @ Address 65d error: NACK VOUT_UV_FAULT_LIMIT [Rail #1] write 4.250 V [0x4400] on UCD9090 @ Address 65d error: NACK VOUT_UV_WARN_LIMIT [Rail #1] write 4.500 V [0x4800] on UCD9090 @ Address 65d error: NACK OPERATION [Rail #2] write Unit: ImmediateOff; Margin: None [0x00] on UCD9090 @ Address 65d error: NACK ON_OFF_CONFIG [Rail #2] write Mode: Always Converting [0x00] on UCD9090 @ Address 65d error: NACK FAULT_RESPONSES [Rail #2] write Retry Time: 960 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Shut down immediately; Restart: Do not restart| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Shut down immediately; Restart: Do not restart| IOUT_OC: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| IOUT_UC: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| OT: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Shut down with delay; Restart: Do not restart [0x8080000000A08F0000] on UCD9090 @ Address 65d error: NACK IOUT_CAL_GAIN [Rail #2] write 10.0 mΩ [0xD280] on UCD9090 @ Address 65d error: NACK IOUT_CAL_OFFSET [Rail #2] write 0.000000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_OC_FAULT_LIMIT [Rail #2] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_OC_WARN_LIMIT [Rail #2] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_UC_FAULT_LIMIT [Rail #2] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK OT_FAULT_LIMIT [Rail #2] write 255 °C [0xF3FC] on UCD9090 @ Address 65d error: NACK OT_WARN_LIMIT [Rail #2] write 255 °C [0xF3FC] on UCD9090 @ Address 65d error: NACK POWER_GOOD_OFF [Rail #2] write 2.805 V [0x2CE1] on UCD9090 @ Address 65d error: NACK POWER_GOOD_ON [Rail #2] write 2.970 V [0x2F85] on UCD9090 @ Address 65d error: NACK TEMPERATURE_CAL_GAIN [Rail #2] write 100.0 °C/V [0xEB20] on UCD9090 @ Address 65d error: NACK TEMPERATURE_CAL_OFFSET [Rail #2] write 0.00 °C [0x8000] on UCD9090 @ Address 65d error: NACK TOFF_DELAY [Rail #2] write 0.0 ms [0x8000] on UCD9090 @ Address 65d error: NACK TOFF_MAX_WARN_LIMIT [Rail #2] write [0x7FFF] on UCD9090 @ Address 65d error: NACK TON_DELAY [Rail #2] write 2.0 ms [0xBBFF] on UCD9090 @ Address 65d error: NACK TON_MAX_FAULT_LIMIT [Rail #2] write 100.0 ms [0xEB20] on UCD9090 @ Address 65d error: NACK VOUT_CAL_MONITOR [Rail #2] write 0.000 V [0x0000] on UCD9090 @ Address 65d error: NACK VOUT_COMMAND [Rail #2] write 3.300 V [0x34CD] on UCD9090 @ Address 65d error: NACK VOUT_MARGIN_HIGH [Rail #2] write 3.465 V [0x3771] on UCD9090 @ Address 65d error: NACK VOUT_MARGIN_LOW [Rail #2] write 3.135 V [0x3229] on UCD9090 @ Address 65d error: NACK VOUT_OV_FAULT_LIMIT [Rail #2] write 3.795 V [0x3CB8] on UCD9090 @ Address 65d error: NACK VOUT_OV_WARN_LIMIT [Rail #2] write 3.630 V [0x3A14] on UCD9090 @ Address 65d error: NACK VOUT_SCALE_MONITOR [Rail #2] write 0.680 [0xB2B8] on UCD9090 @ Address 65d error: NACK VOUT_UV_FAULT_LIMIT [Rail #2] write 2.805 V [0x2CE1] on UCD9090 @ Address 65d error: NACK VOUT_UV_WARN_LIMIT [Rail #2] write 2.970 V [0x2F85] on UCD9090 @ Address 65d error: NACK OPERATION [Rail #3] write Unit: ImmediateOff; Margin: None [0x00] on UCD9090 @ Address 65d error: NACK ON_OFF_CONFIG [Rail #3] write Mode: Always Converting [0x00] on UCD9090 @ Address 65d error: NACK FAULT_RESPONSES [Rail #3] write Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Shut down immediately; Restart: Do not restart| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Shut down immediately; Restart: Do not restart| IOUT_OC: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| IOUT_UC: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| OT: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Shut down with delay; Restart: Do not restart [0x8080000000A0000000] on UCD9090 @ Address 65d error: NACK IOUT_CAL_GAIN [Rail #3] write 10.0 mΩ [0xD280] on UCD9090 @ Address 65d error: NACK IOUT_CAL_OFFSET [Rail #3] write 0.000000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_OC_FAULT_LIMIT [Rail #3] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_OC_WARN_LIMIT [Rail #3] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_UC_FAULT_LIMIT [Rail #3] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK OT_FAULT_LIMIT [Rail #3] write 255 °C [0xF3FC] on UCD9090 @ Address 65d error: NACK OT_WARN_LIMIT [Rail #3] write 255 °C [0xF3FC] on UCD9090 @ Address 65d error: NACK POWER_GOOD_OFF [Rail #3] write 2.125 V [0x4400] on UCD9090 @ Address 65d error: NACK POWER_GOOD_ON [Rail #3] write 2.250 V [0x4800] on UCD9090 @ Address 65d error: NACK TEMPERATURE_CAL_GAIN [Rail #3] write 100.0 °C/V [0xEB20] on UCD9090 @ Address 65d error: NACK TEMPERATURE_CAL_OFFSET [Rail #3] write 0.00 °C [0x8000] on UCD9090 @ Address 65d error: NACK TOFF_DELAY [Rail #3] write 0.0 ms [0x8000] on UCD9090 @ Address 65d error: NACK TOFF_MAX_WARN_LIMIT [Rail #3] write [0x7FFF] on UCD9090 @ Address 65d error: NACK TON_DELAY [Rail #3] write 2.0 ms [0xBBFF] on UCD9090 @ Address 65d error: NACK TON_MAX_FAULT_LIMIT [Rail #3] write 100.0 ms [0xEB20] on UCD9090 @ Address 65d error: NACK VOUT_CAL_MONITOR [Rail #3] write 0.000 V [0x0000] on UCD9090 @ Address 65d error: NACK VOUT_COMMAND [Rail #3] write 2.500 V [0x5000] on UCD9090 @ Address 65d error: NACK VOUT_MARGIN_HIGH [Rail #3] write 2.625 V [0x5400] on UCD9090 @ Address 65d error: NACK VOUT_MARGIN_LOW [Rail #3] write 2.375 V [0x4C00] on UCD9090 @ Address 65d error: NACK VOUT_OV_FAULT_LIMIT [Rail #3] write 2.875 V [0x5C00] on UCD9090 @ Address 65d error: NACK VOUT_OV_WARN_LIMIT [Rail #3] write 2.750 V [0x5800] on UCD9090 @ Address 65d error: NACK VOUT_SCALE_MONITOR [Rail #3] write 0.752 [0xB302] on UCD9090 @ Address 65d error: NACK VOUT_UV_FAULT_LIMIT [Rail #3] write 2.125 V [0x4400] on UCD9090 @ Address 65d error: NACK VOUT_UV_WARN_LIMIT [Rail #3] write 2.250 V [0x4800] on UCD9090 @ Address 65d error: NACK OPERATION [Rail #4] write Unit: ImmediateOff; Margin: None [0x00] on UCD9090 @ Address 65d error: NACK ON_OFF_CONFIG [Rail #4] write Mode: Always Converting [0x00] on UCD9090 @ Address 65d error: NACK FAULT_RESPONSES [Rail #4] write Retry Time: 960 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Shut down immediately; Restart: Do not restart| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Shut down immediately; Restart: Do not restart| IOUT_OC: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| IOUT_UC: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| OT: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Shut down with delay; Restart: Do not restart [0x8080000000A08F0000] on UCD9090 @ Address 65d error: NACK IOUT_CAL_GAIN [Rail #4] write 10.0 mΩ [0xD280] on UCD9090 @ Address 65d error: NACK IOUT_CAL_OFFSET [Rail #4] write 0.000000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_OC_FAULT_LIMIT [Rail #4] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_OC_WARN_LIMIT [Rail #4] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_UC_FAULT_LIMIT [Rail #4] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK OT_FAULT_LIMIT [Rail #4] write 255 °C [0xF3FC] on UCD9090 @ Address 65d error: NACK OT_WARN_LIMIT [Rail #4] write 255 °C [0xF3FC] on UCD9090 @ Address 65d error: NACK POWER_GOOD_OFF [Rail #4] write 1.530 V [0x30F6] on UCD9090 @ Address 65d error: NACK POWER_GOOD_ON [Rail #4] write 1.620 V [0x33D7] on UCD9090 @ Address 65d error: NACK TEMPERATURE_CAL_GAIN [Rail #4] write 100.0 °C/V [0xEB20] on UCD9090 @ Address 65d error: NACK TEMPERATURE_CAL_OFFSET [Rail #4] write 0.00 °C [0x8000] on UCD9090 @ Address 65d error: NACK TOFF_DELAY [Rail #4] write 0.0 ms [0x8000] on UCD9090 @ Address 65d error: NACK TOFF_MAX_WARN_LIMIT [Rail #4] write [0x7FFF] on UCD9090 @ Address 65d error: NACK TON_DELAY [Rail #4] write 2.0 ms [0xBBFF] on UCD9090 @ Address 65d error: NACK TON_MAX_FAULT_LIMIT [Rail #4] write 100.0 ms [0xEB20] on UCD9090 @ Address 65d error: NACK VOUT_CAL_MONITOR [Rail #4] write 0.000 V [0x0000] on UCD9090 @ Address 65d error: NACK VOUT_COMMAND [Rail #4] write 1.800 V [0x399A] on UCD9090 @ Address 65d error: NACK VOUT_MARGIN_HIGH [Rail #4] write 1.890 V [0x3C7B] on UCD9090 @ Address 65d error: NACK VOUT_MARGIN_LOW [Rail #4] write 1.710 V [0x36B8] on UCD9090 @ Address 65d error: NACK VOUT_OV_FAULT_LIMIT [Rail #4] write 2.070 V [0x423D] on UCD9090 @ Address 65d error: NACK VOUT_OV_WARN_LIMIT [Rail #4] write 1.980 V [0x3F5C] on UCD9090 @ Address 65d error: NACK VOUT_SCALE_MONITOR [Rail #4] write 1.000 [0xBA00] on UCD9090 @ Address 65d error: NACK VOUT_UV_FAULT_LIMIT [Rail #4] write 1.530 V [0x30F6] on UCD9090 @ Address 65d error: NACK VOUT_UV_WARN_LIMIT [Rail #4] write 1.620 V [0x33D7] on UCD9090 @ Address 65d error: NACK OPERATION [Rail #5] write Unit: ImmediateOff; Margin: None [0x00] on UCD9090 @ Address 65d error: NACK ON_OFF_CONFIG [Rail #5] write Mode: Always Converting [0x00] on UCD9090 @ Address 65d error: NACK FAULT_RESPONSES [Rail #5] write Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Shut down immediately; Restart: Do not restart| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Shut down immediately; Restart: Do not restart| IOUT_OC: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| IOUT_UC: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| OT: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Shut down with delay; Restart: Do not restart [0x8080000000A0000000] on UCD9090 @ Address 65d error: NACK IOUT_CAL_GAIN [Rail #5] write 10.0 mΩ [0xD280] on UCD9090 @ Address 65d error: NACK IOUT_CAL_OFFSET [Rail #5] write 0.000000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_OC_FAULT_LIMIT [Rail #5] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_OC_WARN_LIMIT [Rail #5] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_UC_FAULT_LIMIT [Rail #5] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK OT_FAULT_LIMIT [Rail #5] write 255 °C [0xF3FC] on UCD9090 @ Address 65d error: NACK OT_WARN_LIMIT [Rail #5] write 255 °C [0xF3FC] on UCD9090 @ Address 65d error: NACK POWER_GOOD_OFF [Rail #5] write 1.275 V [0x28CD] on UCD9090 @ Address 65d error: NACK POWER_GOOD_ON [Rail #5] write 1.350 V [0x2B33] on UCD9090 @ Address 65d error: NACK TEMPERATURE_CAL_GAIN [Rail #5] write 100.0 °C/V [0xEB20] on UCD9090 @ Address 65d error: NACK TEMPERATURE_CAL_OFFSET [Rail #5] write 0.00 °C [0x8000] on UCD9090 @ Address 65d error: NACK TOFF_DELAY [Rail #5] write 0.0 ms [0x8000] on UCD9090 @ Address 65d error: NACK TOFF_MAX_WARN_LIMIT [Rail #5] write [0x7FFF] on UCD9090 @ Address 65d error: NACK TON_DELAY [Rail #5] write 2.0 ms [0xBBFF] on UCD9090 @ Address 65d error: NACK TON_MAX_FAULT_LIMIT [Rail #5] write 100.0 ms [0xEB20] on UCD9090 @ Address 65d error: NACK VOUT_CAL_MONITOR [Rail #5] write 0.000 V [0x0000] on UCD9090 @ Address 65d error: NACK VOUT_COMMAND [Rail #5] write 1.500 V [0x3000] on UCD9090 @ Address 65d error: NACK VOUT_MARGIN_HIGH [Rail #5] write 1.575 V [0x3266] on UCD9090 @ Address 65d error: NACK VOUT_MARGIN_LOW [Rail #5] write 1.425 V [0x2D9A] on UCD9090 @ Address 65d error: NACK VOUT_OV_FAULT_LIMIT [Rail #5] write 1.725 V [0x3733] on UCD9090 @ Address 65d error: NACK VOUT_OV_WARN_LIMIT [Rail #5] write 1.650 V [0x34CD] on UCD9090 @ Address 65d error: NACK VOUT_SCALE_MONITOR [Rail #5] write 1.000 [0xBA00] on UCD9090 @ Address 65d error: NACK VOUT_UV_FAULT_LIMIT [Rail #5] write 1.275 V [0x28CD] on UCD9090 @ Address 65d error: NACK VOUT_UV_WARN_LIMIT [Rail #5] write 1.350 V [0x2B33] on UCD9090 @ Address 65d error: NACK OPERATION [Rail #6] write Unit: ImmediateOff; Margin: None [0x00] on UCD9090 @ Address 65d error: NACK ON_OFF_CONFIG [Rail #6] write Mode: Always Converting [0x00] on UCD9090 @ Address 65d error: NACK FAULT_RESPONSES [Rail #6] write Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Shut down immediately; Restart: Do not restart| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Shut down immediately; Restart: Do not restart| IOUT_OC: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| IOUT_UC: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| OT: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Shut down with delay; Restart: Do not restart [0x8080000000A0000000] on UCD9090 @ Address 65d error: NACK IOUT_CAL_GAIN [Rail #6] write 10.0 mΩ [0xD280] on UCD9090 @ Address 65d error: NACK IOUT_CAL_OFFSET [Rail #6] write 0.000000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_OC_FAULT_LIMIT [Rail #6] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_OC_WARN_LIMIT [Rail #6] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_UC_FAULT_LIMIT [Rail #6] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK OT_FAULT_LIMIT [Rail #6] write 255 °C [0xF3FC] on UCD9090 @ Address 65d error: NACK OT_WARN_LIMIT [Rail #6] write 255 °C [0xF3FC] on UCD9090 @ Address 65d error: NACK POWER_GOOD_OFF [Rail #6] write 1.020 V [0x4148] on UCD9090 @ Address 65d error: NACK POWER_GOOD_ON [Rail #6] write 1.080 V [0x451F] on UCD9090 @ Address 65d error: NACK TEMPERATURE_CAL_GAIN [Rail #6] write 100.0 °C/V [0xEB20] on UCD9090 @ Address 65d error: NACK TEMPERATURE_CAL_OFFSET [Rail #6] write 0.00 °C [0x8000] on UCD9090 @ Address 65d error: NACK TOFF_DELAY [Rail #6] write 0.0 ms [0x8000] on UCD9090 @ Address 65d error: NACK TOFF_MAX_WARN_LIMIT [Rail #6] write [0x7FFF] on UCD9090 @ Address 65d error: NACK TON_DELAY [Rail #6] write 2.0 ms [0xBBFF] on UCD9090 @ Address 65d error: NACK TON_MAX_FAULT_LIMIT [Rail #6] write 100.0 ms [0xEB20] on UCD9090 @ Address 65d error: NACK VOUT_CAL_MONITOR [Rail #6] write 0.000 V [0x0000] on UCD9090 @ Address 65d error: NACK VOUT_COMMAND [Rail #6] write 1.200 V [0x4CCD] on UCD9090 @ Address 65d error: NACK VOUT_MARGIN_HIGH [Rail #6] write 1.260 V [0x50A4] on UCD9090 @ Address 65d error: NACK VOUT_MARGIN_LOW [Rail #6] write 1.140 V [0x48F6] on UCD9090 @ Address 65d error: NACK VOUT_OV_FAULT_LIMIT [Rail #6] write 1.380 V [0x5852] on UCD9090 @ Address 65d error: NACK VOUT_OV_WARN_LIMIT [Rail #6] write 1.320 V [0x547B] on UCD9090 @ Address 65d error: NACK VOUT_SCALE_MONITOR [Rail #6] write 1.000 [0xBA00] on UCD9090 @ Address 65d error: NACK VOUT_UV_FAULT_LIMIT [Rail #6] write 1.020 V [0x4148] on UCD9090 @ Address 65d error: NACK VOUT_UV_WARN_LIMIT [Rail #6] write 1.080 V [0x451F] on UCD9090 @ Address 65d error: NACK OPERATION [Rail #7] write Unit: ImmediateOff; Margin: None [0x00] on UCD9090 @ Address 65d error: NACK ON_OFF_CONFIG [Rail #7] write Mode: Always Converting [0x00] on UCD9090 @ Address 65d error: NACK FAULT_RESPONSES [Rail #7] write Retry Time: 960 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Shut down immediately; Restart: Do not restart| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Shut down immediately; Restart: Do not restart| IOUT_OC: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| IOUT_UC: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| OT: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Shut down with delay; Restart: Do not restart [0x8080000000A08F0000] on UCD9090 @ Address 65d error: NACK IOUT_CAL_GAIN [Rail #7] write 10.0 mΩ [0xD280] on UCD9090 @ Address 65d error: NACK IOUT_CAL_OFFSET [Rail #7] write 0.000000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_OC_FAULT_LIMIT [Rail #7] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_OC_WARN_LIMIT [Rail #7] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_UC_FAULT_LIMIT [Rail #7] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK OT_FAULT_LIMIT [Rail #7] write 255 °C [0xF3FC] on UCD9090 @ Address 65d error: NACK OT_WARN_LIMIT [Rail #7] write 255 °C [0xF3FC] on UCD9090 @ Address 65d error: NACK POWER_GOOD_OFF [Rail #7] write 0.850 V [0x3666] on UCD9090 @ Address 65d error: NACK POWER_GOOD_ON [Rail #7] write 0.900 V [0x399A] on UCD9090 @ Address 65d error: NACK TEMPERATURE_CAL_GAIN [Rail #7] write 100.0 °C/V [0xEB20] on UCD9090 @ Address 65d error: NACK TEMPERATURE_CAL_OFFSET [Rail #7] write 0.00 °C [0x8000] on UCD9090 @ Address 65d error: NACK TOFF_DELAY [Rail #7] write 0.0 ms [0x8000] on UCD9090 @ Address 65d error: NACK TOFF_MAX_WARN_LIMIT [Rail #7] write [0x7FFF] on UCD9090 @ Address 65d error: NACK TON_DELAY [Rail #7] write 2.0 ms [0xBBFF] on UCD9090 @ Address 65d error: NACK TON_MAX_FAULT_LIMIT [Rail #7] write 100.0 ms [0xEB20] on UCD9090 @ Address 65d error: NACK VOUT_CAL_MONITOR [Rail #7] write 0.000 V [0x0000] on UCD9090 @ Address 65d error: NACK VOUT_COMMAND [Rail #7] write 1.000 V [0x4000] on UCD9090 @ Address 65d error: NACK VOUT_MARGIN_HIGH [Rail #7] write 1.050 V [0x4333] on UCD9090 @ Address 65d error: NACK VOUT_MARGIN_LOW [Rail #7] write 0.950 V [0x3CCD] on UCD9090 @ Address 65d error: NACK VOUT_OV_FAULT_LIMIT [Rail #7] write 1.150 V [0x499A] on UCD9090 @ Address 65d error: NACK VOUT_OV_WARN_LIMIT [Rail #7] write 1.100 V [0x4666] on UCD9090 @ Address 65d error: NACK VOUT_SCALE_MONITOR [Rail #7] write 1.000 [0xBA00] on UCD9090 @ Address 65d error: NACK VOUT_UV_FAULT_LIMIT [Rail #7] write 0.850 V [0x3666] on UCD9090 @ Address 65d error: NACK VOUT_UV_WARN_LIMIT [Rail #7] write 0.900 V [0x399A] on UCD9090 @ Address 65d error: NACK OPERATION [Rail #8] write Unit: ImmediateOff; Margin: None [0x00] on UCD9090 @ Address 65d error: NACK ON_OFF_CONFIG [Rail #8] write Mode: Always Converting [0x00] on UCD9090 @ Address 65d error: NACK FAULT_RESPONSES [Rail #8] write Retry Time: 96 msec| Max Volt Glitch Time: 100.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Enabled; Response: Shut down immediately; Restart: Do not restart| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Shut down immediately; Restart: Do not restart| IOUT_OC: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| IOUT_UC: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| OT: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Shut down with delay; Restart: Do not restart [0xC080000000A04CFA00] on UCD9090 @ Address 65d error: NACK IOUT_CAL_GAIN [Rail #8] write 10.0 mΩ [0xD280] on UCD9090 @ Address 65d error: NACK IOUT_CAL_OFFSET [Rail #8] write 0.000000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_OC_FAULT_LIMIT [Rail #8] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_OC_WARN_LIMIT [Rail #8] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_UC_FAULT_LIMIT [Rail #8] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK OT_FAULT_LIMIT [Rail #8] write 255 °C [0xF3FC] on UCD9090 @ Address 65d error: NACK OT_WARN_LIMIT [Rail #8] write 255 °C [0xF3FC] on UCD9090 @ Address 65d error: NACK POWER_GOOD_OFF [Rail #8] write 0.638 V [0x28D5] on UCD9090 @ Address 65d error: NACK POWER_GOOD_ON [Rail #8] write 0.675 V [0x2B33] on UCD9090 @ Address 65d error: NACK TEMPERATURE_CAL_GAIN [Rail #8] write 100.0 °C/V [0xEB20] on UCD9090 @ Address 65d error: NACK TEMPERATURE_CAL_OFFSET [Rail #8] write 0.00 °C [0x8000] on UCD9090 @ Address 65d error: NACK TOFF_DELAY [Rail #8] write 0.0 ms [0x8000] on UCD9090 @ Address 65d error: NACK TOFF_MAX_WARN_LIMIT [Rail #8] write [0x7FFF] on UCD9090 @ Address 65d error: NACK TON_DELAY [Rail #8] write 2.0 ms [0xBBFF] on UCD9090 @ Address 65d error: NACK TON_MAX_FAULT_LIMIT [Rail #8] write 99.9 ms [0xEB1F] on UCD9090 @ Address 65d error: NACK VOUT_CAL_MONITOR [Rail #8] write 0.000 V [0x0000] on UCD9090 @ Address 65d error: NACK VOUT_COMMAND [Rail #8] write 0.750 V [0x3000] on UCD9090 @ Address 65d error: NACK VOUT_MARGIN_HIGH [Rail #8] write 0.788 V [0x326F] on UCD9090 @ Address 65d error: NACK VOUT_MARGIN_LOW [Rail #8] write 0.712 V [0x2D91] on UCD9090 @ Address 65d error: NACK VOUT_OV_FAULT_LIMIT [Rail #8] write 0.862 V [0x372B] on UCD9090 @ Address 65d error: NACK VOUT_OV_WARN_LIMIT [Rail #8] write 0.825 V [0x34CD] on UCD9090 @ Address 65d error: NACK VOUT_SCALE_MONITOR [Rail #8] write 1.000 [0xBA00] on UCD9090 @ Address 65d error: NACK VOUT_UV_FAULT_LIMIT [Rail #8] write 0.638 V [0x28D5] on UCD9090 @ Address 65d error: NACK VOUT_UV_WARN_LIMIT [Rail #8] write 0.675 V [0x2B33] on UCD9090 @ Address 65d error: NACK OPERATION [Rail #9] write Unit: ImmediateOff; Margin: None [0x00] on UCD9090 @ Address 65d error: NACK ON_OFF_CONFIG [Rail #9] write Mode: Always Converting [0x00] on UCD9090 @ Address 65d error: NACK FAULT_RESPONSES [Rail #9] write Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| IOUT_OC: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| IOUT_UC: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| OT: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A [0x000000000000000000] on UCD9090 @ Address 65d error: NACK IOUT_CAL_GAIN [Rail #9] write 10.0 mΩ [0xD280] on UCD9090 @ Address 65d error: NACK IOUT_CAL_OFFSET [Rail #9] write 0.000000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_OC_FAULT_LIMIT [Rail #9] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_OC_WARN_LIMIT [Rail #9] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_UC_FAULT_LIMIT [Rail #9] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK OT_FAULT_LIMIT [Rail #9] write 255 °C [0xF3FC] on UCD9090 @ Address 65d error: NACK OT_WARN_LIMIT [Rail #9] write 255 °C [0xF3FC] on UCD9090 @ Address 65d error: NACK POWER_GOOD_OFF [Rail #9] write 10.200 V [0x28CD] on UCD9090 @ Address 65d error: NACK POWER_GOOD_ON [Rail #9] write 10.800 V [0x2B33] on UCD9090 @ Address 65d error: NACK TEMPERATURE_CAL_GAIN [Rail #9] write 100.0 °C/V [0xEB20] on UCD9090 @ Address 65d error: NACK TEMPERATURE_CAL_OFFSET [Rail #9] write 0.00 °C [0x8000] on UCD9090 @ Address 65d error: NACK TOFF_DELAY [Rail #9] write 0.0 ms [0x8000] on UCD9090 @ Address 65d error: NACK TOFF_MAX_WARN_LIMIT [Rail #9] write [0x7FFF] on UCD9090 @ Address 65d error: NACK TON_DELAY [Rail #9] write 0.0 ms [0x8000] on UCD9090 @ Address 65d error: NACK TON_MAX_FAULT_LIMIT [Rail #9] write [0x8000] on UCD9090 @ Address 65d error: NACK VOUT_CAL_MONITOR [Rail #9] write 0.000 V [0x0000] on UCD9090 @ Address 65d error: NACK VOUT_COMMAND [Rail #9] write 12.000 V [0x3000] on UCD9090 @ Address 65d error: NACK VOUT_MARGIN_HIGH [Rail #9] write 12.600 V [0x3266] on UCD9090 @ Address 65d error: NACK VOUT_MARGIN_LOW [Rail #9] write 11.400 V [0x2D9A] on UCD9090 @ Address 65d error: NACK VOUT_OV_FAULT_LIMIT [Rail #9] write 13.800 V [0x3733] on UCD9090 @ Address 65d error: NACK VOUT_OV_WARN_LIMIT [Rail #9] write 13.200 V [0x34CD] on UCD9090 @ Address 65d error: NACK VOUT_SCALE_MONITOR [Rail #9] write 0.162 [0xA298] on UCD9090 @ Address 65d error: NACK VOUT_UV_FAULT_LIMIT [Rail #9] write 10.200 V [0x28CD] on UCD9090 @ Address 65d error: NACK VOUT_UV_WARN_LIMIT [Rail #9] write 10.800 V [0x2B33] on UCD9090 @ Address 65d error: NACK OPERATION [Rail #10] write Unit: ImmediateOff; Margin: None [0x00] on UCD9090 @ Address 65d error: NACK ON_OFF_CONFIG [Rail #10] write Mode: Always Converting [0x00] on UCD9090 @ Address 65d error: NACK FAULT_RESPONSES [Rail #10] write Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| IOUT_OC: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| IOUT_UC: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| OT: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A [0x000000000000000000] on UCD9090 @ Address 65d error: NACK IOUT_CAL_GAIN [Rail #10] write 10.0 mΩ [0xD280] on UCD9090 @ Address 65d error: NACK IOUT_CAL_OFFSET [Rail #10] write 0.000000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_OC_FAULT_LIMIT [Rail #10] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_OC_WARN_LIMIT [Rail #10] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK IOUT_UC_FAULT_LIMIT [Rail #10] write 0.000 A [0x8000] on UCD9090 @ Address 65d error: NACK OT_FAULT_LIMIT [Rail #10] write 255 °C [0xF3FC] on UCD9090 @ Address 65d error: NACK OT_WARN_LIMIT [Rail #10] write 255 °C [0xF3FC] on UCD9090 @ Address 65d error: NACK POWER_GOOD_OFF [Rail #10] write 0.850 V [0x3666] on UCD9090 @ Address 65d error: NACK POWER_GOOD_ON [Rail #10] write 0.900 V [0x399A] on UCD9090 @ Address 65d error: NACK TEMPERATURE_CAL_GAIN [Rail #10] write 100.0 °C/V [0xEB20] on UCD9090 @ Address 65d error: NACK TEMPERATURE_CAL_OFFSET [Rail #10] write 0.00 °C [0x8000] on UCD9090 @ Address 65d error: NACK TOFF_DELAY [Rail #10] write 0.0 ms [0x8000] on UCD9090 @ Address 65d error: NACK TOFF_MAX_WARN_LIMIT [Rail #10] write [0x7FFF] on UCD9090 @ Address 65d error: NACK TON_DELAY [Rail #10] write 2.0 ms [0xBBFF] on UCD9090 @ Address 65d error: NACK TON_MAX_FAULT_LIMIT [Rail #10] write [0x8000] on UCD9090 @ Address 65d error: NACK VOUT_CAL_MONITOR [Rail #10] write 0.000 V [0x0000] on UCD9090 @ Address 65d error: NACK VOUT_COMMAND [Rail #10] write 1.000 V [0x4000] on UCD9090 @ Address 65d error: NACK VOUT_MARGIN_HIGH [Rail #10] write 1.117 V [0x477D] on UCD9090 @ Address 65d error: NACK VOUT_MARGIN_LOW [Rail #10] write 0.950 V [0x3CCD] on UCD9090 @ Address 65d error: NACK VOUT_OV_FAULT_LIMIT [Rail #10] write 1.125 V [0x4800] on UCD9090 @ Address 65d error: NACK VOUT_OV_WARN_LIMIT [Rail #10] write 1.117 V [0x477D] on UCD9090 @ Address 65d error: NACK VOUT_SCALE_MONITOR [Rail #10] write 1.000 [0xBA00] on UCD9090 @ Address 65d error: NACK VOUT_UV_FAULT_LIMIT [Rail #10] write 0.850 V [0x3666] on UCD9090 @ Address 65d error: NACK VOUT_UV_WARN_LIMIT [Rail #10] write 0.900 V [0x399A] on UCD9090 @ Address 65d error: NACK