U-Boot 1.1.3 (Dec 4 2006 - 12:05:38) U-Boot code: 81080000 -> 81097628 BSS: -> 810A0018 RAM Configuration: Bank #0: 80000000 256 MB Flash: 16 MB In: serial Out: serial Err: serial ARM Clock :- 297MHz DDR Clock :- 162MHz Hit any key to stop autoboot: 3  2  1  0 BOOTP broadcast 1 DHCP client bound to address 10.0.0.11 TFTP from server 10.0.0.3; our IP address is 10.0.0.11 Filename 'uImage'. Load address: 0x80700000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########### done Bytes transferred = 2382652 (245b3c hex) ## Booting image at 80700000 ... Image Name: Linux-3.0.0-rc2 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2382588 Bytes = 2.3 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Linux version 3.0.0-rc2 (root@localhost.localdomain) (gcc version 4.2.0 (MontaVista 4.2.0-16.0.32.0801914 2008-08-30)) #324 PREEMPT Fri Aug 5 21:39:56 IST 2011 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 CPU: VIVT data cache, VIVT instruction cache Machine: DaVinci DM644x EVM Memory policy: ECC disabled, Data cache writeback DaVinci dm6446 variant 0x0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 29972 Kernel command line: video=davincifb:vid0=0,2500K:vid1=0,2500K:osd0=720x576x16,2025K davinci_enc_mngr.ch0_output=COMPOSITE davinci_enc_mngr.ch0_mode=ntsc console=ttyS0,115200n8 noinitrd rw ip=dhcp root=/dev/nfs nfsroot=10.0.0.3:/home/administrator/workdir/filesys,nolock mem=118M PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 118MB = 118MB total Memory: 114844k/114844k available, 5988k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xff000000 - 0xffe00000 ( 14 MB) vmalloc : 0xc7800000 - 0xfea00000 ( 882 MB) lowmem : 0xc0000000 - 0xc7600000 ( 118 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .init : 0xc0008000 - 0xc002f000 ( 156 kB) .text : 0xc002f000 - 0xc0477000 (4384 kB) .data : 0xc0478000 - 0xc049f120 ( 157 kB) SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Preemptible hierarchical RCU implementation. NR_IRQS:245 Console: colour dummy device 80x30 Calibrating delay loop... 147.86 BogoMIPS (lpj=739328) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok DaVinci: 71 gpio irqs NET: Registered protocol family 16 WARNING: both IDE and Flash are enabled, but they share AEMIF pins. Disable IDE for NAND/NOR support. MUX: Setting register HPIEN_DISABLE PINMUX0 (0x00000000) = 0x80000c1f -> 0x80000c1f MUX: initialized ATAEN MUX: Setting register ATAEN PINMUX0 (0x00000000) = 0x80000c1f -> 0x80020c1f MUX: initialized HDIREN MUX: Setting register HDIREN PINMUX0 (0x00000000) = 0x80020c1f -> 0x80030c1f MUX: initialized MCBSP MUX: Setting register MCBSP PINMUX1 (0x00000004) = 0x00000081 -> 0x00000481 DXM : WLAN IN BOARD : 1 DXM : WLAN SET PLATFORM DATA : 1 DXM : WLAN IN BOARD : 2 bio: create slab at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pcf857x 1-0038: gpios 144..151 on a pcf8574 pcf857x 1-0039: gpios 152..159 on a pcf8574 pcf857x 1-003a: gpios 160..167 on a pcf8574 DXM : GPIO NUMBER : 160 Advanced Linux Sound Architecture Driver Version 1.0.24. cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource timer0_1 Switched to NOHz mode on CPU #0 musb-hdrc: version 6.0, pio, host musb-hdrc musb-hdrc: MUSB HDRC host driver musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected musb-hdrc musb-hdrc: USB Host mode controller at fec64000 using PIO, IRQ 12 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. msgmni has been set to 224 io scheduler noop registered (default) start plist test end plist test Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0x1c20000 (irq = 40) is a 16550A console [ttyS0] enabled serial8250 serial8250.0: unable to register port at index 1 (IO0 MEM1c20400 IRQ41): -22 serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1c20800 IRQ42): -22 brd: module loaded at24 1-0050: 32768 byte 24c256 EEPROM, writable, 64 bytes/write Read MAC addr from EEPROM: ff:ff:ff:ff:ff:ff Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 ide0: MMIO-DMA ide0 at 0xfec661f0-0xfec661f7,0xfec663f6 on irq 22 davinci_mdio davinci_mdio.0: davinci mdio revision 1.3 davinci_mdio davinci_mdio.0: detected phy mask fffffffd davinci_mdio.0: probed davinci_mdio davinci_mdio.0: phy[1]: device 0:01, driver LXT971 console [netcon0] enabled netconsole: network logging started Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbtest i2c /dev entries driver watchdog watchdog: heartbeat 60 sec davinci_mmc davinci_mmc.0: Using DMA, 4-bit mode usbcore: registered new interface driver usbhid usbhid: USB HID core driver DXM AUDIO CODEC I2C ADDRESS: -1069975424 tlv320aic3x-codec 1-001b: asoc: failed to add kcontrol Left Line1R Mux tlv320aic3x-codec 1-001b: asoc: failed to add kcontrol Left Line1L Mux asoc: tlv320aic3x-hifi <-> davinci-mcbsp mapping ok ALSA device list: #0: DaVinci DM6446 EVM TCP cubic registered NET: Registered protocol family 17 lib80211: common routines for IEEE802.11 drivers No RTC device found, ALARM timers will not wake from suspend davinci_emac davinci_emac.1: using random MAC addr: de:a5:c0:df:3f:ac drivers/rtc/hctosys.c: unable to open rtc device (rtc0) net eth0: attached PHY driver [LXT971] (mii_bus:phy_addr=0:01, id=1378e2) PHY: 0:01 - Link is Up - 100/Full Sending DHCP requests ., OK IP-Config: Got DHCP answer from 0.0.0.0, my address is 10.0.0.94 IP-Config: Complete: device=eth0, addr=10.0.0.94, mask=255.255.255.0, gw=10.0.0.1, host=10.0.0.94, domain=, nis-domain=(none), bootserver=0.0.0.0, rootserver=10.0.0.3, rootpath= VFS: Mounted root (nfs filesystem) on device 0:13. Freeing init memory: 156K INIT: version 2.86 booting Starting the hotplug events dispatcher: udevdudevd (986): /proc/986/oom_adj is deprecated, please use /proc/986/oom_score_adj instead. . Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...done. Activating swap...done. Remounting root filesystem...done. Calculating module dependencies WARNING: Couldn't open directory /lib/modules/3.0.0-rc2: No such file or directory FATAL: Could not open /lib/modules/3.0.0-rc2/modules.dep.temp for writing: No such file or directory Loading modules: Checking all file systems: fsck fsck 1.40 (29-Jun-2007) Mounting local filesystems: mount nothing was mounted Setting up networking .... /etc/network/options is deprecated. Setting up IP spoofing protection: rp_filter done. Disabling IPv4 packet forwarding: done. Disabling TCP/IP Explicit Congestion Notification: done. Starting network interfaces: done. Starting hotplug subsystem: pci pci [success] usb usb [success] isapnp isapnp [success] ide ide [success] input input [success] scsi scsi [success] done. Starting portmap daemon.... Cleaning: /tmp /var/lock /var/run done. Setting pseudo-terminal access permissions...done. Updating /etc/motd...done. INIT: Entering runlevel: 3 Starting system log daemon: syslogd klogd. Starting NFS common utilities: statd. Starting internet superserver: inetd. Starting OpenBSD Secure Shell server: sshd. usb mounting in process... waiting for usb ........ insert usb ............................. mount: special device /dev/sda1 does not exist access the usb... start playing.... /etc/rc.d/rc3.d/S88demos: line 7: cd: /mnt/flashkey/dm6446: No such file or directory /etc/rc.d/rc3.d/S88demos: line 8: ./loadmodules.sh: No such file or directory /etc/rc.d/rc3.d/S88demos: line 9: ./Raahi_RM: No such file or directory MontaVista(R) Linux(R) Professional Edition 5.0.0 (0801921) 10.0.0.94 login: root Last login: Thu Jan 1 00:01:52 1970 on console Linux 10.0.0.94 3.0.0-rc2 #324 PREEMPT Fri Aug 5 21:39:56 IST 2011 armv5tejl GNU/Linux Welcome to MontaVista(R) Linux(R) Professional Edition 5.0.0 (0801921). root@10.0.0.94:~# cd / root@10.0.0.94:/# DXM : host (above) - > ocr = 2097152 mmc0: card claims to support voltages below the defined range. These will be ignored. DXM : OCR = 3145728 DXM : host - > ocr = 3145728 mmc0: queuing unknown CIS tuple 0x91 (3 bytes) mmc0: new SDIO card at address 0001 DXM : WLAN GET PLATEORM DATA : 1 DXM : IRQ = 37 DXM : REF_CLOCK = 2 DXM : TCXO_CLK = 0 DXM : PLATFORM_QUIRKS = 0 DXM : WLAN SET REF_CLOCK = 2 loaded initialized root@10.0.0.94:/# cat /proc/net/wireless Inter-| sta-| Quality | Discarded packets | Missed | WE face | tus | link level noise | nwid crypt frag retry misc | beacon | 22 wlan2: 0000 0 0 0 0 0 0 0 0 0 root@10.0.0.94:/# ifconfig wlan2 up DXM : intr = 0 DXM : intr = 0 DXM : intr = 34 firmware booted (Rev 6.1.5.50.74) root@10.0.0.94:/# iwlist wlan2 scanning Warning: Driver for device wlan2 has been compiled with version 22 of Wireless Extension, while this program supports up to version 21. Some things may be broken... ELP wakeup timeout! Hardware recovery in progress. FW ver: Rev 6.1.5.50.74 pc: 0x0 down wlan2 Interface doesn't support scanning : Resource temporarily unavailable ieee80211 phy0: Hardware restart was requested root@10.0.0.94:/# DXM : intr = 32 DXM : intr = 32 DXM : intr = 32 DXM : intr = 32 DXM : intr = 32 DXM : intr = 32 DXM : intr = 32 DXM : intr = 32 DXM : intr = 32 DXM : intr = 32 DXM : intr = 32 DXM : intr = 32 DXM : intr = 32 DXM : intr = 32 DXM : intr = 32 DXM : intr = 32 DXM : intr = 32 DXM : intr = 32 DXM : intr = 32 DXM : intr = 32 timeout waiting for the hardware to complete initialization fw version incorrect value command complete timeout ------------[ cut here ]------------ WARNING: at drivers/net/wireless/wl12xx/cmd.c:108 wl1271_cmd_send+0x28c/0x3a8() Modules linked in: Backtrace: [] (dump_backtrace+0x0/0x114) from [] (dump_stack+0x18/0x1c) r6:c0202f08 r5:c04397e4 r4:0000006c [] (dump_stack+0x0/0x1c) from [] (warn_slowpath_common+0x58/0x70) [] (warn_slowpath_common+0x0/0x70) from [] (warn_slowpath_null+0x24/0x2c) r8:c04820d8 r7:c701526c r6:ffffd99f r5:c7014ec0 r4:ffffff92 [] (warn_slowpath_null+0x0/0x2c) from [] (wl1271_cmd_send+0x28c/0x3a8) [] (wl1271_cmd_send+0x0/0x3a8) from [] (wl1271_cmd_configure+0x3c/0x64) [] (wl1271_cmd_configure+0x0/0x64) from [] (wl1271_acx_event_mbox_mask+0x70/0xc8) r5:cf9a1bfe r4:c71875a0 [] (wl1271_acx_event_mbox_mask+0x0/0xc8) from [] (wl1271_event_unmask+0x18/0x20) r6:c7014f44 r5:c7014ec0 r4:c7014f54 [] (wl1271_event_unmask+0x0/0x20) from [] (wl1271_boot+0x408/0x69c) [] (wl1271_boot+0x0/0x69c) from [] (wl1271_op_add_interface+0xe4/0x248) r8:c7014100 r7:00000000 r6:c7014ee4 r5:c7014ec0 r4:c72307c8 [] (wl1271_op_add_interface+0x0/0x248) from [] (ieee80211_reconfig+0x94/0x498) [] (ieee80211_reconfig+0x0/0x498) from [] (ieee80211_restart_work+0x6c/0x94) [] (ieee80211_restart_work+0x0/0x94) from [] (process_one_work+0x11c/0x37c) r4:c7038000 [] (process_one_work+0x0/0x37c) from [] (worker_thread+0x120/0x360) [] (worker_thread+0x0/0x360) from [] (kthread+0x88/0x90) [] (kthread+0x0/0x90) from [] (do_exit+0x0/0x748) r6:c0047f58 r5:c0060498 r4:c702dee0 ---[ end trace a54f81dae39b1a86 ]--- CONFIGURE command NOK failed to set acx_event_mbox_mask: -110 EVENT mask setting failed DXM : mmc_io_rw_extended : 6 -110 sdio read failed (-110) DXM : mmc_io_rw_extended : 6 -84 sdio write failed (-84) DXM : mmc_io_rw_extended : 6 -110 sdio read failed (-110) chip id doesn't match after firmware boot ------------[ cut here ]------------ WARNING: at drivers/mmc/core/core.c:249 mmc_wait_for_cmd+0x80/0x88() Modules linked in: Backtrace: [] (dump_backtrace+0x0/0x114) from [] (dump_stack+0x18/0x1c) r6:c023f754 r5:c0441fe0 r4:000000f9 [] (dump_stack+0x0/0x1c) from [] (warn_slowpath_common+0x58/0x70) [] (warn_slowpath_common+0x0/0x70) from [] (warn_slowpath_null+0x24/0x2c) r8:c7014100 r7:00000000 r6:c70bf000 r5:c7039e40 r4:00000000 [] (warn_slowpath_null+0x0/0x2c) from [] (mmc_wait_for_cmd+0x80/0x88) [] (mmc_wait_for_cmd+0x0/0x88) from [] (mmc_io_rw_direct_host+0xb4/0x164) r7:ffffff92 r6:c7014ee4 r5:c70bf000 r4:00000001 [] (mmc_io_rw_direct_host+0x0/0x164) from [] (mmc_io_rw_direct+0x30/0x48) r5:c71e3c00 r4:00000000 [] (mmc_io_rw_direct+0x0/0x48) from [] (sdio_disable_func+0x40/0xac) [] (sdio_disable_func+0x0/0xac) from [] (wl1271_sdio_set_power+0x50/0x74) r5:c7014ec0 r4:c71e3c00 [] (wl1271_sdio_set_power+0x0/0x74) from [] (wl1271_op_add_interface+0x138/0x248) r5:c7014ec0 r4:c72307c8 [] (wl1271_op_add_interface+0x0/0x248) from [] (ieee80211_reconfig+0x94/0x498) [] (ieee80211_reconfig+0x0/0x498) from [] (ieee80211_restart_work+0x6c/0x94) [] (ieee80211_restart_work+0x0/0x94) from [] (process_one_work+0x11c/0x37c) r4:c7038000 [] (process_one_work+0x0/0x37c) from [] (worker_thread+0x120/0x360) [] (worker_thread+0x0/0x360) from [] (kthread+0x88/0x90) [] (kthread+0x0/0x90) from [] (do_exit+0x0/0x748) r6:c0047f58 r5:c0060498 r4:c702dee0 ---[ end trace a54f81dae39b1a87 ]--- ------------[ cut here ]------------ WARNING: at drivers/mmc/core/core.c:176 mmc_wait_for_req+0x100/0x130() Modules linked in: Backtrace: [] (dump_backtrace+0x0/0x114) from [] (dump_stack+0x18/0x1c) r6:c023f6a4 r5:c0441fe0 r4:000000b0 [] (dump_stack+0x0/0x1c) from [] (warn_slowpath_common+0x58/0x70) [] (warn_slowpath_common+0x0/0x70) from [] (warn_slowpath_null+0x24/0x2c) r8:c7014100 r7:c7039ddc r6:00000000 r5:c70bf000 r4:c7039e08 [] (warn_slowpath_null+0x0/0x2c) from [] (mmc_wait_for_req+0x100/0x130) [] (mmc_wait_for_req+0x0/0x130) from [] (mmc_wait_for_cmd+0x68/0x88) r7:00000000 r6:c70bf000 r5:c7039e40 r4:00000000 [] (mmc_wait_for_cmd+0x0/0x88) from [] (mmc_io_rw_direct_host+0xb4/0x164) r7:ffffff92 r6:c7014ee4 r5:c70bf000 r4:00000001 [] (mmc_io_rw_direct_host+0x0/0x164) from [] (mmc_io_rw_direct+0x30/0x48) r5:c71e3c00 r4:00000000 [] (mmc_io_rw_direct+0x0/0x48) from [] (sdio_disable_func+0x40/0xac) [] (sdio_disable_func+0x0/0xac) from [] (wl1271_sdio_set_power+0x50/0x74) r5:c7014ec0 r4:c71e3c00 [] (wl1271_sdio_set_power+0x0/0x74) from [] (wl1271_op_add_interface+0x138/0x248) r5:c7014ec0 r4:c72307c8 [] (wl1271_op_add_interface+0x0/0x248) from [] (ieee80211_reconfig+0x94/0x498) [] (ieee80211_reconfig+0x0/0x498) from [] (ieee80211_restart_work+0x6c/0x94) [] (ieee80211_restart_work+0x0/0x94) from [] (process_one_work+0x11c/0x37c) r4:c7038000 [] (process_one_work+0x0/0x37c) from [] (worker_thread+0x120/0x360) [] (worker_thread+0x0/0x360) from [] (kthread+0x88/0x90) [] (kthread+0x0/0x90) from [] (do_exit+0x0/0x748) r6:c0047f58 r5:c0060498 r4:c702dee0 ---[ end trace a54f81dae39b1a88 ]--- ------------[ cut here ]------------ WARNING: at drivers/mmc/core/core.c:612 mmc_release_host+0x40/0x48() Modules linked in: Backtrace: [] (dump_backtrace+0x0/0x114) from [] (dump_stack+0x18/0x1c) r6:c023f3e4 r5:c0441fe0 r4:00000264 [] (dump_stack+0x0/0x1c) from [] (warn_slowpath_common+0x58/0x70) [] (warn_slowpath_common+0x0/0x70) from [] (warn_slowpath_null+0x24/0x2c) r8:c7014100 r7:ffffff92 r6:c7014ee4 r5:c7014ec0 r4:c70bf000 [] (warn_slowpath_null+0x0/0x2c) from [] (mmc_release_host+0x40/0x48) [] (mmc_release_host+0x0/0x48) from [] (sdio_release_host+0x28/0x48) r4:c71e3c00 [] (sdio_release_host+0x0/0x48) from [] (wl1271_sdio_set_power+0x58/0x74) [] (wl1271_sdio_set_power+0x0/0x74) from [] (wl1271_op_add_interface+0x138/0x248) r5:c7014ec0 r4:c72307c8 [] (wl1271_op_add_interface+0x0/0x248) from [] (ieee80211_reconfig+0x94/0x498) [] (ieee80211_reconfig+0x0/0x498) from [] (ieee80211_restart_work+0x6c/0x94) [] (ieee80211_restart_work+0x0/0x94) from [] (process_one_work+0x11c/0x37c) r4:c7038000 [] (process_one_work+0x0/0x37c) from [] (worker_thread+0x120/0x360) [] (worker_thread+0x0/0x360) from [] (kthread+0x88/0x90) [] (kthread+0x0/0x90) from [] (do_exit+0x0/0x748) r6:c0047f58 r5:c0060498 r4:c702dee0 ---[ end trace a54f81dae39b1a89 ]--- firmware boot failed despite 3 retries ------------[ cut here ]------------ WARNING: at kernel/irq/manage.c:507 irq_set_irq_wake+0xb8/0xf0() Unbalanced IRQ 37 wake disable Modules linked in: Backtrace: [] (dump_backtrace+0x0/0x114) from [] (dump_stack+0x18/0x1c) r6:c007cefc r5:c0420ac8 r4:000001fb [] (dump_stack+0x0/0x1c) from [] (warn_slowpath_common+0x58/0x70) [] (warn_slowpath_common+0x0/0x70) from [] (warn_slowpath_fmt+0x38/0x40) r8:c709c000 r7:c70205c0 r6:00000025 r5:c0483e9c r4:00000000 [] (warn_slowpath_fmt+0x0/0x40) from [] (irq_set_irq_wake+0xb8/0xf0) r3:00000025 r2:c0420b40 [] (irq_set_irq_wake+0x0/0xf0) from [] (wl1271_remove+0x3c/0x54) r6:00000229 r5:c04930b8 r4:c7014ec0 [] (wl1271_remove+0x0/0x54) from [] (sdio_bus_remove+0x30/0x70) r4:c71e3c00 [] (sdio_bus_remove+0x0/0x70) from [] (__device_release_driver+0x60/0xb0) r6:c7314c08 r5:c04930b8 r4:c71e3c08 [] (__device_release_driver+0x0/0xb0) from [] (device_release_driver+0x24/0x30) r5:c71e3c3c r4:c71e3c08 [] (device_release_driver+0x0/0x30) from [] (bus_remove_device+0x94/0xa4) r5:c71e3c08 r4:c71e3c08 [] (bus_remove_device+0x0/0xa4) from [] (device_del+0x104/0x174) r4:c71e3c08 [] (device_del+0x0/0x174) from [] (sdio_remove_func+0x28/0x34) r6:c70bf000 r5:00000001 r4:c71e3c08 [] (sdio_remove_func+0x0/0x34) from [] (mmc_sdio_remove+0x4c/0xa4) r4:00000004 [] (mmc_sdio_remove+0x0/0xa4) from [] (mmc_sdio_detect+0x4c/0x90) r6:c7042000 r5:c70bf000 r4:ffffff92 [] (mmc_sdio_detect+0x0/0x90) from [] (mmc_rescan+0x1a0/0x2f0) r5:c70bf000 r4:60000013 [] (mmc_rescan+0x0/0x2f0) from [] (process_one_work+0x11c/0x37c) r7:c70205c0 r6:00000000 r5:c70bf1a0 r4:c7042000 [] (process_one_work+0x0/0x37c) from [] (worker_thread+0x120/0x360) [] (worker_thread+0x0/0x360) from [] (kthread+0x88/0x90) [] (kthread+0x0/0x90) from [] (do_exit+0x0/0x748) r6:c0047f58 r5:c0060498 r4:c703bee8 ---[ end trace a54f81dae39b1a8a ]--- mmc0: card 0001 removed DXM : host (above) - > ocr = 2097152 mmc0: card claims to support voltages below the defined range. These will be ignored. DXM : OCR = 3145728 DXM : host - > ocr = 3145728 mmc0: queuing unknown CIS tuple 0x91 (3 bytes) mmc0: new SDIO card at address 0001 DXM : WLAN GET PLATEORM DATA : 1 DXM : IRQ = 37 DXM : REF_CLOCK = 2 DXM : TCXO_CLK = 0 DXM : PLATFORM_QUIRKS = 0 DXM : WLAN SET REF_CLOCK = 2 loaded initialized root@10.0.0.94:/#