============================================= Burning 3.0.0.11 u-boot in mcs3001 directory ============================================= dhcp 0x82000000 mcs3001/u-boot-spi-keyt stone-evm.gph BOOTP broadcast 1 DHCP client bound to address 158.218.109.169 Using TCI6638_EMAC device TFTP from server 158.218.109.197; our IP address is 158.218.109.169 Filename 'mcs3001/u-boot-spi-keystone-evm.gph'. Load address: 0x82000000 Loading: *################################################################# ########## 2.1 MiB/s done Bytes transferred = 383968 (5dbe0 hex) TCI6638 EVM # sf probe SF: Detected N25Q128A with page size 64 KiB, total 16 MiB TCI6638 EVM # sf erase 0 0x60000 TCI6638 EVM # sf er write 0x82000000 0 0x5dbe0 TCI6638 EVM # TCI6638 EVM # ============================== 3.0.0.11 u-boot coming up ============================== U-Boot SPL 2013.01 (May 31 2013 - 01:01:04) SF: Detected N25Q128A with page size 64 KiB, total 16 MiB U-Boot 2013.01 (May 31 2013 - 01:01:04) I2C: ready DRAM: 1 GiB NAND: 512 MiB Net: TCI6638_EMAC, TCI6638_EMAC1 Hit any key to stop autoboot: 3 0 TCI6638 EVM # ================== reset env ================== TCI6638 EVM # env default -= f a -a ## Resetting to default environment TCI6638 EVM # setenv no_post 1 TCI6638 EVM # sa setenv serverip 158.218.109.197 TCI6638 EVM # setenv tftp_root mcs303 TCI6638 EVM # saveenv Saving Environment to NAND... Erasing Nand... Erasing at 0x100000 -- 50% complete.Erasing at 0x120000 -- 100% complete. Writing to Nand... done TCI6638 EVM # setenv boot ramfs TCI6638 EVM # saveenv Saving Environment to NAND... Erasing Nand... Erasing at 0x100000 -- 50% complete.Erasing at 0x120000 -- 100% complete. Writing to Nand... done ============================================================== 3.0.0.11 u-boot booting 3.0.3.15 kernel from mcs303 directory ============================================================== TCI6638 EVM # boot BOOTP broadcast 1 DHCP client bound to address 158.218.109.169 Using TCI6638_EMAC device TFTP from server 158.218.109.197; our IP address is 158.218.109.169 Filename 'mcs303/arago-console-image.cpio.gz'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################## 1.8 MiB/s done Bytes transferred = 7827332 (776f84 hex) BOOTP broadcast 1 DHCP client bound to address 158.218.109.169 Using TCI6638_EMAC device TFTP from server 158.218.109.197; our IP address is 158.218.109.169 Filename 'mcs303/uImage-k2hk-evm.dtb'. Load address: 0x87000000 Loading: *############ 1.3 MiB/s done Bytes transferred = 57857 (e201 hex) BOOTP broadcast 1 DHCP client bound to address 158.218.109.169 Using TCI6638_EMAC device TFTP from server 158.218.109.197; our IP address is 158.218.109.169 Filename 'mcs303/skern-keystone-evm.bin'. Load address: 0xc5f0000 Loading: *######### 1.3 MiB/s done Bytes transferred = 45056 (b000 hex) BOOTP broadcast 1 DHCP client bound to address 158.218.109.169 Using TCI6638_EMAC device TFTP from server 158.218.109.197; our IP address is 158.218.109.169 Filename 'mcs303/uImage-keystone-evm.bin'. Load address: 0x88000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# 1.8 MiB/s done Bytes transferred = 3990416 (3ce390 hex) ## installed monitor, freq [133120000], status 133120000 ## Booting kernel from Legacy Image at 88000000 ... Image Name: Linux-3.10.10 Created: 2013-11-24 21:26:00 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3990352 Bytes = 3.8 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 87000000 Booting using the fdt blob at 0x87000000 Loading Kernel Image ... OK OK Using Device Tree in place at 87000000, end 87011200 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.10.10 (gtbldadm@ubuntu-12) (gcc version 4.7.3 20130226 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.03-20130313 - Linaro GCC 2013.03) ) #1 SMP Sun Nov 24 16:25:07 EST 2013 [ 0.000000] CPU: ARMv7 Processor [412fc0f4] revision 4 (ARMv7), cr=30c7387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine: KeyStone2, model: Texas Instruments Keystone 2 SoC [ 0.000000] switching to high address space at 0x800000000 [ 0.000000] cma: CMA: reserved 16 MiB at 1f000000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0be1000 s12032 r8192 d12544 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootwait=1 earlyprintk rdinit=/sbin/init rw root=/dev/ram0 initrd=0x802000000,9M [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 485884k/485884k available, 38404k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc06ff570 (7134 kB) [ 0.000000] .init : 0xc0700000 - 0xc0752f00 ( 332 kB) [ 0.000000] .data : 0xc0754000 - 0xc0798e68 ( 276 kB) [ 0.000000] .bss : 0xc0798e68 - 0xc07c78bc ( 187 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ipc irq: irqchip registered, range 512-539 [ 0.000000] main_pll_clk rate is 798720000, postdiv = 2, mult = 12,prediv = 0 [ 0.000000] pll_clk parent_rate(122880000 Hz), rate(327680000 Hz),postdiv = 6, mult = 15, prediv = 0 [ 0.000000] Architected local timer running at 133.12MHz (phys). [ 0.000000] Switching to timer-based delay loop [ 0.000000] sched_clock: ARM arch timer >56 bits at 133120kHz, resolution 7ns [ 0.000000] keystone timer clock @133120000 MHz [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms [ 0.000000] Console: colour dummy device 80x30 [ 54.596235] Calibrating delay loop (skipped), value calculated using timer frequency.. 266.24 BogoMIPS (lpj=1331200) [ 54.596250] pid_max: default: 4096 minimum: 301 [ 54.596458] Mount-cache hash table entries: 512 [ 54.609985] CPU: Testing write buffer coherency: ok [ 54.610244] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 54.610265] Setting up static identity map for 0xc050a688 - 0xc050a6bc [ 54.683879] CPU1: Booted secondary processor [ 54.683918] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 54.757094] CPU2: Booted secondary processor [ 54.757132] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 54.830296] CPU3: Booted secondary processor [ 54.830332] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 54.830504] Brought up 4 CPUs [ 54.830536] SMP: Total of 4 processors activated (1064.96 BogoMIPS). [ 54.830543] CPU: All CPU(s) started in SVC mode. [ 54.853413] NET: Registered protocol family 16 [ 54.855024] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 54.870731] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 54.870743] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 54.886813] bio: create slab at 0 [ 54.887332] keystone-pcie: keystone_pcie_rc_init - start [ 54.887481] keystone2_pcie_serdes_setup [ 54.889452] keystone2_pcie_serdes_setup done, en_link_train = 1 [ 54.889506] keystone-pcie: MEM 0x0000000050000000..0x000000005fffffff -> 0x0000000050000000 [ 54.889522] keystone-pcie: IO 0x0000000024000000..0x0000000024003fff -> 0x0000000000000000 [ 54.889584] keystone-pcie: pcie - number of legacy irqs = 4 [ 54.889674] keystone-pcie: pcie - number of MSI host irqs = 8, msi_irqs = 32 [ 54.987722] keystone-pcie: Doing PCI Setup...Done [ 54.987732] keystone-pcie: Starting PCI scan... [ 54.987941] PCI host bridge to bus 0000:00 [ 54.987960] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 54.987973] pci_bus 0000:00: root bus resource [io 0x0000-0x3fff] [ 54.987986] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 54.988057] PCI: bus0: Fast back to back transfers enabled [ 54.988083] keystone-pcie: Ending PCI scan... [ 54.988094] keystone-pcie: keystone_pcie_rc_init - end [ 54.988372] vgaarb: loaded [ 54.988894] SCSI subsystem initialized [ 54.989509] usbcore: registered new interface driver usbfs [ 54.989647] usbcore: registered new interface driver hub [ 54.989810] usbcore: registered new device driver usb [ 54.991842] pca953x 2-0020: failed reading register [ 54.991862] pca953x: probe of 2-0020 failed with error -121 [ 54.992144] pps_core: LinuxPPS API ver. 1 registered [ 54.992153] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 54.992259] PTP clock support registered [ 54.992477] keystone-hwqueue hwqueue.4: qmgr start queue 0, number of queues 8192 [ 54.992612] keystone-hwqueue hwqueue.4: added qmgr start queue 0, num of queues 8192, reg_peek e0840000, reg_status e0804000, reg_config e0806000, reg_region e0808000, reg_push e0880000, reg_pop e08c0000 [ 54.992627] keystone-hwqueue hwqueue.4: qmgr start queue 8192, number of queues 8192 [ 54.992752] keystone-hwqueue hwqueue.4: added qmgr start queue 8192, num of queues 8192, reg_peek e0900000, reg_status e080a400, reg_config e080c000, reg_region e080e000, reg_push e0940000, reg_pop e0980000 [ 54.994155] keystone-hwqueue hwqueue.4: qos: sched port @8096, drop sched @8000 [ 54.995768] keystone-hwqueue hwqueue.4: qos: sched port @6496, drop sched @6400 [ 54.997364] keystone-hwqueue hwqueue.4: added pool pool-net: 2048 descriptors of size 128 [ 54.997381] keystone-hwqueue hwqueue.4: added pool pool-rio: 128 descriptors of size 256 [ 54.997397] keystone-hwqueue hwqueue.4: added pool pool-udma: 1636 descriptors of size 256 [ 54.997413] keystone-hwqueue hwqueue.4: added pool pool-xge: 1024 descriptors of size 128 [ 54.997428] keystone-hwqueue hwqueue.4: added pool pool-crypto: 1024 descriptors of size 128 [ 55.000254] keystone-hwqueue hwqueue.4: registered queues 0-16383 [ 55.000728] keystone-hwqueue hwqueue.4: qos version 0x2000106, magic valid [ 55.001270] keystone-hwqueue hwqueue.4: qos version 0x2000106, magic valid [ 55.010166] keystone-pktdma 2004000.pktdma: registered 26 logical channels, flows 32, tx chans: 9, rx chans: 24 [ 55.014800] keystone-pktdma 2a08000.pktdma: registered 24 logical channels, flows 32, tx chans: 32, rx chans: 32, loopback [ 55.015741] keystone-pktdma 2fa1000.pktdma: registered 4 logical channels, flows 32, tx chans: 16, rx chans: 16 [ 55.015973] Switching to clocksource arch_sys_counter [ 55.043549] NET: Registered protocol family 2 [ 55.044171] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 55.044280] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 55.044382] TCP: Hash tables configured (established 4096 bind 4096) [ 55.044427] TCP: reno registered [ 55.044441] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 55.044468] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 55.044756] NET: Registered protocol family 1 [ 55.045008] RPC: Registered named UNIX socket transport module. [ 55.045019] RPC: Registered udp transport module. [ 55.045026] RPC: Registered tcp transport module. [ 55.045034] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 55.045224] Unpacking initramfs... [ 55.824294] Initramfs unpacking failed: junk in compressed archive [ 55.831488] Freeing initrd memory: 9216K (c2000000 - c2900000) [ 55.831896] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 55.977618] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 55.977942] NTFS driver 2.1.30 [Flags: R/O]. [ 55.978416] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 55.978971] msgmni has been set to 998 [ 55.980461] NET: Registered protocol family 38 [ 55.980817] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 55.980829] io scheduler noop registered [ 55.980838] io scheduler deadline registered [ 55.981070] io scheduler cfq registered (default) [ 55.983028] keystone-udma udma0.5: registered udma device udma0 [ 56.059829] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 56.061959] 2530c00.serial: ttyS0 at MMIO 0x2530c00 (irq = 309) is a 16550A [ 56.830488] console [ttyS0] enabled [ 56.834631] 2531000.serial: ttyS1 at MMIO 0x2531000 (irq = 312) is a 16550A [ 56.845622] loop: module loaded [ 56.848752] at24 0-0050: 131072 byte 24c1024 EEPROM, writable, 1 bytes/write [ 56.856587] Generic platform RAM MTD, (c) 2004 Simtec Electronics [ 56.863698] ONFI param page 0 valid [ 56.866939] ONFI flash detected [ 56.869859] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xac (Micron MT29F4G08ABBDAHC), 512MiB, page size: 2048, OOB size: 64 [ 56.880806] Bad block table found at page 262080, version 0x01 [ 56.886825] Bad block table found at page 262016, version 0x01 [ 56.892687] 3 ofpart partitions found on MTD device 30000000.nand [ 56.898357] Creating 3 MTD partitions on "30000000.nand": [ 56.903373] 0x000000000000-0x000000100000 : "u-boot" [ 56.909029] 0x000000100000-0x000000180000 : "params" [ 56.914558] 0x000000180000-0x000020000000 : "ubifs" [ 56.920324] davinci_nand 30000000.nand: controller rev. 2.5 [ 56.926422] spi_davinci 21000400.spi: master is unqueued, this is deprecated [ 56.937139] m25p80 spi32766.0: found n25q128a11, expected n25q128 [ 56.942806] m25p80 spi32766.0: n25q128a11 (16384 Kbytes) [ 56.947772] 2 ofpart partitions found on MTD device spi32766.0 [ 56.953187] Creating 2 MTD partitions on "spi32766.0": [ 56.957978] 0x000000000000-0x000000080000 : "u-boot-spl" [ 56.963878] 0x000000080000-0x000001000000 : "test" [ 56.972877] spi_davinci 21000400.spi: Controller at 0xe0878400 [ 56.978762] spi_davinci 21000600.spi: master is unqueued, this is deprecated [ 56.985331] spi_davinci 21000600.spi: Controller at 0xe087a600 [ 56.991184] spi_davinci 21000800.spi: master is unqueued, this is deprecated [ 56.997753] spi_davinci 21000800.spi: Controller at 0xe087c800 [ 57.004787] libphy: GPIO Bitbanged MDIO: probed [ 57.009762] mdio_bus gpio-ffffffed: cannot get PHY at address 0 [ 57.016039] mdio_bus gpio-ffffffed: cannot get PHY at address 1 [ 57.021676] tun: Universal TUN/TAP device driver, 1.6 [ 57.026366] tun: (C) 1999-2004 Max Krasnyansky [ 57.032854] keystone-netcp 2f00000.netcp: No streaming regs defined [ 57.038844] keystone-netcp 2090000.netcp: cpts rftclk freq not defined [ 57.044978] netif_napi_add() called with weight 128 on device eth%d [ 57.052195] keystone-netcp 2090000.netcp: Created interface "eth0" [ 57.057962] keystone-netcp 2090000.netcp: dma_chan_name nettx0 [ 57.064765] keystone-netcp 2090000.netcp: Created interface "eth1" [ 57.070533] keystone-netcp 2090000.netcp: dma_chan_name nettx1 [ 57.077587] keystone-netcp 2f00000.netcp: Created interface "eth2" [ 57.083336] keystone-netcp 2f00000.netcp: dma_chan_name xgetx0 [ 57.089404] keystone-netcp 2f00000.netcp: Created interface "eth3" [ 57.095172] keystone-netcp 2f00000.netcp: dma_chan_name xgetx1 [ 57.102256] keystone-dwc3 2690000.dwc: usbss revision 47914300 [ 57.107734] keystone-dwc3 2690000.dwc: mapped irq 425 to virq 608 [ 57.302561] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 57.307676] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 57.315732] xhci-hcd xhci-hcd.0.auto: irq 608, io mem 0x02690000 [ 57.321435] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 57.327754] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 57.334462] usb usb1: Product: xHCI Host Controller [ 57.339005] usb usb1: Manufacturer: Linux 3.10.10 xhci-hcd [ 57.344099] usb usb1: SerialNumber: xhci-hcd.0.auto [ 57.349235] hub 1-0:1.0: USB hub found [ 57.352733] hub 1-0:1.0: 1 port detected [ 57.356724] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 57.361829] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 57.369080] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 57.375400] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 57.382107] usb usb2: Product: xHCI Host Controller [ 57.386649] usb usb2: Manufacturer: Linux 3.10.10 xhci-hcd [ 57.391743] usb usb2: SerialNumber: xhci-hcd.0.auto [ 57.396846] hub 2-0:1.0: USB hub found [ 57.400341] hub 2-0:1.0: 1 port detected [ 57.404567] usbcore: registered new interface driver usb-storage [ 57.410477] mousedev: PS/2 mouse device common for all mice [ 57.416011] i2c /dev entries driver [ 57.420225] watchdog 22f0080.wdt: heartbeat 60 sec [ 57.427605] keystone-crypto 20c0000.crypto: crypto accelerator enabled [ 57.434242] usbcore: registered new interface driver usbhid [ 57.439440] usbhid: USB HID core driver [ 57.443448] remoteproc0: 2620040.dsp0 is available [ 57.447979] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 57.456321] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 57.465990] remoteproc0: no firmware found [ 57.470098] rproc-user 2620040.dsp0: registered misc device dsp0 [ 57.476032] remoteproc1: 2620044.dsp1 is available [ 57.480581] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 57.488911] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 57.498571] remoteproc1: no firmware found [ 57.502650] rproc-user 2620044.dsp1: registered misc device dsp1 [ 57.508594] remoteproc2: 2620048.dsp2 is available [ 57.513123] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 57.521456] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 57.531113] remoteproc2: no firmware found [ 57.535185] rproc-user 2620048.dsp2: registered misc device dsp2 [ 57.541109] remoteproc3: 262004c.dsp3 is available [ 57.545657] remoteproc3: Note: remoteproc is still under development and considered experimental. [ 57.553991] remoteproc3: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 57.563644] remoteproc3: no firmware found [ 57.567695] rproc-user 262004c.dsp3: registered misc device dsp3 [ 57.573637] remoteproc4: 2620050.dsp4 is available [ 57.578166] remoteproc4: Note: remoteproc is still under development and considered experimental. [ 57.586502] remoteproc4: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 57.596153] remoteproc4: no firmware found [ 57.600215] rproc-user 2620050.dsp4: registered misc device dsp4 [ 57.606133] remoteproc5: 2620054.dsp5 is available [ 57.610687] remoteproc5: Note: remoteproc is still under development and considered experimental. [ 57.619020] remoteproc5: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 57.628671] remoteproc5: no firmware found [ 57.632731] rproc-user 2620054.dsp5: registered misc device dsp5 [ 57.638672] remoteproc6: 2620058.dsp6 is available [ 57.643202] remoteproc6: Note: remoteproc is still under development and considered experimental. [ 57.651539] remoteproc6: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 57.661201] remoteproc6: no firmware found [ 57.665264] rproc-user 2620058.dsp6: registered misc device dsp6 [ 57.671193] remoteproc7: 262005c.dsp7 is available [ 57.675745] remoteproc7: Note: remoteproc is still under development and considered experimental. [ 57.684084] remoteproc7: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 57.693737] remoteproc7: no firmware found [ 57.697789] rproc-user 262005c.dsp7: registered misc device dsp7 [ 57.703422] rproc-user dspmem.3: kick gpio [ 57.707406] rproc-user dspmem.3: registered misc device dspmem [ 57.713360] oprofile: using arm/armv7-ca15 [ 57.717217] GACT probability on [ 57.720153] Mirror/redirect action on [ 57.723552] Failed to load ipt action [ 57.726952] Simple TC action Loaded [ 57.730894] netem: version 1.3 [ 57.733736] u32 classifier [ 57.736245] Performance counters on [ 57.739819] input device check on [ 57.743217] Actions configured [ 57.746396] Netfilter messages via NETLINK v0.30. [ 57.750774] nf_conntrack version 0.5.0 (7991 buckets, 31964 max) [ 57.756965] ctnetlink v0.93: registering with nfnetlink. [ 57.762292] ipip: IPv4 over IPv4 tunneling driver [ 57.767312] gre: GRE over IPv4 demultiplexor driver [ 57.771842] ip_gre: GRE over IPv4 tunneling driver [ 57.777724] ip_tables: (C) 2000-2006 Netfilter Core Team [ 57.782767] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 57.788726] arp_tables: (C) 2002 David S. Miller [ 57.793067] TCP: cubic registered [ 57.796143] Initializing XFRM netlink socket [ 57.800941] NET: Registered protocol family 10 [ 57.806955] NET: Registered protocol family 17 [ 57.811104] NET: Registered protocol family 15 [ 57.815305] Bridge firewalling registered [ 57.819035] Ebtables v2.0 registered [ 57.895424] 8021q: 802.1Q VLAN Support v1.8 [ 57.900127] sctp: Hash tables configured (established 16384 bind 16384) [ 57.906498] NET: Registered protocol family 41 [ 57.910835] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 57.917985] Registering SWP/SWPB emulation handler [ 57.929024] Freeing unused kernel memory: 328K (c0700000 - c0752000) INIT: version 2.88 booting Starting udev Starting Bootlog daemon: bootlogd. Configuring network interfaces... [ 59.453036] keystone-netcp 2090000.netcp: initializing cpsw version 1.3 (1) SGMII identification value 0x4ed1 [ 59.462488] keystone-netcp 2090000.netcp: Created a cpsw ale engine [ 59.471431] pps pps0: new PPS source ptp0 [ 59.475186] cpts rftclk rate(399360000 HZ),mult(1344328205),shift(29) [ 59.527069] keystone-netcp 2090000.netcp: Using Packet Accelerator Firmware version 0x02000104 [ 59.535080] keystone-netcp 2090000.netcp: pa_clk_rate(163840000 HZ),mult(25000),shift(12) [ 59.547778] net eth0: netcp device eth0 opened [ 59.554272] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 59.559690] 8021q: adding VLAN 0 to HW filter on device eth0 [ 59.564994] net eth0: adding rx vlan id: 0 [ 59.568899] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready udhcpc (v1.20.2) started Sending discover... Sending select for 158.218.109.169... Lease of 158.218.109.169 obtained, lease time 28800 /etc/udhcpc.d/50default: Adding DNS 192.0.2.2 /etc/udhcpc.d/50default: Adding DNS 192.0.2.3 [ 60.041949] keystone-netcp 2090000.netcp: initializing cpsw version 1.3 (1) SGMII identification value 0x4ed1 [ 60.057801] net eth1: netcp device eth1 opened [ 60.063667] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 60.069118] 8021q: adding VLAN 0 to HW filter on device eth1 [ 60.074378] net eth1: adding rx vlan id: 0 udhcpc (v1.20.2) started [ 60.141322] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready Sending discover... Sending discover... Sending discover... No lease, failing done. Sun Nov 24 23:26:00 UTC 2013 Configuring update-modules. INIT: Entering runlevel: 5 Starting telnet daemon. Starting syslogd/klogd: done Starting thttpd. Stopping Bootlog daemon: bootlogd. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org keystone-evm ttyS0 Arago 2013.04 keystone-evm ttyS0 keystone-evm login: ================ Power cycle EVM ================ U-Boot SPL 2013.01 (May 31 2013 - 01:01:04) SF: Detected N25Q128A with page size 64 KiB, total 16 MiB U-Boot 2013.01 (May 31 2013 - 01:01:04) I2C: ready DRAM: 1 GiB NAND: 512 MiB Net: TCI6638_EMAC Warning: TCI6638_EMAC using MAC address from net device , TCI6638_EMAC1 Hit any key to stop autoboot: 3 0 TCI6638 EVM # TCI6638 EVM # ============================================= Burning 3.0.3.15 u-boot in mcs303 directory ============================================= TCI6638 EVM # dhcp p 0x82000000 mcs303/u-boot-spi-keystone-evm.gph BOOTP broadcast 1 DHCP client bound to address 158.218.109.242 Using TCI6638_EMAC device TFTP from server 158.218.109.197; our IP address is 158.218.109.242 Filename 'mcs303/u-boot-spi-keystone-evm.gph'. Load address: 0x82000000 Loading: *################################################################# ############ 1.7 MiB/s done Bytes transferred = 392196 (5fc04 hex) TCI6638 EVM # sf probe SF: Detected N25Q128A with page size 64 KiB, total 16 MiB TCI6638 EVM # sf erase 0 0x60000 TCI6638 EVM # sf write 0x82000000 0 0x5fc04 TCI6638 EVM # TCI6638 EVM # ============================================== Power cycle EVM and 3.0.3.15 u-boot coming up ============================================== U-Boot SPL 2013.01 (Nov 24 2013 - 16:43:18) SF: Detected N25Q128A with page size 64 KiB, total 16 MiB U-Boot 2013.01 (Nov 24 2013 - 16:43:18) I2C: ready Detected SO-DIMM [SQR-SD3T-2G1333SE] DRAM: 1 GiB NAND: 512 MiB Net: TCI6638_EMAC Warning: TCI6638_EMAC using MAC address from net device , TCI6638_EMAC1 Hit any key to stop autoboot: 3 0 TCI6638 EVM # ============= reset env ============= TCI6638 EVM # env default -f -a ## Resetting to default environment TCI6638 EVM # ## Resetting to default environment TCI6638 EVM # ## Resetting to default environment TCI6638 EVM # setenv no_post 1 TCI6638 EVM # setenv tftp_root mcs303 TCI6638 EVM # setenv serverip 158.218.1091. .197 TCI6638 EVM # setenv boot ramfs TCI6638 EVM # saveenv Saving Environment to NAND... Erasing Nand... Erasing at 0x100000 -- 50% complete.Erasing at 0x120000 -- 100% complete. Writing to Nand... done ============================================================= 3.0.3.15 u-boot booting 3.0.3.15 Kernel from mcs303 directory ============================================================= TCI6638 EVM # boot BOOTP broadcast 1 DHCP client bound to address 158.218.109.242 Using TCI6638_EMAC device TFTP from server 158.218.109.197; our IP address is 158.218.109.242 Filename 'mcs303/arago-console-image.cpio.gz'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################## 2.3 MiB/s done Bytes transferred = 7827332 (776f84 hex) BOOTP broadcast 1 DHCP client bound to address 158.218.109.242 Using TCI6638_EMAC device TFTP from server 158.218.109.197; our IP address is 158.218.109.242 Filename 'mcs303/uImage-k2hk-evm.dtb'. Load address: 0x87000000 Loading: *############ 1.3 MiB/s done Bytes transferred = 57857 (e201 hex) BOOTP broadcast 1 DHCP client bound to address 158.218.109.242 Using TCI6638_EMAC device TFTP from server 158.218.109.197; our IP address is 158.218.109.242 Filename 'mcs303/skern-keystone-evm.bin'. Load address: 0xc5f0000 Loading: *######### 1.3 MiB/s done Bytes transferred = 45056 (b000 hex) BOOTP broadcast 1 DHCP client bound to address 158.218.109.242 Using TCI6638_EMAC device TFTP from server 158.218.109.197; our IP address is 158.218.109.242 Filename 'mcs303/uImage-keystone-evm.bin'. Load address: 0x88000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# 2.3 MiB/s done Bytes transferred = 3990416 (3ce390 hex) ## installed monitor, freq [204800000], status 0 ## Booting kernel from Legacy Image at 88000000 ... Image Name: Linux-3.10.10 Created: 2013-11-24 21:26:00 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3990352 Bytes = 3.8 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 87000000 Booting using the fdt blob at 0x87000000 Loading Kernel Image ... OK OK Using Device Tree in place at 87000000, end 87011200 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.10.10 (gtbldadm@ubuntu-12) (gcc version 4.7.3 20130226 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.03-20130313 - Linaro GCC 2013.03) ) #1 SMP Sun Nov 24 16:25:07 EST 2013 [ 0.000000] CPU: ARMv7 Processor [412fc0f4] revision 4 (ARMv7), cr=30c7387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine: KeyStone2, model: Texas Instruments Keystone 2 SoC [ 0.000000] switching to high address space at 0x800000000 [ 0.000000] cma: CMA: reserved 16 MiB at 1f000000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0be1000 s12032 r8192 d12544 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootwait=1 earlyprintk rdinit=/sbin/init rw root=/dev/ram0 initrd=0x802000000,9M [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 485884k/485884k available, 38404k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc06ff570 (7134 kB) [ 0.000000] .init : 0xc0700000 - 0xc0752f00 ( 332 kB) [ 0.000000] .data : 0xc0754000 - 0xc0798e68 ( 276 kB) [ 0.000000] .bss : 0xc0798e68 - 0xc07c78bc ( 187 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ipc irq: irqchip registered, range 512-539 [ 0.000000] main_pll_clk rate is 1228800000, postdiv = 2, mult = 19,prediv = 0 [ 0.000000] pll_clk parent_rate(122880000 Hz), rate(327680000 Hz),postdiv = 6, mult = 15, prediv = 0 [ 0.000000] Architected local timer running at 204.80MHz (phys). [ 0.000000] Switching to timer-based delay loop [ 0.000000] sched_clock: ARM arch timer >56 bits at 204800kHz, resolution 4ns [ 0.000000] keystone timer clock @204800000 MHz [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms [ 0.000000] Console: colour dummy device 80x30 [ 39.763207] Calibrating delay loop (skipped), value calculated using timer frequency.. 409.60 BogoMIPS (lpj=2048000) [ 39.763214] pid_max: default: 4096 minimum: 301 [ 39.763314] Mount-cache hash table entries: 512 [ 39.769674] CPU: Testing write buffer coherency: ok [ 39.769825] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 39.769836] Setting up static identity map for 0xc050a688 - 0xc050a6bc [ 39.809216] CPU1: Booted secondary processor [ 39.809238] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 39.847907] CPU2: Booted secondary processor [ 39.847930] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 39.886593] CPU3: Booted secondary processor [ 39.886614] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 39.886704] Brought up 4 CPUs [ 39.886720] SMP: Total of 4 processors activated (1638.40 BogoMIPS). [ 39.886724] CPU: All CPU(s) started in SVC mode. [ 39.897356] NET: Registered protocol family 16 [ 39.898125] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 39.905402] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 39.905407] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 39.912899] bio: create slab at 0 [ 39.913144] keystone-pcie: keystone_pcie_rc_init - start [ 39.913213] keystone2_pcie_serdes_setup [ 39.914911] keystone2_pcie_serdes_setup done, en_link_train = 1 [ 39.914938] keystone-pcie: MEM 0x0000000050000000..0x000000005fffffff -> 0x0000000050000000 [ 39.914945] keystone-pcie: IO 0x0000000024000000..0x0000000024003fff -> 0x0000000000000000 [ 39.914974] keystone-pcie: pcie - number of legacy irqs = 4 [ 39.915015] keystone-pcie: pcie - number of MSI host irqs = 8, msi_irqs = 32 [ 40.000788] keystone-pcie: Doing PCI Setup...Done [ 40.000793] keystone-pcie: Starting PCI scan... [ 40.000888] PCI host bridge to bus 0000:00 [ 40.000898] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 40.000903] pci_bus 0000:00: root bus resource [io 0x0000-0x3fff] [ 40.000909] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 40.000944] PCI: bus0: Fast back to back transfers enabled [ 40.000957] keystone-pcie: Ending PCI scan... [ 40.000963] keystone-pcie: keystone_pcie_rc_init - end [ 40.001094] vgaarb: loaded [ 40.001349] SCSI subsystem initialized [ 40.001636] usbcore: registered new interface driver usbfs [ 40.001704] usbcore: registered new interface driver hub [ 40.001780] usbcore: registered new device driver usb [ 40.002757] pca953x 2-0020: failed reading register [ 40.002769] pca953x: probe of 2-0020 failed with error -121 [ 40.002903] pps_core: LinuxPPS API ver. 1 registered [ 40.002907] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 40.002956] PTP clock support registered [ 40.003058] keystone-hwqueue hwqueue.4: qmgr start queue 0, number of queues 8192 [ 40.003121] keystone-hwqueue hwqueue.4: added qmgr start queue 0, num of queues 8192, reg_peek e0840000, reg_status e0804000, reg_config e0806000, reg_region e0808000, reg_push e0880000, reg_pop e08c0000 [ 40.003128] keystone-hwqueue hwqueue.4: qmgr start queue 8192, number of queues 8192 [ 40.003186] keystone-hwqueue hwqueue.4: added qmgr start queue 8192, num of queues 8192, reg_peek e0900000, reg_status e080a400, reg_config e080c000, reg_region e080e000, reg_push e0940000, reg_pop e0980000 [ 40.003853] keystone-hwqueue hwqueue.4: qos: sched port @8096, drop sched @8000 [ 40.004609] keystone-hwqueue hwqueue.4: qos: sched port @6496, drop sched @6400 [ 40.005344] keystone-hwqueue hwqueue.4: added pool pool-net: 2048 descriptors of size 128 [ 40.005352] keystone-hwqueue hwqueue.4: added pool pool-rio: 128 descriptors of size 256 [ 40.005359] keystone-hwqueue hwqueue.4: added pool pool-udma: 1636 descriptors of size 256 [ 40.005366] keystone-hwqueue hwqueue.4: added pool pool-xge: 1024 descriptors of size 128 [ 40.005373] keystone-hwqueue hwqueue.4: added pool pool-crypto: 1024 descriptors of size 128 [ 40.007487] keystone-hwqueue hwqueue.4: registered queues 0-16383 [ 40.007763] keystone-hwqueue hwqueue.4: qos version 0x2000106, magic valid [ 40.008171] keystone-hwqueue hwqueue.4: qos version 0x2000106, magic valid [ 40.012675] keystone-pktdma 2004000.pktdma: registered 26 logical channels, flows 32, tx chans: 9, rx chans: 24 [ 40.014849] keystone-pktdma 2a08000.pktdma: registered 24 logical channels, flows 32, tx chans: 32, rx chans: 32, loopback [ 40.015283] keystone-pktdma 2fa1000.pktdma: registered 4 logical channels, flows 32, tx chans: 16, rx chans: 16 [ 40.015394] Switching to clocksource arch_sys_counter [ 40.028624] NET: Registered protocol family 2 [ 40.028921] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 40.028972] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 40.029018] TCP: Hash tables configured (established 4096 bind 4096) [ 40.029046] TCP: reno registered [ 40.029053] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 40.029065] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 40.029208] NET: Registered protocol family 1 [ 40.029336] RPC: Registered named UNIX socket transport module. [ 40.029341] RPC: Registered udp transport module. [ 40.029344] RPC: Registered tcp transport module. [ 40.029348] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 40.029445] Unpacking initramfs... [ 40.393870] Initramfs unpacking failed: junk in compressed archive [ 40.397244] Freeing initrd memory: 9216K (c2000000 - c2900000) [ 40.397471] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 40.464322] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 40.464479] NTFS driver 2.1.30 [Flags: R/O]. [ 40.464690] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 40.464948] msgmni has been set to 998 [ 40.465657] NET: Registered protocol family 38 [ 40.465827] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 40.465833] io scheduler noop registered [ 40.465837] io scheduler deadline registered [ 40.465941] io scheduler cfq registered (default) [ 40.466978] keystone-udma udma0.5: registered udma device udma0 [ 40.502283] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 40.503333] 2530c00.serial: ttyS0 at MMIO 0x2530c00 (irq = 309) is a 16550A [ 41.179781] console [ttyS0] enabled [ 41.183066] 2531000.serial: ttyS1 at MMIO 0x2531000 (irq = 312) is a 16550A [ 41.190889] loop: module loaded [ 41.193567] at24 0-0050: 131072 byte 24c1024 EEPROM, writable, 1 bytes/write [ 41.199924] Generic platform RAM MTD, (c) 2004 Simtec Electronics [ 41.205625] ONFI param page 0 valid [ 41.208474] ONFI flash detected [ 41.211040] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xac (Micron MT29F4G08ABBDAHC), 512MiB, page size: 2048, OOB size: 64 [ 41.220548] Bad block table found at page 262080, version 0x01 [ 41.225631] Bad block table found at page 262016, version 0x01 [ 41.230624] 3 ofpart partitions found on MTD device 30000000.nand [ 41.235603] Creating 3 MTD partitions on "30000000.nand": [ 41.240020] 0x000000000000-0x000000100000 : "u-boot" [ 41.244547] 0x000000100000-0x000000180000 : "params" [ 41.249033] 0x000000180000-0x000020000000 : "ubifs" [ 41.253589] davinci_nand 30000000.nand: controller rev. 2.5 [ 41.258606] spi_davinci 21000400.spi: master is unqueued, this is deprecated [ 41.266517] m25p80 spi32766.0: found n25q128a11, expected n25q128 [ 41.271508] m25p80 spi32766.0: n25q128a11 (16384 Kbytes) [ 41.275857] 2 ofpart partitions found on MTD device spi32766.0 [ 41.280627] Creating 2 MTD partitions on "spi32766.0": [ 41.284825] 0x000000000000-0x000000080000 : "u-boot-spl" [ 41.289606] 0x000000080000-0x000001000000 : "test" [ 41.295687] spi_davinci 21000400.spi: Controller at 0xe0878400 [ 41.300704] spi_davinci 21000600.spi: master is unqueued, this is deprecated [ 41.306475] spi_davinci 21000600.spi: Controller at 0xe087a600 [ 41.311487] spi_davinci 21000800.spi: master is unqueued, this is deprecated [ 41.317250] spi_davinci 21000800.spi: Controller at 0xe087c800 [ 41.322784] libphy: GPIO Bitbanged MDIO: probed [ 41.327119] mdio_bus gpio-ffffffed: cannot get PHY at address 0 [ 41.332544] mdio_bus gpio-ffffffed: cannot get PHY at address 1 [ 41.337447] tun: Universal TUN/TAP device driver, 1.6 [ 41.341574] tun: (C) 1999-2004 Max Krasnyansky [ 41.346986] keystone-netcp 2f00000.netcp: No streaming regs defined [ 41.352225] keystone-netcp 2090000.netcp: cpts rftclk freq not defined [ 41.357595] netif_napi_add() called with weight 128 on device eth%d [ 41.363385] keystone-netcp 2090000.netcp: Created interface "eth0" [ 41.368451] keystone-netcp 2090000.netcp: dma_chan_name nettx0 [ 41.373867] keystone-netcp 2090000.netcp: Created interface "eth1" [ 41.378929] keystone-netcp 2090000.netcp: dma_chan_name nettx1 [ 41.384588] keystone-netcp 2f00000.netcp: Created interface "eth2" [ 41.389644] keystone-netcp 2f00000.netcp: dma_chan_name xgetx0 [ 41.394717] keystone-netcp 2f00000.netcp: Created interface "eth3" [ 41.399772] keystone-netcp 2f00000.netcp: dma_chan_name xgetx1 [ 41.405331] keystone-dwc3 2690000.dwc: usbss revision 47914300 [ 41.410119] keystone-dwc3 2690000.dwc: mapped irq 425 to virq 608 [ 41.580283] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 41.584776] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 41.591501] xhci-hcd xhci-hcd.0.auto: irq 608, io mem 0x02690000 [ 41.596469] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 41.602025] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 41.607932] usb usb1: Product: xHCI Host Controller [ 41.611917] usb usb1: Manufacturer: Linux 3.10.10 xhci-hcd [ 41.616405] usb usb1: SerialNumber: xhci-hcd.0.auto [ 41.620669] hub 1-0:1.0: USB hub found [ 41.623748] hub 1-0:1.0: 1 port detected [ 41.627088] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 41.631582] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 41.637905] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 41.643453] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 41.649362] usb usb2: Product: xHCI Host Controller [ 41.653347] usb usb2: Manufacturer: Linux 3.10.10 xhci-hcd [ 41.657834] usb usb2: SerialNumber: xhci-hcd.0.auto [ 41.662090] hub 2-0:1.0: USB hub found [ 41.665157] hub 2-0:1.0: 1 port detected [ 41.668617] usbcore: registered new interface driver usb-storage [ 41.673687] mousedev: PS/2 mouse device common for all mice [ 41.678405] i2c /dev entries driver [ 41.681696] watchdog 22f0080.wdt: heartbeat 60 sec [ 41.687163] keystone-crypto 20c0000.crypto: crypto accelerator enabled [ 41.692759] usbcore: registered new interface driver usbhid [ 41.697319] usbhid: USB HID core driver [ 41.700672] remoteproc0: 2620040.dsp0 is available [ 41.704670] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 41.712000] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 41.720481] remoteproc0: no firmware found [ 41.723993] rproc-user 2620040.dsp0: registered misc device dsp0 [ 41.724175] remoteproc1: 2620044.dsp1 is available [ 41.724177] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 41.724179] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 41.724199] remoteproc1: no firmware found [ 41.724287] rproc-user 2620044.dsp1: registered misc device dsp1 [ 41.724457] remoteproc2: 2620048.dsp2 is available [ 41.724458] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 41.724460] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 41.724478] remoteproc2: no firmware found [ 41.724559] rproc-user 2620048.dsp2: registered misc device dsp2 [ 41.724729] remoteproc3: 262004c.dsp3 is available [ 41.724730] remoteproc3: Note: remoteproc is still under development and considered experimental. [ 41.724732] remoteproc3: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 41.724750] remoteproc3: no firmware found [ 41.724831] rproc-user 262004c.dsp3: registered misc device dsp3 [ 41.725002] remoteproc4: 2620050.dsp4 is available [ 41.725003] remoteproc4: Note: remoteproc is still under development and considered experimental. [ 41.725005] remoteproc4: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 41.725029] remoteproc4: no firmware found [ 41.725114] rproc-user 2620050.dsp4: registered misc device dsp4 [ 41.725283] remoteproc5: 2620054.dsp5 is available [ 41.725285] remoteproc5: Note: remoteproc is still under development and considered experimental. [ 41.725287] remoteproc5: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 41.725304] remoteproc5: no firmware found [ 41.725385] rproc-user 2620054.dsp5: registered misc device dsp5 [ 41.725560] remoteproc6: 2620058.dsp6 is available [ 41.725561] remoteproc6: Note: remoteproc is still under development and considered experimental. [ 41.725563] remoteproc6: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 41.725580] remoteproc6: no firmware found [ 41.725661] rproc-user 2620058.dsp6: registered misc device dsp6 [ 41.725825] remoteproc7: 262005c.dsp7 is available [ 41.725827] remoteproc7: Note: remoteproc is still under development and considered experimental. [ 41.725828] remoteproc7: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 41.725845] remoteproc7: no firmware found [ 41.725929] rproc-user 262005c.dsp7: registered misc device dsp7 [ 41.725947] rproc-user dspmem.3: kick gpio [ 41.726032] rproc-user dspmem.3: registered misc device dspmem [ 41.726291] oprofile: using arm/armv7-ca15 [ 41.726325] GACT probability on [ 41.726328] Mirror/redirect action on [ 41.726330] Failed to load ipt action [ 41.726333] Simple TC action Loaded [ 41.726667] netem: version 1.3 [ 41.726672] u32 classifier [ 41.726673] Performance counters on [ 41.726674] input device check on [ 41.726675] Actions configured [ 41.726683] Netfilter messages via NETLINK v0.30. [ 41.726692] nf_conntrack version 0.5.0 (7991 buckets, 31964 max) [ 41.726997] ctnetlink v0.93: registering with nfnetlink. [ 41.727196] ipip: IPv4 over IPv4 tunneling driver [ 41.727502] gre: GRE over IPv4 demultiplexor driver [ 41.727505] ip_gre: GRE over IPv4 tunneling driver [ 41.728214] ip_tables: (C) 2000-2006 Netfilter Core Team [ 41.728266] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 41.728288] arp_tables: (C) 2002 David S. Miller [ 41.728312] TCP: cubic registered [ 41.728314] Initializing XFRM netlink socket [ 41.728725] NET: Registered protocol family 10 [ 41.729659] NET: Registered protocol family 17 [ 41.729673] NET: Registered protocol family 15 [ 41.729704] Bridge firewalling registered [ 41.729710] Ebtables v2.0 registered [ 42.079865] 8021q: 802.1Q VLAN Support v1.8 [ 42.083663] sctp: Hash tables configured (established 16384 bind 16384) [ 42.089181] NET: Registered protocol family 41 [ 42.092918] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 42.099197] Registering SWP/SWPB emulation handler [ 42.106318] Freeing unused kernel memory: 328K (c0700000 - c0752000) INIT: version 2.88 booting Starting udev Starting Bootlog daemon: bootlogd. Configuring network interfaces... [ 42.879125] keystone-netcp 2090000.netcp: initializing cpsw version 1.3 (1) SGMII identification value 0x4ed1 [ 42.887344] keystone-netcp 2090000.netcp: Created a cpsw ale engine [ 42.894830] pps pps0: new PPS source ptp0 [ 42.898128] cpts rftclk rate(614400000 HZ),mult(1747626667),shift(30) [ 42.931573] keystone-netcp 2090000.netcp: Using Packet Accelerator Firmware version 0x02000104 [ 42.938628] keystone-netcp 2090000.netcp: pa_clk_rate(163840000 HZ),mult(25000),shift(12) [ 42.948721] net eth0: netcp device eth0 opened [ 42.953769] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 42.958547] 8021q: adding VLAN 0 to HW filter on device eth0 [ 42.963174] net eth0: adding rx vlan id: 0 udhcpc (v1.20.2) started [ 42.972770] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sending discover... Sending select for 158.218.109.169... Lease of 158.218.109.169 obtained, lease time 28685 /etc/udhcpc.d/50default: Adding DNS 192.0.2.2 /etc/udhcpc.d/50default: Adding DNS 192.0.2.3 [ 44.163071] keystone-netcp 2090000.netcp: initializing cpsw version 1.3 (1) SGMII identification value 0x4ed1 [ 44.176007] net eth1: netcp device eth1 opened [ 44.180568] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 44.185341] 8021q: adding VLAN 0 to HW filter on device eth1 [ 44.189967] net eth1: adding rx vlan id: 0 udhcpc (v1.20.2) started [ 44.250711] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready Sending discover... Sending discover... Sending discover... No lease, failing done. Sun Nov 24 23:26:00 UTC 2013 Configuring update-modules. INIT: Entering runlevel: 5 Starting telnet daemon. Starting syslogd/klogd: done Starting thttpd. Stopping Bootlog daemon: bootlogd. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org keystone-evm ttyS0 Arago 2013.04 keystone-evm ttyS0 keystone-evm login: