U-Boot 2010.06 (Aug 15 2013 - 10:52:49) DM8127_IPNC_3.50.00 TI8148-GP rev 2.1 ARM clk: 600MHz DDR clk: 400MHz L3 clk: 200MHz IVA clk: 450MHz ISS clk: 400MHz DSP Default OFF DSS Default OFF DRAM: 512 MiB NAND: HW ECC BCH8 Selected 256 MiB Using default environment The 2nd stage U-Boot will now be auto-loaded Please do not interrupt the countdown till TI8148_EVM prompt if 2nd stage is already flashed Hit any key to stop autoboot: 0 NAND read: device 0 offset 0x20000, size 0x40000 262144 bytes read: OK ## Starting application at 0x81000000 ... U-Boot 2010.06 (Aug 15 2013 - 10:54:21) DM8127_IPNC_3.50.00 TI8148-GP rev 2.1 ARM clk: 600MHz DDR clk: 400MHz L3 clk: 200MHz IVA clk: 450MHz ISS clk: 400MHz DSP Default OFF DSS Default OFF I2C: ready DRAM: 512 MiB NAND: HW ECC BCH8 Selected 256 MiB MMC: OMAP SD/MMC: 0, ON-BOARD SDIO: 1 .:;rrr;;. ,5#@@@@#####@@@@@@#2, ,A@@@hi;;;r5;;;;r;rrSG@@@A, r@@#i;:;s222hG;rrsrrrrrr;ri#@@r :@@hr:r;SG3ssrr2r;rrsrsrsrsrr;rh@@: B@H;;rr;3Hs;rrr;sr;;rrsrsrsrsrsr;;H@B @@s:rrs;5#;;rrrr;r#@H:;;rrsrsrsrsrr:s@@ @@;;srs&X#9;r;r;;,2@@@rrr:;;rrsrsrsrr;;@@ @@;;rrsrrs@MB#@@@@@###@@@@@@#rsrsrsrsrr;;@@ G@r;rrsrsr;#X;SX25Ss#@@#M@#9H9rrsrsrsrsrs;r@G @9:srsrsrs;2@;:;;:.X@@@@@H::;rrsrsrsrsrsrr:3@ X@;rrsrsrsrr;XAi;;:&@@#@Bs:rrsrsrsrsrsrsrsrr;@X @#;rsrsrsrsrr;r2ir@@@###::rrsrsrsrsrsrsrsrsr:@@ @A:rrsrsrsrr;:2@29@@M@@@;:;rrrrsrsrsrsrsrsrs;H@ @&;rsrsrsrr;A@@@@@@###@@@s::;:;;rrsrsrsrsrsr;G@ @#:rrsrsrsr;G@5Hr25@@@#@@@#9XG9s:rrrrsrsrsrs:#@ M@;rsrsrsrs;r@&#;::S@@@@@@@M@@@@Grr:;rsrsrsr;@# :@s;rsrsrsrr:M#Msrr;;&#@@@@@@@@@@H@@5;rsrsr;s@, @@:rrsrsrsr;S@rrrsr;:;r3MH@@#@M5,S@@irrsrr:@@ @A:rrsrsrsrrrrrsrsrrr;::;@##@r:;rH@h;srr:H@ ;@9:rrsrsrsrrrsrsrsrsr;,S@Hi@i:;s;MX;rr:h@; r@B:rrrrsrsrsrsrsrr;;sA@#i,i@h;r;S5;r:H@r ,@@r;rrrsrsrsrsrr;2BM3r:;r:G@:rrr;;r@@, B@Mr;rrrrsrsrsr@@S;;;rrr:5M;rr;rM@H .@@@i;;rrrrsrs2i;rrrrr;r@M:;i@@@. .A@@#5r;;;r;;;rrr;r:r#AsM@@H. ;&@@@@MhXS5i5SX9B@@@@G; :ihM#@@@@@##hs, Date: 2012-11-09 (Friday) Time: 14:30:48 Net: Detected MACID:84:7e:40:e:eb:80 cpsw Hit any key to stop autoboot: 2  1  0 link up on port 0, speed 1000, full duplex Using cpsw device TFTP from server 192.168.1.120; our IP address is 192.168.1.143 Filename 'uImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################ done Bytes transferred = 2493092 (260aa4 hex) ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux-2.6.37_DM8127_IPNC_3.50.00 Created: 2013-08-15 15:07:24 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2493028 Bytes = 2.4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Linux version 2.6.37_DM8127_IPNC_3.50.00 (root@localhost.localdomain) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #1 Thu Aug 15 11:07:15 EDT 2013 CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: ti8148ipnc vram size = 4194304 at 0x0 bootconsole [earlycon0] enabled ti81xx_reserve: ### Reserved DDR region @84f00000 reserved size = 4194304 at 0x0 FB: Reserving 4194304 bytes SDRAM for VRAM Memory policy: ECC disabled, Data cache writeback OMAP chip is TI8148 2.1 SRAM: Mapped pa 0x402f1000 to va 0xfe400000 size: 0xf000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 19040 Kernel command line: console=ttyO0,115200n8 root=/dev/nfs rw mem=80M vram=4M notifyk.vpssm3_sva=0xBFD00000 rootdelay=3 nfsroot=192.168.1.120:/home/simon/test/dm8127_ipnc/Source/ipnc_rdk/target/filesys,nolock eth=84:7e:40:0e:eb:80 ip=192.168.1.143 cmemk.phys_start=0x85000000 cmemk.phys_end=0x89000000 cmemk.allowOverlap=1 earlyprintk cpsw: kernel boot params Ethernet address: 84:7e:40:0e:eb:80 PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 74MB 1MB = 75MB total Memory: 70652k/70652k available, 11268k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xffc00000 - 0xffe00000 ( 2 MB) vmalloc : 0xc5800000 - 0xf8000000 ( 808 MB) lowmem : 0xc0000000 - 0xc5000000 ( 80 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .init : 0xc0008000 - 0xc003e000 ( 216 kB) .text : 0xc003e000 - 0xc04bf000 (4612 kB) .data : 0xc04c0000 - 0xc05004c0 ( 258 kB) SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:375 IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts Total of 128 interrupts on 1 active controller GPMC revision 6.0 Trying to install interrupt handler for IRQ368 Trying to install interrupt handler for IRQ369 Trying to install interrupt handler for IRQ370 Trying to install interrupt handler for IRQ371 Trying to install interrupt handler for IRQ372 Trying to install interrupt handler for IRQ373 Trying to install interrupt handler for IRQ374 Trying to install type control for IRQ375 Trying to set irq flags for IRQ375 OMAP clockevent source: GPTIMER1 at 20000000 Hz Console: colour dummy device 80x30 Calibrating delay loop... 599.65 BogoMIPS (lpj=2998272) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok devtmpfs: initialized TI81XX: Map 0x84f00000 to 0xfe500000 for dram barrier TI81XX: Map 0x40300000 to 0xfe600000 for sram barrier omap_voltage_early_init: voltage driver support not added regulator: core version 0.5 regulator: dummy: NET: Registered protocol family 16 omap_voltage_domain_lookup: Voltage driver init not yet happened.Faulting! omap_voltage_add_dev: VDD specified does not exist! OMAP GPIO hardware version 0.1 OMAP GPIO hardware version 0.1 OMAP GPIO hardware version 0.1 OMAP GPIO hardware version 0.1 omap_mux_init: Add partition: #1: core, flags: 4 _omap_mux_init_gpio: Could not set gpio79 _omap_mux_init_gpio: Could not set gpio80 Cannot clk_get ck_32 Debugfs: Only enabling/disabling deep sleep and wakeup timer is supported now registered ti81xx_vpss device registered ti81xx_vidout device registered ti81xx on-chip HDMI device registered ti81xx_fb device PWM0 init success. PWM1 init success. bio: create slab at 0 SCSI subsystem initialized USBSS revision 4ea2080b registerd cppi-dma Intr @ IRQ 17 Cppi41 Init Done omap_i2c omap_i2c.1: bus 1 rev4.0 at 100 kHz regulator: VRTC: 1800 mV regulator: VIO: 1500 mV regulator: VDD1: 600 <--> 1500 mV at 1100 mV regulator: VDD2: 600 <--> 1500 mV at 1350 mV regulator: VDDCTRL: 600 <--> 1400 mV at 1200 mV regulator: LDO1: 1100 <--> 3300 mV at 1800 mV regulator: LDO2: 1100 <--> 3300 mV at 1800 mV regulator: LDO3: 1100 <--> 3300 mV at 3300 mV regulator: LDO4: 1100 <--> 3300 mV at 1800 mV regulator: LDO5: 1100 <--> 3300 mV at 3300 mV regulator: LDO6: 1100 <--> 3300 mV at 3300 mV regulator: LDO7: 1100 <--> 3300 mV at 3300 mV regulator: LDO8: 1100 <--> 3300 mV at 1800 mV tps65911-rtc tps65911-rtc: rtc core: registered tps65911-rtc as rtc0 tps65910 1-002d: No interrupt support, no core IRQ Advanced Linux Sound Architecture Driver Version 1.0.23. Switching to clocksource gp timer musb-hdrc: version 6.0, peripheral, debug=0 musb-hdrc musb-hdrc.0: dma type: dma-cppi41 MUSB controller-0 revision 4ea20800 usb2phy: computed values rxcalib(15)DACs(30 14 13) usb2phy: override computed values rxcalib(15)DACs(30 14 13) usb2phy_config: musb(0) rxcalib done, rxcalib read value 6f6f5d6e musb-hdrc musb-hdrc.0: USB Peripheral mode controller at c581e000 using DMA, IRQ 18 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NetWinder Floating Point Emulator V0.97 (double precision) PMU: registered new PMU device of type 0 omap-iommu omap-iommu.0: ducati registered omap-iommu omap-iommu.1: sys registered JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. msgmni has been set to 137 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) CMEMK module: built on Aug 15 2013 at 10:56:26 Reference Linux version 2.6.37 File /home/simon/test/dm8127_ipnc/Source/ti_tools/linuxutils_3_23_00_01/packages/ti/sdo/linuxutils/cmem/src/module/cmemk.c allocated heap buffer 0xc7000000 of size 0x4000000 cmemk initialized Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled omap_uart.0: ttyO0 at MMIO 0x48020000 (irq = 72) is a OMAP UART0 console [ttyO0] enabled, bootconsole disabled console [ttyO0] enabled, bootconsole disabled omap_uart.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1 omap_uart.2: ttyO2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2 omap_uart.3: ttyO3 at MMIO 0x481a6000 (irq = 44) is a OMAP UART3 omap_uart.4: ttyO4 at MMIO 0x481a8000 (irq = 45) is a OMAP UART4 omap_uart.5: ttyO5 at MMIO 0x481aa000 (irq = 46) is a OMAP UART5 brd: module loaded loop: module loaded omap2-nand driver initializing NAND device: Manufacturer ID: 0x2c, Chip ID: 0xca (Micron ) Creating 8 MTD partitions on "omap2-nand.0": 0x000000000000-0x000000020000 : "U-Boot-min" 0x000000020000-0x000000260000 : "U-Boot" 0x000000260000-0x000000280000 : "U-Boot Env" 0x000000280000-0x0000006c0000 : "Kernel" 0x0000006c0000-0x000006fc0000 : "File System" 0x000006fc0000-0x000007bc0000 : "Data" 0x000007bc0000-0x00000b0c0000 : "File System2" 0x00000b0c0000-0x000010000000 : "Reserved" davinci_mdio davinci_mdio.0: davinci mdio revision 1.6 davinci_mdio davinci_mdio.0: detected phy mask fffffffe davinci_mdio.0: probed davinci_mdio davinci_mdio.0: phy[0]: device 0:00, driver unknown mice: PS/2 mouse device common for all mice i2c /dev entries driver Linux video capture interface: v2.00 OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec notify_init : notify drivercreated for remote proc id 2 at physical Address 0xbfd00000 cm: Module associated with clock hdmi_i2s_fck didn't enable in 100000 tries asoc: tlv320aic3x-hifi <-> davinci-mcasp.2 mapping ok asoc: HDMI-DAI-CODEC <-> hdmi-dai mapping ok ALSA device list: #0: TI8148 IPNC nf_conntrack version 0.5.0 (1103 buckets, 4412 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 Bridge firewalling registered lib80211: common routines for IEEE802.11 drivers Registering the dns_resolver key type VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 omap_voltage_late_init: Voltage driver support not added Power Management for TI81XX. Detected MACID=84:7e:40:e:eb:80 tps65911-rtc tps65911-rtc: setting system clock to 2012-11-09 14:31:01 UTC (1352471461) CPSW phy found : id is : 0x4dd074 PHY 0:01 not found IP-Config: Guessing netmask 255.255.255.0 IP-Config: Complete: device=eth0, addr=192.168.1.143, mask=255.255.255.0, gw=255.255.255.255, host=192.168.1.143, domain=, nis-domain=(none), bootserver=255.255.255.255, rootserver=192.168.1.120, rootpath= Waiting 3sec before mounting root device... PHY: 0:00 - Link is Up - 1000/Full VFS: Mounted root (nfs filesystem) on device 0:14. devtmpfs: mounted Freeing init memory: 216K INIT: version 2.86 booting Please wait: booting... Starting udev Root filesystem already rw, not remounting Caching udev devnodes root: mount: mounting /dev/root on / failed: No such file or directory NOT configuring network interfaces: / is an NFS mount rm: cannot remove '/tmp': Device or resource busy inside finish.sh UBI: attaching mtd5 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 UBI: max. sequence number: 56 UBI: attached mtd5 to ubi0 UBI: MTD device name: "Data" UBI: MTD device size: 12 MiB UBI: number of good PEBs: 96 UBI: number of bad PEBs: 0 UBI: number of corrupted PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 0 UBI: total number of reserved PEBs: 96 UBI: number of PEBs reserved for bad PEB handling: 2 UBI: max/mean erase counter: 3/1 UBI: image sequence number: -161027269 UBI: background thread "ubi_bgt0d" started, PID 255 UBI device number 0, total 96 LEBs (12189696 bytes, 11.6 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 0, volume 0, name "ubifs_volume" UBIFS: file system size: 10285056 bytes (10044 KiB, 9 MiB, 81 LEBs) UBIFS: journal size: 1015809 bytes (992 KiB, 0 MiB, 6 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 485787 bytes (474 KiB) UBI: attaching mtd7 to ubi1 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 UBI: max. sequence number: 582 UBI: attached mtd7 to ubi1 UBI: MTD device name: "Reserved" UBI: MTD device size: 79 MiB UBI: number of good PEBs: 634 UBI: number of bad PEBs: 0 UBI: number of corrupted PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 0 UBI: total number of reserved PEBs: 634 UBI: number of PEBs reserved for bad PEB handling: 6 UBI: max/mean erase counter: 31/30 UBI: image sequence number: 954328092 UBI: background thread "ubi_bgt1d" started, PID 267 UBI device number 1, total 634 LEBs (80502784 bytes, 76.8 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 1, volume 0, name "ubifs_volume" UBIFS: file system size: 78090240 bytes (76260 KiB, 74 MiB, 615 LEBs) UBIFS: journal size: 3936256 bytes (3844 KiB, 3 MiB, 31 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 3688395 bytes (3601 KiB) ./init.sh: line 5: -f: not found numid=1,iface=MIXER,name='PCM Playback Volume' ; type=INTEGER,access=rw---R--,values=2,min=0,max=127,step=0 : values=127,127 | dBscale-min=-63.50dB,step=0.50dB,mute=0 [c6xdsp ] Remote Debug Shared Memory @ 0xbff00000 [m3video] Remote Debug Shared Memory @ 0xbff05020 [m3vpss ] Remote Debug Shared Memory @ 0xbff0a040 SysLink version : 2.20.02.20 SysLink module created on Date:Aug 15 2013 Time:11:09:09 Trace enabled Trace SetFailureReason enabled /dev/mem opened. Phy Addr : 0x48181560 Data : 0x00000002 secss put in low power state Phy Addr : 0x48180f10 Data : 0x00000000 Phy Addr : 0x48180508 Data : 0x00000302 Phy Addr : 0x48180520 Data : 0x00000002 Phy Addr : 0x48180524 Data : 0x00000002 Phy Addr : 0x48180528 Data : 0x00000002 Phy Addr : 0x4c0000e4 Data : 0x00170208 Phy Addr : 0x4d0000e4 Data : 0x00170208 Phy Addr : 0x4c0000e4 Data : 0x00170208 Phy Addr : 0x4d0000e4 Data : 0x00170208 DDR IOs RX is shutdown [host] Setting L3 bandwidth regulator for [HDVICP0 ] to [press=[0,0] BW=900, WM Cycles=2500] Creat queue id:0 queue id:0 FileMngThread created Creat queue id:32769 queue id:32769 AlramThread created Share memory init success [host] Setting DMM priority for [ISS ] to [0] ( 0x4e000634 = 0x00800000 ) Creat queue id:65538 queue id:65538 Creat queue id:98307 queue id:98307 queue id:32769 [host] Setting DMM priority for [HDVICP0 ] to [1] ( 0x4e000634 = 0x00000009 ) IPNC_3.50.00 (root@localhost.localdomain) (gcc version 4.5.3 20110311 ( [host] Attached to slave procId 2. [host] Attached to slave procId 1. [host] Loaded file ./firmware/ipnc_rdk_fw_m3vpss.xem3 on slave procId 2. [c6xdsp ] Remote Debug Shared Memory @ 0xbff00000 [m3video] Remote Debug Shared Memory @ 0xbff05020 [m3vpss ] Remote Debug Shared Memory @ 0xbff0a040 [host] Started slave procId 2. [host] After Ipc_loadcallback status [0x00000000] [host] Attached to slave procId 0. [host] Loaded file ./firmware/ipnc_rdk_fw_m3video.xem3 on slave procId 1. [m3vpss ] ***** SYSTEM : Frequency - 200000000, - 200000000 [m3vpss ] notify_attach rtnVal 0 [m3vpss ] initProxyServer rtnVal 0 [m3vpss ] [m3vpss ] *** UTILS: CPU KHz = 400000 Khz *** [m3vpss ] [m3vpss ] 91: SYSTEM : System Common Init in progress !!! [m3vpss ] 91: SYSTEM: IPC init in progress !!! [m3vpss ] 91: SYSTEM: Attaching to [HOST] ... [host] Started slave procId 1. [host] After Ipc_loadcallback status [0x00000000] [m3video] ***** SYSTEM : Frequency - 200000000, - 200000000 [m3video] [m3video] *** UTILS: CPU KHz = 400000 Khz *** [m3video] [m3video] 141: SYSTEM : System Common Init in progress !!! [m3video] 141: SYSTEM: IPC init in progress !!! [m3video] 142: SYSTEM: Attaching to [HOST] ... [host] Loaded file ./firmware/ipnc_rdk_fw_c6xdsp.xe674 on slave procId 0. [host] Started slave procId 0. [host] After Ipc_loadcallback status [0x00000000] [c6xdsp ] ***** SYSTEM : Frequency - 500000000, - 500000000 [c6xdsp ] [c6xdsp ] *** UTILS: CPU KHz = 500000 Khz *** [c6xdsp ] [c6xdsp ] 1: SYSTEM : System Common Init in progress !!! [c6xdsp ] 1: SYSTEM: IPC init in progress !!! [c6xdsp ] 1: SYSTEM: Attaching to [HOST] ... [host] After Ipc_startcallback status [0x00000000] [m3video] 1141: SYSTEM: Attaching to [HOST] ... [m3vpss ] 1091: SYSTEM: Attaching to [HOST] ... [m3vpss ] 1094: SYSTEM: Attaching to [HOST] ... SUCCESS !!! [m3vpss ] 1094: SYSTEM: Attaching to [DSP] ... [m3video] 1150: SYSTEM: Attaching to [HOST] ... SUCCESS !!! [m3video] 1150: SYSTEM: Attaching to [DSP] ... [host] After Ipc_startcallback status [0x00000000] [c6xdsp ] 1001: SYSTEM: Attaching to [HOST] ... [c6xdsp ] 1004: SYSTEM: Attaching to [HOST] ... SUCCESS !!! [c6xdsp ] 1004: SYSTEM: Attaching to [VIDEO-M3] ... [host] After Ipc_startcallback status [0x00000000] [m3vpss ] 2094: SYSTEM: Attaching to [DSP] ... [m3video] 2149: SYSTEM: Attaching to [DSP] ... [c6xdsp ] 2003: SYSTEM: Attaching to [VIDEO-M3] ... [m3vpss ] 3094: SYSTEM: Attaching to [DSP] ... [c6xdsp ] 2953: SYSTEM: Attaching to [VIDEO-M3] ... SUCCESS !!! [m3video] 3149: SYSTEM: Attaching to [DSP] ... [c6xdsp ] 2953: SYSTEM: Attaching to [VPSS-M3] ... [m3video] 3150: SYSTEM: Attaching to [DSP] ... SUCCESS !!! [m3video] 3150: SYSTEM: Attaching to [VPSS-M3] ... [m3vpss ] 4094: SYSTEM: Attaching to [DSP] ... [c6xdsp ] 3952: SYSTEM: Attaching to [VPSS-M3] ... [m3video] 4149: SYSTEM: Attaching to [VPSS-M3] ... [c6xdsp ] 4897: SYSTEM: Attaching to [VPSS-M3] ... SUCCESS !!! [m3vpss ] 5094: SYSTEM: Attaching to [DSP] ... [c6xdsp ] 4898: SYSTEM: Opening MsgQ Heap [IPC_MSGQ_MSG_HEAP] ... [m3vpss ] 5094: SYSTEM: Attaching to [DSP] ... SUCCESS !!! [m3vpss ] 5095: SYSTEM: Attaching to [VIDEO-M3] ... [m3video] 5149: SYSTEM: Attaching to [VPSS-M3] ... inside autorun INIT: Entering runlevel: 5 sbulla: unknown partition table [c6xdsp ] 5897: SYSTEM: Opening MsgQ Heap [IPC_MSGQ_MSG_HEAP] ... [m3video] 6095: SYSTEM: Attaching to [VPSS-M3] ... SUCCESS !!! [m3vpss ] 6094: SYSTEM: Attaching to [VIDEO-M3] ... [m3video] 6095: SYSTEM: Opening MsgQ Heap [IPC_MSGQ_MSG_HEAP] ... [m3vpss ] 6095: SYSTEM: Attaching to [VIDEO-M3] ... SUCCESS !!! [m3video] 6095: SYSTEM: Creating MsgQ [VIDEO-M3_MSGQ] ... [m3vpss ] 6095: SYSTEM: Creating MsgQ Heap [IPC_MSGQ_MSG_HEAP] ... [m3video] 6096: SYSTEM: Creating MsgQ [VIDEO-M3_ACK_MSGQ] ... [m3vpss ] 6095: SYSTEM: Creating MsgQ [VPSS-M3_MSGQ] ... [m3video] 6098: SYSTEM: Notify register to [HOST] line 0, event 12 ... [m3vpss ] 6095: SYSTEM: Creating MsgQ [VPSS-M3_ACK_MSGQ] ... [m3video] 6098: SYSTEM: Notify register to [DSP] line 0, event 12 ... [m3vpss ] 6098: SYSTEM: Notify register to [HOST] line 0, event 12 ... [m3video] 6098: SYSTEM: Notify register to [VPSS-M3] line 0, event 12 ... [m3vpss ] 6098: SYSTEM: Notify register to [DSP] line 0, event 12 ... [m3video] 6098: SYSTEM: IPC init DONE !!! [m3vpss ] 6098: SYSTEM: Notify register to [VIDEO-M3] line 0, event 12 ... [m3vpss ] 6098: SYSTEM: IPC init DONE !!! [m3vpss ] Received character 's' [m3video] 6108: MEM: Shared Region 2: Base = 0xb8000000, Length = 0x06900000 (105 MB) [m3vpss ] 6108: MEM: Shared Region 2: Base = 0xb8000000, Length = 0x06900000 (105 MB) [m3video] 6109: MEM: Shared Region 1: Base = 0x89000000, Length = 0x03c00000 (60 MB) [m3vpss ] 6108: MEM: Shared Region 1: Base = 0x89000000, Length = 0x03c00000 (60 MB) [m3video] 6111: SYSTEM : System Common Init Done !!! [m3vpss ] 6111: SYSTEM : System Common Init Done !!! [c6xdsp ] Remote Debug Shared Memory @ 0xbff000 sbulla: unknown partition table 00 [m3video] Remote Debug Shared Memory @ 0xbff05020 [m3vpss ] Remote Debug Shared Memory @ 0xbff0a040 [m3video] Received character 's' Starting telnet daemon [c6xdsp ] Remote Debug Shared Memory @ 0xbff00000 [m3video] Remote Debug Shared Memory @ 0xbff05020 [m3vpss ] Remote Debug Shared Memory @ 0xbff0a040 . Starting syslogd/klogd: done c _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dm814x-evm ttyO0 Arago 2011.09 dm814x-evm ttyO0 dm814x-evm login: root (automatic login) root@dm814x-evm:~# [c6xdsp ] 6897: SYSTEM: Opening MsgQ Heap [IPC_MSGQ_MSG_HEAP] ... [c6xdsp ] 6897: SYSTEM: Creating MsgQ [DSP_MSGQ] ... [c6xdsp ] 6898: SYSTEM: Creating MsgQ [DSP_ACK_MSGQ] ... [c6xdsp ] 6898: SYSTEM: Notify register to [HOST] line 0, event 12 ... [c6xdsp ] 6898: SYSTEM: Notify register to [VIDEO-M3] line 0, event 12 ... [c6xdsp ] 6898: SYSTEM: Notify register to [VPSS-M3] line 0, event 12 ... [c6xdsp ] 6899: SYSTEM: IPC init DONE !!! [c6xdsp ] Received character 's' [c6xdsp ] 6902: MEM: Shared Region 2: Base = 0xb8000000, Length = 0x06900000 (105 MB) [c6xdsp ] 6902: MEM: Shared Region 1: Base = 0x89000000, Length = 0x03c00000 (60 MB) [c6xdsp ] 6903: SYSTEM : System Common Init Done !!! queue id:65538 CPU is TI812x Error: SemWait: Invalid Semaphore handler Error: SemRelease: Invalid Semaphore handler ***************************************************************** IPNC BUILD VERSION: DM8127 IPNC RDK VERSION 03.50.00.08 ***************************************************************** ./bin/ipnc_rdk_mcfw.out VNF_QUALITY TRISTREAM TRIPLE_H264 TI2A AEWB 1080P_D1 H264 HIGH_SPEED1 H264 HIGH_SPEED2 MJPEG 80 & Error: SemWait: Invalid Semaphore handler Error: SemRelease: Invalid Semaphore handler [c6xdsp ] Remote Debug Shared Memory @ 0xbff00000 [m3video] Remote Debug Shared Memory @ 0xbff05020 [m3vpss ] Remote Debug Shared Memory @ 0xbff0a040 [m3vpss ] 7311: SYSTEM : System VPSS Init in progress !!! [c6xdsp ] Remote Debug Shared Memory @ 0xbff00000 [m3video] Remote Debug Shared Memory @ 0xbff05020 [m3vpss ] Remote Debug Shared Memory @ 0xbff0a040 [m3vpss ] === I2C0/2 Clk is active === [m3vpss ] 7329: SYSTEM: Creating ListMP [VPSS-M3_IPC_OUT_0] in region 0 ... [m3vpss ] 7330: SYSTEM: Creating ListMP [VPSS-M3_IPC_IN_0] in region 0 ... [m3vpss ] 7330: SYSTEM: ListElem Shared Addr = 0xbe98b680 [m3vpss ] 7333: SYSTEM: Creating ListMP [VPSS-M3_IPC_OUT_1] in region 0 ... [m3vpss ] 7333: SYSTEM: Creating ListMP [VPSS-M3_IPC_IN_1] in region 0 ... [m3vpss ] 7333: SYSTEM: ListElem Shared Addr = 0xbe98eb80 [m3vpss ] 7348: SYSTEM: Creating ListMP [VPSS-M3_IPC_OUT_23] in region 0 ... [m3vpss ] 7348: SYSTEM: Creating ListMP [VPSS-M3_IPC_IN_23] in region 0 ... [m3vpss ] 7348: SYSTEM: ListElem Shared Addr = 0xbe992080 [c6xdsp ] Remote Debug Shared Memory @ 0xbff00000 [m3video] Remote Debug Shared Memory @ 0xbff05020 [m3vpss ] Remote Debug Shared Memory @ 0xbff0a040 [m3vpss ] 7351: SYSTEM: Creating ListMP [VPSS-M3_IPC_OUT_24] in region 0 ... [m3vpss ] 7351: SYSTEM: Creating ListMP [VPSS-M3_IPC_IN_24] in region 0 ... [m3vpss ] 7352: SYSTEM: ListElem Shared Addr = 0xbe9b1a80 [m3vpss ] 7354: SYSTEM: Creating ListMP [VPSS-M3_IPC_OUT_25] in region 0 ... [m3vpss ] 7355: SYSTEM: Creating ListMP [VPSS-M3_IPC_IN_25] in region 0 ... [m3vpss ] 7355: SYSTEM: ListElem Shared Addr = 0xbe9d1480 [m3vpss ] 7362: SYSTEM: Creating ListMP [VPSS-M3_IPC_OUT_28] in region 0 ... [m3vpss ] 7362: SYSTEM: Creating ListMP [VPSS-M3_IPC_IN_28] in region 0 ... [m3vpss ] 7363: SYSTEM: ListElem Shared Addr = 0xbe9f0e80 [m3vpss ] 7365: SYSTEM: Creating ListMP [VPSS-M3_IPC_OUT_29] in region 0 ... [m3vpss ] 7366: SYSTEM: Creating ListMP [VPSS-M3_IPC_IN_29] in region 0 ... [m3vpss ] 7366: SYSTEM: ListElem Shared Addr = 0xbea0ab00 [m3vpss ] 7368: SYSTEM : HDVPSS Drivers Version: HDVPSS_01_00_01_37 [m3vpss ] 7368: SYSTEM : FVID2 Init in progress !!! [c6xdsp ] Remote Debug Shared Memory @ 0xbff00000 [m3video] Remote Debug Shared Memory @ 0xbff05020 [m3vpss ] Remote Debug Shared Memory @ 0xbff0a040 mkdosfs 3.0.12 (29 Oct 2011) [c6xdsp ] 7201: SYSTEM : System DSP Init in progress !!! unable to get drive geometry, using default 255/63 /dev/sbulla has 255 heads and 63 sectors per track, logical sector size is 512, using 0xf8 media descriptor, with 1024 sectors; file system has 2 12-bit FATs and 4 sectors per cluster. FAT size is 1 sector, and provides 247 clusters. There is 1 reserved sector. Root directory contains 512 slots and uses 32 sectors. Volume ID is 33a3b28e, no volume label. [c6xdsp ] 7207: SYSTEM: Creating ListMP [DSP_IPC_OUT_23] in region 0 ... [c6xdsp ] 7207: SYSTEM: Creating ListMP [DSP_IPC_IN_23] in region 0 ... [c6xdsp ] 7207: SYSTEM: ListElem Shared Addr = 0xbea24780 [c6xdsp ] 7208: SYSTEM: Creating Lg_file_storage gadget: No serial-number string provided! istMP [DSP_IPC_Og_file_storage gadget: File-backed Storage Gadget, version: 1 September 2010 UT_24] in regiong_file_storage gadget: Number of LUNs=1 0 ... [c6xdspg_file_storage gadget-lun0: ro=0, nofua=0, file: /dev/sbulla ] 7208: SYSTEM: Creating ListMP [DSP_IPC_IN_24] in region 0 ... [c6xdsp ] 7208: SYSTEM: ListElem Shared Addr = 0xbea44180 [c6xdsp ] 7210: SYSTEM: Creating ListMP [DSP_IPC_OUT_25] in region 0 ... [c6xdsp ] 7210: SYSTEM: Creating ListMP [DSP_IPC_IN_25] in region 0 ... [c6xdsp ] 7210: SYSTEM: ListElem Shared Addr = 0xbea63b80 [c6xdsp ] 7211: SYSTEM: Creating ListMP [DSP_IPC_OUT_28] in region 0 ... [c6xdsp ] 7211: SYSTEM: Creating ListMP [DSP_IPC_IN_28] in region 0 ... [c6xdsp ] 7211: SYSTEM: ListElem Shared Addr = 0xbea83580 [m3video] 7410: SYSTEM : System Video Init in progress !!! [c6xdsp ] 7212: SYSTEM: Creating ListMP [DSP_IPC_OUT_29] in region 0 ... [c6xdsp ] 7212: SYSTEM: Creating ListMP [DSP_IPC_IN_29] in region 0 ... [c6xdsp ] 7212: SYSTEM: ListElem Shared Addr = 0xbea9d200 [c6xdsp ] !!WARNING.Resource already registered:2 [c6xdsp ] 7212: SYSTEM : Initializing Links !!! [m3video] 7410: SYSTEM : System Video Init Done !!! [c6xdsp ] 7213: SYSTEM : FREE SPACE : System Heap = 6282544 B, Mbx = 10240 msgs) [m3video] 7411: SYSTEM: Creating ListMP [VIDEO-M3_IPC_OUT_0] in region 0 ... [m3video] 7411: SYSTEM: Creating ListMP [VIDEO-M3_IPC_IN_0] in region 0 ... [m3video] 7411: SYSTEM: ListElem Shared Addr = 0xbeab6e80 [m3video] 7414: SYSTEM: Creating ListMP [VIDEO-M3_IPC_OUT_1] in region 0 ... [m3video] 7414: SYSTEM: Creating ListMP [VIDEO-M3_IPC_IN_1] in region 0 ... [m3video] 7415: SYSTEM: ListElem Shared Addr = 0xbeaba380 [c6xdsp ] 7229: SYSTEM : Initializing Links ... DONE !!! [m3video] 7426: SYSTEM: Creating ListMP [VIDEO-M3_IPC_OUT_28] in region 0 ... [m3video] 7427: SYSTEM: Creating ListMP [VIDEO-M3_IPC_IN_28] in region 0 ... [c6xdsp ] 7229: SYSTEM : System DSP Init Done !!! [m3video] 7427: SYSTEM: ListElem Shared Addr = 0xbeabd880 [m3video] 7429: SYSTEM: Creating ListMP [VIDEO-M3_IPC_OUT_29] in region 0 ... [m3video] 7430: SYSTEM: Creating ListMP [VIDEO-M3_IPC_IN_29] in region 0 ... [m3video] 7430: SYSTEM: ListElem Shared Addr = 0xbead7500 [m3video] 7432: HDVICP: Doing PRCM for IVAHD[0] ... [m3vpss ] 7434: SYSTEM : FVID2 Init in progress DONE !!! [m3video] 7432: HDVICP: PRCM for IVAHD[0] ... DONE. [m3vpss ] 7434: SYSTEM : Device Init in progress !!! [m3video] 7433: SYSTEM : Initializing Links !!! [m3vpss ] Iss_init called !!!!!! [m3vpss ] CPIS_init DONE !!!!!! [m3video] 7433: SYSTEM : FREE SPACE : System Heap = 6282128 B, Mbx = 10240 msgs) [m3vpss ] initPrms.isI2cInitReq = 1 [m3video] 7434: SYSTEM : FREE SPACE : SR0 Heap = 14742656 B (14 MB) [m3vpss ] initPrms.isI2cInitReq = 1 [m3video] 7434: SYSTEM : FREE SPACE : Frame Buffer = 110100352 B (104 MB) [m3vpss ] Vps_deviceInit Daughter card not detected/connected! [m3vpss ] Simple mixer control 'PGA',0 Capabilities: cvolume cswitch penum Capture channels: Front Left - Front Right Limits: Capture 0 - 119 Front Left: Capture 80 [67%] [40.00dB] [on] Front Right: Capture 80 [67%] [40.00dB] [on] [m3video] 7434: SYSTEM : FREE SPACE : Bitstream Buffer = 62914432 B (59 MB) [m3video] 7434: SYSTEM: Opening MsgQ [VPSS-M3_MSGQ] ... [m3video] 7435: SYSTEM : FREE SPACE : Tiler Buffer = 127 B (0 MB) - TILER OFF [m3video] 7491: SYSTEM : Initializing Links ... DONE !!! [m3vpss ] I2C2: Passed for address 0x36 !!! queue id:0 [m3vpss ] I2C2: Passed for address 0x55 !!! [m3vpss ] 10162: SYSTEM : Device Init in progress DONE !!! [m3vpss ] 10190: SYSTEM : System VPSS Init Done !!! [m3vpss ] 10190: UTILS: DMA: HWI Create for INT62 !!! [m3vpss ] 10190: SYSTEM : Initializing Links !!! [m3vpss ] 10190: SYSTEM : FREE SPACE : System Heap = 1718872 B, Mbx = 10240 msgs) [m3vpss ] 10190: SYSTEM : FREE SPACE : SR0 Heap = 14742656 B (14 MB) [m3vpss ] 10190: SYSTEM : FREE SPACE : Frame Buffer = 105790336 B (100 MB) [m3vpss ] 10191: SYSTEM : FREE SPACE : Bitstream Buffer = 62914432 B (59 MB) [m3vpss ] 10191: SYSTEM : FREE SPACE : Tiler Buffer = 127 B (0 MB) - TILER OFF [m3vpss ] Received character 't' [m3vpss ] 10321: SYSTEM : Initializing Links ... DONE !!! [c6xdsp ] Remote Debug Shared Memory @ 0xbff00000 [m3video] Remote Debug Shared Memory @ 0xbff05020 [m3vpss ] Remote Debug Shared Memory @ 0xbff0a040 [m3video] Received character 't' [c6xdsp ] Remote Debug Shared Memory @ 0xbff00000 [m3video] Remote Debug Shared Memory @ 0xbff05020 [m3vpss ] Remote Debug Shared Memory @ 0xbff0a040 [c6xdsp ] Received character 't' DMA: Module install successful, device major num = 248 DRV: Module install successful DRV: Module built on Aug 15 2013 11:26:34 HDMI W1 rev 4.0 HDMI CEC Spec version 1.2 I2C No Ack ApproDrvInit: 3 Creat queue id:131076 queue id:131076 [host] [host] ORG 0x46c00524: 0 [host] NEW 0x46c00524: 2 [host] [host] Application Start Completed [host] 0: SYSTEM: System Common Init in progress !!! [host] 0: SYSTEM: IPC init in progress !!! [host] 12: SYSTEM: CPU [DSP] syslink proc ID is [0] !!! [host] 12: SYSTEM: CPU [VIDEO-M3] syslink proc ID is [1] !!! [host] 12: SYSTEM: CPU [VPSS-M3] syslink proc ID is [2] !!! [host] 12: SYSTEM: CPU [HOST] syslink proc ID is [3] !!! [host] 12: SYSTEM: Opening MsgQ Heap [IPC_MSGQ_MSG_HEAP] ... [host] 14: SYSTEM: Creating MsgQ [HOST_MSGQ] ... [host] 16: SYSTEM: Creating MsgQ [HOST_ACK_MSGQ] DMA: ChannelID allocated:4 ... [host] DMA: ChannelID allocated:10 17: SYSTEM: Opening MsgQ [DSP_MSGQ] ... [host] 18: SYSTEM: Opening MsgQ [VIDEO-M3_MSGQ] ... [host] 18: SYSTEM: Opening MsgQ [VPSS-M3_MSGQ] ... [host] 19: SYSTEM: Notify register to [DSP] line 0, event 12 ... [host] 20: SYSTEM: Notify register to [VIDEO-M3] line 0, event 12 ... [host] 20: SYSTEM: Notify register to [VPSS-M3] line 0, event 12 ... [host] 21: SYSTEM: IPC init DONE !!! [host] 22: SYSTEM: Creating ListMP [HOST_IPC_OUT_28] in region 0 ... [host] 24: SYSTEM: Creating ListMP [HOST_IPC_IN_28] in region 0 ... [host] 26: SYSTEM: ListElem Shared Addr = 0x405bb180 [host] 27: SYSTEM: Creating ListMP [HOST_IPC_OUT_29] in region 0 ... [host] 29: SYSTEM: Creating ListMP [HOST_IPC_IN_29] in region 0 ... [host] 31: SYSTEM: ListElem Shared Addr = 0x405d4e00 [host] 32: SYSTEM: Creating ListMP [HOST_IPC_OUT_23] in region 0 ... [host] 34: SYSTEM: Creating ListMP [HOST_IPC_IN_23] in region 0 ... [host] 36: SYSTEM: ListElem Shared Addr = 0x405eea80 [host] 37: SYSTEM: Creating ListMP [HOST_IPC_OUT_24] in region 0 ... [host] 39: SYSTEM: Creating ListMP [HOST_IPC_IN_24] in region 0 ... [host] 40: SYSTEM: ListElem Shared Addr = 0x4060e480 [host] 41: SYSTEM: Creating ListMP [HOST_IPC_OUT_25] in region 0 ... [host] 43: SYSTEM: Creating ListMP [HOST_IPC_IN_25] in region 0 ... [host] 45: SYSTEM: ListElem Shared Addr = 0x4062de80 [host] 46: SYSTEM: System Common Init Done !!! [host] Vsys_allocBuf - addr = 0x4d1fb000,size = 65011712 [host] MCFW_IPCBITS:App_streamSysInit:virt addr of 85000000 cir buffer is 4d1fb000 ##########pInfo->totalsize 63897600 [host] MemMng_memcpy_open:OSA_dmaOpen passed with ch id = 4 [host] CacheMng_MemCpy_open:OSA_dmaOpen passed with ch id = 10 queue id:131076 queue id:65538 [host] MCFW_IPCBITS:App_ipcBitsRecvStreamFxn:Entered...queue id:0 queue id:32769 [host] MCFW_IPCFRAMES:App_ipcFramesSendRecvFxn:Entered... [host] Before System_linkControl SYSTEM_M3VPSS_CMD_GET_DISPLAYCTRL_INIT [host] ********** FULL FEATURE USECASE ******** [host] ********* Entered Tri Streaming usecase - H264 1080p @60fps + H264 D1 @30fps + MJPEG 1080p @5fps ******** [host] 133: MCFW : CPU Revision [ES2.1] !!! [host] 133: MCFW : Detected [UNKNOWN] Board !!! [host] 133: MCFW : Base Board Revision [REV A] !!! [m3vpss ] VPS_DCTRL_INST_0 [m3vpss ] IOCTL_VPS_DCTRL_SET_VENC_OUTPUT SYSTEM_DC_VENC_DVO2 [m3vpss ] IOCTL_VPS_DCTRL_SET_VENC_OUTPUT SYSTEM_DC_VENC_HDMI [m3vpss ] IOCTL_VPS_DCTRL_SET_VENC_OUTPUT SYSTEM_DC_VENC_SD [m3vpss ] IOCTL_VPS_DCTRL_SET_VENC_CLK_SRC VPS_DC_VENC_HDMI | VPS_DC_VENC_DVO2 [m3vpss ] 11883: CAMERA: Create in progress !!! [m3vpss ] 11883: CAMERA: VIP0 PortA camera mode is [ 8-bit, Non-mux Embedded Sync] !!! [m3vpss ] 11893: CAMERA: VIP 0: VID DEC 268436736 (0x36): bebebebe:bebebebe:8ebd60d8, AUD_STATUS -1094795586 [m3vpss ] Stream ID 0: chId = 0 VpsUtils_queCreate. [m3vpss ] Stream ID 1: chId = 0 VpsUtils_queCreate. [m3vpss ] 12101: CAMERA: Create Done !!! [m3vpss ] 12189: CAMERA: Detect video in progress !!! [m3vpss ] 12189: CAMERA: Detect video Done !!! [m3vpss ] 12189: VNF: [m3vpss ] Create in progress ... !!! [m3vpss ] 12190: VNF: [m3vpss ] Input Channel CH0 of 1952 x 1112, pitch = (1984, 1984) [0,0][PROGRESSIVE] [7] ... [m3vpss ] 12441: VNF: [m3vpss ] Create ... DONE !!! [m3vpss ] 12537: DUP : Create Done !!! [m3vpss ] 12543: DUP : Create Done !!! [m3vpss ] 12545: MERGE : Create Done !!! [m3vpss ] DCC server task running [m3vpss ] {SWOSD} edma3Handle->tccVal = 36 [m3vpss ] {SWOSD} edma3Handle->chId = 36 [m3vpss ] {SWOSD} edma3Handle->tccVal = 37 [m3vpss ] {SWOSD} edma3Handle->chId = 37 [m3vpss ] {SWOSD} edma3Handle->tccVal = 38 [m3vpss ] {SWOSD} edma3Handle->chId = 38 [m3vpss ] 12520: SWOSD : Create Done !!! [m3vpss ] 12616: DUP : Create Done !!! [m3vpss ] 12616: SCLR: Create in progress !!! [m3vpss ] 12638: SCLR : Loading Up-scaling Co-effs ... [m3vpss ] 12638: SCLR : Co-effs Loading ... DONE !!! [m3video] 12657: IPC_IN_M3 : Create in progress !!! [m3vpss ] SCLR:HEAPID:0 USED:64 [m3video] 12657: SYSTEM: Opening ListMP [VPSS-M3_IPC_OUT_0] ... [m3vpss ] SCLR:HEAPID:1 USED:5952 [m3video] 12657: SYSTEM: Opening ListMP [VPSS-M3_IPC_IN_0] ... [m3vpss ] 12639: SCLR: Create Done !!! [m3video] 12660: IPC_IN_M3 : Create Done !!! [m3vpss ] 12565: FD : Alg Create Done !!! [m3video] 12661: ENCODE: Create in progress ... !!! [m3vpss ] 12565: FD : Create Done !!! [m3vpss ] 12655: IPC_OUT_M3 : Create in progress !!! [m3vpss ] 12656: IPC_OUT_M3 : Create Done !!! [m3video] 12724: ENCODE: Creating CH0 of 1920 x 1080, pitch = (1952, 1952) [PROGRESSIVE] [NON-TILED ], bitrate = 8000 Kbps ... [m3video] ENCLINK_H264:HEAPID:0 USED:13808 [m3video] 12831: ENCODE: Creating CH1 of 720 x 480, pitch = (720, 720) [PROGRESSIVE] [NON-TILED ], bitrate = 8000 Kbps ... [host] IpcBitsInLink_tskMain:Entered [host] 1112: IPC_BITS_IN : Create in progress !!! [host] 1112: IPC_BITS_IN : ListMPOpen start !!! [host] 1112: SYSTEM: Opening ListMP [VIDEO-M3_IPC_OUT_28] ... [host] 1114: SYSTEM: Opening ListMP [VIDEO-M3_IPC_IN_28] ... [host] 1116: IPC_BITS_IN : ListMPOpen done !!! [host] 1117: IPC_BITS_IN : System_linkGetInfo done !!! [host] 1117: IPC_BITS_IN : Create Done !!! [m3vpss ] 12954: DISPLAY: Create in progress !!! [m3video] ENCLINK_H264:HEAPID:0 USED:11912 [m3vpss ] DisplayId = 1,DataFormat = 7 [m3video] 12941: ENCODE: Creating CH2 of 1920 x 1080, pitch = (1952, 1952) [PROGRESSIVE] [NON-TILED ], bitrate = 100 Kbps ... [m3vpss ] SC2 displayInstId = 6 [m3vpss ] 12955: DISPLAY: Create Done !!! [m3vpss ] 12956: DISPLAY: Create in progress !!! [m3video] ENCLINK_JPEG:HEAPID:0 USED:4432 [m3vpss ] DisplayId = 4,DataFormat = 7 [m3video] 12941: ENCODE: All CH Create ... DONE !!! [m3vpss ] SD displayInstId = 2 [host] USECASE SETUP DONE [m3vpss ] 12957: DISPLAY: Create Done !!! [m3video] ENCLINK:HEAPID:0 USED:30472 [m3vpss ] 12958: DISPLAY: Start in progress !!! [m3video] 12944: ENCODE: Create ... DONE !!! [m3video] 12804: VSTAB : Alg Create Done !!! [m3video] 12804: VSTAB : Create Done !!! [m3video] 12945: IPC_BITS_OUT : Create in progress !!! [m3video] 12948: IPC_BITS_OUT : Create Done !!! [m3vpss ] 13001: DISPLAY: Start Done !!! [m3vpss ] 13001: DISPLAY: AUX PATH: 46 fps, Latency (Min / Max) = ( 255 / 0 ), Callback Interval (Min / Max) = ( 255 / 0 ) !!! [m3vpss ] 13002: DISPLAY: Start in progress !!! [m3vpss ] 13065: DISPLAY: Start Done !!! [m3vpss ] 13065: DISPLAY: SDDAC(SEC1): 15 fps, Latency (Min / Max) = ( 255 / 0 ), Callback Interval (Min / Max) = ( 255 / 0 ) !!! [m3vpss ] 12978: CAMERA: Start in progress !!! [m3vpss ] 12978: CAMERA: Start Done !!! [host] Application Run Completed [m3vpss ] 13126: CAMERA: Fields = 2 (fps = 0), Total Resets = 0 (Avg 0 ms per reset) [host] ITT server task running !!! [host] ITT ittServer_run [host] ITT Server Message initialization successful [host] ITT capture task created [host] DCC server Message ques is open succefully [host] Setting cmd <1> in message <403d5100> [host] Posting message <403d5100> in QId <20002> [m3vpss ] Command 1 recived from HOST A8 [host] Response from M3 is : 1 [host] Response from M3 is : 1 [host] Default parameters were sent sucessfully [host] Server Socket created with ID <22> [m3vpss ] Command 2 recived from HOST A8 [m3vpss ] New DCC data of size <33603> [m3vpss ] Call to VNF_LINK_CMD_UPDATE_DCC 536870977 queue id:0 ApproDrvInit: 10 queue id:131076 Initializing... ...done initializing ApproDrvInit: 6 queue id:131076 Initializing... ApproDrvInit: 2 queue id:131076 Initializing... ...done initializing ApproDrvInit: 9 queue id:131076 Initializing... ...done initializing ...done initializing ApproDrvInit: 8 queue id:131076 Initializing... ...done initializing Play this stream using the URL: Play this stream using the URL: rtsp://0.0.0.0:8554/PSIA/Streaming/channels/1?videoCodecType=MPEG4 (We use port 8301 for optional RTSP-over-HTTP tunneling.) Play this stream using the URL: rtsp://0.0.0.0:8556/PSIA/Streaming/channels/2?videoCodecType=H.264 (We use port rtsp://0.0.0.0:8553/PSIA/Streaming/channels/1?videoCodecType=MPEG4 (We use port 8300 for optional RTSP-over-HTTP tunneling.) 8303 for optional RTSP-over-HTTP tunneling.) Play this stream using the URL: rtsp://0.0.0.0:8557/PSIA/Streaming/channels/2?videoCodecType=H.264 (We use port 8304 for optional RTSP-over-HTTP tunneling.) Play this stream using the URL: rtsp://0.0.0.0:8555/PSIA/Streaming/channels/0?videoCodecType=MJPEG (We use port 8302 for optional RTSP-over-HTTP tunneling.) ApproDrvInit: 7 queue id:131076 TimeOut occure in boot_proc. Program exit. TimeOut occure in boot_proc. Program exit. [host] Usecase is Active !!! ApproDrvExit: 7 Error: WaitStreamReady Fail. Error: SemWait: Invalid Semaphore handler