U-Boot 2010.06 (Nov 14 2013 - 11:35:08) TI8168-GP rev 2.1 ARM clk: 987MHz DDR clk: 398MHz I2C: ready DRAM: 2 GiB NAND: HW ECC BCH8 Selected 512 MiB MMC: OMAP SD/MMC: 0 :,;;:;:;;;;;;;;r;;:,;;:;:;;;;;;;;:,;;:;:;;;;;;;;:,;;:;:;;;;;;;;:;;;;;;;;:,;;:;: ;,;:::;;;;r;;;rssiSiS552X5252525259GX2X9hX9X9XX2325S55252i5:,;;:;:;;;;;;;;:,;;: ;:;;;;;;;rrssSsS52S22h52299GGAAMHMM#BBH#B#HMM#HMBA&&XX2255S2S5Si:,;;:;:;;;;;;;; ;:;;r;;rsrrriiXS5S329&A&MH#BMB#A&9XXA252GXiSXX39AAMMMBB&G22S5i2SSiiiisi:,;;:;:; ;;;;;r;rr2iisiih393HB#B#AA99i22irrrX3X52AGsisss2Xii2299HBMA&X2S5S5iSiisSsi:,;;: r:r;rrsrsihXSi2&##MHB&Ahh3AGHGA9G9h&#H##@@@##MAMMXXX9SSS29&&HGGX2i5iisiiisisi:, ;;rrrrsSiiiA&ABH&A9GAGhAhBAMHA9HM@@@@@@@@@@@@@@@@@@@HHhAh2S2SX9&Gh22SSiisiiisii r:rrssisiS2XM##&h3AGAX&3GG3Ssr5H@M#HM2; ;2X&&&MHMB###GBB#B&XXSSs529XX55iSsisisi r;rsrisSi2XHAhX99A3XXG&&XS;:,rH#HGhAS @@@@3rs2XBM@@A552&&AHA2XiisSS252SSsisSs r;issi5S22&&3iSSX292&hXsr;;:;h@&G339&S9@@@@2@MA&9&HB##Xris29ABMAAX2ir;rsSi5iss5 rrsSi2XhG&9GXh399&X99i;;;;;;r#H&293H9X#@@@@@@@B&9GhAH@XrrsrsiXABHB&HG2rr;rrSiSi ;:rsisS599&AA9XG&3A35r;:::;,;BMh&&2iX5A@@@@@@@&392X5GB2;;;r;iSX393A##A&Xi:::rsi ;:rss552222X553&XHMhir;;::,:,h#HhGSXhG3#@@@@#AXXS2XAHA;::;;;;ss55XShBA3239r:,;; r;ii2S5SSi2i53hirsh2srr::,,,,;MMXX359&Ah3h&Si59SX99A#i:,::::;;sri2,.2r;:SGAr;,: ;:;rrrrssiriXGSi::shs;;;,,,:,,rBBA9h5s5h5iS5isi2SAHB5:,,,:::;rrs5&SrisSX5Srrr:, ;,r;;;;rsriSSrrrr;;5Xrr;;,:,,.,;9AA2SsisS5323XXXG9&i:.,,::;;r;;;srrrrrr;;:;:::: :,;r;r;rrissrrr;:;::;s;;;;,:,,..,r293h222hXXAAGGGX;:,,,:,:,::;:;::,:,,,,...,,,, ;,;;;;rrrrrrrrirr;,.,,:::::::,,,,.,;SX&ABAB2hhXir:,,.,,.,,:,,,,..,,,..,..,,,..: :.:;:;;;:;;;;r;rrs;:.. ,,:::::,:,:,,.::rrsrr;;,,.......,..,....,,,,,,,...,.,,:, :.:::,::::::;;r;rrr;:.......,.,.,,:::,,...............,,::.,,,,:,::,,:,:,,,:,;: ,.::,:,,,,,;;;;;;;;r;;::,..............................;;;:;::::,:::::::,:,:,,, : ,,:,,,,,,,,,,,,,:;rrr;;:;,,,,,,,::,.,.:.,.,;s,:;;;;:;:;;;;;::::,:::,:::,:,:,: ,.,,,,,,,...,,.,,....................................:,............:,,,:,:,,,,, Net: Detected MACID:84:7e:40:b3:af:82 Ethernet PHY: GENERIC @ 0x01 DaVinci EMAC Hit any key to stop autoboot: 0 Card did not respond to voltage select! ** Can't read from device 0 ** ** Unable to use mmc 0:1 for fatload ** NAND read: device 0 offset 0x280000, size 0x440000 4456448 bytes read: OK ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux-2.6.37 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2571716 Bytes = 2.5 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Linux version 2.6.37 (user@ball-build) (gcc version 4.3.3 (Sourcery G++ Lite 203 CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: ti8168evm reserved size = 52428800 at 0x0 FB: Reserving 52428800 bytes SDRAM for VRAM Memory policy: ECC disabled, Data cache writeback OMAP chip is TI8168 2.0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 79656 Kernel command line: console=ttyO2,115200n8 rootwait ro mem=364M@0x80000000 vmas PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 314MB = 314MB total Memory: 312684k/312684k available, 60052k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xffc00000 - 0xffe00000 ( 2 MB) vmalloc : 0xd7000000 - 0xf8000000 ( 528 MB) lowmem : 0xc0000000 - 0xd6c00000 ( 364 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .init : 0xc0008000 - 0xc003b000 ( 204 kB) .text : 0xc003b000 - 0xc04dc000 (4740 kB) .data : 0xc04dc000 - 0xc0525080 ( 293 kB) SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:407 IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts Total of 128 interrupts on 1 active controller GPMC revision 6.0 Trying to install interrupt handler for IRQ400 Trying to install interrupt handler for IRQ401 Trying to install interrupt handler for IRQ402 Trying to install interrupt handler for IRQ403 Trying to install interrupt handler for IRQ404 Trying to install interrupt handler for IRQ405 Trying to install interrupt handler for IRQ406 Trying to install type control for IRQ407 Trying to set irq flags for IRQ407 OMAP clockevent source: GPTIMER1 at 27000000 Hz Console: colour dummy device 80x30 Calibrating delay loop... 986.31 BogoMIPS (lpj=4931584) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok devtmpfs: initialized omap_voltage_early_init: voltage driver support not added regulator: core version 0.5 regulator: dummy: NET: Registered protocol family 16 omap_voltage_domain_lookup: Voltage driver init not yet happened.Faulting! omap_voltage_add_dev: VDD specified does not exist! OMAP GPIO hardware version 0.1 OMAP GPIO hardware version 0.1 omap_mux_init: Add partition: #1: core, flags: 0 _omap_mux_get_by_name: Could not find signal i2c2_scl.i2c2_scl _omap_mux_get_by_name: Could not find signal i2c2_sda.i2c2_sda NOR: Can't request GPMC CS registered ti816x_gpio_vr device registered ti816x_sr device pm_dbg_init: only OMAP3 supported registered ti81xx_vpss device registered ti81xx_vidout device registered ti81xx on-chip HDMI device registered ti81xx_fb device registered ti81xx_vin device ti81xx_pcie: Invoking PCI BIOS... ti81xx_pcie: Setting up Host Controller... ti81xx_pcie: Register base mapped @0xd7020000 ti81xx_pcie: Starting PCI scan... PCI: bus0: Fast back to back transfers enabled bio: create slab at 0 regulator: VFB: 800 <--> 1025 mV at 1010 mV vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USBSS revision 4ea20809 registerd cppi-dma Intr @ IRQ 17 Cppi41 Init Done omap_i2c omap_i2c.1: bus 1 rev4.0 at 100 kHz omap_i2c omap_i2c.2: bus 2 rev4.0 at 100 kHz Advanced Linux Sound Architecture Driver Version 1.0.23. Switching to clocksource gp timer musb-hdrc: version 6.0, host, debug=0 musb-hdrc musb-hdrc.0: dma type: dma-cppi41 MUSB controller-0 revision 4ea20800 musb-hdrc musb-hdrc.0: MUSB HDRC host driver musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 1 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: MUSB HDRC host driver usb usb1: Manufacturer: Linux 2.6.37 musb-hcd usb usb1: SerialNumber: musb-hdrc.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected musb-hdrc musb-hdrc.0: USB Host mode controller at d701e000 using DMA, IRQ 18 musb-hdrc musb-hdrc.1: dma type: dma-cppi41 MUSB controller-1 revision 4ea20800 musb-hdrc musb-hdrc.1: MUSB HDRC host driver musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 2 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: MUSB HDRC host driver usb usb2: Manufacturer: Linux 2.6.37 musb-hcd usb usb2: SerialNumber: musb-hdrc.1 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected musb-hdrc musb-hdrc.1: USB Host mode controller at d7026800 using DMA, IRQ 19 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NetWinder Floating Point Emulator V0.97 (double precision) PMU: registered new PMU device of type 0 omap-iommu omap-iommu.0: ducati registered omap-iommu omap-iommu.1: sys registered JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. msgmni has been set to 610 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled omap_uart.0: ttyO0 at MMIO 0x48020000 (irq = 72) is a OMAP UART0 omap_uart.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1 omap_uart.2: ttyO2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2 console [ttyO2] enabled brd: module loaded loop: module loaded ahci ahci.0: forcing PORTS_IMPL to 0x3 ahci ahci.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl platform mode ahci ahci.0: flags: ncq sntf pm led clo only pmp pio slum part ccc scsi0 : ahci_platform scsi1 : ahci_platform ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a150fff] port 0x100 irq 16 ata2: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a150fff] port 0x180 irq 16 omap2-nand driver initializing NAND device: Manufacturer ID: 0x2c, Chip ID: 0xcc (Micron ) Creating 5 MTD partitions on "omap2-nand.0": 0x000000000000-0x000000260000 : "U-Boot" 0x000000260000-0x000000280000 : "U-Boot Env" 0x000000280000-0x0000006c0000 : "Kernel" 0x0000006c0000-0x00000cee0000 : "File System" 0x00000cee0000-0x000020000000 : "Reserved" UBI: attaching mtd3 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 usb 1-1: new full speed USB device using musb-hdrc and address 2 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) usb 1-1: New USB device found, idVendor=0451, idProduct=2077 usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-1: Product: General Purpose USB Hub hub 1-1:1.0: USB hub found hub 1-1:1.0: 7 ports detected usb 2-1: new low speed USB device using musb-hdrc and address 2 usb 2-1: New USB device found, idVendor=060b, idProduct=0540 usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 usb 2-1: Product: USB Keyboard usb 1-1.6: new full speed USB device using musb-hdrc and address 3 usb 1-1.6: New USB device found, idVendor=06c2, idProduct=004f usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.6: Product: PhidgetEncoder usb 1-1.6: Manufacturer: Phidgets Inc. usb 1-1.6: SerialNumber: 300134 usb 1-1.7: new full speed USB device using musb-hdrc and address 4 usb 1-1.7: New USB device found, idVendor=06c2, idProduct=0045 usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.7: Product: PhidgetInterfaceKit usb 1-1.7: Manufacturer: Phidgets Inc. usb 1-1.7: SerialNumber: 337032 usb 1-1.5: new low speed USB device using musb-hdrc and address 5 usb 1-1.5: New USB device found, idVendor=04b4, idProduct=8087 usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.5: Product: PS/2 to USB Adapter usb 1-1.5: Manufacturer: Cypress UBI: max. sequence number: 5 UBI: attached mtd3 to ubi0 UBI: MTD device name: "File System" UBI: MTD device size: 200 MiB UBI: number of good PEBs: 1577 UBI: number of bad PEBs: 24 UBI: number of corrupted PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 0 UBI: total number of reserved PEBs: 1577 UBI: number of PEBs reserved for bad PEB handling: 15 UBI: max/mean erase counter: 1/0 UBI: image sequence number: 0 UBI: background thread "ubi_bgt0d" started, PID 39 davinci_mdio davinci_mdio.0: davinci mdio revision 1.6 davinci_mdio davinci_mdio.0: detected phy mask fffffff9 davinci_mdio.0: probed davinci_mdio davinci_mdio.0: phy[1]: device 0:01, driver unknown davinci_mdio davinci_mdio.0: phy[2]: device 0:02, driver unknown usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver dm9601 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice rtc-ds1307 1-0068: rtc core: registered ds1338 as rtc0 rtc-ds1307 1-0068: 56 bytes nvram i2c /dev entries driver Linux video capture interface: v2.00 usbcore: registered new interface driver uvcvideo USB Video Class driver (v1.0.0) OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec input: USB Keyboard as /devices/platform/omap/ti81xx-usbss/musb-hdrc.1/usb2/2-10 generic-usb 0003:060B:0540.0001: input: USB HID v1.11 Keyboard [USB Keyboard] o0 input: USB Keyboard as /devices/platform/omap/ti81xx-usbss/musb-hdrc.1/usb2/2-11 generic-usb 0003:060B:0540.0002: input: USB HID v1.11 Mouse [USB Keyboard] on u1 generic-usb 0003:06C2:004F.0003: claimed by neither input, hiddev nor hidraw input: Cypress PS/2 to USB Adapter as /devices/platform/omap/ti81xx-usbss/musb-2 generic-usb 0003:04B4:8087.0004: input: USB HID v1.00 Mouse [Cypress PS/2 to US0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver notify_init : notify drivercreated for remote proc id 2 at physical Address 00 usbcore: registered new interface driver snd-usb-audio asoc: tlv320aic3x-hifi <-> davinci-mcasp.2 mapping ok ALSA device list: #0: TI81XX EVM TCP cubic registered NET: Registered protocol family 17 VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 omap_voltage_late_init: Voltage driver support not added Power Management for TI81XX. smartreflex smartreflex: Driver initialized rtc-ds1307 1-0068: setting system clock to 2013-11-21 15:08:46 UTC (1385046526) UBI error: ubi_io_read: error -74 (ECC error) while reading 126976 bytes from Ps UBI error: ubi_io_read: error -74 (ECC error) while reading 126976 bytes from Ps UBIFS: recovery needed UBI error: ubi_io_read: error -74 (ECC error) while reading 126976 bytes from Ps UBI error: ubi_io_read: error -74 (ECC error) while reading 26624 bytes from PEs UBI error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEBs UBI error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEBs UBI error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEBs UBI error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEBs UBI error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEBs UBIFS: recovery deferred UBIFS: mounted UBI device 0, volume 0, name "rootfs" UBIFS: mounted read-only UBIFS: file system size: 195162112 bytes (190588 KiB, 186 MiB, 1537 LEBs) UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 0 bytes (0 KiB) VFS: Mounted root (ubifs filesystem) readonly on device 0:15. devtmpfs: mounted Freeing init memory: 204K INIT: version 2.86 booting Please wait: booting... Error opening /dev/fb0: No such file or directory Starting udev udevd (72): /proc/72/oom_adj is deprecated, please use /proc/72/oom_score_adj i. Root filesystem already rw, not remounting Caching udev devnodes NET: Registered protocol family 10 ALSA: Restoring mixer settings... Configuring network interfaces... davinci_mdio davinci_mdio.0: resetting idled r net eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, id=20005c7a) ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc (v1.13.2) started No state is present for card EVM Found hardware: "" "" "" "" "" Hardware is initialized using a generic method Sending discover... No state is present for card EVM Sending discover... Sending discover... No lease, forking to background net eth1: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:02, id=20005c7a) ADDRCONF(NETDEV_UP): eth1: link is not ready done. Setting up IP spoofing protection: rp_filter. INIT: Entering runlevel: 5 Loading HDVICP2 Firmware DM816X prcm_config_app version: 2.0.0.1 Doing PRCM settings... PRCM for IVHD0 is in Progress, Please wait..... BW Phy Addr : 0x48180600 Data : 0x00000002 AW Phy Addr : 0x48180600 Data : 0x00000002 Phy Addr : 0x48180c04 Data : 0x00000037 BW Phy Addr : 0x48180620 Data : 0x00070000 AW Phy Addr : 0x48180620 Data : 0x00070002 BW Phy Addr : 0x48180624 Data : 0x00030000 AW Phy Addr : 0x48180624 Data : 0x00010002 Phy Addr : 0x48180600 Data : 0x00000102 BW Phy Addr : 0x48180c10 Data : 0x00000007 AW Phy Addr : 0x48180c10 Data : 0x00000003 Phy Addr : 0x48180c14 Data : 0x00000004 BW Phy Addr : 0x58088000 Data : 0xc72cff1b AW Phy Addr : 0x58088000 Data : 0xeafffffe BW Phy Addr : 0x58098000 Data : 0x17f49f2f AW Phy Addr : 0x58098000 Data : 0xeafffffe BW Phy Addr : 0x48180c10 Data : 0x00000003 AW Phy Addr : 0x48180c10 Data : 0x00000000 Phy Addr : 0x48180c14 Data : 0x00000007 PRCM for IVHD0 is Done Successfully PRCM for IVHD1 is in Progress, Please wait..... BW Phy Addr : 0x48180700 Data : 0x00000002 AW Phy Addr : 0x48180700 Data : 0x00000002 Phy Addr : 0x48180d04 Data : 0x00000037 BW Phy Addr : 0x48180720 Data : 0x00070000 AW Phy Addr : 0x48180720 Data : 0x00050002 BW Phy Addr : 0x48180724 Data : 0x00030000 AW Phy Addr : 0x48180724 Data : 0x00010002 Phy Addr : 0x48180700 Data : 0x00000102 BW Phy Addr : 0x48180d10 Data : 0x00000007 AW Phy Addr : 0x48180d10 Data : 0x00000003 Phy Addr : 0x48180d14 Data : 0x00000004 BW Phy Addr : 0x5a088000 Data : 0xe0711bd4 AW Phy Addr : 0x5a088000 Data : 0xeafffffe BW Phy Addr : 0x5a098000 Data : 0xd1e70192 AW Phy Addr : 0x5a098000 Data : 0xeafffffe BW Phy Addr : 0x48180d10 Data : 0x00000003 AW Phy Addr : 0x48180d10 Data : 0x00000000 Phy Addr : 0x48180d14 Data : 0x00000007 PRCM for IVHD1 is Done Successfully PRCM for IVHD2 is in Progress, Please wait..... BW Phy Addr : 0x48180800 Data : 0x00000002 AW Phy Addr : 0x48180800 Data : 0x00000002 Phy Addr : 0x48180e04 Data : 0x00000037 BW Phy Addr : 0x48180820 Data : 0x00070000 AW Phy Addr : 0x48180820 Data : 0x00050002 BW Phy Addr : 0x48180824 Data : 0x00030000 AW Phy Addr : 0x48180824 Data : 0x00010002 Phy Addr : 0x48180800 Data : 0x00000102 BW Phy Addr : 0x48180e10 Data : 0x00000007 AW Phy Addr : 0x48180e10 Data : 0x00000003 Phy Addr : 0x48180e14 Data : 0x00000004 BW Phy Addr : 0x53088000 Data : 0x04b2835d AW Phy Addr : 0x53088000 Data : 0xeafffffe BW Phy Addr : 0x53098000 Data : 0x202578f7 AW Phy Addr : 0x53098000 Data : 0xeafffffe BW Phy Addr : 0x48180e10 Data : 0x00000003 AW Phy Addr : 0x48180e10 Data : 0x00000000 Phy Addr : 0x48180e14 Data : 0x00000007 PRCM for IVHD2 is Done Successfully PRCM Initialization completed SysLink version : 2.20.00.14 SysLink module created on Date:Mar 22 2013 Time:11:31:38 FIRMWARE: I2cInit will be done by M3 FIRMWARE: Memory map bin file not passed Usage : firmware_loader [-mm] ===Mandatory arguments=== 0: DSP, 1: Video-M3, 2: Vpss-M3 firmware binary file to start/stop the firmware ===Optional arguments=== -mmap input memory map bin file name -i2c 0: i2c init not done by M3, 1(default): i2c init done by FIRMWARE: isI2cInitRequiredOnM3: 1 FIRMWARE: Default memory configuration is used Firmware Loader debugging not configured Default FL_DEBUG: warning Allowed FL_DEBUG levels: error, warning, info, debug, log MemCfg: DCMM (Dynamically Configurable Memory Map) Version : 2.1.2.1 PHY: 0:02 - Link is Up - 1000/Full ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready FIRMWARE: 1 start Successful Loading HDVPSS Firmware FIRMWARE: Memory map bin file not passed Usage : firmware_loader [-mm] ===Mandatory arguments=== 0: DSP, 1: Video-M3, 2: Vpss-M3 firmware binary file to start/stop the firmware ===Optional arguments=== -mmap input memory map bin file name -i2c 0: i2c init not done by M3, 1(default): i2c init done by FIRMWARE: isI2cInitRequiredOnM3: 0 FIRMWARE: Default memory configuration is used Firmware Loader debugging not configured Default FL_DEBUG: warning Allowed FL_DEBUG levels: error, warning, info, debug, log MemCfg: DCMM (Dynamically Configurable Memory Map) Version : 2.1.2.1 FIRMWARE: 2 start Successful VPSS_DCTRL: setup 7375 filter failed VPSS_DCTRL: setup 7360 filter failed. HDMI W1 rev 2.0 HDMI CEC Spec version 1.2 Loading DSP Firmware FIRMWARE: firmware file s Starting system message bus: Unknown username "haldaemon" in message bus confige dbus. Starting telnet daemon. Starting syslogd/klogd: done Starting thttpd. /etc/rc5.d/S30pvr-init: line 16: cputype: not found No SGX hardware, not starting PVR : section starting /usr/sbin/dropbear ifup: interface eth1 already configured Rpc_XmlRpcServer.cpp Rpc_XmlRpcServer port 8765 Rpc_XmlRpcServer.cpp run on port 8765 getInstance 0x4a0c0 _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dm816x-evm ttyO2 Arago 2011.09 dm816x-evm ttyO2 dm816x-evm login: Rpc_XmlRpcServer.cpp Rpc_XmlRpcServer port 9020 Rpc_XmlRpcServ0 t root@dm816x-evm:~# init process 1 (1296) init process 1 (1296) Process 1 (1296) failed ping (13) Rpc_XmlRpcServer.cpp Rpc_XmlRpcServer port 9020 Rpc_XmlRpcServer.cpp run on port 9020 Rpc_XmlRpcServer.cpp Rpc_XmlRpcServer fd 17 Rpc_XmlRpcServer.cpp run on port 0 UBIFS error (pid 1306): ubifs_check_node: bad CRC: calculated 0x7e60074a, read 3 UBIFS error (pid 1306): ubifs_check_node: bad node at LEB 825:83520 UBIFS error (pid 1306): ubifs_read_node: expected node type 9 UBIFS error (pid 1306): do_readpage: cannot read page 753 of inode 3583, error 7 UBIFS error (pid 1306): ubifs_check_node: bad CRC: calculated 0x7e60074a, read 3 UBIFS error (pid 1306): ubifs_check_node: bad node at LEB 825:83520 UBIFS error (pid 1306): ubifs_read_node: expected node type 9 UBIFS error (pid 1306): do_readpage: cannot read page 753 of inode 3583, error 7 Handling 17 UBIFS error (pid 1320): ubifs_check_node: bad CRC: calculated 0x7e60074a, read 3 UBIFS error (pid 1320): ubifs_check_node: bad node at LEB 825:83520 UBIFS error (pid 1320): ubifs_read_node: expected node type 9 UBIFS error (pid 1320): do_readpage: cannot read page 753 of inode 3583, error 7 Handling 17 UBIFS error (pid 1333): ubifs_check_node: bad CRC: calculated 0x7e60074a, read 3 UBIFS error (pid 1333): ubifs_check_node: bad node at LEB 825:83520 UBIFS error (pid 1333): ubifs_read_node: expected node type 9 UBIFS error (pid 1333): do_readpage: cannot read page 753 of inode 3583, error 7 Handling 17 UBIFS error (pid 1346): ubifs_check_node: bad CRC: calculated 0x7e60074a, read 3 UBIFS error (pid 1346): ubifs_check_node: bad node at LEB 825:83520 UBIFS error (pid 1346): ubifs_read_node: expected node type 9 UBIFS error (pid 1346): do_readpage: cannot read page 753 of inode 3583, error 7