U-Boot 2010.06 (Dec 09 2011 - 12:31:16) DRAM: 2 GiB Using default environment MMC: OMAP SD/MMC: 0 Hit any key to stop autoboot: 0 raise: Signal # 8 caught reading u-boot.bin 184792 bytes read ## Starting application at 0x80800000 ... U-Boot 2010.06 (Dec 09 2011 - 12:10:47) TI8168-GP rev 1.1 ARM clk: 987MHz DDR clk: 796MHz I2C: ready DRAM: 2 GiB NAND: HW ECC Hamming Code selected No NAND device found!!! 0 MiB *** Warning - bad CRC or NAND, using default environment :,;;:;:;;;;;;;;r;;:,;;:;:;;;;;;;;:,;;:;:;;;;;;;;:,;;:;:;;;;;;;;:;;;;;;;;:,;;:;: ;,;:::;;;;r;;;rssiSiS552X5252525259GX2X9hX9X9XX2325S55252i5:,;;:;:;;;;;;;;:,;;: ;:;;;;;;;rrssSsS52S22h52299GGAAMHMM#BBH#B#HMM#HMBA&&XX2255S2S5Si:,;;:;:;;;;;;;; ;:;;r;;rsrrriiXS5S329&A&MH#BMB#A&9XXA252GXiSXX39AAMMMBB&G22S5i2SSiiiisi:,;;:;:; ;;;;;r;rr2iisiih393HB#B#AA99i22irrrX3X52AGsisss2Xii2299HBMA&X2S5S5iSiisSsi:,;;: r:r;rrsrsihXSi2&##MHB&Ahh3AGHGA9G9h&#H##@@@##MAMMXXX9SSS29&&HGGX2i5iisiiisisi:, ;;rrrrsSiiiA&ABH&A9GAGhAhBAMHA9HM@@@@@@@@@@@@@@@@@@@HHhAh2S2SX9&Gh22SSiisiiisii r:rrssisiS2XM##&h3AGAX&3GG3Ssr5H@M#HM2; ;2X&&&MHMB###GBB#B&XXSSs529XX55iSsisisi r;rsrisSi2XHAhX99A3XXG&&XS;:,rH#HGhAS @@@@3rs2XBM@@A552&&AHA2XiisSS252SSsisSs r;issi5S22&&3iSSX292&hXsr;;:;h@&G339&S9@@@@2@MA&9&HB##Xris29ABMAAX2ir;rsSi5iss5 rrsSi2XhG&9GXh399&X99i;;;;;;r#H&293H9X#@@@@@@@B&9GhAH@XrrsrsiXABHB&HG2rr;rrSiSi ;:rsisS599&AA9XG&3A35r;:::;,;BMh&&2iX5A@@@@@@@&392X5GB2;;;r;iSX393A##A&Xi:::rsi ;:rss552222X553&XHMhir;;::,:,h#HhGSXhG3#@@@@#AXXS2XAHA;::;;;;ss55XShBA3239r:,;; r;ii2S5SSi2i53hirsh2srr::,,,,;MMXX359&Ah3h&Si59SX99A#i:,::::;;sri2,.2r;:SGAr;,: ;:;rrrrssiriXGSi::shs;;;,,,:,,rBBA9h5s5h5iS5isi2SAHB5:,,,:::;rrs5&SrisSX5Srrr:, ;,r;;;;rsriSSrrrr;;5Xrr;;,:,,.,;9AA2SsisS5323XXXG9&i:.,,::;;r;;;srrrrrr;;:;:::: :,;r;r;rrissrrr;:;::;s;;;;,:,,..,r293h222hXXAAGGGX;:,,,:,:,::;:;::,:,,,,...,,,, ;,;;;;rrrrrrrrirr;,.,,:::::::,,,,.,;SX&ABAB2hhXir:,,.,,.,,:,,,,..,,,..,..,,,..: :.:;:;;;:;;;;r;rrs;:.. ,,:::::,:,:,,.::rrsrr;;,,.......,..,....,,,,,,,...,.,,:, :.:::,::::::;;r;rrr;:.......,.,.,,:::,,...............,,::.,,,,:,::,,:,:,,,:,;: ,.::,:,,,,,;;;;;;;;r;;::,..............................;;;:;::::,:::::::,:,:,,, : ,,:,,,,,,,,,,,,,:;rrr;;:;,,,,,,,::,.,.:.,.,;s,:;;;;:;:;;;;;::::,:::,:::,:,:,: ,.,,,,,,,...,,.,,....................................:,............:,,,:,:,,,,, MMC: OMAP SD/MMC: 0 Net: not set. Reading from E-fuse Detected MACID:40:5f:c2:1f:ee:7e Ethernet PHY: GENERIC @ 0x01 DaVinci EMAC Hit any key to stop autoboot: 3  2  1  0 raise: Signal # 8 caught reading boot.scr 301 bytes read Running bootscript from MMC/SD to set the ENV... ## Executing script at 80900000 reading uImage 2428456 bytes read ## Booting kernel from Legacy Image at 80009000 ... Image Name: Linux-2.6.37 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2428392 Bytes = 2.3 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Linux version 2.6.37 (danny@ub-for-arm) (gcc version 4.3.3 (Sourcery G++ Lite 20 09q1-203) ) #1 Tue Apr 10 14:25:59 CEST 2012 CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: ti8168evm bootconsole [earlycon0] enabled vram size = 52428800 at 0x0 reserved size = 52428800 at 0x0 FB: Reserving 52428800 bytes SDRAM for VRAM Memory policy: ECC disabled, Data cache writeback OMAP chip is TI8168 1.1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 52224 Kernel command line: console=ttyO2,115200n8 rootwait root=/dev/mmcblk0p2 rw mem= 256M earlyprintk notifyk.vpssm3_sva=0xBF900000 vram=50M ti81xxfb.vram=0:16M,1:16 M,2:6M ip=off noinitrd PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 206MB = 206MB total Memory: 203420k/203420k available, 58724k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xffc00000 - 0xffe00000 ( 2 MB) vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB) lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .init : 0xc0008000 - 0xc003a000 ( 200 kB) .text : 0xc003a000 - 0xc049c000 (4488 kB) .data : 0xc049c000 - 0xc04e36c0 ( 286 kB) SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:407 IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts Total of 128 interrupts on 1 active controller GPMC revision 6.0 Trying to install interrupt handler for IRQ400 Trying to install interrupt handler for IRQ401 Trying to install interrupt handler for IRQ402 Trying to install interrupt handler for IRQ403 Trying to install interrupt handler for IRQ404 Trying to install interrupt handler for IRQ405 Trying to install interrupt handler for IRQ406 Trying to install type control for IRQ407 Trying to set irq flags for IRQ407 OMAP clockevent source: GPTIMER1 at 27000000 Hz Console: colour dummy device 80x30 Calibrating delay loop... 986.31 BogoMIPS (lpj=4931584) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok devtmpfs: initialized omap_voltage_early_init: voltage driver support not added regulator: core version 0.5 regulator: dummy: NET: Registered protocol family 16 OMAP GPIO hardware version 0.1 OMAP GPIO hardware version 0.1 omap_mux_init: Add partition: #1: core, flags: 0 _omap_mux_get_by_name: Could not find signal i2c2_scl.i2c2_scl _omap_mux_get_by_name: Could not find signal i2c2_sda.i2c2_sda NOR: Can't request GPMC CS registered ti816x_vpss device registered ti816x_gpio_vr device registered TI816x on-chip HDMI device registered ti816x_sr device registered ti81xx_vidout device pm_dbg_init: only OMAP3 supported ti81xx_pcie: Invoking PCI BIOS... ti81xx_pcie: Setting up Host Controller... ti81xx_pcie: Register base mapped @0xd0820000 ti81xx_pcie: Starting PCI scan... PCI: bus0: Fast back to back transfers enabled bio: create slab at 0 regulator: VFB: 800 <--> 1025 mV at 1010 mV vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb registerd cppi-dma Intr @ IRQ 17 Cppi41 Init Done omap_i2c omap_i2c.1: bus 1 rev4.0 at 100 kHz omap_i2c omap_i2c.2: bus 2 rev4.0 at 100 kHz Advanced Linux Sound Architecture Driver Version 1.0.23. Switching to clocksource gp timer musb-hdrc: version 6.0, host, debug=0 musb-hdrc musb-hdrc.0: dma type: dma-cppi41 musb-hdrc: kernel must blacklist external hubs musb-hdrc musb-hdrc.0: MUSB HDRC host driver musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 1 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: MUSB HDRC host driver usb usb1: Manufacturer: Linux 2.6.37 musb-hcd usb usb1: SerialNumber: musb-hdrc.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected musb-hdrc musb-hdrc.0: USB Host mode controller at d081e000 using DMA, IRQ 18 musb-hdrc musb-hdrc.1: dma type: dma-cppi41 musb-hdrc: kernel must blacklist external hubs musb-hdrc musb-hdrc.1: MUSB HDRC host driver musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 2 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: MUSB HDRC host driver usb usb2: Manufacturer: Linux 2.6.37 musb-hcd usb usb2: SerialNumber: musb-hdrc.1 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected musb-hdrc musb-hdrc.1: USB Host mode controller at d0826800 using DMA, IRQ 19 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NetWinder Floating Point Emulator V0.97 (double precision) PMU: registered new PMU device of type 0 omap-iommu omap-iommu.0: ducati registered omap-iommu omap-iommu.1: sys registered JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. msgmni has been set to 397 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled omap_uart.0: ttyO0 at MMIO 0x48020000 (irq = 72) is a OMAP UART0 omap_uart.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1 omap_uart.2: ttyO2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2 console [ttyO2] enabled, bootconsole disabled console [ttyO2] enabled, bootconsole disabled brd: module loaded loop: module loaded ahci ahci.0: forcing PORTS_IMPL to 0x3 ahci ahci.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl platform mode ahci ahci.0: flags: ncq sntf pm led clo only pmp pio slum part ccc scsi0 : ahci_platform scsi1 : ahci_platform ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a150fff] port 0x100 irq 16 ata2: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a150fff] port 0x180 irq 16 m25p80 spi1.0: found m25p05-nonjedec, expected w25x32 m25p80 spi1.0: m25p05-nonjedec (64 Kbytes) Creating 4 MTD partitions on "spi_flash": 0x000000000000-0x000000040000 : "U-Boot" mtd: partition "U-Boot" extends beyond the end of device "spi_flash" -- size tru ncated to 0x10000 0x000000010000-0x000000012000 : "U-Boot Env" mtd: partition "U-Boot Env" is out of reach -- disabled 0x000000000000-0x000000280000 : "Kernel" mtd: partition "Kernel" extends beyond the end of device "spi_flash" -- size tru ncated to 0x10000 0x000000010000-0x000000010000 : "File System" mtd: partition "File System" is out of reach -- disabled omap2-nand driver initializing No NAND device found. No NAND device found. davinci_mdio davinci_mdio.0: davinci mdio revision 1.6 davinci_mdio davinci_mdio.0: detected phy mask fffffff9 davinci_mdio.0: probed davinci_mdio davinci_mdio.0: phy[1]: device 0:01, driver unknown davinci_mdio davinci_mdio.0: phy[2]: device 0:02, driver unknown usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver dm9601 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice omap_rtc omap_rtc: rtc core: registered omap_rtc as rtc0 i2c /dev entries driver Linux video capture interface: v2.00 usbcore: registered new interface driver uvcvideo USB Video Class driver (v1.0.0) OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec usbcore: registered new interface driver usbhid usbhid: USB HID core driver notify_init : notify drivercreated for remote proc id 2 at physical Address 0x bf900000 usbcore: registered new interface driver snd-usb-audio asoc: tlv320aic3x-hifi <-> davinci-mcasp.2 mapping ok ALSA device list: #0: TI81XX EVM TCP cubic registered NET: Registered protocol family 17 VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 omap_voltage_late_init: Voltage driver support not added Power Management for TI81XX. smartreflex smartreflex: Driver initialized omap_rtc omap_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) usb 2-1: new low speed USB device using musb-hdrc and address 2 mmc0: new high speed SDHC card at address f449 mmcblk0: mmc0:f449 SD08G 7.40 GiB mmcblk0: p1 p2 p3 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) EXT3-fs: barriers not enabled usb 2-1: New USB device found, idVendor=13ee, idProduct=0003 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: Optical Mouse usb 2-1: Manufacturer: MosArt input: MosArt Optical Mouse as /devices/platform/omap/ti81xx-usbss/musb-hdrc.1/u sb2/2-1/2-1:1.0/input/input0 generic-usb 0003:13EE:0003.0001: input: USB HID v1.10 Mouse [MosArt Optical Mous e] on usb-musb-hdrc.1-1/input0 kjournald starting. Commit interval 5 seconds EXT3-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is rec ommended EXT3-fs (mmcblk0p2): using internal journal EXT3-fs (mmcblk0p2): recovery complete EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) on device 179:2. devtmpfs: mounted Freeing init memory: 200K INIT: version 2.86 booting Please wait: booting... Error opening /dev/fb0: No such file or directory Starting udev udevd (69): /proc/69/oom_adj is deprecated, please use /proc/69/oom_score_adj in stead. EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (mmcblk0p3): warning: maximal mount count reached, running e2fsck is rec ommended EXT3-fs (mmcblk0p3): using internal journal EXT3-fs (mmcblk0p3): recovery complete EXT3-fs (mmcblk0p3): mounted filesystem with writeback data mode Remounting root file system... Caching udev devnodes NET: Registered protocol family 10 ALSA: Restoring mixer settings... Configuring network interfaces... davinci_mdio davinci_mdio.0: resetting idled c ontroller net eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, id=282f014) ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc (v1.13.2) started Sending discover... Sending discover... Sending discover... No lease, forking to background done. Setting up IP spoofing protection: rp_filter. Fri Dec 9 14:48:00 UTC 2011 INIT: Entering runlevel: 5 mkdir: cannot create directory '/var/volatile/cache': File exists mkdir: cannot create directory '/var/volatile/lock': File exists mkdir: cannot create directory '/var/volatile/log': File exists mkdir: cannot create directory '/var/volatile/run': File exists mkdir: cannot create directory '/var/volatile/tmp': File exists Loading HDVICP2 Firmware DM816X prcm_config_app version: 2.0.0.1 Doing PRCM settings... PRCM for IVHD0 is in Progress, Please wait..... BW Phy Addr : 0x48180600 Data : 0x00000002 AW Phy Addr : 0x48180600 Data : 0x00000002 Phy Addr : 0x48180c04 Data : 0x00000037 BW Phy Addr : 0x48180620 Data : 0x00070000 AW Phy Addr : 0x48180620 Data : 0x00070002 BW Phy Addr : 0x48180624 Data : 0x00030000 AW Phy Addr : 0x48180624 Data : 0x00010002 Phy Addr : 0x48180600 Data : 0x00000102 BW Phy Addr : 0x48180c10 Data : 0x00000007 AW Phy Addr : 0x48180c10 Data : 0x00000003 Phy Addr : 0x48180c14 Data : 0x00000004 BW Phy Addr : 0x58088000 Data : 0xde431afb AW Phy Addr : 0x58088000 Data : 0xeafffffe BW Phy Addr : 0x58098000 Data : 0x1290a2f5 AW Phy Addr : 0x58098000 Data : 0xeafffffe BW Phy Addr : 0x48180c10 Data : 0x00000003 AW Phy Addr : 0x48180c10 Data : 0x00000000 Phy Addr : 0x48180c14 Data : 0x00000007 PRCM for IVHD0 is Done Successfully PRCM for IVHD1 is in Progress, Please wait..... BW Phy Addr : 0x48180700 Data : 0x00000002 AW Phy Addr : 0x48180700 Data : 0x00000002 Phy Addr : 0x48180d04 Data : 0x00000037 BW Phy Addr : 0x48180720 Data : 0x00070000 AW Phy Addr : 0x48180720 Data : 0x00050002 BW Phy Addr : 0x48180724 Data : 0x00030000 AW Phy Addr : 0x48180724 Data : 0x00010002 Phy Addr : 0x48180700 Data : 0x00000102 BW Phy Addr : 0x48180d10 Data : 0x00000007 AW Phy Addr : 0x48180d10 Data : 0x00000003 Phy Addr : 0x48180d14 Data : 0x00000004 BW Phy Addr : 0x5a088000 Data : 0x1991543b AW Phy Addr : 0x5a088000 Data : 0xeafffffe BW Phy Addr : 0x5a098000 Data : 0x2e43d938 AW Phy Addr : 0x5a098000 Data : 0xeafffffe BW Phy Addr : 0x48180d10 Data : 0x00000003 AW Phy Addr : 0x48180d10 Data : 0x00000000 Phy Addr : 0x48180d14 Data : 0x00000007 PRCM for IVHD1 is Done Successfully PRCM for IVHD2 is in Progress, Please wait..... BW Phy Addr : 0x48180800 Data : 0x00000002 AW Phy Addr : 0x48180800 Data : 0x00000002 Phy Addr : 0x48180e04 Data : 0x00000037 BW Phy Addr : 0x48180820 Data : 0x00070000 AW Phy Addr : 0x48180820 Data : 0x00050002 BW Phy Addr : 0x48180824 Data : 0x00030000 AW Phy Addr : 0x48180824 Data : 0x00010002 Phy Addr : 0x48180800 Data : 0x00000102 BW Phy Addr : 0x48180e10 Data : 0x00000007 AW Phy Addr : 0x48180e10 Data : 0x00000003 Phy Addr : 0x48180e14 Data : 0x00000004 BW Phy Addr : 0x53088000 Data : 0xe620e9e9 AW Phy Addr : 0x53088000 Data : 0xeafffffe BW Phy Addr : 0x53098000 Data : 0xfb6d60d1 AW Phy Addr : 0x53098000 Data : 0xeafffffe BW Phy Addr : 0x48180e10 Data : 0x00000003 AW Phy Addr : 0x48180e10 Data : 0x00000000 Phy Addr : 0x48180e14 Data : 0x00000007 PRCM for IVHD2 is Done Successfully PRCM Initialization completed SysLink version : 2.00.05.85 SysLink module created on Date:Apr 10 2012 Time:14:38:19 FIRMWARE: Memory map bin file not passed Usage : firmware_loader [Loca tion of Mem map bin file] FIRMWARE: Default memory configuration is used MemCfg: DCMM (Dynamically Configurable Memory Map) Version : 2.1.1.1 FIRMWARE: Memory Configuration status : In Progress FIRMWARE: 1 start Successful Loading HDVPSS Firmware FIRMWARE: Memory map bin file not passed Usage : firmware_loader [Loca tion of Mem map bin file] FIRMWARE: Default memory configuration is used MemCfg: DCMM (Dynamically Configurable Memory Map) Version : 2.1.1.1 FIRMWARE: Memory Configuration status : In Progress FIRMWARE: 2 start Successful open /dev/fb0: No such file or directory HDMI W1 rev 2.0 Timing Info: pixel_clk = 148500 x_res = 1920 y_res = 1080 hfp = 88 hsw = 44 hbp = 148 vfp = 4 vsw = 5 vbp = 36 Starting telnet daemon. Starting syslogd/klogd: done Starting thttpd. Starting PVR PVR: PVRCore_Init PVR: PVRSRVDriverProbe(pDevice=bf212c98) PVR: EnableSystemClocks: Enabling System Clocks PVR: GPTIMER11 clock is 0MHz PVR: Setting GPTIMER11 mode to posted (currently is non-posted) PVR: OSUnMapPhysToLin: unmapping 4 bytes from fa048054 PVR: OSUnMapPhysToLin: unmapping 4 bytes from fa048038 PVR: PVRCore_Init: major device 250 /dev/mem opened. Memory mapped at address 0x40258000. Read at address 0x48180F04 (0x40258f04): 0x00000001 Write at address 0x48180F04 (0x40258f04): 0x00000000, readback 0x00000000 /dev/mem opened. Memory mapped at address 0x4006a000. Read at address 0x48180900 (0x4006a900): 0x00000102 Write at address 0x48180900 (0x4006a900): 0x00000002, readback 0x00000002 /dev/mem opened. Memory mapped at address 0x4006f000. Read at address 0x48180920 (0x4006f920): 0x00040002 Write at address 0x48180920 (0x4006f920): 0x00000002, readback 0x00000002 PVR: Installing MISR with cookie bf214358 PVR: Installing device LISR SGX ISR on IRQ 37 with cookie cbe3e900 PVR: OSUnMapPhysToLin: unmapping 65536 bytes from d55a0000 PVR_K:(Warning): SysFinalise: Version string: SGX revision = 1.2.5 [583, home/da nny/ezsdk/component-sources/graphics-sdk_4.04.00.02/GFX_Linux_KM/services4/syste m/ti81xx/sysconfig.c] PVR: PVR: Memory Stats PVR: ------------ PVR: PVR: High Water Mark = 0 bytes Starting Matrix GUI application. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dm816x-evm ttyO2 Arago 2011.09 dm816x-evm ttyO2 dm816x-evm login: root root@dm816x-evm:~# cd  lsmod Module Size Used by bufferclass_ti 4946 0 omaplfb 10730 0 pvrsrvkm 379412 2 bufferclass_ti,omaplfb ti81xxhdmi 14478 0 ti81xxfb 21771 3 vpss 72346 3 omaplfb,ti81xxhdmi,ti81xxfb syslink 1105475 0 ipv6 209855 12 root@dm816x-evm:~# ls /dev/fb? /dev/fb0 /dev/fb1 /dev/fb2 root@dm816x-evm:~# cd progs root@dm816x-evm:/media/mmcblk0p3/progs# ./stopgui Stopping Matrix GUI application. root@dm816x-evm:/media/mmcblk0p3/progs# . ./k skript3 Starting PVR insmod: error inserting '/lib/modules/2.6.37/kernel/drivers/char/pvrsrvkm.ko': - 1 File exists /dev/mem opened. Memory mapped at address 0x40109000. Read at address 0x48180F04 (0x40109f04): 0x00000000 Write at address 0x48180F04 (0x40109f04): 0x00000000, readback 0x00000000 /dev/mem opened. Memory mapped at address 0x4010b000. Read at address 0x48180900 (0x4010b900): 0x00000102 Write at address 0x48180900 (0x4010b900): 0x00000002, readback 0x00000002 /dev/mem opened. Memory mapped at address 0x4027e000. Read at address 0x48180920 (0x4027e920): 0x00000002 Write at address 0x48180920 (0x4027e920): 0x00000002, readback 0x00000002 PVR:(Error): SrvInit: PVRSRVInitSrvConnect failed (127) [56, /srvinit.c] [drm] Initialized drm 1.1.0 20060810 PVR:(Error): SrvInit: PVRSRVInitSrvConnect failed (127) [56, /srvinit.c] PVR:(Error): main: SrvInit failed (127) [47, main.c] root@dm816x-evm:/media/mmcblk0p3/progs# X.Org X Server 1.7.5 Release Date: 2010-02-16 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.35-30-generic-pae i686 Current Operating System: Linux dm816x-evm 2.6.37 #1 Tue Apr 10 14:25:59 CEST 20 12 armv7l Kernel command line: console=ttyO2,115200n8 rootwait root=/dev/mmcblk0p2 rw mem= 256M earlyprintk notifyk.vpssm3_sva=0xBF900000 vram=50M ti81xxfb.vram=0:16M,1:16 M,2:6M ip=off noinitrd Build Date: 28 September 2011 11:37:44PM Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/usr/local/XSGX/var/log/Xorg.0.log", Time: Fri Dec 9 14:48:55 2 011 (++) Using config file: "/usr/local/XSGX/etc/xorg.conf" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Screen" (0) (**) | |-->Monitor "" (**) | |-->Device "Video Device" (==) No monitor specified for screen "Screen". Using a default monitor configuration. (==) Not automatically adding devices (==) Not automatically enabling devices (WW) The directory "/usr/local/XSGX/share/fonts/X11/TTF/" does not exist. Entry deleted from font path. (WW) The directory "/usr/local/XSGX/share/fonts/X11/OTF" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/local/XSGX/share/fonts/X11/misc/, /usr/local/XSGX/share/fonts/X11/Type1/, /usr/local/XSGX/share/fonts/X11/100dpi/, /usr/local/XSGX/share/fonts/X11/75dpi/ (==) ModulePath set to "/usr/local/XSGX/lib/xorg/modules" (==) |-->Input Device "Main Touch Screen" (==) |-->Input Device "Keyboard" (==) No Layout section. Using the first core pointer device. (==) No Layout section. Using the first core keyboard device. (--) using VT number 2 (WW) xf86OpenConsole: setpgid failed: Operation not permitted (II) Loading /usr/local/XSGX/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.0.0 (II) Loading /usr/local/XSGX/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.0.0 (II) Loading /usr/local/XSGX/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.0.0 (==) AIGLX enabled (II) Loading /usr/local/XSGX/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.0.0 (II) Loading /usr/local/XSGX/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.1.0 (II) Loading /usr/local/XSGX/lib/xorg/modules/drivers/pvr_drv.so (II) Module PVR: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.6.4117 (II) Loading /usr/local/XSGX/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.5, module version = 2.3.3 (II) pvr: Driver for PowerVR chipsets: PowerVR SGX (WW) Falling back to old probe method for pvr (EE) Couldn't get PVR Services status (EE) No devices detected. Fatal server error: no screens found Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/usr/local/XSGX/var/log/Xorg.0.log" for addit ional information. root@dm816x-evm:/media/mmcblk0p3/progs# /uroot@dm816x-evm:/media/mmcblk0p3/progs# /usr/locroot@dm816x-evm:/media/mmcblk0p3/progs# /usr/local/bin/pvroot@dm816x-evm:/media/mmcblk0p3/progs# /usr/local/bin/pvrsroot@dm816x-evm:/media/mmcblk0p3/progs# /usr/local/bin/pvrsrvinit PVR:(Error): SrvInit: PVRSRVInitSrvConnect failed (127) [56, /srvinit.c] PVR:(Error): main: SrvInit failed (127) [47, main.c] root@dm816x-evm:/media/mmcblk0p3/progs# root@dm816x-evm:/media/mmcblk0p3/progs# /usr/local/bin/pvrsrvinit s/usr/local/bin/pvrsrvinit t/usr/local/bin/pvrsrvinit r/usr/local/bin/pvrsrvinit a/usr/local/bin/pvrsrvinit c/usr/local/bin/pvrsrvinit e/usr/local/bin/pvrsrvinit /usr/local/bin/pvrsrvinit /usr/local/bin/pvrsrvinit execve("/usr/local/bin/pvrsrvinit", ["/usr/local/bin/pvrsrvinit"], [/* 14 vars * /]) = 0 brk(0) = 0x11000 uname({sys="Linux", node="dm816x-evm", ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40 083000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/usr/local/XSGX/lib/tls/v7l/fast-mult/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/local/XSGX/lib/tls/v7l/fast-mult/half", 0xbec72350) = -1 ENOENT (No such file or directory) open("/usr/local/XSGX/lib/tls/v7l/fast-mult/libsrv_init.so", O_RDONLY) = -1 ENOE NT (No such file or directory) stat64("/usr/local/XSGX/lib/tls/v7l/fast-mult", 0xbec72350) = -1 ENOENT (No such file or directory) open("/usr/local/XSGX/lib/tls/v7l/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (N o such file or directory) stat64("/usr/local/XSGX/lib/tls/v7l/half", 0xbec72350) = -1 ENOENT (No such file or directory) open("/usr/local/XSGX/lib/tls/v7l/libsrv_init.so", O_RDONLY) = -1 ENOENT (No suc h file or directory) stat64("/usr/local/XSGX/lib/tls/v7l", 0xbec72350) = -1 ENOENT (No such file or d irectory) open("/usr/local/XSGX/lib/tls/fast-mult/half/libsrv_init.so", O_RDONLY) = -1 ENO ENT (No such file or directory) stat64("/usr/local/XSGX/lib/tls/fast-mult/half", 0xbec72350) = -1 ENOENT (No suc h file or directory) open("/usr/local/XSGX/lib/tls/fast-mult/libsrv_init.so", O_RDONLY) = -1 ENOENT ( No such file or directory) stat64("/usr/local/XSGX/lib/tls/fast-mult", 0xbec72350) = -1 ENOENT (No such fil e or directory) open("/usr/local/XSGX/lib/tls/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (No su ch file or directory) stat64("/usr/local/XSGX/lib/tls/half", 0xbec72350) = -1 ENOENT (No such file or directory) open("/usr/local/XSGX/lib/tls/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such fi le or directory) stat64("/usr/local/XSGX/lib/tls", 0xbec72350) = -1 ENOENT (No such file or direc tory) open("/usr/local/XSGX/lib/v7l/fast-mult/half/libsrv_init.so", O_RDONLY) = -1 ENO ENT (No such file or directory) stat64("/usr/local/XSGX/lib/v7l/fast-mult/half", 0xbec72350) = -1 ENOENT (No suc h file or directory) open("/usr/local/XSGX/lib/v7l/fast-mult/libsrv_init.so", O_RDONLY) = -1 ENOENT ( No such file or directory) stat64("/usr/local/XSGX/lib/v7l/fast-mult", 0xbec72350) = -1 ENOENT (No such fil e or directory) open("/usr/local/XSGX/lib/v7l/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (No su ch file or directory) stat64("/usr/local/XSGX/lib/v7l/half", 0xbec72350) = -1 ENOENT (No such file or directory) open("/usr/local/XSGX/lib/v7l/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such fi le or directory) stat64("/usr/local/XSGX/lib/v7l", 0xbec72350) = -1 ENOENT (No such file or direc tory) open("/usr/local/XSGX/lib/fast-mult/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/local/XSGX/lib/fast-mult/half", 0xbec72350) = -1 ENOENT (No such fi le or directory) open("/usr/local/XSGX/lib/fast-mult/libsrv_init.so", O_RDONLY) = -1 ENOENT (No s uch file or directory) stat64("/usr/local/XSGX/lib/fast-mult", 0xbec72350) = -1 ENOENT (No such file or directory) open("/usr/local/XSGX/lib/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such f ile or directory) stat64("/usr/local/XSGX/lib/half", 0xbec72350) = -1 ENOENT (No such file or dire ctory) open("/usr/local/XSGX/lib/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file o r directory) stat64("/usr/local/XSGX/lib", {st_mode=S_IFDIR|0755, st_size=12288, ...}) = 0 open("/lib/tls/v7l/fast-mult/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (No suc h file or directory) stat64("/lib/tls/v7l/fast-mult/half", 0xbec72350) = -1 ENOENT (No such file or d irectory) open("/lib/tls/v7l/fast-mult/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such fil e or directory) stat64("/lib/tls/v7l/fast-mult", 0xbec72350) = -1 ENOENT (No such file or direct ory) open("/lib/tls/v7l/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls/v7l/half", 0xbec72350) = -1 ENOENT (No such file or directory) open("/lib/tls/v7l/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or direc tory) stat64("/lib/tls/v7l", 0xbec72350) = -1 ENOENT (No such file or directory) open("/lib/tls/fast-mult/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such fi le or directory) stat64("/lib/tls/fast-mult/half", 0xbec72350) = -1 ENOENT (No such file or direc tory) open("/lib/tls/fast-mult/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls/fast-mult", 0xbec72350) = -1 ENOENT (No such file or directory) open("/lib/tls/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or dire ctory) stat64("/lib/tls/half", 0xbec72350) = -1 ENOENT (No such file or directory) open("/lib/tls/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or directory ) stat64("/lib/tls", 0xbec72350) = -1 ENOENT (No such file or directory) open("/lib/v7l/fast-mult/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such fi le or directory) stat64("/lib/v7l/fast-mult/half", 0xbec72350) = -1 ENOENT (No such file or direc tory) open("/lib/v7l/fast-mult/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/v7l/fast-mult", 0xbec72350) = -1 ENOENT (No such file or directory) open("/lib/v7l/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or dire ctory) stat64("/lib/v7l/half", 0xbec72350) = -1 ENOENT (No such file or directory) open("/lib/v7l/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or directory ) stat64("/lib/v7l", 0xbec72350) = -1 ENOENT (No such file or directory) open("/lib/fast-mult/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file o r directory) stat64("/lib/fast-mult/half", 0xbec72350) = -1 ENOENT (No such file or directory ) open("/lib/fast-mult/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or dir ectory) stat64("/lib/fast-mult", 0xbec72350) = -1 ENOENT (No such file or directory) open("/lib/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or director y) stat64("/lib/half", 0xbec72350) = -1 ENOENT (No such file or directory) open("/lib/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib", {st_mode=S_IFDIR|S_ISGID|0755, st_size=4096, ...}) = 0 open("/usr/lib/tls/v7l/fast-mult/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls/v7l/fast-mult/half", 0xbec72350) = -1 ENOENT (No such file or directory) open("/usr/lib/tls/v7l/fast-mult/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls/v7l/fast-mult", 0xbec72350) = -1 ENOENT (No such file or di rectory) open("/usr/lib/tls/v7l/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls/v7l/half", 0xbec72350) = -1 ENOENT (No such file or directo ry) open("/usr/lib/tls/v7l/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or d irectory) stat64("/usr/lib/tls/v7l", 0xbec72350) = -1 ENOENT (No such file or directory) open("/usr/lib/tls/fast-mult/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (No suc h file or directory) stat64("/usr/lib/tls/fast-mult/half", 0xbec72350) = -1 ENOENT (No such file or d irectory) open("/usr/lib/tls/fast-mult/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such fil e or directory) stat64("/usr/lib/tls/fast-mult", 0xbec72350) = -1 ENOENT (No such file or direct ory) open("/usr/lib/tls/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls/half", 0xbec72350) = -1 ENOENT (No such file or directory) open("/usr/lib/tls/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or direc tory) stat64("/usr/lib/tls", 0xbec72350) = -1 ENOENT (No such file or directory) open("/usr/lib/v7l/fast-mult/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (No suc h file or directory) stat64("/usr/lib/v7l/fast-mult/half", 0xbec72350) = -1 ENOENT (No such file or d irectory) open("/usr/lib/v7l/fast-mult/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such fil e or directory) stat64("/usr/lib/v7l/fast-mult", 0xbec72350) = -1 ENOENT (No such file or direct ory) open("/usr/lib/v7l/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/v7l/half", 0xbec72350) = -1 ENOENT (No such file or directory) open("/usr/lib/v7l/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or direc tory) stat64("/usr/lib/v7l", 0xbec72350) = -1 ENOENT (No such file or directory) open("/usr/lib/fast-mult/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such fi le or directory) stat64("/usr/lib/fast-mult/half", 0xbec72350) = -1 ENOENT (No such file or direc tory) open("/usr/lib/fast-mult/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/fast-mult", 0xbec72350) = -1 ENOENT (No such file or directory) open("/usr/lib/half/libsrv_init.so", O_RDONLY) = -1 ENOENT (No such file or dire ctory) stat64("/usr/lib/half", 0xbec72350) = -1 ENOENT (No such file or directory) open("/usr/lib/libsrv_init.so", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\300\7\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=176396, ...}) = 0 mmap2(NULL, 149424, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40 0cc000 mprotect(0x400d3000, 28672, PROT_NONE) = 0 mmap2(0x400da000, 94208, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRI TE, 3, 0x6) = 0x400da000 close(3) = 0 open("/usr/local/XSGX/lib/libsrv_um.so", O_RDONLY) = -1 ENOENT (No such file or directory) open("/lib/libsrv_um.so", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/lib/libsrv_um.so", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0()\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=765018, ...}) = 0 mmap2(NULL, 330864, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40 0f1000 mprotect(0x40139000, 28672, PROT_NONE) = 0 mmap2(0x40140000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRIT E, 3, 0x47) = 0x40140000 close(3) = 0 open("/usr/local/XSGX/lib/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file or di rectory) open("/lib/libdl.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0l\n\0\0004\0\0\0"..., 512 ) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=18080, ...}) = 0 mmap2(NULL, 49364, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x401 42000 mprotect(0x40146000, 28672, PROT_NONE) = 0 mmap2(0x4014d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRIT E, 3, 0x3) = 0x4014d000 close(3) = 0 open("/usr/local/XSGX/lib/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or dir ectory) open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\240Q\1\0004\0\0\0"..., 5 12) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1181160, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40 05c000 mmap2(NULL, 1217096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x4 014f000 mprotect(0x4026c000, 28672, PROT_NONE) = 0 mmap2(0x40273000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRI TE, 3, 0x11c) = 0x40273000 mmap2(0x40276000, 8776, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOU S, -1, 0) = 0x40276000 close(3) = 0 open("/lib/libm.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\0303\0\0004\0\0\0"..., 5 12) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=677560, ...}) = 0 mmap2(NULL, 708808, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40 279000 mprotect(0x4031e000, 28672, PROT_NONE) = 0 mmap2(0x40325000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRIT E, 3, 0xa4) = 0x40325000 close(3) = 0 open("/lib/libpthread.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\\C\0\0004\0\0\0"..., 512 ) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=88432, ...}) = 0 mmap2(NULL, 127492, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40 327000 mprotect(0x4033b000, 32768, PROT_NONE) = 0 mmap2(0x40343000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRIT E, 3, 0x14) = 0x40343000 mmap2(0x40345000, 4612, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOU S, -1, 0) = 0x40345000 close(3) = 0 open("/lib/librt.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\240\26\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=26572, ...}) = 0 mmap2(NULL, 57872, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x403 47000 mprotect(0x4034d000, 28672, PROT_NONE) = 0 mmap2(0x40354000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRIT E, 3, 0x5) = 0x40354000 close(3) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40 01a000 set_tls(0x4001a6b0, 0x4001ad80, 0x400cb67c, 0x4001ad88, 0x400cb050) = 0 mprotect(0x40354000, 4096, PROT_READ) = 0 mprotect(0x40343000, 4096, PROT_READ) = 0 mprotect(0x40325000, 4096, PROT_READ) = 0 mprotect(0x40273000, 8192, PROT_READ) = 0 mprotect(0x4014d000, 4096, PROT_READ) = 0 mprotect(0x400ca000, 4096, PROT_READ) = 0 set_tid_address(0x4001a258) = 1399 set_robust_list(0x4001a260, 0xc) = 0 futex(0xbec72d14, FUTEX_WAKE_PRIVATE, 1) = 0 rt_sigaction(SIGRTMIN, {0x4032b270, [], SA_SIGINFO|0x4000000}, NULL, 8) = 0 rt_sigaction(SIGRT_1, {0x4032ad28, [], SA_RESTART|SA_SIGINFO|0x4000000}, NULL, 8 ) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0 brk(0) = 0x11000 brk(0x32000) = 0x32000 open("/dev/pvrsrvkm", O_RDWR) = 3 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 ioctl(3, 0xc01c670c, 0xbec72a04) = 0 ioctl(3, 0xc01c6741, 0xbec72a54) = 0 fstat64(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(253, 2), ...}) = 0 ioctl(1, SNDCTL_TMR_TIMEBASE or SNDRV_TIMER_IOCTL_NEXT_DEVICE or TCGETS, {B11520 0 opost isig icanon echo ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40 356000 write(1, "PVR:(Error): SrvInit: PVRSRVInit"..., 73PVR:(Error): SrvInit: PVRSRVIn itSrvConnect failed (127) [56, /srvinit.c] ) = 73 write(1, "PVR:(Error): main: SrvInit faile"..., 53PVR:(Error): main: SrvInit fai led (127) [47, main.c] ) = 53 exit_group(1) = ? root@dm816x-evm:/media/mmcblk0p3/progs#