D:\work>python "HSDCPro Automation DLL ADC Example.py"
Connecting to board : K1226054-TSW1400
Error Status = 0
Selecting ADC Device : ADS5287
Error Status = 0
Using HSDC Ready function to check if the GUI is Ready...
Error Status = 0
Passing ADC Output Data Rate = 40000000
Error Status = 0
Starting normal capture..
Error Status = 0
Disconnecting from the board
Error Status = 0
Importing data from CSV file at C:/HSDCPro Data/Testdata.csv
Error Status = 7006
Importing data from Binary file at C:/HSDCPro Data/TestBinary.bin
Error Status = 7006
Saving ADC Raw Data as CSV file at C:/HSDCPro Data/ADCdata.csv
Error Status = 0
Saving ADC Raw Data as Binary file at C:/HSDCPro Data/ADCdata.bin
Error Status = 0
Setting Additional Device Parameters..
Error Status = 0
Selecting Single Tone in ADC Test Selection..
Error Status = 0
Getting the Single Tone Parameter Values : SNR;SFDR;THD;SINAD;ENOB;Fund.;Next Sp
ur;HD2;HD3;HD4;HD5;NSD/Hz
Error Status = 0
The Parameter Values are:
[57.572, 82.787, 75.328, 57.55, 9.267, -80.966, -84.684, -82.368, -86.209, -84.1
58, -88.81, -130.573]
Selecting Two Tone in ADC Test Selection..
Error Status = 0
Setting Unit and Nyquist for Two Tone..
Error Status = 0
Getting the Two Tone Parameter Values : F1;F2;2F1+F2;2F2+F1;2F1-F2;2F2-F1;3F2-2F
1;3F1-2F2;F1+F2;F1-F2;3F1;3F2;2F1+2F2
Error Status = 0
The Parameter Values are:
[610.352, 0.0, 610.352, 610.352, 610.352, 610.352, 610.352, 610.352, 610.352, 61
0.352, 610.352, 610.352, 610.352]