U-Boot SPL 2016.05-ge4a859e-dirty (Nov 06 2019 - 13:16:29) DRA752-GP ES2.0 no pinctrl for hs200_1_8v no pinctrl for ddr_1_8v ** First descriptor is NOT a primary desc on 1:1 ** Trying to boot from MMC1 reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2016.05-ge4a859e-dirty (Nov 06 2019 - 13:16:29 +0800) CPU : DRA752-GP ES2.0 Model: TI DRA742 Board: DRA74x EVM REV DRAM: 1 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 ** First descriptor is NOT a primary desc on 1:1 ** Warning: fastboot.board_rev: unknown board revision SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: Could not get PHY for cpsw: addr 2 cpsw Hit any key to stop autoboot: 0 ** Bad device mmc 0 ** reading /zImage 3561128 bytes read in 160 ms (21.2 MiB/s) Kernel image @ 0x82000000 [ 0x000000 - 0x3656a8 ] ERROR: Did not find a cmdline Flattened Device Tree Could not find a valid device tree => fatload mmc 0:1 0x88000000 /dra7-evm-infoadas.dtb;fatload mmc 0:1 0x82000000 /zImage;bootz 0x82000000 - 0x88000000 reading /dra7-evm-infoadas.dtb 106465 bytes read in 9 ms (11.3 MiB/s) reading /zImage 3561128 bytes read in 159 ms (21.4 MiB/s) Kernel image @ 0x82000000 [ 0x000000 - 0x3656a8 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe3000, end 8fffffe0 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.84-00034-gaa42c96-dirty (ldf@ubuntu) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #82 SMP PREEMPT Thu Nov 28 19:56:20 ULAT 2019 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA742 [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000040300000 , size 3 MiB [ 0.000000] Reserved memory: initialized node cmem@40300000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000 , size 80 MiB [ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009e000000 , size 32 MiB [ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a1000000 , size 32 MiB [ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a3000000 , size 32 MiB [ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a9000000 , size 32 MiB [ 0.000000] Reserved memory: initialized node cmem@A9000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x00000000be400000 [ 0.000000] Forcing write-allocate cache policy for SMP [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x00000000bfd00000 to fe600000 for dram barrier [ 0.000000] DRA752 ES2.0 [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef62b000 s14912 r8192 d21952 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251456 [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ mmcblk0p2 rootwait mem=1024M [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 394148K/1012736K available (6639K kernel code, 316K rwdata, 2396K rodata, 336K init, 290K bss, 413788K reserved, 204800K cma- reserved, 234496K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08db02c (9037 kB) [ 0.000000] .init : 0xc08dc000 - 0xc0930000 ( 336 kB) [ 0.000000] .data : 0xc0930000 - 0xc097f2e0 ( 317 kB) [ 0.000000] .bss : 0xc0981000 - 0xc09c9840 ( 291 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000016] Switching to timer-based delay loop, resolution 162ns [ 0.000326] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000334] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000768] Console: colour dummy device 80x30 [ 0.000790] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000802] pid_max: default: 32768 minimum: 301 [ 0.000901] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000911] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001452] Initializing cgroup subsys io [ 0.001469] Initializing cgroup subsys memory [ 0.001493] Initializing cgroup subsys devices [ 0.001506] Initializing cgroup subsys freezer [ 0.001517] Initializing cgroup subsys perf_event [ 0.001529] Initializing cgroup subsys pids [ 0.001555] CPU: Testing write buffer coherency: ok [ 0.001751] /cpus/cpu@0 missing clock-frequency property [ 0.001767] /cpus/cpu@1 missing clock-frequency property [ 0.001777] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001812] Setting up static identity map for 0x80008380 - 0x800083e0 [ 0.039863] [ 0.039863] 1 kernel/workqueue.c,init_workqueues,line=5351 [ 0.039881] [ 0.039881] 2 system_power_efficient_wq=0xef05ca00, kernel/workqueue.c, init_workqueues,line=5355 [ 0.080051] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.080120] Brought up 2 CPUs [ 0.080132] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.080139] CPU: All CPU(s) started in HYP mode. [ 0.080144] CPU: Virtualization extensions available. [ 0.080518] devtmpfs: initialized [ 0.108880] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.109822] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.214821] omap_hwmod: rtcss: no dt node [ 0.214830] ------------[ cut here ]------------ [ 0.214843] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c: 2523 _init.constprop.23+0x200/0x428() [ 0.214850] omap_hwmod: rtcss: doesn't have mpu register target base [ 0.214856] Modules linked in: [ 0.214870] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.84-00034-gaa42c96 -dirty #82 [ 0.214878] Hardware name: Generic DRA74X (Flattened Device Tree) [ 0.214885] Backtrace: [ 0.214906] [] (dump_backtrace) from [] (show_stack+ 0x18/0x1c) [ 0.214913] r7:c08e9034 r6:60000013 r5:00000000 r4:c094f810 [ 0.214942] [] (show_stack) from [] (dump_stack+0x8c/ 0xa0) [ 0.214954] [] (dump_stack) from [] ( warn_slowpath_common+0x88/0xb8) [ 0.214961] r7:c08e9034 r6:000009db r5:00000009 r4:ef063e58 [ 0.214984] [] (warn_slowpath_common) from [] ( warn_slowpath_fmt+0x38/0x40) [ 0.214991] r8:000000ab r7:ef1e3bc0 r6:00000000 r5:00000000 r4:c081946c [ 0.215016] [] (warn_slowpath_fmt) from [] (_init. constprop.23+0x200/0x428) [ 0.215022] r3:c081b028 r2:c081946c [ 0.215033] r4:c093d8e0 [ 0.215045] [] (_init.constprop.23) from [] ( __omap_hwmod_setup_all+0x48/0x98) [ 0.215052] r10:00000000 r9:c08dc600 r8:000000ab r7:ef1e3bc0 r6:c09356f0 r5:c0937b78 [ 0.215074] r4:c093d8e0 [ 0.215086] [] (__omap_hwmod_setup_all) from [] ( do_one_initcall+0x98/0x1e4) [ 0.215093] r5:c08e9344 r4:c09356f0 [ 0.215110] [] (do_one_initcall) from [] ( kernel_init_freeable+0x1d4/0x268) [ 0.215116] r10:00000002 r9:c08dc600 r8:000000ab r7:c091d820 r6:c092b280 r5:c0981000 [ 0.215136] r4:c0981000 [ 0.215151] [] (kernel_init_freeable) from [] ( kernel_init+0x18/0xf4) [ 0.215157] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c067cfd0 [ 0.215177] r4:c0981000 [ 0.215190] [] (kernel_init) from [] (ret_from_fork+ 0x14/0x2c) [ 0.215196] r5:c067cfd0 r4:00000000 [ 0.215219] ---[ end trace 03aaaf683b763f98 ]--- [ 0.312603] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.312625] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.316841] pinctrl core: initialized pinctrl subsystem [ 0.317700] NET: Registered protocol family 16 [ 0.318588] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.340207] cpuidle: using governor ladder [ 0.370234] cpuidle: using governor menu [ 0.378718] OMAP GPIO hardware version 0.1 [ 0.385197] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@ 1400 ! [ 0.401747] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.401760] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.410441] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.410451] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.410916] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.410925] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.411507] OMAP DMA hardware revision 0.0 [ 0.451679] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.452849] edma 43300000.edma: memcpy is disabled [ 0.457656] edma 43300000.edma: TI EDMA DMA engine driver [ 0.462214] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.462399] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.462561] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.462721] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.463006] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.463193] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.464791] [ 0.464791] ******************* come static int __init phy_init(void) ************* [ 0.464802] [ 0.464802] drivers/net/phy/phy_device.c,phy_init,line=1853 [ 0.464860] [ 0.464860] ret=0, drivers/net/phy/mdio_bus.c,mdio_bus_init,line=700 [ 0.464869] [ 0.464869] !!!!!!!!!!!! 2 ret=0 mdio_bus_init(void) ldf add !!!!!!!!!!!!!!!!!! [ 0.464876] [ 0.464876] drivers/net/phy/mdio_bus.c,mdio_bus_init,line=709 [ 0.464918] [ 0.464918] **********Generic PHY retval = 0, Registered new driver,drivers /net/phy/phy_device.c,phy_driver_register,line=1478 [ 0.464957] [ 0.464957] **********Generic 10G PHY retval = 0, Registered new driver, drivers/net/phy/phy_device.c,phy_driver_register,line=1478 [ 0.464965] [ 0.464965] rc=0 drivers/net/phy/phy_device.c,phy_init,line=1862 [ 0.466287] palmas 0-0058: IRQ missing: skipping irq request [ 0.481440] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 0.566033] pcf857x: probe of 0-0020 failed with error -121 [ 0.566360] pcf857x: probe of 0-0021 failed with error -121 [ 0.566519] omap_i2c 48070000.i2c: bus 0 rev0.12 at 100 kHz [ 0.566927] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 0.567294] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 100 kHz [ 0.567659] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 100 kHz [ 0.567853] media: Linux media interface: v0.10 [ 0.567903] Linux video capture interface: v2.00 [ 0.567941] pps_core: LinuxPPS API ver. 1 registered [ 0.567948] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.567970] PTP clock support registered [ 0.568019] EDAC MC: Ver: 3.0.0 [ 0.568767] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.569059] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.569415] Advanced Linux Sound Architecture Driver Initialized. [ 0.570244] clocksource: Switched to clocksource arch_sys_counter [ 0.581010] NET: Registered protocol family 2 [ 0.581506] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.581569] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.581695] TCP: Hash tables configured (established 8192 bind 8192) [ 0.581742] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.581772] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.581981] NET: Registered protocol family 1 [ 0.582247] RPC: Registered named UNIX socket transport module. [ 0.582257] RPC: Registered udp transport module. [ 0.582263] RPC: Registered tcp transport module. [ 0.582270] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.583216] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.593235] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.593892] NFS: Registering the id_resolver key type [ 0.593921] Key type id_resolver registered [ 0.593929] Key type id_legacy registered [ 0.593999] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.595302] bounce: pool size: 64 pages [ 0.595458] Block layer SCSI generic (bsg) driver version 0.4 loaded ( major 247) [ 0.595475] io scheduler noop registered [ 0.595489] io scheduler deadline registered [ 0.595526] io scheduler cfq registered (default) [ 0.600457] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.603582] PCI host bridge /ocp/axi@0/pcie_rc@51000000 ranges: [ 0.603594] No bus range found for /ocp/axi@0/pcie_rc@51000000, using [ bus 00-ff] [ 0.603627] IO 0x20003000..0x20012fff -> 0x00000000 [ 0.603648] MEM 0x20013000..0x2fffffff -> 0x20013000 [ 0.633645] dra7-pcie 51000000.pcie_rc: link is not up [ 0.633806] dra7-pcie 51000000.pcie_rc: PCI host bridge to bus 0000:00 [ 0.633819] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.633830] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.633839] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 0.634242] PCI: bus0: Fast back to back transfers disabled [ 0.634359] PCI: bus1: Fast back to back transfers enabled [ 0.634439] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 0.634454] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 0.634467] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.634688] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 0.694636] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.698030] console [ttyS0] disabled [ 0.698082] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 301, base_baud = 3000000) is a 8250 [ 1.994784] console [ttyS0] enabled [ 1.999172] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 302, base_baud = 3000000) is a 8250 [ 2.008867] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 303, base_baud = 3000000) is a 8250 [ 2.018927] [drm] Initialized drm 1.1.0 20060810 [ 2.024481] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.031166] [drm] No driver support for vblank timestamp query. [ 2.037299] [drm] Initialized vdrm 1.0.0 20110917 on minor 0 [ 2.130731] loop: module loaded [ 2.134324] [camera_vsync_probe:66] [camera_vsync_probe:80] [ camera_vsync_hrtimer_start:46] [ 2.145850] vmemexp device MAJOR num = 245 [ 2.150156] vmemexp class registered [ 2.153889] /dev/vmemexp device registered [ 2.158004] ioctl DBUFIOC_EXPORT_VIRTMEM = -1072899120 [ 2.163686] nand: No NAND device found [ 2.167456] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch [ 2.177249] m25p80 spi32766.0: unrecognized JEDEC id bytes: 00, 0, 0 [ 2.184193] [ 2.184193] **********SMSC LAN83C185 retval = 0, Registered new driver, drivers/net/phy/phy_device.c,phy_driver_register,line=1478 [ 2.197436] [ 2.197436] **********SMSC LAN8187 retval = 0, Registered new driver, drivers/net/phy/phy_device.c,phy_driver_register,line=1478 [ 2.210500] [ 2.210500] **********SMSC LAN8700 retval = 0, Registered new driver, drivers/net/phy/phy_device.c,phy_driver_register,line=1478 [ 2.223557] [ 2.223557] **********SMSC LAN911x Internal PHY retval = 0, Registered new driver,drivers/net/phy/phy_device.c,phy_driver_register,line=1478 [ 2.237754] [ 2.237754] **********SMSC LAN8710/LAN8720 retval = 0, Registered new driver,drivers/net/phy/phy_device.c,phy_driver_register,line=1478 [ 2.251517] [ 2.251517] **********RTL9000A PHY retval = 0, Registered new driver, drivers/net/phy/phy_device.c,phy_driver_register,line=1478 [ 2.264576] [ 2.264576] **********RTL8201CP Ethernet retval = 0, Registered new driver, drivers/net/phy/phy_device.c,phy_driver_register,line=1478 [ 2.278159] [ 2.278159] **********RTL8211B Gigabit Ethernet retval = 0, Registered new driver,drivers/net/phy/phy_device.c,phy_driver_register,line=1478 [ 2.292355] [ 2.292355] **********RTL8211DN Gigabit Ethernet retval = 0, Registered new driver,drivers/net/phy/phy_device.c,phy_driver_register,line=1478 [ 2.306633] [ 2.306633] **********RTL8211E Gigabit Ethernet retval = 0, Registered new driver,drivers/net/phy/phy_device.c,phy_driver_register,line=1478 [ 2.320833] [ 2.320833] **********RTL8211F Gigabit Ethernet retval = 0, Registered new driver,drivers/net/phy/phy_device.c,phy_driver_register,line=1478 [ 2.335201] [ 2.335201] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.345874] [ 2.345874] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.357678] [ 2.357678] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.368350] [ 2.368350] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.380154] [ 2.380154] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.390822] [ 2.390822] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.402624] [ 2.402624] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.413293] [ 2.413293] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.425099] [ 2.425099] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.435765] [ 2.435765] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.447567] [ 2.447567] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.458241] [ 2.458241] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.470046] [ 2.470046] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.480714] [ 2.480714] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.492516] [ 2.492516] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.503186] [ 2.503186] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.514990] [ 2.514990] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.525657] [ 2.525657] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.537456] [ 2.537456] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.548126] [ 2.548126] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.559929] [ 2.559929] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.570598] [ 2.570598] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.582404] [ 2.582404] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.593072] [ 2.593072] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.604876] [ 2.604876] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.615542] [ 2.615542] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.627343] [ 2.627343] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.638011] [ 2.638011] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.649815] [ 2.649815] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.660481] [ 2.660481] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.672282] [ 2.672282] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.682952] [ 2.682952] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.694757] [ 2.694757] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.705424] [ 2.705424] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.717228] [ 2.717228] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.727899] [ 2.727899] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.739700] [ 2.739700] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.750369] [ 2.750369] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.762169] [ 2.762169] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.772838] [ 2.772838] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.784643] [ 2.784643] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.795311] [ 2.795311] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.807111] [ 2.807111] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.817779] [ 2.817779] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.829583] [ 2.829583] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.840253] [ 2.840253] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.852054] [ 2.852054] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.862725] [ 2.862725] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.874530] [ 2.874530] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.885198] [ 2.885198] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.897000] [ 2.897000] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.907670] [ 2.907670] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.919472] [ 2.919472] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.930140] [ 2.930140] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.941940] [ 2.941940] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.952613] [ 2.952613] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.964413] [ 2.964413] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.975084] [ 2.975084] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 2.986886] [ 2.986886] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 2.997557] [ 2.997557] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 3.009360] [ 3.009360] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 3.020022] [ 3.020022] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 3.031825] [ 3.031825] --1 got MII_PHYSID1 phy id:ffff0000 drivers/net/phy/ phy_device.c,get_phy_id,line=356 [ 3.042530] [ 3.042530] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:ffffffff drivers/net /phy/phy_device.c,get_phy_id,line=364 [ 3.054336] libphy: [ 3.054336] ****** Fixed MDIO Bus: probed add flag ***** [ 3.061866] [ 3.061866] ERR drivers/net/phy/mdio_bus.c,__mdiobus_register,line=294 [ 3.070120] [ 3.070120] **********TI DP83848C 10/100 Mbps PHY retval = 0, Registered new driver,drivers/net/phy/phy_device.c,phy_driver_register,line=1478 [ 3.084492] [ 3.084492] **********NS DP83848C 10/100 Mbps PHY retval = 0, Registered new driver,drivers/net/phy/phy_device.c,phy_driver_register,line=1478 [ 3.098862] [ 3.098862] **********TI TLK10X 10/100 Mbps PHY retval = 0, Registered new driver,drivers/net/phy/phy_device.c,phy_driver_register,line=1478 [ 3.113059] [ 3.113059] **********TI DP83822 10/100 Mbps PHY retval = 0, Registered new driver,drivers/net/phy/phy_device.c,phy_driver_register,line=1478 [ 3.127347] [ 3.127347] **********TI DP83867 retval = 0, Registered new driver,drivers/ net/phy/phy_device.c,phy_driver_register,line=1478 [ 3.140250] [ 3.140250] **********Atheros 8035 ethernet retval = 0, Registered new driver,drivers/net/phy/phy_device.c,phy_driver_register,line=1478 [ 3.154096] [ 3.154096] **********Atheros 8030 ethernet retval = 0, Registered new driver,drivers/net/phy/phy_device.c,phy_driver_register,line=1478 [ 3.167942] [ 3.167942] **********Atheros 8031 ethernet retval = 0, Registered new driver,drivers/net/phy/phy_device.c,phy_driver_register,line=1478 [ 3.182796] cpsw 48484000.ethernet: [ 3.182796] !!!! *************************** This is LDF DEBUG _1 ***************** !!!!! [ 3.240272] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 3.246397] davinci_mdio 48485000.mdio: detected phy mask fffffffc [ 3.253523] [ 3.253523] --1 got MII_PHYSID1 phy id:1c0000 drivers/net/phy/phy_device .c,get_phy_id,line=356 [ 3.264960] [ 3.264960] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:1ccb00 drivers/net/ phy/phy_device.c,get_phy_id,line=364 [ 3.276589] [ 3.276589] drivers/net/phy/phy_device.c,phy_device_create,line=169 [ 3.284815] [ 3.284815] drivers/net/phy/phy_device.c,phy_device_create,line=192 [ 3.293047] [ 3.293047] drivers/net/phy/phy_device.c,phy_device_create,line=202 [ 3.301521] [ 3.301521] drivers/net/phy/phy_device.c,phy_device_create,line=221 [ 3.309818] [ 3.309818] 4 (phydrv->phy_id & phydrv->phy_id_mask)=0xffffffff, [ 3.309818] (phydev->phy_id & phydrv->phy_id_mask)=0x1ccb00, drivers/net/ phy/mdio_bus.c,mdio_bus_match,line=522 [ 3.327851] [ 3.327851] NOT EQU drivers/net/phy/mdio_bus.c,mdio_bus_match,line=526 [ 3.336112] [ 3.336112] 4 (phydrv->phy_id & phydrv->phy_id_mask)=0xffffffff, [ 3.336112] (phydev->phy_id & phydrv->phy_id_mask)=0x1ccb00, drivers/net/ phy/mdio_bus.c,mdio_bus_match,line=522 [ 3.354152] [ 3.354152] NOT EQU drivers/net/phy/mdio_bus.c,mdio_bus_match,line=526 [ 3.362739] [ 3.362739] 4 (phydrv->phy_id & phydrv->phy_id_mask)=0x7c0a0, [ 3.362739] (phydev->phy_id & phydrv->phy_id_mask)=0x1ccb00, drivers/net/ phy/mdio_bus.c,mdio_bus_match,line=522 [ 3.380507] [ 3.380507] NOT EQU drivers/net/phy/mdio_bus.c,mdio_bus_match,line=526 [ 3.388731] [ 3.388731] 4 (phydrv->phy_id & phydrv->phy_id_mask)=0x7c0b0, [ 3.388731] (phydev->phy_id & phydrv->phy_id_mask)=0x1ccb00, drivers/net/ phy/mdio_bus.c,mdio_bus_match,line=522 [ 3.406467] [ 3.406467] NOT EQU drivers/net/phy/mdio_bus.c,mdio_bus_match,line=526 [ 3.414694] [ 3.414694] 4 (phydrv->phy_id & phydrv->phy_id_mask)=0x7c0c0, [ 3.414694] (phydev->phy_id & phydrv->phy_id_mask)=0x1ccb00, drivers/net/ phy/mdio_bus.c,mdio_bus_match,line=522 [ 3.432432] [ 3.432432] NOT EQU drivers/net/phy/mdio_bus.c,mdio_bus_match,line=526 [ 3.440661] [ 3.440661] 4 (phydrv->phy_id & phydrv->phy_id_mask)=0x7c0d0, [ 3.440661] (phydev->phy_id & phydrv->phy_id_mask)=0x1ccb00, drivers/net/ phy/mdio_bus.c,mdio_bus_match,line=522 [ 3.458392] [ 3.458392] NOT EQU drivers/net/phy/mdio_bus.c,mdio_bus_match,line=526 [ 3.466617] [ 3.466617] 4 (phydrv->phy_id & phydrv->phy_id_mask)=0x7c0f0, [ 3.466617] (phydev->phy_id & phydrv->phy_id_mask)=0x1ccb00, drivers/net/ phy/mdio_bus.c,mdio_bus_match,line=522 [ 3.484351] [ 3.484351] NOT EQU drivers/net/phy/mdio_bus.c,mdio_bus_match,line=526 [ 3.492581] [ 3.492581] 4 (phydrv->phy_id & phydrv->phy_id_mask)=0x1ccb00, [ 3.492581] (phydev->phy_id & phydrv->phy_id_mask)=0x1ccb00, drivers/net/ phy/mdio_bus.c,mdio_bus_match,line=522 [ 3.510406] [ 3.510406] EQU drivers/net/phy/mdio_bus.c,mdio_bus_match,line=524 [ 3.518297] [ 3.518297] PHY 0 SUCCESS to add,drivers/net/phy/phy_device.c, phy_device_register,line=424 [ 3.529419] [ 3.529419] --1 got MII_PHYSID1 phy id:1c0000 drivers/net/phy/phy_device .c,get_phy_id,line=356 [ 3.540859] [ 3.540859] --2 got MII_PHYSID1 & MII_PHYSID2 phy id:1ccb00 drivers/net/ phy/phy_device.c,get_phy_id,line=364 [ 3.552487] [ 3.552487] drivers/net/phy/phy_device.c,phy_device_create,line=169 [ 3.560712] [ 3.560712] drivers/net/phy/phy_device.c,phy_device_create,line=192 [ 3.568933] [ 3.568933] drivers/net/phy/phy_device.c,phy_device_create,line=202 [ 3.577301] [ 3.577301] drivers/net/phy/phy_device.c,phy_device_create,line=221 [ 3.585627] [ 3.585627] 4 (phydrv->phy_id & phydrv->phy_id_mask)=0xffffffff, [ 3.585627] (phydev->phy_id & phydrv->phy_id_mask)=0x1ccb00, drivers/net/ phy/mdio_bus.c,mdio_bus_match,line=522 [ 3.603646] [ 3.603646] NOT EQU drivers/net/phy/mdio_bus.c,mdio_bus_match,line=526 [ 3.611907] [ 3.611907] 4 (phydrv->phy_id & phydrv->phy_id_mask)=0xffffffff, [ 3.611907] (phydev->phy_id & phydrv->phy_id_mask)=0x1ccb00, drivers/net/ phy/mdio_bus.c,mdio_bus_match,line=522 [ 3.629933] [ 3.629933] NOT EQU drivers/net/phy/mdio_bus.c,mdio_bus_match,line=526 [ 3.638188] [ 3.638188] 4 (phydrv->phy_id & phydrv->phy_id_mask)=0x7c0a0, [ 3.638188] (phydev->phy_id & phydrv->phy_id_mask)=0x1ccb00, drivers/net/ phy/mdio_bus.c,mdio_bus_match,line=522 [ 3.656313] [ 3.656313] NOT EQU drivers/net/phy/mdio_bus.c,mdio_bus_match,line=526 [ 3.664546] [ 3.664546] 4 (phydrv->phy_id & phydrv->phy_id_mask)=0x7c0b0, [ 3.664546] (phydev->phy_id & phydrv->phy_id_mask)=0x1ccb00, drivers/net/ phy/mdio_bus.c,mdio_bus_match,line=522 [ 3.682281] [ 3.682281] NOT EQU drivers/net/phy/mdio_bus.c,mdio_bus_match,line=526 [ 3.690507] [ 3.690507] 4 (phydrv->phy_id & phydrv->phy_id_mask)=0x7c0c0, [ 3.690507] (phydev->phy_id & phydrv->phy_id_mask)=0x1ccb00, drivers/net/ phy/mdio_bus.c,mdio_bus_match,line=522 [ 3.708244] [ 3.708244] NOT EQU drivers/net/phy/mdio_bus.c,mdio_bus_match,line=526 [ 3.716472] [ 3.716472] 4 (phydrv->phy_id & phydrv->phy_id_mask)=0x7c0d0, [ 3.716472] (phydev->phy_id & phydrv->phy_id_mask)=0x1ccb00, drivers/net/ phy/mdio_bus.c,mdio_bus_match,line=522 [ 3.734206] [ 3.734206] NOT EQU drivers/net/phy/mdio_bus.c,mdio_bus_match,line=526 [ 3.742434] [ 3.742434] 4 (phydrv->phy_id & phydrv->phy_id_mask)=0x7c0f0, [ 3.742434] (phydev->phy_id & phydrv->phy_id_mask)=0x1ccb00, drivers/net/ phy/mdio_bus.c,mdio_bus_match,line=522 [ 3.760170] [ 3.760170] NOT EQU drivers/net/phy/mdio_bus.c,mdio_bus_match,line=526 [ 3.768400] [ 3.768400] 4 (phydrv->phy_id & phydrv->phy_id_mask)=0x1ccb00, [ 3.768400] (phydev->phy_id & phydrv->phy_id_mask)=0x1ccb00, drivers/net/ phy/mdio_bus.c,mdio_bus_match,line=522 [ 3.786225] [ 3.786225] EQU drivers/net/phy/mdio_bus.c,mdio_bus_match,line=524 [ 3.794130] [ 3.794130] PHY 1 SUCCESS to add,drivers/net/phy/phy_device.c, phy_device_register,line=424 [ 3.803931] libphy: [ 3.803931] ****** 48485000.mdio: probed add flag ***** [ 3.811376] [ 3.811376] ERR drivers/net/phy/mdio_bus.c,__mdiobus_register,line=294 [ 3.819594] davinci_mdio 48485000.mdio: [ 3.819594] [ 3.819594] phy[0]: device 48485000.mdio:00, driver RTL9000A PHY,addr=0 drivers/net/ethernet/ti/davinci_mdio.c,davinci_mdio_probe,line=495 [ 3.837594] davinci_mdio 48485000.mdio: [ 3.837594] [ 3.837594] phy[1]: device 48485000.mdio:01, driver RTL9000A PHY,addr=1 drivers/net/ethernet/ti/davinci_mdio.c,davinci_mdio_probe,line=495 [ 3.855951] [ 3.855951] **********drivers/net/ethernet/ti/cpsw-phy-sel.c, cpsw_phy_sel_probe,line=204 [ 3.865855] cpsw 48484000.ethernet: Detected MACID = f8:36:9b:bf:b6:a2 [ 3.872522] cpsw 48484000.ethernet: cpts: overflow check period 800 [ 3.879475] cpsw 48484000.ethernet: cpsw: Detected MACID = f8:36:9b:bf:b6:a3 [ 3.888119] mousedev: PS/2 mouse device common for all mice [ 3.904338] i2c /dev entries driver [ 3.913229] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.918061] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr104 mode [ 3.924555] omap_hsmmc 4809c000.mmc: no pinctrl state for ddr50 mode [ 3.930954] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr50 mode [ 3.937343] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr25 mode [ 3.943741] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr12 mode [ 4.000784] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 4.007170] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 4.030389] evm_3v3_sw: supplied by sysen1 [ 4.071068] ledtrig-cpu: registered to indicate activity on CPUs [ 4.081190] aic_dvdd: supplied by evm_3v3_sw [ 4.087103] davinci-mcasp 4847c000.mcasp: invalid tdm slots: 0 [ 4.094600] NET: Registered protocol family 10 [ 4.109879] sit: IPv6 over IPv4 tunneling driver [ 4.115094] NET: Registered protocol family 17 [ 4.119763] Key type dns_resolver registered [ 4.124166] omap_voltage_late_init: Voltage driver support not added [ 4.131056] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 4.137265] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 4.143531] ti_oppdm 4a003b20.oppdm: Unable to get vdd regulator:-517 [ 4.150127] Power Management for TI OMAP4+ devices. [ 4.155260] Registering SWP/SWPB emulation handler [ 4.161360] dmm 4e000000.dmm: workaround for errata i878 in use [ 4.168840] dmm 4e000000.dmm: initialized all PAT entries [ 4.175277] [drm] Initialized omapdrm 1.0.0 20110917 on minor 1 [ 4.193316] asoc-simple-card sound0: tlv320aic3x-hifi <-> 48468000.mcasp mapping ok [ 4.213058] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 4.217163] mmc0: host does not support reading read-only switch, assuming write-enable [ 4.218992] mmc0: new high speed SDHC card at address 0007 [ 4.229485] mmcblk0: mmc0:0007 SD16G 14.4 GiB [ 4.233982] mmcblk0: p1 p2 [ 4.240129] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 4.246406] ti_oppdm 4a003b20.oppdm: Unable to get vdd regulator:-517 [ 4.253304] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 4.259514] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 4.265786] ti_oppdm 4a003b20.oppdm: Unable to get vdd regulator:-517 [ 4.272841] hctosys: unable to open rtc device (rtc0) [ 4.273774] mmc1: MAN_BKOPS_EN bit is not set [ 4.277874] mmc1: switch to bus width 2 failed [ 4.286646] mmc1: new HS200 MMC card at address 0001 [ 4.297145] mmcblk1: mmc1:0001 IS004G 3.64 GiB [ 4.304837] evm_1v8: disabling [ 4.307913] aic_dvdd: disabling [ 4.311088] vmmcwl_fixed: disabling [ 4.312058] mmcblk1boot0: mmc1:0001 IS004G partition 1 2.00 MiB [ 4.321056] ldousb: disabling [ 4.322363] mmcblk1boot1: mmc1:0001 IS004G partition 2 2.00 MiB [ 4.325107] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 4.325111] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 4.325167] ti_oppdm 4a003b20.oppdm: Unable to get vdd regulator:-517 [ 4.349908] ALSA device list: [ 4.352906] #0: DRA7xx-EVM [ 4.357297] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 4.366003] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 4.375750] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 4.383114] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 5.444955] EXT4-fs (mmcblk0p2): recovery complete [ 5.509104] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode . Opts: (null) [ 5.517279] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 5.526501] devtmpfs: mounted [ 5.529701] Freeing unused kernel memory: 336K [ 5.534180] This architecture does not have kernel memory protection. [ 5.724143] systemd[1]: System time before build time, advancing clock. [ 5.767970] random: systemd: uninitialized urandom read (16 bytes read, 20 bits of entropy available) [ 5.781216] random: systemd: uninitialized urandom read (16 bytes read, 20 bits of entropy available) [ 5.792865] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT - SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS + ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 5.811404] systemd[1]: Detected architecture arm. Welcome to Arago 2016.12! [ 5.831906] systemd[1]: Set hostname to . [ 5.898982] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 21 bits of entropy available) [ 5.926356] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 22 bits of entropy available) [ 5.936581] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 22 bits of entropy available) [ 5.953029] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 22 bits of entropy available) [ 5.966087] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 22 bits of entropy available) [ 6.043600] random: systemd: uninitialized urandom read (16 bytes read, 25 bits of entropy available) [ 6.053129] random: systemd: uninitialized urandom read (16 bytes read, 25 bits of entropy available) [ 6.063086] random: systemd: uninitialized urandom read (16 bytes read, 25 bits of entropy available) [ 6.204520] systemd[1]: alignment.service: Found ordering cycle on alignment.service/start [ 6.212858] systemd[1]: alignment.service: Found dependency on sysinit. target/start [ 6.220612] systemd[1]: alignment.service: Found dependency on alignment. service/start [ 6.228582] systemd[1]: alignment.service: Breaking ordering cycle by deleting job alignment.service/start [ 6.238308] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with alignment.service/start [ SKIP ] Ordering cycle found, skipping alignment.service [ 6.274007] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 6.300642] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 6.330606] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 6.360531] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 6.390612] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 6.430637] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 6.460457] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 6.481142] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 6.550454] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 6.583684] systemd[1]: Mounting Temporary Directory... Mounting Temporary Directory... [ 6.610583] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 6.660628] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 6.683085] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ 6.708613] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 6.717855] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console...[ 6.725124] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket.[ 6.734547] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch.[ 6. 746978] systemd[1]: Reached target Paths. 0;32m OK ]Reached target Paths.[ 6.758868] systemd[1]: Reached target Remote File Systems. 0;32m OK ]Reached target Remote File Systems.[ 6.768284] systemd[1]: Listening on Journal Socket (/dev/log). [[;32m OK ]Listening on Journal Socket (/dev/log). [ 6.820743] systemd[1]: Starting Journal Service... taSrting Journal Service...[ 6.828674] systemd[1]: Mounting POSIX Message Queue File System... oMunting POSIX Message Queue File System...[ 6.836557] systemd[1] : Created slice system-getty.slice. [[;32m OK ]Created slice system-getty.slice.[ 6.846361] systemd[1]: Listening on Network Service Netlink Socket. 0;32m OK ]Listening on Network Service Netlink Socket.[ 6.857843] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 6.876407] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System.[ 6.882817] systemd[1]: Mounted Debug File System. [ OK ] Mounted Debug File System.[ 6.892969] systemd[1]: Mounted Temporary Directory. [ OK ] Mounted Temporary Directory.[ 6.904252] systemd[1]: Started Create list of required static device nodes for the current kernel. [ OK ] Started Create list of required sta...ce nodes for the current kernel .[ 6.917227] systemd[1]: systemd-modules-load.service: Main process exited , code=exited, status=1/FAILURE [ 6.935575] systemd[1]: Failed to start Load Kernel Modules. [[;1;31mFAILED ]Failed to start Load Kernel Modules. See 'sstemctl status systemd-modules-load.service' for details.[ 6.941568] systemd[1]: systemd-modules-load.service: Unit entered failed state. [ 6.959664] systemd[1]: systemd-modules-load.service: Failed with result ' exit-code'. [ 6.969265] systemd[1]: Started Setup Virtual Console. [[032m OK ]Started Setup Virtual Console. [ 6.993964] systemd[1]: Started File System Check on Root Device. [[;32m OK ]Started File System Check on Root Device. [ 7.064617] systemd[1]: Started Journal Service. [[;32m OK ]Started Journal Service. taSrting Remount Root and Kernel File Systems... tSarting Apply Kernel Variables... [ 7.384532] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) tSarting Create Static Device Nodes in /dev... [[;32m OK ]Started Remount Root and Kernel File Systems. [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... Starting Flush Journal to Persistent Storage... Starting udev Coldplug all Devices... [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. [ 7.959746] systemd-journald[137]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... Starting Load/Save Random Seed... [ OK ] Started Create Volatile Files and Directories. [ OK ] Started Load/Save Random Seed. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ 8.443759] omap-rproc 58820000.ipu: assigned reserved memory node ipu1_cma @9d000000 [ 8.480374] remoteproc0: 58820000.ipu is available [ 8.490572] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 8.501129] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ OK ] Started Network Time Synchronization. [ 8.546550] remoteproc0: Direct firmwareload for dra7-ipu1-fw.xem4 failed with error -2 [ OK ] Started udev Coldplug all Devices. [ 8.563774] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma @95800000 [ 8.564203] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 8.564208] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 8.564269] ti_oppdm 4a003b20.oppdm: Unable to get vdd regulator:-517 [ 8.599231] remoteproc0: failed to load dra7-ipu1-fw.xem4 [ 8.606135] remoteproc1: 55020000.ipu is available [ 8.622877] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 8.640466] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ OK ] Started Update UTMP about System Boot/Shutdown.[ 8.672451] omap- rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [ 8.672835] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 8.672839] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 8.672897] ti_oppdm 4a003b20.oppdm: Unable to get vdd regulator:-517 [ 8.726595] remoteproc2: 40800000.dsp is available [ 8.739701] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 8.754797] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 8.776872] omap-rproc 41000000.dsp: assigned reserved memory node dsp2_cma @9f000000 [ 8.777090] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 8.777095] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 8.777152] ti_oppdm 4a003b20.oppdm: Unable to get vdd regulator:-517 [ OK ] Reached target System Time Synchronized. [ 8.834020] remoteproc3: 41000000.dsp is available [ 8.852455] remoteproc3: Note: remoteproc is still under development and considered experimental. [ 8.873019] remoteproc3: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. Starting Synchronize System and HW clocks... [ 8.905980] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 8.924316] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 8.965210] ti_oppdm 4a003b20.oppdm: Unable to get vdd regulator:-517 [ OK ] Found device /dev/ttyS0. [FAILED] Failed to start Synchronize System and HW clocks. See 'systemctl status sync-clocks.service' for details. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ 9.172165] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ OK ] Reached target Timers. [ 9.187639] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 9.204539] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 9.219222] ti_oppdm 4a003b20.oppdm: Unable to get vdd regulator:-517 [ 9.293595] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ 9.301007] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 9.308860] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 9.318597] ti_oppdm 4a003b20.oppdm: Unable to get vdd regulator:-517 [ 9.542675] remoteproc2: registered virtio0 (type 7) [ 9.933892] remoteproc3: registered virtio1 (type 7) [ OK ] Listening on dropbear.socket. [ 9.989410] remoteproc1: registered virtio2 (type 7) [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ 10.037445] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ OK ] Reached target Basic System.[ 10.055509] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 10.069859] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 10.078559] ti_oppdm 4a003b20.oppdm: Unable to get vdd regulator:-517 [ OK ] Started Kernel Logging Service. Starting Login Service... [ 10.196079] CAN device driver interface [ 10.355996] c_can_platform 4ae3c000.can: c_can_platform device registered ( regs=fce3c000, irq=358) [ 10.381654] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 10.387881] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 10.406628] ti_oppdm 4a003b20.oppdm: Unable to get vdd regulator:-517 [ 10.427148] SCSI subsystem initialized [ 10.470992] [drm] Initialized pvr 1.14.3699939 20110701 on minor 2 [ 10.484056] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 10.501091] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 10.510531] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ OK ] Started System Logging Service. [ 10.530416] ti_oppdm 4a003b20.oppdm: Unable to get vdd regulator:-517 [ 10.558288] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 10.566057] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ OK ] Started D-Bus System Message Bus. [ 10.622787] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 10.650088] ti_oppdm 4a003b20.oppdm: Unable to get vdd regulator:-517 [ 10.679927] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 10.710326] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 10.746957] ti_oppdm 4a003b20.oppdm: Unable to get vdd regulator:-517 [ 10.762793] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 10.772932] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 10.819078] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 10.895831] scsi host0: ahci Starting Network Service... [ 10.900448] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 343 [ 10.937350] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm Starting Save/Restore Sound Card State... [ 10.980165] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 11.002271] net eth1: initializing cpw version 1.15 (0) Starting Permit User Sessions... [ 11.014840] ti_oppdm 4a003b20.oppdm: Unable to get vdd regulator:-517 [ 11.023794] net eth0: initialized cpsw ale version 1.4 Starting rc.pvr.service... [ 11.040667] net eth0: ALE Table size 1024 [ 11.047698] libphy: PHY 48485000.mdio:03 not found(phy_connect) [ 11.074727] [ 11.074727] [ 11.074727] ,drivers/net/phy/phy_device.c,phy_connect,line=548 [ 11.074727] [ 11.092953] net eth1: phy "48485000.mdio:03" not found on slave 1, err -19 [ OK ] Started Network Service. [ OK ] Started Save/Restore Sound Card State. [ OK ] Started Permit User Sessions. [ 11.180300] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 11.210952] net eth0: initializing cpsw version 1.15 (0) [ 11.249215] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [ 11.272491] [ 11.272491] drivers/net/phy/phy_device.c,phy_connect_direct,line=500 [ 11.290513] ata1: SATA link down (SStatus 0 SControl 300) [ 11.335591] [ 11.335591] [ 11.335591] ,drivers/net/phy/phy_device.c,phy_attach_direct,line=664 [ 11.335591] [ 11.385423] [ 11.385423] come here 1 drivers/net/phy/realtek.c,rtl9000a_config_init, line=362 [ 11.407507] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 11.419144] [ 11.419144] *************************** 1 drivers/net/phy/realtek.c, RTL9000AA_AN_VC_init0_path_v04,line=186 ***************** [ 11.475236] [ 11.475236] ***************************20 phy_read(phydev, 0x1C)=0xdf8, drivers/net/phy/realtek.c,RTL9000AA_AN_VC_init0_path_v04,line=202 ***************** [ 11.543876] [ 11.543876] ***************************21 PHY ID HIGH phy_read(phydev, 0x02 )=0x1c, drivers/net/phy/realtek.c,RTL9000AA_AN_VC_init0_path_v04,line=203 ***************** [ OK ] Started rc.pvr.service. [ 11.607161] [ 11.607161] ***************************22 PHY ID LOW phy_read(phydev, 0x03 )=0xcb00, drivers/net/phy/realtek.c,RTL9000AA_AN_VC_init0_path_v04,line=204 ***************** [ 11.775949] remoteproc2: powering up 40800000.dsp [ 11.826886] remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 6985980 [ 11.848548] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 11.854452] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 11.860396] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 11.932318] [ 11.932318] *************************** 4 slave drivers/net/phy/realtek.c, RTL9000AA_AN_VC_init0_path_v04,line=264 ***************** [ 11.937986] remoteproc2: remote processor 40800000.dsp is now up [ 11.961022] virtio_rpmsg_bus virtio0: rpmsg host is online [ 11.969607] remoteproc3: powering up 41000000.dsp [ 11.970858] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 11.970862] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 11.970919] ti_oppdm 4a003b20.oppdm: Unable to get vdd regulator:-517 [ 11.971036] [ 11.971036] ***************************5 mdio_data=0x0 drivers/net/phy/ realtek.c,RTL9000AA_AN_VC_init0_path_v04,line=280 ***************** [ 11.971832] [ 11.971832] ***************************6 mdio_data=0x2100 drivers/net/phy/ realtek.c,RTL9000AA_AN_VC_init0_path_v04,line=283 ***************** [ 11.971834] -------------7 PHY is ready to go.--------------- [ 11.972871] [ 11.972871] come here 2 val=0x1 drivers/net/phy/realtek.c, rtl9000a_config_init,line=368 [ 11.975992] [ 11.975992] come here 4 features = 0xf88 drivers/net/phy/realtek.c, rtl9000a_config_init,line=407 [ 11.975995] [ 11.975995] [ 11.975995] ,drivers/net/phy/phy_device.c,phy_attach_direct,line=719 [ 11.975995] [ 11.978071] [ 11.978071] drivers/net/phy/phy_device.c,phy_connect_direct,line=502 [ 11.978074] [ 11.978074] drivers/net/phy/phy_device.c,phy_connect_direct,line=506 [ 11.978077] [ 11.978077] drivers/net/phy/phy_device.c,phy_connect_direct,line=512 [ 11.978086] cpsw 48484000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 11.978093] net eth0: phy found : id is : 0x1ccb00 [ 11.978234] [ 11.978234] **********reg=0x3322,phy_mode=0x7,slave=0x0,drivers/net/ ethernet/ti/cpsw-phy-sel.c,cpsw_gmii_sel_dra7xx,line=111 [ 11.978238] [ 11.978238] **********reg=0x3322,mask=0x3,mode=0x2,drivers/net/ethernet/ti/ cpsw-phy-sel.c,cpsw_gmii_sel_dra7xx,line=151 [ 11.993479] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.137570] remoteproc3: Booting fw image dra7-dsp2-fw.xe66, size 6985980 [ 12.151665] omap_hwmod: mmu0_dsp2: _wait_target_disable failed [ 12.157561] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0 [ 12.163492] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0 [ 12.192767] remoteproc3: remote processor 41000000.dsp is now up [ 12.200377] virtio_rpmsg_bus virtio1: rpmsg host is online [ 12.206977] remoteproc1: powering up 55020000.ipu [ 12.208174] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 12.208178] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 12.208236] ti_oppdm 4a003b20.oppdm: Unable to get vdd regulator:-517 [ 12.244363] remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 10183832 [ 12.251486] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ 12.290369] remoteproc1: remote processor 55020000.ipu is now up [ 12.302362] virtio_rpmsg_bus virtio2: rpmsg host is online [ 12.313119] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 12.322308] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 12.334242] ti_oppdm 4a003b20.oppdm: Unable to get vdd regulator:-517 [ 12.542737] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x50 [ 12.558854] virtio_rpmsg_bus virtio0: creating channel rpmsg-proto addr 0x50 [ 12.567221] virtio_rpmsg_bus virtio1: creating channel rpmsg-proto addr 0x50 [ OK ] Started Login Service. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 12.656188] NET: Registered protocol family 41 [ 12.664763] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ OK ] Reached target Sound Card.[ 12.674972] Adding alias for supply vbb, cpu0 -> vbb,4a003b20.oppdm [ 12.692127] ti_oppdm 4a003b20.oppdm: Unable to get vdd regulator:-517 Starting weston.service... [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Network. Starting Network Name Resolution... [ OK ] Started weston.service. [ OK ] Started Network Name Resolution. Starting tiipclad-daemon.service... Starting telnetd.service... [ OK ] Started tiipclad-daemon.service. [ OK ] Started telnetd.service. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dra7xx-evm ttyS0 Arago 2016.12 dra7xx-evm ttyS0 dra7xx-evm login: root root@dra7xx-evm:~# ifconfig eth0 Link encap:Ethernet HWaddr F8:36:9B:BF:B6:A2 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:99 eth1 Link encap:Ethernet HWaddr F8:36:9B:BF:B6:A3 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1%132400/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:160 errors:0 dropped:0 overruns:0 frame:0 TX packets:160 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:12160 (11.8 KiB) TX bytes:12160 (11.8 KiB) root@dra7xx-evm:~# ifconfig 192.168.154.88 netmask 255.255.255.0 ifconfig: SIOCSIFNETMASK: No such device root@dra7xx-evm:~# ifconfig eth0 192.168.154.88 netmask 255.255.255.0 root@dra7xx-evm:~# ifconfig eth0 up root@dra7xx-evm:~# ping 192.1[ 79.365763] random: nonblocking pool is initialized 68.154.1 PING 192.168.154.1 (192.168.154.1): 56 data bytes ^C --- 192.168.154.1 ping statistics --- 8 packets transmitted, 0 packets received, 100% packet loss root@dra7xx-evm:~# ping 192.168.154.1 PING 192.168.154.1 (192.168.154.1): 56 data bytes