0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 ** Unable to read file boot.scr ** ** Unable to read file uEnv.txt ** switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 3809792 bytes read in 370 ms (9.8 MiB/s) 37192 bytes read in 18 ms (2 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8df02000, end 8df0e147 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.40-rt29-gd5443cbd3b (root@VLVIRTUAL) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #460 PREEMPT RT Wed Sep 26 16:43:47 MSK 2018 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM3359 ICE-V2 - dual CPSW [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 48 MiB at 0x8a800000 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] Kernel command line: console=ttyO3,115200n8 root=PARTUUID=541bb3d9-02 rw rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 197212K/262144K available (8192K kernel code, 333K rwdata, 2404K rodata, 1024K init, 320K bss, 15780K reserved, 49152K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0900000 (9184 kB) [ 0.000000] .init : 0xc0c00000 - 0xc0d00000 (1024 kB) [ 0.000000] .data : 0xc0d00000 - 0xc0d535c0 ( 334 kB) [ 0.000000] .bss : 0xc0d535c0 - 0xc0da3874 ( 321 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] No expedited grace period (rcu_normal_after_boot). [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000017] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000034] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000042] OMAP clocksource: timer1 at 24000000 Hz [ 0.000270] timer_probe: no matching timers found [ 0.000521] Console: colour dummy device 80x30 [ 0.000704] WARNING: Your 'console=ttyO3' has been replaced by 'ttyS3' [ 0.000708] This ensures that you still see kernel messages. Please [ 0.000710] update your kernel commandline. [ 0.000743] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032) [ 0.058772] pid_max: default: 32768 minimum: 301 [ 0.059041] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.059052] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.060137] CPU: Testing write buffer coherency: ok [ 0.061050] Setting up static identity map for 0x80100000 - 0x80100060 [ 0.061377] Hierarchical SRCU implementation. [ 0.062230] EFI services will not be available. [ 0.064077] devtmpfs: initialized [ 0.076221] random: get_random_u32 called from bucket_table_alloc+0x124/0x27c with crng_init=0 [ 0.076817] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.077217] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.077252] futex hash table entries: 256 (order: 1, 8192 bytes) [ 0.081746] pinctrl core: initialized pinctrl subsystem [ 0.082697] DMI not present or invalid. [ 0.083313] NET: Registered protocol family 16 [ 0.086968] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.105369] omap_hwmod: debugss: _wait_target_disable failed [ 0.166445] OMAP GPIO hardware version 0.1 [ 0.170348] GPIO line 100 (PR1_MII_CTRL) hogged as output/high [ 0.170382] GPIO line 106 (MUX_MII_CTL1) hogged as output/high [ 0.180525] No ATAGs? [ 0.180548] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.201141] edma 49000000.edma: TI EDMA DMA engine driver [ 0.205711] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/i2c0_pins_default, deferring probe [ 0.205887] media: Linux media interface: v0.10 [ 0.205955] Linux video capture interface: v2.00 [ 0.206112] pps_core: LinuxPPS API ver. 1 registered [ 0.206125] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.206156] PTP clock support registered [ 0.206208] EDAC MC: Ver: 3.0.0 [ 0.206866] dmi: Firmware registration failed. [ 0.207363] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 0.207825] Advanced Linux Sound Architecture Driver Initialized. [ 0.209691] clocksource: Switched to clocksource timer1 [ 0.222545] NET: Registered protocol family 2 [ 0.223632] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.223694] TCP bind hash table entries: 2048 (order: 3, 49152 bytes) [ 0.223829] TCP: Hash tables configured (established 2048 bind 2048) [ 0.223973] UDP hash table entries: 256 (order: 2, 16384 bytes) [ 0.224028] UDP-Lite hash table entries: 256 (order: 2, 16384 bytes) [ 0.224295] NET: Registered protocol family 1 [ 0.224934] RPC: Registered named UNIX socket transport module. [ 0.224953] RPC: Registered udp transport module. [ 0.224962] RPC: Registered tcp transport module. [ 0.224972] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.226090] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.226246] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 0.228198] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 0.235231] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.236422] NFS: Registering the id_resolver key type [ 0.236481] Key type id_resolver registered [ 0.236493] Key type id_legacy registered [ 0.236562] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.239418] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.239445] io scheduler noop registered [ 0.239458] io scheduler deadline registered [ 0.239641] io scheduler cfq registered (default) [ 0.239657] io scheduler mq-deadline registered [ 0.239668] io scheduler kyber registered [ 0.241572] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.319081] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.323319] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 30, base_baud = 3000000) is a 8250 [ 0.955432] console [ttyS3] enabled [ 0.961495] omap_rng 48310000.rng: Random Number Generator ver. 20 [ 0.983354] brd: module loaded [ 0.996609] loop: module loaded [ 1.003586] m25p80 spi0.0: unrecognized JEDEC id bytes: ff, ff, ff [ 1.011178] libphy: Fixed MDIO Bus: probed [ 1.089783] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 1.097501] libphy: 4a101000.mdio: probed [ 1.104162] davinci_mdio 4a101000.mdio: phy[1]: device 4a101000.mdio:01, driver TI TLK10X 10/100 Mbps PHY [ 1.113869] davinci_mdio 4a101000.mdio: phy[3]: device 4a101000.mdio:03, driver TI TLK10X 10/100 Mbps PHY [ 1.124529] cpsw 4a100000.ethernet: Detected MACID = 84:eb:18:94:38:23 [ 1.131285] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 [ 1.137676] cpsw 4a100000.ethernet: ALE Table size 1024 [ 1.142985] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) [ 1.151315] cpsw 4a100000.ethernet: cpsw: Detected MACID = 84:eb:18:94:38:25 [ 1.160579] i2c /dev entries driver [ 1.164643] IR NEC protocol handler initialized [ 1.169203] IR RC5(x/sz) protocol handler initialized [ 1.174343] IR RC6 protocol handler initialized [ 1.178899] IR JVC protocol handler initialized [ 1.183450] IR Sony protocol handler initialized [ 1.188091] IR SANYO protocol handler initialized [ 1.192816] IR Sharp protocol handler initialized [ 1.197543] IR MCE Keyboard/mouse protocol handler initialized [ 1.203417] IR XMP protocol handler initialized [ 1.209262] sdhci: Secure Digital Host Controller Interface driver [ 1.215478] sdhci: Copyright(c) Pierre Ossman [ 1.221697] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.234344] NET: Registered protocol family 10 [ 1.241153] Segment Routing with IPv6 [ 1.244948] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.251975] NET: Registered protocol family 17 [ 1.256790] Key type dns_resolver registered [ 1.261465] omap_voltage_late_init: Voltage driver support not added [ 1.300017] tps65910 0-002d: No interrupt support, no core IRQ [ 1.308486] vrtc: supplied by vbat [ 1.315846] vio: supplied by vbat [ 1.320864] vdd1: supplied by vbat [ 1.326280] vdd2: supplied by vbat [ 1.333311] vdig1: supplied by vbat [ 1.338357] vdig2: supplied by vbat [ 1.343399] vpll: supplied by vbat [ 1.348330] vdac: supplied by vbat [ 1.353294] vaux1: supplied by vbat [ 1.358319] vaux2: supplied by vbat [ 1.363367] vaux33: supplied by vbat [ 1.368479] vmmc: supplied by vbat [ 1.373452] vbb: supplied by vbat [ 1.405295] Console: switching to mono frame buffer device 12x2 [ 1.438263] ssd1307fb 0-003c: fb0: Solomon SSD1307 framebuffer device registered, using 192 bytes of video memory [ 1.448696] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.510489] hctosys: unable to open rtc device (rtc0) [ 1.516511] ALSA device list: [ 1.522484] No soundcards found. [ 1.530402] Waiting for root device PARTUUID=541bb3d9-02... [ 1.568151] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.579352] mmc0: new high speed SDHC card at address 0007 [ 1.585549] mmcblk0: mmc0:0007 APUSD 7.42 GiB [ 1.591829] mmcblk0: p1 p2 [ 2.250483] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.258720] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 2.272943] devtmpfs: mounted [ 2.278595] Freeing unused kernel memory: 1024K [ 2.686326] systemd[1]: System time before build time, advancing clock. [ 2.773974] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid) [ 2.795748] systemd[1]: Detected architecture arm. Welcome to Arago 2018.04! [ 2.831456] systemd[1]: Set hostname to . [ 3.242710] mmcblk0: error -5 sending stop command, original cmd response 0x900, card status 0x900 [ 3.251743] mmcblk0: error -110 transferring data, sector 15564672, nr 8, cmd response 0x900, card status 0x200b00 [ 3.262274] mmcblk0: retrying using single block read [ 3.442254] mmcblk0: error -110 transferring data, sector 15564672, nr 8, cmd response 0x900, card status 0x0 [ 3.452356] print_req_error: I/O error, dev mmcblk0, sector 15564672 [ 3.658677] mmcblk0: error -110 transferring data, sector 15564673, nr 7, cmd response 0x900, card status 0x0 [ 3.668772] print_req_error: I/O error, dev mmcblk0, sector 15564673 [ 3.875080] mmcblk0: error -110 transferring data, sector 15564674, nr 6, cmd response 0x900, card status 0x0 [ 3.885175] print_req_error: I/O error, dev mmcblk0, sector 15564674 [ 4.091502] mmcblk0: error -110 transferring data, sector 15564675, nr 5, cmd response 0x900, card status 0x0 [ 4.101597] print_req_error: I/O error, dev mmcblk0, sector 15564675 [ 4.307903] mmcblk0: error -110 transferring data, sector 15564676, nr 4, cmd response 0x900, card status 0x0 [ 4.317997] print_req_error: I/O error, dev mmcblk0, sector 15564676 [ 4.524314] mmcblk0: error -110 transferring data, sector 15564677, nr 3, cmd response 0x900, card status 0x0 [ 4.534410] print_req_error: I/O error, dev mmcblk0, sector 15564677 [ 4.740848] mmcblk0: error -110 transferring data, sector 15564678, nr 2, cmd response 0x900, card status 0x0 [ 4.740984] print_req_error: I/O error, dev mmcblk0, sector 15564678 [ 4.940918] mmcblk0: error -110 transferring data, sector 15564679, nr 1, cmd response 0x900, card status 0x0 [ 4.951011] print_req_error: I/O error, dev mmcblk0, sector 15564679 [ 5.191598] mmcblk0: error -5 sending stop command, original cmd response 0x900, card status 0x900 [ 5.200631] mmcblk0: error -110 transferring data, sector 15564672, nr 8, cmd response 0x900, card status 0x200b00 [ 5.211038] mmcblk0: retrying using single block read [ 5.416067] mmcblk0: error -110 transferring data, sector 15564672, nr 8, cmd response 0x900, card status 0x0 [ 5.426045] print_req_error: I/O error, dev mmcblk0, sector 15564672 [ 5.632378] mmcblk0: error -110 transferring data, sector 15564673, nr 7, cmd response 0x900, card status 0x0 [ 5.642352] print_req_error: I/O error, dev mmcblk0, sector 15564673 [ 5.848660] mmcblk0: error -110 transferring data, sector 15564674, nr 6, cmd response 0x900, card status 0x0 [ 6.058550] mmcblk0: error -110 transferring data, sector 15564675, nr 5, cmd response 0x900, card status 0x0 [ 6.268437] mmcblk0: error -110 transferring data, sector 15564676, nr 4, cmd response 0x900, card status 0x0 [ 6.478326] mmcblk0: error -110 transferring data, sector 15564677, nr 3, cmd response 0x900, card status 0x0 [ 6.688259] mmcblk0: error -110 transferring data, sector 15564678, nr 2, cmd response 0x900, card status 0x0 [ 6.898167] mmcblk0: error -110 transferring data, sector 15564679, nr 1, cmd response 0x900, card status 0x0 [ 6.908149] Buffer I/O error on dev mmcblk0, logical block 1945584, async page read [ 6.916136] systemd-gpt-auto-generator[68]: Failed to dissect: Input/output error [ 6.934283] systemd[64]: /lib/systemd/system-generators/systemd-gpt-auto-generator failed with error code 1. [ 7.120227] systemd[1]: /lib/systemd/system/gadget-init.service:15: Unknown lvalue 'ExecStopPre' in section 'Service' [ 7.904822] random: systemd: uninitialized urandom read (16 bytes read) [ 7.912561] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 7.950192] random: systemd: uninitialized urandom read (16 bytes read) [ 7.957414] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 8.000084] random: systemd: uninitialized urandom read (16 bytes read) [ 8.007234] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 8.050554] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 8.080622] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 8.110208] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 8.140587] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 8.174209] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 8.212181] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 8.257077] systemd[1]: Mounting Temporary Directory (/tmp)... Mounting Temporary Directory (/tmp)... Mounting POSIX Message Queue File System... Mounting Kernel Debug File System... [ OK ] Listening on Process Core Dump Socket. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Reached target Paths. [ OK ] Reached target Remote File Systems. [ OK ] Created slice system-getty.slice. Starting Load Kernel Modules... [ OK ] Listening on udev Control Socket. [ 8.665031] cryptodev: loading out-of-tree module taints kernel. [ OK ] Reached target Slices. [ 8.675487] cryptodev: driver 1.9 loaded. [ OK ] Listening on Journal Socket (/dev/log). [ 8.718274] usbcore: registered new interface driver usbfs [ 8.724098] usbcore: registered new interface driver hub [ 8.729665] usbcore: registered new device driver usb Starting Journal Service... [ 8.762586] usbcore: registered new interface driver usbserial Starting Remount Root and Kernel File Systems... [ OK ] Listening on Network Service Netlink Socket. [[ 8.943588] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) OK ] Mounted Kernel Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Temporary Directory (/tmp). [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Journal Service. Starting Create System Users... Starting Flush Journal to Persistent Storage... Starting Rebuild Hardware Database... Mounting Kernel Configuration File System... Starting Apply Kernel Variables... [ OK ] Mounted Kernel Configuration File System. [ OK ] Started Create System Users. [ OK ] Started Apply Kernel Variables. [ 9.676552] systemd-journald[79]: Received request to flush runtime journal from PID 1 Starting Create Static Device Nodes in /dev... [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... Starting udev Kernel Device Manager... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... Starting Rebuild Dynamic Linker Cache... Starting Rebuild Journal Catalog... [ OK ] Started Load/Save Random Seed. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... Starting Network Time Synchronization... [ OK ] Started Rebuild Journal Catalog. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Rebuild Dynamic Linker Cache. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ OK ] Started Rebuild Hardware Database. Starting Update is Completed... Starting udev Coldplug all Devices... [ OK ] Started Update is Completed. [ OK ] Started udev Coldplug all Devices. [ OK ] Reached target System Initialization. [ 18.577115] gpio-decoder gpio-decoder: unable to acquire input gpios [ 18.660684] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ OK ] Listening on dropbear.socket. [ 18.704065] PM: Cannot get wkup_m3_ipc handle [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Reached target Sockets. [ 18.909154] gpio-decoder gpio-decoder: unable to acquire input gpios [ 18.917861] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 18.960833] omap_rtc 44e3e000.rtc: registered as rtc0 Starting Network Service... [ OK ] Reached target Basic System. [ 19.078013] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 19.078706] PM: Cannot get wkup_m3_ipc handle [ 19.100307] gpio-decoder gpio-decoder: unable to acquire input gpios [ OK ] Started Hardware RNG Entropy Gatherer Daemon. [ OK ] Started D-Bus System Message Bus. [ 19.453733] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 19.509100] PM: Cannot get wkup_m3_ipc handle [ 19.538174] gpio-decoder gpio-decoder: unable to acquire input gpios [ 19.604806] pca953x 0-0041: 0-0041 supply vcc not found, using dummy regulator [ 19.741853] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 19.743449] PM: Cannot get wkup_m3_ipc handle [ 19.758558] input: gpio-decoder as /devices/platform/gpio-decoder/input/input0 [ 19.775410] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 19.776004] PM: Cannot get wkup_m3_ipc handle [ 20.156998] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 20.218418] PM: Cannot get wkup_m3_ipc handle [ 20.420311] mmcblk0: error -5 sending stop command, original cmd response 0x900, card status 0x900 [ 20.429351] mmcblk0: error -110 transferring data, sector 15564672, nr 8, cmd response 0x900, card status 0x200b00 [ 20.448960] mmcblk0: retrying using single block read [ 20.702033] mmcblk0: error -110 transferring data, sector 15564672, nr 8, cmd response 0x900, card status 0x0 [ 20.702058] print_req_error: 6 callbacks suppressed [ 20.702069] print_req_error: I/O error, dev mmcblk0, sector 15564672 [ 20.902374] mmcblk0: error -110 transferring data, sector 15564673, nr 7, cmd response 0x900, card status 0x0 [ 20.942492] print_req_error: I/O error, dev mmcblk0, sector 15564673 [ 21.149101] mmcblk0: error -110 transferring data, sector 15564674, nr 6, cmd response 0x900, card status 0x0 [ 21.149128] print_req_error: I/O error, dev mmcblk0, sector 15564674 [ 21.349669] mmcblk0: error -110 transferring data, sector 15564675, nr 5, cmd response 0x900, card status 0x0 [ 21.349847] print_req_error: I/O error, dev mmcblk0, sector 15564675 [ 21.550328] mmcblk0: error -110 transferring data, sector 15564676, nr 4, cmd response 0x900, card status 0x0 [ 21.550355] print_req_error: I/O error, dev mmcblk0, sector 15564676 [ 21.725389] mmcblk0: error -110 transferring data, sector 15564677, nr 3, cmd response 0x900, card status 0x0 [ 21.745380] print_req_error: I/O error, dev mmcblk0, sector 15564677 [ 21.962046] mmcblk0: error -110 transferring data, sector 15564678, nr 2, cmd response 0x900, card status 0x0 [ 21.981988] print_req_error: I/O error, dev mmcblk0, sector 15564678 [ 22.188691] mmcblk0: error -110 transferring data, sector 15564679, nr 1, cmd response 0x900, card status 0x0 [ 22.188717] print_req_error: I/O error, dev mmcblk0, sector 15564679 [ 22.188736] Buffer I/O error on dev mmcblk0, logical block 1945584, async page read [ 22.227070] remoteproc remoteproc0: wkup_m3 is available [ 22.240385] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 22.396971] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 22.400242] omap-aes 53500000.aes: will run requests pump with realtime priority [ OK ] Started Periodic Command Scheduler. [[ 23.100450] PM: Cannot get wkup_m3_ipc handle [ 23.104965] remoteproc remoteproc0: powering up wkup_m3 OK ] Started Job spooling tools. [ 23.170181] net eth1: initializing cpsw version 1.12 (0) [ 23.182337] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 224628 Starting Print notice about GPLv3 packages... [ 23.305909] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192 [ 23.312998] remoteproc remoteproc0: remote processor wkup_m3 is now up [ 23.330701] TI TLK10X 10/100 Mbps PHY 4a101000.mdio:03: attached PHY driver [TI TLK10X 10/100 Mbps PHY] (mii_bus:phy_addr=4a101000.mdio:03, irq=POLL) [ OK ] Reached target Containers. Starting RPC Bind Service... [ 23.623750] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ OK ] Started System Logging Service. Starting uim-sysfs.service... [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timers. [[ 24.240330] net eth0: initializing cpsw version 1.12 (0) OK ] Started Kernel Logging Service. Starting Login Service... [ 24.420740] TI TLK10X 10/100 Mbps PHY 4a101000.mdio:01: attached PHY driver [TI TLK10X 10/100 Mbps PHY] (mii_bus:phy_addr=4a101000.mdio:01, irq=POLL) Starting Avahi mDNS/DNS-SD Stack... [ 24.720494] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ OK ] Started Network Service. [ OK ] Started RPC Bind Service. [ OK ] Found device /dev/ttyS3. [ OK ] Found device /dev/ttyS0. [ 26.722691] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 26.791725] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 27.542792] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Login Service. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Created slice system-systemd\x2dbacklight.slice. Starting Load/Save Screen Backlight…ghtness of backlight:ssd1307fb0... [ OK ] Reached target Network. Starting Lightning Fast Webserver With Light System Requirements... Starting Simple Network Management Protocol (SNMP) Daemon.... Starting Permit User Sessions... [ OK ] Started Redis In-Memory Data Store. Starting Enable and configure wl18xx bluetooth stack... Starting Network Name Resolution... Starting Wait for Network to be Configured... [ OK ] Started Load/Save Screen Backlight Brightness of backlight:ssd1307fb0. [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started Permit User Sessions. [ OK ] Started Enable and configure wl18xx bluetooth stack. [ OK ] Found device /dev/mmcblk0p1. [ OK ] Started Network Name Resolution. [ 32.516631] hrtimer: interrupt took 55709 ns [ OK ] Started Simple Network Management Protocol (SNMP) Daemon.. [ 34.106915] PM: bootloader does not support rtc-only! [ OK ] Started uim-sysfs.service. [ 34.301320] pruss 4a300000.pruss: creating PRU cores and other child platform devices [ 34.812755] remoteproc remoteproc1: 4a334000.pru is available [ 34.818666] pru-rproc 4a334000.pru: PRU rproc node /ocp/pruss_soc_bus@4a326004/pruss@0/pru@34000 probed successfully [ 34.919237] remoteproc remoteproc2: 4a338000.pru is available [ 34.926833] pru-rproc 4a338000.pru: PRU rproc node /ocp/pruss_soc_bus@4a326004/pruss@0/pru@38000 probed successfully *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf bash-dev bash binutils cifs-utils cpio cpp-symlinks cpp dosfstools elfutils findutils g++-symlinks g++ gawk gcc-symlinks gcc gdb gdbserver gettext gstreamer1.0-libav gzip hidapi libdw1 libelf1 libgdbm-compat4 libgdbm-dev libgdbm4 libgettextlib libgettextsrc libgmp10 libidn11 libmavconn libmpc3 libmpfr4 libreadline-dev libreadline7 libunistring2 m4-dev m4 make mavlink mavros-extras mavros-msgs mavros nettle python3-pycairo socketcan-interface which If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. Starting rc.pvr.service... [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started NFS status monitor for NFSv2/3 locking.. [ OK ] Stopped Redis In-Memory Data Store. [ OK ] Started Redis In-Memory Data Store. Starting Start USB gadget... [ OK ] Started Serial Getty on ttyS3. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS0. [ 40.060540] udc-core: couldn't find an available UDC - added [g_multi] to list of pending drivers [ OK ] Started rc.pvr.service. [FAILED] Failed to start Start USB gadget. See 'systemctl status gadget-init.service' for details. Starting weston.service... [ OK ] Stopped Redis In-Memory Data Store. [ OK ] Started Redis In-Memory Data Store. [ OK ] Started weston.service. Starting telnetd.service... [ OK ] Started telnetd.service. Starting thttpd.service... Starting busybox-udhcpd.service... Starting CS61850.service... [ OK ] Started thttpd.service. [ OK ] Started busybox-udhcpd.service. [ OK ] Stopped Redis In-Memory Data Store. [ 41.031079] device eth0 entered promiscuous mode [ OK ] Started Redis In-Memory Data Store. [ 41.080500] device eth1 entered promiscuous mode [ 41.238396] hsr0: HSR/PRP: Please bringup Slave B (eth1) [ 41.289034] IPv6: ADDRCONF(NETDEV_UP): hsr0: link is not ready [ 41.318522] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready [ OK ] Started CS61850.service. Starting rng-tools.service... [ OK ] Stopped Redis In-Memory Data Store. [ OK ] Started Redis In-Memory Data Store. [ OK ] Started rng-tools.service. [ OK ] Stopped Redis In-Memory Data Store. [ OK ] Started Redis In-Memory Data Store. [ OK ] Stopped Redis In-Memory Data Store. [ OK ] Started Redis In-Memory Data Store. [ OK ] Stopped Redis In-Memory Data Store. [FAILED] Failed to start Redis In-Memory Data Store. See 'systemctl status redis.service' for details. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am335x-evm ttyS3 Arago 2018.04 am335x-evm ttyS3 am335x-evm login: