root@j7200-iwg52m:~# dmesg 
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080]
[    0.000000] Linux version 6.1.80-ti-g1c154b1fe4c4 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Thu Mar 14 13:59:07 UTC 2024
[    0.000000] Machine model: Texas Instruments K3 J7200 SoC
[    0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
[    0.000000] printk: bootconsole [ns16550a0] enabled
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB
[    0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB
[    0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB
[    0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB
[    0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x000000009e7fffff]
[    0.000000]   node   0: [mem 0x000000009e800000-0x00000000a47fffff]
[    0.000000]   node   0: [mem 0x00000000a4800000-0x00000000ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000] cma: Reserved 32 MiB at 0x00000000fba00000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.4
[    0.000000] percpu: Embedded 20 pages/cpu s41064 r8192 d32664 u81920
[    0.000000] pcpu-alloc: s41064 r8192 d32664 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: Spectre-v3a
[    0.000000] CPU features: detected: Spectre-BHB
[    0.000000] CPU features: detected: ARM erratum 1742098
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516096
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1905732K/2097152K available (12160K kernel code, 1284K rwdata, 3976K rodata, 2048K init, 440K bss, 158652K reserved, 32768K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 960 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000
[    0.000000] ITS [mem 0x01820000-0x0182ffff]
[    0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[    0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
[    0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x0000000080030000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[    0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[    0.008346] Console: colour dummy device 80x25
[    0.012911] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[    0.023583] pid_max: default: 32768 minimum: 301
[    0.028320] LSM: Security Framework initializing
[    0.033099] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.040668] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.049508] cblist_init_generic: Setting adjustable number of callback queues.
[    0.056914] cblist_init_generic: Setting shift to 1 and lim to 1.
[    0.063182] cblist_init_generic: Setting adjustable number of callback queues.
[    0.070569] cblist_init_generic: Setting shift to 1 and lim to 1.
[    0.076889] rcu: Hierarchical SRCU implementation.
[    0.081789] rcu:     Max phase no-delay instances is 1000.
[    0.087300] Platform MSI: msi-controller@1820000 domain created
[    0.093446] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created
[    0.102794] EFI services will not be available.
[    0.107530] smp: Bringing up secondary CPUs ...
[    0.112679] Detected PIPT I-cache on CPU1
[    0.112739] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000
[    0.112754] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000
[    0.112788] CPU1: Booted secondary processor 0x0000000001 [0x411fd080]
[    0.112838] smp: Brought up 1 node, 2 CPUs
[    0.142191] SMP: Total of 2 processors activated.
[    0.146995] CPU features: detected: 32-bit EL0 Support
[    0.152252] CPU features: detected: CRC32 instructions
[    0.157531] CPU: All CPU(s) started at EL2
[    0.161713] alternatives: applying system-wide alternatives
[    0.168310] devtmpfs: initialized
[    0.175766] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.185740] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.193404] pinctrl core: initialized pinctrl subsystem
[    0.199085] DMI not present or invalid.
[    0.203349] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.210023] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.217324] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.225332] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.233463] audit: initializing netlink subsys (disabled)
[    0.239064] audit: type=2000 audit(0.152:1): state=initialized audit_enabled=0 res=1
[    0.239273] thermal_sys: Registered thermal governor 'step_wise'
[    0.246989] thermal_sys: Registered thermal governor 'power_allocator'
[    0.253144] cpuidle: using governor menu
[    0.263884] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.270846] ASID allocator initialised with 65536 entries
[    0.282330] platform a40000.pinctrl: Fixed dependency cycle(s) with /bus@100000/pinctrl@a40000/mcu-cpsw-cpts
[    0.292756] KASLR disabled due to lack of seed
[    0.300208] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.307174] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[    0.313581] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.320526] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[    0.326953] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.333887] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[    0.340289] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[    0.347222] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[    0.354510] k3-chipinfo 43000014.chipid: Family:J7200 rev:SR2.0 JTAGID[0x1bb6d02f] Detected
[    0.363197] reg-fixed-voltage fixedregulator-vsys3v3: GPIO lookup for consumer (null)
[    0.363202] reg-fixed-voltage fixedregulator-vsys3v3: using device tree for GPIO lookup
[    0.363208] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator-vsys3v3[0]'
[    0.363216] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vsys3v3[0]'
[    0.363222] reg-fixed-voltage fixedregulator-vsys3v3: using lookup tables for GPIO lookup
[    0.363225] reg-fixed-voltage fixedregulator-vsys3v3: No GPIO consumer (null) found
[    0.363344] reg-fixed-voltage fixedregulator-vcca5v: GPIO lookup for consumer (null)
[    0.363348] reg-fixed-voltage fixedregulator-vcca5v: using device tree for GPIO lookup
[    0.363353] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator-vcca5v[0]'
[    0.363359] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vcca5v[0]'
[    0.363364] reg-fixed-voltage fixedregulator-vcca5v: using lookup tables for GPIO lookup
[    0.363367] reg-fixed-voltage fixedregulator-vcca5v: No GPIO consumer (null) found
[    0.363602] iommu: Default domain type: Translated 
[    0.368591] iommu: DMA domain TLB invalidation policy: strict mode 
[    0.375118] SCSI subsystem initialized
[    0.379021] libata version 3.00 loaded.
[    0.379113] usbcore: registered new interface driver usbfs
[    0.384732] usbcore: registered new interface driver hub
[    0.390169] usbcore: registered new device driver usb
[    0.395525] pps_core: LinuxPPS API ver. 1 registered
[    0.400598] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.409940] PTP clock support registered
[    0.414009] EDAC MC: Ver: 3.0.0
[    0.417674] FPGA manager framework
[    0.421204] Advanced Linux Sound Architecture Driver Initialized.
[    0.427855] clocksource: Switched to clocksource arch_sys_counter
[    0.434236] VFS: Disk quotas dquot_6.6.0
[    0.438268] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.448384] NET: Registered PF_INET protocol family
[    0.453671] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.462170] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.470917] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.478841] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.487006] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.495048] TCP: Hash tables configured (established 16384 bind 16384)
[    0.501870] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.508768] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.516175] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.522244] RPC: Registered named UNIX socket transport module.
[    0.528303] RPC: Registered udp transport module.
[    0.533106] RPC: Registered tcp transport module.
[    0.537911] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.544494] NET: Registered PF_XDP protocol family
[    0.549395] PCI: CLS 0 bytes, default 64
[    0.553795] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    0.562876] Initialise system trusted keyrings
[    0.567549] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    0.576311] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.582581] NFS: Registering the id_resolver key type
[    0.587767] Key type id_resolver registered
[    0.592040] Key type id_legacy registered
[    0.596160] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.603008] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.629249] Key type asymmetric registered
[    0.633435] Asymmetric key parser 'x509' registered
[    0.638451] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.646099] io scheduler mq-deadline registered
[    0.650731] io scheduler kyber registered
[    0.656641] pinctrl-single 4301c000.pinctrl: 13 pins, size 52
[    0.662671] pinctrl-single 4301c038.pinctrl: 2 pins, size 8
[    0.668472] pinctrl-single 4301c068.pinctrl: 59 pins, size 236
[    0.674607] pinctrl-single 4301c174.pinctrl: 8 pins, size 32
[    0.680571] pinctrl-single 11c000.pinctrl: 67 pins, size 268
[    0.686586] pinctrl-single 11c110.pinctrl: 1 pins, size 4
[    0.692166] pinctrl-single 11c11c.pinctrl: 3 pins, size 12
[    0.697848] pinctrl-single 11c164.pinctrl: 2 pins, size 8
[    0.703808] pinctrl-single a40000.pinctrl: 512 pins, size 2048
[    0.713089] Serial: 8250/16550 driver, 12 ports, IRQ sharing enabled
[    0.724312] loop: module loaded
[    0.728114] megasas: 07.719.03.00-rc1
[    0.732857] mdio_bus fixed-0: GPIO lookup for consumer reset
[    0.732864] mdio_bus fixed-0: using lookup tables for GPIO lookup
[    0.732867] mdio_bus fixed-0: No GPIO consumer reset found
[    0.733436] tun: Universal TUN/TAP device driver, 1.6
[    0.738994] VFIO - User Level meta-driver version: 0.3
[    0.745013] usbcore: registered new interface driver cdc_acm
[    0.750815] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.759021] usbcore: registered new interface driver usb-storage
[    0.765578] i2c_dev: i2c /dev entries driver
[    0.770751] sdhci: Secure Digital Host Controller Interface driver
[    0.777091] sdhci: Copyright(c) Pierre Ossman
[    0.781645] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.787686] ledtrig-cpu: registered to indicate activity on CPUs
[    0.793911] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    0.800630] usbcore: registered new interface driver usbhid
[    0.806327] usbhid: USB HID core driver
[    0.810730] optee: probing for conduit method.
[    0.815293] optee: revision 4.1 (012cdca4)
[    0.815457] optee: dynamic shared memory is enabled
[    0.824844] optee: initialized driver
[    0.829757] Initializing XFRM netlink socket
[    0.834152] NET: Registered PF_PACKET protocol family
[    0.839349] Key type dns_resolver registered
[    0.843926] registered taskstats version 1
[    0.848127] Loading compiled-in X.509 certificates
[    0.859640] ti-sci 44083000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)')
[    0.884825] i2c i2c-1: GPIO lookup for consumer scl
[    0.884836] i2c i2c-1: using device tree for GPIO lookup
[    0.884844] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/bus@100000/bus@28380000/i2c@40b00000[0]'
[    0.884854] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/bus@100000/bus@28380000/i2c@40b00000[0]'
[    0.884863] i2c i2c-1: using lookup tables for GPIO lookup
[    0.884866] i2c i2c-1: No GPIO consumer scl found
[    0.884880] i2c i2c-1: GPIO lookup for consumer sda
[    0.884883] i2c i2c-1: using device tree for GPIO lookup
[    0.884886] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/bus@100000/bus@28380000/i2c@40b00000[0]'
[    0.884894] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/bus@100000/bus@28380000/i2c@40b00000[0]'
[    0.884901] i2c i2c-1: using lookup tables for GPIO lookup
[    0.884903] i2c i2c-1: No GPIO consumer sda found
[    0.908588] da9062 1-0048: Entering I2C mode!
[    0.914401] da9062-watchdog: Failed to locate of_node [id: -2]
[    0.920423] da9062-thermal: Failed to locate of_node [id: -2]
[    0.926357] da9062-rtc: Failed to locate of_node [id: -2]
[    0.931921] da9062-onkey: Failed to locate of_node [id: -2]
[    0.937713] da9062-gpio da9062-gpio.6.auto: DMA mask not set
[    0.943517] gpiochip_find_base: found new base at 507
[    0.944417] gpio gpiochip0: (da9062-gpio.6.auto): added GPIO chardev (254:0)
[    0.944443] gpio gpiochip0: registered GPIOs 507 to 511 on da9062-gpio.6.auto
[    0.944637] da9062 1-0058: Entering I2C mode!
[    0.950394] da9062-watchdog: Failed to locate of_node [id: -2]
[    0.956404] da9062-thermal: Failed to locate of_node [id: -2]
[    0.962335] da9062-rtc: Failed to locate of_node [id: -2]
[    0.967900] da9062-onkey: Failed to locate of_node [id: -2]
[    0.973691] da9062-gpio da9062-gpio.13.auto: DMA mask not set
[    0.979578] gpiochip_find_base: found new base at 502
[    0.980453] gpio gpiochip1: (da9062-gpio.13.auto): added GPIO chardev (254:1)
[    0.980482] gpio gpiochip1: registered GPIOs 502 to 506 on da9062-gpio.13.auto
[    0.980525] omap_i2c 40b00000.i2c: bus 1 rev0.12 at 400 kHz
[    0.986795] i2c i2c-0: GPIO lookup for consumer scl
[    0.986801] i2c i2c-0: using device tree for GPIO lookup
[    0.986808] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/bus@100000/bus@28380000/i2c@42120000[0]'
[    0.986819] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/bus@100000/bus@28380000/i2c@42120000[0]'
[    0.986827] i2c i2c-0: using lookup tables for GPIO lookup
[    0.986829] i2c i2c-0: No GPIO consumer scl found
[    0.986843] i2c i2c-0: GPIO lookup for consumer sda
[    0.986846] i2c i2c-0: using device tree for GPIO lookup
[    0.986850] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/bus@100000/bus@28380000/i2c@42120000[0]'
[    0.986858] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/bus@100000/bus@28380000/i2c@42120000[0]'
[    0.986864] i2c i2c-0: using lookup tables for GPIO lookup
[    0.986867] i2c i2c-0: No GPIO consumer sda found
[    0.987247] pca954x 0-0073: GPIO lookup for consumer reset
[    0.987252] pca954x 0-0073: using device tree for GPIO lookup
[    0.987256] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@100000/bus@28380000/i2c@42120000/msd9548@73[0]'
[    0.987266] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@100000/bus@28380000/i2c@42120000/msd9548@73[0]'
[    0.987274] pca954x 0-0073: using lookup tables for GPIO lookup
[    0.987276] pca954x 0-0073: No GPIO consumer reset found
[    1.008038] i2c i2c-0: Added multiplexed i2c bus 2
[    1.013078] i2c i2c-0: Added multiplexed i2c bus 3
[    1.018065] i2c i2c-0: Added multiplexed i2c bus 4
[    1.023052] i2c i2c-0: Added multiplexed i2c bus 5
[    1.028034] i2c i2c-0: Added multiplexed i2c bus 6
[    1.033018] i2c i2c-0: Added multiplexed i2c bus 7
[    1.037998] i2c i2c-0: Added multiplexed i2c bus 8
[    1.043281] i2c i2c-0: Added multiplexed i2c bus 9
[    1.048187] pca954x 0-0073: registered 8 multiplexed busses for I2C switch pca9548
[    1.056024] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz
[    1.062069] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 137 domain created
[    1.070614] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 131 domain created
[    1.079950] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 213 domain created
[    1.088555] ti-sci-inta 33d00000.msi-controller: Interrupt Aggregator domain 209 created
[    1.097147] wiz bus@100000:wiz@5060000: GPIO lookup for consumer typec-dir
[    1.097152] wiz bus@100000:wiz@5060000: using device tree for GPIO lookup
[    1.097160] of_get_named_gpiod_flags: can't parse 'typec-dir-gpios' property of node '/bus@100000/wiz@5060000[0]'
[    1.097169] of_get_named_gpiod_flags: can't parse 'typec-dir-gpio' property of node '/bus@100000/wiz@5060000[0]'
[    1.097176] wiz bus@100000:wiz@5060000: using lookup tables for GPIO lookup
[    1.097179] wiz bus@100000:wiz@5060000: No GPIO consumer typec-dir found
[    1.099551] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,32] sci-dev-id:235
[    1.109446] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled
[    1.116205] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66349100, num_proxies:64
[    1.125884] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[120,200] sci-dev-id:211
[    1.136051] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled
[    1.142812] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66349100, num_proxies:64
[    1.150799] omap8250 40a00000.serial: GPIO lookup for consumer rs485-term
[    1.150806] omap8250 40a00000.serial: using device tree for GPIO lookup
[    1.150814] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@100000/bus@28380000/serial@40a00000[0]'
[    1.150823] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@100000/bus@28380000/serial@40a00000[0]'
[    1.150831] omap8250 40a00000.serial: using lookup tables for GPIO lookup
[    1.150834] omap8250 40a00000.serial: No GPIO consumer rs485-term found
[    1.150849] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 250, base_baud = 6000000) is a 8250
[    1.160370] omap8250 2800000.serial: GPIO lookup for consumer rs485-term
[    1.160376] omap8250 2800000.serial: using device tree for GPIO lookup
[    1.160382] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@100000/serial@2800000[0]'
[    1.160390] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@100000/serial@2800000[0]'
[    1.160396] omap8250 2800000.serial: using lookup tables for GPIO lookup
[    1.160399] omap8250 2800000.serial: No GPIO consumer rs485-term found
[    1.160409] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 251, base_baud = 3000000) is a 8250
[    1.169258] printk: console [ttyS2] enabled
[    1.177701] printk: bootconsole [ns16550a0] disabled
[    1.188162] omap8250 2810000.serial: GPIO lookup for consumer rs485-term
[    1.188167] omap8250 2810000.serial: using device tree for GPIO lookup
[    1.188173] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@100000/serial@2810000[0]'
[    1.188180] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@100000/serial@2810000[0]'
[    1.188186] omap8250 2810000.serial: using lookup tables for GPIO lookup
[    1.188189] omap8250 2810000.serial: No GPIO consumer rs485-term found
[    1.188198] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 252, base_baud = 3000000) is a 8250
[    1.198045] davinci_mdio c000f00.mdio: Configuring MDIO in manual mode
[    1.204721] mdio_bus c000f00.mdio: GPIO lookup for consumer reset
[    1.204725] mdio_bus c000f00.mdio: using device tree for GPIO lookup
[    1.204731] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@100000/ethernet@c000000/mdio@f00[0]'
[    1.204739] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@100000/ethernet@c000000/mdio@f00[0]'
[    1.204747] mdio_bus c000f00.mdio: using lookup tables for GPIO lookup
[    1.204750] mdio_bus c000f00.mdio: No GPIO consumer reset found
[    1.243861] davinci_mdio c000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[    1.252000] mdio_bus c000f00.mdio:03: GPIO lookup for consumer reset
[    1.252005] mdio_bus c000f00.mdio:03: using device tree for GPIO lookup
[    1.252010] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@100000/ethernet@c000000/mdio@f00/ethernet-phy@3[0]'
[    1.252021] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@100000/ethernet@c000000/mdio@f00/ethernet-phy@3[0]'
[    1.252030] mdio_bus c000f00.mdio:03: using lookup tables for GPIO lookup
[    1.252033] mdio_bus c000f00.mdio:03: No GPIO consumer reset found
[    1.254221] davinci_mdio c000f00.mdio: phy[3]: device c000f00.mdio:03, driver RTL8211F-VD-CG Gigabit Ethernet
[    1.264144] am65-cpsw-nuss c000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 5 quirks:00000000
[    1.276904] am65-cpsw-nuss c000000.ethernet: Use random MAC address
[    1.283206] am65-cpsw-nuss c000000.ethernet: initialized cpsw ale version 1.4
[    1.290329] am65-cpsw-nuss c000000.ethernet: ALE Table size 512
[    1.296589] am65-cpsw-nuss c000000.ethernet: CPTS ver 0x4e8a010b, freq:200000000, add_val:4 pps:0
[    1.305896] of_get_named_gpiod_flags: can't parse 'link-gpios' property of node '/bus@100000/ethernet@c000000/ethernet-ports/port@2/fixed-link[0]'
[    1.305910] of_get_named_gpiod_flags: can't parse 'link-gpio' property of node '/bus@100000/ethernet@c000000/ethernet-ports/port@2/fixed-link[0]'
[    1.307341] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a010b, freq:200000000, add_val:4 pps:0
[    1.316323] xhci-hcd xhci-hcd.14.auto: xHCI Host Controller
[    1.321913] xhci-hcd xhci-hcd.14.auto: new USB bus registered, assigned bus number 1
[    1.329770] xhci-hcd xhci-hcd.14.auto: hcc params 0x200073c9 hci version 0x100 quirks 0x0000002000018010
[    1.339253] xhci-hcd xhci-hcd.14.auto: irq 256, io mem 0x06010000
[    1.345448] xhci-hcd xhci-hcd.14.auto: xHCI Host Controller
[    1.351010] xhci-hcd xhci-hcd.14.auto: new USB bus registered, assigned bus number 2
[    1.358738] xhci-hcd xhci-hcd.14.auto: Host supports USB 3.0 SuperSpeed
[    1.365653] hub 1-0:1.0: USB hub found
[    1.369411] hub 1-0:1.0: 1 port detected
[    1.373468] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.381750] hub 2-0:1.0: USB hub found
[    1.385506] hub 2-0:1.0: 1 port detected
[    1.491950] sdhci-am654 4f80000.mmc: GPIO lookup for consumer wp
[    1.491960] sdhci-am654 4f80000.mmc: using device tree for GPIO lookup
[    1.491967] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@100000/mmc@4f80000[0]'
[    1.491978] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@100000/mmc@4f80000[0]'
[    1.491985] sdhci-am654 4f80000.mmc: using lookup tables for GPIO lookup
[    1.491989] sdhci-am654 4f80000.mmc: No GPIO consumer wp found
[    1.492482] mmc0: CQHCI version 5.10
[    1.496265] gpiochip_find_base: found new base at 417
[    1.496393] gpio gpiochip2: (42110000.gpio): added GPIO chardev (254:2)
[    1.496426] gpio gpiochip2: registered GPIOs 417 to 501 on 42110000.gpio
[    1.498110] gpiochip_find_base: found new base at 348
[    1.498127] gpio gpiochip3: Persistence not supported for GPIO 59
[    1.498132] gpio-407 (10G_reset_gpio): hogged as output/high
[    1.503927] gpio gpiochip3: (600000.gpio): added GPIO chardev (254:3)
[    1.503960] gpio gpiochip3: registered GPIOs 348 to 416 on 600000.gpio
[    1.506123] gpio-regulator gpio-regulator-TLV71033: GPIO lookup for consumer (null)
[    1.506130] gpio-regulator gpio-regulator-TLV71033: using device tree for GPIO lookup
[    1.506142] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-regulator-TLV71033[0]' - status (0)
[    1.506154] gpio gpiochip2: Persistence not supported for GPIO 84
[    1.506161] gpio-regulator gpio-regulator-TLV71033: GPIO lookup for consumer enable
[    1.506165] gpio-regulator gpio-regulator-TLV71033: using device tree for GPIO lookup
[    1.506171] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/gpio-regulator-TLV71033[0]'
[    1.506180] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/gpio-regulator-TLV71033[0]'
[    1.506187] gpio-regulator gpio-regulator-TLV71033: using lookup tables for GPIO lookup
[    1.506191] gpio-regulator gpio-regulator-TLV71033: No GPIO consumer enable found
[    1.534562] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 64-bit
[    1.611198] mmc0: Command Queue Engine enabled
[    1.615660] mmc0: new HS200 MMC card at address 0001
[    1.621189] mmcblk0: mmc0:0001 DG4016 14.7 GiB 
[    1.630078]  mmcblk0: p1
[    1.633222] mmcblk0boot0: mmc0:0001 DG4016 4.00 MiB 
[    1.639346] mmcblk0boot1: mmc0:0001 DG4016 4.00 MiB 
[    1.645410] mmcblk0rpmb: mmc0:0001 DG4016 4.00 MiB, chardev (238:0)
[    1.665244] gpiochip_find_base: found new base at 337
[    1.667052] gpio gpiochip4: (tps6594-gpio): added GPIO chardev (254:4)
[    1.667127] gpio gpiochip4: registered GPIOs 337 to 347 on tps6594-gpio
[    1.822157] tps6594-rtc tps6594-rtc.19.auto: registered as rtc0
[    1.828986] tps6594-rtc tps6594-rtc.19.auto: setting system clock to 2000-01-01T00:00:00 UTC (946684800)
[    1.838714] pca953x 9-0021: GPIO lookup for consumer reset
[    1.838751] pca953x 9-0021: using device tree for GPIO lookup
[    1.838766] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@100000/bus@28380000/i2c@42120000/msd9548@73/i2c@7/gpio@21[0]'
[    1.838820] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@100000/bus@28380000/i2c@42120000/msd9548@73/i2c@7/gpio@21[0]'
[    1.838848] pca953x 9-0021: using lookup tables for GPIO lookup
[    1.838852] pca953x 9-0021: No GPIO consumer reset found
[    1.838885] pca953x 9-0021: supply vcc not found, using dummy regulator
[    1.845564] pca953x 9-0021: using no AI
[    1.850383] gpiochip_find_base: found new base at 321
[    1.850408] gpio gpiochip5: Persistence not supported for GPIO 0
[    1.850725] gpio-321 (qsfp_1_top): hogged as output/low
[    1.855989] gpio gpiochip5: Persistence not supported for GPIO 5
[    1.856177] gpio-326 (qsfp_1_bottom): hogged as output/low
[    1.861783] gpio gpiochip5: (9-0021): added GPIO chardev (254:5)
[    1.861815] gpio gpiochip5: registered GPIOs 321 to 336 on 9-0021
[    1.861934] pca953x 9-0020: GPIO lookup for consumer reset
[    1.861939] pca953x 9-0020: using device tree for GPIO lookup
[    1.861945] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@100000/bus@28380000/i2c@42120000/msd9548@73/i2c@7/gpio@20[0]'
[    1.861958] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@100000/bus@28380000/i2c@42120000/msd9548@73/i2c@7/gpio@20[0]'
[    1.861970] pca953x 9-0020: using lookup tables for GPIO lookup
[    1.861973] pca953x 9-0020: No GPIO consumer reset found
[    1.861988] pca953x 9-0020: supply vcc not found, using dummy regulator
[    1.868687] pca953x 9-0020: using no AI
[    1.873443] gpiochip_find_base: found new base at 305
[    1.873455] gpio gpiochip6: Persistence not supported for GPIO 0
[    1.873773] gpio-305 (qsfp_2_top): hogged as output/low
[    1.878994] gpio gpiochip6: Persistence not supported for GPIO 5
[    1.879180] gpio-310 (qsfp_2_bottom): hogged as output/low
[    1.884752] gpio gpiochip6: (9-0020): added GPIO chardev (254:6)
[    1.884777] gpio gpiochip6: registered GPIOs 305 to 320 on 9-0020
[    1.885139] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fc8900
[    1.891955] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fc8900
[    1.899472] j721e-pcie-host 2910000.pcie: host bridge /bus@100000/pcie@2910000 ranges:
[    1.907407] j721e-pcie-host 2910000.pcie:       IO 0x0018001000..0x0018010fff -> 0x0018001000
[    1.915929] j721e-pcie-host 2910000.pcie:      MEM 0x0018011000..0x001fffffff -> 0x0018011000
[    1.924446] j721e-pcie-host 2910000.pcie:   IB MEM 0x0000000000..0xffffffffffff -> 0x0000000000
[    1.933260] j721e-pcie-host 2910000.pcie: GPIO lookup for consumer reset
[    1.933264] j721e-pcie-host 2910000.pcie: using device tree for GPIO lookup
[    1.933277] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/bus@100000/pcie@2910000[0]' - status (0)
[    1.933288] gpio gpiochip3: Persistence not supported for GPIO 18
[    2.034618] j721e-pcie-host 2910000.pcie: Link up
[    2.039509] j721e-pcie-host 2910000.pcie: PCI host bridge to bus 0000:00
[    2.046216] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.051725] pci_bus 0000:00: root bus resource [io  0x0000-0xffff] (bus address [0x18001000-0x18010fff])
[    2.061201] pci_bus 0000:00: root bus resource [mem 0x18011000-0x1fffffff]
[    2.068105] pci 0000:00:00.0: [104c:b00f] type 01 class 0x060400
[    2.074253] pci 0000:00:00.0: supports D1
[    2.078274] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    2.084047] pci 0000:00:00.0: reg 0x224: [mem 0x00000000-0x003fffff 64bit]
[    2.090923] pci 0000:00:00.0: VF(n) BAR0 space: [mem 0x00000000-0x00ffffff 64bit] (contains BAR0 for 4 VFs)
[    2.103476] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.111636] pci 0000:01:00.0: [10ee:9032] type 00 class 0x050100
[    2.117684] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x01ffffff]
[    2.123969] pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    2.130776] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    2.137425] pci 0000:00:00.0: BAR 14: assigned [mem 0x19000000-0x1bffffff]
[    2.144305] pci 0000:00:00.0: BAR 7: assigned [mem 0x1c000000-0x1cffffff 64bit]
[    2.151620] pci 0000:01:00.0: BAR 0: assigned [mem 0x1a000000-0x1bffffff]
[    2.158413] pci 0000:01:00.0: BAR 1: assigned [mem 0x19000000-0x1900ffff]
[    2.165206] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.170172] pci 0000:00:00.0:   bridge window [mem 0x19000000-0x1bffffff]
[    2.177124] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[    2.183476] pcieport 0000:00:00.0: PME: Signaling with IRQ 519
[    2.189682] pcieport 0000:00:00.0: AER: enabled with IRQ 519
[    2.197865] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8)
[    2.209410] ti-udma 31150000.dma-controller: Channels: 50 (tchan: 25, rchan: 25, gp-rflow: 8)
[    2.220965] tpm_tis_spi: probe of spi0.3 failed with error -110
[    2.227283] davinci_mdio c000f00.mdio: Configuring MDIO in manual mode
[    2.235402] mdio_bus c000f00.mdio: GPIO lookup for consumer reset
[    2.235412] mdio_bus c000f00.mdio: using device tree for GPIO lookup
[    2.235447] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@100000/ethernet@c000000/mdio@f00[0]'
[    2.235471] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@100000/ethernet@c000000/mdio@f00[0]'
[    2.235492] mdio_bus c000f00.mdio: using lookup tables for GPIO lookup
[    2.235511] mdio_bus c000f00.mdio: No GPIO consumer reset found
[    2.271874] davinci_mdio c000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[    2.280278] mdio_bus c000f00.mdio:03: GPIO lookup for consumer reset
[    2.280290] mdio_bus c000f00.mdio:03: using device tree for GPIO lookup
[    2.280303] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@100000/ethernet@c000000/mdio@f00/ethernet-phy@3[0]'
[    2.280331] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@100000/ethernet@c000000/mdio@f00/ethernet-phy@3[0]'
[    2.280352] mdio_bus c000f00.mdio:03: using lookup tables for GPIO lookup
[    2.280359] mdio_bus c000f00.mdio:03: No GPIO consumer reset found
[    2.283046] davinci_mdio c000f00.mdio: phy[3]: device c000f00.mdio:03, driver RTL8211F-VD-CG Gigabit Ethernet
[    2.293014] am65-cpsw-nuss c000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 5 quirks:00000000
[    2.305879] am65-cpsw-nuss c000000.ethernet: Use random MAC address
[    2.312227] am65-cpsw-nuss c000000.ethernet: initialized cpsw ale version 1.4
[    2.319361] am65-cpsw-nuss c000000.ethernet: ALE Table size 512
[    2.325873] am65-cpsw-nuss c000000.ethernet: CPTS ver 0x4e8a010b, freq:200000000, add_val:4 pps:0
[    2.335194] of_get_named_gpiod_flags: can't parse 'link-gpios' property of node '/bus@100000/ethernet@c000000/ethernet-ports/port@2/fixed-link[0]'
[    2.335209] of_get_named_gpiod_flags: can't parse 'link-gpio' property of node '/bus@100000/ethernet@c000000/ethernet-ports/port@2/fixed-link[0]'
[    2.338659] am65-cpsw-nuss c000000.ethernet: set new flow-id-base 60
[    2.346757] pca953x 3-0020: GPIO lookup for consumer reset
[    2.346766] pca953x 3-0020: using device tree for GPIO lookup
[    2.346773] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@100000/bus@28380000/i2c@42120000/msd9548@73/i2c@1/gpio@20[0]'
[    2.346795] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@100000/bus@28380000/i2c@42120000/msd9548@73/i2c@1/gpio@20[0]'
[    2.346807] pca953x 3-0020: using lookup tables for GPIO lookup
[    2.346810] pca953x 3-0020: No GPIO consumer reset found
[    2.346833] pca953x 3-0020: supply vcc not found, using dummy regulator
[    2.347117] sdhci-am654 4fb0000.mmc: GPIO lookup for consumer cd
[    2.353453] sdhci-am654 4fb0000.mmc: using device tree for GPIO lookup
[    2.353460] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@100000/mmc@4fb0000[0]'
[    2.353470] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@100000/mmc@4fb0000[0]'
[    2.353477] sdhci-am654 4fb0000.mmc: using lookup tables for GPIO lookup
[    2.353480] sdhci-am654 4fb0000.mmc: No GPIO consumer cd found
[    2.353484] sdhci-am654 4fb0000.mmc: GPIO lookup for consumer wp
[    2.353486] sdhci-am654 4fb0000.mmc: using device tree for GPIO lookup
[    2.353490] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@100000/mmc@4fb0000[0]'
[    2.353497] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@100000/mmc@4fb0000[0]'
[    2.353502] sdhci-am654 4fb0000.mmc: using lookup tables for GPIO lookup
[    2.353505] sdhci-am654 4fb0000.mmc: No GPIO consumer wp found
[    2.353524] pca953x 3-0020: using no AI
[    2.353703] mmc1: CQHCI version 5.10
[    2.361757] gpiochip_find_base: found new base at 289
[    2.361776] gpio gpiochip7: Persistence not supported for GPIO 12
[    2.362091] gpio-301 (usb_power): hogged as output/high
[    2.367433] gpio gpiochip7: (3-0020): added GPIO chardev (254:7)
[    2.367465] gpio gpiochip7: registered GPIOs 289 to 304 on 3-0020
[    2.368097] debugfs: Directory 'pd:240' with parent 'pm_genpd' already present!
[    2.376246] 
               BSP Info:
[    2.379998]  BSP Version     : iW-PRHEZ-SC-01-R2.1-REL0.1-XD2.0-V24.1-Linux6.1.80
[    2.382632] 
               OSM Info:
[    2.393492]  OSM Version     : iG-PRHYZ-01-R1.1-CR24-1800003
[    2.398497] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit
[    2.398861]  BSP Version (Shipped)   : iG-PRHEZ-SC-01-R1.0-REL1.0-XD1.0-V24.1-Linux6.1.80
[    2.414298]  PORT3 MAC Address       : fc:c2:3d:57:52:cf
[    2.414301]  EEPROM Unique ID        : 0x1690880c34100010b05ba080a08000b4
[    2.422293] 
               SOM Info:
[    2.432232]  SOM Version     : iG-PRHEZ-01-R1.0-CR24-3000001
[    2.437602]  BSP Version (Shipped)   : iG-PRHEZ-SC-01-R1.0-REL1.0-XD1.0-V24.1-Linux6.1.80
[    2.445648]  PORT1 MAC Address       : fc:c2:3d:57:53:3c
[    2.445651]  PL Unique ID    : 0x40020000012987650580c1c5
[    2.450494]  SOM EEPROM Unique ID    : 0x1690880c34100010b05ca080a08000a1
[    2.456138]  Carrier Version : iW-PRGXD-AP-01-R2.0
[    2.467494]  Carrier Card EEPROM is not programmed
[    2.477143] ALSA device list:
[    2.480139]   No soundcards found.
[    2.483899] Waiting for root device /dev/mmcblk1p2...
[    2.517667] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[    2.525099] mmcblk1: mmc1:aaaa SC16G 14.8 GiB 
[    2.534588]  mmcblk1: p1 p2
[    2.732019] EXT4-fs (mmcblk1p2): recovery complete
[    2.737610] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Quota mode: none.
[    2.746190] VFS: Mounted root (ext4 filesystem) on device 179:98.
[    2.752377] devtmpfs: mounted
[    2.756839] Freeing unused kernel memory: 2048K
[    2.761519] Run /sbin/init as init process
[    2.765622]   with arguments:
[    2.765625]     /sbin/init
[    2.765628]   with environment:
[    2.765631]     HOME=/
[    2.765634]     TERM=linux
[    2.903198] systemd[1]: System time before build time, advancing clock.
[    2.944829] NET: Registered PF_INET6 protocol family
[    2.950643] Segment Routing with IPv6
[    2.954328] In-situ OAM (IOAM) with IPv6
[    2.978420] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LI)
[    3.009973] systemd[1]: Detected architecture arm64.
[    3.070769] systemd[1]: Hostname set to <j7200-iwg52m>.
[    3.162691] systemd-sysv-generator[154]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to .
[    3.309263] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the sett.
[    3.357028] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the s.
[    3.412288] systemd[1]: Queued start job for default target Graphical Interface.
[    3.456371] systemd[1]: Created slice Slice /system/getty.
[    3.477693] systemd[1]: Created slice Slice /system/modprobe.
[    3.501904] systemd[1]: Created slice Slice /system/serial-getty.
[    3.526053] systemd[1]: Created slice User and Session Slice.
[    3.548367] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.572260] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.596373] systemd[1]: Reached target Path Units.
[    3.612039] systemd[1]: Reached target Remote File Systems.
[    3.632011] systemd[1]: Reached target Slice Units.
[    3.648032] systemd[1]: Reached target Swaps.
[    3.702140] systemd[1]: Listening on RPCbind Server Activation Socket.
[    3.724115] systemd[1]: Reached target RPC Port Mapper.
[    3.752381] systemd[1]: Listening on Process Core Dump Socket.
[    3.776321] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    3.800665] systemd[1]: Listening on Journal Audit Socket.
[    3.824533] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.848563] systemd[1]: Listening on Journal Socket.
[    3.864671] systemd[1]: Listening on Network Service Netlink Socket.
[    3.888639] systemd[1]: Listening on udev Control Socket.
[    3.908407] systemd[1]: Listening on udev Kernel Socket.
[    3.928456] systemd[1]: Listening on User Database Manager Socket.
[    3.968346] systemd[1]: Mounting Huge Pages File System...
[    3.993111] systemd[1]: Mounting POSIX Message Queue File System...
[    4.021119] systemd[1]: Mounting Kernel Debug File System...
[    4.048416] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing).
[    4.092312] systemd[1]: Mounting Temporary Directory /tmp...
[    4.118317] systemd[1]: Starting Create List of Static Device Nodes...
[    4.144565] systemd[1]: Starting Load Kernel Module configfs...
[    4.172577] systemd[1]: Starting Load Kernel Module drm...
[    4.208663] systemd[1]: Starting Load Kernel Module fuse...
[    4.224346] fuse: init (API version 7.37)
[    4.256545] systemd[1]: Starting RPC Bind...
[    4.276243] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[    4.312775] systemd[1]: Starting Journal Service...
[    4.335456] systemd[1]: Starting Load Kernel Modules...
[    4.360700] systemd[1]: Starting Generate network units from Kernel command line...
[    4.370543] cryptodev: loading out-of-tree module taints kernel.
[    4.381693] cryptodev: driver 1.12 loaded.
[    4.404758] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.425314] systemd[1]: Starting Coldplug All udev Devices...
[    4.439679] EXT4-fs (mmcblk1p2): re-mounted. Quota mode: none.
[    4.462445] systemd[1]: Started RPC Bind.
[    4.488518] systemd[1]: Mounted Huge Pages File System.
[    4.508425] systemd[1]: Mounted POSIX Message Queue File System.
[    4.536432] systemd[1]: Started Journal Service.
[    4.782773] systemd-journald[168]: Received client request to flush runtime journal.
[    5.013230] audit: type=1334 audit(1651167747.108:2): prog-id=5 op=LOAD
[    5.020453] audit: type=1334 audit(1651167747.116:3): prog-id=6 op=LOAD
[    5.554155] random: crng init done
[    5.630689] at24 1-0052: supply vcc not found, using dummy regulator
[    5.642899] at24 1-0052: GPIO lookup for consumer wp
[    5.642910] at24 1-0052: using device tree for GPIO lookup
[    5.642920] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@100000/bus@28380000/i2c@40b00000/eeprom@52[0]'
[    5.642934] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@100000/bus@28380000/i2c@40b00000/eeprom@52[0]'
[    5.642945] at24 1-0052: using lookup tables for GPIO lookup
[    5.642949] at24 1-0052: No GPIO consumer wp found
[    5.644574] at24 1-0052: 256 byte 24mac402 EEPROM, read-only
[    5.655111] at24 1-0050: supply vcc not found, using dummy regulator
[    5.662284] at24 1-0050: GPIO lookup for consumer wp
[    5.662292] at24 1-0050: using device tree for GPIO lookup
[    5.662303] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@100000/bus@28380000/i2c@40b00000/eeprom@50[0]'
[    5.662463] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@100000/bus@28380000/i2c@40b00000/eeprom@50[0]'
[    5.662479] at24 1-0050: using lookup tables for GPIO lookup
[    5.662483] at24 1-0050: No GPIO consumer wp found
[    5.662799] at24 1-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
[    5.678326] at24 0-0054: supply vcc not found, using dummy regulator
[    5.697971] at24 0-0054: GPIO lookup for consumer wp
[    5.697982] at24 0-0054: using device tree for GPIO lookup
[    5.697990] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@100000/bus@28380000/i2c@42120000/eeprom@54[0]'
[    5.698007] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@100000/bus@28380000/i2c@42120000/eeprom@54[0]'
[    5.698019] at24 0-0054: using lookup tables for GPIO lookup
[    5.698022] at24 0-0054: No GPIO consumer wp found
[    5.698372] at24 0-0054: 256 byte 24mac402 EEPROM, read-only
[    5.768816] typec_fusb302 9-0022: supply vbus not found, using dummy regulator
[    5.773957] platform 41000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1)
[    5.790000] typec_fusb302 9-0022: GPIO lookup for consumer fcs,int_n
[    5.790011] typec_fusb302 9-0022: using device tree for GPIO lookup
[    5.790022] of_get_named_gpiod_flags: can't parse 'fcs,int_n-gpios' property of node '/bus@100000/bus@28380000/i2c@42120000/msd9548@73/i2c@7/typec-portc@22[0]'
[    5.790042] of_get_named_gpiod_flags: can't parse 'fcs,int_n-gpio' property of node '/bus@100000/bus@28380000/i2c@42120000/msd9548@73/i2c@7/typec-portc@22[0]'
[    5.790063] of_get_named_gpiod_flags: parsed 'fcs,int_n' property of node '/bus@100000/bus@28380000/i2c@42120000/msd9548@73/i2c@7/typec-portc@22[0]' - status (0)
[    5.790082] gpio gpiochip7: Persistence not supported for GPIO 15
[    5.791049] of_get_named_gpiod_flags: can't parse 'fcs,power_en' property of node '/bus@100000/bus@28380000/i2c@42120000/msd9548@73/i2c@7/typec-portc@22[0]'
[    5.794986] platform 41000000.r5f: configured R5F for IPC-only mode
[    5.795176] OF: graph: no port node found in /bus@100000/bus@28380000/i2c@42120000/msd9548@73/i2c@7/typec-portc@22
[    5.809499] platform 41000000.r5f: assigned reserved memory node r5f-dma-memory@a0000000
[    5.823481] remoteproc remoteproc0: 41000000.r5f is available
[    5.834202] remoteproc remoteproc0: attaching to 41000000.r5f
[    5.843347] platform 41000000.r5f: R5F core initialized in IPC-only mode
[    5.855085] rproc-virtio rproc-virtio.21.auto: assigned reserved memory node r5f-dma-memory@a0000000
[    5.868212] virtio_rpmsg_bus virtio0: rpmsg host is online
[    5.873089] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd
[    5.873900] rproc-virtio rproc-virtio.21.auto: registered virtio0 (type 7)
[    5.883476] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe
[    5.888182] remoteproc remoteproc0: remote processor 41000000.r5f is now attached
[    5.929443] invalid GPIO -2
[    5.932744] platform 41400000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1)
[    5.945929] invalid GPIO -2
[    5.960681] platform 41400000.r5f: configured R5F for IPC-only mode
[    6.048436] platform 41400000.r5f: assigned reserved memory node r5f-dma-memory@a1000000
[    6.115839] remoteproc remoteproc1: 41400000.r5f is available
[    6.158595] remoteproc remoteproc1: attaching to 41400000.r5f
[    6.177544] platform 41400000.r5f: R5F core initialized in IPC-only mode
[    6.212174] rproc-virtio rproc-virtio.22.auto: assigned reserved memory node r5f-dma-memory@a1000000
[    6.224173] virtio_rpmsg_bus virtio1: rpmsg host is online
[    6.231204] virtio_rpmsg_bus virtio1: creating channel ti.ipc4.ping-pong addr 0xd
[    6.241287] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xe
[    6.282967] rproc-virtio rproc-virtio.22.auto: registered virtio1 (type 7)
[    6.291545] remoteproc remoteproc1: remote processor 41400000.r5f is now attached
[    6.312022] platform 5c00000.r5f: configured R5F for IPC-only mode
[    6.321264] platform 5c00000.r5f: assigned reserved memory node r5f-dma-memory@a2000000
[    6.338039] remoteproc remoteproc2: 5c00000.r5f is available
[    6.352795] remoteproc remoteproc2: attaching to 5c00000.r5f
[    6.372156] platform 5c00000.r5f: R5F core initialized in IPC-only mode
[    6.395582] rproc-virtio rproc-virtio.23.auto: assigned reserved memory node r5f-dma-memory@a2000000
[    6.451328] virtio_rpmsg_bus virtio2: rpmsg host is online
[    6.457188] virtio_rpmsg_bus virtio2: creating channel ti.ipc4.ping-pong addr 0xd
[    6.467172] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0xe
[    6.498529] rproc-virtio rproc-virtio.23.auto: registered virtio2 (type 7)
[    6.507659] remoteproc remoteproc2: remote processor 5c00000.r5f is now attached
[    6.521828] platform 5d00000.r5f: configured R5F for IPC-only mode
[    6.535251] platform 5d00000.r5f: assigned reserved memory node r5f-dma-memory@a3000000
[    6.553470] remoteproc remoteproc3: 5d00000.r5f is available
[    6.566351] remoteproc remoteproc3: attaching to 5d00000.r5f
[    6.578642] platform 5d00000.r5f: R5F core initialized in IPC-only mode
[    6.586037] rproc-virtio rproc-virtio.24.auto: assigned reserved memory node r5f-dma-memory@a3000000
[    6.601037] virtio_rpmsg_bus virtio3: rpmsg host is online
[    6.607130] rproc-virtio rproc-virtio.24.auto: registered virtio3 (type 7)
[    6.609082] virtio_rpmsg_bus virtio3: creating channel ti.ipc4.ping-pong addr 0xd
[    6.615259] remoteproc remoteproc3: remote processor 5d00000.r5f is now attached
[    6.625666] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0xe
[    7.104201] audit: type=1334 audit(1651168644.060:4): prog-id=7 op=LOAD
[    7.111227] audit: type=1334 audit(1651168644.064:5): prog-id=8 op=LOAD
[    7.606302] audit: type=1334 audit(1651168644.560:6): prog-id=9 op=LOAD
[    7.619968] audit: type=1334 audit(1651168644.576:7): prog-id=10 op=LOAD
[    8.005469] Bluetooth: Core ver 2.22
[    8.009196] NET: Registered PF_BLUETOOTH protocol family
[    8.019907] Bluetooth: HCI device and connection manager initialized
[    8.031648] Bluetooth: HCI socket layer initialized
[    8.031660] Bluetooth: L2CAP socket layer initialized
[    8.031676] Bluetooth: SCO socket layer initialized
[    8.104306] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    8.132892] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    8.140068] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    8.315991] am65-cpsw-nuss c000000.ethernet eth1: PHY [c000f00.mdio:03] driver [RTL8211F-VD-CG Gigabit Ethernet] (irq=POLL)
[    8.337385] am65-cpsw-nuss c000000.ethernet eth1: configuring for phy/rgmii-id link mode
[    8.399896] am65-cpsw-nuss c000000.ethernet eth0: configuring for fixed/rgmii link mode
[    8.414307] am65-cpsw-nuss c000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[    8.426184] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    8.925674] audit: type=1334 audit(1651168645.880:8): prog-id=11 op=LOAD
[    8.934459] audit: type=1334 audit(1651168645.888:9): prog-id=12 op=LOAD
[    9.337623] audit: type=1006 audit(1651168646.292:10): pid=570 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
[    9.355578] audit: type=1300 audit(1651168646.292:10): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffd8dad1d8 a2=4 a3=ffff80383020 items=0 ppid=1 pid=570 auid=1000 uid=0 gid=0 euid=0 suid=0 f)
[    9.412448] audit: type=1327 audit(1651168646.292:10): proctitle="(systemd)"
[    9.807581] audit: type=1006 audit(1651168646.760:11): pid=560 uid=0 old-auid=4294967295 auid=1000 tty=tty7 old-ses=4294967295 ses=2 res=1
[   18.861722] kauditd_printk_skb: 2 callbacks suppressed
[   18.861730] audit: type=1006 audit(1651168655.816:12): pid=956 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1
[   18.888231] audit: type=1300 audit(1651168655.816:12): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=ffffd8dad1d8 a2=1 a3=ffff80383020 items=0 ppid=1 pid=956 auid=0 uid=0 gid=0 euid=0 suid=0 fsui)
[   18.931926] audit: type=1327 audit(1651168655.816:12): proctitle="(systemd)"
[   18.943965] audit: type=1334 audit(1651168655.844:13): prog-id=13 op=LOAD
[   18.950805] audit: type=1300 audit(1651168655.844:13): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=ffffd5f14750 a2=78 a3=0 items=0 ppid=1 pid=956 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=)
[   18.999904] audit: type=1327 audit(1651168655.844:13): proctitle="(systemd)"
[   19.011889] audit: type=1334 audit(1651168655.876:14): prog-id=13 op=UNLOAD
[   19.023882] audit: type=1334 audit(1651168655.876:15): prog-id=14 op=LOAD
[   19.030675] audit: type=1300 audit(1651168655.876:15): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=ffffd5f147f0 a2=78 a3=0 items=0 ppid=1 pid=956 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=)
[   19.075904] audit: type=1327 audit(1651168655.876:15): proctitle="(systemd)"