SBL Revision: 01.00.10.01 (Aug 19 2022 - 01:55:59) TIFS ver: 22.1.1--v2022.01 (Terrific Llam Starting Sciserver..... PASSED MCU R5F App started at 0 usecs PMIC initialization done. IPC_echo_test (core : mcu1_0) ..... IPC Driver Revision: 01.00.00.01 Waiting for Linux VDev ready... IPC Task started at 215003 usecs and finished at 2296194 usecs ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒*▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒MCU only app: Trying to access MAIN domain peripherals... MCU only app: Writing to DDR... MCU only app: Reading from DDR... MCU only app: Read value matches the value written for DDR! MCU only app: Writing to MSMC... MCU only app: Reading from MSMC... MCU only app: Read value matches the value written for MSMC! MCU only app: Reading MAIN MCAN0 Revision register... MCU only app: MAIN MCAN0 MCANSS_PID = 0x68e04901 MCU only app: #########################MCU ONLY -> ACTIVE MODE DONE########################## MCU only app: STATE INFO :: CURRENTLY IN ACTIVE MODE! MCU only app: LED LD5 should be ON MCU only app: Expected values in ACTIVE mode: TP133: HIGH TP134: HIGH MCU Only Task started at 43916002 usecs and finished at 67035002 usecs IPC_echo_test (core : mcu1_0) ..... IPC Driver Revision: 01.00.00.01 Waiting for Linux VDev ready... IPC Task started at 67111003 usecs and finished at 69194197 usecs Calling Sciclient_procBootRequestProcessor, ProcId 0x20... Loading BootImage Invalid magic number in Single image header Error parsing Main Domain appimage Error parsing A72 appimage #1 for HLOS boot BootImage completed, status = -1 Failure during image copy and parsing Sleeping for 30 seconds after each stage Boot App: Failure occurred in boot sequence MCU Boot Task started at 74299001 usecs and finished at 108674002 usecs Calling rpmsg_exit_responseTask Exiting rpmsg_vdevMonitorFxn! responder task should have exited MCU only app: Inside MCU ONLY task! MCU only app: Disabling MAXT_OUTRG_EN for TMPSENS1:4 in MAIN domain! MCU only app: STATE INFO :: CURRENTLY IN ACTIVE MODE! MCU only app: LED LD5 should be ON MCU only app: Sleeping for 10s, please measure TP133 and TP134! MCU only app: Expected values in ACTIVE mode: TP133: HIGH TP134: HIGH MCU only app: ############################ACTIVE -> MCU ONLY MODE############################ MCU only app: Issueing a SW reset to the MAIN domain... MCU only app: Enabling MAIN domain deep sleep isolation... MCU only app: PMIC STATE CHANGE: ACTIVE -> MCU ONLY... MCU only app: INT_TOP = 0x10 MCU only app: INT_STARTUP = 0x0 MCU only app: INT_GPIO = 0x0 MCU only app: INT_GPIO1_8 = 0x0 MCU only app: Read FSM_NSLEEP_TRIGGERS = 0x3 MCU only app: Write FSM_NSLEEP_TRIGGERS = 0x2 MCU only app: Read FSM_NSLEEP_TRIGGERS = 0x2 MCU only app: Write INT_STARTUP = 0x2 MCU only app: INT_TOP = 0x10 MCU only app: Write INT_STARTUP = 0xc8 MCU only app: INT_GPIO = 0x0 MCU only app: INT_TOP = 0x10 MCU only app: Write INT_GPIO = 0x2 MCU only app: Final Read INT_TOP = 0x10 MCU only app: Final Read FSM_NSLEEP_TRIGGERS = 0x2 MCU only app: PMIC STATE CHANGE: ACTIVE -> MCU ONLY...Done MCU only app: #########################ACTIVE -> MCU ONLY MODE DONE########################## MCU only app: STATE INFO :: NOW IN MCU ONLY MODE! MCU only app: LED LD5 should be OFF MCU only app: Sleeping for 10s, please measure TP133 and TP134! MCU only app: Expected values in MCU ONLY mode: TP133: HIGH TP134: LOW MCU only app: ############################MCU ONLY -> ACTIVE MODE############################ MCU only app: PMIC STATE CHANGE: MCU ONLY -> ACTIVE... MCU only app: INT_TOP = 0x10 MCU only app: Write CONFIG_1 = 0xc0 MCU only app: Write FSM_NSLEEP_TRIGGERS = 0x3 MCU only app: Write CONFIG_1 = 0x0 MCU only app: Read FSM_NSLEEP_TRIGGERS = 0x3 MCU only app: PMIC STATE CHANGE: MCU ONLY -> ACTIVE...Done MCU only app: Disabling MAIN domain deep sleep isolation... MCU only app: Configure WKUPMCU2MAIN and MAIN2WKUPMCU Bridges... MCU only app: WKUPMCU2MAIN and MAIN2WKUPMCU Bridges configured successfully! MCU only app: Configuring Sciclient_board for MAIN domain MCU only app: Doing board init... MCU only app: Trying to access MAIN domain peripherals... MCU only app: Writing to DDR... MCU only app: Reading from DDR... MCU only app: Read value matches the value written for DDR! MCU only app: Writing to MSMC... MCU only app: Reading from MSMC... MCU only app: Read value matches the value written for MSMC! MCU only app: Reading MAIN MCAN0 Revision register... MCU only app: MAIN MCAN0 MCANSS_PID = 0x68e04901 MCU only app: #########################MCU ONLY -> ACTIVE MODE DONE########################## MCU only app: STATE INFO :: CURRENTLY IN ACTIVE MODE! MCU only app: LED LD5 should be ON MCU only app: Expected values in ACTIVE mode: TP133: HIGH TP134: HIGH MCU Only Task started at 110819002 usecs and finished at 133937002 usecs IPC_echo_test (core : mcu1_0) ..... IPC Driver Revision: 01.00.00.01 Waiting for Linux VDev ready... IPC Task started at 134015003 usecs and finished at 136098205 usecs Calling Sciclient_procBootRequestProcessor, ProcId 0x20... Loading BootImage Invalid magic number in Single image header Error parsing Main Domain appimage Error parsing A72 appimage #1 for HLOS boot BootImage completed, status = -1 Failure during image copy and parsing Sleeping for 30 seconds after each stage Boot App: Failure occurred in boot sequence MCU Boot Task started at 141205001 usecs and finished at 175580002 usecs Calling rpmsg_exit_responseTask Exiting rpmsg_vdevMonitorFxn! responder task should have exited MCU only app: Inside MCU ONLY task! MCU only app: Disabling MAXT_OUTRG_EN for TMPSENS1:4 in MAIN domain! MCU only app: STATE INFO :: CURRENTLY IN ACTIVE MODE! MCU only app: LED LD5 should be ON MCU only app: Sleeping for 10s, please measure TP133 and TP134! MCU only app: Expected values in ACTIVE mode: TP133: HIGH TP134: HIGH MCU only app: ############################ACTIVE -> MCU ONLY MODE############################ MCU only app: Issueing a SW reset to the MAIN domain... MCU only app: Enabling MAIN domain deep sleep isolation... MCU only app: PMIC STATE CHANGE: ACTIVE -> MCU ONLY... MCU only app: INT_TOP = 0x10 MCU only app: INT_STARTUP = 0x0 MCU only app: INT_GPIO = 0x0 MCU only app: INT_GPIO1_8 = 0x0 MCU only app: Read FSM_NSLEEP_TRIGGERS = 0x3 MCU only app: Write FSM_NSLEEP_TRIGGERS = 0x2 MCU only app: Read FSM_NSLEEP_TRIGGERS = 0x2 MCU only app: Write INT_STARTUP = 0x2 MCU only app: INT_TOP = 0x10 MCU only app: Write INT_STARTUP = 0xc8 MCU only app: INT_GPIO = 0x0 MCU only app: INT_TOP = 0x10 MCU only app: Write INT_GPIO = 0x2 MCU only app: Final Read INT_TOP = 0x10 MCU only app: Final Read FSM_NSLEEP_TRIGGERS = 0x2 MCU only app: PMIC STATE CHANGE: ACTIVE -> MCU ONLY...Done MCU only app: #########################ACTIVE -> MCU ONLY MODE DONE########################## MCU only app: STATE INFO :: NOW IN MCU ONLY MODE! MCU only app: LED LD5 should be OFF MCU only app: Sleeping for 10s, please measure TP133 and TP134! MCU only app: Expected values in MCU ONLY mode: TP133: HIGH TP134: LOW MCU only app: ############################MCU ONLY -> ACTIVE MODE############################ MCU only app: PMIC STATE CHANGE: MCU ONLY -> ACTIVE... MCU only app: INT_TOP = 0x10 MCU only app: Write CONFIG_1 = 0xc0 MCU only app: Write FSM_NSLEEP_TRIGGERS = 0x3 MCU only app: Write CONFIG_1 = 0x0 MCU only app: Read FSM_NSLEEP_TRIGGERS = 0x3 MCU only app: PMIC STATE CHANGE: MCU ONLY -> ACTIVE...Done MCU only app: Disabling MAIN domain deep sleep isolation... MCU only app: Configure WKUPMCU2MAIN and MAIN2WKUPMCU Bridges... MCU only app: WKUPMCU2MAIN and MAIN2WKUPMCU Bridges configured successfully! MCU only app: Configuring Sciclient_board for MAIN domain MCU only app: Doing board init... MCU only app: Trying to access MAIN domain peripherals... MCU only app: Writing to DDR... MCU only app: Reading from DDR... MCU only app: Read value matches the value written for DDR! MCU only app: Writing to MSMC... MCU only app: Reading from MSMC... MCU only app: Read value matches the value written for MSMC! MCU only app: Reading MAIN MCAN0 Revision register... MCU only app: MAIN MCAN0 MCANSS_PID = 0x68e04901 MCU only app: #########################MCU ONLY -> ACTIVE MODE DONE########################## MCU only app: STATE INFO :: CURRENTLY IN ACTIVE MODE! MCU only app: LED LD5 should be ON MCU only app: Expected values in ACTIVE mode: TP133: HIGH TP134: HIGH MCU Only Task started at 177726002 usecs and finished at 200844002 usecs IPC_echo_test (core : mcu1_0) ..... IPC Driver Revision: 01.00.00.01 Waiting for Linux VDev ready... IPC Task started at 200922003 usecs and finished at 203005212 usecs Calling Sciclient_procBootRequestProcessor, ProcId 0x20... Loading BootImage Invalid magic number in Single image header Error parsing Main Domain appimage Error parsing A72 appimage #1 for HLOS boot BootImage completed, status = -1 Failure during image copy and parsing Sleeping for 30 seconds after each stage Boot App: Failure occurred in boot sequence MCU Boot Task started at 208112001 usecs and finished at 242487003 usecs Calling rpmsg_exit_responseTask Exiting rpmsg_vdevMonitorFxn! responder task should have exited MCU only app: Inside MCU ONLY task! MCU only app: Disabling MAXT_OUTRG_EN for TMPSENS1:4 in MAIN domain! MCU only app: STATE INFO :: CURRENTLY IN ACTIVE MODE! MCU only app: LED LD5 should be ON MCU only app: Sleeping for 10s, please measure TP133 and TP134! MCU only app: Expected values in ACTIVE mode: TP133: HIGH TP134: HIGH MCU only app: ############################ACTIVE -> MCU ONLY MODE############################ MCU only app: Issueing a SW reset to the MAIN domain... MCU only app: Enabling MAIN domain deep sleep isolation... MCU only app: PMIC STATE CHANGE: ACTIVE -> MCU ONLY... MCU only app: INT_TOP = 0x10 MCU only app: INT_STARTUP = 0x0 MCU only app: INT_GPIO = 0x0 MCU only app: INT_GPIO1_8 = 0x0 MCU only app: Read FSM_NSLEEP_TRIGGERS = 0x3 MCU only app: Write FSM_NSLEEP_TRIGGERS = 0x2 MCU only app: Read FSM_NSLEEP_TRIGGERS = 0x2 MCU only app: Write INT_STARTUP = 0x2 MCU only app: INT_TOP = 0x10 MCU only app: Write INT_STARTUP = 0xc8 MCU only app: INT_GPIO = 0x0 MCU only app: INT_TOP = 0x10 MCU only app: Write INT_GPIO = 0x2 MCU only app: Final Read INT_TOP = 0x10 MCU only app: Final Read FSM_NSLEEP_TRIGGERS = 0x2 MCU only app: PMIC STATE CHANGE: ACTIVE -> MCU ONLY...Done MCU only app: #########################ACTIVE -> MCU ONLY MODE DONE########################## MCU only app: STATE INFO :: NOW IN MCU ONLY MODE! MCU only app: LED LD5 should be OFF MCU only app: Sleeping for 10s, please measure TP133 and TP134! MCU only app: Expected values in MCU ONLY mode: TP133: HIGH TP134: LOW MCU only app: ############################MCU ONLY -> ACTIVE MODE############################ MCU only app: PMIC STATE CHANGE: MCU ONLY -> ACTIVE... MCU only app: INT_TOP = 0x10 MCU only app: Write CONFIG_1 = 0xc0 MCU only app: Write FSM_NSLEEP_TRIGGERS = 0x3 MCU only app: Write CONFIG_1 = 0x0 MCU only app: Read FSM_NSLEEP_TRIGGERS = 0x3 MCU only app: PMIC STATE CHANGE: MCU ONLY -> ACTIVE...Done MCU only app: Disabling MAIN domain deep sleep isolation... MCU only app: Configure WKUPMCU2MAIN and MAIN2WKUPMCU Bridges... MCU only app: WKUPMCU2MAIN and MAIN2WKUPMCU Bridges configured successfully! MCU only app: Configuring Sciclient_board for MAIN domain MCU only app: Doing board init... MCU only app: Trying to access MAIN domain peripherals... MCU only app: Writing to DDR... MCU only app: Reading from DDR... MCU only app: Read value matches the value written for DDR! MCU only app: Writing to MSMC... MCU only app: Reading from MSMC... MCU only app: Read value matches the value written for MSMC! MCU only app: Reading MAIN MCAN0 Revision register... MCU only app: MAIN MCAN0 MCANSS_PID = 0x68e04901 MCU only app: #########################MCU ONLY -> ACTIVE MODE DONE########################## MCU only app: STATE INFO :: CURRENTLY IN ACTIVE MODE! MCU only app: LED LD5 should be ON MCU only app: Expected values in ACTIVE mode: TP133: HIGH TP134: HIGH MCU Only Task started at 244633002 usecs and finished at 267751003 usecs IPC_echo_test (core : mcu1_0) ..... IPC Driver Revision: 01.00.00.01 Waiting for Linux VDev ready... IPC Task started at 267829003 usecs and finished at 269912226 usecs Calling Sciclient_procBootRequestProcessor, ProcId 0x20... Loading BootImage Invalid magic number in Single image header Error parsing Main Domain appimage Error parsing A72 appimage #1 for HLOS boot BootImage completed, status = -1 Failure during image copy and parsing Sleeping for 30 seconds after each stage Boot App: Failure occurred in boot sequence MCU Boot Task started at 275019002 usecs and finished at 309394003 usecs Calling rpmsg_exit_responseTask Exiting rpmsg_vdevMonitorFxn! responder task should have exited MCU only app: Inside MCU ONLY task! MCU only app: Disabling MAXT_OUTRG_EN for TMPSENS1:4 in MAIN domain! MCU only app: STATE INFO :: CURRENTLY IN ACTIVE MODE! MCU only app: LED LD5 should be ON MCU only app: Sleeping for 10s, please measure TP133 and TP134! MCU only app: Expected values in ACTIVE mode: TP133: HIGH TP134: HIGH MCU only app: ############################ACTIVE -> MCU ONLY MODE############################ MCU only app: Issueing a SW reset to the MAIN domain... MCU only app: Enabling MAIN domain deep sleep isolation... MCU only app: PMIC STATE CHANGE: ACTIVE -> MCU ONLY... MCU only app: INT_TOP = 0x10 MCU only app: INT_STARTUP = 0x0 MCU only app: INT_GPIO = 0x0 MCU only app: INT_GPIO1_8 = 0x0 MCU only app: Read FSM_NSLEEP_TRIGGERS = 0x3 MCU only app: Write FSM_NSLEEP_TRIGGERS = 0x2 MCU only app: Read FSM_NSLEEP_TRIGGERS = 0x2 MCU only app: Write INT_STARTUP = 0x2 MCU only app: INT_TOP = 0x10 MCU only app: Write INT_STARTUP = 0xc8 MCU only app: INT_GPIO = 0x0 MCU only app: INT_TOP = 0x10 MCU only app: Write INT_GPIO = 0x2 MCU only app: Final Read INT_TOP = 0x10 MCU only app: Final Read FSM_NSLEEP_TRIGGERS = 0x2 MCU only app: PMIC STATE CHANGE: ACTIVE -> MCU ONLY...Done MCU only app: #########################ACTIVE -> MCU ONLY MODE DONE########################## MCU only app: STATE INFO :: NOW IN MCU ONLY MODE! MCU only app: LED LD5 should be OFF MCU only app: Sleeping for 10s, please measure TP133 and TP134! MCU only app: Expected values in MCU ONLY mode: TP133: HIGH TP134: LOW MCU only app: ############################MCU ONLY -> ACTIVE MODE############################ MCU only app: PMIC STATE CHANGE: MCU ONLY -> ACTIVE... MCU only app: INT_TOP = 0x10 MCU only app: Write CONFIG_1 = 0xc0 MCU only app: Write FSM_NSLEEP_TRIGGERS = 0x3 MCU only app: Write CONFIG_1 = 0x0 MCU only app: Read FSM_NSLEEP_TRIGGERS = 0x3 MCU only app: PMIC STATE CHANGE: MCU ONLY -> ACTIVE...Done MCU only app: Disabling MAIN domain deep sleep isolation... MCU only app: Configure WKUPMCU2MAIN and MAIN2WKUPMCU Bridges... MCU only app: WKUPMCU2MAIN and MAIN2WKUPMCU Bridges configured successfully! MCU only app: Configuring Sciclient_board for MAIN domain MCU only app: Doing board init... MCU only app: Trying to access MAIN domain peripherals... MCU only app: Writing to DDR... MCU only app: Reading from DDR... MCU only app: Read value matches the value written for DDR! MCU only app: Writing to MSMC... MCU only app: Reading from MSMC... MCU only app: Read value matches the value written for MSMC! MCU only app: Reading MAIN MCAN0 Revision register... MCU only app: MAIN MCAN0 MCANSS_PID = 0x68e04901 MCU only app: #########################MCU ONLY -> ACTIVE MODE DONE########################## MCU only app: STATE INFO :: CURRENTLY IN ACTIVE MODE! MCU only app: LED LD5 should be ON MCU only app: Expected values in ACTIVE mode: TP133: HIGH TP134: HIGH MCU Only Task started at 311540003 usecs and finished at 334658003 usecs