J6E ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading uenv.txt 219 bytes read in 3 ms (71.3 KiB/s) Loaded environment from uenv.txt Importing environment from mmc0 ... 5152960 bytes read in 265 ms (18.5 MiB/s) 96046 bytes read in 26 ms (3.5 MiB/s) Booting from mmc0 ... Kernel image @ 0x82000000 [ 0x000000 - 0x4ea0c0 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe5000, end 8ffff72d ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.63 (andy@andy-Veriton-M490) (gcc version 4.7.3 20130226 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.03-20130313 - Linaro GCC 2013.03) ) #14 SMP PREEMPT Mon Aug 1 13:59:46 CST 2016 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA722 [ 0.000000] Reserved memory: created CMA memory pool at 0x95800000, size 56 MiB [ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x99000000, size 64 MiB [ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x9d000000, size 32 MiB [ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x9f000000, size 8 MiB [ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [ 0.000000] cma: CMA: reserved 64 MiB at ab800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] DRA722 ES1.0 [ 0.000000] PERCPU: Embedded 8 pages/cpu @eaf4f000 s8640 r8192 d15936 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259088 [ 0.000000] Kernel command line: console=ttyO2,115200n8 elevator=noop root=/dev/mmcblk0p2 rw rootwait earlyprintk fixrtc omapdrm.num_crtc=2 consoleblank=0 cma=64M rootfstype=ext4 snd.slots_reserved=1,1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 792540K/1042432K available (6715K kernel code, 691K rwdata, 2664K rodata, 376K init, 267K bss, 249892K reserved, 268288K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc09310d4 (9381 kB) [ 0.000000] .init : 0xc0932000 - 0xc09901c0 ( 377 kB) [ 0.000000] .data : 0xc0992000 - 0xc0a3ef20 ( 692 kB) [ 0.000000] .bss : 0xc0a3ef2c - 0xc0a81bfc ( 268 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] GIC CPU mask not found - kernel will fail to boot. [ 0.000000] GIC CPU mask not found - kernel will fail to boot. [ 0.000000] OMAP clockevent source: timer1 at 31475 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000396] Architected cp15 timer(s) running at 5.90MHz (virt). [ 0.000432] sched_clock: 56 bits at 5MHz, resolution 169ns, wraps every 2911033065472ns [ 0.000439] Switching to timer-based delay loop [ 0.001392] Console: colour dummy device 80x30 [ 0.001410] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2' [ 0.001416] This ensures that you still see kernel messages. Please [ 0.001422] update your kernel commandline. [ 0.001437] Calibrating delay loop (skipped), value calculated using timer frequency.. 11.80 BogoMIPS (lpj=59016) [ 0.001449] pid_max: default: 32768 minimum: 301 [ 0.001542] Security Framework initialized [ 0.001581] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001591] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.023756] CPU: Testing write buffer coherency: ok [ 0.024026] /cpus/cpu@0 missing clock-frequency property [ 0.024041] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.024063] Setting up static identity map for 0x80694aa8 - 0x80694b18 [ 0.060502] Brought up 1 CPUs [ 0.060514] SMP: Total of 1 processors activated (11.80 BogoMIPS). [ 0.060522] CPU: All CPU(s) started in SVC mode. [ 0.060923] devtmpfs: initialized [ 0.061674] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.063368] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.076140] omap_hwmod: tptc0 using broken dt data from edma-controller [ 0.076647] omap_hwmod: tptc1 using broken dt data from edma-controller [ 0.242417] pinctrl core: initialized pinctrl subsystem [ 0.243258] regulator-dummy: no parameters [ 0.247502] NET: Registered protocol family 16 [ 0.249371] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.251795] cpuidle: using governor ladder [ 0.251807] cpuidle: using governor menu [ 0.296621] syscon 4a002000.tisysconcore: regmap [mem 0x4a002000-0x4a0026cf] registered [ 0.296976] syscon 4a002e00.tisyscon: regmap [mem 0x4a002e00-0x4a002e7b] registered [ 0.299975] OMAP GPIO hardware version 0.1 [ 0.306682] irq: no irq domain found for /ocp/pinmux@4a003400 ! [ 0.315120] platform 58820000.ipu: assigned reserved memory node ipu1_cma@9d000000 [ 0.315447] platform 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 [ 0.315765] platform 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [ 0.339636] No ATAGs? [ 0.339655] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.339664] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.342683] OMAP DMA hardware revision 0.0 [ 0.375333] bio: create slab at 0 [ 0.393079] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.399815] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.400762] evm_3v3_sd: 3300 mV [ 0.401120] evm_3v3_sw: 3300 mV [ 0.401455] aic_dvdd: 1800 mV [ 0.401542] aic_dvdd: supplied by evm_3v3_sw [ 0.401912] vmmcwl_fixed: 1800 mV [ 0.405834] vgaarb: loaded [ 0.406313] i2c-core: driver [palmas] using legacy suspend method [ 0.406322] i2c-core: driver [palmas] using legacy resume method [ 0.406940] SCSI subsystem initialized [ 0.408359] usbcore: registered new interface driver usbfs [ 0.408539] usbcore: registered new interface driver hub [ 0.408745] usbcore: registered new device driver usb [ 0.410948] palmas 0-0058: could not find pctldev for node /ocp/pinmux@4a003400/tps65917_pins_default, deferring probe [ 0.410967] i2c 0-0058: Driver palmas requests probe deferral [ 0.412205] pcf857x: probe of 0-0020 failed with error -121 [ 0.412975] pcf857x: probe of 0-0021 failed with error -121 [ 0.413008] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.411404] omap_i2c 48072000.i2c: controller timed out [ 1.431436] pcf857x: probe of 1-0026 failed with error -110 [ 1.433320] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz [ 1.433796] omap_i2c 48060000.i2c: bus 2 rev0.12 at 3400 kHz [ 2.431994] omap_i2c 4807a000.i2c: controller timed out [ 2.432026] pcf857x: probe of 3-0021 failed with error -110 [ 2.432055] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz [ 2.432380] media: Linux media interface: v0.10 [ 2.432544] Linux video capture interface: v2.00 [ 2.432800] pps_core: LinuxPPS API ver. 1 registered [ 2.432810] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.432940] PTP clock support registered [ 2.434595] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 2.434669] omap-mailbox: probe of 48842000.mailbox failed with error -22 [ 2.435657] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 2.435766] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 2.435875] omap-iommu 58882000.mmu: 58882000.mmu registered [ 2.435983] omap-iommu 55082000.mmu: 55082000.mmu registered [ 2.436927] Advanced Linux Sound Architecture Driver Initialized. [ 2.438392] Switched to clocksource arch_sys_counter [ 2.458060] NET: Registered protocol family 2 [ 2.458729] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 2.458794] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 2.458926] TCP: Hash tables configured (established 8192 bind 8192) [ 2.458972] TCP: reno registered [ 2.458986] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 2.459018] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 2.459204] NET: Registered protocol family 1 [ 2.459513] RPC: Registered named UNIX socket transport module. [ 2.459523] RPC: Registered udp transport module. [ 2.459530] RPC: Registered tcp transport module. [ 2.459537] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.460815] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 2.463690] futex hash table entries: 256 (order: 2, 16384 bytes) [ 2.577156] bounce pool size: 64 pages [ 2.577403] VFS: Disk quotas dquot_6.5.2 [ 2.577505] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.577980] NFS: Registering the id_resolver key type [ 2.578017] Key type id_resolver registered [ 2.578026] Key type id_legacy registered [ 2.578057] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 2.578191] msgmni has been set to 1471 [ 2.582622] alg: No test for stdrng (krng) [ 2.582827] NET: Registered protocol family 38 [ 2.582855] io scheduler noop registered (default) [ 2.582864] io scheduler deadline registered [ 2.582885] io scheduler cfq registered [ 2.585851] platform 4a084000.phy: Driver omap-usb2 requests probe deferral [ 2.585996] platform 4a085000.phy: Driver omap-usb2 requests probe deferral [ 2.588496] pinctrl-single 4a003400.pinmux: 281 pins at pa fc003400 size 1124 [ 2.588917] pinctrl-single 4a002e8c.pinmux: 1 pins at pa fc002e8c size 4 [ 2.623816] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00 [ 2.623831] pci_bus 0000:00: root bus resource [io 0x1000-0x10000] [ 2.623843] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 2.623854] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 2.624384] PCI: bus0: Fast back to back transfers disabled [ 2.624640] PCI: bus1: Fast back to back transfers enabled [ 2.624760] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 2.624776] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 2.624789] pci 0000:00:00.0: PCI bridge to [bus 01] [ 2.624808] pci 0000:00:00.0: PCI bridge to [bus 01] [ 2.627153] OMAP DSS rev 6.1 [ 2.632232] platform encoder@1: Driver dra7evm-tpd12s015 requests probe deferral [ 2.632957] connector-hdmi connector@1: failed to find video source [ 2.632974] platform connector@1: Driver connector-hdmi requests probe deferral [ 2.633966] pbias_mmc_omap5: 1800 <--> 3000 mV at 3000 mV [ 2.634822] abb_mpu: 1100 <--> 1210 mV [ 2.635193] abb_ivahd: 1060 <--> 1250 mV [ 2.635571] abb_dspeve: 1060 <--> 1250 mV [ 2.635941] abb_gpu: 1060 <--> 1280 mV [ 2.637137] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 2.641806] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 299, base_baud = 3000000) is a 8250 [ 2.642575] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 300, base_baud = 3000000) is a 8250 [ 2.643388] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 301, base_baud = 3000000) is a 8250 [ 3.702444] console [ttyS2] enabled [ 3.706743] 48066000.serial: ttyS4 at MMIO 0x48066000 (irq = 302, base_baud = 3000000) is a 8250 [ 3.716380] 48068000.serial: ttyS5 at MMIO 0x48068000 (irq = 303, base_baud = 3000000) is a 8250 [ 3.726040] 4ae2b000.serial: ttyS9 at MMIO 0x4ae2b000 (irq = 304, base_baud = 3000000) is a 8250 [ 3.736783] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ 3.744091] [drm] Initialized drm 1.1.0 20060810 [ 3.759680] brd: module loaded [ 3.768476] loop: module loaded [ 3.772040] (hci_tty): inside hci_tty_init [ 3.776538] (hci_tty): allocated 249, 0 [ 3.783462] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 3.790304] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 3.799060] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 3.809649] scsi0 : ahci_platform [ 3.813473] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 340 [ 3.822908] mtdoops: mtd device (mtddev=name/number) must be supplied [ 3.835962] usbcore: registered new interface driver asix [ 3.841613] usbcore: registered new interface driver ax88179_178a [ 3.847919] usbcore: registered new interface driver cdc_ether [ 3.854198] usbcore: registered new interface driver smsc95xx [ 3.860162] usbcore: registered new interface driver net1080 [ 3.866020] usbcore: registered new interface driver cdc_subset [ 3.872197] usbcore: registered new interface driver zaurus [ 3.877998] usbcore: registered new interface driver cdc_ncm [ 3.884562] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.891229] ehci-pci: EHCI PCI platform driver [ 3.895834] ehci-omap: OMAP-EHCI Host Controller driver [ 3.901607] usbcore: registered new interface driver cdc_wdm [ 3.907483] usbcore: registered new interface driver usb-storage [ 3.914733] mousedev: PS/2 mouse device common for all mice [ 3.922941] i2c-core: driver [rtc-ds1307] using legacy suspend method [ 3.929540] i2c-core: driver [rtc-ds1307] using legacy resume method [ 3.936612] omap_rtc 48838000.rtcss: rtc core: registered 48838000.rtcss as rtc0 [ 3.945039] i2c /dev entries driver [ 3.949891] tvp5158 1-0058: Camera sensor driver registered [ 3.955781] i2c 1-0037: Driver ov1063x requests probe deferral [ 3.962624] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin [ 3.968912] vip 48970000.vip: No explicit pinctrl resources data. [ 3.975978] vip 48970000.vip: loading firmware vpdma-1b8.bin [ 3.982505] DRA7xx Radio probe done [ 3.986532] Driver for 1-wire Dallas network protocol. [ 3.992073] vpe 489d0000.vpe: Device registered as /dev/video0 [ 3.998876] vip 48970000.vip: VPDMA firmware loaded [ 4.003875] vip1-s0: Using subdev tvp5158 1-0058 for capture [ 4.009895] coproc iva_coproc: probe [ 4.013592] Adding alias for supply vdd,iva_coproc -> vdd,4a0025cc.voltdm [ 4.020767] Adding alias for supply vbb,iva_coproc -> vbb,4a0025cc.voltdm [ 4.027607] omap_voltdm 4a0025cc.voltdm: Unable to get vdd regulator:-517 [ 4.034515] vip1-s0: vip Device registered as /dev/video1 [ 4.040020] vip1-s1: Port A enabled but no endpoints found [ 4.045356] vip1-s0: Port B enabled but no endpoints found[ 4.050939] coproc iva_coproc: of_pm_voltdm_notifier_register: Failed to get coproc regulator/voltdm: -517 [ 4.060672] vip1-s1: Port B enabled but no endpoints found [ 4.066089] coproc iva_coproc: coproc clock notifier not ready, retry [ 4.072841] coproc iva_coproc: coproc_probe result=-517 [ 4.078101] platform iva_coproc: Driver coproc requests probe deferral [ 4.084710] coproc dsp_coproc: probe [ 4.088436] Adding alias for supply vdd,dsp_coproc -> vdd,4a0025e0.voltdm [ 4.095255] Adding alias for supply vbb,dsp_coproc -> vbb,4a0025e0.voltdm [ 4.102122] omap_voltdm 4a0025e0.voltdm: Unable to get vdd regulator:-517 [ 4.108975] coproc dsp_coproc: of_pm_voltdm_notifier_register: Failed to get coproc regulator/voltdm: -517 [ 4.118684] coproc dsp_coproc: coproc clock notifier not ready, retry [ 4.125202] coproc dsp_coproc: coproc_probe result=-517 [ 4.130491] platform dsp_coproc: Driver coproc requests probe deferral [ 4.141683] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 4.168429] ata1: SATA link down (SStatus 0 SControl 300) [ 4.225584] mmc0: host does not support reading read-only switch. assuming write-enable. [ 4.236271] mmc0: new high speed SDHC card at address 1234 [ 4.242307] mmcblk0: mmc0:1234 SA04G 3.70 GiB [ 4.247966] mmcblk0: p1 p2 [ 4.269220] ledtrig-cpu: registered to indicate activity on CPUs [ 4.275565] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 4.294526] mmc1: BKOPS_EN bit is not set [ 4.299515] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 4.305911] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ 4.312312] alg: skcipher: setkey failed on test 5 for ecb-des-omap: flags=100 [ 4.320008] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-omap: flags=100 [ 4.328230] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-omap: flags=100 [ 4.336741] mmc1: new high speed DDR MMC card at address 0001 [ 4.344062] mmcblk1: mmc1:0001 R1J55A 7.28 GiB [ 4.350557] mmcblk1boot0: mmc1:0001 R1J55A partition 1 128 KiB [ 4.357566] mmcblk1boot1: mmc1:0001 R1J55A partition 2 128 KiB [ 4.364175] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 4.370206] omap-sham 4b101000.sham: initialization failed. [ 4.375830] omap-sham: probe of 4b101000.sham failed with error -22 [ 4.383111] mmcblk1: p1 p2 [ 4.386713] usbcore: registered new interface driver usbhid [ 4.392572] usbhid: USB HID core driver [ 4.398637] remoteproc0: 58820000.ipu is available [ 4.403539] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 4.412675] mmcblk1boot1: unknown partition table [ 4.418283] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 4.428941] remoteproc0: Direct firmware load failed with error -2 [ 4.435295] mmcblk1boot0: unknown partition table [ 4.440255] remoteproc1: 55020000.ipu is available [ 4.445154] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 4.454558] remoteproc0: Falling back to user helper [ 4.459947] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 4.471532] remoteproc1: Direct firmware load failed with error -2 [ 4.479957] remoteproc2: 40800000.dsp is available [ 4.484906] remoteproc1: Falling back to user helper [ 4.490066] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 4.499347] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 4.510765] remoteproc2: Direct firmware load failed with error -2 [ 4.517393] remoteproc2: Falling back to user helper [ 4.528690] platform bt_sco_card: Driver asoc-simple-card requests probe deferral [ 4.536984] asoc-simple-card asoc-simple-card.0: hdmi-hifi <-> 58040000.encoder mapping ok [ 4.547234] davinci-mcasp 48464000.mcasp: DAI is shared [ 4.553245] davinci-mcasp 48468000.mcasp: numevt will be ignored due to errata i868 [ 4.562177] davinci-mcasp 48474000.mcasp: DAI is shared [ 4.567473] davinci-mcasp 48474000.mcasp: numevt will be ignored due to errata i868 [ 4.575713] davinci-mcasp 48478000.mcasp: numevt will be ignored due to errata i868 [ 4.583895] davinci-mcasp 4847c000.mcasp: numevt will be ignored due to errata i868 [ 4.603144] dra7xx-jamr3-snd jamr3_sound: multicodec <-> 48474000.mcasp mapping ok [ 4.613465] oprofile: using timer interrupt. [ 4.617816] nf_conntrack version 0.5.0 (15967 buckets, 63868 max) [ 4.624508] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.630049] TCP: cubic registered [ 4.633377] Initializing XFRM netlink socket [ 4.637678] NET: Registered protocol family 17 [ 4.642253] NET: Registered protocol family 15 [ 4.646776] Bridge firewalling registered [ 4.650851] can: controller area network core (rev 20120528 abi 9) [ 4.657108] NET: Registered protocol family 29 [ 4.661611] can: raw protocol (rev 20120528) [ 4.665939] 8021q: 802.1Q VLAN Support v1.8 [ 4.670197] Key type dns_resolver registered [ 4.674487] NET: Registered protocol family 41 [ 4.679724] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm [ 4.686021] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm [ 4.692397] omap_voltdm 4a003b20.voltdm: Unable to get vdd regulator:-517 [ 4.699259] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517 [ 4.707995] cpu cpu0: cpu0 clock notifier not ready, retry [ 4.713547] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral [ 4.721250] Power Management for TI OMAP4+ devices. [ 4.726325] ThumbEE CPU extension supported. [ 4.730694] Registering SWP/SWPB emulation handler [ 4.735506] SmartReflex Class3 initialized [ 4.740736] vmmcwl_fixed: disabling [ 4.744242] aic_dvdd: disabling [ 4.747395] regulator-dummy: disabling [ 4.751517] dmm 4e000000.dmm: workaround for errata i878 in use [ 4.759762] dmm 4e000000.dmm: initialized all PAT entries [ 4.765671] platform omapdrm.0: Driver omapdrm requests probe deferral [ 4.774048] palmas 0-0058: Irq flag is 0x00000000 [ 5.063592] random: nonblocking pool is initialized [ 64.489017] remoteproc0: failed to load dra7-ipu1-fw.xem4 [ 64.649097] remoteproc1: failed to load dra7-ipu2-fw.xem4 [ 64.654900] remoteproc2: failed to load dra7-dsp1-fw.xe66 [ 72.296194] irq 429: nobody cared (try booting with the "irqpoll" option) [ 72.303020] CPU: 0 PID: 1097 Comm: irq/429-tps6591 Not tainted 3.14.63 #14 [ 72.309923] Backtrace: [ 72.312401] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [ 72.320000] r6:20000193 r5:ffffffff r4:00000000 r3:00000000 [ 72.325724] [] (show_stack) from [] (dump_stack+0x80/0xa0) [ 72.332985] [] (dump_stack) from [] (__report_bad_irq+0x28/0xc8) [ 72.340758] r7:00002000 r6:000001ad r5:00000000 r4:ea2aa980 [ 72.346478] [] (__report_bad_irq) from [] (note_interrupt+0x254/0x2b4) [ 72.354774] r6:000001ad r5:00000000 r4:ea2aa980 r3:00000000 [ 72.360496] [] (note_interrupt) from [] (handle_irq_event_percpu+0xb0/0x1a0) [ 72.369316] r10:ea2aa980 r9:c0a3ea42 r8:000001ad r7:00002000 r6:00000002 r5:00000002 [ 72.377219] r4:00000000 r3:00000000 [ 72.380828] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x44/0x64) [ 72.389736] r10:ea5e2ac0 r9:00000001 r8:00000000 r7:000001ad r6:ea5e2ac0 r5:ea2aa9dc [ 72.397639] r4:ea2aa980 [ 72.400194] [] (handle_irq_event) from [] (handle_fasteoi_irq+0xa0/0x160) [ 72.408752] r6:ea608000 r5:ea2aa9dc r4:ea2aa980 r3:00020000 [ 72.414473] [] (handle_fasteoi_irq) from [] (generic_handle_irq+0x28/0x38) [ 72.423118] r5:c098ef78 r4:000001ad [ 72.426728] [] (generic_handle_irq) from [] (handle_IRQ+0x54/0xb8) [ 72.434676] r4:c099ac74 r3:000001b1 [ 72.438284] [] (handle_IRQ) from [] (gic_handle_irq+0x30/0x64) [ 72.445882] r8:ea2aa980 r7:fa212000 r6:ea609e88 r5:c099adf8 r4:fa21200c r3:000000c0 [ 72.453701] [] (gic_handle_irq) from [] (__irq_svc+0x40/0x74) [ 72.461214] Exception stack(0xea609e88 to 0xea609ed0) [ 72.466287] 9e80: ea2aa9dc a0000193 000093e8 00000000 ea2aa980 ea5e2ac0 [ 72.474499] 9ea0: ea2aa9dc 00000000 ea2aa980 00000001 ea5e2ac0 ea609edc ea609ee0 ea609ed0 [ 72.482710] 9ec0: c0084080 c068faa0 20000113 ffffffff [ 72.487778] r7:ea609ebc r6:ffffffff r5:20000113 r4:c068faa0 [ 72.493498] [] (_raw_spin_unlock_irq) from [] (irq_finalize_oneshot+0x60/0xe8) [ 72.502499] [] (irq_finalize_oneshot) from [] (irq_thread_fn+0x34/0x3c) [ 72.510882] r7:00000001 r6:ea2aa980 r5:00000000 r4:ea5e2ac0 [ 72.516601] [] (irq_thread_fn) from [] (irq_thread+0x128/0x188) [ 72.524288] r6:00000000 r5:ea5e2ae0 r4:ea608000 r3:c00841c4 [ 72.530008] [] (irq_thread) from [] (kthread+0xcc/0xe8) [ 72.536996] r10:00000000 r9:00000000 r8:00000000 r7:c0084254 r6:ea5e2ac0 r5:ea5e2a80 [ 72.544897] r4:00000000 [ 72.547450] [] (kthread) from [] (ret_from_fork+0x14/0x34) [ 72.554700] r7:00000000 r6:00000000 r5:c0062588 r4:ea5e2a80 [ 72.560411] handlers: [ 72.562693] [] irq_default_primary_handler threaded [] regmap_irq_thread [ 72.571184] Disabling IRQ #429 [ 72.575336] palmas 0-0058: Muxing GPIO 51, PWM 0, LED 2 [ 72.580745] prom_parse: Bad cell count for /ocp/i2c@48070000/tps65917@58 [ 72.589312] smps1: 850 <--> 1500 mV at 980 mV [ 72.595131] smps2: 850 <--> 1500 mV at 1010 mV [ 72.601060] smps3: 850 <--> 1500 mV at 960 mV [ 72.606860] smps4: 1800 mV [ 72.611038] smps5: 1350 mV [ 72.615213] ldo1: 1800 <--> 3300 mV at 3000 mV [ 72.620710] ldo2: 1800 <--> 3300 mV [ 72.625920] ldo3: 1800 mV [ 72.630303] ldo4: 3300 mV [ 72.634633] ldo5: 1800 mV [ 72.638038] REGEN1: no parameters [ 72.641717] REGEN2: no parameters [ 72.645295] REGEN3: no parameters [ 72.648881] prom_parse: Bad cell count for /ocp/i2c@48070000/tps65917@58 [ 72.656046] palmas_pwrbutton 48070000.i2c:tps65917@58:tps65917_power_button: h/w controlled shutdown duration=6 seconds [ 72.668713] input: palmas_pwron as /devices/44000000.ocp/48070000.i2c/i2c-0/0-0058/48070000.i2c:tps65917@58:tps65917_power_button/input/input0 [ 72.682169] omap-usb2 4a084000.phy: Unbalanced pm_runtime_enable! [ 72.688886] omap-usb2 4a085000.phy: Unbalanced pm_runtime_enable! [ 72.696235] i2c 1-0037: Driver ov1063x requests probe deferral [ 72.702363] coproc iva_coproc: probe [ 72.706054] Adding alias for supply vdd,iva_coproc -> vdd,4a0025cc.voltdm [ 72.712924] Adding alias for supply vbb,iva_coproc -> vbb,4a0025cc.voltdm [ 72.721247] coproc iva_coproc: coproc_probe result=0 [ 72.726436] coproc dsp_coproc: probe [ 72.730153] Adding alias for supply vdd,dsp_coproc -> vdd,4a0025e0.voltdm [ 72.736971] Adding alias for supply vbb,dsp_coproc -> vbb,4a0025e0.voltdm [ 72.744950] coproc dsp_coproc: coproc_probe result=0 [ 72.751093] asoc-simple-card bt_sco_card: bt-sco-pcm <-> 48478000.mcasp mapping ok [ 72.760200] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm [ 72.766497] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm [ 72.790130] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 72.796771] [drm] No driver support for vblank timestamp query. [ 72.803943] omapdss error: HDMI I2C Master Error [ 72.811866] [drm] Enabling DMM ywrap scrolling [ 72.832347] Console: switching to colour frame buffer device 128x48 [ 72.842510] omapdrm omapdrm.0: fb0: omapdrm frame buffer device [ 72.848474] omapdrm omapdrm.0: registered panic notifier [ 72.853813] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 [ 72.859913] i2c 1-0037: Driver ov1063x requests probe deferral [ 72.866703] omap_rtc 48838000.rtcss: setting system clock to 2000-01-01 00:01:10 UTC (946684870) [ 72.875597] sr_init: No PMIC hook to init smartreflex [ 72.880935] sr_init: platform driver register failed for SR [ 72.895666] ALSA device list: [ 72.898755] #2: HDMI 58040000.encoder [ 72.902604] #3: DRA7xx-JAMR3 [ 72.905666] #4: DRA7xx-WiLink [ 73.359277] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 73.367430] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 73.383756] devtmpfs: mounted [ 73.386967] Freeing unused kernel memory: 376K (c0932000 - c0990000) INIT: version 2.88 booting Starting udev [ 73.901409] udevd[1161]: starting version 182 [ 74.531489] i2c 1-0037: Driver ov1063x requests probe deferral [ 74.611874] i2c 1-0037: Driver ov1063x requests probe deferral [ 74.638974] tvp5158 1-0058: Currently only D1 resolution is supported udevd[1297]: failed to execute '/etc/udev/scripts/mount.sh' '/etc/udev/scripts/mount.sh': No such file or directory udevd[1298]: failed to execute '/etc/udev/scripts/mount.sh' '/etc/udev/scripts/mount.sh': No such file or directory udevd[1312]: failed to execute '/etc/udev/scripts/mount.sh' '/etc/udev/scripts/mount.sh': No such file or directory udevd[1314]: failed to execute '/etc/udev/scripts/mount.sh' '/etc/udev/scripts/mount.sh': No such file or directory [ 74.800686] CAN device driver interface [ 74.929429] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=351) [ 74.973448] i2c 1-0037: Driver ov1063x requests probe deferral [ 75.105267] i2c 1-0037: Driver ov1063x requests probe deferral [ 75.696751] i2c 1-0037: Driver ov1063x requests probe deferral [ 76.103207] i2c 1-0037: Driver ov1063x requests probe deferral [ 76.191328] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 76.197655] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 76.205824] xhci-hcd xhci-hcd.0.auto: irq 434, io mem 0x48890000 [ 76.212025] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 76.218868] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 76.226119] usb usb1: Product: xHCI Host Controller [ 76.231027] usb usb1: Manufacturer: Linux 3.14.63 xhci-hcd [ 76.236531] usb usb1: SerialNumber: xhci-hcd.0.auto [ 76.242016] hub 1-0:1.0: USB hub found [ 76.245801] hub 1-0:1.0: 1 port detected [ 76.249990] i2c 1-0037: Driver ov1063x requests probe deferral [ 76.255997] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 76.261613] i2c 1-0037: Driver ov1063x requests probe deferral [ 76.267707] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 76.275594] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 76.282423] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 76.289708] usb usb2: Product: xHCI Host Controller [ 76.294603] usb usb2: Manufacturer: Linux 3.14.63 xhci-hcd [ 76.300118] usb usb2: SerialNumber: xhci-hcd.0.auto [ 76.305555] hub 2-0:1.0: USB hub found [ 76.309353] hub 2-0:1.0: 1 port detected [ 76.313481] i2c 1-0037: Driver ov1063x requests probe deferral [ 76.319607] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 76.325293] i2c 1-0037: Driver ov1063x requests probe deferral [ 76.331309] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 76.339283] xhci-hcd xhci-hcd.1.auto: irq 435, io mem 0x488d0000 [ 76.345428] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 76.352342] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 76.359604] usb usb3: Product: xHCI Host Controller [ 76.364498] usb usb3: Manufacturer: Linux 3.14.63 xhci-hcd [ 76.370056] usb usb3: SerialNumber: xhci-hcd.1.auto [ 76.375463] hub 3-0:1.0: USB hub found [ 76.379262] hub 3-0:1.0: 1 port detected [ 76.383383] i2c 1-0037: Driver ov1063x requests probe deferral [ 76.389392] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 76.395054] i2c 1-0037: Driver ov1063x requests probe deferral [ 76.401054] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 76.409019] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 76.415833] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 76.423093] usb usb4: Product: xHCI Host Controller [ 76.427987] usb usb4: Manufacturer: Linux 3.14.63 xhci-hcd [ 76.433500] usb usb4: SerialNumber: xhci-hcd.1.auto [ 76.438912] hub 4-0:1.0: USB hub found [ 76.442696] hub 4-0:1.0: 1 port detected [ 76.446805] i2c 1-0037: Driver ov1063x requests probe deferral [ 76.477958] i2c 1-0037: Driver ov1063x requests probe deferral [ 77.389818] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Starting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No such file or directory bootlogd. ALSA: Restoring mixer settings... No state is present for card H58040000encode Found hardware: "HDMI_58040000_e" "" "" "" "" Hardware is initialized using a generic method No state is present for card H58040000encode No state is present for card DRA7xxJAMR3 Found hardware: "DRA7xx-JAMR3" "" "" "" "" Hardware is initialized using a generic method No state is present for card DRA7xxJAMR3 No state is present for card DRA7xxWiLink Found hardware: "DRA7xx-WiLink" "" "" "" "" Hardware is initialized using a generic method No state is present for card DRA7xxWiLink Thu Sep 3 18:41:00 UTC 2015 INIT: Entering runlevel: 5 Configuring network interfaces... ifconfig: SIOCGIFFLAGS: No such device done. Starting system message bus: dbus. UIM SYSFS Node Not Found Starting telnet daemon. Starting tiipclad daemon GateMP support enabled on host Opened log file: lad.txt numProcessors = 5 id = 0 baseId = 0 Spawned daemon: /usr/bin/lad_dra7xx . Starting rpcbind daemon...rpcbind: cannot create socket for udp6 rpcbind: cannot create socket for tcp6 done. creating NFS state directory: done starting statd: done NFS daemon support not enabled in kernel Starting syslogd/klogd: done Starting thttpd. Enabling thermal zones... Stopping Bootlog daemon: bootlogd. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dra7xx-evm /dev/ttyO2 Arago 2013.10 dra7xx-evm /dev/ttyO2 dra7xx-evm login: root root@dra7xx-evm:~# modetest trying to load module i915...failed. trying to load module radeon...failed. trying to load module nouveau...failed. [ 87.872857] omapdss error: HDMI I2C Master Error trying to load module vmwgfx...failed. trying to load module omapdrm...success. Encoders: id crtc type possible crtcs possible clones 3 10 TMDS 0x00000001 0x00000000 Connectors: id encoder status type size (mm) modes encoders 4 3 connected HDMI-A 0x0 5 3 modes: name refresh (Hz) hdisp hss hse htot vdisp vss vse vtot) 1024x768 60 1024 1048 1184 1344 768 771 777 806 flags: nhsync, nvsync; type: driver 800x600 60 800 840 968 1056 600 601 605 628 flags: phsync, pvsync; type: driver 800x600 56 800 824 896 1024 600 601 603 625 flags: phsync, pvsync; type: driver 848x480 60 848 864 976 1088 480 486 494 517 flags: phsync, pvsync; type: driver 640x480 60 640 656 752 800 480 489 492 525 flags: nhsync, nvsync; type: driver props: 1 EDID: flags: immutable blob blobs: value: 2 DPMS: flags: enum enums: On=0 Standby=1 Suspend=2 Off=3 value: 0 CRTCs: id fb pos size 10 25 (0,0) (1024x768) 1024x768 60 1024 1048 1184 1344 768 771 777 806 flags: nhsync, nvsync; type: driver props: 11 trans-key-mode: flags: enum enums: disable=0 gfx-dst=1 vid-src=2 value: 0 12 trans-key: flags: range values: 0 16777215 value: 0 13 background: flags: range values: 0 16777215 value: 0 14 alpha_blender: flags: enum enums: disable=0 enable=1 value: 0 6 rotation: flags: bitmask values: rotate-0=0x1 rotate-90=0x2 rotate-180=0x4 rotate-270=0x8 reflect-x=0x10 reflect-y=0x20 value: 0 7 zorder: flags: range values: 0 3 value: 0 8 global_alpha: flags: range values: 0 255 value: 0 9 pre_mult_alpha: flags: enum enums: disable=0 enable=1 value: 0 16 0 (0,0) (0x0) 0 0 0 0 0 0 0 0 0 flags: ; type: props: 11 trans-key-mode: flags: enum enums: disable=0 gfx-dst=1 vid-src=2 value: 0 12 trans-key: flags: range values: 0 16777215 value: 0 13 background: flags: range values: 0 16777215 value: 0 14 alpha_blender: flags: enum enums: disable=0 enable=1 value: 0 6 rotation: flags: bitmask values: rotate-0=0x1 rotate-90=0x2 rotate-180=0x4 rotate-270=0x8 reflect-x=0x10 reflect-y=0x20 value: 0 7 zorder: flags: range values: 0 3 value: 0 8 global_alpha: flags: range values: 0 255 value: 0 9 pre_mult_alpha: flags: enum enums: disable=0 enable=1 value: 0 Planes: id crtc fb CRTC x,y x,y gamma size 17 0 0 0,0 0,0 0 formats: RG16 RX12 XR12 RA12 AR12 XR15 AR15 RG24 RX24 XR24 RA24 AR24 NV12 YUYV UYVY props: 6 rotation: flags: bitmask values: rotate-0=0x1 rotate-90=0x2 rotate-180=0x4 rotate-270=0x8 reflect-x=0x10 reflect-y=0x20 value: 0 7 zorder: flags: range values: 0 3 value: 0 8 global_alpha: flags: range values: 0 255 value: 0 9 pre_mult_alpha: flags: enum enums: disable=0 enable=1 value: 0 18 0 0 0,0 0,0 0 formats: RG16 RX12 XR12 RA12 AR12 XR15 AR15 RG24 RX24 XR24 RA24 AR24 NV12 YUYV UYVY props: 6 rotation: flags: bitmask values: rotate-0=0x1 rotate-90=0x2 rotate-180=0x4 rotate-270=0x8 reflect-x=0x10 reflect-y=0x20 value: 0 7 zorder: flags: range values: 0 3 value: 0 8 global_alpha: flags: range values: 0 255 value: 0 9 pre_mult_alpha: flags: enum enums: disable=0 enable=1 value: 0 Frame buffers: id size pitch root@dra7xx-evm:~#