U-Boot SPL 2017.01-g9fd60700db (Jun 28 2017 - 19:55:57) DRA752-GP ES2.0 Trying to boot from MMC1 reading uboot.env ** Unable to read "uboot.env" from mmc0:1 ** Using default environment reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2017.01-g9fd60700db (Jun 28 2017 - 19:55:57 -0400) CPU : DRA752-GP ES2.0 Model: TI AM572x EVM Rev A3 Board: AM572x EVM REV A.3A DRAM: 2 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 reading uboot.env ** Unable to read "uboot.env" from mmc0:1 ** Using default environment SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: not set. Validating first E-fuse MAC cpsw Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 574 bytes read in 5 ms (111.3 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 3725624 bytes read in 269 ms (13.2 MiB/s) 103304 bytes read in 80 ms (1.2 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe3000, end 8ffff387 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.28-geed43d1050 (gtbldadm@ubuntu-16) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #2 SMP PREEMPT Wed Jun 28 18:16:59 EDT 2017 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt:Machine model: TI AM572x EVM Rev A3 [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB [ 0.000000] OF: reserved mem: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009f000000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x00000000fe400000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x00000000ffd00000 to fe600000 for dram barrier [ 0.000000] DRA752 ES2.0 [ 0.000000] percpu: Embedded 13 pages/cpu @eed34000 s22092 r8192 d22964 u53248 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 472640 [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=PARTUUID=50e41a45-02 rw rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1675680K/1897472K available (8192K kernel code, 314K rwdata, 2492K rodata, 2048K init, 296K bss, 33376K reserved, 188416K cma-reserved, 1283072K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0a00000 (10208 kB) [ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB) [ 0.000000] .data : 0xc1000000 - 0xc104e860 ( 315 kB) [ 0.000000] .bss : 0xc1050000 - 0xc109a130 ( 297 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000016] Switching to timer-based delay loop, resolution 162ns [ 0.000316] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000324] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000737] Console: colour dummy device 80x30 [ 0.000755] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2' [ 0.000762] This ensures that you still see kernel messages. Please [ 0.000768] update your kernel commandline. [ 0.000785] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000799] pid_max: default: 32768 minimum: 301 [ 0.000898] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000909] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001516] CPU: Testing write buffer coherency: ok [ 0.001726] /cpus/cpu@0 missing clock-frequency property [ 0.001743] /cpus/cpu@1 missing clock-frequency property [ 0.001754] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001771] Setting up static identity map for 0x80200000 - 0x80200060 [ 0.080070] EFI services will not be available. [ 0.170319] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.170406] Brought up 2 CPUs [ 0.170420] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.170427] CPU: All CPU(s) started in HYP mode. [ 0.170433] CPU: Virtualization extensions available. [ 0.170941] devtmpfs: initialized [ 0.198023] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.198257] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.198273] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.201638] pinctrl core: initialized pinctrl subsystem [ 0.202433] NET: Registered protocol family 16 [ 0.203285] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.204232] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.313919] omap_hwmod: dcan1: _wait_target_disable failed [ 0.440369] cpuidle: using governor ladder [ 0.470395] cpuidle: using governor menu [ 0.480105] OMAP GPIO hardware version 0.1 [ 0.494609] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.521054] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.521065] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.521417] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.521427] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.521956] OMAP DMA hardware revision 0.0 [ 0.571628] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.572921] edma 43300000.edma: memcpy is disabled [ 0.577699] edma 43300000.edma: TI EDMA DMA engine driver [ 0.582136] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.582304] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.582452] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.582601] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.582857] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.583030] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.585656] palmas 0-0058: Irq flag is 0x00000008 [ 0.612474] palmas 0-0058: Muxing GPIO 2d, PWM 0, LED 0 [ 0.616240] vtt_fixed: supplied by smps3 [ 0.662110] random: fast init done [ 0.692396] vdd_3v3: supplied by regen1 [ 0.692617] aic_dvdd_fixed: supplied by vdd_3v3 [ 0.695786] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.696280] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 0.696849] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 0.697039] media: Linux media interface: v0.10 [ 0.697085] Linux video capture interface: v2.00 [ 0.697120] pps_core: LinuxPPS API ver. 1 registered [ 0.697128] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.697149] PTP clock support registered [ 0.697187] EDAC MC: Ver: 3.0.0 [ 0.697878] omap-mailbox 4883c000.mailbox: omap mailbox rev 0x400 [ 0.698177] omap-mailbox 4883e000.mailbox: omap mailbox rev 0x400 [ 0.698460] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.698741] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.699079] Advanced Linux Sound Architecture Driver Initialized. [ 0.699892] clocksource: Switched to clocksource arch_sys_counter [ 0.710610] NET: Registered protocol family 2 [ 0.711108] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.711172] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.711297] TCP: Hash tables configured (established 8192 bind 8192) [ 0.711344] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.711375] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.711505] NET: Registered protocol family 1 [ 0.711869] RPC: Registered named UNIX socket transport module. [ 0.711878] RPC: Registered udp transport module. [ 0.711885] RPC: Registered tcp transport module. [ 0.711892] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.712808] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.715702] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 0.723247] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.723951] NFS: Registering the id_resolver key type [ 0.723974] Key type id_resolver registered [ 0.723981] Key type id_legacy registered [ 0.724023] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.725185] bounce: pool size: 64 pages [ 0.725329] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.725339] io scheduler noop registered [ 0.725347] io scheduler deadline registered [ 0.725473] io scheduler cfq registered (default) [ 0.729843] pinctrl-single 4a003400.pinmux: please update dts to use #pinctrl-cells = <1> [ 0.730381] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.733770] OF: PCI: host bridge /ocp/axi@0/pcie@51000000 ranges: [ 0.733782] OF: PCI: No bus range found for /ocp/axi@0/pcie@51000000, using [bus 00-ff] [ 0.733816] OF: PCI: IO 0x20003000..0x20012fff -> 0x00000000 [ 0.733836] OF: PCI: MEM 0x20013000..0x2fffffff -> 0x20013000 [ 1.735235] dra7-pcie 51000000.pcie: phy link never came up [ 1.735404] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00 [ 1.735418] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.735429] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.735439] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 1.735814] PCI: bus0: Fast back to back transfers disabled [ 1.735932] PCI: bus1: Fast back to back transfers enabled [ 1.736050] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 1.736066] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 1.736080] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.736298] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 1.737330] backlight supply power not found, using dummy regulator [ 1.799529] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 1.802908] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 301, base_baud = 3000000) is a 8250 [ 2.771538] console [ttyS2] enabled [ 2.775879] 48422000.serial: ttyS7 at MMIO 0x48422000 (irq = 302, base_baud = 3000000) is a 8250 [ 2.786622] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ 2.793401] [drm] Initialized [ 2.798286] OMAP DSS rev 6.1 [ 2.801661] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 2.809998] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops) [ 2.820064] display supply vcc not found, using dummy regulator [ 2.997223] brd: module loaded [ 3.015517] loop: module loaded [ 3.019235] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 3.028940] libphy: Fixed MDIO Bus: probed [ 3.089920] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 3.096045] libphy: 48485000.mdio: probed [ 3.104430] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver Micrel KSZ9031 Gigabit PHY [ 3.114170] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver Micrel KSZ9031 Gigabit PHY [ 3.124395] cpsw 48484000.ethernet: Detected MACID = fc:0f:4b:7a:4f:fc [ 3.131081] cpsw 48484000.ethernet: cpts: overflow check period 500 (jiffies) [ 3.139346] cpsw 48484000.ethernet: cpsw: Detected MACID = fc:0f:4b:7a:4f:fd [ 3.147751] mousedev: PS/2 mouse device common for all mice [ 3.153688] i2c /dev entries driver [ 3.159942] gpio-fan gpio_fan: GPIO fan initialized [ 3.166169] tmp102 0-0048: initialized [ 3.175062] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.250235] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 3.256615] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 3.400799] ledtrig-cpu: registered to indicate activity on CPUs [ 3.411506] NET: Registered protocol family 10 [ 3.426628] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.432975] NET: Registered protocol family 17 [ 3.437582] Key type dns_resolver registered [ 3.441975] omap_voltage_late_init: Voltage driver support not added [ 3.448418] Power Management for TI OMAP4+ devices. [ 3.453525] Registering SWP/SWPB emulation handler [ 3.467312] dmm 4e000000.dmm: initialized all PAT entries [ 3.500953] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.507594] [drm] No driver support for vblank timestamp query. [ 3.515389] [drm] Enabling DMM ywrap scrolling [ 3.553436] mmc1: new DDR MMC card at address 0001 [ 3.553803] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 3.553967] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 3.554132] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 3.554725] mmcblk1: p1 p2 p3 [ 3.557676] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.588551] Console: switching to colour frame buffer device 100x30 [ 3.592375] mmc0: new ultra high speed SDR104 SDXC card at address 59b4 [ 3.605836] mmcblk0: mmc0:59b4 USDU1 59.0 GiB [ 3.612670] mmcblk0: p1 p2 [ 3.643233] omapdrm omapdrm.0: fb0: omapdrm frame buffer device [ 3.692098] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 3.699039] hctosys: unable to open rtc device (rtc0) [ 3.704685] aic_dvdd_fixed: disabling [ 3.708364] vmmcwl_fixed: disabling [ 3.712045] ldousb: disabling [ 3.715279] ALSA device list: [ 3.718257] No soundcards found. [ 3.750887] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.759031] VFS: Mounted root (ext4 filesystem) on device 179:50. [ 3.769584] devtmpfs: mounted [ 3.773677] Freeing unused kernel memory: 2048K (c0e00000 - c1000000) [ 3.937509] systemd[1]: System time before build time, advancing clock. [ 3.978184] systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 3.996621] systemd[1]: Detected architecture arm. Welcome to Arago 2017.05! [ 4.030839] systemd[1]: Set hostname to . [ 4.322593] systemd[1]: sysinit.target: Found ordering cycle on sysinit.target/start [ 4.330420] systemd[1]: sysinit.target: Found dependency on alignment.service/start [ 4.338116] systemd[1]: sysinit.target: Found dependency on sysinit.target/start [ 4.345584] systemd[1]: sysinit.target: Breaking ordering cycle by deleting job alignment.service/start [ 4.355085] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with sysinit.target/start [ SKIP ] Ordering cycle found, skipping alignment.service [ 4.402131] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 4.431268] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ OK ] Created slice system-getty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Created slice User and Session Slice. [ OK ] Reached target Swap. [ OK ] Listening on udev Kernel Socket. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Reached target Remote File Systems. [ OK ] Listening on Network Service Netlink Socket. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Listening on udev Control Socket. [ OK ] Reached target Slices. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Paths. [ OK ] Listening on Journal Socket. Mounting Temporary Directory... Starting Setup Virtual Console... Starting Remount Root and Kernel File Systems... [ 4.992811] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Starting Journal Service... Starting Create Static Device Nodes in /dev... Starting Load Kernel Modules... [ 5.113032] cmemk: loading out-of-tree module taints kernel. Mounting POSIX Message Queue File System... [ 5.121174] CMEMK module: reference Linux version 4.9.28 [ 5.129390] allocated heap buffer 0x40500000 of size 0x100000 [ 5.135320] cmemk initialized Mounting Debug File System... [ 5.149557] cryptodev: driver 1.8 loaded. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Debug File System. [ OK ] Mounted Temporary Directory. [ OK ] Started Journal Service. [ OK ] Started Setup Virtual Console. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Load Kernel Modules. Starting Apply Kernel Variables... Mounting Configuration File System... Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /var/volatile... Mounting /media/ram... Starting udev Coldplug all Devices... Starting Flush Journal to Persistent Storage... [ OK ] Mounted Configuration File System. [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Apply Kernel Variables. [ 5.850536] systemd-journald[120]: Received request to flush runtime journal from PID 1 [ OK ] Reached target Local File Systems. Starting Load/Save Random Seed... [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Load/Save Random Seed. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. Starting Synchronize System and HW clocks... [ 6.240474] omap-rproc 58820000.ipu: assigned reserved memory node ipu1_cma@9d000000 [ 6.248350] remoteproc remoteproc0: 58820000.ipu is available [[ 6.294167] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 [ 6.309003] remoteproc remoteproc1: 55020000.ipu is available FAILED] Failed to start Synchronize System and HW clocks. [ 6.317936] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [ 6.330612] remoteproc remoteproc2: 40800000.dsp is available [ 6.337646] omap-rproc 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000 [ 6.348655] remoteproc remoteproc3: 41000000.dsp is available See 'systemctl status sync-clocks.service' for details. [ OK ] Started udev Coldplug all Devices. [ OK ] Found device /dev/ttyS2. [ OK ] Reached target System Initialization. [ 6.514696] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 6.542436] remoteproc remoteproc1: powering up 55020000.ipu [ 6.552031] remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3743164 [ 6.552097] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ 6.560608] rtc-ds1307 2-006f: SET TIME! [ 6.562740] remoteproc remoteproc0: powering up 58820000.ipu [ 6.562749] remoteproc remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 4872056 [ 6.562840] omap-iommu 58882000.mmu: 58882000.mmu: version 2.1 [ 6.563067] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 6.580726] rtc-ds1307 2-006f: 64 bytes nvram [ 6.607176] virtio_rpmsg_bus virtio0: rpmsg host is online [ 6.607201] remoteproc remoteproc0: registered virtio0 (type 7) [ 6.607206] remoteproc remoteproc0: remote processor 58820000.ipu is now up [ 6.608539] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x32 [ 6.608699] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x33 [ 6.608864] virtio_rpmsg_bus virtio0: creating channel rpmsg-omx addr 0x3c [ 6.608988] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x65 [ 6.757603] virtio_rpmsg_bus virtio1: rpmsg host is online [ 6.757620] remoteproc remoteproc1: registered virtio1 (type 7) [ 6.757624] remoteproc remoteproc1: remote processor 55020000.ipu is now up [ 6.761164] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x65 [ 6.761599] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x66 [ 6.795454] input: pixcir_tangoc as /devices/platform/44000000.ocp/4807c000.i2c/i2c-4/4-005c/input/input1 [ 6.802301] mt9t11x 4-003c: input-clock-freq: 32000000 [ 6.802307] mt9t11x 4-003c: pixel-clock-freq: 96000000 [ 6.835336] mt9t11x 4-003c: Product ID error ffffff87 [ OK ] Listening on dropbear.socket. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ 6.914186] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin [ 6.921100] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ 6.934748] omap-des 480a5000.des: will run requests pump with realtime priority [ OK ] Reached target Sockets. [ 6.950508] vpe 489d0000.vpe: Device registered as /dev/video0 [ OK ] Reached target Basic System. [ 6.983442] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc2 [ OK ] Started System Logging Service. [ OK ] Started D-Bus System Message Bus. [ 7.178797] SCSI subsystem initialized [ 7.208741] vip 48990000.vip: loading firmware vpdma-1b8.bin [ 7.227882] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 7.239003] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 7.244857] vip 48990000.vip: VPDMA firmware loaded [ 7.299795] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 [ 7.308761] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 7.322581] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 7.336171] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 7.360084] omap-hdmi-audio omap-hdmi-audio.0.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok [ 7.379994] scsi host0: ahci [ 7.383748] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 346 [ 7.615693] remoteproc remoteproc2: powering up 40800000.dsp [ 7.622134] remoteproc remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 21891524 [ 7.639581] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 7.645467] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 7.651372] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 7.715262] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 7.726592] asoc-simple-card sound0: tlv320aic3x-hifi <-> 48468000.mcasp mapping ok [ 7.731361] ata1: SATA link down (SStatus 0 SControl 300) [ 7.732182] omap-aes 4b500000.aes: will run requests pump with realtime priority [ 7.788588] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 7.799986] omap-aes 4b700000.aes: will run requests pump with realtime priority [ 7.801845] virtio_rpmsg_bus virtio2: rpmsg host is online [ 7.801863] remoteproc remoteproc2: registered virtio2 (type 7) [ 7.801867] remoteproc remoteproc2: remote processor 40800000.dsp is now up [ 7.803384] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x3d [ 7.822133] remoteproc remoteproc3: powering up 41000000.dsp [ 7.822141] remoteproc remoteproc3: Booting fw image dra7-dsp2-fw.xe66, size 21891524 [ 7.828822] omap_hwmod: mmu0_dsp2: _wait_target_disable failed [ 7.828856] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0 [ 7.828902] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0 [ 7.885534] virtio_rpmsg_bus virtio3: rpmsg host is online [ 7.885556] remoteproc remoteproc3: registered virtio3 (type 7) [ 7.885560] remoteproc remoteproc3: remote processor 41000000.dsp is now up [ 7.888200] virtio_rpmsg_bus virtio3: creating channel rpmsg-proto addr 0x3d [ 8.291492] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 8.320954] FAT-fs (mmcblk1p2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 8.360309] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 8.367861] FAT-fs (mmcblk1p3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. Starting TI MultiCore Tools Daemon... Starting Telephony service... Starting Avahi mDNS/DNS-SD Stack... Starting Login Service... Starting Network Service... Starting Print notice about GPLv3 packages... [ 8.656039] Bluetooth: Core ver 2.22 [ 8.662187] NET: Registered protocol family 31 [ 8.672418] Bluetooth: HCI device and connection manager initialized Starting uim-sysfs.service... [ 8.687329] Bluetooth: HCI socket layer initialized [ 8.687340] Bluetooth: L2CAP socket layer initialized [ 8.687370] Bluetooth: SCO socket layer initialized Starting Save/Restore Sound Card State... [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Started Kernel Logging Service. [ 8.754733] net eth1: initializing cpsw version 1.15 (0) [ 8.805068] net eth0: initialized cpsw ale version 1.4 [ 8.827100] net eth0: ALE Table size 1024 [ OK ] Started Network Service. [ OK ] Started TI MultiCore Tools Daemon. [ OK ] Started Save/Restore Sound Card State. [ 8.967543] rpmsg_rpc virtio0.rpmsg-rpc.-1.101: probing service rpc_example_2 with src 1024 dst 101 [ 8.997919] ti-pruss 4b200000.pruss: creating PRU cores and other child platform devices [ 8.998098] Micrel KSZ9031 Gigabit PHY 48485000.mdio:02: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=48485000.mdio:02, irq=-1) [ 9.000089] irq: no irq domain found for /ocp/pruss_soc_bus@4b226000/pruss@4b200000/intc@4b220000 ! [ 9.000899] irq: no irq domain found for /ocp/pruss_soc_bus@4b226000/pruss@4b200000/intc@4b220000 ! [ 9.001545] ti-pruss 4b280000.pruss: creating PRU cores and other child platform devices [ 9.003502] irq: no irq domain found for /ocp/pruss_soc_bus@4b2a6000/pruss@4b280000/intc@4b2a0000 ! [ 9.004294] irq: no irq domain found for /ocp/pruss_soc_bus@4b2a6000/pruss@4b280000/intc@4b2a0000 ! [ 9.039009] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 9.059599] net eth0: initializing cpsw version 1.15 (0) [ 9.093236] NET: Registered protocol family 43 [ 9.124189] remoteproc remoteproc4: 4b234000.pru0 is available [ 9.124230] pru-rproc 4b234000.pru0: PRU rproc node /ocp/pruss_soc_bus@4b226000/pruss@4b200000/pru@4b234000 probed successfully [ 9.124482] remoteproc remoteproc5: 4b238000.pru1 is available [ 9.124514] pru-rproc 4b238000.pru1: PRU rproc node /ocp/pruss_soc_bus@4b226000/pruss@4b200000/pru@4b238000 probed successfully [ 9.124747] remoteproc remoteproc6: 4b2b4000.pru0 is available [ 9.124787] pru-rproc 4b2b4000.pru0: PRU rproc node /ocp/pruss_soc_bus@4b2a6000/pruss@4b280000/pru@4b2b4000 probed successfully [ 9.125024] remoteproc remoteproc7: 4b2b8000.pru1 is available [ 9.125054] pru-rproc 4b2b8000.pru1: PRU rproc node /ocp/pruss_soc_bus@4b2a6000/pruss@4b280000/pru@4b2b8000 probed successfully [ 9.173741] usbcore: registered new interface driver usbfs [ 9.173786] usbcore: registered new interface driver hub [ 9.173861] usbcore: registered new device driver usb [ 9.187983] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 9.188002] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 9.200237] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x02010010 [ 9.200284] xhci-hcd xhci-hcd.1.auto: irq 475, io mem 0x48890000 [ 9.202435] hub 1-0:1.0: USB hub found [ 9.202674] hub 1-0:1.0: 1 port detected [ 9.202982] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 9.202994] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 9.203050] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 9.203898] hub 2-0:1.0: USB hub found [ 9.204110] hub 2-0:1.0: 1 port detected [ 9.243561] Micrel KSZ9031 Gigabit PHY 48485000.mdio:01: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=48485000.mdio:01, irq=-1) [ 9.263846] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.580398] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 9.635231] hub 2-1:1.0: USB hub found [ 9.635469] hub 2-1:1.0: 4 ports detected [ 9.760018] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 9.971282] hub 1-1:1.0: USB hub found [ 9.971688] hub 1-1:1.0: 4 ports detected [ OK ] Started Telephony service. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Reached target Sound Card. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 10.023940] rpmsg_rpc virtio1.rpmsg-rpc.-1.101: probing service dce-callback with src 1024 dst 101 Starting Load/Save Screen Backlight...htness of backlight:backlight... [ OK ] Reached target Network. Starting Network Name Resolution... Starting Permit User Sessions... [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. [ 10.024411] rpmsg_rpc virtio0.rpmsg-rpc.-1.101: published functions = 8 [ 10.024479] rpmsg_rpc virtio1.rpmsg-rpc.-1.102: probing service rpmsg-dce with src 1025 dst 102 [ 10.024852] rpmsg_rpc virtio1.rpmsg-rpc.-1.101: published functions = 4 [ 10.038464] rpmsg_rpc virtio1.rpmsg-rpc.-1.102: published functions = 9 Starting Simple Network Management Protocol (SNMP) Daemon.... Starting Enable and configure wl18xx bluetooth stack... Starting Lightning Fast Webserver With Light System Requirements... [ OK ] Started Load/Save Screen Backlight Brightness of backlight:backlight. [ OK ] Started Permit User Sessions. [ OK ] Started Login Service. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS2. [ OK ] Reached target Login Prompts. [ OK ] Started Network Name Resolution. [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ 10.329945] usb 1-1.3: new low-speed USB device number 3 using xhci-hcd [ OK ] Started Enable and configure wl18xx bluetooth stack. [ 10.442937] NET: Registered protocol family 15 [ 10.554223] Initializing XFRM netlink socket [ OK ] Started Simple Network Management Protocol (S[ 10.574330] input: Dell Dell USB Keyboard as /devices/platform/44000000.ocp/48880000.omap_dwc3_1/48890000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.3/1-1.3:1.0/0003:413C:2003.0001/input/input2 NMP) Daemon.. [ 10.660957] hid-generic 0003:413C:2003.0001: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-xhci-hcd.1.auto-1.3/input0 [ 10.675880] usbcore: registered new interface driver usbhid [ 10.683451] usbhid: USB HID core driver [ OK ] Started uim-sysfs.service. Starting rc.pvr.service... [ 10.984934] random: crng init done [ 11.012460] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [ OK ] Started rc.pvr.service. Starting weston.service... [ OK ] Started weston.service. Starting telnetd.service... Starting tiipclad-daemon.service... [ OK ] Started telnetd.service. [ OK ] Started tiipclad-daemon.service. Starting thttpd.service... [ OK ] Started thttpd.service. Starting rng-tools.service... [ OK ] Started rng-tools.service. Starting SYSV: The kdump script provides the support:... [FAILED] Failed to start SYSV: The kdump script provides the support:. See 'systemctl status kdump.service' for details. Starting gdbserverproxy.service... *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf binutils-dev binutils bison-dev bison cpp-symlinks cpp dosfstools g++-symlinks g++ gawk-dev gawk gcc-symlinks gcc gdb gdbc6x gdbserver gstreamer1.0-libav hidapi libcairo-perf-utils libgmp10 libidn11 libmpc3 libmpfr4 libreadline-dev libreadline6 m4-dev m4 make nettle parted swig-dev swig If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. [ 12.408526] cpsw 48484000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.416509] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] Started gdbserverproxy.service. Starting matrix-gui-2.0.service... [ OK ] Started matrix-gui-2.0.service. Starting thermal-zone-init.service... [ OK ] Started thermal-zone-init.service. [ OK ] Reached target Multi-User System. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am57xx-evm ttyS2 Arago 2017.05 am57xx-evm ttyS2 am57xx-evm login: root root@am57xx-evm:~# cd /lib/modules/4.9.28-geed43d1050/extra root@am57xx-evm:/lib/modules/4.9.28-geed43d1050/extra# ls bc_example.ko debugss_kmodule.ko gdbserverproxy.ko cmemk.ko driver pvrsrvkm.ko cryptodev.ko galcore.ko uio_module_drv.ko root@am57xx-evm:/lib/modules/4.9.28-geed43d1050/extra# insmod debugss_kmodule.ko root@am57xx-evm:/lib/modules/4.9.28-geed43d1050/extra# dsptop dsptop internal error: Fatal: : Can not open debugss module device_name sysfs entry for reading root@am57xx-evm:/lib/modules/4.9.28-geed43d1050/extra# lsmod Module Size Used by debugss_kmodule 6912 0 bc_example 7326 0 sha512_generic 9967 0 sha512_arm 12252 0 sha256_generic 10178 0 sha1_generic 2864 0 sha1_arm_neon 6261 0 sha1_arm 3862 1 sha1_arm_neon md5 2219 0 cbc 2388 0 usbhid 19929 0 xfrm_user 23037 2 xfrm4_tunnel 2040 0 ipcomp 2473 0 xfrm_ipcomp 4695 1 ipcomp esp4 6401 0 ah4 5665 0 af_key 27691 0 xfrm_algo 6989 5 xfrm_user,esp4,ah4,af_key,xfrm_ipcomp xhci_plat_hcd 6475 0 xhci_hcd 109037 1 xhci_plat_hcd usbcore 200102 3 usbhid,xhci_plat_hcd,xhci_hcd pru_rproc 10520 0 pruss_intc 7227 1 pru_rproc rpmsg_proto 6799 0 dwc3 71637 0 pruss 9774 1 pru_rproc rpmsg_rpc 20026 0 udc_core 19514 1 dwc3 usb_common 4737 3 udc_core,usbcore,dwc3 bluetooth 335515 2 omap_aes_driver 19101 0 snd_soc_simple_card 5844 0 snd_soc_simple_card_utils 5095 1 snd_soc_simple_card snd_soc_omap_hdmi_audio 4737 0 ahci_platform 3474 0 libahci_platform 8821 1 ahci_platform pvrsrvkm 409225 5 bc_example libahci 28679 2 ahci_platform,libahci_platform libata 206117 3 ahci_platform,libahci_platform,libahci omap_sham 21538 0 pruss_soc_bus 4207 0 omap_wdt 4634 0 ti_vip 40133 0 scsi_mod 133717 1 libata rtc_omap 9662 0 snd_soc_tlv320aic3x 48324 1 dwc3_omap 5196 0 omap_des 11525 0 ti_vpe 18826 0 ti_sc 24305 2 ti_vpe,ti_vip ti_csc 2351 2 ti_vpe,ti_vip ti_vpdma 15166 2 ti_vpe,ti_vip des_generic 17608 1 omap_des crypto_engine 6458 2 omap_des,omap_aes_driver mt9t11x 14536 0 pixcir_i2c_ts 6716 0 extcon_palmas 5917 0 rtc_ds1307 14224 0 extcon_core 16771 3 dwc3_omap,extcon_palmas,dwc3 rtc_palmas 5322 0 omap_remoteproc 12473 0 virtio_rpmsg_bus 9802 2 rpmsg_rpc,rpmsg_proto rpmsg_core 7252 3 rpmsg_rpc,rpmsg_proto,virtio_rpmsg_bus remoteproc 29043 4 pru_rproc,rpmsg_rpc,omap_remoteproc,rpmsg_proto sch_fq_codel 9039 3 uio_module_drv 7417 0 uio 9137 1 uio_module_drv gdbserverproxy 4667 0 cryptodev 37839 2 cmemk 35483 2 root@am57xx-evm:/lib/modules/4.9.28-geed43d1050/extra#