U-Boot SPL 2018.07 (Oct 29 2019 - 11:05:07 +0100) Trying to boot from MMC1 Loading Environment from FAT... *** Warning - bad CRC, using default environment Failed (-5) U-Boot 2018.07 (Oct 29 2019 - 11:05:07 +0100) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... *** Warning - bad CRC, using default environment Failed (-5) No USB device found not set. Validating first E-fuse MAC Net: eth0: ethernet@4a100000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 ** Unable to read file boot.scr ** 376 bytes read in 1 ms (367.2 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... Running uenvcmd ... 5561848 bytes read in 355 ms (14.9 MiB/s) 36793 bytes read in 5 ms (7 MiB/s) bootargs=console=ttyO0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8fff4000, end 8fffffb8 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.40 (user1@ubuntu) (gcc version 7.4.0 (Buildroot 2019.02.6)) #2 SMP Tue Oct 29 12:54:59 CET 2019 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 17 pages/cpu @df93c000 s40872 r8192 d20568 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 479872K/522240K available (8192K kernel code, 817K rwdata, 2424K rodata, 1024K init, 7548K bss, 25984K reserved, 16384K cma -reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0900000 (9184 kB) [ 0.000000] .init : 0xc0c00000 - 0xc0d00000 (1024 kB) [ 0.000000] .data : 0xc0d00000 - 0xc0dcc7f8 ( 818 kB) [ 0.000000] .bss : 0xc0dce000 - 0xc152d054 (7549 kB) [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000017] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000047] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000099] OMAP clocksource: timer1 at 24000000 Hz [ 0.000640] timer_probe: no matching timers found [ 0.001537] Console: colour dummy device 80x30 [ 0.001585] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001599] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001611] ... MAX_LOCK_DEPTH: 48 [ 0.001623] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001636] ... CLASSHASH_SIZE: 4096 [ 0.001648] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001660] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001672] ... CHAINHASH_SIZE: 32768 [ 0.001684] memory used by lock dependency info: 4655 kB [ 0.001696] per task-struct memory footprint: 1536 bytes [ 0.001730] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) [ 0.078628] pid_max: default: 32768 minimum: 301 [ 0.079031] Security Framework initialized [ 0.079168] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.079189] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.082303] CPU: Testing write buffer coherency: ok [ 0.083802] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.085293] Setting up static identity map for 0x80100000 - 0x80100078 [ 0.085864] Hierarchical SRCU implementation. [ 0.087492] smp: Bringing up secondary CPUs ... [ 0.087516] smp: Brought up 1 node, 1 CPU [ 0.087533] SMP: Total of 1 processors activated (996.14 BogoMIPS). [ 0.087548] CPU: All CPU(s) started in SVC mode. [ 0.091481] devtmpfs: initialized [ 0.116400] random: get_random_u32 called from bucket_table_alloc+0xe4/0x23c with crng_init=0 [ 0.117377] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.118184] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.118249] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.120047] pinctrl core: initialized pinctrl subsystem [ 0.124716] NET: Registered protocol family 16 [ 0.131746] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.230464] cpuidle: using governor menu [ 0.243207] OMAP GPIO hardware version 0.1 [ 0.269642] No ATAGs? [ 0.269658] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.269970] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.269990] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.307326] edma 49000000.edma: TI EDMA DMA engine driver [ 0.312628] SCSI subsystem initialized [ 0.314620] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring prob e [ 0.314852] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring prob e [ 0.315179] pps_core: LinuxPPS API ver. 1 registered [ 0.315196] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.315264] PTP clock support registered [ 0.319232] clocksource: Switched to clocksource timer1 [ 0.453454] VFS: Disk quotas dquot_6.6.0 [ 0.453647] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.479860] NET: Registered protocol family 2 [ 0.481637] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.481742] TCP bind hash table entries: 4096 (order: 5, 147456 bytes) [ 0.482915] TCP: Hash tables configured (established 4096 bind 4096) [ 0.483294] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.483479] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.484220] NET: Registered protocol family 1 [ 0.486339] RPC: Registered named UNIX socket transport module. [ 0.486386] RPC: Registered udp transport module. [ 0.486401] RPC: Registered tcp transport module. [ 0.486415] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.488985] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.490247] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 0.492956] audit: initializing netlink subsys (disabled) [ 0.495606] audit: type=2000 audit(0.490:1): state=initialized audit_enabled=0 res=1 [ 0.495924] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.498637] NFS: Registering the id_resolver key type [ 0.499001] Key type id_resolver registered [ 0.499038] Key type id_legacy registered [ 0.499440] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.505976] io scheduler noop registered [ 0.506006] io scheduler deadline registered [ 0.506134] io scheduler cfq registered (default) [ 0.506152] io scheduler mq-deadline registered [ 0.506167] io scheduler kyber registered [ 0.508327] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.514106] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled [ 0.520386] omap_uart 44e09000.serial: no wakeirq for uart0 [ 0.520772] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a OMAP UART0 [ 1.244711] console [ttyO0] enabled [ 1.277893] brd: module loaded [ 1.307001] loop: module loaded [ 1.312982] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.322837] libphy: Fixed MDIO Bus: probed [ 1.399286] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 1.407318] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.418103] libphy: 4a101000.mdio: probed [ 1.422536] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 1.433732] cpsw 4a100000.ethernet: Detected MACID = 54:4a:16:e5:64:53 [ 1.441101] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 [ 1.447752] cpsw 4a100000.ethernet: ALE Table size 1024 [ 1.453419] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) [ 1.464097] i2c /dev entries driver [ 1.471972] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.577178] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.587744] mmc0: new high speed SDHC card at address 59b4 [ 1.597018] ledtrig-cpu: registered to indicate activity on CPUs [ 1.606808] oprofile: using arm/armv7 [ 1.611485] Initializing XFRM netlink socket [ 1.616379] NET: Registered protocol family 10 [ 1.624372] mmcblk0: mmc0:59b4 USDU1 14.9 GiB [ 1.635809] mmcblk0: p1 p2 [ 1.645026] Segment Routing with IPv6 [ 1.648994] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.657258] NET: Registered protocol family 17 [ 1.662131] NET: Registered protocol family 15 [ 1.667115] Key type dns_resolver registered [ 1.671840] omap_voltage_late_init: Voltage driver support not added [ 1.678494] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 1.687024] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 1.696006] ThumbEE CPU extension supported. [ 1.700607] Registering SWP/SWPB emulation handler [ 1.705614] SmartReflex Class3 initialized [ 1.761882] mmc1: new high speed MMC card at address 0001 [ 1.769245] mmcblk1: mmc1:0001 MMC04G 3.66 GiB [ 1.775680] mmcblk1boot0: mmc1:0001 MMC04G partition 1 1.00 MiB [ 1.784611] mmcblk1boot1: mmc1:0001 MMC04G partition 2 1.00 MiB [ 1.792387] random: fast init done [ 1.796312] mmcblk1rpmb: mmc1:0001 MMC04G partition 3 128 KiB [ 1.830428] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.837106] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.847163] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.854627] hctosys: unable to open rtc device (rtc0) [ 1.860062] sr_init: No PMIC hook to init smartreflex [ 1.865604] sr_init: platform driver register failed for SR [ 1.937077] EXT4-fs (mmcblk0p2): recovery complete [ 1.946046] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.954841] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.964264] devtmpfs: mounted [ 1.969519] Freeing unused kernel memory: 1024K Starting syslogd: OK Starting klogd: OK Starting mdev... [ 4.522307] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 5.135628] input: tps65217_pwrbutton as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 [ 5.262373] omap_rng 48310000.rng: Random Number Generator ver. 20 [ 5.350666] omap_rtc 44e3e000.rtc: already running [ 5.380583] omap_rtc 44e3e000.rtc: registered as rtc0 [ 5.661875] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 6.152413] usbcore: registered new interface driver usbfs [ 6.158739] usbcore: registered new interface driver hub [ 6.164700] usbcore: registered new device driver usb Initializing random number generator... [ 6.853543] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regu lator [ 7.293359] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator [ 7.345568] random: dd: uninitialized urandom read (512 bytes read) done. [ 7.478834] musb-hdrc musb-hdrc.1: MUSB HDRC host driver [ 7.485338] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 Starting rngd: OK [ 7.683456] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.690926] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.698478] usb usb1: Product: MUSB HDRC host driver [ 7.703779] usb usb1: Manufacturer: Linux 4.14.40 musb-hcd [ 7.709561] usb usb1: SerialNumber: musb-hdrc.1 [ 7.739594] random: crng init done Starting network: [ 7.791652] hub 1-0:1.0: USB hub found [ 7.826546] hub 1-0:1.0: 1 port detected OK Starting sshd: OK Welcome to Buildroot buildroot login: