U-Boot SPL 2017.01-00458-gccd1c34-dirty (Jan 03 2020 - 11:22:10) Trying to boot from MMC1 SPL: Please implement spl_start_uboot() for your board SPL: Direct Linux boot not active! reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2017.01-00458-gccd1c34-dirty (Jan 03 2020 - 11:22:10 -0600) CPU : AM437X-GP rev 1.2 Model: TI AM437x UTI BOARD DRAM: 512 MiB PMIC: TPS65218 NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 reading uboot.env Net: Mac Addr = f0:b5:d1:3e:99:d0 Could not get PHY for cpsw: addr 1 cpsw Hit any key to stop autoboot: 0 ## Error: "findfdt" not defined reading uEnv.txt 717 bytes read in 5 ms (139.6 KiB/s) Importing environment from mmc0 ... 3642024 bytes read in 941 ms (3.7 MiB/s) 55008 bytes read in 55 ms (976.6 KiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffef000, end 8ffff6df ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.69-g9ce43c71ae (root@UTI-CPELNX-02) (gcc version 6.2.1 20161016 (Li0 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt:Machine model: TI AM437x UTI BOARD [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 48 MiB at 0x9d000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM437x ES1.2 (sgx neon) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: console=ttyO0,115200n8 video=HDMI-A-1:800x600 root=/dev/nfs nfsrp [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 457892K/524288K available (7168K kernel code, 292K rwdata, 2384K rodata, 1024) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB) [ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB) [ 0.000000] .data : 0xc0c00000 - 0xc0c49088 ( 293 kB) [ 0.000000] .bss : 0xc0c49088 - 0xc0c8f7b4 ( 282 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e030000 -> 0x3e430000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e030000 -> 0x3e430000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c9, AUX_CTRL 0x4e430000 [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000012] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000030] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7963585194s [ 0.000038] OMAP clocksource: timer1 at 24000000 Hz [ 0.000419] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327s [ 0.000429] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000804] Console: colour dummy device 80x30 [ 0.000831] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.000837] This ensures that you still see kernel messages. Please [ 0.000842] update your kernel commandline. [ 0.000858] Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896) [ 0.060175] pid_max: default: 32768 minimum: 301 [ 0.060289] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.060300] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.061034] CPU: Testing write buffer coherency: ok [ 0.061372] Setting up static identity map for 0x80100000 - 0x80100060 [ 0.062122] EFI services will not be available. [ 0.062838] devtmpfs: initialized [ 0.074306] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.074608] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 191126044s [ 0.074630] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.077831] pinctrl core: initialized pinctrl subsystem [ 0.078894] NET: Registered protocol family 16 [ 0.080340] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.180185] cpuidle: using governor ladder [ 0.210173] cpuidle: using governor menu [ 0.217171] OMAP GPIO hardware version 0.1 [ 0.217785] omap_gpio 4804c000.gpio: could not find pctldev for node /ocp@44000000/l4_wkup@44c000e [ 0.218125] omap_gpio 481ac000.gpio: could not find pctldev for node /ocp@44000000/l4_wkup@44c000e [ 0.218414] omap_gpio 481ae000.gpio: could not find pctldev for node /ocp@44000000/l4_wkup@44c000e [ 0.218698] omap_gpio 48320000.gpio: could not find pctldev for node /ocp@44000000/l4_wkup@44c000e [ 0.218970] omap_gpio 48322000.gpio: could not find pctldev for node /ocp@44000000/l4_wkup@44c000e [ 0.226385] No ATAGs? [ 0.226412] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.226424] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.266774] edma 49000000.edma: TI EDMA DMA engine driver [ 0.271626] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp@44000000/l4_wkup@44c00000e [ 0.271682] omap_i2c 4802a000.i2c: could not find pctldev for node /ocp@44000000/l4_wkup@44c00000e [ 0.271825] media: Linux media interface: v0.10 [ 0.271875] Linux video capture interface: v2.00 [ 0.271914] pps_core: LinuxPPS API ver. 1 registered [ 0.271921] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.271941] PTP clock support registered [ 0.271973] EDAC MC: Ver: 3.0.0 [ 0.272808] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 0.273147] Advanced Linux Sound Architecture Driver Initialized. [ 0.274127] clocksource: Switched to clocksource timer1 [ 0.282306] NET: Registered protocol family 2 [ 0.282945] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.282988] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.283029] TCP: Hash tables configured (established 4096 bind 4096) [ 0.283118] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.283134] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.283256] NET: Registered protocol family 1 [ 0.283633] RPC: Registered named UNIX socket transport module. [ 0.283646] RPC: Registered udp transport module. [ 0.283652] RPC: Registered tcp transport module. [ 0.283657] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.286075] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.291219] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.291952] NFS: Registering the id_resolver key type [ 0.291988] Key type id_resolver registered [ 0.291995] Key type id_legacy registered [ 0.292036] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.293613] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.293629] io scheduler noop registered [ 0.293636] io scheduler deadline registered [ 0.293746] io scheduler cfq registered (default) [ 0.295616] pinctrl-single 44e10800.pinmux: 199 pins at pa f9e10800 size 796 [ 0.298522] backlight supply power not found, using dummy regulator [ 0.344909] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.347365] omap8250 44e09000.serial: No clock speed specified: using default: 48000000 [ 0.348088] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250 [ 1.079229] console [ttyS0] enabled [ 1.083168] omap8250 481a6000.serial: No clock speed specified: using default: 48000000 [ 1.091861] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 31, base_baud = 3000000) is a 8250 [ 1.102320] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 [ 1.109212] [drm] Initialized [ 1.113486] 4832a000.dss supply vdda_video not found, using dummy regulator [ 1.120673] OMAP DSS rev 2.0 [ 1.123718] omapdss_dss 4832a000.dss: bound 4832a400.dispc (ops dispc_component_ops) [ 1.132884] display supply vcc not found, using dummy regulator [ 1.151570] brd: module loaded [ 1.160538] loop: module loaded [ 1.167253] libphy: Fixed MDIO Bus: probed [ 1.186980] cpsw 4a100000.ethernet: Detected MACID = f0:b5:d1:3e:b3:83 [ 1.193636] cpsw 4a100000.ethernet: device node lookup for pps timer failed [ 1.200712] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) [ 1.209388] mousedev: PS/2 mouse device common for all mice [ 1.215491] i2c /dev entries driver [ 1.220783] cpuidle: enable-method property 'ti,am4372' found operations [ 1.284861] omap_hsmmc 47810000.mmc: RX DMA channel request failed [ 1.295184] ledtrig-cpu: registered to indicate activity on CPUs [ 1.307263] NET: Registered protocol family 10 [ 1.312996] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.319711] NET: Registered protocol family 17 [ 1.324533] Key type dns_resolver registered [ 1.329033] omap_voltage_late_init: Voltage driver support not added [ 1.341631] omapdrm omapdrm.0: DMM not available, disable DMM support [ 1.348267] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.356462] mmc0: new high speed SDHC card at address 1234 [ 1.363016] mmcblk0: mmc0:1234 SA16G 14.5 GiB [ 1.368357] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.375189] mmcblk0: p1 p2 [ 1.378742] [drm] No driver support for vblank timestamp query. [ 1.466413] Console: switching to colour frame buffer device 128x37 [ 1.494607] omapdrm omapdrm.0: fb0: omapdrm frame buffer device [ 1.530273] GPIO line 147 (AVDD_EN) hogged as output/high [ 1.579090] omap_i2c 44e0b000.i2c: bus 0 rev0.12 at 100 kHz [ 1.585940] omap_i2c 4802a000.i2c: bus 1 rev0.12 at 100 kHz [ 1.664178] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.670311] davinci_mdio 4a101000.mdio: detected phy mask fffffffd [ 1.677204] libphy: 4a101000.mdio: probed [ 1.681268] davinci_mdio 4a101000.mdio: phy[1]: device 4a101000.mdio:01, driver NS DP83848C 10/10Y [ 1.695024] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.702354] hctosys: unable to open rtc device (rtc0) [ 1.708624] net eth0: initializing cpsw version 1.15 (0) [ 1.713976] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 [ 1.720451] cpsw 4a100000.ethernet: ALE Table size 1024 [ 1.824516] NS DP83848C 10/100 Mbps PHY 4a101000.mdio:01: attached PHY driver [NS DP83848C 10/100) [ 1.840211] cpts ptp bc clkid 0 [ 1.846296] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.549969] random: fast init done [ 3.924923] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 3.944248] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 3.974367] Sending DHCP requests ., OK [ 4.064215] IP-Config: Got DHCP answer from 192.168.61.1, my address is 192.168.61.106 [ 4.072190] IP-Config: Complete: [ 4.075503] device=eth0, hwaddr=f0:b5:d1:3e:b3:83, ipaddr=192.168.61.106, mask=255.255.255.01 [ 4.085966] host=192.168.61.106, domain=ULTRATEC.ENTERPRISE.local, nis-domain=(none) [ 4.094235] bootserver=0.0.0.0, rootserver=192.168.61.101, rootpath= nameserver0=192.1680 [ 4.106631] vmmcwl_fixed: disabling [ 4.110171] ALSA device list: [ 4.113161] No soundcards found. [ 5.209795] VFS: Mounted root (nfs filesystem) on device 0:15. [ 5.216655] devtmpfs: mounted [ 5.221997] Freeing unused kernel memory: 1024K [ 5.563245] systemd[1]: System time before build time, advancing clock. [ 5.630316] systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR ) [ 5.649372] systemd[1]: Detected architecture arm. Welcome to Arago 2017.12! [ 5.686214] systemd[1]: Set hostname to . [ 6.463933] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 6.505506] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 6.536388] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 6.564986] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 6.604875] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 6.635594] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 6.684756] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Reached target Swap. [ OK ] Reached target Remote File Systems. [ OK ] Listening on Journal Socket. [ OK ] Created slice System Slice. Starting Psplash Boot Screen... [ OK ] Reached target Slices. Mounting POSIX Message Queue File System... Mounting Temporary Directory... Starting alignment.service... Starting Remount Root and Kernel File Systems... [ OK ] Created slice system-getty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. Mounting Debug File System... [ 7.260470] random: crng init done Starting Load Kernel Modules... Starting Create list of required st... nodes for the current kernel... Starting Journal Service... Starting Setup Virtual Console... [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Reached target Paths. [ 7.531015] cmemk: loading out-of-tree module taints kernel. [ 7.555794] CMEMK module: reference Linux version 4.9.69 [ 7.574466] no physical memory specified [ 7.578444] cmemk initialized [ OK ] Mounted Debug File System. [ 7.614597] cryptodev: driver 1.8 loaded. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Temporary Directory. [ 7.668306] usbcore: registered new interface driver usbfs [ 7.673912] usbcore: registered new interface driver hub [ OK ] Started Psplash Boot Screen. [ 7.727905] usbcore: registered new device driver usb [ OK ] Started alignment.service. [ 7.784443] usbcore: registered new interface driver usbserial [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Create list of required sta...ce node[ 7.830612] usbcore: registered new interfao s for the current kernel. [ 7.858769] usbserial: USB Serial support registered for FTDI USB Serial Device [ OK ] Started Setup Virtual Console. [ OK ] Started Journal Service. [ OK ] Started Load Kernel Modules. Mounting Configuration File System... Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev... Starting Flush Journal to Persistent Storage... Starting udev Coldplug all Devices... [ OK ] Mounted Configuration File System. [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. [ 8.455516] systemd-journald[97]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /var/volatile... Mounting /media/ram... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Started Load/Save Random Seed. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ 10.444096] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 10.542088] remoteproc remoteproc0: wkup_m3 is available [ OK ] Started udev Coldplug all Devices. [ 10.617088] omap_rtc 44e3e000.rtc: already running [ 10.670026] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ OK ] Found device /dev/ttyS0. [ OK ] Reached target System Initialization. [ 10.809537] remoteproc remoteproc0: powering up wkup_m3 [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ 10.970489] 1-0018 supply IOVDD not found, using dummy regulator [ 11.013018] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 224268 [ 11.013846] remoteproc remoteproc0: remote processor wkup_m3 is now up [ 11.013971] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192 [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ 11.349702] 1-0018 supply DVDD not found, using dummy regulator [ 11.452357] 1-0018 supply AVDD not found, using dummy regulator [ OK ] Listening on dropbear.socket. [ 11.505671] 1-0018 supply DRVDD not found, using dummy regulator [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started Kernel Logging Service. [ OK ] Started Job spooling tools. Starting Print notice about GPLv3 packages... Starting Login Service... [ 11.926405] omap-sham 53100000.sham: hw accel on OMAP rev 0.0 [ OK ] Started D-Bus System Message Bus. [ 12.198278] omap-aes 53501000.aes: OMAP AES hw accel rev: 0.1 [ 12.298403] omap-aes 53501000.aes: will run requests pump with realtime priority [ 12.466144] omap-des 53701000.des: OMAP DES hw accel rev: 0.33 [ 12.509262] omap-des 53701000.des: will run requests pump with realtime priority [ 12.697138] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 [ 12.926428] input: matrix_keypad0 as /devices/platform/matrix_keypad0/input/input1 [ 13.080372] PM: bootloader does not support rtc-only! [ 13.389825] asoc-simple-card sound0: tlv320aic3x-hifi <-> 4803c000.mcasp mapping ok [ 13.578646] asoc-simple-card sound1: wilink8_bt-hifi <-> 48038000.mcasp mapping ok Starting Telephony service... [ OK ] Started System Logging Service. Starting uim-sysfs.service... Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started Periodic Command Scheduler. Starting Save/Restore Sound Card State... Starting Network Service... [ OK ] Started Network Service. [ 15.982436] Bluetooth: Core ver 2.22 [ 16.170641] NET: Registered protocol family 31 [ 16.193323] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem [ 16.241015] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Started Save/Restore Sound Card State. [ 16.568885] Bluetooth: HCI device and connection manager initialized [ 16.697314] Bluetooth: HCI socket layer initialized [ 16.784633] Bluetooth: L2CAP socket layer initialized [ 16.812836] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Plea. [ 17.055141] Bluetooth: SCO socket layer initialized [ OK ] Started Telephony service. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Login Service. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Starting Wait for Network to be Configured... [ OK ] Reached target Network. Starting Network Name Resolution... Starting Permit User Sessions... Starting Simple Network Management Protocol (SNMP) Daemon.... [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. Starting Enable and configure wl18xx bluetooth stack... Starting Lightning Fast Webserver With Light System Requirements... [ OK ] Created slice system-systemd\x2dbacklight.slice. Starting Load/Save Screen Backlight...htness of backlight:backlight... [ OK ] Started Wait for Network to be Configured. [ OK ] Started uim-sysfs.service. [ OK ] Started Permit User Sessions. [ OK ] Started Load/Save Screen Backlight Brightness of backlight:backlight. [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started Enable and configure wl18xx bluetooth stack. [ OK ] Started Network Name Resolution. [ 21.953318] NET: Registered protocol family 15 [ 22.542411] input: ti-tsc as /devices/platform/44000000.ocp/44e0d000.tscadc/TI-am335x-tsc/input/i2 [ OK ] Started Simple Network Management Protocol (SNMP) Daemon.. [ 23.285249] Initializing XFRM netlink socket *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf binutils cifs-utils cpio cpp-symlinks cpp dosfstools findutils g++-symlinks g++ gawk-dev gawk gcc-symlinks gcc gdb gdbserver glmark2 gstreamer1.0-libav gzip hidapi libcairo-perf-utils libgmp10 libidn11 libmavconn libmpc3 libmpfr4 libreadline-dev libreadline6 m4-dev m4 make mavlink mavros-extras mavros-msgs mavros nettle socketcan-interface swig-dev swig which If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. [ OK ] Reached target Sound Card. [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... Starting rc.pvr.service... [ OK ] Reached target Network is Online. [ OK ] Started Synchronize System and HW clocks. [ 29.229761] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [ OK ] Started rc.pvr.service. Starting telnetd.service... [ OK ] Started telnetd.service. Starting thttpd.service... [ OK ] Started thttpd.service. Starting rng-tools.service... [ OK ] Started rng-tools.service. Starting LSB: Redis, a key-value store... [ OK ] Started LSB: Redis, a key-value store. Starting thermal-zone-init.service... Starting parse-ip.service... [ OK ] Started thermal-zone-init.service. [ OK ] Started parse-ip.service. Starting UTI_init.service... Starting Terminate Psplash Boot Screen... [ OK ] Started UTI_init.service. [ OK ] Started Terminate Psplash Boot Screen. [ OK ] Reached target Multi-User System. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes.