U-Boot SPL 2016.05-g9694c57-dirty (Jul 03 2018 - 17:05:47) DRA752-GP ES2.0 no pinctrl for hs200_1_8v no pinctrl for ddr_1_8v @SD max clock = 10000000@ *** Warning - bad CRC, using default environment Trying to boot from MMC1 *** Warning - bad CRC, using default environment reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2016.05-g9694c57-dirty (Jul 03 2018 - 17:05:47 +0800) CPU : DRA752-GP ES2.0 Model: TI DRA742 Board: DRA74x EVM REV DRAM: 2 GiB NAND: 256 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Warning - bad CRC, using default environment current ID is 7 Warning: fastboot.board_rev: unknown board revision GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid GPT *** GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid Backup GPT *** ERROR: cannot find partition: 'userdata' at arch/arm/cpu/armv7/omap-common/utils.c:199/mmc_get_part_size() Warning: fastboot.userdata_size: unable to calc SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: Warning: ethernet@48484000 using MAC address from ROM eth0: ethernet@48484000 Hit any key to stop autoboot: 0 load MAN2020_original.dtb load MAN2020_3g switch to partitions #0, OK mmc0 is current device @SD max clock = 10000000@ SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 222 bytes read in 3 ms (72.3 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... @SD max clock = 10000000@ switch to partitions #0, OK mmc0 is current device @SD max clock = 10000000@ SD/MMC found on device 0 3646824 bytes read in 783 ms (4.4 MiB/s) 111412 bytes read in 84 ms (1.3 MiB/s) Booting from mmc0 ... Kernel image @ 0x82000000 [ 0x000000 - 0x37a568 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe1000, end 8ffff333 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.45-g0422030-dirty (hsuyz@hsuyz-VirtualBox) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #7 SMP PREEMPT Tue Jul 3 17:06:08 CST 2018 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA742 [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] Forcing write-allocate cache policy for SMP [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] DRA752 ES2.0 [ 0.000000] PERCPU: Embedded 11 pages/cpu @eed9f000 s14848 r8192 d22016 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517952 [ 0.000000] Kernel command line: console=ttyO3,115200n8 elevator=noop root=/dev/mmcblk0p2 rw rootwait earlyprintk fixrtc omapdrm.num_crtc=2 consoleblank=0 cma=64M rootfstype=ext4 snd.slots_reserved=1,1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1983284K/2078720K available (6655K kernel code, 364K rwdata, 2500K rodata, 336K init, 302K bss, 29900K reserved, 65536K cma-reserved, 1226752K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08f909c (9157 kB) [ 0.000000] .init : 0xc08fa000 - 0xc094e000 ( 336 kB) [ 0.000000] .data : 0xc094e000 - 0xc09a9250 ( 365 kB) [ 0.000000] .bss : 0xc09ab000 - 0xc09f6a78 ( 303 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div [ 0.000000] OMAP clockevent source: timer1 at 31475 Hz [ 0.000000] Architected cp15 timer(s) running at 5.90MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x15c70fb29, max_idle_ns: 440795202138 ns [ 0.000005] sched_clock: 56 bits at 5MHz, resolution 169ns, wraps every 4398046511093ns [ 0.000015] Switching to timer-based delay loop, resolution 169ns [ 0.000337] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000344] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000814] Console: colour dummy device 80x30 [ 0.000831] WARNING: Your 'console=ttyO3' has been replaced by 'ttyS3' [ 0.000838] This ensures that you still see kernel messages. Please [ 0.000844] update your kernel commandline. [ 0.000858] Calibrating delay loop (skipped), value calculated using timer frequency.. 11.80 BogoMIPS (lpj=59016) [ 0.000871] pid_max: default: 32768 minimum: 301 [ 0.000962] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000972] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001543] Initializing cgroup subsys io [ 0.001561] Initializing cgroup subsys memory [ 0.001586] Initializing cgroup subsys devices [ 0.001598] Initializing cgroup subsys freezer [ 0.001610] Initializing cgroup subsys perf_event [ 0.001621] Initializing cgroup subsys pids [ 0.001648] CPU: Testing write buffer coherency: ok [ 0.001863] /cpus/cpu@0 missing clock-frequency property [ 0.001879] /cpus/cpu@1 missing clock-frequency property [ 0.001889] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001926] Setting up static identity map for 0x800082c0 - 0x80008320 [ 0.080106] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.080167] Brought up 2 CPUs [ 0.080181] SMP: Total of 2 processors activated (23.60 BogoMIPS). [ 0.080187] CPU: All CPU(s) started in HYP mode. [ 0.080193] CPU: Virtualization extensions available. [ 0.080578] devtmpfs: initialized [ 0.110358] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.111367] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.304928] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.306414] pinctrl core: initialized pinctrl subsystem [ 0.307274] NET: Registered protocol family 16 [ 0.308267] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.330199] cpuidle: using governor ladder [ 0.360223] cpuidle: using governor menu [ 0.368549] OMAP GPIO hardware version 0.1 [ 0.372675] GPIO line 161 (radio_rst) hogged as output/low [ 0.375040] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.391941] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.391954] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.401071] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.401081] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.401902] OMAP DMA hardware revision 0.0 [ 0.441715] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.442874] edma 43300000.edma: memcpy is disabled [ 0.447697] edma 43300000.edma: TI EDMA DMA engine driver [ 0.454478] palmas 0-0058: IRQ missing: skipping irq request [ 0.471337] palmas 0-0058: Muxing GPIO a, PWM 0, LED 0 [ 0.471457] @@@@1 [ 0.471676] @@@@3 [ 0.471684] @@@@4 [ 0.471693] @@@@5 [ 0.472042] @@@@6 [ 0.472206] @@@@7 [ 0.480838] @@@@8 [ 0.543010] @@@@9(0) [ 0.543028] @@@@2 [ 0.543173] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.543592] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz [ 0.543960] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 0.544317] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz [ 0.544676] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 0.544869] media: Linux media interface: v0.10 [ 0.544927] Linux video capture interface: v2.00 [ 0.544969] pps_core: LinuxPPS API ver. 1 registered [ 0.544976] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.545002] PTP clock support registered [ 0.545052] EDAC MC: Ver: 3.0.0 [ 0.545844] Advanced Linux Sound Architecture Driver Initialized. [ 0.546745] clocksource: Switched to clocksource arch_sys_counter [ 0.557432] NET: Registered protocol family 2 [ 0.557934] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.557997] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.558122] TCP: Hash tables configured (established 8192 bind 8192) [ 0.558177] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.558208] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.558421] NET: Registered protocol family 1 [ 0.558689] RPC: Registered named UNIX socket transport module. [ 0.558699] RPC: Registered udp transport module. [ 0.558706] RPC: Registered tcp transport module. [ 0.558711] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.559764] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.562436] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.570158] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.570816] NFS: Registering the id_resolver key type [ 0.570844] Key type id_resolver registered [ 0.570851] Key type id_legacy registered [ 0.570913] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.572893] bounce: pool size: 64 pages [ 0.573049] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.573065] io scheduler noop registered (default) [ 0.573078] io scheduler deadline registered [ 0.573111] io scheduler cfq registered [ 0.578417] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.641952] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.645397] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 299, base_baud = 3000000) is a 8250 [ 0.646271] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 300, base_baud = 3000000) is a 8250 [ 0.647168] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 301, base_baud = 3000000) is a 8250 [ 0.648003] console [ttyS3] disabled [ 0.648048] 4806e000.serial: ttyS3 at MMIO 0x4806e000 (irq = 302, base_baud = 3000000) is a 8250 [ 1.449072] console [ttyS3] enabled [ 1.453434] 48066000.serial: ttyS4 at MMIO 0x48066000 (irq = 303, base_baud = 3000000) is a 8250 [ 1.463085] 48422000.serial: ttyS7 at MMIO 0x48422000 (irq = 304, base_baud = 3000000) is a 8250 [ 1.472746] 48424000.serial: ttyS8 at MMIO 0x48424000 (irq = 305, base_baud = 3000000) is a 8250 [ 1.482398] 4ae2b000.serial: ttyS9 at MMIO 0x4ae2b000 (irq = 306, base_baud = 3000000) is a 8250 [ 1.492467] [drm] Initialized drm 1.1.0 20060810 [ 1.504352] loop: module loaded [ 1.508395] nand: No NAND device found [ 1.512167] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch [ 1.524631] m25p80 spi32766.0: s25fl256s1 (32768 Kbytes) [ 1.530052] 7 ofpart partitions found on MTD device spi32766.0 [ 1.535911] Creating 7 MTD partitions on "spi32766.0": [ 1.541089] 0x000000000000-0x000000040000 : "QSPI.MLO" [ 1.547178] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 1.553468] 0x000000140000-0x0000001c0000 : "QSPI.DRA7-evm.dtb" [ 1.560299] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 1.566953] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 1.574306] 0x0000001e0000-0x0000009e0000 : "QSPI.uImage" [ 1.580608] 0x0000009e0000-0x000002000000 : "QSPI.IPU-exe" [ 1.588017] libphy: Fixed MDIO Bus: probed [ 1.592692] CAN device driver interface [ 1.596939] pinctrl-single 4a003400.pinmux: pin 4a003818.0 already requested by 4a003400.pinmux; cannot claim for 4ae3c000.can [ 1.608401] pinctrl-single 4a003400.pinmux: pin-262 (4ae3c000.can) status -22 [ 1.615571] pinctrl-single 4a003400.pinmux: could not request pin 262 (4a003818.0) from group dcan1_pins_sleep on device pinctrl-single [ 1.627901] c_can_platform 4ae3c000.can: Error applying setting, reverse things back [ 1.636337] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=357) [ 1.696778] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 1.702903] libphy: 48485000.mdio: probed [ 1.706953] mdio_bus 48485000.mdio: /ocp/ethernet@48484000/mdio@48485000/micrel_phy_config has invalid PHY address [ 1.717366] mdio_bus 48485000.mdio: /ocp/ethernet@48484000/mdio@48485000/rmii-ref has invalid PHY address [ 1.726990] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 0 [ 1.736144] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 1 [ 1.744003] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 2 [ 1.751805] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 3 [ 1.759604] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 4 [ 1.768751] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 5 [ 1.776785] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 6 [ 1.784564] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 7 [ 1.792364] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 8 [ 1.800164] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 9 [ 1.807964] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 10 [ 1.815763] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 11 [ 1.823564] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 12 [ 1.831363] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 13 [ 1.839162] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 14 [ 1.846962] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 15 [ 1.854763] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 16 [ 1.862564] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 17 [ 1.870364] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 18 [ 1.878164] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 19 [ 1.885963] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 20 [ 1.893764] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 21 [ 1.901564] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 22 [ 1.909364] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 23 [ 1.917163] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 24 [ 1.924963] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 25 [ 1.932764] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 26 [ 1.940563] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 27 [ 1.948364] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 28 [ 1.956163] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 29 [ 1.963964] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 30 [ 1.971764] mdio_bus 48485000.mdio: scan phy micrel_phy_config at address 31 [ 1.979566] mdio_bus 48485000.mdio: scan phy rmii-ref at address 1 [ 1.986323] mdio_bus 48485000.mdio: scan phy rmii-ref at address 2 [ 1.993084] mdio_bus 48485000.mdio: scan phy rmii-ref at address 3 [ 1.999843] mdio_bus 48485000.mdio: scan phy rmii-ref at address 5 [ 2.006603] mdio_bus 48485000.mdio: scan phy rmii-ref at address 6 [ 2.013364] mdio_bus 48485000.mdio: scan phy rmii-ref at address 7 [ 2.020124] mdio_bus 48485000.mdio: scan phy rmii-ref at address 8 [ 2.026882] mdio_bus 48485000.mdio: scan phy rmii-ref at address 9 [ 2.033643] mdio_bus 48485000.mdio: scan phy rmii-ref at address 10 [ 2.040925] mdio_bus 48485000.mdio: scan phy rmii-ref at address 11 [ 2.048202] mdio_bus 48485000.mdio: scan phy rmii-ref at address 12 [ 2.055483] mdio_bus 48485000.mdio: scan phy rmii-ref at address 13 [ 2.062764] mdio_bus 48485000.mdio: scan phy rmii-ref at address 14 [ 2.070042] mdio_bus 48485000.mdio: scan phy rmii-ref at address 15 [ 2.077324] mdio_bus 48485000.mdio: scan phy rmii-ref at address 16 [ 2.084602] mdio_bus 48485000.mdio: scan phy rmii-ref at address 17 [ 2.091883] mdio_bus 48485000.mdio: scan phy rmii-ref at address 18 [ 2.099164] mdio_bus 48485000.mdio: scan phy rmii-ref at address 19 [ 2.106443] mdio_bus 48485000.mdio: scan phy rmii-ref at address 20 [ 2.113724] mdio_bus 48485000.mdio: scan phy rmii-ref at address 21 [ 2.121004] mdio_bus 48485000.mdio: scan phy rmii-ref at address 22 [ 2.128283] mdio_bus 48485000.mdio: scan phy rmii-ref at address 23 [ 2.135563] mdio_bus 48485000.mdio: scan phy rmii-ref at address 24 [ 2.142844] mdio_bus 48485000.mdio: scan phy rmii-ref at address 25 [ 2.150123] mdio_bus 48485000.mdio: scan phy rmii-ref at address 26 [ 2.157405] mdio_bus 48485000.mdio: scan phy rmii-ref at address 27 [ 2.164683] mdio_bus 48485000.mdio: scan phy rmii-ref at address 28 [ 2.171964] mdio_bus 48485000.mdio: scan phy rmii-ref at address 29 [ 2.179243] mdio_bus 48485000.mdio: scan phy rmii-ref at address 30 [ 2.186523] mdio_bus 48485000.mdio: scan phy rmii-ref at address 31 [ 2.193806] davinci_mdio 48485000.mdio: phy[0]: device 48485000.mdio:00, driver Micrel KSZ8081 or KSZ8091 [ 2.203428] davinci_mdio 48485000.mdio: phy[4]: device 48485000.mdio:04, driver Micrel KSZ8081 or KSZ8091 [ 2.213435] cpsw 48484000.ethernet: No slave[0] phy_id, phy-handle, or fixed-link property [ 2.221894] cpsw 48484000.ethernet: Detected MACID = f0:45:da:8a:80:e6 [ 2.228558] cpsw 48484000.ethernet: cpts: overflow check period 800 [ 2.236644] mousedev: PS/2 mouse device common for all mice [ 2.252882] i2c /dev entries driver [ 2.262675] Unable to handle kernel NULL pointer dereference at virtual address 000000c0 [ 2.270816] pgd = c0003000 [ 2.273535] [000000c0] *pgd=80000080004003, *pmd=00000000 [ 2.278992] Internal error: Oops: 206 [#1] PREEMPT SMP ARM [ 2.284501] Modules linked in: [ 2.287577] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.45-g0422030-dirty #7 [ 2.294830] Hardware name: Generic DRA74X (Flattened Device Tree) [ 2.300949] task: ee890000 ti: ee88c000 task.ti: ee88c000 [ 2.306376] PC is at adv76xx_probe+0xa4/0xe0c [ 2.310754] LR is at of_match_node+0x44/0x4c [ 2.315044] pc : [] lr : [] psr: 60000013 [ 2.315044] sp : ee88dd20 ip : ee88dd00 fp : ee88ddbc [ 2.326571] r10: eeb2b200 r9 : c08fa600 r8 : eeb2b220 [ 2.331817] r7 : c0495188 r6 : ffffffff r5 : 00000001 r4 : eebe3810 [ 2.338372] r3 : eeb2b200 r2 : 00000000 r1 : 00000000 r0 : 00000000 [ 2.344929] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 2.352269] Control: 30c5387d Table: 80003000 DAC: fffffffd [ 2.358038] Process swapper/0 (pid: 1, stack limit = 0xee88c210) [ 2.364071] Stack: (0xee88dd20 to 0xee88e000) [ 2.368448] dd20: ee88dd64 ee88dd30 c05107b8 c05094e4 ee88dd68 ee88dd40 fffffffe 00000000 [ 2.376662] dd40: c09e7ff8 00000000 eeb2b220 eeb2b200 c0995ce4 c06f8c98 ee88ddbc ee88dd68 [ 2.384876] dd60: c05109f8 c0510758 eeb2b200 c088e5f4 00000000 c08fa600 ee88dda4 ee88dd88 [ 2.393088] dd80: c050a498 c0509468 eedf2844 eeb2b220 eeb2b200 c06f8c98 eeb2b220 eeb2b200 [ 2.401301] dda0: c0495188 eeb2b204 c08fa600 00000000 ee88dde4 ee88ddc0 c048b518 c0495194 [ 2.409515] ddc0: c09e67dc eeb2b220 00000000 c0995ce4 00000000 c08fa600 ee88de0c ee88dde8 [ 2.417729] dde0: c03e5364 c048b3a4 eeb2b220 c0995ce4 eeb2b254 00000000 000000ad c08fa600 [ 2.425942] de00: ee88de2c ee88de10 c03e54ec c03e516c 00000000 c0995ce4 c03e5458 00000000 [ 2.434155] de20: ee88de54 ee88de30 c03e35ec c03e5464 eea0f25c eeb38bb4 eea0f270 c0995ce4 [ 2.442368] de40: ee32e700 c0995a14 ee88de64 ee88de58 c03e4c50 c03e3588 ee88de8c ee88de68 [ 2.450581] de60: c03e488c c03e4c38 c08903c8 ee88de78 c0995ce4 c0923334 c0953860 ee2ecec0 [ 2.458794] de80: ee88dea4 ee88de90 c03e5c8c c03e46f0 c0995cc8 c0923334 ee88debc ee88dea8 [ 2.467007] dea0: c048bcd4 c03e5c18 c0953860 c0923334 ee88decc ee88dec0 c0923350 c048bc98 [ 2.475221] dec0: ee88df4c ee88ded0 c000978c c0923340 ee88def4 ee88dee0 c004f084 c02bb8c0 [ 2.483433] dee0: efffc700 c06b8c64 ee88df4c ee88def8 c004f278 c004f078 ee88df34 c0831688 [ 2.491647] df00: c08316d4 c083107c 00000006 00000006 00000000 c08f704c c088a3ec 00000000 [ 2.499860] df20: 00000478 c09ab000 c09ab000 c09485e0 c093a834 000000ad c08fa600 00000007 [ 2.508074] df40: ee88df94 ee88df50 c08faf68 c0009700 00000006 00000006 00000000 c08fa600 [ 2.516287] df60: 55339555 c08f704c 55339555 c09ab000 c06810a4 00000000 00000000 00000000 [ 2.524500] df80: 00000000 00000000 ee88dfac ee88df98 c06810bc c08fada0 00000000 c06810a4 [ 2.532713] dfa0: 00000000 ee88dfb0 c000fac8 c06810b0 00000000 00000000 00000000 00000000 [ 2.540926] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.549139] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 55339555 55339555 [ 2.557347] Backtrace: [ 2.559816] [] (adv76xx_probe) from [] (i2c_device_probe+0x180/0x1fc) [ 2.568026] r10:00000000 r9:c08fa600 r8:eeb2b204 r7:c0495188 r6:eeb2b200 r5:eeb2b220 [ 2.575929] r4:c06f8c98 [ 2.578486] [] (i2c_device_probe) from [] (driver_probe_device+0x204/0x2f8) [ 2.587217] r9:c08fa600 r8:00000000 r7:c0995ce4 r6:00000000 r5:eeb2b220 r4:c09e67dc [ 2.595038] [] (driver_probe_device) from [] (__driver_attach+0x94/0x98) [ 2.603509] r9:c08fa600 r8:000000ad r7:00000000 r6:eeb2b254 r5:c0995ce4 r4:eeb2b220 [ 2.611328] [] (__driver_attach) from [] (bus_for_each_dev+0x70/0xa4) [ 2.619536] r7:00000000 r6:c03e5458 r5:c0995ce4 r4:00000000 [ 2.625254] [] (bus_for_each_dev) from [] (driver_attach+0x24/0x28) [ 2.633288] r6:c0995a14 r5:ee32e700 r4:c0995ce4 [ 2.637951] [] (driver_attach) from [] (bus_add_driver+0x1a8/0x220) [ 2.645992] [] (bus_add_driver) from [] (driver_register+0x80/0x100) [ 2.654113] r7:ee2ecec0 r6:c0953860 r5:c0923334 r4:c0995ce4 [ 2.659830] [] (driver_register) from [] (i2c_register_driver+0x48/0x88) [ 2.668301] r5:c0923334 r4:c0995cc8 [ 2.671909] [] (i2c_register_driver) from [] (adv76xx_driver_init+0x1c/0x20) [ 2.680729] r5:c0923334 r4:c0953860 [ 2.684338] [] (adv76xx_driver_init) from [] (do_one_initcall+0x98/0x1e4) [ 2.692902] [] (do_one_initcall) from [] (kernel_init_freeable+0x1d4/0x268) [ 2.701636] r10:00000007 r9:c08fa600 r8:000000ad r7:c093a834 r6:c09485e0 r5:c09ab000 [ 2.709538] r4:c09ab000 [ 2.712091] [] (kernel_init_freeable) from [] (kernel_init+0x18/0xf4) [ 2.720299] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c06810a4 [ 2.728203] r4:c09ab000 [ 2.730757] [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) [ 2.738355] r5:c06810a4 r4:00000000 [ 2.741963] Code: e59f0d58 eb01d375 e594338c e3a01000 (e59020c0) [ 2.748676] ---[ end trace 27e9a5f828a2d79c ]--- [ 2.753329] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.753329] [ 2.762509] CPU1: stopping [ 2.765231] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.4.45-g0422030-dirty #7 [ 2.773705] Hardware name: Generic DRA74X (Flattened Device Tree) [ 2.779823] Backtrace: [ 2.782297] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [ 2.789896] r7:ee8b7f40 r6:20000193 r5:00000000 r4:c097af8c [ 2.795619] [] (show_stack) from [] (dump_stack+0x8c/0xa0) [ 2.802876] [] (dump_stack) from [] (handle_IPI+0x184/0x198) [ 2.810300] r7:ee8b7f40 r6:00000000 r5:00000001 r4:c094a424 [ 2.816019] [] (handle_IPI) from [] (gic_handle_irq+0x78/0x7c) [ 2.823617] r7:fa212000 r6:ee8b7f40 r5:fa21200c r4:c09508dc [ 2.829332] [] (gic_handle_irq) from [] (__irq_svc+0x40/0x74) [ 2.836846] Exception stack(0xee8b7f40 to 0xee8b7f88) [ 2.841921] 7f40: 00000001 00000000 00000000 c0020560 ee8b6000 c09504ac 00000000 00000000 [ 2.850134] 7f60: ee8b7fb0 c068a21c c095050c ee8b7f9c ee8b7fa0 ee8b7f90 c0010554 c0010558 [ 2.858345] 7f80: 60000013 ffffffff [ 2.861843] r9:c068a21c r8:ee8b7fb0 r7:ee8b7f74 r6:ffffffff r5:60000013 r4:c0010558 [ 2.869668] [] (arch_cpu_idle) from [] (default_idle_call+0x28/0x34) [ 2.877799] [] (default_idle_call) from [] (cpu_startup_entry+0x200/0x260) [ 2.886452] [] (cpu_startup_entry) from [] (secondary_start_kernel+0x16c/0x178) [ 2.895532] r7:c09ab2a8 [ 2.898087] [] (secondary_start_kernel) from [<8000956c>] (0x8000956c) [ 2.905511] r7:c09ab2a8 r6:30c0387d r5:00000000 r4:ae843cc0 [ 2.911227] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.911227]