U-Boot SPL 2019.01-g333c3e72d3 (Apr 20 2020 - 05:11:06 +0000) Trying to boot from MMC1 SPL: Please implement spl_start_uboot() for your board SPL: Direct Linux boot not active! U-Boot 2019.01-g333c3e72d3 (Apr 20 2020 - 05:11:06 +0000) CPU : AM437X-GP rev 1.2 Model: TI AM437x GP EVM DRAM: 2 GiB PMIC: TPS65218 NAND: 512 MiB MMC: OMAP SD/MMC: 0 Loading Environment from FAT... OK Net: eth0: ethernet@4a100000 Hit any key to stop autoboot: 0 ethernet@4a100000 Waiting for PHY auto negotiation to complete........ done link up on port 0, speed 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.0.13 (1328 ms) link up on port 0, speed 1000, full duplex Using ethernet@4a100000 device File transfer via NFS from server 192.168.0.1; our IP address is 192.168.0.13 Filename '/home/local/work/harddrive2/psdk_linux/am437x/nightly/e2e/targetnfs/boot/zImage'. Load address: 0x82000000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4297216 (419200 hex) link up on port 0, speed 1000, full duplex Using ethernet@4a100000 device File transfer via NFS from server 192.168.0.1; our IP address is 192.168.0.13 Filename '/home/local/work/harddrive2/psdk_linux/am437x/nightly/e2e/targetnfs/boot/am437x-gp-evm-hdmi.dtb'. Load address: 0x88000000 Loading: ########### done Bytes transferred = 52827 (ce5b hex) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8fff0000, end 8ffffe5a ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.94-gbe5389fd85 (oe-user@oe-host) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #1 PREEMPT Sun Apr 19 03:20:57 UTC 2020 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM437x GP EVM [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 48 MiB at 0xfcc00000 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM437x ES1.2 (sgx neon) [ 0.000000] random: get_random_bytes called from start_kernel+0xa4/0x434 with crng_init=0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522559 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/nfs nfsroot=192.168.0.1:/home/local/work/harddrive2/psdk_linux/am437x/nightly/e2e/targetnfs,nolock,v3 rw ip=dhcp [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2014636K/2097148K available (9216K kernel code, 316K rwdata, 2736K rodata, 1024K init, 254K bss, 33360K reserved, 49152K cma-reserved, 1261564K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 317 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 255 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C: platform modifies aux control register: 0x0e030000 -> 0x3e430000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e030000 -> 0x3e430000 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] OMAP L2C310: ROM does not support power control setting [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c9, AUX_CTRL 0x4e430000 [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000013] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000030] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000038] OMAP clocksource: timer1 at 24000000 Hz [ 0.000431] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000441] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000845] Console: colour dummy device 80x30 [ 0.000872] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.000878] This ensures that you still see kernel messages. Please [ 0.000882] update your kernel commandline. [ 0.000925] Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896) [ 0.060188] pid_max: default: 32768 minimum: 301 [ 0.060372] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.060397] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.061148] CPU: Testing write buffer coherency: ok [ 0.061203] CPU0: Spectre v2: using BPIALL workaround [ 0.062089] Setting up static identity map for 0x80100000 - 0x80100060 [ 0.062237] rcu: Hierarchical SRCU implementation. [ 0.062573] EFI services will not be available. [ 0.063647] devtmpfs: initialized [ 0.072767] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.073152] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.073173] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.076308] pinctrl core: initialized pinctrl subsystem [ 0.077016] DMI not present or invalid. [ 0.077446] NET: Registered protocol family 16 [ 0.079114] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.152618] cpuidle: using governor ladder [ 0.152655] cpuidle: using governor menu [ 0.159690] OMAP GPIO hardware version 0.1 [ 0.168951] No ATAGs? [ 0.168972] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.168991] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.182532] edma 49000000.edma: TI EDMA DMA engine driver [ 0.186456] SCSI subsystem initialized [ 0.186955] media: Linux media interface: v0.10 [ 0.186995] videodev: Linux video capture interface: v2.00 [ 0.187109] pps_core: LinuxPPS API ver. 1 registered [ 0.187119] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.187138] PTP clock support registered [ 0.187171] EDAC MC: Ver: 3.0.0 [ 0.188173] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 0.188807] Advanced Linux Sound Architecture Driver Initialized. [ 0.189901] clocksource: Switched to clocksource timer1 [ 0.197398] NET: Registered protocol family 2 [ 0.198146] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) [ 0.198181] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.198241] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.198314] TCP: Hash tables configured (established 8192 bind 8192) [ 0.198488] UDP hash table entries: 512 (order: 1, 8192 bytes) [ 0.198512] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) [ 0.198648] NET: Registered protocol family 1 [ 0.199203] RPC: Registered named UNIX socket transport module. [ 0.199216] RPC: Registered udp transport module. [ 0.199221] RPC: Registered tcp transport module. [ 0.199227] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.201147] Initialise system trusted keyrings [ 0.201451] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 0.205532] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.206236] NFS: Registering the id_resolver key type [ 0.206276] Key type id_resolver registered [ 0.206282] Key type id_legacy registered [ 0.206323] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.208552] Key type asymmetric registered [ 0.208569] Asymmetric key parser 'x509' registered [ 0.208631] bounce: pool size: 64 pages [ 0.208694] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.208705] io scheduler noop registered [ 0.208712] io scheduler deadline registered [ 0.208934] io scheduler cfq registered (default) [ 0.208945] io scheduler mq-deadline registered [ 0.208953] io scheduler kyber registered [ 0.211834] pinctrl-single 44e10800.pinmux: 199 pins, size 796 [ 0.257888] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 0.261196] omap8250 44e09000.serial: No clock speed specified: using default: 48000000 [ 0.261909] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 31, base_baud = 3000000) is a 8250 [ 0.941903] console [ttyS0] enabled [ 0.946018] omap8250 481a6000.serial: No clock speed specified: using default: 48000000 [ 0.954795] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 32, base_baud = 3000000) is a 8250 [ 0.965534] omap_rng 48310000.rng: Random Number Generator ver. 20 [ 0.971978] random: fast init done [ 0.975597] random: crng init done [ 0.980936] omapdss_dss 4832a000.dss: 4832a000.dss supply vdda_video not found, using dummy regulator [ 0.990440] omapdss_dss 4832a000.dss: Linked as a consumer to regulator.0 [ 0.997367] omapdss_dss 4832a000.dss: Dropping the link to regulator.0 [ 1.017772] brd: module loaded [ 1.029571] loop: module loaded [ 1.035868] libphy: Fixed MDIO Bus: probed [ 1.109966] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 1.117667] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.124945] libphy: 4a101000.mdio: probed [ 1.128989] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver Micrel KSZ9031 Gigabit PHY [ 1.139651] cpsw 4a100000.ethernet: Detected MACID = 34:b1:f7:3d:bc:27 [ 1.146441] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 [ 1.152908] cpsw 4a100000.ethernet: ALE Table size 1024 [ 1.158191] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) [ 1.166753] i2c /dev entries driver [ 1.172369] cpuidle: enable-method property 'ti,am4372' found operations [ 1.179544] sdhci: Secure Digital Host Controller Interface driver [ 1.185855] sdhci: Copyright(c) Pierre Ossman [ 1.191667] omap_hsmmc 47810000.mmc: Linked as a consumer to regulator.2 [ 1.222981] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.229591] ledtrig-cpu: registered to indicate activity on CPUs [ 1.240962] NET: Registered protocol family 10 [ 1.246743] Segment Routing with IPv6 [ 1.250653] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.257449] NET: Registered protocol family 17 [ 1.262371] Key type dns_resolver registered [ 1.266916] omap_voltage_late_init: Voltage driver support not added [ 1.274246] Loading compiled-in X.509 certificates [ 1.290049] GPIO line 119 (SelEMMCorNAND) hogged as output/low [ 1.296767] GPIO line 136 (SelLCDorHDMI) hogged as output/low [ 1.303276] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 1.308445] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 1.316035] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xdc [ 1.322475] nand: Micron MT29F4G08ABAEAWP [ 1.326504] nand: 512 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 224 [ 1.334277] Using OMAP_ECC_BCH16_CODE_HW ECC scheme [ 1.339274] 10 fixed-partitions partitions found on MTD device omap2-nand.0 [ 1.346288] Creating 10 MTD partitions on "omap2-nand.0": [ 1.351725] 0x000000000000-0x000000040000 : "NAND.SPL" [ 1.357839] 0x000000040000-0x000000080000 : "NAND.SPL.backup1" [ 1.364580] 0x000000080000-0x0000000c0000 : "NAND.SPL.backup2" [ 1.371267] 0x0000000c0000-0x000000100000 : "NAND.SPL.backup3" [ 1.377870] 0x000000100000-0x000000180000 : "NAND.u-boot-spl-os" [ 1.384779] 0x000000180000-0x000000280000 : "NAND.u-boot" [ 1.391103] 0x000000280000-0x0000002c0000 : "NAND.u-boot-env" [ 1.397617] 0x0000002c0000-0x000000300000 : "NAND.u-boot-env.backup1" [ 1.404902] 0x000000300000-0x000000a00000 : "NAND.kernel" [ 1.412040] 0x000000a00000-0x000020000000 : "NAND.file-system" [ 1.525920] omap_i2c 44e0b000.i2c: bus 0 rev0.12 at 100 kHz [ 1.563155] i2c i2c-1: Added multiplexed i2c bus 3 [ 1.568055] omap_i2c 4802a000.i2c: bus 1 rev0.12 at 100 kHz [ 1.574270] omapdss_dss 4832a000.dss: 4832a000.dss supply vdda_video not found, using dummy regulator [ 1.583670] omapdss_dss 4832a000.dss: Linked as a consumer to regulator.0 [ 1.590601] DSS: OMAP DSS rev 2.0 [ 1.594958] omapdss_dss 4832a000.dss: bound 4832a400.dispc (ops dispc_component_ops) [ 1.603315] omapdrm omapdrm.0: DMM not available, disable DMM support [ 1.610116] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.616762] [drm] No driver support for vblank timestamp query. [ 1.683401] Console: switching to colour frame buffer device 160x45 [ 1.699570] omapdrm omapdrm.0: fb0: omapdrm frame buffer device [ 1.706279] [drm] Initialized omapdrm 1.0.0 20110917 for omapdrm.0 on minor 0 [ 1.713979] cpu cpu0: Linked as a consumer to regulator.5 [ 1.719455] cpu cpu0: Dropping the link to regulator.5 [ 1.724866] cpu cpu0: Linked as a consumer to regulator.5 [ 1.731713] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) [ 1.740581] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.745674] omap_hsmmc 48060000.mmc: Linked as a consumer to regulator.1 [ 1.779874] hctosys: unable to open rtc device (rtc0) [ 1.803252] net eth0: initializing cpsw version 1.15 (0) [ 1.863711] mmc1: host does not support reading read-only switch, assuming write-enable [ 1.874169] mmc1: new high speed SDHC card at address e624 [ 1.881138] mmcblk1: mmc1:e624 SU04G 3.69 GiB [ 1.889811] mmcblk1: p1 p2 [ 1.914248] Micrel KSZ9031 Gigabit PHY 4a101000.mdio:00: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) [ 1.932244] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.051653] cpsw 4a100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 5.079975] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 5.110047] Sending DHCP requests ., OK [ 5.153943] IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.13 [ 5.161996] IP-Config: Complete: [ 5.165394] device=eth0, hwaddr=34:b1:f7:3d:bc:27, ipaddr=192.168.0.13, mask=255.255.255.0, gw=192.168.0.1 [ 5.175737] host=192.168.0.13, domain=linux_box.internal.ti.com, nis-domain=(none) [ 5.183955] bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath= [ 5.183967] nameserver0=8.8.8.8, nameserver1=8.8.4.4 [ 5.197191] ALSA device list: [ 5.200409] No soundcards found. [ 5.211126] VFS: Mounted root (nfs filesystem) on device 0:15. [ 5.217421] devtmpfs: mounted [ 5.222398] Freeing unused kernel memory: 1024K [ 5.227089] Run /sbin/init as init process [ 6.184673] systemd[1]: System time before build time, advancing clock. [ 6.446415] systemd[1]: systemd 244.3+ running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD ) [ 6.469664] systemd[1]: Detected architecture arm. Welcome to Arago 2020.05! [ 6.548888] systemd[1]: Set hostname to . [ 9.045648] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 9.058249] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 9.071436] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 9.115388] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 9.152118] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 9.191435] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password ��…ts to Console Directory Watch. [ 9.231346] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R��…uests to Wall Directory Watch. [ 9.272128] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 9.300369] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 9.341097] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 9.370438] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 9.462760] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 9.501049] systemd[1]: Reached target RPC Port Mapper. [ OK ] Reached target RPC Port Mapper. [ 9.555433] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 9.590839] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 9.838549] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 9.849136] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 9.892386] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 9.924259] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 9.962484] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 10.001707] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 10.042263] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 10.059812] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 10.124946] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 10.212133] systemd[1]: Mounting Temporary Directory (/tmp)... Mounting Temporary Directory (/tmp)... [ 10.230622] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped. [ 10.260284] systemd[1]: Starting Start psplash boot splash screen... Starting Start psplash boot splash screen... [ 10.493463] systemd[1]: Started Hardware RNG Entropy Gatherer Daemon. [ OK ] Started Hardware RNG Entropy Gatherer Daemon. [ 10.673124] systemd[1]: Starting RPC Bind... Starting RPC Bind... [ 10.685373] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 10.728240] systemd[1]: Starting Journal Service... Starting Journal Service... [ 10.865097] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 10.936604] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 11.046611] systemd[1]: Starting udev Coldplug all Devices... [ 11.072411] cmemk: loading out-of-tree module taints kernel. [ 11.110152] CMEMK module: reference Linux version 4.19.94 Starting udev Coldplug all Devices... [ 11.135937] systemd[1]: Started Start psplash boot splash screen. [ 11.142421] no physical memory specified [ 11.199485] cmemk initialized [ OK ] Started Start psplash boot splash screen. [ 11.235588] systemd[1]: Mounted POSIX Message Queue File System. [ 11.270448] cryptodev: driver 1.9 loaded. [ OK ] Mounted POSIX Message Queue File System. [ 11.311191] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. [ 11.346943] systemd[1]: Mounted Temporary Directory (/tmp). [ OK ] Mounted Temporary Directory (/tmp). [ 11.414120] systemd[1]: Started Load Kernel Modules. [ OK ] Started Load Kernel Modules. [ 11.451452] systemd[1]: Started Remount Root and Kernel File Systems. [ OK ] Started Remount Root and Kernel File Systems. [ 11.482040] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 11.536514] systemd[1]: Mounting Kernel Configuration File System... Mounting Kernel Configuration File System... [ 11.644654] systemd[1]: Started Start psplash-systemd progress communication helper. [ OK ] Started Start psplash-syst��…progress communication helper. [ 11.751040] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 11.781440] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 11.830762] systemd[1]: Condition check resulted in Create System Users being skipped. [ 11.866571] systemd[1]: Starting Create Static Device Nodes in /dev... Starting Create Static Device Nodes in /dev... [ 11.923349] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Mounted Kernel Configuration File System. Starting Flush Journal to Persistent Storage... [ OK ] Started Apply Kernel Variables. [ 12.242514] systemd-journald[85]: Received client request to flush runtime journal. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... Starting udev Kernel Device Manager... [ OK ] Mounted /media/ram. [ OK ] Mounted /var/volatile. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Started Load/Save Random Seed. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started udev Coldplug all Devices. [ ***] (1 of 2) A start job is running for��…e Synchronization (20s / 1min 34s) [ 29.929957] nfs: server 192.168.0.1 not responding, still trying [ **] (1 of 2) A start job is running for��…e Synchronization (21s / 1min 34s) [ 30.688408] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ *] (2 of 2) A start job is running for RPC Bind (22s / 1min 31s) [ 31.221970] remoteproc remoteproc0: wkup_m3 is available [ 31.639042] remoteproc remoteproc0: powering up wkup_m3 [ **] (2 of 2) A start job is running for[ 31.669720] ov2659 0-0030: Sensor detection failed (3030, 0) RPC Bind (22s / 1min 31s) [ 31.831093] pixcir_ts 1-005c: Failed to set IDLE mode [ 31.861289] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 243232 [ 31.880303] ov2659 1-0030: Found OV2656 sensor [ 31.940311] pixcir_ts: probe of 1-005c failed with error -121 [ 31.960613] remoteproc remoteproc0: remote processor wkup_m3 is now up [ 31.967209] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192 [ ***] (2 of 2) A start job is running for RPC Bind (23s / 1min 31s) [ 32.293761] CAN device driver interface [ 32.425016] c_can_platform 481cc000.can: c_can_platform device registered (regs=01f0cd87, irq=61) [*** ] (1 of 2) A start job is running for��…e Synchronization (24s / 1min 34s) [ 33.944523] omap-sham 53100000.sham: hw accel on OMAP rev 0.0 [ 34.034853] omap-aes 53501000.aes: OMAP AES hw accel rev: 0.1 [ 34.056796] omap-des 53701000.des: OMAP DES hw accel rev: 0.33 [ 34.139056] omap-aes 53501000.aes: will run requests pump with realtime priority [** ] (2 of 2) A start job is running for RPC Bind (25s / 1min 31s) [ 34.252017] [drm] Initialized pvr 1.17.4948957 20110701 for 56000000.sgx on minor 1 [** ] (2 of 2) A start job is running for RPC Bind (26s / 1min 31s) [ OK ] Created slice system-weston.slice. [ 36.581565] asoc-simple-card sound@1: i2s-hifi <-> 4803c000.mcasp mapping ok [ 36.588687] asoc-simple-card sound@1: ASoC: no DMI vendor name! [ ***] (2 of 2) A start job is running for RPC Bind (33s / 1min 31s) [ 43.258977] dwc3 48390000.usb: Failed to get clk 'ref': -2 [ **] (2 of 2) A start job is running for RPC Bind (34s / 1min 31s) [ 43.529682] dwc3 483d0000.usb: Failed to get clk 'ref': -2 [ 43.789022] remoteproc remoteproc1: 54434000.pru is available [ *] (2 of 2) A start job is running for RPC Bind[ 44.051105] remoteproc remoteproc2: 54438000.pru is available (35s / 1min 31s) [ 44.110055] pru-rproc 54438000.pru: PRU rproc node pru@54438000 probed successfully [ 44.161659] remoteproc remoteproc3: 54474000.pru is available [ 44.188196] pru-rproc 54474000.pru: PRU rproc node pru@54474000 probed successfully [ 44.212182] usbcore: registered new interface driver usbfs [ 44.240277] usbcore: registered new interface driver hub [ 44.250609] remoteproc remoteproc4: 54478000.pru is available [ 44.256498] pru-rproc 54478000.pru: PRU rproc node pru@54478000 probed successfully [ 44.282323] usbcore: registered new device driver usb [ 44.393941] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [ 44.399509] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 1 [ **] (1 of 2) A start job is running for��…ime Synchronization (9s / 1min 8s) [ 44.560569] xhci-hcd xhci-hcd.5.auto: irq 110, io mem 0x483d0000 [ 44.590160] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 44.598479] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 44.630000] usb usb1: Product: xHCI Host Controller [ 44.634916] usb usb1: Manufacturer: Linux 4.19.94-gbe5389fd85 xhci-hcd [ 44.679998] usb usb1: SerialNumber: xhci-hcd.5.auto [ 44.687009] hub 1-0:1.0: USB hub found [ 44.710038] hub 1-0:1.0: 1 port detected [ 44.723439] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [ 44.728983] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 2 [ 44.759997] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed [ 44.790207] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 44.820185] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 44.828506] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 44.860040] usb usb2: Product: xHCI Host Controller [ 44.864956] usb usb2: Manufacturer: Linux 4.19.94-gbe5389fd85 xhci-hcd [ 44.900003] usb usb2: SerialNumber: xhci-hcd.5.auto [ ***] (1 of 2) A start job is [ 44.921621] hub 2-0:1.0: 1 port detected running for��…ime Synchronization (9s / 1min 8s) [ 45.089978] usb 1-1: new low-speed USB device number 2 using xhci-hcd [ 45.307728] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ *** ] (1 of 2) A start job is running for��…me Synchronization (10s / 1min 8s) [ 45.340087] usb 1-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM) [ 45.347009] usb 1-1: Manufacturer: Microsoft [ 45.631312] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/platform/44000000.ocp/483c0000.omap_dwc3/483d0000.usb/xhci-hcd.5.auto/usb1/1-1/1-1:1.0/0003:045E:0040.0001/input/i2 [ *** ] (2 of 2) A start job is running for RPC Bind (36s / 1min 31s) [ 45.743120] usbcore: registered new interface driver usbhid [ OK ] Created slice system-systemd\x2dfsck.slice. [ OK ] Listening on Load/Save RF ��…itch Status /dev/rfkill Watch. Starting File System Check on /dev/mmcblk1p1... Starting File System Check on /dev/mmcblk1p2... [ OK ] Started File System Check on /dev/mmcblk1p2. Mounting /run/media/mmcblk1p2... [ OK ] Started File System Check on /dev/mmcblk1p1. [ 49.130174] EXT4-fs (mmcblk1p2): mounting ext3 file system using the ext4 subsystem Mounting /run/media/mmcblk1p1... [ 49.205524] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Mounted /run/media/mmcblk1p2. [ OK ] Mounted /run/media/mmcblk1p1. [*** ] (1 of 2) A start job is running for��…k Time Synchronization (17s / 55s) [ 65.770051] nfs: server 192.168.0.1 not responding, still trying [ OK ] Started RPC Bind. [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ OK ] Stopped Network Time Synchronization. Starting Network Time Synchronization... [ *** ] A start job is running for Network ��…me Synchronization (8s / 1min 30s) [ ***] A start job is running for Network ��…e Synchronization (11s / 1min 30s) [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target System Time Set. [ OK ] Reached target System Time Synchronized. [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on dropbear.socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Save/Restore Sound Card State... [ OK ] Started Job spooling tools. [ OK ] Started Periodic Command Scheduler. [ OK ] Started D-Bus System Message Bus. Starting Print notice about GPLv3 packages... Starting IPv6 Packet Filtering Framework... Starting IPv4 Packet Filtering Framework... Starting Reboot and dump vmcore via kexec... Starting rc.pvr.service... Starting Login Service... [ OK ] Started Save/Restore Sound Card State. [ OK ] Started IPv6 Packet Filtering Framework. [ OK ] Started IPv4 Packet Filtering Framework. [ OK ] Started Reboot and dump vmcore via kexec. [ OK ] Reached target Network (Pre). [ OK ] Reached target Sound Card. Starting Network Service... [ 118.017024] PVR_K: UM DDK-(4948957) and KM DDK-(4948957) match. [ OK ] [ 127.370045] nfs: server 192.168.0.1 not responding, still trying [ 163.050047] nfs: server 192.168.0.1 not responding, still trying [ 168.250102] nfs: server 192.168.0.1 OK *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: bash-dev bash bc binutils cifs-utils coreutils-stdbuf coreutils cpio dosfstools elfutils gawk gdb gdbserver glmark2 gstreamer1.0-libav gzip less libasm1 libbfd libdw1 libelf1 libgdbm-compat4 libgdbm-dev libgdbm6 libgmp10 libidn2-0 libreadline-dev libreadline8 libunistring2 m4-dev m4 nettle pdm-anomaly-detection tar which If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Network Service. [ OK ] Started Print notice about GPLv3 packages. [ OK ] Started rc.pvr.service. Starting Wait for Network to be Configured... Starting Network Name Resolution... Starting weston.service... [ OK ] Started Wait for Network to be Configured. [ 218.120189] nfs: server 192.168.0.1 OK [ OK ] Started Login Service. [ OK ] Started weston.service. Starting Matrix GUI... Starting telnetd.service... [ OK ] Started telnetd.service. [ OK ] Started Matrix GUI. [ 225.300237] nfs: server 192.168.0.1 not responding, still trying [ 229.713791] cryptd: max_cpu_qlen set to 1000 [ *] A start job is running for Network ��…e Resolution (4min 18s / 4min 50s) [ OK ] Started Network Name Resolution. [ OK ] Reached target Network. [ OK ] Reached target Network is Online. [ OK ] Reached target Host and Network Name Lookups. Starting Avahi mDNS/DNS-SD Stack... Starting Enable and configure wl18xx bluetooth stack... Starting Lighttpd Daemon... Starting LSB: network benchmark... [ OK ] Started NFS status monitor for NFSv2/3 locking.. [ OK ] Started strongSwan IPsec I��…IKEv2 daemon using ipsec.conf. Starting Permit User Sessions... [ OK ] Started LSB: network benchmark. Starting parse-ip.service... Starting thermal-zone-init.service... [ OK ] Started Permit User Sessions. [ OK ] Started parse-ip.service. [ OK ] Started thermal-zone-init.service. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... [ OK ] Started Weston Wayland Compositor. [ OK ] Started Lighttpd Daemon. [ OK ] Started Synchronize System and HW clocks. [ OK ] Started Enable and configure wl18xx bluetooth stack. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am437x-evm ttyS0 Arago 2020.05 am437x-evm ttyS0 am437x-evm login: [ 276.713286] Initializing XFRM netlink socket am437x-evm login: root