U-Boot SPL 2017.01-00360-gc6c77f9-dirty (Dec 27 2017 - 09:56:15) Trying to boot from MMC1 ** First descriptor is NOT a primary desc on 1:1 ** reading u-boot.img reading u-boot.img U-Boot 2017.01-00360-gc6c77f9-dirty (Dec 27 2017 - 09:56:15 +0900) CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 ** First descriptor is NOT a primary desc on 1:1 ** Net: cpsw, usb_ether Press SPACE to abort autoboot in 2 seconds switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 3585008 bytes read in 303 ms (11.3 MiB/s) 35464 bytes read in 23 ms (1.5 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8fff4000, end 8ffffa87 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.41-ge3a80a1c5c (root@yjkim-Ubuntu16) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #185 PREEMPT Wed Dec 27 11:17:32 KST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt:Machine model: TI AM335x AIM [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 48 MiB at 0x9d000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=PARTUUID=7a7f930d-02 rw rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 457992K/524288K available (7168K kernel code, 273K rwdata, 2344K rodata, 1024K init, 280K bss, 17144K reserved, 49152K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB) [ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB) [ 0.000000] .data : 0xc0c00000 - 0xc0c44710 ( 274 kB) [ 0.000000] .bss : 0xc0c44710 - 0xc0c8a974 ( 281 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 25000000 Hz [ 0.000014] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns [ 0.000031] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns [ 0.000040] OMAP clocksource: timer1 at 25000000 Hz [ 0.000168] clocksource_probe: no matching clocksources found [ 0.000321] Console: colour dummy device 80x30 [ 0.000344] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.000350] This ensures that you still see kernel messages. Please [ 0.000354] update your kernel commandline. [ 0.000375] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) [ 0.089269] pid_max: default: 32768 minimum: 301 [ 0.089387] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.089397] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090106] CPU: Testing write buffer coherency: ok [ 0.090441] Setting up static identity map for 0x80100000 - 0x80100060 [ 0.091182] EFI services will not be available. [ 0.092339] devtmpfs: initialized [ 0.101512] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.101845] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.101870] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.105148] pinctrl core: initialized pinctrl subsystem [ 0.106287] NET: Registered protocol family 16 [ 0.107932] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.120361] omap_hwmod: debugss: _wait_target_disable failed [ 0.199262] cpuidle: using governor ladder [ 0.229249] cpuidle: using governor menu [ 0.234457] OMAP GPIO hardware version 0.1 [ 0.247084] No ATAGs? [ 0.247108] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.286405] edma 49000000.edma: TI EDMA DMA engine driver [ 0.289145] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe [ 0.289410] media: Linux media interface: v0.10 [ 0.289463] Linux video capture interface: v2.00 [ 0.289500] pps_core: LinuxPPS API ver. 1 registered [ 0.289506] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.289527] PTP clock support registered [ 0.289569] EDAC MC: Ver: 3.0.0 [ 0.290527] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 0.290812] Advanced Linux Sound Architecture Driver Initialized. [ 0.291909] clocksource: Switched to clocksource timer1 [ 0.300891] NET: Registered protocol family 2 [ 0.301596] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.301639] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.301677] TCP: Hash tables configured (established 4096 bind 4096) [ 0.301741] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.301757] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.301879] NET: Registered protocol family 1 [ 0.302325] RPC: Registered named UNIX socket transport module. [ 0.302336] RPC: Registered udp transport module. [ 0.302342] RPC: Registered tcp transport module. [ 0.302347] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.303154] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 0.305225] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.311800] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.312828] NFS: Registering the id_resolver key type [ 0.312869] Key type id_resolver registered [ 0.312875] Key type id_legacy registered [ 0.312915] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.314568] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.314585] io scheduler noop registered [ 0.314591] io scheduler deadline registered [ 0.314718] io scheduler cfq registered (default) [ 0.315869] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.369539] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.372962] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250 [ 0.953839] console [ttyS0] enabled [ 0.958364] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, base_baud = 3000000) is a 8250 [ 0.968774] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 [ 0.975614] [drm] Initialized [ 0.990630] brd: module loaded [ 0.999417] loop: module loaded [ 1.004416] libphy: Fixed MDIO Bus: probed [ 1.081987] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.088126] libphy: 4a101000.mdio: probed [ 1.093605] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver TI DP83867 [ 1.102006] davinci_mdio 4a101000.mdio: phy[13]: device 4a101000.mdio:0d, driver TI DP83867 [ 1.111048] cpsw 4a100000.ethernet: Detected MACID = 98:5d:ad:48:b5:d1 [ 1.117814] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) [ 1.126133] cpsw 4a100000.ethernet: cpsw: Detected MACID = 98:5d:ad:48:b5:d3 [ 1.134608] mousedev: PS/2 mouse device common for all mice [ 1.140536] i2c /dev entries driver [ 1.145712] cpuidle: enable-method property 'ti,am3352' found operations [ 1.153418] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.272415] ledtrig-cpu: registered to indicate activity on CPUs [ 1.283889] NET: Registered protocol family 10 [ 1.289752] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.296706] NET: Registered protocol family 17 [ 1.301473] Key type dns_resolver registered [ 1.306118] omap_voltage_late_init: Voltage driver support not added [ 1.323292] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.334428] mmc0: new high speed SDHC card at address aaaa [ 1.340559] mmcblk0: mmc0:aaaa SU04G 3.69 GiB [ 1.346875] mmcblk0: p1 p2 [ 1.355271] random: fast init done [ 1.362850] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.368829] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.375703] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.383495] hctosys: unable to open rtc device (rtc0) [ 1.389141] ALSA device list: [ 1.392373] mmc1: new high speed MMC card at address 0001 [ 1.398280] No soundcards found. [ 1.402226] mmcblk1: mmc1:0001 W52516 14.6 GiB [ 1.407032] mmcblk1boot0: mmc1:0001 W52516 partition 1 4.00 MiB [ 1.413624] mmcblk1boot1: mmc1:0001 W52516 partition 2 4.00 MiB [ 1.452046] EXT4-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended [ 1.462943] EXT4-fs (mmcblk0p2): recovery complete [ 1.469328] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.477580] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.486397] devtmpfs: mounted [ 1.490851] Freeing unused kernel memory: 1024K (c0b00000 - c0c00000) [ 1.752373] systemd[1]: System time before build time, advancing clock. [ 1.825084] systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 1.844034] systemd[1]: Detected architecture arm. Welcome to Arago 2017.06! [ 1.883421] systemd[1]: Set hostname to . [ 2.378031] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 2.416143] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 2.452497] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 2.492178] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 2.522244] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 2.576155] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 2.620423] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ OK ] Listening on Network Service Netlink Socket. [ OK ] Listening on udev Kernel Socket. [ OK ] Listening on udev Control Socket. [ OK ] Listening on Journal Socket. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Paths. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Created slice System Slice. Starting Journal Service... Mounting Temporary Directory... Starting Load Kernel Modules... Mounting Debug File System... Mounting POSIX Message Queue File System... [ OK ] Reached target Slices. [ 3.183663] cryptodev: loading out-of-tree module taints kernel. [ 3.190654] cryptodev: disagrees about version of symbol crypto_alloc_aead [ OK ] Created slice system-serial\x2dgetty.slice. [ 3.229718] cryptodev: Unknown symbol crypto_alloc_aead (err -22) [ 3.255980] cryptodev: disagrees about version of symbol crypto_aead_setauthsize [ 3.255990] cryptodev: Unknown symbol crypto_aead_setauthsize (err -22) [ 3.256057] cryptodev: disagrees about version of symbol crypto_aead_setkey [ 3.256061] cryptodev: Unknown symbol crypto_aead_setkey (err -22) [ 3.256205] cryptodev: disagrees about version of symbol crypto_alloc_skcipher [ 3.256209] cryptodev: Unknown symbol crypto_alloc_skcipher (err -22) Starting Setup Virtual Console... [ OK ] Created slice system-getty.slice. Starting Create list of required st... nodes for the current kernel... Starting Remount Root and Kernel File Systems... [ OK ] Mounted Debug File System. [ 3.478535] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Temporary Directory. [ OK ] Started Journal Service. [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ OK ] Started Setup Virtual Console. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Starting Create Static Device Nodes in /dev... Mounting Configuration File System... Starting Apply Kernel Variables... Starting Flush Journal to Persistent Storage... [ OK ] Mounted Configuration File System. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Apply Kernel Variables. [ 4.155815] systemd-journald[89]: Received request to flush runtime journal from PID 1 Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /var/volatile... Mounting /media/ram... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Flush Journal to Persistent Storage. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Started Load/Save Random Seed. [ OK ] Started Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ 5.550377] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ OK ] Found device /dev/ttyS0. [ 5.602939] ti_am3359-tscadc 44e0d000.tscadc: Need atleast one channel. [ OK ] Started udev Coldplug all Devices. [ 5.714531] ti_am3359-tscadc: probe of 44e0d000.tscadc failed with error -22 [ OK ] Reached target System Initialization. [ 5.824826] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started System Logging Service. Starting telnetd.service... [ OK ] Started Kernel Logging Service. [ OK ] Started D-Bus System Message Bus. [ 6.484863] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 6.570065] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 6.604633] PM: Cannot get wkup_m3_ipc handle [ 6.713438] remoteproc remoteproc0: wkup_m3 is available [ 6.716695] PM: Cannot get wkup_m3_ipc handle [ 6.716763] remoteproc remoteproc0: powering up wkup_m3 [ 6.740828] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 224344 [ 6.741096] remoteproc remoteproc0: remote processor wkup_m3 is now up [ 6.741124] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192 [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. Starting Login Service... Starting Network Service... [ 7.288473] PM: bootloader does not support rtc-only! [ 7.293917] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 7.322105] omap-aes 53500000.aes: will run requests pump with realtime priority Starting Print notice about GPLv3 packages... [ OK ] Started telnetd.service. [ OK ] Found device /dev/ttyS3. [ OK ] Started Network Service. [ 8.355177] net eth1: initializing cpsw version 1.12 (0) [ 8.422161] net eth0: initialized cpsw ale version 1.4 [ 8.427341] net eth0: ALE Table size 1024 [ OK ] Started Login Service. [ OK ] Reached target Network. Starting Network Name Resolution... Starting Permit User Sessions... Starting thttpd.service... [ 8.885359] TI DP83867 4a101000.mdio:0d: attached PHY driver [TI DP83867] (mii_bus:phy_addr=4a101000.mdio:0d, irq=-1) [ OK ] Started Permit User Sessions. [ 9.276145] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 9.456355] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 9.546288] net eth0: initializing cpsw version 1.12 (0) [ OK ] Started Network Name Resolution. [ OK ] Started thttpd.service. [ 9.721888] TI DP83867 4a101000.mdio:00: attached PHY driver [TI DP83867] (mii_bus:phy_addr=4a101000.mdio:00, irq=-1) [ 9.927389] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.243079] cpsw 4a100000.ethernet eth1: Link is Up - 100Mbps/Full - flow control rx/tx [ 10.251185] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Starting rng-tools.service... [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Serial Getty on ttyS3. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... [ 10.869514] random: crng init done [ OK ] Started rng-tools.service. [ OK ] Started Synchronize System and HW clocks. Starting Hostname Service... Starting thermal-zone-init.service... [ OK ] Started thermal-zone-init.service. [ OK ] Started Hostname Service. [ 12.003247] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 12.011349] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: binutils cifs-utils dosfstools libreadline6 m4 If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. [ 12.971450] 47401300.usb-phy supply vcc not found, using dummy regulator [ 13.018615] usbcore: registered new interface driver usbfs [ 13.018683] usbcore: registered new interface driver hub [ 13.066592] usbcore: registered new device driver usb [ 13.196592] musb-hdrc musb-hdrc.0: MUSB HDRC host driver [ 13.253551] musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 1 [ 13.333381] ti-pruss 4a300000.pruss: creating PRU cores and other child platform devices [ 13.345016] hub 1-0:1.0: USB hub found [ 13.372301] hub 1-0:1.0: 1 port detected [ 13.403468] 47401b00.usb-phy supply vcc not found, using dummy regulator [ 13.426203] irq: no irq domain found for /ocp/pruss_soc_bus@4a326000/pruss@4a300000/intc@4a320000 ! [ 13.459196] musb-hdrc musb-hdrc.1: MUSB HDRC host driver [ 13.459228] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 2 [ 13.497301] hub 2-0:1.0: USB hub found [ 13.497345] hub 2-0:1.0: 1 port detected [ 13.651733] irq: no irq domain found for /ocp/pruss_soc_bus@4a326000/pruss@4a300000/intc@4a320000 ! [ 13.761298] remoteproc remoteproc1: 4a334000.pru0 is available [ 13.795863] pru-rproc 4a334000.pru0: PRU rproc node /ocp/pruss_soc_bus@4a326000/pruss@4a300000/pru@4a334000 probed successfully [ 13.832250] remoteproc remoteproc2: 4a338000.pru1 is available [ 13.838205] pru-rproc 4a338000.pru1: PRU rproc node /ocp/pruss_soc_bus@4a326000/pruss@4a300000/pru@4a338000 probed successfully [ 14.107298] musb-hdrc musb-hdrc.1: VBUS_ERROR in a_wait_vrise (80,