U-Boot SPL 2017.01-g9fd60700db (Jun 28 2017 - 19:55:57) DRA752-GP ES2.0 Trying to boot from MMC1 reading uboot.env ** Unable to read "uboot.env" from mmc0:1 ** Using default environment reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2017.01-g9fd60700db (Jun 28 2017 - 19:55:57 -0400) CPU : DRA752-GP ES2.0 Model: TI AM572x EVM Rev A3 Board: AM572x EVM REV A.30 DRAM: 2 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 reading uboot.env ** Unable to read "uboot.env" from mmc0:1 ** Using default environment SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: not set. Validating first E-fuse MAC cpsw Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 574 bytes read in 4 ms (139.6 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 3722224 bytes read in 212 ms (16.7 MiB/s) 103304 bytes read in 92 ms (1.1 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe3000, end 8ffff387 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.28-geed43d1050 (usr@usr-VirtualBox) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP PREEMPT Thu Aug 24 15:54:57 JST 2017 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt:Machine model: TI AM572x EVM Rev A3 [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB [ 0.000000] OF: reserved mem: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009f000000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x00000000fe400000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x00000000ffd00000 to fe600000 for dram barrier [ 0.000000] DRA752 ES2.0 [ 0.000000] percpu: Embedded 13 pages/cpu @eed34000 s22092 r8192 d22964 u53248 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 472640 [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=PARTUUID=00092998-02 rw rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1675680K/1897472K available (8192K kernel code, 314K rwdata, 2412K rodata, 2048K init, 296K bss, 33376K reserved, 188416K cma-reserved, 1283072K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0a00000 (10208 kB) [ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB) [ 0.000000] .data : 0xc1000000 - 0xc104e860 ( 315 kB) [ 0.000000] .bss : 0xc1050000 - 0xc109a130 ( 297 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000016] Switching to timer-based delay loop, resolution 162ns [ 0.000315] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000323] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000734] Console: colour dummy device 80x30 [ 0.000752] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2' [ 0.000759] This ensures that you still see kernel messages. Please [ 0.000765] update your kernel commandline. [ 0.000782] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000795] pid_max: default: 32768 minimum: 301 [ 0.000895] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000906] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001518] CPU: Testing write buffer coherency: ok [ 0.001729] /cpus/cpu@0 missing clock-frequency property [ 0.001746] /cpus/cpu@1 missing clock-frequency property [ 0.001758] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001774] Setting up static identity map for 0x80200000 - 0x80200060 [ 0.080066] EFI services will not be available. [ 0.170319] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.170406] Brought up 2 CPUs [ 0.170420] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.170427] CPU: All CPU(s) started in HYP mode. [ 0.170434] CPU: Virtualization extensions available. [ 0.170941] devtmpfs: initialized [ 0.198219] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.198451] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.198467] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.201832] pinctrl core: initialized pinctrl subsystem [ 0.202630] NET: Registered protocol family 16 [ 0.203486] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.204455] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.313671] omap_hwmod: dcan1: _wait_target_disable failed [ 0.440378] cpuidle: using governor ladder [ 0.470400] cpuidle: using governor menu [ 0.480098] OMAP GPIO hardware version 0.1 [ 0.494600] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.521053] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.521063] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.521409] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.521419] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.521951] OMAP DMA hardware revision 0.0 [ 0.571674] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.572969] edma 43300000.edma: memcpy is disabled [ 0.577779] edma 43300000.edma: TI EDMA DMA engine driver [ 0.582217] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.582388] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.582535] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.582683] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.582940] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.583112] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.585750] palmas 0-0058: Irq flag is 0x00000008 [ 0.613380] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 0.617179] vtt_fixed: supplied by smps3 [ 0.651347] random: fast init done [ 0.692496] vdd_3v3: supplied by regen1 [ 0.692715] aic_dvdd_fixed: supplied by vdd_3v3 [ 0.695882] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.696374] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 0.696940] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 0.697130] media: Linux media interface: v0.10 [ 0.697175] Linux video capture interface: v2.00 [ 0.697209] pps_core: LinuxPPS API ver. 1 registered [ 0.697217] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.697237] PTP clock support registered [ 0.697276] EDAC MC: Ver: 3.0.0 [ 0.697964] omap-mailbox 4883c000.mailbox: omap mailbox rev 0x400 [ 0.698260] omap-mailbox 4883e000.mailbox: omap mailbox rev 0x400 [ 0.698539] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.698819] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.699155] Advanced Linux Sound Architecture Driver Initialized. [ 0.699966] clocksource: Switched to clocksource arch_sys_counter [ 0.710688] NET: Registered protocol family 2 [ 0.711186] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.711249] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.711374] TCP: Hash tables configured (established 8192 bind 8192) [ 0.711419] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.711450] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.711577] NET: Registered protocol family 1 [ 0.711921] RPC: Registered named UNIX socket transport module. [ 0.711931] RPC: Registered udp transport module. [ 0.711938] RPC: Registered tcp transport module. [ 0.711945] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.712855] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.715763] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 0.723337] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.724037] NFS: Registering the id_resolver key type [ 0.724064] Key type id_resolver registered [ 0.724072] Key type id_legacy registered [ 0.724114] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.725272] bounce: pool size: 64 pages [ 0.725417] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.725427] io scheduler noop registered [ 0.725435] io scheduler deadline registered [ 0.725560] io scheduler cfq registered (default) [ 0.729930] pinctrl-single 4a003400.pinmux: please update dts to use #pinctrl-cells = <1> [ 0.730475] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.733874] OF: PCI: host bridge /ocp/axi@0/pcie@51000000 ranges: [ 0.733887] OF: PCI: No bus range found for /ocp/axi@0/pcie@51000000, using [bus 00-ff] [ 0.733921] OF: PCI: IO 0x20003000..0x20012fff -> 0x00000000 [ 0.733943] OF: PCI: MEM 0x20013000..0x2fffffff -> 0x20013000 [ 1.735340] dra7-pcie 51000000.pcie: phy link never came up [ 1.735509] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00 [ 1.735522] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.735533] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.735544] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 1.735917] PCI: bus0: Fast back to back transfers disabled [ 1.736037] PCI: bus1: Fast back to back transfers enabled [ 1.736154] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 1.736170] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 1.736184] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.736401] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 1.737434] backlight supply power not found, using dummy regulator [ 1.799497] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 1.802902] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 301, base_baud = 3000000) is a 8250 [ 2.771530] console [ttyS2] enabled [ 2.775867] 48422000.serial: ttyS7 at MMIO 0x48422000 (irq = 302, base_baud = 3000000) is a 8250 [ 2.786614] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ 2.793391] [drm] Initialized [ 2.798257] OMAP DSS rev 6.1 [ 2.801646] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 2.809990] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops) [ 2.820047] display supply vcc not found, using dummy regulator [ 2.997208] brd: module loaded [ 3.015510] loop: module loaded [ 3.019225] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 3.028920] libphy: Fixed MDIO Bus: probed [ 3.089994] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 3.096117] libphy: 48485000.mdio: probed [ 3.104303] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver Micrel KSZ9031 Gigabit PHY [ 3.114041] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver Micrel KSZ9031 Gigabit PHY [ 3.124266] cpsw 48484000.ethernet: Detected MACID = a0:f6:fd:a6:04:b0 [ 3.130953] cpsw 48484000.ethernet: cpts: overflow check period 500 (jiffies) [ 3.139218] cpsw 48484000.ethernet: cpsw: Detected MACID = a0:f6:fd:a6:04:b1 [ 3.147624] mousedev: PS/2 mouse device common for all mice [ 3.153558] i2c /dev entries driver [ 3.159891] gpio-fan gpio_fan: GPIO fan initialized [ 3.166138] tmp102 0-0048: initialized [ 3.175042] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.250306] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 3.256686] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 3.400868] ledtrig-cpu: registered to indicate activity on CPUs [ 3.411577] NET: Registered protocol family 10 [ 3.426700] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.433041] NET: Registered protocol family 17 [ 3.437643] Key type dns_resolver registered [ 3.442035] omap_voltage_late_init: Voltage driver support not added [ 3.448479] Power Management for TI OMAP4+ devices. [ 3.453586] Registering SWP/SWPB emulation handler [ 3.467387] dmm 4e000000.dmm: initialized all PAT entries [ 3.501031] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.507672] [drm] No driver support for vblank timestamp query. [ 3.515496] [drm] Enabling DMM ywrap scrolling [ 3.554219] mmc1: new DDR MMC card at address 0001 [ 3.554563] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 3.554721] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 3.554865] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 3.555340] mmcblk1: p1 p2 p3 [ 3.568352] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.570146] mmc0: new ultra high speed DDR50 SDHC card at address 0007 [ 3.570414] mmcblk0: mmc0:0007 SD08G 7.42 GiB [ 3.571212] mmcblk0: p1 p2 [ 3.588631] Console: switching to colour frame buffer device 100x30 [ 3.643100] omapdrm omapdrm.0: fb0: omapdrm frame buffer device [ 3.682404] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 3.689342] hctosys: unable to open rtc device (rtc0) [ 3.694992] aic_dvdd_fixed: disabling [ 3.698671] vmmcwl_fixed: disabling [ 3.702355] ldousb: disabling [ 3.705601] ALSA device list: [ 3.708579] No soundcards found. [ 7.095210] EXT4-fs (mmcblk0p2): recovery complete [ 7.103965] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 7.112140] VFS: Mounted root (ext4 filesystem) on device 179:50. [ 7.120300] devtmpfs: mounted [ 7.124545] Freeing unused kernel memory: 2048K (c0e00000 - c1000000) [ 7.334441] systemd[1]: System time before build time, advancing clock. [ 7.393652] systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 7.412139] systemd[1]: Detected architecture arm. Welcome to Arago 2017.05! [ 7.451317] systemd[1]: Set hostname to . [ 7.465543] systemd[1]: Initializing machine ID from random generator. [ 7.804774] systemd[1]: sysinit.target: Found ordering cycle on sysinit.target/start [ 7.812600] systemd[1]: sysinit.target: Found dependency on alignment.service/start [ 7.820312] systemd[1]: sysinit.target: Found dependency on sysinit.target/start [ 7.827754] systemd[1]: sysinit.target: Breaking ordering cycle by deleting job alignment.service/start [ 7.837247] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with sysinit.target/start [ SKIP ] Ordering cycle found, skipping alignment.service [ 7.882332] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ OK ] Reached target Swap. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Created slice User and Session Slice. [ OK ] Listening on Syslog Socket. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Created slice System Slice. [ OK ] Created slice system-getty.slice. [ OK ] Listening on udev Kernel Socket. [ OK ] Reached target Remote File Systems. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Listening on udev Control Socket. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Reached target Paths. [ OK ] Reached target Slices. [ OK ] Listening on Journal Socket. Mounting Debug File System... Starting Setup Virtual Console... Starting Create Static Device Nodes in /dev... Starting Load Kernel Modules... Starting Remount Root and Kernel File Systems... [ 8.545066] cmemk: loading out-of-tree module taints kernel. [ 8.554521] CMEMK module: reference Linux version 4.9.28 [ 8.561331] allocated heap buffer 0x40500000 of size 0x100000 [ 8.567147] cmemk initialized Starting Journal Service... [ 8.586380] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 8.595948] cryptodev: driver 1.8 loaded. Mounting Temporary Directory... Mounting POSIX Message Queue File System... [ OK ] Mounted Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Temporary Directory. [ OK ] Started Journal Service. [ OK ] Started Setup Virtual Console. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Load Kernel Modules. [ OK ] Started Remount Root and Kernel File Systems. Starting Rebuild Hardware Database... Mounting Configuration File System... Starting Apply Kernel Variables... [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... Starting udev Kernel Device Manager... Starting Flush Journal to Persistent Storage... [ OK ] Mounted Configuration File System. [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Apply Kernel Variables. [ 9.309497] systemd-journald[117]: Received request to flush runtime journal from PID 1 Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Rebuild Journal Catalog... Starting Rebuild Dynamic Linker Cache... [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Load/Save Random Seed. [ OK ] Started Rebuild Journal Catalog. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Opkg first boot configure... Starting Update UTMP about System Boot/Shutdown... Starting Network Time Synchronization... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Rebuild Hardware Database. Starting udev Coldplug all Devices... [ OK ] Started Network Time Synchronization. Starting Synchronize System and HW clocks... [ OK ] Reached target System Time Synchronized. [FAILED] Failed to start Synchronize System and HW clocks. See 'systemctl status sync-clocks.service' for details. [ OK ] Started udev Coldplug all Devices. [ 12.499606] omap-rproc 58820000.ipu: assigned reserved memory node ipu1_cma@9d000000 [ 12.520263] remoteproc remoteproc0: 58820000.ipu is available [ 12.528468] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 [ 12.549614] remoteproc remoteproc1: 55020000.ipu is available [ 12.569746] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [ 12.577643] remoteproc remoteproc2: 40800000.dsp is available [ 12.600306] omap-rproc 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000 [ 12.610119] remoteproc remoteproc3: 41000000.dsp is available [ OK ] Found device /dev/ttyS2. [ 13.083325] remoteproc remoteproc1: powering up 55020000.ipu [ 13.090682] remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3743164 [ 13.109760] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ 13.160832] input: pixcir_tangoc as /devices/platform/44000000.ocp/4807c000.i2c/i2c-4/4-005c/input/input1 [ 13.185027] mt9t11x 4-003c: input-clock-freq: 32000000 [ 13.191748] mt9t11x 4-003c: pixel-clock-freq: 96000000 [ 13.224148] mt9t11x 4-003c: mt9t111 chip ID 2680 rev ffffff87 [ 13.231080] mt9t11x 4-003c: mt9t11x sensor driver registered !! [ 13.249225] virtio_rpmsg_bus virtio0: rpmsg host is online [ 13.260402] remoteproc remoteproc1: registered virtio0 (type 7) [ 13.267644] remoteproc remoteproc1: remote processor 55020000.ipu is now up [ 13.278861] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x65 [ 13.293328] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x66 [ 13.354754] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ 13.360968] omap-des 480a5000.des: will run requests pump with realtime priority [ 13.393632] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin [ 13.450790] vpe 489d0000.vpe: Device registered as /dev/video0 [ 13.484805] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ OK ] Started Opkg first boot configure. [ 14.432157] remoteproc remoteproc0: powering up 58820000.ipu [ 14.437852] remoteproc remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 4872056 [ 14.446862] omap-iommu 58882000.mmu: 58882000.mmu: version 2.1 [ 14.459487] virtio_rpmsg_bus virtio1: rpmsg host is online [ 14.465069] remoteproc remoteproc0: registered virtio1 (type 7) [ 14.472618] remoteproc remoteproc0: remote processor 58820000.ipu is now up [ 14.473864] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc2 [ 14.487908] remoteproc remoteproc2: powering up 40800000.dsp [ 14.487916] remoteproc remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 21891524 [ 14.494582] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 14.494610] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 14.494673] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 14.529805] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x32 [ 14.541592] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x33 [ 14.549859] virtio_rpmsg_bus virtio1: creating channel rpmsg-omx addr 0x3c [ 14.560317] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x65 [ 14.567502] rtc-ds1307 2-006f: SET TIME! [ 14.571891] vip 48990000.vip: loading firmware vpdma-1b8.bin [ 14.573862] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 14.580098] rtc-ds1307 2-006f: 64 bytes nvram [ 14.586212] remoteproc remoteproc3: powering up 41000000.dsp [ 14.586223] remoteproc remoteproc3: Booting fw image dra7-dsp2-fw.xe66, size 21891524 [ 14.592896] omap_hwmod: mmu0_dsp2: _wait_target_disable failed [ 14.592930] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0 [ 14.593016] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0 [ 14.594869] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 14.595772] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 14.626938] SCSI subsystem initialized [ 14.692970] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 14.703443] omap-aes 4b500000.aes: will run requests pump with realtime priority [ 14.741009] omap-hdmi-audio omap-hdmi-audio.0.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok [ 14.758719] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 14.772038] vip 48990000.vip: VPDMA firmware loaded [ 14.777456] omap-aes 4b700000.aes: will run requests pump with realtime priority [ 14.796797] vip2-s0: Port A: Using subdev mt9t11x for capture [ 14.804941] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 [ 14.805873] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 14.805891] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 14.805897] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ OK ] Created slice system-systemd\x2dbacklight.sli[ 14.863297] vip2-s0: device registered as video1 ce. Starting Load/Save Screen Backlight...htness of backlight:backlight... [ 14.900308] virtio_rpmsg_bus virtio2: rpmsg host is online [ 14.905873] remoteproc remoteproc2: registered virtio2 (type 7) [ 14.926287] remoteproc remoteproc2: remote processor 40800000.dsp is now up [ 14.952317] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x3d [ 14.995776] virtio_rpmsg_bus virtio3: rpmsg host is online [ 15.002548] remoteproc remoteproc3: registered virtio3 (type 7) [ 15.019771] remoteproc remoteproc3: remote processor 41000000.dsp is now up [ 15.064291] virtio_rpmsg_bus virtio3: creating channel rpmsg-proto addr 0x3d [ OK ] Started Load/Save Screen Backlight Brightness of backlight:backlight. [ 15.095998] scsi host0: ahci [ 15.100693] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 346 [ 15.227493] asoc-simple-card sound0: tlv320aic3x-hifi <-> 48468000.mcasp mapping ok [ 15.279896] FAT-fs (mmcblk1p2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 15.299755] FAT-fs (mmcblk1p3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 15.328841] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 15.412822] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 15.464966] ata1: SATA link down (SStatus 0 SControl 300) [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 16.216235] ti-pruss 4b200000.pruss: creating PRU cores and other child platform devices [ 16.232589] rpmsg_rpc virtio0.rpmsg-rpc.-1.101: probing service dce-callback with src 1024 dst 101 [ 16.245068] rpmsg_rpc virtio0.rpmsg-rpc.-1.102: probing service rpmsg-dce with src 1025 dst 102 [ 16.245417] rpmsg_rpc virtio0.rpmsg-rpc.-1.101: published functions = 4 [ 16.254996] rpmsg_rpc virtio1.rpmsg-rpc.-1.101: probing service rpc_example_2 with src 1024 dst 101 [ 16.256502] rpmsg_rpc virtio0.rpmsg-rpc.-1.102: published functions = 9 [ 16.256543] rpmsg_rpc virtio1.rpmsg-rpc.-1.101: published functions = 8 [ 16.302633] NET: Registered protocol family 43 [ 16.359825] irq: no irq domain found for /ocp/pruss_soc_bus@4b226000/pruss@4b200000/intc@4b220000 ! [ 16.372489] irq: no irq domain found for /ocp/pruss_soc_bus@4b226000/pruss@4b200000/intc@4b220000 ! [ 16.382608] ti-pruss 4b280000.pruss: creating PRU cores and other child platform devices [ 16.392646] irq: no irq domain found for /ocp/pruss_soc_bus@4b2a6000/pruss@4b280000/intc@4b2a0000 ! [ 16.402962] irq: no irq domain found for /ocp/pruss_soc_bus@4b2a6000/pruss@4b280000/intc@4b2a0000 ! [ 16.431568] usbcore: registered new interface driver usbfs [ 16.445873] usbcore: registered new interface driver hub [ 16.454940] remoteproc remoteproc4: 4b234000.pru0 is available [ 16.454979] pru-rproc 4b234000.pru0: PRU rproc node /ocp/pruss_soc_bus@4b226000/pruss@4b200000/pru@4b234000 probed successfully [ 16.455212] remoteproc remoteproc5: 4b238000.pru1 is available [ 16.455256] pru-rproc 4b238000.pru1: PRU rproc node /ocp/pruss_soc_bus@4b226000/pruss@4b200000/pru@4b238000 probed successfully [ 16.455511] remoteproc remoteproc6: 4b2b4000.pru0 is available [ 16.455540] pru-rproc 4b2b4000.pru0: PRU rproc node /ocp/pruss_soc_bus@4b2a6000/pruss@4b280000/pru@4b2b4000 probed successfully [ 16.455758] remoteproc remoteproc7: 4b2b8000.pru1 is available [ 16.455788] pru-rproc 4b2b8000.pru1: PRU rproc node /ocp/pruss_soc_bus@4b2a6000/pruss@4b280000/pru@4b2b8000 probed successfully [ 16.552308] usbcore: registered new device driver usb [ 16.581962] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 16.587565] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 16.596473] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x02010010 [ 16.605748] xhci-hcd xhci-hcd.1.auto: irq 473, io mem 0x48890000 [ OK ] Reached target Sound Card. [ 16.613984] hub 1-0:1.0: USB hub found [ 16.621768] hub 1-0:1.0: 1 port detected [ 16.625984] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 16.632229] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 16.640328] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 16.649418] hub 2-0:1.0: USB hub found [ 16.654045] hub 2-0:1.0: 1 port detected [ 16.989997] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 17.184185] hub 1-1:1.0: USB hub found [ 17.188408] hub 1-1:1.0: 4 ports detected [ 17.320040] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 17.360228] hub 2-1:1.0: USB hub found [ 17.364539] hub 2-1:1.0: 4 ports detected [ OK ] Started Rebuild Dynamic Linker Cache. Starting Update is Completed... [ OK ] Started Update is Completed. [ OK ] Reached target System Initialization. [ OK ] Listening on dropbear.socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Login Service... Starting Telephony service... Starting uim-sysfs.service... Starting TI MultiCore Tools Daemon... [ OK ] Started System Logging Service. Starting Print notice about GPLv3 packages... [ OK ] Started Kernel Logging Service. [ OK ] Started D-Bus System Message Bus. [ OK ] Started Telephony service. Starting Network Service... Starting Avahi mDNS/DNS-SD Stack... Starting Save/Restore Sound Card State... [ OK ] Started TI MultiCore Tools Daemon. [ OK ] Started Login Service. [ 19.625312] Bluetooth: Core ver 2.22 [ 19.628965] NET: Registered protocol family 31 [ 19.658318] Bluetooth: HCI device and connection manager initialized [ 19.658333] Bluetooth: HCI socket layer initialized [ 19.658345] Bluetooth: L2CAP socket layer initialized [ 19.658389] Bluetooth: SCO socket layer initialized [ OK ] Started Save/Restore Sound Card State. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Network Service. [ OK ] Reached target Network. Starting Enable and configure wl18xx bluetooth stack... [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf.[ 19.744601] net eth1: initializing cpsw version 1.15 (0) Starting Lightning Fast Webserver With Light System Requirements... Starting Simple Network Management Protocol (SNMP)[ 19.818492] net eth0: initialized cpsw ale version 1.4 Daemon.... Starting Permit User Sessions... Starting Network Name Resolution... [ 19.862643] net eth0: ALE Table size 1024 [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started Enable and configure wl18xx bluetooth stack. [ OK ] Started Permit User Sessions. [ OK ] Started Serial Getty on ttyS2. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ 19.993156] Micrel KSZ9031 Gigabit PHY 48485000.mdio:02: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=48485000.mdio:02, irq=-1) [ 20.038033] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ OK ] Started Network Name Resolution. [ 20.069341] net eth0: initializing cpsw version 1.15 (0) [ 20.125148] NET: Registered protocol family 15 [ 20.233695] Micrel KSZ9031 Gigabit PHY 48485000.mdio:01: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=48485000.mdio:01, irq=-1) [ 20.289821] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.296360] Initializing XFRM netlink socket [ 20.306605] random: crng init done [ OK ] Started Simple Network Management Protocol (SNMP) Daemon.. [ OK ] Started uim-sysfs.service. Starting rc.pvr.service... [ 21.092566] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [ OK ] Started rc.pvr.service. Starting weston.service... *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf binutils-dev binutils bison-dev bison cpp-symlinks cpp dosfstools g++-symlinks g++ gawk-dev gawk gcc-symlinks gcc gdb gdbc6x gdbserver gstreamer1.0-libav hidapi libcairo-perf-utils libgmp10 libidn11 libmpc3 libmpfr4 libreadline-dev libreadline6 m4-dev m4 make nettle parted swig-dev swig If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. [ 25.447397] omap_hwmod: mmu1_dsp2: _wait_target_disable failed [ 25.461186] omap_hwmod: mmu0_dsp2: _wait_target_disable failed [ 25.474853] omap_hwmod: mmu1_dsp1: _wait_target_disable failed [ 25.488492] omap_hwmod: mmu0_dsp1: _wait_target_disable failed _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am57xx-evm ttyS2 Arago 2017.05 am57xx-evm ttyS2 am57xx-evm login: root root@am57xx-evm:~# ls /dev/video* /dev/video0 /dev/video1 /dev/video10 /dev/video11 root@am57xx-evm:~# uname -a Linux am57xx-evm 4.9.28-geed43d1050 #1 SMP PREEMPT Thu Aug 24 15:54:57 JST 2017 armv7l GNU/Linux