[12:56:42][envoy-00069:~$] uname -a
Linux envoy-00069 3.6.11-ee6e568a #6 PREEMPT Fri Oct 4 17:31:46 PDT 2013 armv7l GNU/Linux
[12:56:48][envoy-00069:~$] 
[12:56:49][envoy-00069:~$] 
[12:56:49][envoy-00069:~$] insmod /lib/modules/3.6.11-ee6e568a/kernel/drivers/usb/musb/am35x.ko 
musb-hdrc musb-hdrc: dma type: dma-cppi41

6Waiting for PHY clock good...
_ru: cppi41_queue_mgr_init:  top of func, cppi41_queue_mgr(0xc0c91a6c)
_ru: cppi41_queue_mgr_init:  after dmaAllocCoh(), cppi41_queue_mgr(0xc0c91a6c), ptr(0xd09b9000)linking_ram[0].phys_addr(0x8b0b0000), q_mgr_regs(0xd09b4000), qmgrLRamRgn0BaseReg(0x80)_ru: cppi41_queue_mgr_init:  after __raw_wr()#1
_ru: cppi41_queue_mgr_init:  after __raw_wr()#2_ru: cppi41_queue_mgr_init:  after kzalloc(), ptr(0xceef4fc0)
_ru: cppi41_queue_mgr_init:  allocated_queues[0]=0xceef4fc0_ru: cppi41_dma_block_init:  top of func, _tbl(0xbf01ac40)
_ru: cppi41_dma_block_init: b4 accessing sched_tbl(0xbf01ac40)
_ru: cppi41_dma_block_init: b4 accessing sched_tbl(0xbf01ac40)
_ru: cppi41_dma_block_init: b4 accessing sched_tbl(0xbf01ac40)
_ru: cppi41_dma_block_init: b4 accessing sched_tbl(0xbf01ac40)
_ru: cppi41_dma_block_init: b4 accessing sched_tbl(0xbf01ac40)
_ru: cppi41_dma_block_init: b4 accessing sched_tbl(0xbf01ac40)
_ru: cppi41_dma_block_init: b4 accessing sched_tbl(0xbf01ac40)
_ru: cppi41_dma_block_init: b4 accessing sched_tbl(0xbf01ac40)
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 0shared, max 64
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 1tx, max 512
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 1rx, max 512
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 2tx, max 512
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 2rx, max 512
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 3tx, max 512
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 3rx, max 512
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 4tx, max 512
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 4rx, max 512
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 5tx, max 512
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 5rx, max 512
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 6tx, max 512
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 6rx, max 512
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 7tx, max 512
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 7rx, max 512
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 8tx, max 512
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 8rx, max 512
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 9tx, max 512
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 9rx, max 512
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 10tx, max 256
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 10rx, max 64
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 11tx, max 256
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 11rx, max 64
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 12tx, max 256
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 12rx, max 64
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 13shared, max 4096
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 14shared, max 1024
musb-hdrc musb-hdrc: musb-hdrc: hw_ep 15shared, max 1024
musb-hdrc musb-hdrc: MUSB HDRC host driver
musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
musb-hdrc musb-hdrc: supports USB remote wakeup
usb usb1: default language 0x0409
usb usb1: udev 1, busnum 1, minor = 0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: MUSB HDRC host driver
usb usb1: Manufacturer: Linux 3.6.11-ee6e568a musb-hcd
usb usb1: SerialNumber: musb-hdrc
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: individual port power switching
hub 1-0:1.0: no over-current protection
hub 1-0:1.0: Single TT
hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-0:1.0: power on to power good time: 10ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: enabling power on all ports
musb-hdrc musb-hdrc: <== devctl 98
musb-hdrc musb-hdrc: HOST mode, status 0, devctl 99 B
musb-hdrc musb-hdrc: USB Host mode controller at d09b0000 using DMA, IRQ 71
[12:57:12][envoy-00069:~$] musb-hdrc musb-hdrc: VBUS on (a_wait_vrise), devctl 19
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
musb-hdrc musb-hdrc: ** IRQ host usb0010 tx0000 rx0000
musb-hdrc musb-hdrc: <== Power=e0, DevCtl=5d, int_usb=0x10
musb-hdrc musb-hdrc: CONNECT (a_host) devctl 5d
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
hub 1-0:1.0: ****_ru: hub_port_connect_change: port 1, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
usb 1-1: new high-speed USB device number 2 using musb-hdrc
musb-hdrc musb-hdrc: qh cb000a00 urb cf2e30c0 dev0 ep0out, hw_ep 0, cfae9d80/8
musb-hdrc musb-hdrc: --> hw0 urb cf2e30c0 spd3 dev0 ep0out h_addr00 h_port00 bytes 8
musb-hdrc musb-hdrc: TX ep0 fifo d09b0420 count 8 buf cfae9d80
musb-hdrc musb-hdrc: Start TX0 pio
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0200, qh cb000a00, count 0, urb cf2e30c0, stage 1
musb-hdrc musb-hdrc: start IN-DATA
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0001, qh cb000a00, count 18, urb cf2e30c0, stage 2
musb-hdrc musb-hdrc: ep0 STATUS, csr 0842
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0800, qh cb000a00, count 0, urb cf2e30c0, stage 4
musb-hdrc musb-hdrc: complete cf2e30c0 usb_api_blocking_completion+0x0/0x28 (0), dev0 ep0in, 18/64
musb-hdrc musb-hdrc: qh cb000340 urb cf2e30c0 dev0 ep0out, hw_ep 0, cfae9d80/8
musb-hdrc musb-hdrc: --> hw0 urb cf2e30c0 spd3 dev0 ep0out h_addr00 h_port00 bytes 8
musb-hdrc musb-hdrc: TX ep0 fifo d09b0420 count 8 buf cfae9d80
musb-hdrc musb-hdrc: Start TX0 pio
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0200, qh cb000340, count 0, urb cf2e30c0, stage 1
musb-hdrc musb-hdrc: start no-DATA
musb-hdrc musb-hdrc: ep0 STATUS, csr 0860
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0841, qh cb000340, count 0, urb cf2e30c0, stage 4
musb-hdrc musb-hdrc: complete cf2e30c0 usb_api_blocking_completion+0x0/0x28 (0), dev0 ep0out, 0/0
musb-hdrc musb-hdrc: qh cb000340 urb cf2e30c0 dev2 ep0out, hw_ep 0, cf9f0800/8
musb-hdrc musb-hdrc: --> hw0 urb cf2e30c0 spd3 dev2 ep0out h_addr00 h_port00 bytes 8
musb-hdrc musb-hdrc: TX ep0 fifo d09b0420 count 8 buf cf9f0800
musb-hdrc musb-hdrc: Start TX0 pio
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0200, qh cb000340, count 0, urb cf2e30c0, stage 1
musb-hdrc musb-hdrc: start IN-DATA
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0001, qh cb000340, count 18, urb cf2e30c0, stage 2
musb-hdrc musb-hdrc: ep0 STATUS, csr 0842
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0800, qh cb000340, count 0, urb cf2e30c0, stage 4
musb-hdrc musb-hdrc: complete cf2e30c0 usb_api_blocking_completion+0x0/0x28 (0), dev2 ep0in, 18/18
musb-hdrc musb-hdrc: qh cb000340 urb cee27ec0 dev2 ep0out, hw_ep 0, ceef46c0/8
musb-hdrc musb-hdrc: --> hw0 urb cee27ec0 spd3 dev2 ep0out h_addr00 h_port00 bytes 8
musb-hdrc musb-hdrc: TX ep0 fifo d09b0420 count 8 buf ceef46c0
musb-hdrc musb-hdrc: Start TX0 pio
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0200, qh cb000340, count 0, urb cee27ec0, stage 1
musb-hdrc musb-hdrc: start IN-DATA
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0001, qh cb000340, count 9, urb cee27ec0, stage 2
musb-hdrc musb-hdrc: ep0 STATUS, csr 0842
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0800, qh cb000340, count 0, urb cee27ec0, stage 4
musb-hdrc musb-hdrc: complete cee27ec0 usb_api_blocking_completion+0x0/0x28 (0), dev2 ep0in, 9/9
musb-hdrc musb-hdrc: qh cb000a00 urb cee27ec0 dev2 ep0out, hw_ep 0, ceef46c0/8
musb-hdrc musb-hdrc: --> hw0 urb cee27ec0 spd3 dev2 ep0out h_addr00 h_port00 bytes 8
musb-hdrc musb-hdrc: TX ep0 fifo d09b0420 count 8 buf ceef46c0
musb-hdrc musb-hdrc: Start TX0 pio
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0200, qh cb000a00, count 0, urb cee27ec0, stage 1
musb-hdrc musb-hdrc: start IN-DATA
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0001, qh cb000a00, count 41, urb cee27ec0, stage 2
musb-hdrc musb-hdrc: ep0 STATUS, csr 0842
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0800, qh cb000a00, count 0, urb cee27ec0, stage 4
musb-hdrc musb-hdrc: complete cee27ec0 usb_api_blocking_completion+0x0/0x28 (0), dev2 ep0in, 41/41
usb 1-1: udev 2, busnum 1, minor = 1
usb 1-1: New USB device found, idVendor=0424, idProduct=2512
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: usb_probe_device
usb 1-1: configuration #1 chosen from 1 choice
musb-hdrc musb-hdrc: qh cb000300 urb cee27ec0 dev2 ep0out, hw_ep 0, ceef4500/8
musb-hdrc musb-hdrc: --> hw0 urb cee27ec0 spd3 dev2 ep0out h_addr00 h_port00 bytes 8
musb-hdrc musb-hdrc: TX ep0 fifo d09b0420 count 8 buf ceef4500
musb-hdrc musb-hdrc: Start TX0 pio
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0200, qh cb000300, count 0, urb cee27ec0, stage 1
musb-hdrc musb-hdrc: start no-DATA
musb-hdrc musb-hdrc: ep0 STATUS, csr 0860
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0841, qh cb000300, count 0, urb cee27ec0, stage 4
musb-hdrc musb-hdrc: complete cee27ec0 usb_api_blocking_completion+0x0/0x28 (0), dev2 ep0out, 0/0
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
hub 1-1:1.0: usb_probe_interface
hub 1-1:1.0: usb_probe_interface - got id
hub 1-1:1.0: USB hub found
musb-hdrc musb-hdrc: qh cb000280 urb cee27ec0 dev2 ep0out, hw_ep 0, ceef42c0/8
musb-hdrc musb-hdrc: --> hw0 urb cee27ec0 spd3 dev2 ep0out h_addr00 h_port00 bytes 8
musb-hdrc musb-hdrc: TX ep0 fifo d09b0420 count 8 buf ceef42c0
musb-hdrc musb-hdrc: Start TX0 pio
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0200, qh cb000280, count 0, urb cee27ec0, stage 1
musb-hdrc musb-hdrc: start IN-DATA
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0001, qh cb000280, count 9, urb cee27ec0, stage 2
musb-hdrc musb-hdrc: ep0 STATUS, csr 0842
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0800, qh cb000280, count 0, urb cee27ec0, stage 4
musb-hdrc musb-hdrc: complete cee27ec0 usb_api_blocking_completion+0x0/0x28 (0), dev2 ep0in, 9/15
hub 1-1:1.0: 2 ports detected
hub 1-1:1.0: compound device; port removable status: FF
hub 1-1:1.0: individual port power switching
hub 1-1:1.0: individual port over-current protection
musb-hdrc musb-hdrc: qh cb0002c0 urb cee27ec0 dev2 ep0out, hw_ep 0, ceef4240/8
musb-hdrc musb-hdrc: --> hw0 urb cee27ec0 spd3 dev2 ep0out h_addr00 h_port00 bytes 8
musb-hdrc musb-hdrc: TX ep0 fifo d09b0420 count 8 buf ceef4240
musb-hdrc musb-hdrc: Start TX0 pio
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0200, qh cb0002c0, count 0, urb cee27ec0, stage 1
musb-hdrc musb-hdrc: start no-DATA
musb-hdrc musb-hdrc: ep0 STATUS, csr 0860
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0841, qh cb0002c0, count 0, urb cee27ec0, stage 4
musb-hdrc musb-hdrc: complete cee27ec0 usb_api_blocking_completion+0x0/0x28 (0), dev2 ep0out, 0/0
hub 1-1:1.0: TT per port
hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-1:1.0: power on to power good time: 100ms
musb-hdrc musb-hdrc: qh cb0002c0 urb cee27ec0 dev2 ep0out, hw_ep 0, ceef4140/8
musb-hdrc musb-hdrc: --> hw0 urb cee27ec0 spd3 dev2 ep0out h_addr00 h_port00 bytes 8
musb-hdrc musb-hdrc: TX ep0 fifo d09b0420 count 8 buf ceef4140
musb-hdrc musb-hdrc: Start TX0 pio
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0200, qh cb0002c0, count 0, urb cee27ec0, stage 1
musb-hdrc musb-hdrc: start IN-DATA
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0001, qh cb0002c0, count 2, urb cee27ec0, stage 2
musb-hdrc musb-hdrc: ep0 STATUS, csr 0842
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0800, qh cb0002c0, count 0, urb cee27ec0, stage 4
musb-hdrc musb-hdrc: complete cee27ec0 usb_api_blocking_completion+0x0/0x28 (0), dev2 ep0in, 2/2
musb-hdrc musb-hdrc: qh cb0002c0 urb cf2e30c0 dev2 ep0out, hw_ep 0, ceef4180/8
musb-hdrc musb-hdrc: --> hw0 urb cf2e30c0 spd3 dev2 ep0out h_addr00 h_port00 bytes 8
musb-hdrc musb-hdrc: TX ep0 fifo d09b0420 count 8 buf ceef4180
musb-hdrc musb-hdrc: Start TX0 pio
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0200, qh cb0002c0, count 0, urb cf2e30c0, stage 1
musb-hdrc musb-hdrc: start IN-DATA
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0001, qh cb0002c0, count 4, urb cf2e30c0, stage 2
musb-hdrc musb-hdrc: ep0 STATUS, csr 0842
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0800, qh cb0002c0, count 0, urb cf2e30c0, stage 4
musb-hdrc musb-hdrc: complete cf2e30c0 usb_api_blocking_completion+0x0/0x28 (0), dev2 ep0in, 4/4
hub 1-1:1.0: local power source is good
hub 1-1:1.0: enabling power on all ports
musb-hdrc musb-hdrc: qh cb0002c0 urb cee27ec0 dev2 ep0out, hw_ep 0, ceef4180/8
musb-hdrc musb-hdrc: --> hw0 urb cee27ec0 spd3 dev2 ep0out h_addr00 h_port00 bytes 8
musb-hdrc musb-hdrc: TX ep0 fifo d09b0420 count 8 buf ceef4180
musb-hdrc musb-hdrc: Start TX0 pio
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0200, qh cb0002c0, count 0, urb cee27ec0, stage 1
musb-hdrc musb-hdrc: start no-DATA
musb-hdrc musb-hdrc: ep0 STATUS, csr 0860
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0841, qh cb0002c0, count 0, urb cee27ec0, stage 4
musb-hdrc musb-hdrc: complete cee27ec0 usb_api_blocking_completion+0x0/0x28 (0), dev2 ep0out, 0/0
musb-hdrc musb-hdrc: qh cb0002c0 urb cee27e00 dev2 ep0out, hw_ep 0, ceef4180/8
musb-hdrc musb-hdrc: --> hw0 urb cee27e00 spd3 dev2 ep0out h_addr00 h_port00 bytes 8
musb-hdrc musb-hdrc: TX ep0 fifo d09b0420 count 8 buf ceef4180
musb-hdrc musb-hdrc: Start TX0 pio
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0200, qh cb0002c0, count 0, urb cee27e00, stage 1
musb-hdrc musb-hdrc: start no-DATA
musb-hdrc musb-hdrc: ep0 STATUS, csr 0860
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0841, qh cb0002c0, count 0, urb cee27e00, stage 4
musb-hdrc musb-hdrc: complete cee27e00 usb_api_blocking_completion+0x0/0x28 (0), dev2 ep0out, 0/0
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
hub 1-0:1.0: port 1 enable change, status 00000503
musb-hdrc musb-hdrc: qh cb0002c0 urb cee27e00 dev2 ep0out, hw_ep 0, cb036f80/8
musb-hdrc musb-hdrc: --> hw0 urb cee27e00 spd3 dev2 ep0out h_addr00 h_port00 bytes 8
musb-hdrc musb-hdrc: TX ep0 fifo d09b0420 count 8 buf cb036f80
musb-hdrc musb-hdrc: Start TX0 pio
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0200, qh cb0002c0, count 0, urb cee27e00, stage 1
musb-hdrc musb-hdrc: start IN-DATA
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0001, qh cb0002c0, count 4, urb cee27e00, stage 2
musb-hdrc musb-hdrc: ep0 STATUS, csr 0842
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0800, qh cb0002c0, count 0, urb cee27e00, stage 4
musb-hdrc musb-hdrc: complete cee27e00 usb_api_blocking_completion+0x0/0x28 (0), dev2 ep0in, 4/4
musb-hdrc musb-hdrc: qh cb000540 urb cee27ec0 dev2 ep0out, hw_ep 0, cb036f80/8
musb-hdrc musb-hdrc: --> hw0 urb cee27ec0 spd3 dev2 ep0out h_addr00 h_port00 bytes 8
musb-hdrc musb-hdrc: TX ep0 fifo d09b0420 count 8 buf cb036f80
musb-hdrc musb-hdrc: Start TX0 pio
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0200, qh cb000540, count 0, urb cee27ec0, stage 1
musb-hdrc musb-hdrc: start IN-DATA
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0001, qh cb000540, count 4, urb cee27ec0, stage 2
musb-hdrc musb-hdrc: ep0 STATUS, csr 0842
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0800, qh cb000540, count 0, urb cee27ec0, stage 4
musb-hdrc musb-hdrc: complete cee27ec0 usb_api_blocking_completion+0x0/0x28 (0), dev2 ep0in, 4/4
hub 1-1:1.0: *****_ru: hub_activate: port 2: status 0101 change 0001
musb-hdrc musb-hdrc: qh cb000540 urb cee27ec0 dev2 ep0out, hw_ep 0, cb036f80/8
musb-hdrc musb-hdrc: --> hw0 urb cee27ec0 spd3 dev2 ep0out h_addr00 h_port00 bytes 8
musb-hdrc musb-hdrc: TX ep0 fifo d09b0420 count 8 buf cb036f80
musb-hdrc musb-hdrc: Start TX0 pio
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0200, qh cb000540, count 0, urb cee27ec0, stage 1
musb-hdrc musb-hdrc: start no-DATA
musb-hdrc musb-hdrc: ep0 STATUS, csr 0860
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0841, qh cb000540, count 0, urb cee27ec0, stage 4
musb-hdrc musb-hdrc: complete cee27ec0 usb_api_blocking_completion+0x0/0x28 (0), dev2 ep0out, 0/0
musb-hdrc musb-hdrc: qh cb000540 periodic slot 10
musb-hdrc musb-hdrc: qh cb000540 urb cf2e30c0 dev2 ep1in-intr, hw_ep 10, ceef4380/1
musb-hdrc musb-hdrc: <-- hw10 urb cf2e30c0 spd3 dev2 ep1in h_addr00 h_port00 bytes 1
musb-hdrc musb-hdrc: RXCSR10 := 3020
hub 1-1:1.0: state 7 ports 2 chg 0004 evt 0000
musb-hdrc musb-hdrc: qh cb000380 urb cee27ec0 dev2 ep0out, hw_ep 0, cb036f80/8
musb-hdrc musb-hdrc: --> hw0 urb cee27ec0 spd3 dev2 ep0out h_addr00 h_port00 bytes 8
musb-hdrc musb-hdrc: TX ep0 fifo d09b0420 count 8 buf cb036f80
musb-hdrc musb-hdrc: Start TX0 pio
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0200, qh cb000380, count 0, urb cee27ec0, stage 1
musb-hdrc musb-hdrc: start IN-DATA
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0001, qh cb000380, count 4, urb cee27ec0, stage 2
musb-hdrc musb-hdrc: ep0 STATUS, csr 0842
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0800, qh cb000380, count 0, urb cee27ec0, stage 4
musb-hdrc musb-hdrc: complete cee27ec0 usb_api_blocking_completion+0x0/0x28 (0), dev2 ep0in, 4/4
hub 1-1:1.0: ****_ru: hub_port_connect_change: port 2, status 0101, change 0000, 12 Mb/s
musb-hdrc musb-hdrc: qh cb000380 urb cee27ec0 dev2 ep0out, hw_ep 0, cb036f40/8
musb-hdrc musb-hdrc: --> hw0 urb cee27ec0 spd3 dev2 ep0out h_addr00 h_port00 bytes 8
musb-hdrc musb-hdrc: TX ep0 fifo d09b0420 count 8 buf cb036f40
musb-hdrc musb-hdrc: Start TX0 pio
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0200, qh cb000380, count 0, urb cee27ec0, stage 1
musb-hdrc musb-hdrc: start no-DATA
musb-hdrc musb-hdrc: ep0 STATUS, csr 0860
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0841, qh cb000380, count 0, urb cee27ec0, stage 4
musb-hdrc musb-hdrc: complete cee27ec0 usb_api_blocking_completion+0x0/0x28 (0), dev2 ep0out, 0/0
musb-hdrc musb-hdrc: qh cb000380 urb cee27ec0 dev2 ep0out, hw_ep 0, cb036f40/8
musb-hdrc musb-hdrc: --> hw0 urb cee27ec0 spd3 dev2 ep0out h_addr00 h_port00 bytes 8
musb-hdrc musb-hdrc: TX ep0 fifo d09b0420 count 8 buf cb036f40
musb-hdrc musb-hdrc: Start TX0 pio
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8
musb-hdrc musb-hdrc: <== csr0 0200, qh cb000380, count 0, urb cee27ec0, stage 1
musb-hdrc musb-hdrc: start IN-DATA
musb-hdrc musb-hdrc: ** IRQ host usb0008 tx0001 rx0000
musb-hdrc musb-hdrc: <== Power=f0, DevCtl=5d, int_usb=0x8