U-Boot 2016.05-g97c89e23c8 (Mar 09 2017 - 08:17:38 +0530) CPU : DRA752-GP ES2.0 Model: TI DRA742 Board: DRA74x EVM REV H.0 DRAM: 4 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid GPT *** GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid Backup GPT *** ERROR: cannot find partition: 'userdata' at arch/arm/cpu/armv7/omap-common/utils.c:195/mmc_get_part_size() Warning: fastboot.userdata_size: unable to calc SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: eth0: ethernet@48484000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt ** Unable to read file uEnv.txt ** switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 4331280 bytes read in 230 ms (18 MiB/s) 108169 bytes read in 38 ms (2.7 MiB/s) Booting from mmc0 ... Kernel image @ 0x82000000 [ 0x000000 - 0x421710 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe2000, end 8ffff688 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.67-gcf0b1cb-dirty (xxz@optiplex-3040) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #53 SMP PREEMPT Wed Aug 16 09:23:35 CST 2017 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA742 [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB [ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB [ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 32 MiB [ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009f000000, size 8 MiB [ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x00000000fd800000 [ 0.000000] Forcing write-allocate cache policy for SMP [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x000000027fd00000 to fe600000 for dram barrier [ 0.000000] DRA752 ES2.0 [ 0.000000] PERCPU: Embedded 11 pages/cpu @eb6f5000 s16192 r8192 d20672 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040704 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=PARTUUID=1862149d-02 rw rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 3921468K/4169728K available (7779K kernel code, 515K rwdata, 2996K rodata, 1016K init, 8873K bss, 59844K reserved, 188416K cma-reserved, 3362816K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0a8dfd0 (10776 kB) [ 0.000000] .init : 0xc0a8e000 - 0xc0b8c000 (1016 kB) [ 0.000000] .data : 0xc0b8c000 - 0xc0c0ce48 ( 516 kB) [ 0.000000] .bss : 0xc0c0e000 - 0xc14b87f8 (8874 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000004] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000015] Switching to timer-based delay loop, resolution 162ns [ 0.000307] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000317] OMAP clocksource: 32k_counter at 32768 Hz [ 0.001015] Console: colour dummy device 80x30 [ 0.001057] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.001064] This ensures that you still see kernel messages. Please [ 0.001070] update your kernel commandline. [ 0.001077] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001084] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001090] ... MAX_LOCK_DEPTH: 48 [ 0.001096] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001102] ... CLASSHASH_SIZE: 4096 [ 0.001108] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001114] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001120] ... CHAINHASH_SIZE: 32768 [ 0.001126] memory used by lock dependency info: 5167 kB [ 0.001133] per task-struct memory footprint: 1536 bytes [ 0.086924] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.086945] pid_max: default: 32768 minimum: 301 [ 0.087892] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087913] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.093097] Initializing cgroup subsys io [ 0.093177] Initializing cgroup subsys memory [ 0.093299] Initializing cgroup subsys devices [ 0.093377] Initializing cgroup subsys freezer [ 0.093453] Initializing cgroup subsys perf_event [ 0.093510] Initializing cgroup subsys pids [ 0.093554] Initializing cgroup subsys debug [ 0.093722] CPU: Testing write buffer coherency: ok [ 0.095327] /cpus/cpu@0 missing clock-frequency property [ 0.095351] /cpus/cpu@1 missing clock-frequency property [ 0.095363] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.095493] Setting up static identity map for 0x80008380 - 0x800083e0 [ 0.190995] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.191407] Brought up 2 CPUs [ 0.191423] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.191431] CPU: All CPU(s) started in HYP mode. [ 0.191438] CPU: Virtualization extensions available. [ 0.195097] devtmpfs: initialized [ 0.699011] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.701362] omap_hwmod: l3_main_2 using broken dt data from ocp [ 1.090043] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 1.090127] futex hash table entries: 512 (order: 3, 32768 bytes) [ 1.095257] pinctrl core: initialized pinctrl subsystem [ 1.105843] NET: Registered protocol family 16 [ 1.108409] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 1.143429] cpuidle: using governor ladder [ 1.173270] cpuidle: using governor menu [ 1.226074] OMAP GPIO hardware version 0.1 [ 1.254684] GPIO line 161 (radio_rst) hogged as output/low [ 1.272649] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 1.368118] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 1.368211] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 1.429772] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 1.429784] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 1.431703] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 1.431714] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 1.435634] OMAP DMA hardware revision 0.0 [ 1.695133] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 1.700608] edma 43300000.edma: memcpy is disabled [ 1.772105] edma 43300000.edma: TI EDMA DMA engine driver [ 1.795873] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 1.796970] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 1.798033] omap-iommu 58882000.mmu: 58882000.mmu registered [ 1.799145] omap-iommu 55082000.mmu: 55082000.mmu registered [ 1.800537] omap-iommu 41501000.mmu: 41501000.mmu registered [ 1.801632] omap-iommu 41502000.mmu: 41502000.mmu registered [ 1.808280] usbcore: registered new interface driver usbfs [ 1.809009] usbcore: registered new interface driver hub [ 1.809537] usbcore: registered new device driver usb [ 1.820871] palmas 0-0058: IRQ missing: skipping irq request [ 1.837322] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0 [ 1.968437] pcf857x 0-0020: probed [ 1.973177] pcf857x 0-0021: probed [ 1.974480] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.004339] GPIO line 463 (vin6_sel_s0) hogged as output/low [ 2.004369] requesting hog GPIO vin6_sel_s0 (chip pcf8575, offset 1) failed [ 2.005317] pcf857x 1-0026: probed [ 2.010881] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz [ 2.014302] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.044077] pcf857x: probe of 3-0021 failed with error -121 [ 2.044155] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz [ 2.044793] media: Linux media interface: v0.10 [ 2.045191] Linux video capture interface: v2.00 [ 2.045467] pps_core: LinuxPPS API ver. 1 registered [ 2.045476] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.045633] PTP clock support registered [ 2.045930] EDAC MC: Ver: 3.0.0 [ 2.067738] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 2.070438] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 2.074241] Advanced Linux Sound Architecture Driver Initialized. [ 2.121464] DMA-API: preallocated 4096 debug entries [ 2.121476] DMA-API: debugging enabled by kernel config [ 2.121987] clocksource: Switched to clocksource arch_sys_counter [ 2.231311] NET: Registered protocol family 2 [ 2.235063] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 2.235213] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 2.238475] TCP: Hash tables configured (established 8192 bind 8192) [ 2.238797] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 2.239243] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 2.241280] NET: Registered protocol family 1 [ 2.253314] RPC: Registered named UNIX socket transport module. [ 2.253326] RPC: Registered udp transport module. [ 2.253335] RPC: Registered tcp transport module. [ 2.253343] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.257029] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 2.441390] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.458030] NFS: Registering the id_resolver key type [ 2.458320] Key type id_resolver registered [ 2.458331] Key type id_legacy registered [ 2.458681] ntfs: driver 2.1.32 [Flags: R/O]. [ 2.474598] bounce: pool size: 64 pages [ 2.476566] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 2.476649] io scheduler noop registered [ 2.476684] io scheduler deadline registered [ 2.476862] io scheduler cfq registered (default) [ 2.515284] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 2.536755] PCI host bridge /ocp/axi@0/pcie_rc@51000000 ranges: [ 2.536772] No bus range found for /ocp/axi@0/pcie_rc@51000000, using [bus 00-ff] [ 2.536847] IO 0x20003000..0x20012fff -> 0x00000000 [ 2.536996] MEM 0x20013000..0x2fffffff -> 0x20013000 [ 2.589438] dra7-pcie 51000000.pcie_rc: link is not up [ 2.591311] dra7-pcie 51000000.pcie_rc: PCI host bridge to bus 0000:00 [ 2.591342] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.591368] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.591399] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 2.594729] PCI: bus0: Fast back to back transfers disabled [ 2.596033] PCI: bus1: Fast back to back transfers enabled [ 2.596244] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 2.596264] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 2.596337] pci 0000:00:00.0: PCI bridge to [bus 01] [ 2.599070] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 2.641217] fpd3_serdes: probe of 7-002c failed with error -5 [ 2.641274] fpd3_serdes 1-001b: Serializer fpd3_24b_ser ready [ 2.643341] fpd3_serdes 7-002c: Deserializer fpd3_24b_des ready [ 3.222534] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 3.261297] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 301, base_baud = 3000000) is a 8250 [ 4.372522] console [ttyS0] enabled [ 4.382961] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 302, base_baud = 3000000) is a 8250 [ 4.398017] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 303, base_baud = 3000000) is a 8250 [ 4.411246] [drm] Initialized drm 1.1.0 20060810 [ 4.423028] OMAP DSS rev 6.1 [ 4.427864] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 4.440129] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops) [ 4.455666] connector-hdmi connector@1: failed to find video source [ 4.533452] loop: module loaded [ 4.537577] i2c i2c-7: Cannot translate chip addr 0x69 [ 4.549112] nand: No NAND device found [ 4.552982] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch [ 4.581279] m25p80 spi32766.0: s25fl256s1 (32768 Kbytes) [ 4.586818] 7 ofpart partitions found on MTD device spi32766.0 [ 4.594193] Creating 7 MTD partitions on "spi32766.0": [ 4.599391] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 4.616363] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 4.633979] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 4.652101] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 4.670381] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 4.688050] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 4.705740] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 4.727522] libphy: Fixed MDIO Bus: probed [ 4.731686] CAN device driver interface [ 4.744417] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=365) [ 4.801994] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 4.808120] davinci_mdio 48485000.mdio: detected phy mask fffffff3 [ 4.823152] libphy: 48485000.mdio: probed [ 4.827186] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver unknown [ 4.835251] davinci_mdio 48485000.mdio: phy[3]: device 48485000.mdio:03, driver unknown [ 4.845707] cpsw 48484000.ethernet: Detected MACID = a0:f6:fd:b3:4a:64 [ 4.852877] cpsw 48484000.ethernet: cpts: overflow check period 800 [ 4.860234] cpsw 48484000.ethernet: cpsw: Detected MACID = a0:f6:fd:b3:4a:65 [ 4.873468] usbcore: registered new interface driver asix [ 4.879411] usbcore: registered new interface driver ax88179_178a [ 4.893477] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.900162] ehci-pci: EHCI PCI platform driver [ 4.905180] ehci-platform: EHCI generic platform driver [ 4.911348] ehci-omap: OMAP-EHCI Host Controller driver [ 4.919098] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.925442] ohci-pci: OHCI PCI platform driver [ 4.930259] ohci-platform: OHCI generic platform driver [ 4.940289] mousedev: PS/2 mouse device common for all mice [ 4.950279] i2c /dev entries driver [ 4.962776] tvp5158 1-0058: Unable to of_probe [ 4.968334] ov1063x 1-0037: ov1063x 1-0037 sensor driver registered !! [ 4.977914] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin [ 4.986413] =======================vip pid = 0x4f020800 [ 4.991994] ========================instance_id = 1 [ 4.997868] ========================instance_id = 1 [ 5.004751] vpe 489d0000.vpe: Device registered as /dev/video0 [ 5.012076] vip 48970000.vip: loading firmware vpdma-1b8.bin [ 5.023261] i2c i2c-7: Cannot translate chip addr 0x18 [ 5.028433] i2c i2c-7: Cannot translate chip addr 0x19 [ 5.033722] i2c i2c-7: Cannot translate chip addr 0x1a [ 5.038891] i2c i2c-7: Cannot translate chip addr 0x29 [ 5.044096] vip 48970000.vip: VPDMA firmware loaded [ 5.049031] ========================i = 0 [ 5.053267] i2c i2c-7: Cannot translate chip addr 0x2a [ 5.053528] ======================regval = 0 [ 5.053743] vip1-s0: Port A: Using subdev ov1063x 1-0037 for capture [ 5.066473] vip1-s0: device registered as video1 [ 5.073782] i2c i2c-7: Cannot translate chip addr 0x2b [ 5.078950] i2c i2c-7: Cannot translate chip addr 0x48 [ 5.084140] i2c i2c-7: Cannot translate chip addr 0x49 [ 5.089310] i2c i2c-7: Cannot translate chip addr 0x4a [ 5.094492] i2c i2c-7: Cannot translate chip addr 0x4b [ 5.099661] i2c i2c-7: Cannot translate chip addr 0x4c [ 5.104848] i2c i2c-7: Cannot translate chip addr 0x4d [ 5.110015] i2c i2c-7: Cannot translate chip addr 0x4e [ 5.115202] i2c i2c-7: Cannot translate chip addr 0x4f [ 5.120859] i2c i2c-7: Cannot translate chip addr 0x18 [ 5.126050] i2c i2c-7: Cannot translate chip addr 0x19 [ 5.131220] i2c i2c-7: Cannot translate chip addr 0x29 [ 5.136403] i2c i2c-7: Cannot translate chip addr 0x4c [ 5.141569] i2c i2c-7: Cannot translate chip addr 0x4d [ 5.157350] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 5.208833] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 5.215247] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 5.222469] evm_3v3_sw: supplied by sysen1 [ 5.306474] mmc0: MAN_BKOPS_EN bit is not set [ 5.353296] mmc0: new HS200 MMC card at address 0001 [ 5.364379] mmcblk0: mmc0:0001 MMC08G 7.25 GiB [ 5.370871] mmcblk0boot0: mmc0:0001 MMC08G partition 1 8.00 MiB [ 5.379574] mmcblk0boot1: mmc0:0001 MMC08G partition 2 8.00 MiB [ 5.391281] mmcblk0: p1 p2 [ 5.404836] ledtrig-cpu: registered to indicate activity on CPUs [ 5.419962] hwspinlock_user gatemp: requested 10 hwspinlocks [ 5.427697] omap-rproc 58820000.ipu: assigned reserved memory node ipu1_cma@9d000000 [ 5.436136] remoteproc0: 58820000.ipu is available [ 5.441074] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 5.450810] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 5.463175] remoteproc0: Direct firmware load for dra7-ipu1-fw.xem4 failed with error -2 [ 5.463433] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 [ 5.463875] remoteproc1: 55020000.ipu is available [ 5.463879] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 5.463883] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 5.464801] remoteproc1: Direct firmware load for dra7-ipu2-fw.xem4 failed with error -2 [ 5.464830] remoteproc1: failed to load dra7-ipu2-fw.xem4 [ 5.465514] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [ 5.465959] remoteproc2: 40800000.dsp is available [ 5.465963] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 5.465967] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 5.466941] remoteproc2: Direct firmware load for dra7-dsp1-fw.xe66 failed with error -2 [ 5.466968] remoteproc2: failed to load dra7-dsp1-fw.xe66 [ 5.467816] omap-rproc 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000 [ 5.468259] remoteproc3: 41000000.dsp is available [ 5.468263] remoteproc3: Note: remoteproc is still under development and considered experimental. [ 5.468266] remoteproc3: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 5.469266] remoteproc3: Direct firmware load for dra7-dsp2-fw.xe66 failed with error -2 [ 5.469293] remoteproc3: failed to load dra7-dsp2-fw.xe66 [ 5.534346] aic_dvdd: supplied by evm_3v3_sw [ 5.549139] davinci-mcasp 48464000.mcasp: DAI is shared [ 5.565967] davinci-mcasp 48474000.mcasp: DAI is shared [ 5.567008] davinci-mcasp 4847c000.mcasp: invalid tdm slots: 0 [ 5.629976] remoteproc0: failed to load dra7-ipu1-fw.xem4 [ 5.636457] omap-hdmi-audio omap-hdmi-audio.0.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok [ 5.666261] NET: Registered protocol family 10 [ 5.677169] sit: IPv6 over IPv4 tunneling driver [ 5.688393] NET: Registered protocol family 17 [ 5.693474] can: controller area network core (rev 20120528 abi 9) [ 5.702044] NET: Registered protocol family 29 [ 5.706582] can: raw protocol (rev 20120528) [ 5.710965] can: broadcast manager protocol (rev 20120528 t) [ 5.717435] can: netlink gateway (rev 20130117) max_hops=1 [ 5.725968] Key type dns_resolver registered [ 5.730292] NET: Registered protocol family 41 [ 5.735292] omap_voltage_late_init: Voltage driver support not added [ 5.745604] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 5.751837] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 5.762474] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 5.768701] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 5.789287] Power Management for TI OMAP4+ devices. [ 5.794734] Registering SWP/SWPB emulation handler [ 5.803670] kmemleak: Kernel memory leak detector initialized [ 5.803687] kmemleak: Automatic memory scanning thread started [ 5.820753] dmm 4e000000.dmm: initialized all PAT entries [ 6.040870] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 6.046808] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 6.055696] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00210010 [ 6.064809] xhci-hcd xhci-hcd.1.auto: irq 510, io mem 0x48890000 [ 6.079148] hub 1-0:1.0: USB hub found [ 6.083242] hub 1-0:1.0: 1 port detected [ 6.092143] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 6.097719] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 6.105962] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 6.119191] hub 2-0:1.0: USB hub found [ 6.123159] hub 2-0:1.0: 1 port detected [ 6.335495] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 6.341111] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 [ 6.349886] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00210010 [ 6.358910] xhci-hcd xhci-hcd.2.auto: irq 511, io mem 0x488d0000 [ 6.370197] hub 3-0:1.0: USB hub found [ 6.374153] hub 3-0:1.0: 1 port detected [ 6.381029] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 6.386627] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 [ 6.394828] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 6.408829] hub 4-0:1.0: USB hub found [ 6.413245] hub 4-0:1.0: 1 port detected [ 6.420123] tvp5158 1-0058: Unable to of_probe [ 6.427196] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 6.490070] asoc-simple-card sound@0: tlv320aic3x-hifi <-> 48468000.mcasp mapping ok [ 6.545158] asoc-simple-card jamr3_sound: tlv320aic3x-hifi <-> 48474000.mcasp mapping ok [ 6.553546] asoc-simple-card jamr3_sound: ASoC: no source widget found for LLOUT [ 6.560975] asoc-simple-card jamr3_sound: ASoC: Failed to add route LLOUT -> direct -> Line Out [ 6.569751] asoc-simple-card jamr3_sound: ASoC: no source widget found for RLOUT [ 6.577628] asoc-simple-card jamr3_sound: ASoC: Failed to add route RLOUT -> direct -> Line Out [ 6.586402] asoc-simple-card jamr3_sound: ASoC: no sink widget found for LINE1L [ 6.593871] asoc-simple-card jamr3_sound: ASoC: Failed to add route Line In -> direct -> LINE1L [ 6.602639] asoc-simple-card jamr3_sound: ASoC: no sink widget found for LINE1R [ 6.609979] asoc-simple-card jamr3_sound: ASoC: Failed to add route Line In -> direct -> LINE1R [ 6.666479] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.673727] [drm] No driver support for vblank timestamp query. [ 6.679936] omapdrm omapdrm.0: No connectors reported connected with modes [ 6.686977] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.715990] [drm] Enabling DMM ywrap scrolling [ 6.731780] Console: switching to colour frame buffer device 128x48 [ 6.742165] omapdrm omapdrm.0: fb0: omapdrm frame buffer device [ 6.795675] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 [ 6.802203] tvp5158 1-0058: Unable to of_probe [ 6.811795] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 6.820843] tvp5158 1-0058: Unable to of_probe [ 6.825773] hctosys: unable to open rtc device (rtc0) [ 6.903920] aic_dvdd: disabling [ 6.907084] vmmcwl_fixed: disabling [ 6.911034] ALSA device list: [ 6.914063] #0: DRA7xx-EVM [ 6.916951] #1: HDMI 58040000.encoder [ 6.920798] #2: DRA7xx-JAMR3 [ 6.928351] Waiting for root device PARTUUID=1862149d-02... [ 7.569788] mmc2: host does not support reading read-only switch, assuming write-enable [ 7.579975] mmc2: new high speed SDHC card at address 0001 [ 7.588206] mmcblk1: mmc2:0001 SD8GB 7.28 GiB [ 7.596932] mmcblk1: p1 p2 [ 7.605360] tvp5158 1-0058: Unable to of_probe [ 8.650030] EXT4-fs (mmcblk1p2): recovery complete [ 8.658944] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 8.668475] VFS: Mounted root (ext4 filesystem) on device 179:50. [ 8.677406] devtmpfs: mounted [ 8.681474] Freeing unused kernel memory: 1016K (c0a8e000 - c0b8c000) [ 8.688027] This architecture does not have kernel memory protection. [ 8.940094] systemd[1]: System time before build time, advancing clock. [ 9.012113] random: systemd: uninitialized urandom read (16 bytes read, 31 bits of entropy available) [ 9.032565] random: systemd: uninitialized urandom read (16 bytes read, 31 bits of entropy available) [ 9.106571] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 9.127857] systemd[1]: Detected architecture arm. Welcome to Arago 2016.08! [ 9.154328] systemd[1]: Set hostname to . [ 9.327261] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 33 bits of entropy available) [ 9.360212] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 33 bits of entropy available) [ 9.371309] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 33 bits of entropy available) [ 9.387024] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 33 bits of entropy available) [ 9.428396] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 35 bits of entropy available) [ 9.546362] random: systemd: uninitialized urandom read (16 bytes read, 37 bits of entropy available) [ 9.556881] random: systemd: uninitialized urandom read (16 bytes read, 37 bits of entropy available) [ 9.571105] random: systemd: uninitialized urandom read (16 bytes read, 37 bits of entropy available) [ 10.459651] systemd[1]: sysinit.target: Found ordering cycle on sysinit.target/start [ 10.467534] systemd[1]: sysinit.target: Found dependency on alignment.service/start [ 10.476605] systemd[1]: sysinit.target: Found dependency on basic.target/start [ 10.483943] systemd[1]: sysinit.target: Found dependency on sockets.target/start [ 10.491391] systemd[1]: sysinit.target: Found dependency on rpcbind.socket/start [ 10.498908] systemd[1]: sysinit.target: Found dependency on sysinit.target/start [ 10.506624] systemd[1]: sysinit.target: Breaking ordering cycle by deleting job alignment.service/start [ 10.516138] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with sysinit.target/start [ SKIP ] Ordering cycle found, skipping alignment.service [ 10.557520] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 10.593188] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 10.623190] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 10.652987] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 10.682691] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 10.712915] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 10.752542] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 10.802027] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 10.836943] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 10.862796] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 10.893126] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 10.923035] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 10.992831] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 11.036774] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ 11.076787] systemd[1]: Starting Create Static Device Nodes in /dev... Starting Create Static Device Nodes in /dev... [ 11.128641] systemd[1]: Mounting Temporary Directory... Mounting Temporary Directory... [ 11.152765] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 11.232656] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 11.279983] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 11.309704] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 11.343169] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 11.373331] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 11.453288] systemd[1]: Starting Journal Service... Starting Journal Service... [ 11.496155] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 11.528941] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 11.618745] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) [ 11.719316] systemd[1]: Mounted Debug File System. [ OK ] Mounted Debug File System. [ 11.752904] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 11.783593] systemd[1]: Mounted Temporary Directory. [ OK ] Mounted Temporary Directory. [ 11.824801] systemd[1]: Started Setup Virtual Console. [ OK ] Started Setup Virtual Console. [ 11.862718] systemd[1]: Started Create Static Device Nodes in /dev. [ OK ] Started Create Static Device Nodes in /dev. [ 11.895346] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE [ 11.916648] systemd[1]: Failed to start Load Kernel Modules. [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ 11.973309] systemd[1]: systemd-modules-load.service: Unit entered failed state. [ 11.980765] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'. [ 11.994282] systemd[1]: Started Remount Root and Kernel File Systems. [ OK ] Started Remount Root and Kernel File Systems. [ 12.024727] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. Starting udev Coldplug all Devices... Starting Flush Journal to Persistent Storage... Starting Apply Kernel Variables... Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Apply Kernel Variables. [ 13.160879] systemd-journald[160]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Started Load/Save Random Seed. [ OK ] Started Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. Starting Synchronize System and HW clocks... [ OK ] Reached target System Time Synchronized. [FAILED] Failed to start Synchronize System and HW clocks. See 'systemctl status sync-clocks.service' for details. [ OK ] Found device /dev/ttyS0. [ OK ] Started udev Coldplug all Devices. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on dropbear.socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting uim-sysfs.service... [ OK ] Started Kernel Logging Service. [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. Starting Print notice about GPLv3 packages... Starting Login Service... Starting Permit User Sessions... [ OK ] Started D-Bus System Message Bus. [ 19.632431] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 19.641474] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 19.983606] EXT4-fs (mmcblk0p2): recovery complete [ 20.025548] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) Starting Network Service... Starting Avahi mDNS/DNS-SD Stack... Starting Telephony service... Starting Save/Restore Sound Card State... [ OK ] Started System Logging Service. [ 21.334884] net eth0: initializing cpsw version 1.15 (0) [ 21.357720] (null): initialized cpsw ale version 1.4 [ 21.450330] (null): ALE Table size 1024 [ 21.485274] tvp5158 1-0058: Unable to of_probe [ OK ] Started Network Service. [ OK ] Started Permit User Sessions. [ 21.569311] net eth0: phy found : id is : 0x20005c7a [ 21.627921] random: nonblocking pool is initialized [ OK ] Started Save/Restore Sound Card State. [ 21.723576] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.589656] cpsw 48484000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 23.609810] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf binutils-dev binutils bison-dev bison cpp-symlinks cpp dosfstools g++-symlinks g++ gawk-dev gawk gcc-symlinks gcc gdb gdbc6x gdbserver gstreamer1.0-libav libcairo-perf-utils libgmp10 libidn11 libmpc3 libmpfr4 make nettle parted swig-dev swig If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Telephony service. [ OK ] Started Login Service. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Reached target Sound Card. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Network. Starting Lightning Fast Webserver With Light System Requirements... Starting Network Name Resolution... [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started Network Name Resolution. [ OK ] Started uim-sysfs.service. Starting rc.pvr.service... [ OK ] Started rc.pvr.service. Starting weston.service... [ OK ] Started weston.service. Starting tiipclad-daemon.service... Starting telnetd.service... [ OK ] Started telnetd.service. [ OK ] Started tiipclad-daemon.service. Starting thttpd.service... [ OK ] Started thttpd.service. Starting rng-tools.service... [ OK ] Started rng-tools.service. Starting gdbserverproxy.service... [ OK ] Started gdbserverproxy.service. Starting matrix-gui-2.0.service... [ OK ] Started matrix-gui-2.0.service. Starting thermal-zone-init.service... [ OK ] Started thermal-zone-init.service. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dra7xx-evm ttyS0 Arago 2016.08 dra7xx-evm ttyS0 dra7xx-evm login: