barebox 2017.02.0 #1 Tue Mar 7 12:32:20 CET 2017 Board: IPCOMM SEC3 cpsw 4a100000.ethernet: detected phy mask 0xa mdio_bus: miibus0: probed eth0: got preset MAC address: 98:5d:ad:45:74:88 eth1: got preset MAC address: 98:5d:ad:45:74:8a nand: ONFI flash detected nand: NAND device: Manufacturer ID: 0x01, Chip ID: 0xdc (AMD/Spansion S34ML04G1), 512MiB, page size: 2048, OOB size: 64 booting from NAND barebox 2017.02.0 #1 Tue Mar 7 12:32:09 CET 2017 Board: IPCOMM SEC3 cpsw 4a100000.ethernet: detected phy mask 0xa mdio_bus: miibus0: probed eth0: got preset MAC address: 98:5d:ad:45:74:88 eth1: got preset MAC address: 98:5d:ad:45:74:8a am335x-phy-driver 47401b00.usb-phy: am_usbphy 87ff2364 enabled musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory i2c-omap 44e0b000.i2c: bus 0 rev0.11 at 400 kHz i2c-omap 4802a000.i2c: bus 1 rev0.11 at 400 kHz i2c-omap 4819c000.i2c: bus 2 rev0.11 at 400 kHz omap_wdt 44e35000.wdt: OMAP Watchdog Timer Rev 0x01 nand: ONFI flash detected nand: NAND device: Manufacturer ID: 0x01, Chip ID: 0xdc (AMD/Spansion S34ML04G1), 512MiB, page size: 2048, OOB size: 64 netconsole: registered as netconsole-1 malloc space: 0x87f7ef60 -> 0x8fefdebf (size 127.5 MiB) environment load /dev/env0: No such file or directory Maybe you have to create the partition. running /env/bin/init... Hit m for menu or any other key to stop autoboot: 0 booting 'nand' Loading ARM Linux zImage '/dev/nand0.kernel.bb' commandline: console=ttyO0,115200n8 root=ubi0:root ubi.mtd=root rw rootfstype=ubifs mtdparts=omap2-nand.0:128k(xload)ro,128k(xload_backup1)ro,128k(xload_backup2)ro,128k(xload_backup3)ro,512k(barebox)ro,256k(bareboxenv),256k(oftree)ro,8M(kernel),-(root) [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.32-gadde2ca9f8 (gtbldadm@ubuntu-16) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 PREEMPT Wed Dec 14 18:52:13 EST 2016 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: IPCOMM SEC3 [ 0.000000] cma: Reserved 48 MiB at 0x8d000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (neon ) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64960 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=ubi0:root ubi.mtd=root rw rootfstype=ubifs mtdparts=omap2-nand.0:128k(xload)ro,128k(xload_backup1)ro,128k(xload_backup2)ro,128k(xload_backup3)ro,512k(barebox)ro,256k(bareboxenv),256k(oftree)ro,8M(kernel),-(root) [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 200296K/262144K available (6595K kernel code, 316K rwdata, 2412K rodata, 268K init, 265K bss, 12696K reserved, 49152K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08d4004 (9009 kB) [ 0.000000] .init : 0xc08d5000 - 0xc0918000 ( 268 kB) [ 0.000000] .data : 0xc0918000 - 0xc0967370 ( 317 kB) [ 0.000000] .bss : 0xc0967370 - 0xc09a9a98 ( 266 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 25000000 Hz [ 0.000014] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns [ 0.000038] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns [ 0.000050] OMAP clocksource: timer1 at 25000000 Hz [ 0.000214] clocksource_probe: no matching clocksources found [ 0.000402] Console: colour dummy device 80x30 [ 0.000436] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.000443] This ensures that you still see kernel messages. Please [ 0.000449] update your kernel commandline. [ 0.000467] Calibrating delay loop... 718.02 BogoMIPS (lpj=3590144) [ 0.119124] pid_max: default: 32768 minimum: 301 [ 0.119259] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.119272] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.120002] Initializing cgroup subsys io [ 0.120036] Initializing cgroup subsys memory [ 0.120074] Initializing cgroup subsys devices [ 0.120091] Initializing cgroup subsys freezer [ 0.120106] Initializing cgroup subsys perf_event [ 0.120121] Initializing cgroup subsys pids [ 0.120152] CPU: Testing write buffer coherency: ok [ 0.120556] Setting up static identity map for 0x80008200 - 0x80008258 [ 0.122905] devtmpfs: initialized [ 0.134445] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.149352] omap_hwmod: debugss: _wait_target_disable failed [ 0.179227] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.183287] pinctrl core: initialized pinctrl subsystem [ 0.184709] NET: Registered protocol family 16 [ 0.187045] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.209126] cpuidle: using governor ladder [ 0.239114] cpuidle: using governor menu [ 0.243770] OMAP GPIO hardware version 0.1 [ 0.251905] omap-gpmc 50000000.gpmc: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/nandflash_pins_s0, deferring probe [ 0.253578] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.298066] edma 49000000.edma: TI EDMA DMA engine driver [ 0.301585] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe [ 0.301647] omap_i2c 4802a000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c1_pins, deferring probe [ 0.301686] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe [ 0.301805] media: Linux media interface: v0.10 [ 0.301883] Linux video capture interface: v2.00 [ 0.301936] pps_core: LinuxPPS API ver. 1 registered [ 0.301944] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.301975] PTP clock support registered [ 0.302034] EDAC MC: Ver: 3.0.0 [ 0.303096] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 0.303458] Advanced Linux Sound Architecture Driver Initialized. [ 0.304681] clocksource: Switched to clocksource timer1 [ 0.316610] NET: Registered protocol family 2 [ 0.317446] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.317488] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 0.317519] TCP: Hash tables configured (established 2048 bind 2048) [ 0.317596] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.317617] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.317787] NET: Registered protocol family 1 [ 0.318208] RPC: Registered named UNIX socket transport module. [ 0.318224] RPC: Registered udp transport module. [ 0.318231] RPC: Registered tcp transport module. [ 0.318238] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.319186] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 0.321155] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.330001] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.331078] NFS: Registering the id_resolver key type [ 0.331149] Key type id_resolver registered [ 0.331158] Key type id_legacy registered [ 0.331250] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.335261] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.335291] io scheduler noop registered [ 0.335305] io scheduler deadline registered [ 0.335497] io scheduler cfq registered (default) [ 0.336756] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.405783] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.410042] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250 [ 1.056704] console [ttyS0] enabled [ 1.061224] [drm] Initialized drm 1.1.0 20060810 [ 1.073986] loop: module loaded [ 1.081579] libphy: Fixed MDIO Bus: probed [ 1.144757] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.150899] davinci_mdio 4a101000.mdio: detected phy mask fffffff5 [ 1.158658] libphy: 4a101000.mdio: probed [ 1.162706] davinci_mdio 4a101000.mdio: phy[1]: device 4a101000.mdio:01, driver SMSC LAN8710/LAN8720 [ 1.171986] davinci_mdio 4a101000.mdio: phy[3]: device 4a101000.mdio:03, driver SMSC LAN8710/LAN8720 [ 1.181960] cpsw 4a100000.ethernet: Detected MACID = 98:5d:ad:45:74:88 [ 1.188825] cpsw 4a100000.ethernet: cpts: overflow check period 850 [ 1.196081] cpsw 4a100000.ethernet: cpsw: Detected MACID = 98:5d:ad:45:74:8a [ 1.204870] mousedev: PS/2 mouse device common for all mice [ 1.211126] i2c /dev entries driver [ 1.216448] ledtrig-cpu: registered to indicate activity on CPUs [ 1.225588] NET: Registered protocol family 10 [ 1.231617] sit: IPv6 over IPv4 tunneling driver [ 1.237223] NET: Registered protocol family 17 [ 1.242017] Key type dns_resolver registered [ 1.246670] omap_voltage_late_init: Voltage driver support not added [ 1.253354] cpu cpu0: OPP-v2 not supported, cpufreq-dt will attempt to use legacy tables. [ 1.265494] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 1.270682] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 1.278351] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xdc [ 1.284844] nand: AMD/Spansion S34ML04G1 [ 1.288790] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 1.296446] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme [ 1.301878] 9 ofpart partitions found on MTD device 8000000.nand [ 1.307934] Creating 9 MTD partitions on "8000000.nand": [ 1.313277] 0x000000000000-0x000000020000 : "xload" [ 1.319704] 0x000000020000-0x000000040000 : "xload_backup1" [ 1.326646] 0x000000040000-0x000000060000 : "xload_backup2" [ 1.333491] 0x000000060000-0x000000080000 : "xload_backup3" [ 1.340416] 0x000000080000-0x000000100000 : "barebox" [ 1.346883] 0x000000100000-0x000000140000 : "bareboxenv" [ 1.353416] 0x000000140000-0x000000180000 : "oftree" [ 1.359737] 0x000000180000-0x000000980000 : "kernel" [ 1.368931] 0x000000980000-0x000020000000 : "root" [ 1.566026] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.572620] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 400 kHz [ 1.579213] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 400 kHz [ 1.585244] ubi0: attaching mtd8 [ 2.694646] ubi0: scanning is finished [ 2.711347] ubi0: attached mtd8 (name "root", size 502 MiB) [ 2.717074] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes [ 2.723982] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512 [ 2.730730] ubi0: VID header offset: 512 (aligned 512), data offset: 2048 [ 2.737561] ubi0: good PEBs: 4020, bad PEBs: 0, corrupted PEBs: 0 [ 2.743680] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 2.750947] ubi0: max/mean erase counter: 98/43, WL threshold: 4096, image sequence number: 15048 [ 2.759933] ubi0: available PEBs: 2, total reserved PEBs: 4018, PEBs reserved for bad PEB handling: 80 [ 2.769313] ubi0: background thread "ubi_bgt0d" started, PID 60 [ 2.775645] hctosys: unable to open rtc device (rtc0) [ 2.784668] ALSA device list: [ 2.787805] No soundcards found. [ 2.804729] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 61 [ 2.868907] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "root" [ 2.876228] UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 2.886207] UBIFS (ubi0:0): FS size: 506161152 bytes (482 MiB, 3923 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs) [ 2.896962] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 2.902828] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 5C92C47F-602E-4165-ABDC-80E9630027A9, small LPT model [ 2.915983] VFS: Mounted root (ubifs filesystem) on device 0:14. [ 2.922860] devtmpfs: mounted [ 2.926258] Freeing unused kernel memory: 268K (c08d5000 - c0918000) [ 2.932639] This architecture does not have kernel memory protection. [ 3.135061] systemd[1]: System time before build time, advancing clock. [ 3.198288] random: systemd: uninitialized urandom read (16 bytes read, 4 bits of entropy available) [ 3.229525] random: systemd: uninitialized urandom read (16 bytes read, 4 bits of entropy available) [ 3.250474] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 3.270083] systemd[1]: Detected architecture arm. Welcome to Arago 2016.10! [ 3.297155] systemd[1]: Set hostname to . [ 3.477298] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 5 bits of entropy available) [ 3.508032] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 5 bits of entropy available) [ 3.564512] random: systemd: uninitialized urandom read (16 bytes read, 5 bits of entropy available) [ 3.624610] random: systemd: uninitialized urandom read (16 bytes read, 5 bits of entropy available) [ 3.634447] random: systemd: uninitialized urandom read (16 bytes read, 5 bits of entropy available) [ 3.644840] random: systemd: uninitialized urandom read (16 bytes read, 5 bits of entropy available) [ 3.708118] random: systemd: uninitialized urandom read (16 bytes read, 5 bits of entropy available) [ 3.740353] random: systemd: uninitialized urandom read (16 bytes read, 5 bits of entropy available) [ 3.993769] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 4.025327] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 4.056382] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 4.085364] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 4.143476] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 4.166497] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.195464] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 4.225058] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 4.245049] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 4.267158] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 4.295218] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 4.315616] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 4.353306] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 4.427783] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ 4.526230] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ 4.570480] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 4.668288] systemd[1]: Mounting Temporary Directory... Mounting Temporary Directory... [ 4.727112] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 4.755554] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 4.790237] systemd[1]: Starting Journal Service... Starting Journal Service... [ 4.826501] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 4.850750] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 4.895402] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 4.925739] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 4.970392] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 5.063771] systemd[1]: Mounted Debug File System. [ OK ] Mounted Debug File System. [ 5.105529] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 5.125503] systemd[1]: Mounted Temporary Directory. [ OK ] Mounted Temporary Directory. [ 5.156149] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started Setup Virtual Console. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Apply Kernel Variables. Starting udev Coldplug all Devices... Starting Create Static Device Nodes in /dev... Starting Flush Journal to Persistent Storage... [ OK ] Started Create Static Device Nodes in /dev. [ 6.701651] systemd-journald[98]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... Starting Load/Save Random Seed... [ OK ] Started udev Coldplug all Devices. [ 8.560897] omap_rtc 44e3e000.rtc: already running [ OK ] Started Create Volatile Files and Directories. [ OK ] Started Load/Save Random Seed. [ 8.658253] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 8.747111] 47401b00.usb-phy supply vcc not found, using dummy regulator [ 8.909068] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ OK ] Found device /dev/ttyS0. [ 9.022658] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 [ 9.468097] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 Starting Update UTMP about System Boot/Shutdown... Starting Network Time Synchronization... [ 10.732608] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 10.922134] remoteproc0: wkup_m3 is available [ 10.931342] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 11.057434] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 11.123142] PM: Cannot get wkup_m3_ipc handle [ 11.162923] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 11.218628] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ OK ] Started Network Time Synchronization. [ 11.278870] PM: Cannot get wkup_m3_ipc handle [ 11.315936] PM: am33xx_prepare_push_sram_idle: EMIF function copy failed [ 11.417589] remoteproc0: powering up wkup_m3 [ 11.422955] remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217280 [ 11.585123] remoteproc0: remote processor wkup_m3 is now up [ 11.585148] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192 [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Found device /dev/ttyS3. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Reached target System Time Synchronized. Starting Synchronize System and HW clocks... [ OK ] Started Synchronize System and HW clocks. [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting telnetd.service... Starting Permit User Sessions... [ OK ] Started System Logging Service. Starting Login Service... [ OK ] Started D-Bus System Message Bus. Starting Print notice about GPLv3 packages... Starting Network Service... [ OK ] Started Kernel Logging Service. [ OK ] Started telnetd.service. [ OK ] Started Permit User Sessions. [ 15.159735] usbcore: registered new interface driver usbfs [ 15.241327] usbcore: registered new interface driver hub [ 15.296645] usbcore: registered new device driver usb [ 15.513237] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver [ 15.559912] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1 [ 15.600844] hub 1-0:1.0: USB hub found [ 15.616985] hub 1-0:1.0: 1 port detected [ 15.648826] PM: am33xx_prepare_push_sram_idle: EMIF function copy failed [ 15.669924] PM: am33xx_prepare_push_sram_idle: EMIF function copy failed [ 15.710308] PM: am33xx_prepare_push_sram_idle: EMIF function copy failed [ OK ] Started Network Service. [ 16.077213] net eth1: initializing cpsw version 1.12 (0) [ 16.082607] net eth0: initialized cpsw ale version 1.4 [ 16.106710] net eth0: ALE Table size 1024 [ 16.114221] net eth1: phy found : id is : 0x7c0f1 [ 16.171477] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 16.233090] net eth0: initializing cpsw version 1.12 (0) [ 16.251618] net eth0: phy found : id is : 0x7c0f1 [ 16.291056] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ OK ] Reached target Network. Starting Network Name Resolution... [ OK ] Started Serial Getty on ttyS3. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS0. Starting thttpd.service... [ OK ] Started Login Service. *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: binutils dosfstools m4 If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started thttpd.service. [ OK ] Started Print notice about GPLv3 packages. [ 19.132737] cpsw 4a100000.ethernet eth1: Link is Up - 100Mbps/Full - flow control rx/tx [ 19.164909] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ OK ] Started Network Name Resolution. Starting rng-tools.service... [ OK ] Started rng-tools.service. Starting thermal-zone-init.service... [ OK ] Started thermal-zone-init.service. [ 20.285528] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 20.293732] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready _____ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| _| |__,|_ |___| |__| |_| |___|_| |___|___|_| p://arago-project.org am335x-evm ttyS0 Arago 2016.10 am335x-evm ttyS0 oject.org am335x-evm ttyS0 Arago 2016.10 am335x-evm ttyS0 am335x-evm login: