arch=arm
args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts}
args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype}
args_usb=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype}
avb_verify=avb init ${mmcdev}; avb verify $slot_suffix;
baudrate=115200
board=am62x
board_name=am62x_skevm
board_rev=E3
board_serial=0186
board_software_revision=01
boot=mmc
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi
boot_efi_bootmgr=if fdt addr ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr;fi
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf}
boot_fdt=try
boot_net_usb_start=usb start
boot_prefixes=/ /boot/
boot_script_dhcp=boot.scr.uimg
boot_scripts=boot.scr.uimg boot.scr
boot_syslinux_conf=extlinux/extlinux.conf
boot_targets=linux fastboot recovery system panic
bootcmd=run distro_bootcmd
bootcmd_fastboot=if test "${android_boot}" -eq 1; then;setenv run_fastboot 0;if gpt verify mmc ${mmcdev} ${partitions}; then; else echo Broken MMC partition scheme;setenv run_fastboot 1;fi; if test "${run_fastboot}" -eq 0; then if bcb load 0 misc; then if bcb test command = bootonce-bootloader; then echo BCB: Bootloader boot...; bcb clear command; bcb store; setenv run_fastboot 1;elif bcb test command = boot-fastboot; then echo BCB: fastboot userspace boot...; setenv force_recovery 1;fi; else echo Warning: BCB is corrupted or does not exist; fi;fi;if test "${run_fastboot}" -eq 1; then echo Running Fastboot...;fastboot 0; fi;fi
bootcmd_linux=if test "${android_boot}" -eq 0; then;run findfdt; run envboot;run init_${boot}; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern;fi
bootcmd_panic=if test "${android_boot}" -eq 1; then;fastboot 0; reset;fi
bootcmd_recovery=if test "${android_boot}" -eq 1; then;setenv run_recovery 0;if bcb load 0 misc; then if bcb test command = boot-recovery; then; echo BCB: Recovery boot...; setenv run_recovery 1;fi;else echo Warning: BCB is corrupted or does not exist; fi;if test "${skip_recovery}" -eq 1; then echo Recovery skipped by environment;setenv run_recovery 0;fi;if test "${force_recovery}" -eq 1; then echo Recovery forced by environment;setenv run_recovery 1;fi;if test "${run_recovery}" -eq 1; then echo Running Recovery...;mmc dev ${mmcdev};setenv bootargs "${bootargs} androidboot.serialno=${serial#}";run get_current_slot; if test -e "${current_slot}"; then setenv slot_suffix _${current_slot}; else echo current_slot not found;exit;fi;setenv bootargs_ab androidboot.slot_suffix=${slot_suffix}; echo A/B cmdline addition: ${bootargs_ab};setenv bootargs ${bootargs} ${bootargs_ab};if test "${force_avb}" -eq 1; then if run avb_verify; then echo AVB verification OK.;setenv bootargs "$bootargs $avb_bootargs";else echo AVB verification failed.;exit; fi;else setenv bootargs "$bootargs androidboot.verifiedbootstate=orange";echo Running without AVB...; fi;part start mmc ${mmcdev} boot${slot_suffix} boot_start;part size mmc ${mmcdev} boot${slot_suffix} boot_size;if mmc read ${loadaddr} ${boot_start} ${boot_size}; then echo Preparing FDT...; if test $board_name = am62x_skevm; then echo "  Reading DTB for am62x_skevm..."; setenv dtb_index 0;else echo Error: Android boot is not supported for $board_name; exit; fi; abootimg get dtb --index=$dtb_index dtb_start dtb_size; cp.b $dtb_start $fdt_addr_r $dtb_size; fdt addr $fdt_addr_r  0x80000; echo Running Android Recovery...;bootm ${loadaddr} ${loadaddr} ${fdt_addr_r};fi;echo Failed to boot Android...;reset;fi;fi
bootcmd_system=if test "${android_boot}" -eq 1; then;echo Loading Android boot partition...;mmc dev ${mmcdev};setenv bootargs ${bootargs} androidboot.serialno=${serial#};run get_current_slot; if test -e "${current_slot}"; then setenv slot_suffix _${current_slot}; else echo current_slot not found;exit;fi;setenv bootargs_ab androidboot.slot_suffix=${slot_suffix}; echo A/B cmdline addition: ${bootargs_ab};setenv bootargs ${bootargs} ${bootargs_ab};if test "${force_avb}" -eq 1; then if run avb_verify; then echo AVB verification OK.;setenv bootargs "$bootargs $avb_bootargs";else echo AVB verification failed.;exit; fi;else setenv bootargs "$bootargs androidboot.verifiedbootstate=orange";echo Running without AVB...; fi;part start mmc ${mmcdev} boot${slot_suffix} boot_start;part size mmc ${mmcdev} boot${slot_suffix} boot_size;if mmc read ${loadaddr} ${boot_start} ${boot_size}; then echo Preparing FDT...; if test $board_name = am62x_skevm; then echo "  Reading DTB for am62x_skevm..."; setenv dtb_index 0;else echo Error: Android boot is not supported for $board_name; exit; fi; abootimg get dtb --index=$dtb_index dtb_start dtb_size; cp.b $dtb_start $fdt_addr_r $dtb_size; fdt addr $fdt_addr_r  0x80000; setenv bootargs "${bootargs}  androidboot.force_normal_boot=1"  ; echo Running Android...;bootm ${loadaddr} ${loadaddr} ${fdt_addr_r};fi;echo Failed to boot Android...;fi
bootdelay=2
bootdir=/boot
bootenvfile=uEnv.txt
bootm_size=0x10000000
bootpart=1:2
bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr}
console=ttyS2,115200n8
cpu=armv8
default_device_tree=k3-am625-sk.dtb
dfu_alt_info_emmc=rawemmc raw 0 0x800000 mmcpart 1;rootfs part 0 1 mmcpart 0;tiboot3.bin.raw raw 0x0 0x400 mmcpart 1;tispl.bin.raw raw 0x400 0x1000 mmcpart 1;u-boot.img.raw raw 0x1400 0x2000 mmcpart 1;u-env.raw raw 0x3400 0x100 mmcpart 1;sysfw.itb.raw raw 0x3600 0x800 mmcpart 1
dfu_alt_info_mmc=boot part 1 1;rootfs part 1 2;tiboot3.bin fat 1 1;tispl.bin fat 1 1;u-boot.img fat 1 1;uEnv.txt fat 1 1;sysfw.itb fat 1 1
dfu_alt_info_ospi=tiboot3.bin raw 0x0 0x080000;tispl.bin raw 0x080000 0x200000;u-boot.img raw 0x280000 0x400000;u-boot-env raw 0x680000 0x020000;sysfw.itb raw 0x6c0000 0x100000;rootfs raw 0x800000 0x3800000
dfu_alt_info_ram=tispl.bin ram 0x80080000 0x200000;u-boot.img ram 0x81000000 0x400000
distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
dtboaddr=0x89000000
efi_dtb_prefixes=/ /dtb/ /dtb/current/
envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev};if run loadbootscript; then run bootscript;else if run loadbootenv; then echo Loaded env from ${bootenvfile};run importbootenv;fi;if test -n $uenvcmd; then echo Running uenvcmd ...;run uenvcmd;fi;fi;fi;
eth1addr=70:ff:76:1e:a4:b1
ethaddr=f4:84:4c:fc:12:90
fdt_addr_r=0x88000000
fdtaddr=0x88000000
fdtcontroladdr=f7eeee40
findfdt=setenv name_fdt ${default_device_tree};setenv fdtfile ${name_fdt}
finduuid=part uuid ${boot} ${bootpart} uuid
get_current_slot=if part number mmc ${mmcdev} misc control_part_number; then echo misc partition number:${control_part_number};ab_select current_slot mmc ${mmcdev}:${control_part_number};else echo misc partition not found;fi;
get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}
get_fdt_usb=load usb ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}
get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit}
get_fit_usb=load usb ${bootpart} ${addr_fit} ${bootdir}/${name_fit}
get_kern_mmc=load mmc ${bootpart} ${loadaddr} ${bootdir}/${name_kern}
get_kern_usb=load usb ${bootpart} ${loadaddr} ${bootdir}/${name_kern}
get_overlay_mmc=fdt address ${fdtaddr};fdt resize 0x100000;for overlay in $name_overlays;do;load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply ${dtboaddr};done;
get_overlay_usb=fdt address ${fdtaddr};fdt resize 0x100000;for overlay in $name_overlays;do;load usb ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply ${dtboaddr};done;
importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize}
init_mmc=run args_all args_mmc
init_usb=run args_all args_usb
kernel_addr_r=0x82000000
load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile}
loadaddr=0x82000000
loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}
loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr
loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}
loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}
mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi
mmcboot=mmc dev ${mmcdev}; devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev};if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados;fi;fi;fi;
mmcdev=1
mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;
mmcrootfstype=ext4 rootwait
name_kern=Image
partitions=uuid_disk=${uuid_gpt_disk};name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}
partitions_android=uuid_disk=${uuid_gpt_disk};name=bootloader,start=5M,size=8M,uuid=${uuid_gpt_bootloader};name=tiboot3,start=4M,size=1M,uuid=${uuid_gpt_tiboot3};name=uboot-env,start=13M,size=512K,uuid=${uuid_gpt_env};name=misc,start=13824K,size=512K,uuid=${uuid_gpt_misc};name=boot_a,size=40M,uuid=${uuid_gpt_boot_a};name=boot_b,size=40M,uuid=${uuid_gpt_boot_b};name=dtbo_a,size=8M,uuid=${uuid_gpt_dtbo_a};name=dtbo_b,size=8M,uuid=${uuid_gpt_dtbo_b};name=vbmeta_a,size=64K,uuid=${uuid_gpt_vbmeta_a};name=vbmeta_b,size=64K,uuid=${uuid_gpt_vbmeta_b};name=super,size=4608M,uuid=${uuid_gpt_super};name=metadata,size=16M,uuid=${uuid_gpt_metadata};name=userdata,size=-,uuid=${uuid_gpt_userdata}
pxefile_addr_r=0x80100000
ramdisk_addr_r=0x88080000
rd_spec=-
rdaddr=0x88080000
run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done; setenv devplist
scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;run boot_efi_bootmgr;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scriptaddr=0x80000000
serial#=0000000000000186
set_android_boot=setenv android_boot 1;setenv partitions $partitions_android;setenv mmcdev 0;setenv force_avb 0;saveenv;
soc=k3
stderr=serial@2800000
stdin=serial@2800000
stdout=serial@2800000
usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi
usbboot=setenv boot usb;setenv bootpart 0:2;usb start;run findfdt;run init_usb;run get_kern_usb;run get_fdt_usb;run run_kern
vendor=ti