U-Boot SPL 2016.05 (Aug 25 2017 - 18:28:15) DRA752-GP ES2.0 @SD max clock = 20000000@ MMC Device 1 not found *** Warning - No MMC card found, using default environment Trying to boot from MMC1 MMC Device 1 not found *** Warning - No MMC card found, using default environment reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2016.05 (Aug 25 2017 - 18:28:15 +0800) CPU : DRA752-GP ES2.0 Model: TI DRA742 Board: DRA74x EVM REV DRAM: 256 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 ** First descriptor is NOT a primary desc on 1:1 ** *** Warning - bad CRC, using default environment Warning: fastboot.board_rev: unknown board revision GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid GPT *** GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid Backup GPT *** ERROR: cannot find partition: 'userdata' at arch/arm/cpu/armv7/omap-common/utils.c:195/mmc_get_part_size() Warning: fastboot.userdata_size: unable to calc SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: Warning: ethernet@48484000 using MAC address from ROM eth0: ethernet@48484000 @ADAPTER@ Hit any key to stop autoboot: 0 @SD max clock = 20000000@ switch to partitions #0, OK mmc0 is current device @SD max clock = 20000000@ SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 222 bytes read in 3 ms (72.3 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... @SD max clock = 20000000@ switch to partitions #0, OK mmc0 is current device @SD max clock = 20000000@ SD/MMC found on device 0 3621784 bytes read in 420 ms (8.2 MiB/s) 109634 bytes read in 64 ms (1.6 MiB/s) Booting from mmc0 ... Kernel image @ 0x82000000 [ 0x000000 - 0x374398 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8eee1000, end 8eefec41 ... OK i2c_write: error waiting for data ACK (status=0x116) Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.45 (hsuyz@hsuyz-VirtualBox) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 SMP PREEMPT Fri Aug 25 18:31:15 CST 2017 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA742 [ 0.000000] cma: Reserved 64 MiB at 0x000000008ac00000 [ 0.000000] Forcing write-allocate cache policy for SMP [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] DRA752 ES2.0 [ 0.000000] PERCPU: Embedded 11 pages/cpu @cfb18000 s14848 r8192 d22016 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64448 [ 0.000000] Kernel command line: console=ttyO3,115200n8 elevator=noop root=PARTUUID=84346fd0-02 rw rootwait earlyprintk fixrtc omapdrm.num_crtc=2 consoleblank=0 cma=64M rootfstype=ext4 snd.slots_reserved=1,1 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 181188K/260096K available (6611K kernel code, 363K rwdata, 2464K rodata, 336K init, 290K bss, 13372K reserved, 65536K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08e509c (9077 kB) [ 0.000000] .init : 0xc08e6000 - 0xc093a000 ( 336 kB) [ 0.000000] .data : 0xc093a000 - 0xc0994f10 ( 364 kB) [ 0.000000] .bss : 0xc0996000 - 0xc09de800 ( 290 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000004] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000015] Switching to timer-based delay loop, resolution 162ns [ 0.000330] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000338] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000803] Console: colour dummy device 80x30 [ 0.000823] WARNING: Your 'console=ttyO3' has been replaced by 'ttyS3' [ 0.000829] This ensures that you still see kernel messages. Please [ 0.000834] update your kernel commandline. [ 0.000846] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000859] pid_max: default: 32768 minimum: 301 [ 0.000955] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000964] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001546] Initializing cgroup subsys io [ 0.001564] Initializing cgroup subsys memory [ 0.001590] Initializing cgroup subsys devices [ 0.001604] Initializing cgroup subsys freezer [ 0.001615] Initializing cgroup subsys perf_event [ 0.001627] Initializing cgroup subsys pids [ 0.001654] CPU: Testing write buffer coherency: ok [ 0.001887] /cpus/cpu@0 missing clock-frequency property [ 0.001904] /cpus/cpu@1 missing clock-frequency property [ 0.001914] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001950] Setting up static identity map for 0x800082c0 - 0x80008320 [ 0.080129] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.080188] Brought up 2 CPUs [ 0.080202] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.080209] CPU: All CPU(s) started in HYP mode. [ 0.080214] CPU: Virtualization extensions available. [ 0.080614] devtmpfs: initialized [ 0.110900] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.111894] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.227612] omap_hwmod: dcan1: _wait_target_disable failed [ 0.325526] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.327185] pinctrl core: initialized pinctrl subsystem [ 0.328051] NET: Registered protocol family 16 [ 0.329126] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.350230] cpuidle: using governor ladder [ 0.380252] cpuidle: using governor menu [ 0.388602] OMAP GPIO hardware version 0.1 [ 0.392713] GPIO line 161 (radio_rst) hogged as output/low [ 0.395063] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.410726] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.410739] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.418357] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.418368] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.419197] OMAP DMA hardware revision 0.0 [ 0.461697] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.462831] edma 43300000.edma: memcpy is disabled [ 0.467758] edma 43300000.edma: TI EDMA DMA engine driver [ 0.474541] palmas 0-0058: IRQ missing: skipping irq request [ 0.490721] palmas 0-0058: Muxing GPIO a, PWM 0, LED 0 [ 0.562412] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.562838] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz [ 0.563207] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 0.563571] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz [ 0.563927] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 0.564104] media: Linux media interface: v0.10 [ 0.564160] Linux video capture interface: v2.00 [ 0.564201] pps_core: LinuxPPS API ver. 1 registered [ 0.564208] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.564233] PTP clock support registered [ 0.564279] EDAC MC: Ver: 3.0.0 [ 0.565055] Advanced Linux Sound Architecture Driver Initialized. [ 0.565961] clocksource: Switched to clocksource arch_sys_counter [ 0.576670] NET: Registered protocol family 2 [ 0.577183] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.577209] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) [ 0.577246] TCP: Hash tables configured (established 2048 bind 2048) [ 0.577297] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.577317] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.577516] NET: Registered protocol family 1 [ 0.577800] RPC: Registered named UNIX socket transport module. [ 0.577809] RPC: Registered udp transport module. [ 0.577816] RPC: Registered tcp transport module. [ 0.577822] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.578830] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.581180] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.588935] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.589578] NFS: Registering the id_resolver key type [ 0.589612] Key type id_resolver registered [ 0.589619] Key type id_legacy registered [ 0.589680] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.591831] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.591848] io scheduler noop registered (default) [ 0.591859] io scheduler deadline registered [ 0.591892] io scheduler cfq registered [ 0.596848] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.658816] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.662261] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 299, base_baud = 3000000) is a 8250 [ 0.663137] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 300, base_baud = 3000000) is a 8250 [ 0.663980] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 301, base_baud = 3000000) is a 8250 [ 0.664814] console [ttyS3] disabled [ 0.664861] 4806e000.serial: ttyS3 at MMIO 0x4806e000 (irq = 302, base_baud = 3000000) is a 8250 [ 1.447853] console [ttyS3] enabled [ 1.452167] 48422000.serial: ttyS7 at MMIO 0x48422000 (irq = 303, base_baud = 3000000) is a 8250 [ 1.462130] [drm] Initialized drm 1.1.0 20060810 [ 1.474008] loop: module loaded [ 1.478047] nand: No NAND device found [ 1.481817] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch [ 1.494182] m25p80 spi32766.0: found n25q128a13, expected s25fl256s1 [ 1.500598] m25p80 spi32766.0: n25q128a13 (16384 Kbytes) [ 1.506010] 7 ofpart partitions found on MTD device spi32766.0 [ 1.511870] Creating 7 MTD partitions on "spi32766.0": [ 1.517048] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 1.523110] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 1.529411] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 1.536328] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 1.542939] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 1.550305] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 1.556600] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 1.562461] mtd: partition "QSPI.file-system" extends beyond the end of device "spi32766.0" -- size truncated to 0x620000 [ 1.575386] libphy: Fixed MDIO Bus: probed [ 1.625993] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 1.632117] davinci_mdio 48485000.mdio: detected phy mask fffffffa [ 1.642384] libphy: 48485000.mdio: probed [ 1.646457] davinci_mdio 48485000.mdio: phy[0]: device 48485000.mdio:00, driver Micrel KSZ8081 or KSZ8091 [ 1.656104] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver Micrel KSZ8081 or KSZ8091 [ 1.666395] cpsw 48484000.ethernet: Detected MACID = c8:fd:19:b6:5e:f6 [ 1.673046] cpsw 48484000.ethernet: cpts: overflow check period 800 [ 1.680063] cpsw 48484000.ethernet: cpsw: Detected MACID = c8:fd:19:b6:5e:f7 [ 1.688684] mousedev: PS/2 mouse device common for all mice [ 1.694840] i2c /dev entries driver [ 1.699827] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin [ 1.710142] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.716171] vpe 489d0000.vpe: Device registered as /dev/video0 [ 1.766508] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 1.772892] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 1.796109] evm_3v3_sw: supplied by sysen1 [ 1.836660] ledtrig-cpu: registered to indicate activity on CPUs [ 1.846908] hwspinlock_user gatemp: requested 10 hwspinlocks [ 1.853287] [ 1.853287] [mcaspdrv_init] [ 1.857591] mcaspdrv_init called [ 1.861859] [ 1.861859] ============[davinci_mcasp_probe]============== [ 1.869012] ====>pm_runtime_forbid [ 1.872430] davinci-mcasp 48460000.mcasp: DAI is shared [ 1.877734] =========> [davinci_mcasp_probe] mem->start = [00000000] <== [ 1.884551] =========> [davinci_mcasp_probe] mcasp->base = [FA460000] <== [ 1.891487] =====[McASP1]==== [ 1.894466] =====[mcasp->base][FA460000]===== [ 1.898939] [ 1.898939] ============[davinci_mcasp_probe]============== [ 1.906073] ====>pm_runtime_forbid [ 1.909492] davinci-mcasp 48468000.mcasp: DAI is shared [ 1.914752] =========> [davinci_mcasp_probe] mem->start = [00000000] <== [ 1.921584] =========> [davinci_mcasp_probe] mcasp->base = [FA468000] <== [ 1.928497] =====[McASP3]==== [ 1.931475] =====[mcasp->base][FA468000]===== [ 1.931475] [ 1.938456] NET: Registered protocol family 10 [ 1.953883] sit: IPv6 over IPv4 tunneling driver [ 1.959133] NET: Registered protocol family 17 [ 1.963814] Key type dns_resolver registered [ 1.968270] omap_voltage_late_init: Voltage driver support not added [ 1.975269] Power Management for TI OMAP4+ devices. [ 1.980414] Registering SWP/SWPB emulation handler [ 1.988019] dmm 4e000000.dmm: initialized all PAT entries [ 2.004507] hctosys: unable to open rtc device (rtc0) [ 2.021947] aic_dvdd: disabling [ 2.023129] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.024987] @SD max clock = 20000000@ [ 2.025063] mmc0: new high speed SDHC card at address b368 [ 2.035642] mmcblk0: mmc0:b368 SDC 7.51 GiB [ 2.037903] mmcblk0: p1 p2 [ 2.049683] vmmcwl_fixed: disabling [ 2.053384] ldousb: disabling [ 2.056888] ALSA device list: [ 2.059869] No soundcards found. [ 2.079740] mmc1: MAN_BKOPS_EN bit is not set [ 2.102490] EXT4-fs (mmcblk0p2): recovery complete [ 2.107337] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.115494] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 2.121018] mmc1: new HS200 MMC card at address 0001 [ 2.126759] mmcblk1: mmc1:0001 MMC04G 3.57 GiB [ 2.141671] mmcblk1boot0: mmc1:0001 MMC04G partition 1 8.00 MiB [ 2.147725] devtmpfs: mounted [ 2.150978] Freeing unused kernel memory: 336K (c08e6000 - c093a000) [ 2.157381] This architecture does not have kernel memory protection. [ 2.158002] mmcblk1boot1: mmc1:0001 MMC04G partition 2 8.00 MiB [ 2.679703] systemd[1]: System time before build time, advancing clock. [ 2.774365] random: systemd: uninitialized urandom read (16 bytes read, 12 bits of entropy available) [ 2.791070] random: systemd: uninitialized urandom read (16 bytes read, 13 bits of entropy available) [ 2.802862] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 2.821446] systemd[1]: Detected architecture arm. Welcome to Arago 2016.12! [ 2.847303] systemd[1]: Set hostname to . [ 2.957241] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 14 bits of entropy available) [ 2.968476] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 14 bits of entropy available) [ 2.981280] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 14 bits of entropy available) [ 3.010291] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 15 bits of entropy available) [ 3.028053] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 15 bits of entropy available) [ 3.204778] random: systemd: uninitialized urandom read (16 bytes read, 18 bits of entropy available) [ 3.215512] random: systemd: uninitialized urandom read (16 bytes read, 18 bits of entropy available) [ 3.225509] random: systemd: uninitialized urandom read (16 bytes read, 18 bits of entropy available) [ 3.583195] systemd[1]: gplv3-notice.service: Service lacks both ExecStart= and ExecStop= setting. Refusing. [ 3.622206] systemd[1]: Configuration file /etc/systemd/system/multi-user.target.wants/CAX50.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 3.638679] systemd[1]: Configuration file /etc/systemd/system/multi-user.target.wants/CAX50.service is marked world-writable. Please remove world writability permission bits. Proceeding anyway. [ 3.756726] systemd[1]: gplv3-notice.service: Cannot add dependency job, ignoring: Unit gplv3-notice.service is not loaded properly: Invalid argument. [ 3.771215] systemd[1]: sysinit.target: Found ordering cycle on sysinit.target/start [ 3.779042] systemd[1]: sysinit.target: Found dependency on alignment.service/start [ 3.786785] systemd[1]: sysinit.target: Found dependency on basic.target/start [ 3.794045] systemd[1]: sysinit.target: Found dependency on sysinit.target/start [ 3.801518] systemd[1]: sysinit.target: Breaking ordering cycle by deleting job alignment.service/start [ 3.810975] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with sysinit.target/start [ SKIP ] Ordering cycle found, skipping alignment.service [ 3.848983] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 3.876317] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 3.907582] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 3.936249] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 3.966124] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 3.986770] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 4.016136] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 4.036280] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 4.066331] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 4.096118] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 4.126223] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 4.146195] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 4.176116] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 4.196247] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 4.246415] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ 4.290268] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 4.318552] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 4.348850] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ 4.388547] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 4.420069] systemd[1]: Mounting Temporary Directory... Mounting Temporary Directory... [ 4.446373] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 4.506410] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 4.525681] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 4.537040] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 4.596423] systemd[1]: Starting Journal Service... Starting Journal Service... [ 4.613516] systemd[1]: Mounted Debug File System. [ OK ] Mounted Debug File System. [ 4.636210] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 4.656188] systemd[1]: Mounted Temporary Directory. [ OK ] Mounted Temporary Directory. [ 4.687391] systemd[1]: Started Setup Virtual Console. [ OK ] Started Setup Virtual Console. [ 4.716494] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE [ 4.727403] systemd[1]: Failed to start Load Kernel Modules. [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ 4.776149] systemd[1]: systemd-modules-load.service: Unit entered failed state. [ 4.783594] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'. [ 4.792937] systemd[1]: Started Create list of required static device nodes for the current kernel. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ 4.827782] systemd[1]: Started Remount Root and Kernel File Systems. [ OK ] Started Remount Root and Kernel File Systems. [ 4.856419] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage... Starting udev Coldplug all Devices... Starting Create Static Device Nodes in /dev... Starting Apply Kernel Variables... [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. [ 5.442743] systemd-journald[126]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Reached target Local File Systems (Pre). Mounting /var/volatile... Mounting /media/ram... Starting udev Kernel Device Manager... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Started Load/Save Random Seed. [ OK ] Started Create Volatile Files and Directories. [ 6.398273] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ 6.435503] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ OK ] Started udev Coldplug all Devices. [ 6.473591] alg: skcipher: setkey failed on test 5 for ecb-des-omap: flags=100 [ 6.516164] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-omap: flags=100 [ 6.570417] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-omap: flags=100 [ OK ] Found device /dev/ttyS3. [ 6.675769] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc0 Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ 6.892952] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ OK ] Started Network Time Synchronization.[ 6.921854] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 6.922055] SCSI subsystem initialized [ 6.936737] CAN device driver interface [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Time Synchronized. Starting Synchronize System and HW clocks... [ OK ] Started Synchronize System and HW clocks. [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on dropbear.socket. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Reached target Sockets. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Reached target Basic System. Starting uim-sysfs.service... Starting Permit User Sessions... [ OK ] Started System Logging Service. Starting Telephony service... Starting Login Service... [ OK ] Started Kernel Logging Service. Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started D-Bus System Message Bus. [ 7.928858] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 8.109753] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 8.122756] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=351) [ 8.154000] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 8.170164] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 8.208647] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 8.256148] scsi host0: ahci [ 8.261945] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 335 [ 8.311109] [drm] Initialized pvr 1.14.3699939 20110701 on minor 0 [ 8.386997] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Telephony service. [ 8.629207] Bluetooth: Core ver 2.21 [ 8.632854] NET: Registered protocol family 31 [ 8.637468] ata1: SATA link down (SStatus 0 SControl 300) Starting Network Service... [ 8.666031] Bluetooth: HCI device and connection manager initialized [ 8.686052] Bluetooth: HCI socket layer initialized [ OK ] Started Start helloworld. [ 8.704597] Bluetooth: L2CAP socket layer initialized [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. [ 8.736405] Bluetooth: SCO socket layer initialized [INFO] VERSION: R0.2.0.0014 [ OK ] Started Network Service.[ 8.808995] net eth1: initializing cpsw version 1.15 (0) [ OK ] Started Permit User Sessions. [ 8.849355] net eth0: initialized cpsw ale version 1.4 [ 8.854532] net eth0: ALE Table size 1024 [INFO] memory test PASS [SYS ] paring option: token=3, option=(null) [INFO] R3 init, iface=/dev/ttyS7 [INFO] R2 init [INFO] watchdog init [INFO] CLIENT ready [ 8.981201] net eth1: phy found : id is : 0x221560 [ 9.054041] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 9.120246] net eth0: initializing cpsw version 1.15 (0) [ 9.201743] NET: Registered protocol family 15 [ 9.240976] net eth0: phy found : id is : 0x221560 [ 9.275479] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.566405] Initializing XFRM netlink socket [ 10.537834] usbcore: registered new interface driver usbfs [ 10.543428] usbcore: registered new interface driver hub [ 10.563780] usbcore: registered new device driver usb [ 10.598669] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 10.604209] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 10.635580] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00210010 [ 10.666090] xhci-hcd xhci-hcd.0.auto: irq 425, io mem 0x48890000 [ 10.696948] hub 1-0:1.0: USB hub found [ 10.704035] hub 1-0:1.0: 1 port detected [ 10.721671] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 10.739574] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 10.766207] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 10.797924] hub 2-0:1.0: USB hub found [ 10.807697] hub 2-0:1.0: 1 port detected [ 10.818781] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 10.824318] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 10.858562] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00210010 [ 10.886277] xhci-hcd xhci-hcd.1.auto: irq 426, io mem 0x488d0000 [ 10.913128] hub 3-0:1.0: USB hub found [ 10.928329] hub 3-0:1.0: 1 port detected [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 10.957023] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 10.962560] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ OK ] Started Serial Getty on ttyS3. [ OK ] Reached target Login Prompts. [ OK ] Reached target Network. Starting Network Name Resolution... [ 10.996765] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Starting Lightning Fast Webserver With Light System Requirements... [ OK ] Started Login Service. [ 11.067778] hub 4-0:1.0: USB hub found [ 11.082189] hub 4-0:1.0: 1 port detected [ 11.166095] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ OK ] Started Network Name Resolution. [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ 11.276042] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ OK ] Started uim-sysfs.service. [ 11.426276] xhci-hcd xhci-hcd.1.auto: @@Always disable hardware LPM Starting rc.pvr.service... [ 11.584057] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [ 11.598237] usb 2-1: reset SuperSpeed USB device number 2 using xhci-hcd [ 11.636751] usb 3-1: reset high-speed USB device number 2 using xhci-hcd [ 11.660851] r8152 2-1:1.0 eth2: v1.08.2 [ OK ] Started rc.pvr.service. Starting weston.service... [ 11.796221] xhci-hcd xhci-hcd.1.auto: @@Always disable hardware LPM [ OK ] Started weston.service.[ 11.812849] xhci-hcd xhci-hcd.1.auto: @@Always disable hardware LPM Starting telnetd.service... Starting tiipclad-daemon.service... [ OK ] Started telnetd.service. [ 11.880996] r8152 3-1:1.0 eth3: v1.08.2 [ 11.888455] usbcore: registered new interface driver r8152 [ 11.908720] usbcore: registered new interface driver cdc_ether [ OK ] Started tiipclad-daemon.service. Starting thttpd.service... [ 12.084741] usb 3-1: reset high-speed USB device number 2 using xhci-hcd [ 12.096844] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ OK ] Started thttpd.service. Starting rng-tools.service... [ 12.226158] xhci-hcd xhci-hcd.1.auto: @@Always disable hardware LPM [ 12.244803] xhci-hcd xhci-hcd.1.auto: @@Always disable hardware LPM [ 12.326059] r8152 3-1:1.0 eth3: v1.08.2 [ 12.402318] random: nonblocking pool is initialized [ OK ] Started rng-tools.service. Starting gdbserverproxy.service... [ OK ] Started gdbserverproxy.service. Starting matrix-gui-2.0.service... [ OK ] Started matrix-gui-2.0.service. [ 12.556277] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready Starting thermal-zone-init.service... [ OK ] Started thermal-zone-init.service. [ OK ] Reached target Multi-User System. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dra7xx-evm ttyS3 Arago 2016.12 dra7xx-evm ttyS3 dra7xx-evm login: root (automatic login) [ 12.981512] cpsw 48484000.ethernet eth1: Link is Up - 100Mbps/Full - flow control rx/tx [ 12.990014] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready root@dra7xx-evm:~# [ 14.241504] cpsw 48484000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 14.249654] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.199054] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 15.653597] IPv6: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready