/**
 * These arguments were used when this file was generated. They will be automatically applied on subsequent loads
 * via the GUI or CLI. Run CLI with '--help' for additional information on how to override these arguments.
 * @cliArgs --device "AM62x" --part "Default" --package "AMC" --context "r5fss0-0" --product "MCU_PLUS_SDK_AM62x@11.00.00"
 * @v2CliArgs --device "AM625-Q1" --package "FCBGA (AMC)" --variant "AM6254-G" --context "r5fss0-0" --product "MCU_PLUS_SDK_AM62x@11.00.00"
 * @versions {"tool":"1.23.2+4156"}
 */

/**
 * Import the modules used in this configuration.
 */
const bootloader  = scripting.addModule("/drivers/bootloader/bootloader", {}, false);
const bootloader1 = bootloader.addInstance();
const i2c         = scripting.addModule("/drivers/i2c/i2c", {}, false);
const i2c1        = i2c.addInstance();
const uart        = scripting.addModule("/drivers/uart/uart", {}, false);
const uart1       = uart.addInstance();
const clock       = scripting.addModule("/kernel/dpl/clock");
const debug_log   = scripting.addModule("/kernel/dpl/debug_log");

/**
 * Write custom configuration values to the imported modules.
 */
bootloader1.$name     = "CONFIG_BOOTLOADER0";
bootloader1.bootMedia = "MEM";

i2c1.$name                      = "CONFIG_I2C0";
i2c1.useWakeupDomainPeripherals = false;
i2c1.I2C_child.$name            = "drivers_i2c_v0_i2c_v0_template0";
i2c1.I2C.$assign                = "I2C0";

uart1.$name                      = "CONFIG_UART1";
uart1.useWakeupDomainPeripherals = false;
uart1.UART.$assign               = "USART1";
uart1.UART.RXD.$assign           = "I2C1_SCL";
uart1.UART.TXD.$assign           = "I2C1_SDA";

const udma             = scripting.addModule("/drivers/udma/udma", {}, false);
const udma1            = udma.addInstance({}, false);
udma1.$name            = "CONFIG_UDMA0";
bootloader1.udmaDriver = udma1;

const udma_blkcopy_channel     = scripting.addModule("/drivers/udma/udma_blkcopy_channel", {}, false);
const udma_blkcopy_channel1    = udma_blkcopy_channel.addInstance({}, false);
udma_blkcopy_channel1.$name    = "CONFIG_UDMA_BLKCOPY_CH0";
bootloader1.udmaBlkCopyChannel = udma_blkcopy_channel1;

clock.instance = "TIMER1";

debug_log.enableUartLog                      = true;
debug_log.enableLogZoneInfo                  = true;
debug_log.sysfwUartTrace                     = true;
debug_log.enableMemLog                       = true;
debug_log.uartTrace                          = true;
debug_log.uartLog.$name                      = "CONFIG_UART0";
debug_log.uartLog.intrEnable                 = "DISABLE";
debug_log.uartLog.useWakeupDomainPeripherals = false;
debug_log.uartLog.UART.$assign               = "USART0";
debug_log.uartLog.UART.RXD.$assign           = "UART0_RXD";
debug_log.uartLog.UART.TXD.$assign           = "UART0_TXD";
debug_log.sysfwUartLog.$name                 = "CONFIG_UART_TRACE0";

/**
 * Pinmux solution for unlocked pins/peripherals. This ensures that minor changes to the automatic solver in a future
 * version of the tool will not impact the pinmux you originally saw.  These lines can be completely deleted in order to
 * re-solve from scratch.
 */
i2c1.I2C.SCL.$suggestSolution                          = "I2C0_SCL";
i2c1.I2C.SDA.$suggestSolution                          = "I2C0_SDA";
debug_log.sysfwUartLog.WKUP_UART.$suggestSolution      = "WKUP_USART0";
debug_log.sysfwUartLog.WKUP_UART.RXD.$suggestSolution  = "WKUP_UART0_RXD";
debug_log.sysfwUartLog.WKUP_UART.TXD.$suggestSolution  = "WKUP_UART0_TXD";
debug_log.sysfwUartLog.WKUP_UART.RTSn.$suggestSolution = "WKUP_UART0_RTSn";
debug_log.sysfwUartLog.WKUP_UART.CTSn.$suggestSolution = "WKUP_UART0_CTSn";