þ U-Boot SPL 2018.01-g313dcd69c2 (Dec 16 2018 - 05:23:30) SYSFW ABI: 2.5 (firmware rev 0x0012 '18.10.0-v2018.10 (Curious Crow)') Trying to boot from MMC2 Starting ATF on ARM64 core... NOTICE: BL31: v1.5(release):ti2018.04-rc1 NOTICE: BL31: Built : 04:37:22, Dec 16 2018 I/TC: I/TC: OP-TEE version: 3.2.0-81-g48952f9-dev #1 Sun Dec 16 05:14:09 UTC 2018 aarch64 I/TC: Initialized U-Boot SPL 2018.01-g313dcd69c2 (Dec 16 2018 - 05:15:53) Trying to boot from MMC2 U-Boot 2018.01-g313dcd69c2 (Dec 16 2018 - 05:15:53 +0000) Model: Texas Instruments AM654 Base Board DRAM: 4 GiB MMC: sdhci@0: 0, sdhci@0: 1 *** Warning - bad CRC, using default environment In: serial@2800000 Out: serial@2800000 Err: serial@2800000 GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid GPT *** GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid Backup GPT *** detected AM6-IDKAPPEVM detected SER-PCIE2LEVM Net: Warning: cpsw_nuss@046000000 using MAC address from ROM eth0: cpsw_nuss@046000000 Hit any key to stop autoboot: 0 GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid GPT *** GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid Backup GPT *** bad MBR sector signature 0x0000 switch to partitions #0, OK mmc1 is current device SD/MMC found on device 1 ** Unable to read file boot.scr ** 1011 bytes read in 8 ms (123 KiB/s) Loaded env from uEnv.txt Importing environment from mmc1 ... Running uenvcmd ... Using board_name = am65x 11685896 bytes read in 1020 ms (10.9 MiB/s) 59908 bytes read in 17 ms (3.4 MiB/s) 9204 bytes read in 9 ms (998 KiB/s) 2084 bytes read in 6 ms (338.9 KiB/s) ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 reserving fdt memory region: addr=82000000 size=10f000 Loading Device Tree to 00000000fddb2000, end 00000000fdec3fff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.79-gbde58ab01e (oe-user@oe-host) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #1 SMP PREEMPT Thu Dec 20 03:19:19 UTC 2018 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] Machine model: Texas Instruments AM654 Base Board [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [ 0.000000] bootconsole [ns16550a0] enabled [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009b000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f1-dma-memory@9b000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009b100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f1-memory@9b100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f0-dma-memory@9c000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c100000, size 7 MiB [ 0.000000] OF: reserved mem: initialized node r5f0-memory@9c100000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 512 MiB at 0x00000000c0000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 2 pages/cpu @ffff80087feb0000 s38936 r8192 d83944 u131072 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64704 [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=47040000.ospi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),128k(ospi.env),128k(ospi.env.backup),1m(ospi.sysfw),-@8m(ospi.rootfs) root=PARTUUID=e25a6b67-02 rw rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 4096 (order: -1, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 6, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 5, 2097152 bytes) [ 0.000000] software IO TLB [mem 0xf9db0000-0xfddb0000] (64MB) mapped at [ffff800079db0000-ffff80007ddaffff] [ 0.000000] Memory: 3529664K/4145152K available (7422K kernel code, 660K rwdata, 2816K rodata, 448K init, 654K bss, 91200K reserved, 524288K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7bdfffff0000 (126847 GB) [ 0.000000] .text : 0xffff000008080000 - 0xffff0000087c0000 ( 7424 KB) [ 0.000000] .rodata : 0xffff0000087c0000 - 0xffff000008a90000 ( 2880 KB) [ 0.000000] .init : 0xffff000008a90000 - 0xffff000008b00000 ( 448 KB) [ 0.000000] .data : 0xffff000008b00000 - 0xffff000008ba5008 ( 661 KB) [ 0.000000] .bss : 0xffff000008ba5008 - 0xffff000008c48a60 ( 655 KB) [ 0.000000] fixed : 0xffff7fdffe7b0000 - 0xffff7fdffec00000 ( 4416 KB) [ 0.000000] PCI I/O : 0xffff7fdffee00000 - 0xffff7fdfffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffff7fe000000000 - 0xffff800000000000 ( 128 GB maximum) [ 0.000000] 0xffff7fe000000000 - 0xffff7fe002200000 ( 34 MB actual) [ 0.000000] memory : 0xffff800000000000 - 0xffff800880000000 ( 34816 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: no VLPI support, no direct LPI support [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [ 0.000000] ITS@0x0000000001820000: allocated 1048576 Devices @8c0800000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GIC: using LPI property table @0x00000008c00b0000 [ 0.000000] ITS: Allocated 1792 chunks for LPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [ 0.000000] CPU0: using LPI pending table @0x00000008c00c0000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [ 0.000006] sched_clock: 56 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [ 0.008635] Console: colour dummy device 80x25 [ 0.013216] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) [ 0.023906] pid_max: default: 32768 minimum: 301 [ 0.028756] Security Framework initialized [ 0.033012] Mount-cache hash table entries: 8192 (order: 0, 65536 bytes) [ 0.039892] Mountpoint-cache hash table entries: 8192 (order: 0, 65536 bytes) [ 0.063310] ASID allocator initialised with 32768 entries [ 0.068947] Hierarchical SRCU implementation. [ 0.081527] PCI/MSI: /soc0/interrupt-controller@1800000/gic-its@1000000 domain created [ 0.089931] Platform MSI: /soc0/interrupt-controller@1800000/gic-its@1000000 domain created [ 0.106515] smp: Bringing up secondary CPUs ... [ 0.139642] Detected VIPT I-cache on CPU1 [ 0.139680] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [ 0.139727] CPU1: using LPI pending table @0x00000008c0360000 [ 0.139772] CPU1: Booted secondary processor [410fd034] [ 0.196659] Detected VIPT I-cache on CPU2 [ 0.196698] GICv3: CPU2: found redistributor 100 region 0:0x00000000018c0000 [ 0.196748] CPU2: using LPI pending table @0x00000008c03d0000 [ 0.196796] CPU2: Booted secondary processor [410fd034] [ 0.225073] Detected VIPT I-cache on CPU3 [ 0.225100] GICv3: CPU3: found redistributor 101 region 0:0x00000000018e0000 [ 0.225147] CPU3: using LPI pending table @0x00000008c0430000 [ 0.225178] CPU3: Booted secondary processor [410fd034] [ 0.225312] smp: Brought up 1 node, 4 CPUs [ 0.296968] SMP: Total of 4 processors activated. [ 0.301785] CPU features: detected feature: GIC system register CPU interface [ 0.309089] CPU features: detected feature: 32-bit EL0 Support [ 0.315059] CPU features: detected feature: Kernel page table isolation (KPTI) [ 0.346368] CPU: All CPU(s) started at EL2 [ 0.350589] alternatives: patching kernel code [ 0.356559] devtmpfs: initialized [ 0.369766] random: get_random_u32 called from bucket_table_alloc+0x108/0x258 with crng_init=0 [ 0.379390] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.389381] futex hash table entries: 1024 (order: 1, 131072 bytes) [ 0.397209] pinctrl core: initialized pinctrl subsystem [ 0.403201] NET: Registered protocol family 16 [ 0.409820] vdso: 2 pages (1 code @ ffff0000087d0000, 1 data @ ffff000008b20000) [ 0.423413] DMA: preallocated 256 KiB pool for atomic allocations [ 0.434540] davinci_gpio 600000.main_gpio0: IRQ not populated, err = -517 [ 0.441705] davinci_gpio 601000.main_gpio1: IRQ not populated, err = -517 [ 0.448831] davinci_gpio 42110000.: IRQ not populated, err = -517 [ 0.466574] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.473457] HugeTLB registered 512 MiB page size, pre-allocated 0 pages [ 0.482774] omap_i2c 42120000.i2c: could not find pctldev for node /soc0/pinmux@4301c000/wkup_i2c0_pins_default, deferring probe [ 0.494689] omap_i2c 40b00000.i2c: could not find pctldev for node /soc0/pinmux@4301c000/mcu_i2c0_pins_default, deferring probe [ 0.506467] omap_i2c 2000000.i2c: could not find pctldev for node /soc0/pinmux@11c2e8/main_i2c0_pins_default, deferring probe [ 0.518072] omap_i2c 2010000.i2c: could not find pctldev for node /soc0/pinmux@11c2e8/main_i2c1_pins_default, deferring probe [ 0.529668] omap_i2c 2020000.i2c: could not find pctldev for node /soc0/pinmux@11c000/main_i2c2_pins_default, deferring probe [ 0.541381] media: Linux media interface: v0.10 [ 0.546046] Linux video capture interface: v2.00 [ 0.550808] pps_core: LinuxPPS API ver. 1 registered [ 0.555890] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.565249] PTP clock support registered [ 0.569284] EDAC MC: Ver: 3.0.0 [ 0.573429] Advanced Linux Sound Architecture Driver Initialized. [ 0.580398] clocksource: Switched to clocksource arch_sys_counter [ 0.586811] VFS: Disk quotas dquot_6.6.0 [ 0.590936] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes) [ 0.604909] NET: Registered protocol family 2 [ 0.609894] TCP established hash table entries: 32768 (order: 2, 262144 bytes) [ 0.617602] TCP bind hash table entries: 32768 (order: 3, 524288 bytes) [ 0.624956] TCP: Hash tables configured (established 32768 bind 32768) [ 0.631795] UDP hash table entries: 2048 (order: 0, 65536 bytes) [ 0.638067] UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes) [ 0.644936] NET: Registered protocol family 1 [ 0.649897] RPC: Registered named UNIX socket transport module. [ 0.655973] RPC: Registered udp transport module. [ 0.660789] RPC: Registered tcp transport module. [ 0.665603] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.677383] workingset: timestamp_bits=46 max_order=16 bucket_order=0 [ 0.689269] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.695839] NFS: Registering the id_resolver key type [ 0.701097] Key type id_resolver registered [ 0.705389] Key type id_legacy registered [ 0.709503] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.716562] 9p: Installing v9fs 9p2000 file system support [ 0.726704] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.734292] io scheduler noop registered [ 0.738419] io scheduler cfq registered (default) [ 0.743240] io scheduler mq-deadline registered [ 0.747879] io scheduler kyber registered [ 0.754224] pinctrl-single 11c000.pinmux: 185 pins at pa ffff000009cac000 size 740 [ 0.762149] pinctrl-single 11c2e8.pinmux: 9 pins at pa ffff000009ccc2e8 size 36 [ 0.769872] pinctrl-single 4301c000.pinmux: 70 pins at pa ffff000009cec000 size 280 [ 0.785079] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 0.794492] console [ttyS2] disabled [ 0.798216] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 14, base_baud = 3000000) is a 8250 [ 0.807019] console [ttyS2] enabled [ 0.807019] console [ttyS2] enabled [ 0.814065] bootconsole [ns16550a0] disabled [ 0.814065] bootconsole [ns16550a0] disabled [ 0.834627] loop: module loaded [ 0.839681] libphy: Fixed MDIO Bus: probed [ 0.844395] tun: Universal TUN/TAP device driver, 1.6 [ 0.849642] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 0.857470] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.863435] sky2: driver version 1.30 [ 0.868413] VFIO - User Level meta-driver version: 0.3 [ 0.874295] i2c /dev entries driver [ 0.878737] sdhci: Secure Digital Host Controller Interface driver [ 0.884916] sdhci: Copyright(c) Pierre Ossman [ 0.889300] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.896255] ledtrig-cpu: registered to indicate activity on CPUs [ 0.902350] ti-sci soc0:dmsc: invalid resource [ 0.907546] optee: probing for conduit method from DT. I/TC: Dynamic shared memory is disabled [ 0.916715] optee: initialized driver [ 0.921664] NET: Registered protocol family 17 [ 0.926199] 9pnet: Installing 9P2000 support [ 0.930526] Key type dns_resolver registered [ 0.935432] registered taskstats version 1 [ 0.940140] davinci_gpio 600000.main_gpio0: IRQ not populated, err = -517 [ 0.947311] davinci_gpio 601000.main_gpio1: IRQ not populated, err = -517 [ 0.954314] davinci_gpio 42110000.: IRQ not populated, err = -517 [ 0.965987] ti-sci soc0:dmsc: invalid resource [ 0.970634] ti-sci soc0:dmsc: ABI: 2.5 (firmware rev 0x0012 '18.10.0-v2018.10 (Curious Crow)') [ 0.996666] random: fast init done [ 1.318950] davinci_gpio 600000.main_gpio0: IRQ not populated, err = -517 [ 1.326126] davinci_gpio 601000.main_gpio1: IRQ not populated, err = -517 [ 1.333130] davinci_gpio 42110000.: IRQ not populated, err = -517 [ 1.340715] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz [ 1.347090] omap_i2c 40b00000.i2c: bus 1 rev0.12 at 400 kHz [ 1.380973] omap_i2c 2000000.i2c: bus 2 rev0.12 at 400 kHz [ 1.387157] omap_i2c 2010000.i2c: bus 3 rev0.12 at 400 kHz [ 1.393314] omap_i2c 2020000.i2c: bus 4 rev0.12 at 400 kHz [ 1.400336] ti-sci-inta 33d00000.interrupt-controller: ti,sci-dst-irq-type resource type ids not available [ 1.414274] keystone-pcie 5500000.pcie: Linked as a consumer to phy-900000.serdes.2 [ 1.421993] keystone-pcie 5500000.pcie: Linked as a consumer to phy-910000.serdes.3 [ 1.435127] OF: PCI: host bridge /soc0/pcie@5500000 ranges: [ 1.440723] OF: PCI: IO 0x10020000..0x1002ffff -> 0x00000000 [ 1.446649] OF: PCI: MEM 0x10030000..0x17ffffff -> 0x10030000 [ 2.452844] keystone-pcie 5500000.pcie: phy link never came up [ 2.458804] keystone-pcie 5500000.pcie: PCI host bridge to bus 0000:00 [ 2.465337] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.470824] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.477002] pci_bus 0000:00: root bus resource [mem 0x10030000-0x17ffffff] [ 2.484292] pci 0000:00:00.0: BAR 6: assigned [mem 0x10030000-0x1003ffff pref] [ 2.491521] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 2.496902] pcieport 0000:00:00.0: limiting MRRS to 256 [ 2.502344] pcieport 0000:00:00.0: Signaling PME with IRQ 31 [ 2.508103] pcieport 0000:00:00.0: AER enabled with IRQ 31 [ 2.514594] k3-navss-ringacc 3c000000.ringacc: Ring Accelerator probed rings:818, gp-rings[304,464] sci-dev-id:187 [ 2.524946] k3-navss-ringacc 3c000000.ringacc: dma-ring-reset-quirk: enabled [ 2.531993] k3-navss-ringacc 3c000000.ringacc: RA Proxy rev. 66344100, num_proxies:64 [ 2.540016] k3-navss-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,255] sci-dev-id:195 [ 2.550272] k3-navss-ringacc 2b800000.ringacc: dma-ring-reset-quirk: enabled [ 2.557318] k3-navss-ringacc 2b800000.ringacc: RA Proxy rev. 66344100, num_proxies:64 [ 2.566893] cadence-qspi 47040000.ospi: mt35xu512 (65536 Kbytes) [ 2.572928] 7 cmdlinepart partitions found on MTD device 47040000.ospi.0 [ 2.579625] Creating 7 MTD partitions on "47040000.ospi.0": [ 2.585211] 0x000000000000-0x000000080000 : "ospi.tiboot3" [ 2.591547] 0x000000080000-0x000000280000 : "ospi.tispl" [ 2.597487] 0x000000280000-0x000000680000 : "ospi.u-boot" [ 2.603483] 0x000000680000-0x0000006a0000 : "ospi.env" [ 2.609229] 0x0000006a0000-0x0000006c0000 : "ospi.env.backup" [ 2.615564] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw" [ 2.621451] 0x000000800000-0x000004000000 : "ospi.rootfs" [ 2.736635] cadence-qspi 47040000.ospi: Cadence QSPI NOR probe failed -517 [ 2.745210] spi spi2.0: not using DMA for McSPI (-19) [ 2.750681] m25p80 spi2.0: n25q128a13 (16384 Kbytes) [ 2.756916] am65-cpsw-nuss 46000000.ethernet: rx-flow-id-base is not set -22 [ 2.764099] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA07100, cpsw version 0x6BA80100 Ports: 2 [ 2.775692] UDMA has not been proped [ 2.779331] am65-cpsw-nuss 46000000.ethernet: Failed to request tx dma channel -517 [ 2.788980] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a2109, freq:200000000, add_val:4 [ 2.798902] mmc0: Unknown controller version (4). You may experience problems. [ 2.848408] mmc0: SDHCI controller on 4f80000.sdhci [4f80000.sdhci] using ADMA 64-bit [ 2.861071] mmc1: Unknown controller version (4). You may experience problems. [ 2.912425] mmc1: SDHCI controller on 4fa0000.sdhci [4fa0000.sdhci] using ADMA 64-bit [ 2.924774] mmc0: new HS200 MMC card at address 0001 [ 2.930150] mmcblk0: mmc0:0001 R1J56L 14.7 GiB [ 2.935103] mmcblk0boot0: mmc0:0001 R1J56L partition 1 8.00 MiB [ 2.944119] mmcblk0boot1: mmc0:0001 R1J56L partition 2 8.00 MiB [ 2.951573] mmcblk0rpmb: mmc0:0001 R1J56L partition 3 4.00 MiB [ 2.991537] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fc5900 [ 2.998100] mmc1: new high speed SDHC card at address 59b4 [ 3.003880] mmcblk1: mmc1:59b4 14.9 GiB [ 3.009182] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fc5900 [ 3.015881] mmcblk1: p1 p2 [ 3.020266] ti-udma 31150000.udmap: Channels: 267 (tchan: 120, echan: 32, rchan: 150, rflow: 300) [ 3.044309] ti-udma 285c0000.udmap: Channels: 96 (tchan: 48, echan: 0, rchan: 48, rflow: 96) [ 3.059301] cadence-qspi 47040000.ospi: mt35xu512 (65536 Kbytes) [ 3.065341] 7 cmdlinepart partitions found on MTD device 47040000.ospi.0 [ 3.072039] Creating 7 MTD partitions on "47040000.ospi.0": [ 3.077616] 0x000000000000-0x000000080000 : "ospi.tiboot3" [ 3.083926] 0x000000080000-0x000000280000 : "ospi.tispl" [ 3.089899] 0x000000280000-0x000000680000 : "ospi.u-boot" [ 3.096010] 0x000000680000-0x0000006a0000 : "ospi.env" [ 3.101727] 0x0000006a0000-0x0000006c0000 : "ospi.env.backup" [ 3.108083] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw" [ 3.114003] 0x000000800000-0x000004000000 : "ospi.rootfs" [ 3.122303] am65-cpsw-nuss 46000000.ethernet: rx-flow-id-base is not set -22 [ 3.129492] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA07100, cpsw version 0x6BA80100 Ports: 2 [ 3.147263] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48 [ 3.158568] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a2109, freq:200000000, add_val:4 [ 3.167037] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 0.4 [ 3.174256] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 [ 3.216412] am65-cpsw-nuss 46000000.ethernet: davinci mdio revision 9.7, bus freq 1000000 [ 3.224586] libphy: 46000000.ethernet: probed [ 3.232017] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 3.239035] hctosys: unable to open rtc device (rtc0) [ 3.341458] ALSA device list: [ 3.344442] No soundcards found. [ 3.409589] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.417753] VFS: Mounted root (ext4 filesystem) on device 179:130. [ 3.426108] devtmpfs: mounted [ 3.429286] Freeing unused kernel memory: 448K [ 3.769226] systemd[1]: System time before build time, advancing clock. [ 3.870530] NET: Registered protocol family 10 [ 3.876115] Segment Routing with IPv6 [ 3.927910] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid) [ 3.949081] systemd[1]: Detected architecture arm64. Welcome to Arago 2018.10! [ 3.969830] systemd[1]: Set hostname to . [ 4.330602] random: systemd: uninitialized urandom read (16 bytes read) [ 4.337449] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 4.352585] random: systemd: uninitialized urandom read (16 bytes read) [ 4.360984] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.380524] random: systemd: uninitialized urandom read (16 bytes read) [ 4.393321] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 4.413549] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 4.428779] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 4.444582] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 4.461394] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ OK ] Listening on Journal Socket. Mounting Kernel Debug File System... [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Listening on udev Control Socket. [ OK ] Reached target Swap. [ OK ] Reached target Slices. Starting Load Kernel Modules... [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 4.594917] cryptodev: loading out-of-tree module taints kernel. [ 4.604427] cryptodev: driver 1.9 loaded. [ OK ] Reached target Paths. Mounting Huge Pages File System... Mounting POSIX Message Queue File System... [ OK ] Listening on /dev/initctl Compatibility Named Pipe. Starting Create list of required st…ce nodes for the current kernel... [ OK ] Listening on Network Service Netlink Socket. [ OK ] Reached target Remote File Systems. Starting Remount Root and Kernel File Systems... [ 4.743752] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) Mounting Temporary Directory (/tmp)... Starting Journal Service... [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted Temporary Directory (/tmp). [ OK ] Started Load Kernel Modules. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Journal Service. Starting Create System Users... Starting Rebuild Hardware Database... Starting Flush Journal to Persistent Storage... Starting Apply Kernel Variables... Mounting Kernel Configuration File System... [ OK ] Mounted Kernel Configuration File System. [ OK ] Started Create System Users. [ OK ] Started Apply Kernel Variables. [ 5.045043] systemd-journald[151]: Received request to flush runtime journal from PID 1 Starting Create Static Device Nodes in /dev... [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). Mounting /var/volatile... Mounting /media/ram... Starting udev Kernel Device Manager... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Rebuild Dynamic Linker Cache... Starting Create Volatile Files and Directories... Starting Rebuild Journal Catalog... [ OK ] Started Load/Save Random Seed. [ OK ] Started Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Rebuild Journal Catalog. [ OK ] Started Rebuild Dynamic Linker Cache. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ OK ] Started Rebuild Hardware Database. Starting udev Coldplug all Devices... Starting Update is Completed... [ OK ] Started Update is Completed. [ OK ] Started udev Coldplug all Devices. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on dropbear.socket. [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timers. Starting Network Service... [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ 7.924889] input: gpio-decoder as /devices/platform/gpio-decoder/input/input1 [ OK ] Reached target Basic System. [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. Starting Login Service... Starting rc.pvr.service... Starting TI IPC Daemon... Starting RPC Bind Service... Starting Print notice about GPLv3 packages... [ 8.104702] [drm] Initialized pvr 1.17.4948957 20110701 for 7000000.gpu on minor 0 [ OK ] Started System Logging Service. [ OK ] Started Periodic Command Scheduler. [ 8.165829] CAN device driver interface [ OK ] Started Job spooling tools. [ OK ] Started Kernel Logging Service. [ OK ] Reached target Containers. [ OK ] Started Hardware RNG Entropy Gatherer Daemon. [ OK ] Started D-Bus System Message Bus. [ 8.222155] m_can 40528000.mcan: m_can device registered (irq=10, version=32) [ 8.248631] m_can 40568000.mcan: m_can device registered (irq=12, version=32) [ 8.294305] random: crng init done [ 8.297962] random: 7 urandom warning(s) missed due to ratelimiting [ 8.352761] PVR_K: UM DDK-(4948957) and KM DDK-(4948957) match. [ OK ] [ 8.397475] omap_rng 4e10000.trng: Random Number Generator ver. 230b34c [ 8.416797] pruss b000000.icssg: creating PRU cores and other child platform devices [ 8.429176] remoteproc remoteproc0: b034000.pru is available [ 8.435084] pru-rproc b034000.pru: PRU rproc node /soc0/pruss_soc_bus@b026004/icssg@0/pru@34000 probed successfully [ 8.437484] at24 0-0050: 131072 byte 24c1024 EEPROM, writable, 1 bytes/write [ 8.462671] remoteproc remoteproc1: b004000.rtu is available [ 8.470175] pru-rproc b004000.rtu: PRU rproc node /soc0/pruss_soc_bus@b026004/icssg@0/rtu@4000 probed successfully [ 8.489998] remoteproc remoteproc2: b038000.pru is available [ 8.498556] pru-rproc b038000.pru: PRU rproc node /soc0/pruss_soc_bus@b026004/icssg@0/pru@38000 probed successfully [ 8.512120] remoteproc remoteproc3: b006000.rtu is available [ 8.517914] pru-rproc b006000.rtu: PRU rproc node /soc0/pruss_soc_bus@b026004/icssg@0/rtu@6000 probed successfully [ 8.572446] davinci_mdio b032400.mdio: davinci mdio revision 1.7, bus freq 1000000 [ 8.580088] libphy: b032400.mdio: probed [ 8.676656] davinci_mdio b032400.mdio: phy[0]: device b032400.mdio:00, driver TI DP83867 [ 8.686302] davinci_mdio b032400.mdio: phy[3]: device b032400.mdio:03, driver TI DP83867 [ 8.696255] pruss b100000.icssg: creating PRU cores and other child platform devices [ 8.706513] remoteproc remoteproc4: b134000.pru is available [ 8.712251] pru-rproc b134000.pru: PRU rproc node /soc0/pruss_soc_bus@b126004/icssg@0/pru@34000 probed successfully [ 8.723440] remoteproc remoteproc5: b104000.rtu is available [ 8.729188] pru-rproc b104000.rtu: PRU rproc node /soc0/pruss_soc_bus@b126004/icssg@0/rtu@4000 probed successfully [ 8.740290] remoteproc remoteproc6: b138000.pru is available [ 8.746025] pru-rproc b138000.pru: PRU rproc node /soc0/pruss_soc_bus@b126004/icssg@0/pru@38000 probed successfully [ 8.757207] remoteproc remoteproc7: b106000.rtu is available [ 8.762944] pru-rproc b106000.rtu: PRU rproc node /soc0/pruss_soc_bus@b126004/icssg@0/rtu@6000 probed successfully [ 8.789114] icssg-prueth pruss0_eth: TI PRU ethernet driver initialized: dual EMAC mode [ 8.812480] davinci_mdio b132400.mdio: davinci mdio revision 1.7, bus freq 1000000 [ 8.820097] libphy: b132400.mdio: probed [ 8.832483] davinci_mdio b132400.mdio: phy[0]: device b132400.mdio:00, driver TI DP83867 [ 8.842030] davinci_mdio b132400.mdio: phy[3]: device b132400.mdio:03, driver TI DP83867 [ 8.851991] pruss b200000.icssg: creating PRU cores and other child platform devices [ 8.864218] remoteproc remoteproc8: b234000.pru is available [ 8.870265] pru-rproc b234000.pru: PRU rproc node /soc0/pruss_soc_bus@b226004/icssg@0/pru@34000 probed successfully [ 8.882904] remoteproc remoteproc9: b204000.rtu is available [ 8.888767] pru-rproc b204000.rtu: PRU rproc node /soc0/pruss_soc_bus@b226004/icssg@0/rtu@4000 probed successfully [ 8.900609] remoteproc remoteproc10: b238000.pru is available [ 8.906576] pru-rproc b238000.pru: PRU rproc node /soc0/pruss_soc_bus@b226004/icssg@0/pru@38000 probed successfully [ 8.920517] remoteproc remoteproc11: b206000.rtu is available [ 8.929990] pru-rproc b206000.rtu: PRU rproc node /soc0/pruss_soc_bus@b226004/icssg@0/rtu@6000 probed successfully [ 8.944189] icssg-prueth pruss1_eth: TI PRU ethernet driver initialized: dual EMAC mode [ 9.036513] davinci_mdio b232400.mdio: davinci mdio revision 1.7, bus freq 1000000 [ 9.044356] libphy: b232400.mdio: probed [ 9.103271] davinci_mdio b232400.mdio: phy[0]: device b232400.mdio:00, driver TI DP83867 [ 9.111662] davinci_mdio b232400.mdio: phy[3]: device b232400.mdio:03, driver TI DP83867 [ 9.131411] k3_r5_rproc soc0:mcu_r5f_cluster@41000000: creating child devices for R5F cores [ 9.151034] icssg-prueth pruss2_eth: TI PRU ethernet driver initialized: dual EMAC mode [ 9.161425] platform 41000000.r5f: boot_vector = 0x41c00000, cfg = 0x1903 ctrl = 0x0 stat = 0x104 [ 9.177020] platform 41000000.r5f: assigned reserved memory node r5f0-dma-memory@9c000000 [ 9.188192] remoteproc remoteproc12: 41000000.r5f is available [ 9.413186] remoteproc remoteproc12: powering up 41000000.r5f [ 9.419184] remoteproc remoteproc12: Booting fw image am65x-mcu-r5f0-fw, size 3864336 [ 9.435687] platform 41000000.r5f: booting R5F core using boot addr = 0x0 [ 9.446558] remoteproc remoteproc12: registered virtio0 (type 7) [ 9.454132] remoteproc remoteproc12: remote processor 41000000.r5f is now up [ OK ] Started TI IPC Daemon. [ OK ] Started RPC Bind Service. [ 9.478330] NET: Registered protocol family 15 [ OK ] Found device /dev/ttyS2. [ OK ] Started Network Service. [ 9.547443] am65-cpsw-nuss 46000000.ethernet: Phy mode driver DT not found [ OK ] Started Login Service. [ OK ] Reached target Network. Starting Permit User Sessions... [ 9.576373] TI DP83867 k3-cpsw-mdio:00: attached PHY driver [TI DP83867] (mii_bus:phy_addr=k3-cpsw-mdio:00, irq=POLL) Starting Simple Network Management Protocol (SNMP) Daemon.... [ 9.591094] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Starting Lightning Fast Webserver With Light System Requirements... Starting Network Name Resolution... [ OK ] Started Permit User Sessions. [ OK ] Started Serial Getty on ttyS2. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... [FAILED] Failed to start Synchronize System and HW clocks. See 'systemctl status sync-clocks.service' for details. [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ 9.938336] Initializing XFRM netlink socket [ OK ] Started Network Name Resolution. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started NFS status monitor for NFSv2/3 locking.. [ 10.192249] remoteproc remoteproc0: powering up b034000.pru [ 10.231033] remoteproc remoteproc0: Booting fw image ti-pruss/am65x-pru0-prueth-fw.elf, size 15120 [ 10.242754] remoteproc remoteproc0: remote processor b034000.pru is now up [ 10.252656] remoteproc remoteproc1: powering up b004000.rtu [ 10.265687] remoteproc remoteproc1: Booting fw image ti-pruss/am65x-rtu0-prueth-fw.elf, size 16552 [ 10.276320] remoteproc remoteproc1: remote processor b004000.rtu is now up [ 10.287610] icssg-prueth pruss0_eth: setting rx flow id 150 [ 10.297778] net eth1: started [ 10.301422] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 10.331919] virtio_rpmsg_bus virtio0: rpmsg host is online [ 10.337657] virtio_rpmsg_bus virtio0: creating channel rpmsg-proto addr 0x3d [ 10.357963] remoteproc remoteproc6: powering up b138000.pru [ 10.376343] remoteproc remoteproc6: Booting fw image ti-pruss/am65x-pru1-prueth-fw.elf, size 15040 [ 10.388098] remoteproc remoteproc6: remote processor b138000.pru is now up [ 10.395765] remoteproc remoteproc7: powering up b106000.rtu [ 10.431522] remoteproc remoteproc7: Booting fw image ti-pruss/am65x-rtu1-prueth-fw.elf, size 16568 [ 10.441561] remoteproc remoteproc7: remote processor b106000.rtu is now up [ 10.450621] icssg-prueth pruss1_eth: setting rx flow id 151 [ 10.457513] net eth4: started [ 10.460898] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready [ 10.461682] usbcore: registered new interface driver usbfs [ 10.461729] usbcore: registered new interface driver hub [ 10.461860] usbcore: registered new device driver usb [ 10.489655] remoteproc remoteproc4: powering up b134000.pru [ 10.495649] remoteproc remoteproc4: Booting fw image ti-pruss/am65x-pru0-prueth-fw.elf, size 15120 [ 10.504857] remoteproc remoteproc4: remote processor b134000.pru is now up [ 10.511860] remoteproc remoteproc5: powering up b104000.rtu [ 10.517605] remoteproc remoteproc5: Booting fw image ti-pruss/am65x-rtu0-prueth-fw.elf, size 16552 [ 10.526810] remoteproc remoteproc5: remote processor b104000.rtu is now up [ 10.535774] icssg-prueth pruss1_eth: setting rx flow id 152 [ 10.542484] net eth3: started [ 10.545756] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 10.557795] remoteproc remoteproc2: powering up b038000.pru [ 10.563553] remoteproc remoteproc2: Booting fw image ti-pruss/am65x-pru1-prueth-fw.elf, size 15040 [ 10.572591] remoteproc remoteproc2: remote processor b038000.pru is now up [ 10.579530] remoteproc remoteproc3: powering up b006000.rtu [ 10.585381] remoteproc remoteproc3: Booting fw image ti-pruss/am65x-rtu1-prueth-fw.elf, size 16568 [ 10.594404] remoteproc remoteproc3: remote processor b006000.rtu is now up [ 10.597765] am65-cpsw-nuss 46000000.ethernet eth0: Link is Down [ 10.609265] icssg-prueth pruss0_eth: setting rx flow id 153 [ 10.615934] net eth2: started [ 10.619184] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 10.647427] remoteproc remoteproc10: powering up b238000.pru [ 10.653658] remoteproc remoteproc10: Booting fw image ti-pruss/am65x-pru1-prueth-fw.elf, size 15040 [ 10.662853] remoteproc remoteproc10: remote processor b238000.pru is now up [ 10.669934] remoteproc remoteproc11: powering up b206000.rtu [ 10.675981] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 10.675987] remoteproc remoteproc11: Booting fw image ti-pruss/am65x-rtu1-prueth-fw.elf, size 16568 [ 10.676021] remoteproc remoteproc11: remote processor b206000.rtu is now up [ 10.678041] icssg-prueth pruss2_eth: setting rx flow id 154 [ 10.679121] net eth6: started [ 10.679800] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready [ 10.712467] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 10.720937] xhci-hcd xhci-hcd.0.auto: hcc params 0x0298fe6d hci version 0x110 quirks 0x00010010 [ 10.729784] xhci-hcd xhci-hcd.0.auto: irq 298, io mem 0x04010000 [ 10.736033] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 10.736366] remoteproc remoteproc8: powering up b234000.pru [ 10.736521] remoteproc remoteproc8: Booting fw image ti-pruss/am65x-pru0-prueth-fw.elf, size 15120 [ 10.736560] remoteproc remoteproc8: remote processor b234000.pru is now up [ 10.736578] remoteproc remoteproc9: powering up b204000.rtu [ 10.736645] remoteproc remoteproc9: Booting fw image ti-pruss/am65x-rtu0-prueth-fw.elf, size 16552 [ 10.736672] remoteproc remoteproc9: remote processor b204000.rtu is now up [ 10.738687] icssg-prueth pruss2_eth: setting rx flow id 155 [ 10.739782] net eth5: started [ 10.739987] IPv6: ADDRCONF(NETDEV_UP): eth5: link is not ready [ 10.800263] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.807517] usb usb1: Product: xHCI Host Controller [ 10.812447] usb usb1: Manufacturer: Linux 4.14.79-gbde58ab01e xhci-hcd [ 10.819017] usb usb1: SerialNumber: xhci-hcd.0.auto [ 10.824737] hub 1-0:1.0: USB hub found [ 10.828642] hub 1-0:1.0: 1 port detected [ 10.833290] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 10.838871] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 10.846610] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 10.853355] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 10.861620] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 10.868443] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.875731] usb usb2: Product: xHCI Host Controller [ 10.880643] usb usb2: Manufacturer: Linux 4.14.79-gbde58ab01e xhci-hcd [ 10.887205] usb usb2: SerialNumber: xhci-hcd.0.auto [ 10.892835] hub 2-0:1.0: USB hub found [ 10.896664] hub 2-0:1.0: 1 port detected [ OK ] Started Simple Network Management Protocol (SNMP) Daemon.. [ 11.082463] NET: Registered protocol family 44 [ 11.645458] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 12.513969] icssg-prueth pruss1_eth eth4: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.522012] IPv6: ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready [ 12.581985] IPv6: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready [ 12.582663] icssg-prueth pruss1_eth eth3: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.773951] icssg-prueth pruss2_eth eth5: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.782001] IPv6: ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready [ OK ] Started rc.pvr.service. Starting weston.service... [ OK ] Started weston.service. Starting Matrix GUI... Starting telnetd.service... [ OK ] Started telnetd.service. Starting thttpd.service... [ OK ] Started Matrix GUI. [ OK ] Started thttpd.service. Starting rng-tools.service... _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am65xx-evm ttyS2 Arago 2018.10 am65xx-evm ttyS2 am65xx-evm login: *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf bash binutils cifs-utils cpio cpp-symlinks cpp dosfstools elfutils g++-symlinks g++ gawk gcc-symlinks gcc gdb gdbserver gettext glmark2 gstreamer1.0-libav gzip hidapi libdw1 libelf1 libgdbm-compat4 libgdbm4 libgettextlib libgettextsrc libgmp10 libidn11 libmpc3 libmpfr4 libreadline7 libunistring2 m4 make nettle parted python3-pycairo which If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am65xx-evm ttyS2 Arago 2018.10 am65xx-evm ttyS2 am65xx-evm login: root root@am65xx-evm:~# ifconfig eth0 Link encap:Ethernet HWaddr F4:84:4C:ED:34:C5 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 70:FF:76:1D:57:BA UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth2 Link encap:Ethernet HWaddr 70:FF:76:1D:57:BB UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth3 Link encap:Ethernet HWaddr 70:FF:76:1D:57:BC inet6 addr: fe80::72ff:76ff:fe1d:57bc%4915360/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:31 errors:0 dropped:0 overruns:0 frame:0 TX packets:34 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10450 (10.2 KiB) TX bytes:5228 (5.1 KiB) eth4 Link encap:Ethernet HWaddr 70:FF:76:1D:57:BD inet6 addr: fe80::72ff:76ff:fe1d:57bd%4915360/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:31 errors:0 dropped:0 overruns:0 frame:0 TX packets:35 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10450 (10.2 KiB) TX bytes:5330 (5.2 KiB) eth5 Link encap:Ethernet HWaddr 70:FF:76:1D:52:9A inet6 addr: fe80::72ff:76ff:fe1d:529a%4915360/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:28 errors:0 dropped:0 overruns:0 frame:0 TX packets:34 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9448 (9.2 KiB) TX bytes:5492 (5.3 KiB) eth6 Link encap:Ethernet HWaddr 70:FF:76:1D:52:9B UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1%4915360/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:171 errors:0 dropped:0 overruns:0 frame:0 TX packets:171 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:13236 (12.9 KiB) TX bytes:13236 (12.9 KiB) root@am65xx-evm:~# [ 461.157758] Unable to handle kernel paging request at virtual address 68ead29b10 [ 461.165171] Mem abort info: [ 461.167957] Exception class = DABT (current EL), IL = 32 bits [ 461.173885] SET = 0, FnV = 0 [ 461.176950] EA = 0, S1PTW = 0 [ 461.180081] Data abort info: [ 461.182975] ISV = 0, ISS = 0x00000046 [ 461.186824] CM = 0, WnR = 1 [ 461.189808] user pgtable: 64k pages, 48-bit VAs, pgd = ffff8008411f9400 [ 461.196435] [00000068ead29b10] *pgd=00000008c4bf0003, *pud=00000008c4bf0003, *pmd=0000000000000000 [ 461.205410] Internal error: Oops: 96000046 [#1] PREEMPT SMP [ 461.210980] Modules linked in: sha512_arm64 md5 des_generic cbc rpmsg_proto xhci_plat_hcd xhci_hcd usbcore virtio_rpmsg_bus rpmsg_core dwc3 udc_core ti_am335x_adc usb_common kfifo_buf xfrm_user xfrm4_tunnel tunnel4 ipcomp xfrm_ipcomp esp4 ah4 af_key xfrm_algo ti_k3_r5_remoteproc pci_endpoint_test at24 pruss_soc_bus omap_rng rng_core sa2ul authenc phy_omap_usb2 m_can can_dev ti_am335x_tscadc dwc3_of_simple pvrsrvkm(O) icssg_prueth pru_rproc pruss pruss_intc crc32_ce crct10dif_ce remoteproc gpio_decoder input_polldev sch_fq_codel cryptodev(O) ipv6 [ 461.259323] CPU: 0 PID: 7 Comm: ksoftirqd/0 Tainted: G O 4.14.79-gbde58ab01e #1 [ 461.267742] Hardware name: Texas Instruments AM654 Base Board (DT) [ 461.273908] task: ffff8008401c4800 task.stack: ffff000008e80000 [ 461.279845] PC is at emac_napi_rx_poll+0x160/0x2b0 [icssg_prueth] [ 461.285938] LR is at emac_napi_rx_poll+0x160/0x2b0 [icssg_prueth] [ 461.292017] pc : [] lr : [] pstate: 60000145 [ 461.299394] sp : ffff000008e8fc60 [ 461.302699] x29: ffff000008e8fc60 x28: ffff0000087e0110 [ 461.308001] x27: ffff800842ccd9c0 x26: 00000068ead29b00 [ 461.313303] x25: ffff80084004d010 x24: ffff800842ccdae0 [ 461.318604] x23: 0000000000000040 x22: 0000000040000272 [ 461.323907] x21: ffff800842ccd900 x20: ffff800842ccd000 [ 461.329210] x19: 0000000000000000 x18: 0000ffffe178b49d [ 461.334512] x17: 0000ffff8cd4d2d0 x16: ffff0000087e18d8 [ 461.339813] x15: 0000000000000000 x14: 0000000000000000 [ 461.345114] x13: 0000000000000000 x12: ffff800845dbbb80 [ 461.350416] x11: 0000000000000001 x10: 00000000ffffffef [ 461.355719] x9 : 0000000000000000 x8 : 0000000000000000 [ 461.361020] x7 : 0000400000000000 x6 : ffff80087ff30000 [ 461.366323] x5 : 0000000000000000 x4 : ffff800845dbbbb0 [ 461.371624] x3 : ffff800845dbbb90 x2 : 0000000000000000 [ 461.376926] x1 : 0000000000000040 x0 : 0000000000000000 [ 461.382231] Process ksoftirqd/0 (pid: 7, stack limit = 0xffff000008e80000) [ 461.389088] Call trace: [ 461.391529] Exception stack(0xffff000008e8fb20 to 0xffff000008e8fc60) [ 461.397957] fb20: 0000000000000000 0000000000000040 0000000000000000 ffff800845dbbb90 [ 461.405772] fb40: ffff800845dbbbb0 0000000000000000 ffff80087ff30000 0000400000000000 [ 461.413586] fb60: 0000000000000000 0000000000000000 00000000ffffffef 0000000000000001 [ 461.421401] fb80: ffff800845dbbb80 0000000000000000 0000000000000000 0000000000000000 [ 461.429214] fba0: ffff0000087e18d8 0000ffff8cd4d2d0 0000ffffe178b49d 0000000000000000 [ 461.437029] fbc0: ffff800842ccd000 ffff800842ccd900 0000000040000272 0000000000000040 [ 461.444844] fbe0: ffff800842ccdae0 ffff80084004d010 00000068ead29b00 ffff800842ccd9c0 [ 461.452659] fc00: ffff0000087e0110 ffff000008e8fc60 ffff000001492620 ffff000008e8fc60 [ 461.460473] fc20: ffff000001492620 0000000060000145 ffff800842ccd900 0000000040000272 [ 461.468289] fc40: ffffffffffffffff ffff000008449a60 ffff000008e8fc60 ffff000001492620 [ 461.476115] [] emac_napi_rx_poll+0x160/0x2b0 [icssg_prueth] [ 461.483246] [] net_rx_action+0xf4/0x2b0 [ 461.488639] [] __do_softirq+0x12c/0x228 [ 461.494028] [] run_ksoftirqd+0x40/0x68 [ 461.499333] [] smpboot_thread_fn+0x158/0x240 [ 461.505156] [] kthread+0x12c/0x130 [ 461.510111] [] ret_from_fork+0x10/0x18 [ 461.515413] Code: f94037a5 f9400300 aa0503e1 95bee851 (f9000b54) [ 461.521502] ---[ end trace 3c4c93623230318a ]--- [ 461.526110] Kernel panic - not syncing: Fatal exception in interrupt [ 461.532449] SMP: stopping secondary CPUs [ 461.536365] Kernel Offset: disabled [ 461.539844] CPU features: 0x080200c [ 461.543321] Memory Limit: none [ 461.546369] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Broadcast message from systemd-journald@am65xx-evm (Sun 2018-12-16 03:30:05 UTC): kernel[276]: [ 461.205410] Internal error: Oops: 96000046 [#1] PREEMPT SMP