U-Boot SPL 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000) SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.6--w2023.01-j722s (Kool Koa') SPL initial stack usage: 17064 bytes Trying to boot from MMC2 Authentication passed Authentication passed Authentication passed Authentication passed Authentication passed Starting ATF on ARM64 core... NOTICE: BL31: v2.10.0(release):v2.10.0-367-g00f1ec6b87-dirty NOTICE: BL31: Built : 16:09:05, Feb 9 2024 NOTICE: Upgrade Firmwares for Power off functionality ERROR: Failed to get response (-19) ERROR: Transfer send failed (-19) ERROR: Unable to query firmware capabilities (-19) U-Boot SPL 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000) SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.6--w2023.01-j722s (Kool Koa') Trying to boot from MMC2 Authentication passed Authentication passed U-Boot 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000) SoC: J722S SR1.0 HS-FS Model: Texas Instruments J722S EVM Reading on-board EEPROM at 0x51 failed -1 Board: J722SX-EVM rev E1 DRAM: 2 GiB (effective 8 GiB) Core: 70 devices, 27 uclasses, devicetree: separate MMC: mmc@fa10000: 0, mmc@fa00000: 1 Loading Environment from nowhere... OK In: serial@2800000 Out: serial@2800000 Err: serial@2800000 Net: Warning: ethernet@8000000port@1 (eth0) using random MAC address - a2:79:59:19:2b:17 eth0: ethernet@8000000port@1 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device SD/MMC found on device 1 Failed to load 'boot.scr' 1011 bytes read in 33 ms (29.3 KiB/s) Loaded env from uEnv.txt Importing environment from mmc1 ... Running uenvcmd ... ## Error: "main_cpsw0_qsgmii_phyinit" not defined 50100 bytes read in 39 ms (1.2 MiB/s) Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) devices Load Remote Processor 0 with data@addr=0x82000000 50100 bytes: Success! 887712 bytes read in 73 ms (11.6 MiB/s) Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) devices Load Remote Processor 2 with data@addr=0x82000000 887712 bytes: Success! 11722864 bytes read in 522 ms (21.4 MiB/s) Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) devices Load Remote Processor 3 with data@addr=0x82000000 11722864 bytes: Success! 11722864 bytes read in 522 ms (21.4 MiB/s) Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) devices Load Remote Processor 4 with data@addr=0x82000000 11722864 bytes: Success! 19376640 bytes read in 837 ms (22.1 MiB/s) 71313 bytes read in 37 ms (1.8 MiB/s) Working FDT set to 88000000 7405 bytes read in 36 ms (200.2 KiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Working FDT set to 88000000 ERROR: reserving fdt memory region failed (addr=880000000 size=20000000 flags=4) Loading Device Tree to 000000008feeb000, end 000000008fffffff ... OK Working FDT set to 8feeb000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.1.80-ti-g2e423244f8c0 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Wed Mar 20 14:43:33 UTC 2024 [ 0.000000] Machine model: Texas Instruments J722S EVM [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [ 0.000000] printk: bootconsole [ns16550a0] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a0000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a0100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a1000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a1100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a2000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 31 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a2100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5000000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-rtos-ipc-memory-region@a5000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 96 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-dma-memory@a7000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ad000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71-dma-memory@ad000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ad100000, size 63 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_0-memory@ad100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b1000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_1-dma-memory@b1000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b1100000, size 63 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_1-memory1b1100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b5000000, size 40 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-core-heap-memory-lo@b5000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000880000000, size 512 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-core-heap-memory-hi@880000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: initialized node vision_apps_shared-memories, compatible id dma-heap-carveout [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000980000000, size 896 MiB [ 0.000000] OF: reserved mem: initialized node linux-cma-buffers@980000000, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000009ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e77ffff] [ 0.000000] node 0: [mem 0x000000009e780000-0x00000000a3ffffff] [ 0.000000] node 0: [mem 0x00000000a4000000-0x00000000a4ffffff] [ 0.000000] node 0: [mem 0x00000000a5000000-0x00000000b77fffff] [ 0.000000] node 0: [mem 0x00000000b7800000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000880000000-0x000000089fffffff] [ 0.000000] node 0: [mem 0x00000008a0000000-0x00000009ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000009ffffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.4 [ 0.000000] percpu: Embedded 20 pages/cpu s41064 r8192 d32664 u81920 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2064384 [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256kt [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB) [ 0.000000] Memory: 5784368K/8388608K available (11712K kernel code, 1258K rwdata, 3812K rodata, 1984K init, 438K bss, 1686736K reserved, 917504K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @8a0800000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x00000008a0040000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000008a0050000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [ 0.000001] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [ 0.008532] Console: colour dummy device 80x25 [ 0.013120] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) [ 0.023790] pid_max: default: 32768 minimum: 301 [ 0.028549] LSM: Security Framework initializing [ 0.033379] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.041138] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.050849] cblist_init_generic: Setting adjustable number of callback queues. [ 0.058276] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.064560] cblist_init_generic: Setting adjustable number of callback queues. [ 0.071948] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.078310] rcu: Hierarchical SRCU implementation. [ 0.083210] rcu: Max phase no-delay instances is 1000. [ 0.088769] Platform MSI: msi-controller@1820000 domain created [ 0.095088] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [ 0.104528] EFI services will not be available. [ 0.109403] smp: Bringing up secondary CPUs ... [ 0.114620] Detected VIPT I-cache on CPU1 [ 0.114714] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [ 0.114731] GICv3: CPU1: using allocated LPI pending table @0x00000008a0060000 [ 0.114782] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.115406] Detected VIPT I-cache on CPU2 [ 0.115477] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [ 0.115491] GICv3: CPU2: using allocated LPI pending table @0x00000008a0070000 [ 0.115521] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.116078] Detected VIPT I-cache on CPU3 [ 0.116150] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [ 0.116163] GICv3: CPU3: using allocated LPI pending table @0x00000008a0080000 [ 0.116191] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.116257] smp: Brought up 1 node, 4 CPUs [ 0.195892] SMP: Total of 4 processors activated. [ 0.200698] CPU features: detected: 32-bit EL0 Support [ 0.205963] CPU features: detected: CRC32 instructions [ 0.211263] CPU: All CPU(s) started at EL2 [ 0.215455] alternatives: applying system-wide alternatives [ 0.222735] devtmpfs: initialized [ 0.236781] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.246776] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.281666] pinctrl core: initialized pinctrl subsystem [ 0.287612] DMI not present or invalid. [ 0.292098] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.299188] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.306618] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.314735] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.323018] audit: initializing netlink subsys (disabled) [ 0.328724] audit: type=2000 audit(0.224:1): state=initialized audit_enabled=0 res=1 [ 0.329147] thermal_sys: Registered thermal governor 'step_wise' [ 0.336640] thermal_sys: Registered thermal governor 'power_allocator' [ 0.342918] cpuidle: using governor menu [ 0.353740] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.360751] ASID allocator initialised with 65536 entries [ 0.379064] KASLR disabled due to lack of seed [ 0.389814] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.396775] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.403176] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.410109] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.416509] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.423440] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.429840] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.436770] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.444430] k3-chipinfo 43000014.chipid: Family:J722S rev:SR1.0 JTAGID[0x0bba002f] Detected [ 0.454425] iommu: Default domain type: Translated [ 0.459433] iommu: DMA domain TLB invalidation policy: strict mode [ 0.466086] SCSI subsystem initialized [ 0.470228] usbcore: registered new interface driver usbfs [ 0.475864] usbcore: registered new interface driver hub [ 0.481311] usbcore: registered new device driver usb [ 0.486867] pps_core: LinuxPPS API ver. 1 registered [ 0.491940] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.501277] PTP clock support registered [ 0.505399] EDAC MC: Ver: 3.0.0 [ 0.509398] omap-mailbox 29000000.mailbox: omap mailbox rev 0x66fca100 [ 0.516216] omap-mailbox 29010000.mailbox: omap mailbox rev 0x66fca100 [ 0.523013] omap-mailbox 29020000.mailbox: omap mailbox rev 0x66fca100 [ 0.529852] omap-mailbox 29030000.mailbox: omap mailbox rev 0x66fca100 [ 0.536860] FPGA manager framework [ 0.540407] Advanced Linux Sound Architecture Driver Initialized. [ 0.547469] clocksource: Switched to clocksource arch_sys_counter [ 0.553926] VFS: Disk quotas dquot_6.6.0 [ 0.557972] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.570621] Carveout Heap: Exported 512 MiB at 0x0000000900000000 [ 0.576963] NET: Registered PF_INET protocol family [ 0.582250] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.595201] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.604036] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.611965] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.620481] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.629831] TCP: Hash tables configured (established 65536 bind 65536) [ 0.636696] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.643800] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.651496] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.657690] RPC: Registered named UNIX socket transport module. [ 0.663765] RPC: Registered udp transport module. [ 0.668568] RPC: Registered tcp transport module. [ 0.673370] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.679952] NET: Registered PF_XDP protocol family [ 0.684855] PCI: CLS 0 bytes, default 64 [ 0.689527] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.699409] Initialise system trusted keyrings [ 0.704158] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.714828] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.721349] NFS: Registering the id_resolver key type [ 0.726589] Key type id_resolver registered [ 0.730861] Key type id_legacy registered [ 0.735005] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.741852] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.783867] Key type asymmetric registered [ 0.788054] Asymmetric key parser 'x509' registered [ 0.793083] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.800779] io scheduler mq-deadline registered [ 0.805411] io scheduler kyber registered [ 0.812716] pinctrl-single 4084000.pinctrl: 34 pins, size 136 [ 0.819128] pinctrl-single f4000.pinctrl: 171 pins, size 684 [ 0.831131] Serial: 8250/16550 driver, 12 ports, IRQ sharing enabled [ 0.846205] loop: module loaded [ 0.850621] megasas: 07.719.03.00-rc1 [ 0.857242] tun: Universal TUN/TAP device driver, 1.6 [ 0.863130] VFIO - User Level meta-driver version: 0.3 [ 0.869094] usbcore: registered new interface driver usb-storage [ 0.875770] i2c_dev: i2c /dev entries driver [ 0.881233] sdhci: Secure Digital Host Controller Interface driver [ 0.887582] sdhci: Copyright(c) Pierre Ossman [ 0.892225] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.898742] ledtrig-cpu: registered to indicate activity on CPUs [ 0.905054] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 0.911974] usbcore: registered new interface driver usbhid [ 0.917669] usbhid: USB HID core driver [ 0.922399] optee: probing for conduit method. [ 0.926979] optee: revision 4.1 (012cdca4) [ 0.927248] optee: dynamic shared memory is enabled [ 0.936656] optee: initialized driver [ 0.942165] Initializing XFRM netlink socket [ 0.946581] NET: Registered PF_PACKET protocol family [ 0.951809] Key type dns_resolver registered [ 0.956532] registered taskstats version 1 [ 0.960740] Loading compiled-in X.509 certificates [ 0.973475] ti-sci 44043000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.0.6--w2023.01-j722s (Kool Koa') [ 1.027767] omap_i2c 2b200000.i2c: bus 0 rev0.12 at 400 kHz [ 1.034459] pca953x 1-0023: supply vcc not found, using dummy regulator [ 1.041351] pca953x 1-0023: using AI [ 1.068128] gpio-488 (TRC_MUX_SEL): hogged as output/low [ 1.074060] omap_i2c 20000000.i2c: bus 1 rev0.12 at 400 kHz [ 1.079972] ti-sci-intr 4210000.interrupt-controller: Interrupt Router 5 domain created [ 1.088277] ti-sci-intr bus@f0000:interrupt-controller@a00000: Interrupt Router 3 domain created [ 1.097485] ti-sci-inta 48000000.interrupt-controller: Interrupt Aggregator domain 28 created [ 1.106452] ti-sci-inta 4e400000.interrupt-controller: Interrupt Aggregator domain 200 created [ 1.120172] ti-udma 485c0100.dma-controller: Number of rings: 82 [ 1.128115] ti-udma 485c0100.dma-controller: Channels: 44 (bchan: 16, tchan: 12, rchan: 16) [ 1.138682] ti-udma 485c0000.dma-controller: Number of rings: 150 [ 1.148424] ti-udma 485c0000.dma-controller: Channels: 35 (tchan: 20, rchan: 15) [ 1.157737] ti-udma 4e230000.dma-controller: Number of rings: 40 [ 1.164945] ti-udma 4e230000.dma-controller: Channels: 20 (bchan: 0, tchan: 8, rchan: 12) [ 1.174963] printk: console [ttyS2] disabled [ 1.179401] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 274, base_baud = 3000000) is a 8250 [ 1.188262] printk: console [ttyS2] enabled [ 1.188262] printk: console [ttyS2] enabled [ 1.196715] printk: bootconsole [ns16550a0] disabled [ 1.196715] printk: bootconsole [ns16550a0] disabled [ 1.208908] spi-nand spi0.0: Winbond SPI NAND was found. [ 1.214243] spi-nand spi0.0: 128 MiB, block size: 256 KiB, page size: 4096, OOB size: 128 [ 1.222603] 7 fixed-partitions partitions found on MTD device spi0.0 [ 1.228962] Creating 7 MTD partitions on "spi0.0": [ 1.233746] 0x000000000000-0x000000080000 : "ospi_nand.tiboot3" [ 1.241048] 0x000000080000-0x000000280000 : "ospi_nand.tispl" [ 1.248656] 0x000000280000-0x000000680000 : "ospi_nand.u-boot" [ 1.257044] 0x000000680000-0x0000006c0000 : "ospi_nand.env" [ 1.263760] 0x0000006c0000-0x000000700000 : "ospi_nand.env.backup" [ 1.271090] 0x000002000000-0x000007fc0000 : "ospi_nand.rootfs" [ 1.313743] 0x000007fc0000-0x000008000000 : "ospi_nand.phypattern" [ 1.359510] davinci_mdio 8000f00.mdio: davinci mdio revision 17.7, bus freq 1000000 [ 1.369162] davinci_mdio 8000f00.mdio: phy[0]: device 8000f00.mdio:00, driver TI DP83867 [ 1.377297] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01903, cpsw version 0x6BA81903 Ports: 3 quirks:00000006 [ 1.390148] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [ 1.396416] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [ 1.403541] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [ 1.410054] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010d, freq:500000000, add_val:1 pps:0 [ 1.420412] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [ 1.428254] cpu cpu0: _of_add_opp_table_v2: no supported OPPs [ 1.434053] cpu cpu0: OPP table can't be empty [ 1.439760] mmc0: CQHCI version 5.10 [ 1.451248] debugfs: Directory 'pd:249' with parent 'pm_genpd' already present! [ 1.451289] mmc1: CQHCI version 5.10 [ 1.458629] debugfs: Directory 'pd:248' with parent 'pm_genpd' already present! [ 1.469483] debugfs: Directory 'pd:247' with parent 'pm_genpd' already present! [ 1.476961] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [ 1.484321] debugfs: Directory 'pd:244' with parent 'pm_genpd' already present! [ 1.484720] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [ 1.492976] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [ 1.502810] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [ 1.506429] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [ 1.527427] ALSA device list: [ 1.530417] No soundcards found. [ 1.534144] Waiting for root device PARTUUID=16b24a2c-02... [ 1.574578] mmc1: new ultra high speed SDR104 SDHC card at address aaaa [ 1.581864] mmcblk1: mmc1:aaaa SL32G 29.7 GiB [ 1.591025] mmcblk1: p1 p2 [ 1.611484] mmc0: Command Queue Engine enabled [ 1.615959] mmc0: new HS400 MMC card at address 0001 [ 1.621588] mmcblk0: mmc0:0001 G1M15L 29.6 GiB [ 1.627572] mmcblk0: p1 p2 [ 1.631019] mmcblk0boot0: mmc0:0001 G1M15L 31.5 MiB [ 1.637172] mmcblk0boot1: mmc0:0001 G1M15L 31.5 MiB [ 1.643261] mmcblk0rpmb: mmc0:0001 G1M15L 4.00 MiB, chardev (240:0) [ 1.909573] EXT4-fs (mmcblk1p2): recovery complete [ 1.915426] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Quota mode: none. [ 1.924038] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.933885] devtmpfs: mounted [ 1.937442] Freeing unused kernel memory: 1984K [ 1.942063] Run /sbin/init as init process [ 2.093964] systemd[1]: System time before build time, advancing clock. [ 2.139636] NET: Registered PF_INET6 protocol family [ 2.145574] Segment Routing with IPv6 [ 2.149291] In-situ OAM (IOAM) with IPv6 [ 2.177486] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -L) [ 2.209264] systemd[1]: Detected architecture arm64. Welcome to Arago 2023.10! [ 2.270558] systemd[1]: Hostname set to . [ 2.363993] systemd-sysv-generator[155]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to. [ 2.608312] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the set. [ 2.679194] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the . [ 2.763681] systemd[1]: Queued start job for default target Graphical Interface. [ 2.835271] systemd[1]: Created slice Slice /system/getty. [ OK ] Created slice Slice /system/getty. [ 2.858453] systemd[1]: Created slice Slice /system/modprobe. [ OK ] Created slice Slice /system/modprobe. [ 2.882374] systemd[1]: Created slice Slice /system/serial-getty. [ OK ] Created slice Slice /system/serial-getty. [ 2.905700] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 2.927915] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 2.951784] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 2.975908] systemd[1]: Reached target Path Units. [ OK ] Reached target Path Units. [ 2.991618] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 3.011583] systemd[1]: Reached target Slice Units. [ OK ] Reached target Slice Units. [ 3.027616] systemd[1]: Reached target Swaps. [ OK ] Reached target Swaps. [ 3.084886] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 3.111728] systemd[1]: Reached target RPC Port Mapper. [ OK ] Reached target RPC Port Mapper. [ 3.140236] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 3.163962] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 3.188360] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 3.212139] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 3.236144] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 3.252357] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 3.276315] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 3.300067] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 3.320110] systemd[1]: Listening on User Database Manager Socket. [ OK ] Listening on User Database Manager Socket. [ 3.371936] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 3.392441] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 3.420383] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 3.436045] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [ 3.456465] systemd[1]: Mounting Temporary Directory /tmp... Mounting Temporary Directory /tmp... [ 3.477582] systemd[1]: Starting Create List of Static Device Nodes... Starting Create List of Static Device Nodes... [ 3.516233] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 3.536415] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 3.556533] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 3.571199] fuse: init (API version 7.37) [ 3.592777] systemd[1]: Starting Start psplash boot splash screen... Starting Start psplash boot splash screen... [ 3.656267] systemd[1]: Starting RPC Bind... Starting RPC Bind... [ 3.671889] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [ 3.691324] systemd[1]: Starting Journal Service... Starting Journal Service... [ 3.718249] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 3.741580] cryptodev: loading out-of-tree module taints kernel. [ 3.741856] systemd[1]: Starting Generate network units from Kernel command line... Starting Generate network …ts from Kernel co[ 3.756104] cryptodev: driver 1.12 loaded. mmand line... [ 3.781010] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 3.806961] EXT4-fs (mmcblk1p2): re-mounted. Quota mode: none. [ 3.809922] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 3.846394] systemd[1]: Started RPC Bind. [ OK ] Started RPC Bind. [ 3.868275] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted Temporary Directory /tmp. [ OK ] Finished Create List of Static Device Nodes. [ OK ] Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module fuse. [FAILED] Failed to start Start psplash boot splash screen. See 'systemctl status psplash-start.service' for details. [DEPEND] Dependency failed for Star…progress communication helper. [ OK ] Finished Load Kernel Modules. [ OK ] Finished Generate network units from Kernel command line. [ OK ] Finished Remount Root and Kernel File Systems. Mounting FUSE Control File System... Mounting Kernel Configuration File System... Starting Flush Journal to Persistent Storage... [ 4.236856] systemd-journald[172]: Received client request to flush runtime journal. Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev... [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Preparation for Local File Systems. Mounting /media/ram... Mounting /var/volatile... [ 4.448637] audit: type=1334 audit(1651167747.352:2): prog-id=5 op=LOAD [ 4.455655] audit: type=1334 audit(1651167747.356:3): prog-id=6 op=LOAD Starting Rule-based Manage…for Device Events and Files... [ OK ] Finished Coldplug All udev Devices. [ OK ] Mounted /media/ram. [ OK ] Mounted /var/volatile. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Record System Boot/Shutdown in UTMP... [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Finished Record System Boot/Shutdown in UTMP. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Initialization. [ 5.100147] mc: Linux media interface: v0.10 [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target System Time Set. [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timer Units. [ 5.159343] videodev: Linux video capture interface: v2.00 [ OK ] Listening on Avahi mDNS/DNS-SD Stac[ 5.180366] k3-dsp-rproc 7e000000.dsp: assigned reserved memory node vision-apps-c71-dma-memory@ad000000 k Activation Socket. [ 5.193243] k3-dsp-rproc 7e000000.dsp: configured DSP for IPC-only mode [ OK ] Listening on D-Bus System Message B[ 5.210167] remoteproc remoteproc0: 7e000000.dsp is available us Socket. [ 5.216097] remoteproc remoteproc0: attaching to 7e000000.dsp [ 5.224717] k3-dsp-rproc 7e000000.dsp: DSP initialized in IPC-only mode [ 5.231683] rproc-virtio rproc-virtio.0.auto: assigned reserved memory node vision-apps-c71-dma-memory@ad000000 Starting Docker Socket for the API... [ 5.331083] platform 79000000.r5f: configured R5F for IPC-only mode [ 5.337896] platform 79000000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a1000000 [ 5.350878] remoteproc remoteproc1: 79000000.r5f is available [ 5.356851] remoteproc remoteproc1: attaching to 79000000.r5f [ 5.390478] platform 79000000.r5f: R5F core initialized in IPC-only mode [ 5.398036] rproc-virtio rproc-virtio.1.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a1000000 [ 5.409086] virtio_rpmsg_bus virtio1: rpmsg host is online [ 5.409632] virtio_rpmsg_bus virtio0: rpmsg host is online [ 5.409872] virtio_rpmsg_bus virtio1: creating channel ti.ipc4.ping-pong addr 0xd [ 5.409991] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xe [ 5.410363] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xd [ 5.436507] rproc-virtio rproc-virtio.1.auto: registered virtio1 (type 7) [ 5.445955] rproc-virtio rproc-virtio.0.auto: registered virtio0 (type 7) [ 5.448573] remoteproc remoteproc1: remote processor 79000000.r5f is now attached [ 5.455546] remoteproc remoteproc0: remote processor 7e000000.dsp is now attached [ OK ] Listening on dropbear.socket. [ 5.470869] k3-dsp-rproc 7e000000.dsp: register pm nitifiers in remoteproc mode [ OK ] Listening on PC/SC Smart Card Daemo[ 5.487509] random: crng init done n Activation Socket. [ 5.494997] k3-dsp-rproc 7e200000.dsp: assigned reserved memory node vision-apps-c71_1-dma-memory@b1000000 [ 5.507313] k3-dsp-rproc 7e200000.dsp: configured DSP for IPC-only mode [ 5.529513] remoteproc remoteproc2: 7e200000.dsp is available [ 5.535450] remoteproc remoteproc2: attaching to 7e200000.dsp [ 5.544865] k3-dsp-rproc 7e200000.dsp: DSP initialized in IPC-only mode Starting Weston socket... [ 5.552599] rproc-virtio rproc-virtio.2.auto: assigned reserved memory node vision-apps-c71_1-dma-memory@b1000000 [ 5.552821] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [ 5.578520] platform 78000000.r5f: configured R5F for IPC-only mode [ 5.585333] platform 78000000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a0000000 [ 5.597147] remoteproc remoteproc3: 78000000.r5f is available [ 5.609548] remoteproc remoteproc3: attaching to 78000000.r5f [ 5.617350] platform 78000000.r5f: R5F core initialized in IPC-only mode [ 5.624361] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a0000000 [ 5.635340] virtio_rpmsg_bus virtio3: rpmsg host is online Starting D-Bus System Message Bus...[ 5.635524] virtio_rpmsg_bus virtio3: creating channel ti.ipc4.ping-pong addr 0xd [ 5.641106] rproc-virtio rproc-virtio.3.auto: registered virtio3 (type 7) [ 5.659743] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0xe [ 5.660564] remoteproc remoteproc3: remote processor 78000000.r5f is now attached Starting Reboot and dump vmcore via kexec... [ 5.695380] virtio_rpmsg_bus virtio2: rpmsg host is online [ 5.696425] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0xd [ 5.701560] rproc-virtio rproc-virtio.2.auto: registered virtio2 (type 7) [ 5.713784] platform 78400000.r5f: configured R5F for IPC-only mode [ 5.717095] rtc-ti-k3 2b1f0000.rtc: registered as rtc0 [ 5.721626] platform 78400000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a2000000 [ 5.729867] rtc-ti-k3 2b1f0000.rtc: setting system clock to 1970-01-01T00:00:03 UTC (3) [ 5.736970] remoteproc remoteproc2: remote processor 7e200000.dsp is now attached [ 5.752095] k3-dsp-rproc 7e200000.dsp: register pm nitifiers in remoteproc mode [ 5.752645] remoteproc remoteproc4: 78400000.r5f is available [ 5.757715] e5010 fd20000.e5010: Device registered as /dev/video2 [ 5.772405] remoteproc remoteproc4: attaching to 78400000.r5f [ 5.779019] platform 78400000.r5f: R5F core initialized in IPC-only mode [ 5.787074] rproc-virtio rproc-virtio.5.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a2000000 [ 5.791072] PVR_K: 215: Device: fd80000.gpu [ 5.814032] j721e-pcie-host f102000.pcie: host bridge /pcie@f102000 ranges: [ 5.821153] j721e-pcie-host f102000.pcie: IO 0x0068001000..0x0068010fff -> 0x0068001000 [ 5.830461] j721e-pcie-host f102000.pcie: MEM 0x0068011000..0x006fffffff -> 0x0068011000 [ 5.839301] j721e-pcie-host f102000.pcie: IB MEM 0x0000000000..0xffffffffffff -> 0x0000000000 [ OK ] Finished Load/Save Random Seed. [ 5.857185] PVR_K: 215: Read BVNC 36.53.104.796 from HW device registers [ 5.864181] PVR_K: 215: RGX Device registered BVNC 36.53.104.796 with 1 core in the system [ OK ] Listening on Docker Socket for the [ 5.874323] [drm] Initialized pvr 23.3.6512818 20170530 for fd80000.gpu on minor 0 API. [ OK ] Listening on Weston socket. [ OK ] Finished Reboot and dump vmcore via kexec. [ OK ] Found device /dev/ttyS2. [ 5.943214] virtio_rpmsg_bus virtio4: rpmsg host is online [ 5.943632] virtio_rpmsg_bus virtio4: creating channel rpmsg_chrdev addr 0xd [ 5.959940] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0x15 [ 5.967524] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0x15 [ 5.975286] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xe [ 5.984386] rproc-virtio rproc-virtio.5.auto: registered virtio4 (type 7) [ 5.988179] virtio_rpmsg_bus virtio4: creating channel rpmsg_chrdev addr 0x15 [ 5.992394] remoteproc remoteproc4: remote processor 78400000.r5f is now attached [ 6.006419] virtio_rpmsg_bus virtio4: creating channel ti.ipc4.ping-pong addr 0xe [ 6.014182] virtio_rpmsg_bus virtio4: msg received with no recipient [ 6.024566] virtio_rpmsg_bus virtio0: msg received with no recipient [ 6.037776] virtio_rpmsg_bus virtio2: creating channel ti.ipc4.ping-pong addr 0xe [ 6.048431] mtdblock: MTD device 'ospi_nand.env.backup' is NAND, please consider using UBI block devices instead. [ 6.048830] mtdblock: MTD device 'ospi_nand.rootfs' is NAND, please consider using UBI block devices instead. [ OK ] Reached target Socket Units. [ 6.093841] mtdblock: MTD device 'ospi_nand.u-boot' is NAND, please consider using UBI block devices instead. [ 6.106909] mtdblock: MTD device 'ospi_nand.tiboot3' is NAND, please consider using UBI block devices instead. [ 6.115095] mtdblock: MTD device 'ospi_nand.tispl' is NAND, please consider using UBI block devices instead. [ 6.143264] virtio_rpmsg_bus virtio2: msg received with no recipient [ 6.164744] mtdblock: MTD device 'ospi_nand.phypattern' is NAND, please consider using UBI block devices instead. [ 6.176252] mtdblock: MTD device 'ospi_nand.env' is NAND, please consider using UBI block devices instead. [ OK ] Started D-Bus System Message Bus. [ OK ] Reached target Basic System. [ OK ] Started Job spooling tools. [ OK ] Started Periodic Command Scheduler. Starting DEMO... Starting Print notice about GPLv3 packages... Starting IPv6 Packet Filtering Framework... Starting IPv4 Packet Filtering Framework... [ OK ] Started irqbalance daemon. Starting Telephony service... Starting Expand the rootfs…ll size of the boot device.... [ OK ] Started strongSwan IPsec I…IKEv2 daemon using ipsec.conf. [ 6.533977] audit: type=1334 audit(1651167930.775:4): prog-id=7 op=LOAD [ 6.541207] mtdblock: MTD device 'ospi_nand.env.backup' is NAND, please consider using UBI block devices instead. [ 6.543226] audit: type=1334 audit(1651167930.783:5): prog-id=8 op=LOAD Starting User Login Management... [ OK ] Started TEE Supplicant. Starting Telnet Server... [ OK ] Started DEMO. [ OK ] Finished IPv6 Packet Filtering Framework. [ OK ] Finished IPv4 Packet Filtering Framework. [ OK ] Finished Telnet Server. [ OK ] Reached target Preparation for Network. Starting Network Configuration... [ OK ] Started Telephony service. [ 6.806137] mtdblock: MTD device 'ospi_nand.tiboot3' is NAND, please consider using UBI block devices instead. [ 6.873680] mtdblock: MTD device 'ospi_nand.rootfs' is NAND, please consider using UBI block devices instead. [ 6.917252] Bluetooth: Core ver 2.22 [ 6.920692] j721e-pcie-host f102000.pcie: PCI host bridge to bus 0000:00 [ 6.923111] NET: Registered PF_BLUETOOTH protocol family [ 6.935514] Bluetooth: HCI device and connection manager initialized [ 6.943580] Bluetooth: HCI socket layer initialized [ 6.948588] Bluetooth: L2CAP socket layer initialized [ 6.952855] mtdblock: MTD device 'ospi_nand.phypattern' is NAND, please consider using UBI block devices instead. [ 6.955351] Bluetooth: SCO socket layer initialized [ 7.001809] pci_bus 0000:00: root bus resource [bus 00-ff] [ 7.018841] mtdblock: MTD device 'ospi_nand.env.backup' is NAND, please consider using UBI block devices instead. [ 7.022330] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x68001000-0x68010fff]) [ 7.056251] pci_bus 0000:00: root bus resource [mem 0x68011000-0x6fffffff] [ 7.063502] pci 0000:00:00.0: [104c:b010] type 01 class 0x060400 [ 7.070128] pci 0000:00:00.0: supports D1 [ 7.097595] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 7.200651] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 7.209620] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 7.216627] pci 0000:00:00.0: PCI bridge to [bus 01] [ 7.234841] pcieport 0000:00:00.0: PME: Signaling with IRQ 472 [ OK ] Finished Expand the rootfs…full size of the boot device.. [ 7.344739] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.381869] pcieport 0000:00:00.0: AER: enabled with IRQ 472 [ 7.393212] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.400673] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ OK ] Started User Login Management. [ 7.559560] mtdblock: MTD device 'ospi_nand.u-boot' is NAND, please consider using UBI block devices instead. [ OK ] Started Network Configuration. [ 7.579349] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:00] driver [TI DP83867] (irq=POLL) [ 7.588717] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rgmii-rxid link mode [ 7.635314] mtdblock: MTD device 'ospi_nand.tiboot3' is NAND, please consider using UBI block devices instead. Starting Network Name Resolution... [ 7.692115] mtdblock: MTD device 'ospi_nand.rootfs' is NAND, please consider using UBI block devices instead. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. [ 7.728595] mtdblock: MTD device 'ospi_nand.env' is NAND, please consider using UBI block devices instead. [ 7.817539] mtdblock: MTD device 'ospi_nand.tispl' is NAND, please consider using UBI block devices instead. [ OK ] Reached target Hardware activated USB gadget. [ 7.866265] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller [ 7.872698] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 1 [ 7.881462] xhci-hcd xhci-hcd.6.auto: hcc params 0x200073c9 hci version 0x100 quirks 0x0000002000018010 [ 7.891299] xhci-hcd xhci-hcd.6.auto: irq 474, io mem 0x31210000 [ 7.898302] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller [ 7.904176] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 2 [ 7.912297] xhci-hcd xhci-hcd.6.auto: Host supports USB 3.0 SuperSpeed [ 7.921053] hub 1-0:1.0: USB hub found [ 7.925176] hub 1-0:1.0: 1 port detected [ 7.931407] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 7.940870] hub 2-0:1.0: USB hub found [ 7.945160] hub 2-0:1.0: 1 port detected [ OK ] Started Network Name Resolution. [ OK ] Reached target Network. [ OK ] Reached target Host and Network Name Lookups. Starting Avahi mDNS/DNS-SD Stack... Starting Enable and configure wl18xx bluetooth stack... Starting containerd container runtime... [ 8.191572] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ OK ] Started Netperf Benchmark Server. [ OK ] Started NFS status monitor for NFSv2/3 locking.. Starting Simple Network Ma…ent Protocol (SNMP) Daemon.... Starting Permit User Sessions... [ OK ] Finished Enable and configure wl18xx bluetooth stack. [ OK ] Finished Permit User Sessions. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS2. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... [ 8.345323] hub 1-1:1.0: USB hub found [ 8.349278] hub 1-1:1.0: 4 ports detected Starting Weston, a Wayland…ositor, as a system service... [ OK ] Created slice Slice /system/systemd-fsck. [ 8.471578] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 8.496865] hub 2-1:1.0: USB hub found [ 8.500827] hub 2-1:1.0: 4 ports detected [ 8.531055] audit: type=1334 audit(1651167932.771:6): prog-id=9 op=LOAD [ 8.540078] audit: type=1334 audit(1651167932.779:7): prog-id=10 op=LOAD Starting User Database Manager... [ OK ] Found device /dev/mmcblk0p1. Starting File System Check on /dev/mmcblk0p1... [ 8.646152] mtdblock: MTD device 'ospi_nand.env' is NAND, please consider using UBI block devices instead. [ 8.675739] mtdblock: MTD device 'ospi_nand.tispl' is NAND, please consider using UBI block devices instead. [ OK ] Finished File System Check on /dev/mmcblk0p1. Mounting /run/media/mmcblk0p1... [FAILED] Failed to start Synchronize System and HW clocks. See 'systemctl status sync-clocks.service' for details. [ OK ] Mounted /run/media/mmcblk0p1. [ OK ] Started User Database Manager. [ OK ] Created slice User Slice of UID 1000. Starting User Runtime Directory /run/user/1000... [ OK ] Finished User Runtime Directory /run/user/1000. Starting User Manager for UID 1000... [ 9.064392] audit: type=1006 audit(1651167933.307:8): pid=693 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1 [ 9.077059] audit: type=1300 audit(1651167933.307:8): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffedf74188 a2=4 a3=ffff8c0fd020 items=0 ppid=1 pid=693 auid=1000 uid=0 gid=0 euid=0 suid=0 f) [ 9.103606] audit: type=1327 audit(1651167933.307:8): proctitle="(systemd)" [ OK ] Started Simple Network Man…ement Protocol (SNMP) Daemon.. [ OK ] Found device /dev/mmcblk1p1. Starting File System Check on /dev/mmcblk1p1... [ OK ] Finished File System Check on /dev/mmcblk1p1. Mounting /run/media/boot-mmcblk1p1... [ OK ] Started User Manager for UID 1000. [ OK ] Started Session c1 of User weston. [ OK ] Mounted /run/media/boot-mmcblk1p1. [ 9.815841] audit: type=1006 audit(1651167934.059:9): pid=638 uid=0 old-auid=4294967295 auid=1000 tty=tty7 old-ses=4294967295 ses=2 res=1 [ 9.828362] audit: type=1300 audit(1651167934.059:9): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffedf74188 a2=4 a3=ffff8c0fd020 items=0 ppid=1 pid=638 auid=1000 uid=0 gid=0 euid=0 suid=0 f) [ 9.855617] audit: type=1327 audit(1651167934.059:9): proctitle="(weston)" [FAILED] Failed to start Weston, a …mpositor, as a system service. See 'systemctl status weston.service' for details. [ OK ] Started containerd container runtime. *************************************************************** *************************************************************** NOTICE: This file system contains the following GPL-3.0 packages: adwaita-icon-theme-symbolic autoconf bash-dev bash bc binutils cifs-utils coreutils-stdbuf coreutils cpio cpp-symlinks cpp dosfstools elfutils g++-symlinks g++ gawk gcc-symlinks gcc gdb gdbserver gettext glmark2 gnu-config grub-common grub-editenv grub-efi gzip hidapi less libasm1 libatomic-dev libatomic1 libbfd libdebuginfod1 libdw1 libeigen-dev libelf1 libgcc-s-dev libgcc1 libgdbm-compat4 libgdbm-dev libgdbm6 libgettextlib libgettextsrc libgmp10 libidn2-0 libmpc3 libmpfr6 libopcodes libqt5charts-examples libqt5charts-plugins libqt5charts-qmlplugins libqt5charts5 libqt5sensors-plugins libqt5sensors-qmlplugins libqt5sensors5 libqt5serialport-examples libqt5serialport-plugins libqt5serialport-qmlplugins libqt5serialport5 libqt5svg-examples libqt5svg-plugins libqt5svg-qmlplugins libqt5svg5 libqt5virtualkeyboard-plugins libqt5virtualkeyboard-qmlplugins libqt5virtualkeyboard5 libqt5webchannel-plugins libqt5webchannel-qmlplugins libqt5webchannel5 libreadline-dev libreadline8 libstdc++-dev libstdc++6 libunistring2 m4-dev m4 make nettle parted piglit qt3d-plugins qt3d-qmlplugins qt3d qtbase-examples qtbase-plugins qtbase-qmlplugins qtbase qtconnectivity-plugins qtconnectivity-qmlplugins qtconnectivity qtdeclarative-plugins qtdeclarative-qmlplugins qtdeclarative-tools qtdeclarative qtgraphicaleffects-qmlplugins qtlocation-examples qtlocation-plugins qtlocation-qmlplugins qtlocation qtmultimedia-examples qtmultimedia-plugins qtmultimedia-qmlplugins qtmultimedia qtquics-qmlplugins.control qtquics2-plugins.control qtquics2-qmlplugins.control qtquics2.control qtscript-examples qtscript-plugins qtscript-qmlplugins qtscript qtwayland-examples qtwayland-plugins qtwayland-qmlplugins qtwayland tar which If you do not wish to distribute GPL-3.0 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Finished Print notice about GPLv3 packages. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Record Runlevel Change in UTMP... [ OK ] Finished Record Runlevel Change in UTMP. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project j722s-evm - Arago 2023.10 j722s-evm - j722s-evm login: j722s-evm login: j722s-evm login: root [ 13.955975] audit: type=1006 audit(1651167938.199:10): pid=1106 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1 [ 13.969161] audit: type=1300 audit(1651167938.199:10): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=ffffedf74188 a2=1 a3=ffff8c0fd020 items=0 ppid=1 pid=1106 auid=0 uid=0 gid=0 euid=0 suid=0 fs) [ 13.995634] audit: type=1327 audit(1651167938.199:10): proctitle="(systemd)" [ 14.002752] audit: type=1334 audit(1651167938.219:11): prog-id=11 op=LOAD [ 14.009649] audit: type=1300 audit(1651167938.219:11): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=fffff7c09d30 a2=78 a3=0 items=0 ppid=1 pid=1106 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egi) [ 14.035181] audit: type=1327 audit(1651167938.219:11): proctitle="(systemd)" [ 14.042298] audit: type=1334 audit(1651167938.239:12): prog-id=11 op=UNLOAD [ 14.049314] audit: type=1334 audit(1651167938.239:13): prog-id=12 op=LOAD [ 14.056151] audit: type=1300 audit(1651167938.239:13): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=fffff7c09dd0 a2=78 a3=0 items=0 ppid=1 pid=1106 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egi) [ 14.081618] audit: type=1327 audit(1651167938.239:13): proctitle="(systemd)" root@j722s-evm:~# root@j722s-evm:~# root@j722s-evm:~# root@j722s-evm:~# flash_erase /dev/mtd0 0 0 Erasing 512 Kibyte @ 0 -- 100 % complete root@j722s-evm:~# root@j722s-evm:~# root@j722s-evm:~# vi ospi.txt root@j722s-evm:~# root@j722s-evm:~# root@j722s-evm:~# root@j722s-evm:~# hexdump ospi.txt 0000000 6261 6463 000a 0000005 root@j722s-evm:~# root@j722s-evm:~# root@j722s-evm:~# nandwrite -p /dev/mtd0 ospi.txt Writing data to block 0 at offset 0x0 root@j722s-evm:~# root@j722s-evm:~# nanddump /dev/mtd0 -f ospi_read.txt ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 262144, page size 4096, OOB size 128 Dumping data starting at 0x00000000 and ending at 0x00080000... root@j722s-evm:~# hexdump ospi_read.txt 0000000 6261 6463 ff0a ffff ffff ffff ffff ffff 0000010 ffff ffff ffff ffff ffff ffff ffff ffff * 0080000 root@j722s-evm:~# root@j722s-evm:~# root@j722s-evm:~# root@j722s-evm:~# flaschp -v ospi.txt /dev/mtd0 -sh: flaschp: command not found root@j722s-evm:~# root@j722s-evm:~# flashcp -v ospi.txt /dev/mtd0 Erasing blocks: 1/1 (100%) Writing data: 0k/0k (100%) Verifying data: 0k/0k (100%) root@j722s-evm:~# root@j722s-evm:~# flashcp -v ospi.txt /dev/mtd1 Erasing blocks: 1/1 (100%) Writing data: 0k/0k (100%) Verifying data: 0k/0k (100%) root@j722s-evm:~# root@j722s-evm:~# flashcp -v ospi.txt /dev/mtd2 Erasing blocks: 1/1 (100%) Writing data: 0k/0k (100%) Verifying data: 0k/0k (100%) root@j722s-evm:~# root@j722s-evm:~# flashcp -v ospi.txt /dev/mtd3 Erasing blocks: 1/1 (100%) Writing data: 0k/0k (100%) Verifying data: 0k/0k (100%) root@j722s-evm:~# root@j722s-evm:~# flashcp -v ospi.txt /dev/mtd4 Erasing blocks: 1/1 (100%) Writing data: 0k/0k (100%) Verifying data: 0k/0k (100%) root@j722s-evm:~# root@j722s-evm:~# flashcp -v ospi.txt /dev/mtd5 Erasing blocks: 1/1 (100%) Writing data: 0k/0k (100%) Verifying data: 0k/0k (100%) root@j722s-evm:~# root@j722s-evm:~# flashcp -v ospi.txt /dev/mtd6 Erasing blocks: 1/1 (100%) Writing data: 0k/0k (100%) Verifying data: 0k/0k (100%) root@j722s-evm:~# root@j722s-evm:~# root@j722s-evm:~#