NOTICE: BL31: v2.7(release):v2.7.0-359-g1309c6c805-dirty NOTICE: BL31: Built : 02:45:48, Nov 26 2022 I/TC: I/TC: OP-TEE version: 3.19.0-15-gd6c5d0037 (gcc version 9.2.1 20191025 (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10))) #1 Tue Nov 29 15:23:51 UTC 2022 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: SYSFW ABI: 3.1 (firmware rev 0x0008 '8.5.2--v08.05.02 (Chill Capybar') I/TC: HUK Initialized I/TC: Activated SA2UL device I/TC: Enabled firewalls for SA2UL TRNG device I/TC: SA2UL TRNG initialized I/TC: SA2UL Drivers initialized I/TC: Primary CPU switching to normal world boot [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] [ 0.000000] VER202407190A [ 0.000000] Linux version 5.10.153-g90c3a58fd2 (root@p6754-ub18) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #2 SMP PREEMPT Wed Aug 6 11:23:30 CST 2025 [ 0.000000] Machine model: Texas Instruments J721S2 EVM [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002880000 (options '') [ 0.000000] printk: bootconsole [ns16550a0] enabled I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot [ 0.066737] k3-ringacc 2b800000.ringacc: Failed to get MSI domain [ 0.073044] k3-ringacc 3c000000.ringacc: Failed to get MSI domain [ 0.108095] k3-ringacc 2b800000.ringacc: Failed to get MSI domain [ 0.114413] k3-ringacc 3c000000.ringacc: Failed to get MSI domain [ 0.141716] omap8250 40a00000.serial: failed to get alias [ 0.263995] spi-nor spi7.0: unrecognized JEDEC id bytes: e0 00 00 00 00 00 [ 0.272104] debugfs: Directory 'pd:39' with parent 'pm_genpd' already present! [ 0.279413] debugfs: Directory 'pd:38' with parent 'pm_genpd' already present! [ 0.286892] debugfs: Directory 'pd:276' with parent 'pm_genpd' already present! [ 0.294662] debugfs: Directory 'pd:154' with parent 'pm_genpd' already present! INIT: version 2.96 booting INIT: /etc/inittab[53]: duplicate ID field "1" INIT: Entering runlevel: 3 00disable_protect:0 00disable_protect:0 '/var/log' -> '/mnt/emmc-other/log/sd_log' [ 0.848157] =======PVR=======tangjun========RGXRegisterDevice======== [ 0.891555] k3-dsp-rproc 64800000.dsp: configured DSP for IPC-only mode [ 0.898494] k3-dsp-rproc 64800000.dsp: DSP initialized in IPC-only mode [ 0.907586] k3-dsp-rproc 65800000.dsp: configured DSP for IPC-only mode [ 0.914830] k3-dsp-rproc 65800000.dsp: DSP initialized in IPC-only mode [ 0.929472] k3_r5_rproc bus@100000:bus@28380000:r5fss@41000000: MCU cluster requires both R5F cores to be enabled but num_cores is set to = 1 [ 0.943656] platform 5c00000.r5f: configured R5F for IPC-only mode [ 0.952223] platform 5c00000.r5f: R5F core initialized in IPC-only mode [ 0.960030] platform 5d00000.r5f: configured R5F for IPC-only mode [ 0.967943] platform 5d00000.r5f: R5F core initialized in IPC-only mode [ 0.977389] platform 5e00000.r5f: configured R5F for remoteproc mode [ 0.984949] platform 5f00000.r5f: configured R5F for remoteproc mode [ 0.994118] remoteproc remoteproc4: request_firmware failed: -2 [ 1.000151] remoteproc remoteproc5: request_firmware failed: -2 starting rsyslogd ... done [ReadCalibDataFromFlash.sh] start: flag addr=0xa7280da8 bin=/dev/calib_data.bin head_lenth:4 flash_add_offset:540016640 devName:/dev/mmcblk0p1 [ReadCalibDataFromFlash.sh] Read_2k_Blocks:2k 2048+0 records in 2048+0 records out [ReadCalibDataFromFlash.sh] 0.2 read file Done use dir '/mnt/emmc-other/log/canlog//' to be file pool. _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio2.rpmsg_chrdev.-1.50 _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio0.rpmsg_chrdev.-1.50 _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio1.rpmsg_chrdev.-1.50 2048+0 records in 2048+0 records out [ReadCalibDataFromFlash.sh] 0.3 read fileNameCompare Done [ReadCalibDataFromFlash.sh] 0.4 verify OK powerMonitorInit powerMonitor cmd address0x9802619d _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio3.rpmsg_chrdev.-1.13 _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio3.rpmsg_chrdev.-1.21 [ 1.724695] am65-cpsw-nuss c200000.ethernet: Use random MAC address _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio3.rpmsg_chrdev.-1.13 _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio3.rpmsg_chrdev.-1.21 [ 1.851801] =======PVR=======tangjun========RGXPrePowerState======== Starting OpenBSD Secure Shell server: sshd done. read tty send open ttyS2 success run main process run RecordLogToEmmcThread Used config file: /opt/vision_apps/monitor_app.json /etc/rc3.d/S01tte.sh: line 165: /opt/vision_apps/vx_app_upload_controller.out: No such file or directory [ 2.338636] am65-cpsw-nuss c200000.ethernet: get: wrong ale fld id 2 [ 2.345398] am65-cpsw-nuss c200000.ethernet: get: wrong ale fld id 1 [ 2.366036] am65-cpsw-nuss c200000.ethernet: get: wrong ale fld id 2 [ 2.372724] am65-cpsw-nuss c200000.ethernet: get: wrong ale fld id 1 [ 2.393916] am65-cpsw-nuss c200000.ethernet: get: wrong ale fld id 2 [ 2.400630] am65-cpsw-nuss c200000.ethernet: get: wrong ale fld id 1 [ 2.422099] am65-cpsw-nuss c200000.ethernet: get: wrong ale fld id 2 [ 2.428763] am65-cpsw-nuss c200000.ethernet: get: wrong ale fld id 1 [ 2.455450] am65-cpsw-nuss c200000.ethernet: get: wrong ale fld id 2 [ 2.463015] am65-cpsw-nuss c200000.ethernet: get: wrong ale fld id 1 1970-01-01_08:00:02.544: upgrade init ok version:20250418 build time:Sep 25 2025 09:50:41 1970-01-01_08:00:02.544: active flag info:0x72 0xbf 0xa3 0xe8 0xb5 0xb5 0xb5 0xb5 0xa5 0xa5 1970-01-01_08:00:02.545: mcu update flag info:0x01 0x00 0x02 0x00 0x01 0x01 1970-01-01_08:00:02.545: cal update flag info:0x01 0x00 0x02 0x00 0x01 0x01 1970-01-01_08:00:02.545: soc update flag info:0x01 0x00 0x00 0x00 0x01 0x00 1970-01-01_08:00:02.545: get update active info ok 1970-01-01_08:00:02.545: soc is running in slot a 1970-01-01_08:00:02.545: app is running in slot b 1970-01-01_08:00:02.545: cal is running in slot b BTF debug data section '.BTF' rejected: Invalid argument (22)! - Length: 2363 Verifier analysis: magic: 0xeb9f version: 1 flags: 0x0 hdr_len: 24 type_off: 0 type_len: 268 str_off: 268 str_len: 2071 btf_total_size: 2363 [1] PTR (anon) type_id=2 [2] STRUCT xdp_md size=24 vlen=6 data type_id=3 bits_offset=0 data_end type_id=3 bits_offset=32 data_meta type_id=3 bits_offset=64 ingress_ifindex type_id=3 bits_offset=96 rx_queue_index type_id=3 bits_offset=128 egress_ifindex type_id=3 bits_offset=160 [3] TYPEDEF __u32 type_id=4 [4] INT unsigned int size=4 bits_offset=0 nr_bits=32 encoding=(none) [5] FUNC_PROTO (anon) return=6 args=(1 ctx) [6] INT int size=4 bits_offset=0 nr_bits=32 encoding=SIGNED [7] FUNC tte_xdp_filter type_id=5 [8] INT char size=1 bits_offset=0 nr_bits=8 encoding=SIGNED [9] ARRAY (anon) type_id=8 index_type_id=10 nr_elems=4 [10] INT __ARRAY_SIZE_TYPE__ size=4 bits_offset=0 nr_bits=32 encoding=(none) [11] VAR __license type_id=9 linkage=1 [12] DATASEC license size=0 vlen=1 size == 0 net diagnose build:Sep 17 2025 17:06:16 version:20250506V1.5 1970-01-01_08:00:02.701: soc is running slot a 1970-01-01_08:00:02.702: page_size:0x00001000 map_psramaddr:0x40280040 1970-01-01_08:00:02.709: doip/fota start tda4vl version 20250704V3.1 build:Sep 25 2025 09:50:12 1970-01-01_08:00:02.709: UpdateFlg value:0 UpdateFlg addr:0x98006098 1970-01-01_08:00:03.724: UpdateFlg value:0 UpdateFlg addr:0x98006098 1970-01-01_08:00:04.732: UpdateFlg value:0 UpdateFlg addr:0x98006098 ==================== ===tte map engine=== ==================== ========================================= ============TTE_MAP_ENGINE=============== ======LOAD SOMEIP CONFIG PARAMETERS====== ==============BEGIN...=================== [VERSION] SYSTEM_VERSION: v0.1.28 [MAP] SAVED_MAP_SEGMENT_FILE_NAME: /mnt/emmc-other/engine_map_segment.bin [INSTANCE_ID] MAP_ENGINE_SERVICE_INSTANCE_ID: 0x534d MAP_ENGINE_SERVICE_INSTANCE_ID_2: 0x5445 MAP_ENGINE_GET_SERVICE_INSTANCE_ID: 0x534d MAP_ENGINE_GET_SERVICE_INSTANCE_ID_2: 0x5445 [MAJOR_ID] OD_SOMEIP3_MAJOR_VERSION: 0x4 CAR2D3D_SOMEIP3_MAJOR_VERSION: 0x4 CAR_POSE_SOMEIP3_MAJOR_VERSION: 0x4 PILLAR_SOMEIP3_MAJOR_VERSION: 0x4 SLOT_SPEEDBUMP_SOMEIP3_MAJOR_VERSION: 0x1 BEVFSDCURB_SOMEIP3_MAJOR_VERSION: 0x52 LANELINE_SOMEIP3_MAJOR_VERSION: 0x1 VRSLOT_REFERC_LINE_SOMEIP3_MAJOR_VERSION: 0x4 APUMAP_SOMEIP3_MAJOR_VERSION: 0x2 MODULE_TIME_COST_SOMEIP3_MAJOR_VERSION: 0x1 CHASSIS_SOMEIP3_MAJOR_VERSION: 0x0 [GROUP_ID] MAP_ENGINE_EVENTGROUP_ID: 0x534d MAP_ENGINE_EVENTGROUP_ID_2: 0x1 [METHOD_ID] MAP_ENGINE_GET_METHOD_ID: 0x8001 [EVENT_ID] MAP_ENGINE_EVENT_ID: 0x8001 [SERVICE_ID] SERVICE_ID_OD_DATA_INFO: 0x7543 SERVICE_ID_CAR2D3D_DATA_INFO: 0x7544 SERVICE_ID_CAR_POSE_DATA_INFO: 0x7545 SERVICE_ID_PILLAR_INFO: 0x7550 SERVICE_ID_SLOT_SPEEDBUMP_INFO: 0x7630 SERVICE_ID_BEVFSDCURB_INFO: 0x7631 SERVICE_ID_LANELINE_INFO: 0x7636 SERVICE_ID_VRSLOT_REFERC_LINE_INFO: 0x7839 SERVICE_ID_APUMAP_INFO: 0x6101 SERVICE_ID_MODULE_TIME_COST_INFO: 0x7830 SERVICE_ID_CHASSIS_INFO: 0x1002 [DEBUG_SETTING] FSDCURB_INPUT_INFO_DEBUG_SETTING: 0 SAVED_LOAD_MAP_INFO_DEBUG_SETTING: 0 ONLY_USE_CURRENT_FSD_DATA_DEBUG_SETTING: 0 ======LOAD SOMEIP CONFIG PARAMETERS====== ==============END...===================== ========================================= _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project tte /dev/ttyS2 Arago 2021.09 tte /dev/ttyS2 tte login: 1970-01-01_08:00:05.746: UpdateFlg value:0 UpdateFlg addr:0x98006098 1970-01-01_08:00:06.756: UpdateFlg value:0 UpdateFlg addr:0x98006098 1970-01-01_08:00:07.769: kms root valid time:2020-05-07_16:00:00 ~ 2120-04-14_15:59:59 1970-01-01_08:00:07.770: DoIp Sync Can Time: Invalid time parameter(0-0-0 0:0:0) 1970-01-01_08:00:07.770: soc current time:1970-01-01_00:00:07(7) soc release time:2025-08-06_16:00:00(1754496000) 1970-01-01_08:00:07.770: time from file:1754467200(2025-08-06 16:00:00) 1970-01-01_08:00:07.770: GetTimeFromFile OK! 1970-01-01_08:00:07.770: vin(hex):ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 1970-01-01_08:00:07.770: part number(hex):33 37 37 36 32 30 30 58 4b 56 33 4a 41 1970-01-01_08:00:07.770: serial number(hex):30 33 35 45 32 32 30 32 34 31 32 31 36 32 30 30 30 31 1970-01-01_08:00:07.770: cal version:FFFFFFFFFFFFFFF 1970-01-01_08:00:07.770: app version:FFFFFFFFFFFFFFF 1970-01-01_08:00:07.770: soc internel version:22239P00AVB31_250807 1970-01-01_08:00:07.770: soc externel version:S090B04XKM19006 ( 289) PVR:(Error): FirmwareSync PVRSRVFenceWait failed. [ :588 ] ( 289) PVR:(Error): FirmwareSync PVRSRVFenceWait failed. [ :588 [ 14.303104] =======PVR=======tangjun========RGXForcedIdleRequest======== ] [ 15.239219] =======PVR=======tangjun========RGXPrePowerState======== [ 16.245800] PVR_K:(Error): 59: RGXPollForGPCommandCompletion: Failed! Error(PVRSRV_ERROR_TIMEOUT) CPU linear address(000000005263e2be) Expected value(1) [4762] [ 16.260623] PVR_K:(Error): 59: PVRSRVSetDeviceSystemPowerState: Transition from 1 to 0 FAILED (PVRSRV_ERROR_TIMEOUT) at stage 1. Dumping debug info. [613] [ 16.275776] ------[ Native Fence Sync: timelines ]------ [ 16.281121] foreign_sync: @0 ctx=1 refs=1 [ 16.285254] sw: RM_SWTimeline-vx_app_multi_cam_ @0 cur=0 [ 16.290600] rogue-ta3d: @0 ctx=3 refs=1 [ 16.294437] rogue-tq3d: @0 ctx=5 refs=1 [ 16.298376] QE-_tte.out-vx_app_multi_ca-244: @5 ctx=6 refs=4 [ 16.304033] @2: (+-) refs=2 fwaddr=0xd0083011 enqueue=1 status=Active 2-TQM [ 16.311325] @3: (+-) refs=2 fwaddr=0xd0083019 enqueue=1 status=Active 3-TQM [ 16.318616] @4: (+-) refs=2 fwaddr=0xd0083021 enqueue=1 status=Active 4-TQM [ 16.327099] PVR_K:(Error): 59: RGXCheckFirmwareCCB: Failed firmware restart (PVRSRV_ERROR_TIMEOUT) [4627] ( 289) PVR:(Error): FirmwareSync PVRSRVFenceWait failed. [ :588 ] [ 21.212238] PVR_K:(Error): 192: DevicesWatchdogThread: Device status not OK!!! [500] [ 21.221942] ------[ Native Fence Sync: timelines ]------ [ 21.227484] foreign_sync: @0 ctx=1 refs=1 [ 21.231758] sw: RM_SWTimeline-vx_app_multi_cam_ @0 cur=0 [ 21.237386] rogue-ta3d: @0 ctx=3 refs=1 [ 21.241623] rogue-tq3d: @0 ctx=5 refs=1 [ 21.245667] QE-_tte.out-vx_app_multi_ca-244: @6 ctx=6 refs=5 [ 21.251320] @2: (+-) refs=2 fwaddr=0xd0083011 enqueue=1 status=Active 2-TQM [ 21.258613] @3: (+-) refs=2 fwaddr=0xd0083019 enqueue=1 status=Active 3-TQM [ 21.265903] @4: (+-) refs=2 fwaddr=0xd0083021 enqueue=1 status=Active 4-TQM [ 21.273192] @5: (+-) refs=2 fwaddr=0xd0083029 enqueue=1 status=Active 5-TQM ( 289) PVR:(Error): FirmwareSync PVRSRVFenceWait failed. [ :588 ] ( 289) PVR:(Error): FirmwareSync PVRSRVFenceWait failed. [ :588 ] ( 289) PVR:(Error): FirmwareSync PVRSRVFenceWait failed. [ :588 ] _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project tte /dev/ttyS2 Arago 2021.09 tte /dev/ttyS2 tte login: root Password: ( 289) PVR:(Error): FirmwareSync PVRSRVFenceWait failed. [ :588 ] Last login: Thu Jan 1 00:00:30 UTC 1970 on ttyS2 root@tte:~# ( 289) PVR:(Error): FirmwareSync PVRSRVFenceWait failed. [ :588 ] root@tte:~# root@tte:~# root@tte:~# dmesg | grep -i pvr( 289) PVR:(Error): FirmwareSync PVRSRVFenceWait failed. [ :588 ] [ 0.840403] pvrsrvkm: loading out-of-tree module taints kernel. [ 0.848157] =======PVR=======tangjun========RGXRegisterDevice======== [ 0.854962] PVR_K: 189: Read BVNC 36.53.104.796 from HW device registers [ 0.854973] PVR_K: 189: RGX Device registered BVNC 36.53.104.796 with 1 core in the system [ 0.855347] [drm] Initialized pvr 1.15.6133109 20170530 for 4e20000000.gpu on minor 0 [ 1.828937] PVR_K: 289: RGX Firmware image 'rgx.fw.36.53.104.796' loaded [ 1.851390] PVR_K: 289: Shader binary image 'rgx.sh.36.53.104.796' loaded [ 1.851801] =======PVR=======tangjun========RGXPrePowerState======== [ 14.303104] =======PVR=======tangjun========RGXForcedIdleRequest======== [ 15.239219] =======PVR=======tangjun========RGXPrePowerState======== [ 16.245800] PVR_K:(Error): 59: RGXPollForGPCommandCompletion: Failed! Error(PVRSRV_ERROR_TIMEOUT) CPU linear address(000000005263e2be) Expected value(1) [4762] [ 16.260623] PVR_K:(Error): 59: PVRSRVSetDeviceSystemPowerState: Transition from 1 to 0 FAILED (PVRSRV_ERROR_TIMEOUT) at stage 1. Dumping debug info. [613] [ 16.274961] PVR_K: 59: ------------[ PVR DBG: START (High) ]------------ [ 16.274972] PVR_K: 59: OS kernel info: Linux 5.10.153-g90c3a58fd2 #2 SMP PREEMPT Wed Aug 6 11:23:30 CST 2025 aarch64 [ 16.274975] PVR_K: 59: DDK info: Rogue_DDK_Linux_WS rogueddk 1.15@6133109 (release) j721s2_linux [ 16.274979] PVR_K: 59: Time now: 16274976us [ 16.274981] PVR_K: 59: Services State: OK [ 16.274984] PVR_K: 59: Server Errors: 2 [ 16.274993] PVR_K: 59: Connections Device ID:0(128) P244-V244-T289-vx_app_multi_ca [ 16.274996] PVR_K: 59: ------[ Driver Info ]------ [ 16.274999] PVR_K: 59: Comparison of UM/KM components: MATCHING [ 16.275001] PVR_K: 59: KM Arch: 64 Bit [ 16.275004] PVR_K: 59: UM Connected Clients: 64 Bit [ 16.275008] PVR_K: 59: UM info: 1.15 @ 6133109 (release) build options: 0x80000810 [ 16.275011] PVR_K: 59: KM info: 1.15 @ 6133109 (release) build options: 0x00000810 [ 16.275014] PVR_K: 59: Window system: wayland [ 16.275022] PVR_K: 59: ------[ RGX Device ID:0 Start ]------ [ 16.275024] PVR_K: 59: ------[ RGX Info ]------ [ 16.275029] PVR_K: 59: Device Node (Info): 0000000078c52582 (00000000532a8ce9) [ 16.275033] PVR_K: 59: RGX BVNC: 36.53.104.796 (rogue) [ 16.275036] PVR_K: 59: RGX Device State: Active [ 16.275040] PVR_K: 59: RGX Power State: ON [ 16.275043] PVR_K: 59: FW info: 1.15 @ 6133109 (release) build options: 0x80000810 [ 16.275050] PVR_K: 59: BIF0 - OK [ 16.275054] PVR_K: 59: BIF1 - OK [ 16.275058] PVR_K: 59: FWCORE - OK [ 16.275065] PVR_K: 59: RGX FW State: FAULT - Restarting (HWRState 0x000000c1: HWR OK; FW fault; Restarting;) [ 16.275071] PVR_K: 59: RGX FW Power State: RGXFWIF_POW_FORCED_IDLE (APM disabled: 0 ok, 0 denied, 0 non-idle, 0 retry, 0 other, 0 total. Latency: 100 ms) [ 16.275077] PVR_K: 59: RGX DVFS: 0 frequency changes. Current frequency: 799.999 MHz (sampled at 13353604770 ns). FW frequency: 800.000 MHz. [ 16.275083] PVR_K: 59: RGX FW OS 0 - State: active; Freelists: Ok; Priority: 0; MTS on; [ 16.275088] PVR_K: 59: FW Fault 1: "Unknown KCCB command" (firmware/rgxfw_kernel_ccb.c:1156) [ 16.275091] PVR_K: 59: Data = 0x600234c8, CRTimer = 0x00000281954e, OSTimer = 14.302780450 [ 16.275096] PVR_K: 59: RGX Kernel CCB WO:0x18 RO:0x17 [ 16.275098] PVR_K: 59: RGX Firmware CCB WO:0x1 RO:0x0 [ 16.275101] PVR_K: 59: RGX Kernel CCB commands executed = 24 [ 16.275103] PVR_K: 59: RGX SLR: Forced UFO updates requested = 0 [ 16.275106] PVR_K: 59: RGX Errors: WGP:0, TRP:0 [ 16.275110] PVR_K: 59: Thread0: FW IRQ count = 22 [ 16.275112] PVR_K: 59: Last sampled IRQ count in LISR = 22 [ 16.275117] PVR_K: 59: FW System config flags = 0x00020000 (Ctx switch options: Medium CSW profile; VDM CS INDEX mode;) [ 16.275121] PVR_K: 59: FW OS config flags = 0x0000000F (Ctx switch: TDM; TA; 3D; CDM;) [ 16.275124] PVR_K: 59: ------[ RGX registers ]------ [ 16.275127] PVR_K: 59: RGX Register Base Address (Linear): 0x00000000d337864c [ 16.275129] PVR_K: 59: RGX Register Base Address (Physical): 0x4E20000000 [ 16.275133] PVR_K: 59: CORE_ID : 0x0000000008470000 [ 16.275137] PVR_K: 59: CORE_REVISION : 0x0068031C [ 16.275141] PVR_K: 59: DESIGNER_REV_FIELD1 : 0x00000000 [ 16.275144] PVR_K: 59: DESIGNER_REV_FIELD2 : 0x00000000 [ 16.275147] PVR_K: 59: CHANGESET_NUMBER : 0x0000000000000000 [ 16.275150] PVR_K: 59: MULTICORE_SYSTEM : 0x00000001 [ 16.275153] PVR_K: 59: MULTICORE_GPU : 0x00000078 [ 16.275156] PVR_K: 59: CLK_CTRL : 0x002aaa002a22aaaa [ 16.275159] PVR_K: 59: CLK_STATUS : 0x0000000000600000 [ 16.275163] PVR_K: 59: CLK_CTRL2 : 0x0000000000000000 [ 16.275166] PVR_K: 59: CLK_STATUS2 : 0x0000000000000000 [ 16.275170] PVR_K: 59: EVENT_STATUS : 0x00000010 [ 16.275173] PVR_K: 59: TIMER : 0x0000000002dfa033 [ 16.275177] PVR_K: 59: BIF_FAULT_BANK0_MMU_STATUS : 0x00000000 [ 16.275180] PVR_K: 59: BIF_FAULT_BANK0_REQ_STATUS : 0x0000000000000000 [ 16.275183] PVR_K: 59: BIF_FAULT_BANK1_MMU_STATUS : 0x00000000 [ 16.275186] PVR_K: 59: BIF_FAULT_BANK1_REQ_STATUS : 0x0000000000000000 [ 16.275189] PVR_K: 59: BIF_MMU_STATUS : 0x00000000 [ 16.275192] PVR_K: 59: BIF_MMU_ENTRY : 0x00000000 [ 16.275195] PVR_K: 59: BIF_MMU_ENTRY_STATUS : 0x0000000000000000 [ 16.275198] PVR_K: 59: BIF_STATUS_MMU : 0x00000000 [ 16.275201] PVR_K: 59: BIF_READS_EXT_STATUS : 0x00000000 [ 16.275203] PVR_K: 59: BIF_READS_INT_STATUS : 0x00000000 [ 16.275206] PVR_K: 59: BIFPM_STATUS_MMU : 0x00000000 [ 16.275209] PVR_K: 59: BIFPM_READS_EXT_STATUS : 0x00000000 [ 16.275212] PVR_K: 59: BIFPM_READS_INT_STATUS : 0x00000000 [ 16.275216] PVR_K: 59: BIF_CAT_BASE_INDEX : 0x0000000000000100 [ 16.275219] PVR_K: 59: BIF_CAT_BASE0 : 0x00000000835d2000 [ 16.275222] PVR_K: 59: BIF_CAT_BASE1 : 0x0000000083935000 [ 16.275225] PVR_K: 59: BIF_CAT_BASE2 : 0x0000000000000000 [ 16.275228] PVR_K: 59: BIF_CAT_BASE3 : 0x0000000000000000 [ 16.275232] PVR_K: 59: BIF_CAT_BASE4 : 0x0000000000000000 [ 16.275235] PVR_K: 59: BIF_CAT_BASE5 : 0x0000000000000000 [ 16.275238] PVR_K: 59: BIF_CAT_BASE6 : 0x0000000000000000 [ 16.275241] PVR_K: 59: BIF_CAT_BASE7 : 0x0000000000000000 [ 16.275245] PVR_K: 59: BIF_CTRL_INVAL : 0x00000000 [ 16.275247] PVR_K: 59: BIF_CTRL : 0x00000000 [ 16.275250] PVR_K: 59: BIF_PM_CAT_BASE_VCE0 : 0x0000000000000000 [ 16.275253] PVR_K: 59: BIF_PM_CAT_BASE_TE0 : 0x0000000000000000 [ 16.275256] PVR_K: 59: BIF_PM_CAT_BASE_ALIST0 : 0x0000000000000000 [ 16.275259] PVR_K: 59: BIF_PM_CAT_BASE_VCE1 : 0x0000000000000000 [ 16.275263] PVR_K: 59: BIF_PM_CAT_BASE_TE1 : 0x0000000000000000 [ 16.275266] PVR_K: 59: BIF_PM_CAT_BASE_ALIST1 : 0x0000000000000000 [ 16.275269] PVR_K: 59: MULTICORE_GEOMETRY_CTRL_COMMON: 0x00000000 [ 16.275272] PVR_K: 59: MULTICORE_FRAGMENT_CTRL_COMMON: 0x00000001 [ 16.275275] PVR_K: 59: MULTICORE_COMPUTE_CTRL_COMMON : 0x00000101 [ 16.275278] PVR_K: 59: PERF_TA_PHASE : 0x00000000 [ 16.275280] PVR_K: 59: PERF_TA_CYCLE : 0x00000000 [ 16.275283] PVR_K: 59: PERF_3D_PHASE : 0x00000010 [ 16.275286] PVR_K: 59: PERF_3D_CYCLE : 0x0005F4DE [ 16.275290] PVR_K: 59: PERF_TA_OR_3D_CYCLE : 0x0005F4DE [ 16.275292] PVR_K: 59: PERF_TA_AND_3D_CYCLE : 0x00000000 [ 16.275295] PVR_K: 59: PERF_COMPUTE_PHASE : 0x00000000 [ 16.275298] PVR_K: 59: PERF_COMPUTE_CYCLE : 0x00000000 [ 16.275301] PVR_K: 59: PM_PARTIAL_RENDER_ENABLE : 0x00000000 [ 16.275303] PVR_K: 59: ISP_RENDER : 0x00000003 [ 16.275306] PVR_K: 59: TLA_STATUS : 0x0000000000000000 [ 16.275310] PVR_K: 59: MCU_FENCE : 0x0000018000000000 [ 16.275312] PVR_K: 59: VDM_CONTEXT_STORE_STATUS : 0x00000001 [ 16.275315] PVR_K: 59: VDM_CONTEXT_STORE_TASK0 : 0x0000000000000000 [ 16.275319] PVR_K: 59: VDM_CONTEXT_STORE_TASK1 : 0x0000000000000000 [ 16.275322] PVR_K: 59: VDM_CONTEXT_STORE_TASK2 : 0x0000000000000000 [ 16.275325] PVR_K: 59: VDM_CONTEXT_RESUME_TASK0 : 0x0000000000000000 [ 16.275328] PVR_K: 59: VDM_CONTEXT_RESUME_TASK1 : 0x0000000000000000 [ 16.275331] PVR_K: 59: VDM_CONTEXT_RESUME_TASK2 : 0x0000000000000000 [ 16.275334] PVR_K: 59: ISP_CTL : 0x00025000 [ 16.275337] PVR_K: 59: ISP_STATUS : 0x00000003 [ 16.275340] PVR_K: 59: MTS_INTCTX : 0x00000000 [ 16.275342] PVR_K: 59: MTS_BGCTX : 0x00000000 [ 16.275345] PVR_K: 59: MTS_BGCTX_COUNTED_SCHEDULE : 0x00000000 [ 16.275348] PVR_K: 59: MTS_SCHEDULE : 0x00000000 [ 16.275350] PVR_K: 59: MTS_GPU_INT_STATUS : 0x00000010 [ 16.275353] PVR_K: 59: CDM_CONTEXT_STORE_STATUS : 0x00000000 [ 16.275357] PVR_K: 59: CDM_CONTEXT_PDS0 : 0x0000000000000000 [ 16.275360] PVR_K: 59: CDM_CONTEXT_PDS1 : 0x0000000000000000 [ 16.275363] PVR_K: 59: CDM_TERMINATE_PDS : 0x0000000000000000 [ 16.275366] PVR_K: 59: CDM_TERMINATE_PDS1 : 0x0000000000000000 [ 16.275369] PVR_K: 59: CDM_CONTEXT_LOAD_PDS0 : 0x0000000000000000 [ 16.275373] PVR_K: 59: CDM_CONTEXT_LOAD_PDS1 : 0x0000000000000000 [ 16.275375] PVR_K: 59: SIDEKICK_IDLE : 0x0000007F [ 16.275379] PVR_K: 59: SLC_IDLE : 0x000000FF [ 16.275381] PVR_K: 59: SLC_STATUS0 : 0x00000000 [ 16.275385] PVR_K: 59: SLC_STATUS1 : 0x0000000000000000 [ 16.275388] PVR_K: 59: SLC_STATUS2 : 0x0000000000000000 [ 16.275391] PVR_K: 59: SLC_CTRL_BYPASS : 0x00000000 [ 16.275394] PVR_K: 59: SLC_CTRL_MISC : 0x0000000000200003 [ 16.275397] PVR_K: 59: SAFETY_EVENT_STATUS__ROGUEXE : 0x00000010 [ 16.275399] PVR_K: 59: MTS_SAFETY_EVENT_ENABLE__ROGUEXE: 0x000000FF [ 16.275402] PVR_K: 59: FWCORE_WDT_CTRL : 0x00001E01 [ 16.275406] PVR_K: 59: SCRATCH0 : 0x00000000 [ 16.275409] PVR_K: 59: SCRATCH1 : 0x00000000 [ 16.275412] PVR_K: 59: SCRATCH2 : 0x00000000 [ 16.275414] PVR_K: 59: SCRATCH3 : 0x00000000 [ 16.275417] PVR_K: 59: SCRATCH4 : 0x00000000 [ 16.275420] PVR_K: 59: SCRATCH5 : 0x00000000 [ 16.275423] PVR_K: 59: SCRATCH6 : 0x00000000 [ 16.275425] PVR_K: 59: SCRATCH7 : 0x00000000 [ 16.275428] PVR_K: 59: SCRATCH8 : 0x00000000 [ 16.275431] PVR_K: 59: SCRATCH9 : 0x00000000 [ 16.275434] PVR_K: 59: SCRATCH10 : 0x00000000 [ 16.275436] PVR_K: 59: SCRATCH11 : 0x00000000 [ 16.275439] PVR_K: 59: SCRATCH12 : 0x00000000 [ 16.275441] PVR_K: 59: SCRATCH13 : 0x00000000 [ 16.275444] PVR_K: 59: SCRATCH14 : 0x00000000 [ 16.275447] PVR_K: 59: SCRATCH15 : 0x00000000 [ 16.275452] PVR_K: 59: FWCORE_MEM_CAT_BASE0 : 0x00000000835d2000 [ 16.275455] PVR_K: 59: FWCORE_MEM_CAT_BASE1 : 0x0000000083935000 [ 16.275458] PVR_K: 59: FWCORE_MEM_CAT_BASE2 : 0x0000000000000000 [ 16.275462] PVR_K: 59: FWCORE_MEM_CAT_BASE3 : 0x0000000000000000 [ 16.275465] PVR_K: 59: FWCORE_MEM_CAT_BASE4 : 0x0000000000000000 [ 16.275469] PVR_K: 59: FWCORE_MEM_CAT_BASE5 : 0x0000000000000000 [ 16.275472] PVR_K: 59: FWCORE_MEM_CAT_BASE6 : 0x0000000000000000 [ 16.275475] PVR_K: 59: FWCORE_MEM_CAT_BASE7 : 0x0000000000000000 [ 16.275479] PVR_K: 59: FWCORE_ADDR_REMAP_CONFIG4 : 0x120000e1c0002000 [ 16.275482] PVR_K: 59: FWCORE_ADDR_REMAP_CONFIG5 : 0x220000e1c001d000 [ 16.275486] PVR_K: 59: FWCORE_ADDR_REMAP_CONFIG6 : 0x220000e1c0000000 [ 16.275489] PVR_K: 59: FWCORE_ADDR_REMAP_CONFIG12 : 0x120000e1c0000000 [ 16.275492] PVR_K: 59: FWCORE_ADDR_REMAP_CONFIG13 : 0x220000e1c0000000 [ 16.275495] PVR_K: 59: FWCORE_ADDR_REMAP_CONFIG14 : 0x000000e1c0000000 [ 16.275498] PVR_K: 59: FWCORE_MEM_FAULT_MMU_STATUS : 0x00000000 [ 16.275501] PVR_K: 59: FWCORE_MEM_FAULT_REQ_STATUS : 0x0000000000000000 [ 16.275504] PVR_K: 59: FWCORE_MEM_MMU_STATUS : 0x00000000 [ 16.275507] PVR_K: 59: FWCORE_MEM_READS_EXT_STATUS : 0x00000000 [ 16.275510] PVR_K: 59: FWCORE_MEM_READS_INT_STATUS : 0x00000000 [ 16.275512] PVR_K: 59: ---- [ RISC-V internal state ] ---- [ 16.275520] PVR_K: 59: pc : 0x40004004 [ 16.275524] PVR_K: 59: ra : 0x4001A0A6 [ 16.275528] PVR_K: 59: sp : 0x50001010 [ 16.275532] PVR_K: 59: mepc : 0x40004004 [ 16.275537] PVR_K: 59: mcause : 0x8000000B [ 16.275541] PVR_K: 59: mdseac : 0x00000000 [ 16.275545] PVR_K: 59: mstatus : 0x00001888 [ 16.275549] PVR_K: 59: mie : 0x40000888 [ 16.275553] PVR_K: 59: mip : 0x00000000 [ 16.275557] PVR_K: 59: mscratch : 0x00000000 [ 16.275561] PVR_K: 59: mbvnc0 : 0x00010001 [ 16.275565] PVR_K: 59: mbvnc1 : 0x0032000B [ 16.275569] PVR_K: 59: micect : 0x10000000 [ 16.275573] PVR_K: 59: mdcect : 0x10000000 [ 16.275577] PVR_K: 59: mdcrfct : 0x10000000 [ 16.275582] PVR_K: 59: ------[ RGX FW Trace Info ]------ [ 16.275585] PVR_K: 59: Debug log type: none [ 16.275588] PVR_K: 59: RGX FW thread 0: Trace buffer not yet allocated [ 16.275591] PVR_K: 59: ------[ Full CCB Status ]------ [ 16.275598] PVR_K: 59: FWCtx 0x6002F300 (TQ_3D-P244-T289-vx_app_multi_) [ 16.275603] PVR_K: 59: |--Ready TQ_3D @ 4000 Int=17 Ext=17 [ 16.275607] PVR_K: 59: |--Ready UPDATE @ 4200 Int=17 Ext=17 [ 16.275611] PVR_K: 59: | `--Addr:0xd0082000 Val=0x00000011 [ 16.275614] PVR_K: 59: |--Ready TQ_3D @ 4248 Int=18 Ext=18 [ 16.275617] PVR_K: 59: |--Ready UPDATE @ 4448 Int=18 Ext=18 [ 16.275620] PVR_K: 59: | `--Addr:0xd0082000 Val=0x00000012 [ 16.275622] PVR_K: 59: |--Ready TQ_3D @ 4496 Int=19 Ext=19 [ 16.275625] PVR_K: 59: |--Ready UPDATE @ 4696 Int=19 Ext=19 [ 16.275628] PVR_K: 59: | `--Addr:0xd0082000 Val=0x00000013 [ 16.275631] PVR_K: 59: |--Ready TQ_3D @ 4744 Int=20 Ext=20 [ 16.275634] PVR_K: 59: |--Ready UPDATE @ 4944 Int=20 Ext=20 [ 16.275636] PVR_K: 59: | `--Addr:0xd0082000 Val=0x00000014 [ 16.275639] PVR_K: 59: |--Ready TQ_3D @ 4992 Int=21 Ext=21 [ 16.275642] PVR_K: 59: `--Ready UPDATE @ 5192 Int=21 Ext=21 [ 16.275645] PVR_K: 59: |--Addr:0xd0082000 Val=0x00000015 [ 16.275647] PVR_K: 59: `--Addr:0xd0083021 Val=0x00000519 [ 16.275653] PVR_K: 59: FWCtx 0x6002F040 (TA-P244-T289-vx_app_multi_ca) [ 16.275655] PVR_K: 59: `-- [ 16.275660] PVR_K: 59: FWCtx 0x6002F0E0 (3D-P244-T289-vx_app_multi_ca) [ 16.275662] PVR_K: 59: `-- [ 16.275666] PVR_K: 59: ------[ RGX Device ID:0 End ]------ [ 16.275670] PVR_K: 59: ------[ System Summary Device ID:0 ]------ [ 16.275672] PVR_K: 59: Device System Power State: ON [ 16.275675] PVR_K: 59: MaxHWTOut: 500000us, WtTryCt: 10000, WDGTOut(on,off): (10000ms,3600000ms) [ 16.275679] PVR_K: 59: ------[ Server Thread Summary ]------ [ 16.275684] PVR_K: 59: pvr_defer_free : Running [ 16.275687] PVR_K: 59: Number of deferred cleanup items : 0 [ 16.275689] PVR_K: 59: pvr_device_wdg : Running [ 16.275692] PVR_K: 59: pvr_cacheop : Running [ 16.275698] PVR_K: 59: Configuration: QSZ: 16, UKT: -1, KDFT: 131072, LINESIZE: 64, PGSIZE: 4096, KDF: Yes, URBF: Yes [ 16.275700] PVR_K: 59: Pending deferred CacheOp entries : 0 [ 16.275703] PVR_K: 59: ------[ AppHint Settings ]------ [ 16.275707] PVR_K: 59: Build Vars [ 16.275712] PVR_K: 59: EnableTrustedDeviceAceConfig: N [ 16.275715] PVR_K: 59: CleanupThreadPriority: 0x00000005 [ 16.275718] PVR_K: 59: CacheOpThreadPriority: 0x00000001 [ 16.275720] PVR_K: 59: WatchdogThreadPriority: 0x00000000 [ 16.275723] PVR_K: 59: HWPerfClientBufferSize: 0x000c0000 [ 16.275725] PVR_K: 59: Module Params [ 16.275735] PVR_K: 59: none [ 16.275737] PVR_K: 59: Debug Info Params [ 16.275743] PVR_K: 59: CacheOpConfig: 0x0000000c [ 16.275746] PVR_K: 59: CacheOpUMKMThresholdSize: 0xffffffff [ 16.275749] PVR_K: 59: Debug Info Params Device ID: 0 [ 16.275754] PVR_K: 59: none [ 16.275758] PVR_K: 59: ------[ HTB Log state: Off ]------ [ 16.275761] PVR_K: 59: ------[ Active Sync Checkpoints ]------ [ 16.275766] PVR_K: 59: - ID = 4, FWAddr = 0xd0083020, r1:e1:f0: TQM [ 16.275769] PVR_K: 59: - ID = 3, FWAddr = 0xd0083018, r1:e1:f0: TQM [ 16.275773] PVR_K: 59: - ID = 2, FWAddr = 0xd0083010, r1:e1:f0: TQM [ 16.326500] PVR_K: 59: ------------[ PVR DBG: END ]------------ [ 16.326651] WARNING: CPU: 0 PID: 59 at /media/tda4vl/tda4vl-linux-v805/board-support/extra-drivers/ti-img-rogue-driver-1.15.6133109/binary_j721s2_linux_wayland_release/target_aarch64/kbuild/services/server/common/pvr_notifier.c:529 PVRSRVDebugRequest+0x4a8/0x618 [pvrsrvkm] [ 16.326654] Modules linked in: 8021q garp stp mrp llc cls_bpf sch_ingress davinci_mdio ti_am65_cpsw_nuss phylink phy_gmii_sel usb_f_mass_storage libcomposite usb_storage xhci_plat_hcd xhci_hcd cdns3 udc_core roles usbcore usb_common cdns3_ti sd_mod t10_pi crc_t10dif scsi_mod wave5 v4l2_mem2mem videobuf2_dma_contig videobuf2_v4l2 videobuf2_common videobuf2_memops videodev rpmsg_char ti_k3_r5_remoteproc ti_k3_dsp_remoteproc virtio_rpmsg_bus optee_rng rng_core rpmsg_kdrv_switch pvrsrvkm(O) [ 16.326769] Workqueue: pvr_misr MISRWrapper [pvrsrvkm] [ 16.326807] pc : PVRSRVDebugRequest+0x4a8/0x618 [pvrsrvkm] [ 16.326842] lr : PVRSRVDebugRequest+0x4a8/0x618 [pvrsrvkm] [ 16.326940] PVRSRVDebugRequest+0x4a8/0x618 [pvrsrvkm] [ 16.326970] PVRSRVSetDeviceSystemPowerState+0x110/0x208 [pvrsrvkm] [ 16.326998] RGXCheckFirmwareCCB+0x360/0x5f0 [pvrsrvkm] [ 16.327026] RGX_MISRHandler_Main+0x64/0x2d8 [pvrsrvkm] [ 16.327054] MISRWrapper+0x1c/0x28 [pvrsrvkm] [ 16.327099] PVR_K:(Error): 59: RGXCheckFirmwareCCB: Failed firmware restart (PVRSRV_ERROR_TIMEOUT) [4627] [ 21.212238] PVR_K:(Error): 192: DevicesWatchdogThread: Device status not OK!!! [500] [ 21.220886] PVR_K: 192: ------------[ PVR DBG: START (High) ]------------ [ 21.220897] PVR_K: 192: OS kernel info: Linux 5.10.153-g90c3a58fd2 #2 SMP PREEMPT Wed Aug 6 11:23:30 CST 2025 aarch64 [ 21.220901] PVR_K: 192: DDK info: Rogue_DDK_Linux_WS rogueddk 1.15@6133109 (release) j721s2_linux [ 21.220904] PVR_K: 192: Time now: 21220902us [ 21.220907] PVR_K: 192: Services State: OK [ 21.220911] PVR_K: 192: Server Errors: 4 [ 21.220920] PVR_K: 192: Connections Device ID:0(128) P244-V244-T289-vx_app_multi_ca [ 21.220923] PVR_K: 192: ------[ Driver Info ]------ [ 21.220926] PVR_K: 192: Comparison of UM/KM components: MATCHING [ 21.220928] PVR_K: 192: KM Arch: 64 Bit [ 21.220931] PVR_K: 192: UM Connected Clients: 64 Bit [ 21.220935] PVR_K: 192: UM info: 1.15 @ 6133109 (release) build options: 0x80000810 [ 21.220938] PVR_K: 192: KM info: 1.15 @ 6133109 (release) build options: 0x00000810 [ 21.220940] PVR_K: 192: Window system: wayland [ 21.220949] PVR_K: 192: ------[ RGX Device ID:0 Start ]------ [ 21.220952] PVR_K: 192: ------[ RGX Info ]------ [ 21.220957] PVR_K: 192: Device Node (Info): 0000000078c52582 (00000000532a8ce9) [ 21.220960] PVR_K: 192: RGX BVNC: 36.53.104.796 (rogue) [ 21.220963] PVR_K: 192: RGX Device State: Active [ 21.220966] PVR_K: 192: RGX Power State: ON [ 21.220969] PVR_K: 192: FW info: 1.15 @ 6133109 (release) build options: 0x80000810 [ 21.220976] PVR_K: 192: BIF0 - OK [ 21.220980] PVR_K: 192: BIF1 - OK [ 21.220984] PVR_K: 192: FWCORE - OK [ 21.220991] PVR_K: 192: RGX FW State: FAULT - Restarting (HWRState 0x000000c1: HWR OK; FW fault; Restarting;) [ 21.220996] PVR_K: 192: RGX FW Power State: RGXFWIF_POW_OFF (APM disabled: 0 ok, 0 denied, 0 non-idle, 0 retry, 0 other, 0 total. Latency: 100 ms) [ 21.221001] PVR_K: 192: RGX DVFS: 0 frequency changes. Current frequency: 799.999 MHz (sampled at 13353604770 ns). FW frequency: 800.000 MHz. [ 21.221007] PVR_K: 192: RGX FW OS 0 - State: active; Freelists: Ok; Priority: 0; MTS on; [ 21.221011] PVR_K: 192: FW Fault 1: "Unknown KCCB command" (firmware/rgxfw_kernel_ccb.c:1156) [ 21.221015] PVR_K: 192: Data = 0x600234c8, CRTimer = 0x00000281954e, OSTimer = 14.302780450 [ 21.221019] PVR_K: 192: RGX Kernel CCB WO:0x1D RO:0x18 [ 21.221022] PVR_K: 192: RGX Firmware CCB WO:0x1 RO:0x1 [ 21.221024] PVR_K: 192: RGX Kernel CCB commands executed = 25 [ 21.221028] PVR_K: 192: RGX SLR: Forced UFO updates requested = 0 [ 21.221031] PVR_K: 192: RGX Errors: WGP:0, TRP:0 [ 21.221034] PVR_K: 192: Thread0: FW IRQ count = 22 [ 21.221036] PVR_K: 192: Last sampled IRQ count in LISR = 22 [ 21.221041] PVR_K: 192: FW System config flags = 0x00020000 (Ctx switch options: Medium CSW profile; VDM CS INDEX mode;) [ 21.221045] PVR_K: 192: FW OS config flags = 0x0000000F (Ctx switch: TDM; TA; 3D; CDM;) [ 21.221049] PVR_K: 192: ------[ RGX registers ]------ [ 21.221052] PVR_K: 192: RGX Register Base Address (Linear): 0x00000000d337864c [ 21.221055] PVR_K: 192: RGX Register Base Address (Physical): 0x4E20000000 [ 21.221060] PVR_K: 192: CORE_ID : 0x0000000008470000 [ 21.221063] PVR_K: 192: CORE_REVISION : 0x0068031C [ 21.221066] PVR_K: 192: DESIGNER_REV_FIELD1 : 0x00000000 [ 21.221069] PVR_K: 192: DESIGNER_REV_FIELD2 : 0x00000000 [ 21.221072] PVR_K: 192: CHANGESET_NUMBER : 0x0000000000000000 [ 21.221075] PVR_K: 192: MULTICORE_SYSTEM : 0x00000001 [ 21.221079] PVR_K: 192: MULTICORE_GPU : 0x00000078 [ 21.221082] PVR_K: 192: CLK_CTRL : 0x002aaa002a22aaaa [ 21.221085] PVR_K: 192: CLK_STATUS : 0x0000000000600000 [ 21.221283] PVR_K: 192: CLK_CTRL2 : 0x0000000000000000 [ 21.221288] PVR_K: 192: CLK_STATUS2 : 0x0000000000000000 [ 21.221292] PVR_K: 192: EVENT_STATUS : 0x00000010 [ 21.221296] PVR_K: 192: TIMER : 0x0000000003cb79ad [ 21.221300] PVR_K: 192: BIF_FAULT_BANK0_MMU_STATUS : 0x00000000 [ 21.221303] PVR_K: 192: BIF_FAULT_BANK0_REQ_STATUS : 0x0000000000000000 [ 21.221306] PVR_K: 192: BIF_FAULT_BANK1_MMU_STATUS : 0x00000000 [ 21.221309] PVR_K: 192: BIF_FAULT_BANK1_REQ_STATUS : 0x0000000000000000 [ 21.221313] PVR_K: 192: BIF_MMU_STATUS : 0x00000000 [ 21.221315] PVR_K: 192: BIF_MMU_ENTRY : 0x00000000 [ 21.221318] PVR_K: 192: BIF_MMU_ENTRY_STATUS : 0x0000000000000000 [ 21.221323] PVR_K: 192: BIF_STATUS_MMU : 0x00000000 [ 21.221325] PVR_K: 192: BIF_READS_EXT_STATUS : 0x00000000 [ 21.221328] PVR_K: 192: BIF_READS_INT_STATUS : 0x00000000 [ 21.221331] PVR_K: 192: BIFPM_STATUS_MMU : 0x00000000 [ 21.221334] PVR_K: 192: BIFPM_READS_EXT_STATUS : 0x00000000 [ 21.221336] PVR_K: 192: BIFPM_READS_INT_STATUS : 0x00000000 [ 21.221340] PVR_K: 192: BIF_CAT_BASE_INDEX : 0x0000000000000100 [ 21.221343] PVR_K: 192: BIF_CAT_BASE0 : 0x00000000835d2000 [ 21.221346] PVR_K: 192: BIF_CAT_BASE1 : 0x0000000083935000 [ 21.221349] PVR_K: 192: BIF_CAT_BASE2 : 0x0000000000000000 [ 21.221352] PVR_K: 192: BIF_CAT_BASE3 : 0x0000000000000000 [ 21.221355] PVR_K: 192: BIF_CAT_BASE4 : 0x0000000000000000 [ 21.221358] PVR_K: 192: BIF_CAT_BASE5 : 0x0000000000000000 [ 21.221360] PVR_K: 192: BIF_CAT_BASE6 : 0x0000000000000000 [ 21.221363] PVR_K: 192: BIF_CAT_BASE7 : 0x0000000000000000 [ 21.221367] PVR_K: 192: BIF_CTRL_INVAL : 0x00000000 [ 21.221370] PVR_K: 192: BIF_CTRL : 0x00000000 [ 21.221373] PVR_K: 192: BIF_PM_CAT_BASE_VCE0 : 0x0000000000000000 [ 21.221376] PVR_K: 192: BIF_PM_CAT_BASE_TE0 : 0x0000000000000000 [ 21.221379] PVR_K: 192: BIF_PM_CAT_BASE_ALIST0 : 0x0000000000000000 [ 21.221382] PVR_K: 192: BIF_PM_CAT_BASE_VCE1 : 0x0000000000000000 [ 21.221386] PVR_K: 192: BIF_PM_CAT_BASE_TE1 : 0x0000000000000000 [ 21.221388] PVR_K: 192: BIF_PM_CAT_BASE_ALIST1 : 0x0000000000000000 [ 21.221391] PVR_K: 192: MULTICORE_GEOMETRY_CTRL_COMMON: 0x00000000 [ 21.221394] PVR_K: 192: MULTICORE_FRAGMENT_CTRL_COMMON: 0x00000001 [ 21.221398] PVR_K: 192: MULTICORE_COMPUTE_CTRL_COMMON : 0x00000101 [ 21.221400] PVR_K: 192: PERF_TA_PHASE : 0x00000000 [ 21.221403] PVR_K: 192: PERF_TA_CYCLE : 0x00000000 [ 21.221405] PVR_K: 192: PERF_3D_PHASE : 0x00000010 [ 21.221408] PVR_K: 192: PERF_3D_CYCLE : 0x0005F4DE [ 21.221412] PVR_K: 192: PERF_TA_OR_3D_CYCLE : 0x0005F4DE [ 21.221414] PVR_K: 192: PERF_TA_AND_3D_CYCLE : 0x00000000 [ 21.221417] PVR_K: 192: PERF_COMPUTE_PHASE : 0x00000000 [ 21.221420] PVR_K: 192: PERF_COMPUTE_CYCLE : 0x00000000 [ 21.221423] PVR_K: 192: PM_PARTIAL_RENDER_ENABLE : 0x00000000 [ 21.221425] PVR_K: 192: ISP_RENDER : 0x00000003 [ 21.221428] PVR_K: 192: TLA_STATUS : 0x0000000000000000 [ 21.221431] PVR_K: 192: MCU_FENCE : 0x0000018000000000 [ 21.221434] PVR_K: 192: VDM_CONTEXT_STORE_STATUS : 0x00000001 [ 21.221437] PVR_K: 192: VDM_CONTEXT_STORE_TASK0 : 0x0000000000000000 [ 21.221440] PVR_K: 192: VDM_CONTEXT_STORE_TASK1 : 0x0000000000000000 [ 21.221443] PVR_K: 192: VDM_CONTEXT_STORE_TASK2 : 0x0000000000000000 [ 21.221447] PVR_K: 192: VDM_CONTEXT_RESUME_TASK0 : 0x0000000000000000 [ 21.221450] PVR_K: 192: VDM_CONTEXT_RESUME_TASK1 : 0x0000000000000000 [ 21.221453] PVR_K: 192: VDM_CONTEXT_RESUME_TASK2 : 0x0000000000000000 [ 21.221456] PVR_K: 192: ISP_CTL : 0x00025000 [ 21.221459] PVR_K: 192: ISP_STATUS : 0x00000003 [ 21.221462] PVR_K: 192: MTS_INTCTX : 0x00000000 [ 21.221464] PVR_K: 192: MTS_BGCTX : 0x00000001 [ 21.221467] PVR_K: 192: MTS_BGCTX_COUNTED_SCHEDULE : 0x00000000 [ 21.221470] PVR_K: 192: MTS_SCHEDULE : 0x00000000 [ 21.221472] PVR_K: 192: MTS_GPU_INT_STATUS : 0x00000010 [ 21.221475] PVR_K: 192: CDM_CONTEXT_STORE_STATUS : 0x00000000 [ 21.221478] PVR_K: 192: CDM_CONTEXT_PDS0 : 0x0000000000000000 [ 21.221481] PVR_K: 192: CDM_CONTEXT_PDS1 : 0x0000000000000000 [ 21.221484] PVR_K: 192: CDM_TERMINATE_PDS : 0x0000000000000000 [ 21.221487] PVR_K: 192: CDM_TERMINATE_PDS1 : 0x0000000000000000 [ 21.221490] PVR_K: 192: CDM_CONTEXT_LOAD_PDS0 : 0x0000000000000000 [ 21.221494] PVR_K: 192: CDM_CONTEXT_LOAD_PDS1 : 0x0000000000000000 [ 21.221497] PVR_K: 192: SIDEKICK_IDLE : 0x0000007F [ 21.221499] PVR_K: 192: SLC_IDLE : 0x000000FF [ 21.221502] PVR_K: 192: SLC_STATUS0 : 0x00000000 [ 21.221505] PVR_K: 192: SLC_STATUS1 : 0x0000000000000000 [ 21.221509] PVR_K: 192: SLC_STATUS2 : 0x0000000000000000 [ 21.221512] PVR_K: 192: SLC_CTRL_BYPASS : 0x00000000 [ 21.221515] PVR_K: 192: SLC_CTRL_MISC : 0x0000000000200003 [ 21.221518] PVR_K: 192: SAFETY_EVENT_STATUS__ROGUEXE : 0x00000000 [ 21.221521] PVR_K: 192: MTS_SAFETY_EVENT_ENABLE__ROGUEXE: 0x000000FF [ 21.221524] PVR_K: 192: FWCORE_WDT_CTRL : 0x00000000 [ 21.221527] PVR_K: 192: SCRATCH0 : 0x00000000 [ 21.221530] PVR_K: 192: SCRATCH1 : 0x00000000 [ 21.221533] PVR_K: 192: SCRATCH2 : 0x00000000 [ 21.221535] PVR_K: 192: SCRATCH3 : 0x00000000 [ 21.221538] PVR_K: 192: SCRATCH4 : 0x00000000 [ 21.221541] PVR_K: 192: SCRATCH5 : 0x00000000 [ 21.221543] PVR_K: 192: SCRATCH6 : 0x00000000 [ 21.221546] PVR_K: 192: SCRATCH7 : 0x00000000 [ 21.221549] PVR_K: 192: SCRATCH8 : 0x00000000 [ 21.221551] PVR_K: 192: SCRATCH9 : 0x00000000 [ 21.221554] PVR_K: 192: SCRATCH10 : 0x00000000 [ 21.221556] PVR_K: 192: SCRATCH11 : 0x00000000 [ 21.221559] PVR_K: 192: SCRATCH12 : 0x00000000 [ 21.221562] PVR_K: 192: SCRATCH13 : 0x00000000 [ 21.221564] PVR_K: 192: SCRATCH14 : 0x00000000 [ 21.221567] PVR_K: 192: SCRATCH15 : 0x00000000 [ 21.221572] PVR_K: 192: FWCORE_MEM_CAT_BASE0 : 0x00000000835d2000 [ 21.221575] PVR_K: 192: FWCORE_MEM_CAT_BASE1 : 0x0000000083935000 [ 21.221578] PVR_K: 192: FWCORE_MEM_CAT_BASE2 : 0x0000000000000000 [ 21.221581] PVR_K: 192: FWCORE_MEM_CAT_BASE3 : 0x0000000000000000 [ 21.221585] PVR_K: 192: FWCORE_MEM_CAT_BASE4 : 0x0000000000000000 [ 21.221588] PVR_K: 192: FWCORE_MEM_CAT_BASE5 : 0x0000000000000000 [ 21.221591] PVR_K: 192: FWCORE_MEM_CAT_BASE6 : 0x0000000000000000 [ 21.221595] PVR_K: 192: FWCORE_MEM_CAT_BASE7 : 0x0000000000000000 [ 21.221598] PVR_K: 192: FWCORE_ADDR_REMAP_CONFIG4 : 0x120000e1c0002000 [ 21.221602] PVR_K: 192: FWCORE_ADDR_REMAP_CONFIG5 : 0x220000e1c001d000 [ 21.221605] PVR_K: 192: FWCORE_ADDR_REMAP_CONFIG6 : 0x220000e1c0000000 [ 21.221608] PVR_K: 192: FWCORE_ADDR_REMAP_CONFIG12 : 0x120000e1c0000000 [ 21.221612] PVR_K: 192: FWCORE_ADDR_REMAP_CONFIG13 : 0x220000e1c0000000 [ 21.221615] PVR_K: 192: FWCORE_ADDR_REMAP_CONFIG14 : 0x000000e1c0000000 [ 21.221617] PVR_K: 192: FWCORE_MEM_FAULT_MMU_STATUS : 0x00000000 [ 21.221620] PVR_K: 192: FWCORE_MEM_FAULT_REQ_STATUS : 0x0000000000000000 [ 21.221623] PVR_K: 192: FWCORE_MEM_MMU_STATUS : 0x00000000 [ 21.221626] PVR_K: 192: FWCORE_MEM_READS_EXT_STATUS : 0x00000000 [ 21.221629] PVR_K: 192: FWCORE_MEM_READS_INT_STATUS : 0x00000000 [ 21.221631] PVR_K: 192: ---- [ RISC-V internal state ] ---- [ 21.221638] PVR_K: 192: pc : 0x4000B95C [ 21.221642] PVR_K: 192: ra : 0x4000B93A [ 21.221646] PVR_K: 192: sp : 0x50000E98 [ 21.221650] PVR_K: 192: mepc : 0x4000B4A2 [ 21.221654] PVR_K: 192: mcause : 0x8000000B [ 21.221658] PVR_K: 192: mdseac : 0x00000000 [ 21.221662] PVR_K: 192: mstatus : 0x00001888 [ 21.221666] PVR_K: 192: mie : 0x40000888 [ 21.221670] PVR_K: 192: mip : 0x00000000 [ 21.221673] PVR_K: 192: mscratch : 0x00000000 [ 21.221677] PVR_K: 192: mbvnc0 : 0x00010001 [ 21.221681] PVR_K: 192: mbvnc1 : 0x0032000B [ 21.221685] PVR_K: 192: micect : 0x10000000 [ 21.221689] PVR_K: 192: mdcect : 0x10000000 [ 21.221693] PVR_K: 192: mdcrfct : 0x10000000 [ 21.221697] PVR_K: 192: ------[ RGX FW Trace Info ]------ [ 21.221700] PVR_K: 192: Debug log type: none [ 21.221702] PVR_K: 192: RGX FW thread 0: Trace buffer not yet allocated [ 21.221705] PVR_K: 192: ------[ Full CCB Status ]------ [ 21.221712] PVR_K: 192: FWCtx 0x6002F300 (TQ_3D-P244-T289-vx_app_multi_) [ 21.221717] PVR_K: 192: |--Ready TQ_3D @ 4000 Int=17 Ext=17 [ 21.221721] PVR_K: 192: |--Ready UPDATE @ 4200 Int=17 Ext=17 [ 21.221725] PVR_K: 192: | `--Addr:0xd0082000 Val=0x00000011 [ 21.221728] PVR_K: 192: |--Ready TQ_3D @ 4248 Int=18 Ext=18 [ 21.221731] PVR_K: 192: |--Ready UPDATE @ 4448 Int=18 Ext=18 [ 21.221734] PVR_K: 192: | `--Addr:0xd0082000 Val=0x00000012 [ 21.221736] PVR_K: 192: |--Ready TQ_3D @ 4496 Int=19 Ext=19 [ 21.221739] PVR_K: 192: |--Ready UPDATE @ 4696 Int=19 Ext=19 [ 21.221742] PVR_K: 192: | `--Addr:0xd0082000 Val=0x00000013 [ 21.221744] PVR_K: 192: |--Ready TQ_3D @ 4744 Int=20 Ext=20 [ 21.221747] PVR_K: 192: |--Ready UPDATE @ 4944 Int=20 Ext=20 [ 21.221750] PVR_K: 192: | `--Addr:0xd0082000 Val=0x00000014 [ 21.221753] PVR_K: 192: |--Ready TQ_3D @ 4992 Int=21 Ext=21 [ 21.221755] PVR_K: 192: |--Ready UPDATE @ 5192 Int=21 Ext=21 [ 21.221758] PVR_K: 192: | |--Addr:0xd0082000 Val=0x00000015 [ 21.221760] PVR_K: 192: | `--Addr:0xd0083021 Val=0x00000519 [ 21.221764] PVR_K: 192: |--Waiting TQ_3D @ 5248 Int=22 Ext=22 [ 21.221767] PVR_K: 192: |--Waiting UPDATE @ 5448 Int=22 Ext=22 [ 21.221769] PVR_K: 192: | `--Addr:0xd0082000 Val=0x00000016 [ 21.221772] PVR_K: 192: |--Waiting TQ_3D @ 5496 Int=23 Ext=23 [ 21.221775] PVR_K: 192: |--Waiting UPDATE @ 5696 Int=23 Ext=23 [ 21.221778] PVR_K: 192: | `--Addr:0xd0082000 Val=0x00000017 [ 21.221780] PVR_K: 192: |--Waiting TQ_3D @ 5744 Int=24 Ext=24 [ 21.221784] PVR_K: 192: |--Waiting UPDATE @ 5944 Int=24 Ext=24 [ 21.221786] PVR_K: 192: | `--Addr:0xd0082000 Val=0x00000018 [ 21.221789] PVR_K: 192: |--Waiting TQ_3D @ 5992 Int=25 Ext=25 [ 21.221792] PVR_K: 192: |--Waiting UPDATE @ 6192 Int=25 Ext=25 [ 21.221794] PVR_K: 192: | `--Addr:0xd0082000 Val=0x00000019 [ 21.221797] PVR_K: 192: |--Waiting TQ_3D @ 6240 Int=26 Ext=26 [ 21.221800] PVR_K: 192: `--Waiting UPDATE @ 6440 Int=26 Ext=26 [ 21.221803] PVR_K: 192: |--Addr:0xd0082000 Val=0x0000001a [ 21.221805] PVR_K: 192: `--Addr:0xd0083029 Val=0x00000519 [ 21.221810] PVR_K: 192: FWCtx 0x6002F040 (TA-P244-T289-vx_app_multi_ca) [ 21.221812] PVR_K: 192: `-- [ 21.221816] PVR_K: 192: FWCtx 0x6002F0E0 (3D-P244-T289-vx_app_multi_ca) [ 21.221818] PVR_K: 192: `-- [ 21.221823] PVR_K: 192: ------[ RGX Device ID:0 End ]------ [ 21.221828] PVR_K: 192: ------[ System Summary Device ID:0 ]------ [ 21.221830] PVR_K: 192: Device System Power State: ON [ 21.221833] PVR_K: 192: MaxHWTOut: 500000us, WtTryCt: 10000, WDGTOut(on,off): (10000ms,3600000ms) [ 21.221837] PVR_K: 192: ------[ Server Thread Summary ]------ [ 21.221841] PVR_K: 192: pvr_defer_free : Running [ 21.221845] PVR_K: 192: Number of deferred cleanup items : 0 [ 21.221847] PVR_K: 192: pvr_device_wdg : Running [ 21.221851] PVR_K: 192: pvr_cacheop : Running [ 21.221856] PVR_K: 192: Configuration: QSZ: 16, UKT: -1, KDFT: 131072, LINESIZE: 64, PGSIZE: 4096, KDF: Yes, URBF: Yes [ 21.221858] PVR_K: 192: Pending deferred CacheOp entries : 0 [ 21.221862] PVR_K: 192: ------[ AppHint Settings ]------ [ 21.221866] PVR_K: 192: Build Vars [ 21.221871] PVR_K: 192: EnableTrustedDeviceAceConfig: N [ 21.221874] PVR_K: 192: CleanupThreadPriority: 0x00000005 [ 21.221877] PVR_K: 192: CacheOpThreadPriority: 0x00000001 [ 21.221880] PVR_K: 192: WatchdogThreadPriority: 0x00000000 [ 21.221883] PVR_K: 192: HWPerfClientBufferSize: 0x000c0000 [ 21.221885] PVR_K: 192: Module Params [ 21.221897] PVR_K: 192: none [ 21.221899] PVR_K: 192: Debug Info Params [ 21.221906] PVR_K: 192: CacheOpConfig: 0x0000000c [ 21.221908] PVR_K: 192: CacheOpUMKMThresholdSize: 0xffffffff [ 21.221911] PVR_K: 192: Debug Info Params Device ID: 0 [ 21.221917] PVR_K: 192: none [ 21.221921] PVR_K: 192: ------[ HTB Log state: Off ]------ [ 21.221925] PVR_K: 192: ------[ Active Sync Checkpoints ]------ [ 21.221930] PVR_K: 192: - ID = 5, FWAddr = 0xd0083028, r1:e1:f0: TQM [ 21.221933] PVR_K: 192: - ID = 4, FWAddr = 0xd0083020, r1:e1:f0: TQM [ 21.221936] PVR_K: 192: - ID = 3, FWAddr = 0xd0083018, r1:e1:f0: TQM [ 21.221939] PVR_K: 192: - ID = 2, FWAddr = 0xd0083010, r1:e1:f0: TQM [ 21.281130] PVR_K: 192: ------------[ PVR DBG: END ]------------ [ 21.281283] WARNING: CPU: 0 PID: 192 at /media/tda4vl/tda4vl-linux-v805/board-support/extra-drivers/ti-img-rogue-driver-1.15.6133109/binary_j721s2_linux_wayland_release/target_aarch64/kbuild/services/server/common/pvr_notifier.c:529 PVRSRVDebugRequest+0x4a8/0x618 [pvrsrvkm] [ 21.281287] Modules linked in: 8021q garp stp mrp llc cls_bpf sch_ingress davinci_mdio ti_am65_cpsw_nuss phylink phy_gmii_sel usb_f_mass_storage libcomposite usb_storage xhci_plat_hcd xhci_hcd cdns3 udc_core roles usbcore usb_common cdns3_ti sd_mod t10_pi crc_t10dif scsi_mod wave5 v4l2_mem2mem videobuf2_dma_contig videobuf2_v4l2 videobuf2_common videobuf2_memops videodev rpmsg_char ti_k3_r5_remoteproc ti_k3_dsp_remoteproc virtio_rpmsg_bus optee_rng rng_core rpmsg_kdrv_switch pvrsrvkm(O) [ 21.281350] CPU: 0 PID: 192 Comm: pvr_device_wdg Tainted: G W O 5.10.153-g90c3a58fd2 #2 [ 21.281398] pc : PVRSRVDebugRequest+0x4a8/0x618 [pvrsrvkm] [ 21.281427] lr : PVRSRVDebugRequest+0x4a8/0x618 [pvrsrvkm] [ 21.281531] PVRSRVDebugRequest+0x4a8/0x618 [pvrsrvkm] [ 21.281567] DevicesWatchdogThread_ForEachVaCb+0x114/0x148 [pvrsrvkm] [ 21.281595] List_PVRSRV_DEVICE_NODE_ForEach_va+0x74/0xb0 [pvrsrvkm] [ 21.281627] DevicesWatchdogThread+0x144/0x210 [pvrsrvkm] [ 21.281656] OSThreadRun+0x24/0x60 [pvrsrvkm] root@tte:~# ( 289) PVR:(Error): FirmwareSync PVRSRVFenceWait failed. [ :588 ] root@tte:~# root@tte:~# root@tte:~# root@tte:~# root@tte:~# root@tte:~# ( 289) PVR:(Error): FirmwareSync PVRSRVFenceWait failed. [ :588 ] root@tte:~# root@tte:~# ( 289) PVR:(Error): FirmwareSync PVRSRVFenceWait failed. [ :588 ]