U-Boot SPL 2016.05-dirty (Sep 11 2018 - 09:16:48) DRA752-GP ES2.0 no pinctrl for hs200_1_8v no pinctrl for ddr_1_8v *** Warning - MMC init failed, using default environment Trying to boot from MMC1 reading dra7-ipu2-fw.xem4 *** Warning - MMC init failed, using default environment reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2016.05-dirty (Sep 11 2018 - 09:16:48 +0800) CPU : DRA752-GP ES2.0 Model: TI DRA742 Board: DRA74x EVM REV H.0 DRAM: 4 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 ** First descriptor is NOT a primary desc on 1:1 ** GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid GPT *** GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid Backup GPT *** ERROR: cannot find partition: 'userdata' at arch/arm/cpu/armv7/omap-common/utils.c:199/mmc_get_part_size() Warning: fastboot.userdata_size: unable to calc SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: Warning: ethernet@48484000 using MAC address from ROM eth0: ethernet@48484000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 285 bytes read in 2 ms (138.7 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 3553072 bytes read in 292 ms (11.6 MiB/s) 108307 bytes read in 67 ms (1.5 MiB/s) Booting from mmc0 ... 110644 bytes read in 126 ms (857.4 KiB/s) Kernel image @ 0x82000000 [ 0x000000 - 0x363730 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe1000, end 8ffff033 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.84-g742f84423d (tiiappadmin@swubn03) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 SMP PREEMPT Thu Dec 28 05:05:59 IST 2017 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA742 [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB [ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB [ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 32 MiB [ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009f000000, size 8 MiB [ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 64 MiB at 0x00000000fb000000 [ 0.000000] Forcing write-allocate cache policy for SMP [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x000000027fd00000 to fe600000 for dram barrier [ 0.000000] DRA752 ES2.0 [ 0.000000] PERCPU: Embedded 11 pages/cpu @eb724000 s14912 r8192 d21952 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040448 [ 0.000000] Kernel command line: console=ttyO0,115200n8 elevator=noop root=PARTUUID=e43d1d5b-02 rw rootwait earlyprintk fixrtc omapdrm.num_crtc=2 consoleblank=0 cma=64M rootfstype=ext4 snd.slots_reserved=1,1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 3890820K/4168704K available (6615K kernel code, 319K rwdata, 2456K rodata, 340K init, 290K bss, 48508K reserved, 229376K cma-reserved, 3320832K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08e402c (9073 kB) [ 0.000000] .init : 0xc08e5000 - 0xc093a000 ( 340 kB) [ 0.000000] .data : 0xc093a000 - 0xc0989ee0 ( 320 kB) [ 0.000000] .bss : 0xc098b000 - 0xc09d3800 ( 290 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.008305] Switching to timer-based delay loop, resolution 162ns [ 0.014955] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.025212] OMAP clocksource: 32k_counter at 32768 Hz [ 0.030971] Console: colour dummy device 80x30 [ 0.035624] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.042415] This ensures that you still see kernel messages. Please [ 0.048927] update your kernel commandline. [ 0.053316] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.063945] pid_max: default: 32768 minimum: 301 [ 0.068858] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.075742] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.083612] Initializing cgroup subsys io [ 0.087834] Initializing cgroup subsys memory [ 0.092405] Initializing cgroup subsys devices [ 0.097053] Initializing cgroup subsys freezer [ 0.101708] Initializing cgroup subsys perf_event [ 0.106622] Initializing cgroup subsys pids [ 0.111018] CPU: Testing write buffer coherency: ok [ 0.116315] /cpus/cpu@0 missing clock-frequency property [ 0.121858] /cpus/cpu@1 missing clock-frequency property [ 0.127413] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.133336] Setting up static identity map for 0x80008380 - 0x800083e0 [ 0.220401] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.220469] Brought up 2 CPUs [ 0.229485] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.235921] CPU: All CPU(s) started in HYP mode. [ 0.240740] CPU: Virtualization extensions available. [ 0.246398] devtmpfs: initialized [ 0.279910] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.288846] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.501419] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.511620] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.522696] pinctrl core: initialized pinctrl subsystem [ 0.529033] NET: Registered protocol family 16 [ 0.534673] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.563754] cpuidle: using governor ladder [ 0.593777] cpuidle: using governor menu [ 0.606795] OMAP GPIO hardware version 0.1 [ 0.615311] GPIO line 161 (radio_rst) hogged as output/low [ 0.623403] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.648893] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.654273] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.673175] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.681493] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.688048] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.695740] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.703992] OMAP DMA hardware revision 0.0 [ 0.749640] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.760598] edma 43300000.edma: memcpy is disabled [ 0.770402] edma 43300000.edma: TI EDMA DMA engine driver [ 0.780643] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.786705] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.792773] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.798833] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.805033] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.811106] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.820452] palmas 0-0058: IRQ missing: skipping irq request [ 0.837361] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0 [ 0.909667] pcf857x 0-0020: probed [ 0.913810] pcf857x 0-0021: probed [ 0.918083] pcf857x 0-0027: probed [ 0.921798] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.947876] GPIO line 447 (vin6_sel_s0) hogged as output/low [ 0.953857] pcf857x 1-0026: probed [ 0.958025] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz [ 0.964208] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 0.990262] pcf857x 3-0021: probed [ 0.993854] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz [ 0.999880] media: Linux media interface: v0.10 [ 1.004680] Linux video capture interface: v2.00 [ 1.009533] pps_core: LinuxPPS API ver. 1 registered [ 1.014724] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.024198] PTP clock support registered [ 1.028357] EDAC MC: Ver: 3.0.0 [ 1.032424] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 1.039067] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 1.045773] Advanced Linux Sound Architecture Driver Initialized. [ 1.052998] clocksource: Switched to clocksource arch_sys_counter [ 1.069871] NET: Registered protocol family 2 [ 1.074942] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.082314] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.089143] TCP: Hash tables configured (established 8192 bind 8192) [ 1.095804] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.101984] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.108804] NET: Registered protocol family 1 [ 1.113641] RPC: Registered named UNIX socket transport module. [ 1.119800] RPC: Registered udp transport module. [ 1.124726] RPC: Registered tcp transport module. [ 1.129635] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.137434] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 1.155986] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.162702] NFS: Registering the id_resolver key type [ 1.168051] Key type id_resolver registered [ 1.172427] Key type id_legacy registered [ 1.176704] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.182612] bounce: pool size: 64 pages [ 1.186812] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.194532] io scheduler noop registered (default) [ 1.199536] io scheduler deadline registered [ 1.204059] io scheduler cfq registered [ 1.213103] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 1.223898] PCI host bridge /ocp/axi@0/pcie_rc@51000000 ranges: [ 1.230061] No bus range found for /ocp/axi@0/pcie_rc@51000000, using [bus 00-ff] [ 1.238064] IO 0x20003000..0x20012fff -> 0x00000000 [ 1.243446] MEM 0x20013000..0x2fffffff -> 0x20013000 [ 1.281538] dra7-pcie 51000000.pcie_rc: link is not up [ 1.287069] dra7-pcie 51000000.pcie_rc: PCI host bridge to bus 0000:00 [ 1.293873] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.299588] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.306029] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 1.313585] PCI: bus0: Fast back to back transfers disabled [ 1.319502] PCI: bus1: Fast back to back transfers enabled [ 1.325311] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 1.332368] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 1.339439] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.344842] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 1.414096] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 1.424204] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 301, base_baud = 3000000) is a 8250 [ 1.433423] console [ttyS0] enabled [ 1.433423] console [ttyS0] enabled [ 1.440582] bootconsole [earlycon0] disabled [ 1.440582] bootconsole [earlycon0] disabled [ 1.450245] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 302, base_baud = 3000000) is a 8250 [ 1.459938] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 303, base_baud = 3000000) is a 8250 [ 1.470079] [drm] Initialized drm 1.1.0 20060810 [ 1.476850] OMAP DSS rev 6.1 [ 1.480613] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 1.489103] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops) [ 1.499517] connector-hdmi connector@1: failed to find video source [ 1.512310] loop: module loaded [ 1.516537] nand: No NAND device found [ 1.520308] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch [ 1.530316] m25p80 spi32766.0: s25fl256s1 (32768 Kbytes) [ 1.535732] 7 ofpart partitions found on MTD device spi32766.0 [ 1.541590] Creating 7 MTD partitions on "spi32766.0": [ 1.546766] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 1.552828] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 1.559157] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 1.566098] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 1.572735] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 1.580072] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 1.586367] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 1.594099] libphy: Fixed MDIO Bus: probed [ 1.643030] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 1.649153] davinci_mdio 48485000.mdio: detected phy mask fffffff3 [ 1.659611] libphy: 48485000.mdio: probed [ 1.663685] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver unknown [ 1.671725] davinci_mdio 48485000.mdio: phy[3]: device 48485000.mdio:03, driver unknown [ 1.680459] cpsw 48484000.ethernet: Detected MACID = a0:f6:fd:b3:4a:64 [ 1.687164] cpsw 48484000.ethernet: cpts: overflow check period 800 [ 1.694177] cpsw 48484000.ethernet: cpsw: Detected MACID = a0:f6:fd:b3:4a:65 [ 1.702875] mousedev: PS/2 mouse device common for all mice [ 2.025367] input: EP05120M09 as /devices/platform/44000000.ocp/48070000.i2c/i2c-0/0-0038/input/input0 [ 2.035379] i2c /dev entries driver [ 2.041095] tvp5158 1-0058: Camera sensor driver registered [ 2.047073] ov1063x 1-0037: Failed writing register 0x0103! [ 2.052681] ov1063x: probe of 1-0037 failed with error -121 [ 2.059068] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin [ 2.066171] vip 48970000.vip: loading firmware vpdma-1b8.bin [ 2.076656] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.082262] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 2.088816] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 2.095254] vpe 489d0000.vpe: Device registered as /dev/video0 [ 2.101141] vip 48970000.vip: VPDMA firmware loaded [ 2.106199] vip1-s0: Port A: Using subdev tvp5158 1-0058 for capture [ 2.112832] evm_3v3_sw: supplied by sysen1 [ 2.117042] vip1-s0: device registered as video1 [ 2.122097] vip1-s0: device registered as video2 [ 2.126899] vip1-s0: device registered as video3 [ 2.131673] vip1-s0: device registered as video4 [ 2.196794] mmc0: MAN_BKOPS_EN bit is not set [ 2.208687] mmc0: new HS200 MMC card at address 0001 [ 2.214156] mmcblk0: mmc0:0001 MMC08G 7.25 GiB [ 2.218938] mmcblk0boot0: mmc0:0001 MMC08G partition 1 8.00 MiB [ 2.225126] mmcblk0boot1: mmc0:0001 MMC08G partition 2 8.00 MiB [ 2.275392] ledtrig-cpu: registered to indicate activity on CPUs [ 2.286995] hwspinlock_user gatemp: requested 20 hwspinlocks [ 2.294023] aic_dvdd: supplied by evm_3v3_sw [ 2.300847] davinci-mcasp 48464000.mcasp: DAI is shared [ 2.307012] davinci-mcasp 48474000.mcasp: DAI is shared [ 2.312466] davinci-mcasp 4847c000.mcasp: invalid tdm slots: 0 [ 2.319590] omap-hdmi-audio omap-hdmi-audio.0.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok [ 2.330481] NET: Registered protocol family 10 [ 2.335777] sit: IPv6 over IPv4 tunneling driver [ 2.340968] NET: Registered protocol family 17 [ 2.345685] Key type dns_resolver registered [ 2.350133] omap_voltage_late_init: Voltage driver support not added [ 2.357061] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.363288] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.369979] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.376237] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.384566] Power Management for TI OMAP4+ devices. [ 2.389667] Registering SWP/SWPB emulation handler [ 2.395503] dmm 4e000000.dmm: workaround for errata i878 in use [ 2.402826] dmm 4e000000.dmm: initialized all PAT entries [ 2.409338] backlight supply power not found, using dummy regulator [ 2.417434] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.464185] asoc-simple-card sound0: tlv320aic3x-hifi <-> 48468000.mcasp mapping ok [ 2.475975] asoc-simple-card jamr3_sound: tlv320aic3x-hifi <-> 48474000.mcasp mapping ok [ 2.525813] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.532454] [drm] No driver support for vblank timestamp query. [ 2.546800] [drm] Enabling DMM ywrap scrolling [ 2.590105] mmc2: host does not support reading read-only switch, assuming write-enable [ 2.592061] mmc2: new high speed SDHC card at address 1234 [ 2.602530] mmcblk1: mmc2:1234 SA08G 7.21 GiB [ 2.603696] mmcblk1: p1 p2 [ 2.614000] Console: switching to colour frame buffer device 240x75 [ 2.655279] omapdrm omapdrm.0: fb0: omapdrm frame buffer device [ 2.683423] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 [ 2.690248] input: gpio_keys as /devices/platform/gpio_keys/input/input1 [ 2.697182] hctosys: unable to open rtc device (rtc0) [ 2.712838] evm_1v8: disabling [ 2.715942] aic_dvdd: disabling [ 2.719106] vmmcwl_fixed: disabling [ 2.722791] ldousb: disabling [ 2.726246] ALSA device list: [ 2.729224] #0: DRA7xx-EVM [ 2.732114] #1: HDMI 58040000.encoder [ 2.735983] #2: DRA7xx-JAMR3 [ 5.183389] EXT4-fs (mmcblk1p2): recovery complete [ 5.191942] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.200128] VFS: Mounted root (ext4 filesystem) on device 179:50. [ 5.208000] devtmpfs: mounted [ 5.211191] Freeing unused kernel memory: 340K [ 5.215672] This architecture does not have kernel memory protection. [ 5.428357] systemd[1]: System time before build time, advancing clock. [ 5.473754] random: systemd: uninitialized urandom read (16 bytes read, 29 bits of entropy available) [ 5.486680] random: systemd: uninitialized urandom read (16 bytes read, 29 bits of entropy available) [ 5.500619] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 5.519142] systemd[1]: Detected architecture arm. Welcome to Arago 2016.12! [ 5.548400] systemd[1]: Set hostname to . [ 5.619143] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 31 bits of entropy available) [ 5.638309] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 31 bits of entropy available) [ 5.648460] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 31 bits of entropy available) [ 5.669790] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 32 bits of entropy available) [ 5.681975] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 32 bits of entropy available) [ 5.782804] random: systemd: uninitialized urandom read (16 bytes read, 36 bits of entropy available) [ 5.792313] random: systemd: uninitialized urandom read (16 bytes read, 36 bits of entropy available) [ 5.802182] random: systemd: uninitialized urandom read (16 bytes read, 36 bits of entropy available) [ 6.159843] systemd[1]: sysinit.target: Found ordering cycle on sysinit.target/start [ 6.167725] systemd[1]: sysinit.target: Found dependency on alignment.service/start [ 6.175459] systemd[1]: sysinit.target: Found dependency on basic.target/start [ 6.182717] systemd[1]: sysinit.target: Found dependency on sysinit.target/start [ 6.190208] systemd[1]: sysinit.target: Breaking ordering cycle by deleting job alignment.service/start [ 6.199658] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with sysinit.target/start [ SKIP ] Ordering cycle found, skipping alignment.service [ 6.235709] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 6.263216] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 6.283263] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 6.304441] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 6.344856] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 6.373792] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 6.403253] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 6.423804] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 6.443300] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 6.463733] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 6.483266] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 6.503234] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 6.523323] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 6.553229] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 6.573342] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 6.623237] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 6.645716] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ 6.678085] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 6.692636] systemd[1]: Starting Journal Service... Starting Journal Service... [ 6.702081] CMEMK module: reference Linux version 4.4.84 [ 6.708259] no physical memory specified [ 6.712241] cmemk initialized [ 6.725568] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System...[ 6.733794] cryptodev: driver 1.8 loaded. [ 6.755473] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ 6.783368] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 6.803258] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 6.853232] systemd[1]: Mounting Temporary Directory... Mounting Temporary Directory... [ 6.885513] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 6.902599] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) [ 6.919829] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 6.943332] systemd[1]: Mounted Debug File System. [ OK ] Mounted Debug File System. [ 6.963228] systemd[1]: Mounted Temporary Directory. [ OK ] Mounted Temporary Directory. [ 6.983433] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started Load Kernel Modules. [ OK ] Started Setup Virtual Console. [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev... Starting Flush Journal to Persistent Storage... [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. [ 7.599455] systemd-journald[137]: Received request to flush runtime journal from PID 1 [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... Starting udev Kernel Device Manager... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started udev Kernel Device Manager. [ OK ] Started udev Coldplug all Devices. Starting Load/Save Random Seed... [ 8.023834] omap-rproc 58820000.ipu: assigned reserved memory node ipu1_cma@9d000000 [ 8.033109] remoteproc0: 58820000.ipu is available [ 8.038013] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 8.047685] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 8.059029] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 [ 8.067101] remoteproc1: 55020000.ipu is available [ 8.072620] remoteproc1: Note: remoteproc is still under development and considered experimental. [ OK ] Reached target Local File Systems. [ 8.083753] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 8.106421] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [ 8.129017] remoteproc2: 40800000.dsp is available [ 8.134743] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 8.145761] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 8.157512] omap-rproc 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000 [ 8.189175] remoteproc3: 41000000.dsp is available Starting Create Volatile Files and Directories... [ 8.205385] remoteproc3: Note: remoteproc is still under development and considered experimental. [ 8.222079] remoteproc3: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ OK ] Started Load/Save Random Seed. [ OK ] Found device /dev/ttyS0. [ 8.456374] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ OK ] Started Create Volatile Files and Directories. [ 8.508042] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 Starting Update UTMP about System Boot/Shutdown... Starting Network Time Synchronization... [ 8.589778] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc0 [ OK ] Started Update UTMP about System Boot/Shutdown. [ 8.910254] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 8.925287] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ OK ] Started Network Time Synchronization.[ 8.937930] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 8.947687] remoteproc1: registered virtio0 (type 7) [ 8.958237] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 Starting Synchronize System and HW clocks... [ OK ] Reached target System Time Synchronized. [ 9.085811] SCSI subsystem initialized [ 9.087644] remoteproc0: registered virtio1 (type 7) [ 9.089916] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 [ 9.101692] CAN device driver interface [ 9.264114] c_can_platform 4ae3c000.can: c_can_platform device registered (rgs=fce3c000, irq=365) [ OK ] Started Synchronize System and HW clocks. [ OK ] Reached target System Initialization. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ 9.406063] remoteproc2: registered virtio2 (type 7) [ OK ] Reached target Timers. [ 9.427295] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 9.449083] remoteproc3: registered virtio3 (type 7) [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.[ 9.459354] ahci 4a140000.sata: Enable 32-bit DMA instead of 64-bit. [ 9.479464] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ OK ] Listening on dropbear.socket.[ 9.510017] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System.[ 9.564126] scsi host0: ahci [ 9.575991] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 345 Starting Avahi mDNS/DNS-SD Stack... Starting Permit User Sessions... [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. Starting TI MultiCore Tools Daemon... Starting Print notice about GPLv3 packages... Starting Login Service... [ OK ] Started D-Bus System Message Bus. [ 9.963085] ata1: SATA link down (SStatus 0 SControl 300) [ 10.060301] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ 10.137054] NET: Registered protocol family 15 Starting Network Service... [ OK ] Started System Logging Service. [ OK ] Started Kernel Logging Service. Starting uim-sysfs.service... Starting Telephony service... Starting Save/Restore Sound Card State... [ OK ] Started Permit User Sessions. [FAILED] Failed to start TI MultiCore Tools Daemon. See 'systemctl status ti-mct-daemon.service' for details. [ OK ] Started Save/Restore Sound Card State. [ 10.507420] net eth1: initializing cpsw version 1.15 (0) [ OK ] Started Network Service. [ 10.532920] net eth0: initialized cpsw ale version 1.4 [ 10.555995] Initializing XFRM netlink socket [ 10.571024] net eth0: ALE Table size 1024 [ 10.580047] remoteproc1: powering up 55020000.ipu [ 10.619012] remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3743112 [ 10.659323] net eth1: phy found : id is : 0x20005c7a [ 10.675248] remoteproc1: remote processor 55020000.ipu is now up [ 10.687292] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 10.696391] Bluetooth: Core ver 2.21 [ 10.703309] NET: Registered protocol family 31 [ 10.711824] Bluetooth: HCI device and connection manager initialized [ 10.723352] virtio_rpmsg_bus virtio0: rpmsg host is online [ 10.728916] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x65 [ 10.739135] net eth0: initializing cpsw version 1.15 (0) [ 10.744910] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x66 [ 10.753086] Bluetooth: HCI socket layer initialized [ 10.767879] Bluetooth: L2CAP socket layer initialized [ 10.776063] remoteproc0: powering up 58820000.ipu [ 10.787242] net eth0: phy found : id is : 0x20005c7a [ 10.802255] random: nonblocking pool is initialized [ 10.807394] Bluetooth: SCO socket layer initialized [ 10.824823] remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 4794908 [ 10.836681] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.849448] omap-iommu 58882000.mmu: 58882000.mmu: version 2.1 [ 10.872728] remoteproc0: remote processor 58820000.ipu is now up [ 10.889717] virtio_rpmsg_bus virtio1: rpmsg host is online [ 10.895505] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x32 [ 10.907685] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x33 [ 10.943136] remoteproc2: powering up 40800000.dsp [ 10.953677] virtio_rpmsg_bus virtio1: creating channel rpmsg-omx addr 0x3c [ 10.971691] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x65 [ 10.979080] remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 5635840 [ 11.004102] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 11.009997] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 11.015947] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 11.108023] remoteproc2: remote processor 40800000.dsp is now up [ 11.135440] virtio_rpmsg_bus virtio2: rpmsg host is online [ 11.136282] virtio_rpmsg_bus virtio2: creating channel rpmsg-client-sample addr 0x32 [ 11.136636] virtio_rpmsg_bus virtio2: creating channel rpmsg-client-sample addr 0x33 [ 11.136754] virtio_rpmsg_bus virtio2: creating channel rpmsg-omx addr 0x3c [ 11.137122] virtio_rpmsg_bus virtio2: creating channel rpmsg-rpc addr 0x65 [ 11.239219] remoteproc3: powering up 41000000.dsp [ 11.266989] remoteproc3: Booting fw image dra7-dsp2-fw.xe66, size 5635844 [ 11.289980] omap_hwmod: mmu0_dsp2: _wait_target_disable failed [ 11.295880] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0 [ 11.301839] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0 [ 11.364351] remoteproc3: remote processor 41000000.dsp is now up [ 11.371646] virtio_rpmsg_bus virtio3: rpmsg host is online [ 11.377336] virtio_rpmsg_bus virtio3: creating channel rpmsg-client-sample addr 0x32 [ 11.393335] virtio_rpmsg_bus virtio3: creating channel rpmsg-client-sample addr 0x33 [ 11.414234] virtio_rpmsg_bus virtio3: creating channel rpmsg-omx addr 0x3c [ 11.440059] rpmsg_rpc rpmsg0: probing service dce-callback with src 1024 dst 101 [ 11.465796] virtio_rpmsg_bus virtio3: creating channel rpmsg-rpc addr 0x65 [ 11.491105] rpmsg_rpc rpmsg0: published functions = 4 [ 11.496393] rpmsg_rpc rpmsg1: probing service rpmsg-dce with src 1025 dst 102 [ 11.505698] rpmsg_rpc rpmsg13: probing service rpc_example_3 with src 1024 dst 101 [ 11.523422] rpmsg_rpc rpmsg5: probing service rpc_example_2 with src 1024 dst 101 [ 11.531114] rpmsg_rpc rpmsg1: published functions = 9 [ 11.539025] rpmsg_rpc rpmsg5: published functions = 8 [ 11.545447] rpmsg_rpc rpmsg9: probing service rpc_example_4 with src 1024 dst 101 [ 11.563173] rpmsg_rpc rpmsg13: published functions = 8 [ 11.574487] rpmsg_rpc rpmsg9: published functions = 8 [ 11.849921] usbcore: registered new interface driver usbfs [ 11.864329] usbcore: registered new interface driver hub [ 11.876867] usbcore: registered new device driver usb [ 11.902743] dwc3 48890000.usb: otg: primary host xhci-hcd.1.auto registered [ 11.917603] dwc3 48890000.usb: otg: shared host xhci-hcd.1.auto registered [ 11.934574] dwc3 48890000.usb: otg: can't start till gadget registers [ 11.951037] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 11.965277] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 [ 11.986960] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00210010 [ 12.010616] xhci-hcd xhci-hcd.2.auto: irq 511, io mem 0x488d0000 [ 12.029216] hub 1-0:1.0: USB hub found [ 12.040697] hub 1-0:1.0: 1 port detected [ 12.051241] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 12.067632] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 12.088253] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 12.111162] hub 2-0:1.0: USB hub found [ 12.123282] hub 2-0:1.0: 1 port detected [ OK ] Started Telephony service. [ OK ] Started Login Service. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Reached target Network. Starting Network Name Resolution... Starting Lightning Fast Webserver With Light System Requirements... [ OK ] Created slice system-systemd\x2dbacklight.slice. Starting Load/Save Screen Backlight...htness of backlight:backlight... [ OK ] Reached target Sound Card. [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Getty on tty1. [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started Load/Save Screen Backlight Brightness of backlight:backlight. [ OK ] Started Network Name Resolution. [ OK ] Started uim-sysfs.service. Starting rc.pvr.service... [ 12.749898] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [ OK ] Started rc.pvr.service. Starting weston.service... [ OK ] Started weston.service. Starting telnetd.service... Starting tiipclad-daemon.service... [ OK ] Started telnetd.service. [ OK ] Started tiipclad-daemon.service. Starting thttpd.service... *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf binutils-dev binutils bison-dev bison cpp-symlinks cpp dosfstools g++-symlinks g++ gawk-dev gawk gcc-symlinks gcc gdb gdbc6x gdbserver gstreamer1.0-libav libcairo-perf-utils libgmp10 libidn11 libmpc3 libmpfr4 m4-dev m4 make nettle parted swig-dev swig If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started thttpd.service. [ OK ] Started Print notice about GPLv3 packages. Starting rng-tools.service... [ OK ] Started rng-tools.service. Starting gdbserverproxy.service... [ OK ] Started gdbserverproxy.service. Starting matrix-gui-2.0.service... [ OK ] Started matrix-gui-2.0.service. Starting thermal-zone-init.service... [ OK ] Started thermal-zone-init.service. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dra7xx-evm ttyS0 Arago 2016.12 dra7xx-evm ttyS0 dra7xx-evm login: root root@dra7xx-evm:~# [ 22.120824] omap_hwmod: mmu1_dsp1: _wait_target_disable failed [ 22.133846] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 22.168904] omap_hwmod: mmu1_dsp2: _wait_target_disable failed [ 22.182697] omap_hwmod: mmu0_dsp2: _wait_target_disable failed root@dra7xx-evm:~# root@dra7xx-evm:~# root@dra7xx-evm:~# root@dra7xx-evm:~# root@dra7xx-evm:~# cat /sys/kernel/debug/remoteproc/remoteproc1/trace0 [0][ 0.000] 17 Resource entries at 0x3000 [0][ 0.000] Watchdog enabled: TimerBase = 0x6803e000 SMP-Core = 0 Freq = 20000000 [0][ 0.000] Watchdog enabled: TimerBase = 0x68036000 SMP-Core = 1 Freq = 20000000 [0][ 0.000] Watchdog_restore registered as a resume callback [0][ 0.000] IPU2 starting.. [0][ 0.000] [0][ 0.000] [0][ 0.000] **** IPUMM VERSION INFO **** [0][ 0.000] [0][ 0.000] Compile DATE Dec 28 2017 TIME 05:33:37 [0][ 0.000] GIT IPUMM [0][ 0.000] BRANCH : master [0][ 0.000] TAG : MMIP fatal: No annotated tags can describe '01bbb622267b687fa05e42062b146ad7a22e7afd'. IPC 3_47_00_00 [0][ 0.000] COMMIT-ID : 01bbb62 [0][ 0.000] CODEC-VER BEGIN: [0][ 0.000] H264D-02.00.21.01 [0][ 0.000] MPEG4D-01.00.15.01 [0][ 0.000] MPEG2D-01.00.17.01 [0][ 0.000] VC1D-01.00.02.05 [0][ 0.000] MJPEGD-01.00.16.01 [0][ 0.000] [0][ 0.000] H264E-02.00.09.01 [0][ 0.000] MPEG4E-01.00.02.01 [0][ 0.000] MJPEGE-01.00.17.01 [0][ 0.000] CODEC-VER END: [0][ 0.000] [0][ 0.000] ** IPUMM VERSION INFO END ** [0][ 0.000] Trace level PA 0x95f532ec Trace Level 0 [0][ 0.000] Trace Usage: level:[0-4: 0-no trace, 1-err, 2-debug, 3-info, 4-CE,FC,IPC traces] [0][ 0.000] [0][ 0.000] Trace Buffer PA 0x98a00000 kpi_control (PA 0x95f4f784 value 0x0) [1][ 0.000] OMAPRPC: registered channel: dce-callback [1][ 0.000] OMAPRPC: Returning Object @80209340 [1][ 0.000] loadTask: started [1][ 0.000] SLEEP_TICKS: 1000 [1][ 0.000] Load_hwiEnabled: 0 [1][ 0.000] Load_swiEnabled: 0 [1][ 0.000] Load_taskEnabled: 1 [1][ 0.000] Load_updateInIdle: 1 [1][ 0.000] Load_windowInMs: 11 [1][ 0.001] OMAPRPC: connecting from local endpoint 101 to port 101 [1][ 0.001] registering rpmsg-rpc:dce-callback service on 101 with HOST [1][ 0.001] OMAPRPC: started channel dce-callback on port: 101 [0][ 0.001] OMAPRPC: registered channel: rpmsg-dce [0][ 0.001] OMAPRPC: Returning Object @8020c3e0 [1][ 0.001] OMAPRPC: connecting from local endpoint 102 to port 102 [1][ 0.002] registering rpmsg-rpc:rpmsg-dce service on 102 with HOST [1][ 0.003] OMAPRPC: started channel rpmsg-dce on port: 102 [0][ 0.765] OMAPRPC: received msg type: 0 len: 8 from addr: 1024 [0][ 0.765] OMAPRPC: channel info query - name dce-callback fxns 4 [0][ 0.765] OMAPRPC: Replying with msg type: 1 to addr: 1024 from: 101 len: 12 [0][ 0.780] OMAPRPC: received msg type: 2 len: 216 from addr: 1024 [0][ 0.780] OMAPRPC: function query of type 1 [0][ 0.780] OMAPRPC: Replying with msg type: 3 to addr: 1024 from: 101 len: 216 [0][ 0.798] OMAPRPC: received msg type: 0 len: 8 from addr: 1025 [0][ 0.798] OMAPRPC: channel info query - name rpmsg-dce fxns 9 [0][ 0.798] OMAPRPC: Replying with msg type: 1 to addr: 1025 from: 102 len: 12 [0][ 0.805] OMAPRPC: received msg type: 2 len: 216 from addr: 1024 [0][ 0.806] OMAPRPC: function query of type 1 [0][ 0.806] OMAPRPC: Replying with msg type: 3 to addr: 1024 from: 101 len: 216 [0][ 0.812] OMAPRPC: received msg type: 2 len: 216 from addr: 1025 [1][ 0.812] OMAPRPC: received msg type: 2 len: 216 from addr: 1024 [1][ 0.813] OMAPRPC: function query of type 1 [0][ 0.813] OMAPRPC: function query of type 1 [1][ 0.813] OMAPRPC: Replying with msg type: 3 to addr: 1024 from: 101 len: 216 [0][ 0.813] OMAPRPC: Replying with msg type: 3 to addr: 1025 from: 102 len: 216 [0][ 0.813] OMAPRPC: received msg type: 2 len: 216 from addr: 1025 [1][ 0.813] OMAPRPC: received msg type: 2 len: 216 from addr: 1024 [0][ 0.813] OMAPRPC: function query of type 1 [1][ 0.813] OMAPRPC: function query of type 1 [0][ 0.813] OMAPRPC: Replying with msg type: 3 to addr: 1025 from: 102 len: 216 [1][ 0.813] OMAPRPC: Replying with msg type: 3 to addr: 1024 from: 101 len: 216 [0][ 0.837] OMAPRPC: received msg type: 2 len: 216 from addr: 1025 [0][ 0.838] OMAPRPC: function query of type 1 [0][ 0.838] OMAPRPC: Replying with msg type: 3 to addr: 1025 from: 102 len: 216 [0][ 0.843] OMAPRPC: received msg type: 2 len: 216 from addr: 1025 [0][ 0.843] OMAPRPC: function query of type 1 [0][ 0.843] OMAPRPC: Replying with msg type: 3 to addr: 1025 from: 102 len: 216 [0][ 0.845] OMAPRPC: received msg type: 2 len: 216 from addr: 1025 [0][ 0.845] OMAPRPC: function query of type 1 [0][ 0.845] OMAPRPC: Replying with msg type: 3 to addr: 1025 from: 102 len: 216 [0][ 0.849] OMAPRPC: received msg type: 2 len: 216 from addr: 1025 [0][ 0.849] OMAPRPC: function query of type 1 [0][ 0.849] OMAPRPC: Replying with msg type: 3 to addr: 1025 from: 102 len: 216 [0][ 0.855] OMAPRPC: received msg type: 2 len: 216 from addr: 1025 [0][ 0.855] OMAPRPC: function query of type 1 [0][ 0.855] OMAPRPC: Replying with msg type: 3 to addr: 1025 from: 102 len: 216 [0][ 0.880] OMAPRPC: received msg type: 2 len: 216 from addr: 1025 [0][ 0.880] OMAPRPC: function query of type 1 [0][ 0.880] OMAPRPC: Replying with msg type: 3 to addr: 1025 from: 102 len: 216 [0][ 0.881] OMAPRPC: received msg type: 2 len: 216 from addr: 1025 [0][ 0.881] OMAPRPC: function query of type 1 [0][ 0.881] OMAPRPC: Replying with msg type: 3 to addr: 1025 from: 102 len: 216 root@dra7xx-evm:~# root@dra7xx-evm:~# root@dra7xx-evm:~# root@dra7xx-evm:~# dmesg | grep late-attach root@dra7xx-evm:~#