/etc/init.d/weston stop Stopping Weston root@dra7xx-evm:~# /etc/init.d/weston stop  at rt 78root@dra7xx-evm:~# /etc/init.d/weston start            matrix-gui-2.0 start /home/root Removing stale PID file /var/run/matrix-gui-2.0.pid. Starting Matrix GUI application. root@dra7xx-evm:~# U-Boot SPL 2016.05-g88cb4f3898 (Jul 19 2016 - 23:39:40) DRA752-GP ES2.0 MMC Device 1 not found *** Warning - No MMC card found, using default environment Trying to boot from MMC1 MMC Device 1 not found *** Warning - No MMC card found, using default environment reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2016.05-g88cb4f3898 (Jul 19 2016 - 23:39:40 +0530) CPU : DRA752-GP ES2.0 Model: TI DRA742 Board: DRA74x EVM REV H.0 I2C: ready DRAM: 4 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Warning - MMC init failed, using default environment ERROR: invalid mmc device at arch/arm/cpu/armv7/omap-common/utils.c:189/mmc_get_part_size() Warning: fastboot.userdata_size: unable to calc SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: Warning: ethernet@48484000 using MAC address from ROM eth0: ethernet@48484000 Hit any key to stop autoboot: 2  1  0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 252 bytes read in 3 ms (82 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 3605680 bytes read in 302 ms (11.4 MiB/s) 109508 bytes read in 205 ms (521.5 KiB/s) Booting from mmc0 ... Kernel image @ 0x82000000 [ 0x000000 - 0x3704b0 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe2000, end 8ffffbc3 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.14-g2cbc3a70eb (services@swubn04) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 SMP PREEMPT Tue Jul 19 21:00:03 IST 2016 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA742 [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB [ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB [ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 32 MiB [ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009f000000, size 8 MiB [ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 64 MiB at 0x00000000fb000000 [ 0.000000] Forcing write-allocate cache policy for SMP [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x000000027fd00000 to fe600000 for dram barrier [ 0.000000] DRA752 ES2.0 [ 0.000000] PERCPU: Embedded 11 pages/cpu @eb724000 s14848 r8192 d22016 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040704 [ 0.000000] Kernel command line: console=ttyO0,115200n8 elevator=noop root=PARTUUID=d0c9f4ae-02 rw rootwait earlyprintk fixrtc omapdrm.num_crtc=2 consoleblank=0 cma=64M rootfstype=ext4 snd.slots_reserved=1,1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 3891772K/4169728K available (6567K kernel code, 369K rwdata, 2536K rodata, 332K init, 289K bss, 48580K reserved, 229376K cma-reserved, 3321856K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08ec04c (9105 kB) [ 0.000000] .init : 0xc08ed000 - 0xc0940000 ( 332 kB) [ 0.000000] .data : 0xc0940000 - 0xc099c5c8 ( 370 kB) [ 0.000000] .bss : 0xc099e000 - 0xc09e6640 ( 290 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] Architected cp15 timer(s) running at 6.14MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000004] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.008307] Switching to timer-based delay loop, resolution 162ns [ 0.014960] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.025221] OMAP clocksource: 32k_counter at 32768 Hz [ 0.030947] Console: colour dummy device 80x30 [ 0.035602] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.042396] This ensures that you still see kernel messages. Please [ 0.048909] update your kernel commandline. [ 0.053302] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.063939] pid_max: default: 32768 minimum: 301 [ 0.068850] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.075737] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.083584] Initializing cgroup subsys io [ 0.087808] Initializing cgroup subsys memory [ 0.092378] Initializing cgroup subsys devices [ 0.097025] Initializing cgroup subsys freezer [ 0.101687] Initializing cgroup subsys perf_event [ 0.106604] Initializing cgroup subsys pids [ 0.110997] CPU: Testing write buffer coherency: ok [ 0.116289] /cpus/cpu@0 missing clock-frequency property [ 0.121833] /cpus/cpu@1 missing clock-frequency property [ 0.127388] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.133307] Setting up static identity map for 0x80008380 - 0x800083d8 [ 0.220407] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.220468] Brought up 2 CPUs [ 0.229487] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.235928] CPU: All CPU(s) started in SVC mode. [ 0.241117] devtmpfs: initialized [ 0.271746] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.280647] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.493406] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.508180] pinctrl core: initialized pinctrl subsystem [ 0.514495] NET: Registered protocol family 16 [ 0.520106] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.557332] cpuidle: using governor ladder [ 0.587365] cpuidle: using governor menu [ 0.600244] OMAP GPIO hardware version 0.1 [ 0.608611] GPIO line 161 (radio_rst) hogged as output/low [ 0.616626] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.640516] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.645898] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.664361] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.672678] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.679213] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.686905] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.695165] OMAP DMA hardware revision 0.0 [ 0.733693] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.742106] edma 43300000.edma: memcpy is disabled [ 0.751745] edma 43300000.edma: TI EDMA DMA engine driver [ 0.761488] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.767566] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.773626] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.779666] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.785849] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.791932] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.801255] palmas 0-0058: IRQ missing: skipping irq request [ 0.818192] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0 [ 0.890438] pcf857x 0-0020: probed [ 0.894551] pcf857x 0-0021: probed [ 0.898828] pcf857x 0-0027: probed [ 0.902543] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.928631] GPIO line 447 (vin6_sel_s0) hogged as output/low [ 0.934618] pcf857x 1-0026: probed [ 0.938894] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz [ 0.945063] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 0.971113] pcf857x 3-0021: probed [ 0.974710] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz [ 0.980731] media: Linux media interface: v0.10 [ 0.985536] Linux video capture interface: v2.00 [ 0.990401] pps_core: LinuxPPS API ver. 1 registered [ 0.995594] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.005071] PTP clock support registered [ 1.009217] EDAC MC: Ver: 3.0.0 [ 1.013276] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 1.019923] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 1.026600] Advanced Linux Sound Architecture Driver Initialized. [ 1.033842] clocksource: Switched to clocksource arch_sys_counter [ 1.050616] NET: Registered protocol family 2 [ 1.055672] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.063047] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.069878] TCP: Hash tables configured (established 8192 bind 8192) [ 1.076540] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.082723] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.089484] NET: Registered protocol family 1 [ 1.094308] RPC: Registered named UNIX socket transport module. [ 1.100469] RPC: Registered udp transport module. [ 1.105398] RPC: Registered tcp transport module. [ 1.110309] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.118109] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 1.128746] futex hash table entries: 512 (order: 3, 32768 bytes) [ 1.142607] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.149401] NFS: Registering the id_resolver key type [ 1.154709] Key type id_resolver registered [ 1.159086] Key type id_legacy registered [ 1.163343] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.169949] bounce: pool size: 64 pages [ 1.174161] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.181842] io scheduler noop registered (default) [ 1.186890] io scheduler deadline registered [ 1.191384] io scheduler cfq registered [ 1.200380] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 1.210876] PCI host bridge /ocp/axi@0/pcie@51000000 ranges: [ 1.216817] No bus range found for /ocp/axi@0/pcie@51000000, using [bus 00-ff] [ 1.224548] IO 0x20003000..0x20012fff -> 0x00000000 [ 1.229920] MEM 0x20013000..0x2fffffff -> 0x20013000 [ 1.268094] dra7-pcie 51000000.pcie: link is not up [ 1.273346] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00 [ 1.279888] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.285622] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.292052] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 1.299597] PCI: bus0: Fast back to back transfers disabled [ 1.305527] PCI: bus1: Fast back to back transfers enabled [ 1.311284] irq: no irq domain found for /ocp/axi@0/pcie@51000000/interrupt-controller ! [ 1.319714] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 1.326788] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 1.333860] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.339253] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 1.347836] led-backlight backlight: failed to parse DT data [ 1.376554] fpd3_serdes: probe of 7-002c failed with error -5 [ 1.382557] fpd3_serdes 1-001b: Serializer fpd3_24b_ser ready [ 1.390104] fpd3_serdes 7-002c: Deserializer fpd3_24b_des ready [ 1.455902] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 1.466020] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 301, base_baud = 3000000) is a 8250 [ 1.475240] console [ttyS0] enabled [ 1.475240] console [ttyS0] enabled [ 1.482401] bootconsole [earlycon0] disabled [ 1.482401] bootconsole [earlycon0] disabled [ 1.492061] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 302, base_baud = 3000000) is a 8250 [ 1.501765] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 303, base_baud = 3000000) is a 8250 [ 1.511868] [drm] Initialized drm 1.1.0 20060810 [ 1.518564] OMAP DSS rev 6.1 [ 1.522336] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 1.530806] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops) [ 1.541191] connector-hdmi connector@1: failed to find video source [ 1.547926] tlc59108 0-0040: failed to find video source [ 1.553271] tlc59108: probe of 0-0040 failed with error -22 [ 1.564926] loop: module loaded [ 1.568227] i2c i2c-7: Cannot translate chip addr 0x69 [ 1.574294] nand: No NAND device found [ 1.578063] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch [ 1.587967] m25p80 spi32766.0: s25fl256s1 (32768 Kbytes) [ 1.593363] 7 ofpart partitions found on MTD device spi32766.0 [ 1.599243] Creating 7 MTD partitions on "spi32766.0": [ 1.604421] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 1.610451] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 1.616731] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 1.623614] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 1.630256] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 1.637599] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 1.643886] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 1.651594] libphy: Fixed MDIO Bus: probed [ 1.703876] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 1.710001] davinci_mdio 48485000.mdio: detected phy mask fffffff3 [ 1.720308] libphy: 48485000.mdio: probed [ 1.724379] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver unknown [ 1.732420] davinci_mdio 48485000.mdio: phy[3]: device 48485000.mdio:03, driver unknown [ 1.741146] cpsw 48484000.ethernet: Detected MACID = a0:f6:fd:b3:cb:80 [ 1.748451] cpsw 48484000.ethernet: cpsw: Detected MACID = a0:f6:fd:b3:cb:81 [ 1.757175] mousedev: PS/2 mouse device common for all mice [ 2.076170] input: EP05120M09 as /devices/platform/44000000.ocp/48070000.i2c/i2c-0/0-0038/input/input0 [ 2.086110] i2c /dev entries driver [ 2.091930] tvp5158 1-0058: Camera sensor driver registered [ 2.097909] ov1063x 1-0037: Failed writing register 0x0103! [ 2.103518] ov1063x: probe of 1-0037 failed with error -121 [ 2.109920] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin [ 2.116997] vip 48970000.vip: loading firmware vpdma-1b8.bin [ 2.123403] i2c i2c-7: Cannot translate chip addr 0x18 [ 2.128628] i2c i2c-7: Cannot translate chip addr 0x19 [ 2.133793] i2c i2c-7: Cannot translate chip addr 0x1a [ 2.139093] i2c i2c-7: Cannot translate chip addr 0x29 [ 2.144312] vpe 489d0000.vpe: Device registered as /dev/video0 [ 2.150185] vip 48970000.vip: VPDMA firmware loaded [ 2.155225] vip1-s0: Port A: Using subdev tvp5158 1-0058 for capture [ 2.161773] i2c i2c-7: Cannot translate chip addr 0x2a [ 2.166959] i2c i2c-7: Cannot translate chip addr 0x2b [ 2.172122] i2c i2c-7: Cannot translate chip addr 0x48 [ 2.177316] vip1-s0: device registered as video1 [ 2.182059] i2c i2c-7: Cannot translate chip addr 0x49 [ 2.187257] vip1-s0: device registered as video2 [ 2.192006] i2c i2c-7: Cannot translate chip addr 0x4a [ 2.197205] vip1-s0: device registered as video3 [ 2.201949] i2c i2c-7: Cannot translate chip addr 0x4b [ 2.207159] vip1-s0: device registered as video4 [ 2.211821] i2c i2c-7: Cannot translate chip addr 0x4c [ 2.217000] i2c i2c-7: Cannot translate chip addr 0x4d [ 2.222161] i2c i2c-7: Cannot translate chip addr 0x4e [ 2.227337] i2c i2c-7: Cannot translate chip addr 0x4f [ 2.232567] i2c i2c-7: Cannot translate chip addr 0x18 [ 2.237747] i2c i2c-7: Cannot translate chip addr 0x19 [ 2.242911] i2c i2c-7: Cannot translate chip addr 0x29 [ 2.248089] i2c i2c-7: Cannot translate chip addr 0x4c [ 2.253251] i2c i2c-7: Cannot translate chip addr 0x4d [ 2.261522] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.294490] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 2.300875] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 2.307428] evm_3v3_sw: supplied by sysen1 [ 2.476015] ledtrig-cpu: registered to indicate activity on CPUs [ 2.494756] hwspinlock_user gatemp: requested 10 hwspinlocks [ 2.501694] aic_dvdd: supplied by evm_3v3_sw [ 2.508498] davinci-mcasp 48464000.mcasp: DAI is shared [ 2.514610] davinci-mcasp 48474000.mcasp: DAI is shared [ 2.520058] davinci-mcasp 4847c000.mcasp: invalid tdm slots: 0 [ 2.527133] omap-hdmi-audio omap-hdmi-audio.0.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok [ 2.548018] NET: Registered protocol family 10 [ 2.563335] sit: IPv6 over IPv4 tunneling driver [ 2.568518] NET: Registered protocol family 17 [ 2.573205] Key type dns_resolver registered [ 2.577677] omap_voltage_late_init: Voltage driver support not added [ 2.584582] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.590792] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.597505] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.603714] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.611914] Power Management for TI OMAP4+ devices. [ 2.617023] Registering SWP/SWPB emulation handler [ 2.623864] dmm 4e000000.dmm: initialized all PAT entries [ 2.640296] backlight supply power not found, using dummy regulator [ 2.649120] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.695042] asoc-simple-card sound@0: tlv320aic3x-hifi <-> 48468000.mcasp mapping ok [ 2.715350] asoc-simple-card jamr3_sound: tlv320aic3x-hifi <-> 48474000.mcasp mapping ok [ 2.723493] asoc-simple-card jamr3_sound: ASoC: no source widget found for LLOUT [ 2.730947] asoc-simple-card jamr3_sound: ASoC: Failed to add route LLOUT -> direct -> Line Out [ 2.739706] asoc-simple-card jamr3_sound: ASoC: no source widget found for RLOUT [ 2.747150] asoc-simple-card jamr3_sound: ASoC: Failed to add route RLOUT -> direct -> Line Out [ 2.747156] mmc0: MAN_BKOPS_EN bit is not set [ 2.761051] asoc-simple-card jamr3_sound: ASoC: no sink widget found for LINE1L [ 2.768411] asoc-simple-card jamr3_sound: ASoC: Failed to add route Line In -> direct -> LINE1L [ 2.777161] asoc-simple-card jamr3_sound: ASoC: no sink widget found for LINE1R [ 2.784515] asoc-simple-card jamr3_sound: ASoC: Failed to add route Line In -> direct -> LINE1R [ 2.823560] mmc0: new HS200 MMC card at address 0001 [ 2.829211] mmcblk0: mmc0:0001 MMC08G 7.25 GiB [ 2.833914] mmcblk0boot0: mmc0:0001 MMC08G partition 1 8.00 MiB [ 2.839985] mmcblk0boot1: mmc0:0001 MMC08G partition 2 8.00 MiB [ 2.855655] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.862331] [drm] No driver support for vblank timestamp query. [ 2.876814] [drm] Enabling DMM ywrap scrolling [ 2.940274] Console: switching to colour frame buffer device 240x75 [ 2.959457] omapdrm omapdrm.0: fb0: omapdrm frame buffer device [ 3.004086] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 [ 3.010943] input: gpio_keys as /devices/platform/gpio_keys/input/input1 [ 3.017866] hctosys: unable to open rtc device (rtc0) [ 3.029901] mmc2: host does not support reading read-only switch, assuming write-enable [ 3.039520] aic_dvdd: disabling [ 3.042672] vmmcwl_fixed: disabling [ 3.046371] ldousb: disabling [ 3.049797] ALSA device list: [ 3.052830] mmc2: new ultra high speed DDR50 SDHC card at address 0007 [ 3.059401] #0: DRA7xx-EVM [ 3.062288] #1: HDMI 58040000.encoder [ 3.066669] #2: DRA7xx-JAMR3 [ 3.069884] mmcblk1: mmc2:0007 SD8GB 7.42 GiB [ 3.076246] mmcblk1: p1 p2 [ 4.500820] EXT4-fs (mmcblk1p2): recovery complete [ 4.510455] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.518631] VFS: Mounted root (ext4 filesystem) on device 179:50. [ 4.527412] devtmpfs: mounted [ 4.530598] Freeing unused kernel memory: 332K (c08ed000 - c0940000) [ 4.536997] This architecture does not have kernel memory protection. [ 4.774325] systemd[1]: System time before build time, advancing clock. [ 4.821662] random: systemd urandom read with 26 bits of entropy available [ 4.837403] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 4.855917] systemd[1]: Detected architecture arm. Welcome to Arago 2016.07! [ 4.885408] systemd[1]: Set hostname to . [ 5.478206] systemd[1]: sysinit.target: Found ordering cycle on sysinit.target/start [ 5.486040] systemd[1]: sysinit.target: Found dependency on alignment.service/start [ 5.493736] systemd[1]: sysinit.target: Found dependency on sysinit.target/start [ 5.501188] systemd[1]: sysinit.target: Breaking ordering cycle by deleting job alignment.service/start [ 5.510672] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with sysinit.target/start [ SKIP ] Ordering cycle found, skipping alignment.service [ 5.547567] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 5.564176] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 5.614312] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 5.643075] CMEMK module: reference Linux version 4.4.14 [ 5.649031] allocated heap buffer 0x95400000 of size 0x298000 [ 5.654922] cmemk initialized [ 5.657361] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 5.674041] cryptodev: driver 1.8 loaded. [ 5.684787] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.716119] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ 5.744242] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 5.774636] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.804038] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.824611] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.894045] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 5.924266] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 5.957399] systemd[1]: Mounting Temporary Directory... Mounting Temporary Directory... [ 5.984078] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 6.004317] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 6.034025] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 6.064010] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 6.134163] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 6.150464] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) [ 6.166490] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ 6.204073] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 6.224193] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 6.244119] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 6.304271] systemd[1]: Starting Journal Service... Starting Journal Service... [ 6.334256] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 6.364404] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 6.428647] systemd[1]: Mounted Debug File System. [ OK ] Mounted Debug File System. [ 6.454191] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 6.484113] systemd[1]: Mounted Temporary Directory. [ OK ] Mounted Temporary Directory. [ 6.504248] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Started Load Kernel Modules. [ OK ] Started Setup Virtual Console. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Create list of required sta...ce nodes for the current kernel. Starting Create Static Device Nodes in /dev... Starting udev Coldplug all Devices... Starting Apply Kernel Variables... Starting Flush Journal to Persistent Storage... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Apply Kernel Variables. [ 7.131070] systemd-journald[163]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Reached target Local File Systems (Pre). Mounting /var/volatile... Mounting /media/ram... Starting udev Kernel Device Manager... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. [ OK ] Started udev Coldplug all Devices. [ 7.535282] omap-rproc 58820000.ipu: assigned reserved memory node ipu1_cma@9d000000 [ 7.543117] remoteproc0: 58820000.ipu is available [ 7.563426] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 7.574242] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 7.597996] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 Starting Load/Save Random Seed... [ 7.630867] remoteproc1: 55020000.ipu is available [ OK ] Reached target Local File Systems. [ 7.647982] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 7.669696] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 7.692661] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 Starting Create Volatile Files and Directories... [ 7.730223] remoteproc2: 40800000.dsp is available [ 7.746153] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 7.775236] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 7.795547] omap-rproc 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000 [ 7.806094] remoteproc3: 41000000.dsp is available [ OK ] Started Load/Save Random Seed.[ 7.816688] remoteproc3: Note: remoteproc is still under development and considered experimental. [ 7.843051] remoteproc3: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ OK ] Started Create Volatile Files and Directories.[ 7.920705] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ OK ] Found device /dev/ttyS0. [ 8.028997] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 Starting Update UTMP about System Boot/Shutdown...[ 8.042794] alg: skcipher: setkey failed on test 5 for ecb-des-omap: flags=100 [ 8.068128] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-omap: flags=100 [ 8.080071] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-omap: flags=100 [ 8.101806] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc0 Starting Network Time Synchronization... [ OK ] Started Update UTMP about System Boot/Shutdown. [ 8.326519] remoteproc1: registered virtio0 (type 7) [ 8.332930] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 8.341135] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 8.349583] remoteproc0: registered virtio1 (type 7) [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ 8.448244] SCSI subsystem initialized [ 8.455982] CAN device driver interface Starting Synchronize System and HW clocks... [ OK ] Started Synchronize System and HW clocks. [ OK ] Reached target System Initialization. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on RPCbind Server Activation Socket. [ 8.796957] remoteproc3: registered virtio2 (type 7) [ OK ] Listening on dropbear.socket. [ 8.826896] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ 8.910881] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 Starting Telephony service... [ 8.924750] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=361) Starting Permit User Sessions... [ 8.953109] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 8.965474] ahci 4a140000.sata: Enable 32-bit DMA instead of 64-bit. Starting Print notice about GPLv3 packages... [ 8.993076] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 9.022782] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ OK ] Started System Logging Service. [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. [ OK ] Started Kernel Logging Service.[ 9.066879] scsi host0: ahci Starting Avahi mDNS/DNS-SD Stack... Starting uim-sysfs.service...[ 9.091132] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 341 [ OK ] Started D-Bus System Message Bus. [ 9.168118] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 [ 9.473920] ata1: SATA link down (SStatus 0 SControl 300) [ 10.004727] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Telephony service. Starting Network Service... Starting Login Service... [ 10.111367] remoteproc2: registered virtio3 (type 7) Starting Save/Restore Sound Card State... [ OK ] Started Permit User Sessions. [ 10.273410] Bluetooth: Core ver 2.21 [ 10.285568] NET: Registered protocol family 31 [ OK ] Started Save/Restore Sound Card State. [ 10.304607] remoteproc1: powering up 55020000.ipu [ 10.314776] Bluetooth: HCI device and connection manager initialized [ 10.336313] Bluetooth: HCI socket layer initialized [ 10.343639] remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3497312 [ 10.346074] Bluetooth: L2CAP socket layer initialized [ 10.346105] Bluetooth: SCO socket layer initialized [ 10.366621] NET: Registered protocol family 15 [ 10.384590] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ 10.401269] net eth1: initializing cpsw version 1.15 (0) [ OK ] Started Network Service. [ 10.444383] net eth0: initialized cpsw ale version 1.4 [ 10.476575] random: nonblocking pool is initialized [ 10.536754] remoteproc1: remote processor 55020000.ipu is now up [ 10.555797] virtio_rpmsg_bus virtio0: rpmsg host is online [ 10.558916] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x65 [ 10.559431] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x66 [ 10.577607] net eth1: phy found : id is : 0x20005c7a [ 10.599564] Initializing XFRM netlink socket [ 10.610476] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 10.620295] remoteproc0: powering up 58820000.ipu [ 10.644766] net eth0: initializing cpsw version 1.15 (0) [ 10.655890] remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 4948076 [ 10.673777] omap-iommu 58882000.mmu: 58882000.mmu: version 2.1 [ 10.698054] remoteproc0: remote processor 58820000.ipu is now up [ 10.718497] virtio_rpmsg_bus virtio1: rpmsg host is online [ 10.719834] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x32 [ 10.719984] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x33 [ 10.720418] virtio_rpmsg_bus virtio1: creating channel rpmsg-omx addr 0x3c [ 10.720522] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x65 [ 10.777809] net eth0: phy found : id is : 0x20005c7a [ 10.787939] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.807316] remoteproc3: powering up 41000000.dsp [ 10.842276] remoteproc3: Booting fw image dra7-dsp2-fw.xe66, size 5758304 [ 10.881573] omap_hwmod: mmu0_dsp2: _wait_target_disable failed [ 10.887472] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0 [ 10.893409] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0 [ 10.952457] remoteproc3: remote processor 41000000.dsp is now up [ 10.970536] virtio_rpmsg_bus virtio2: rpmsg host is online [ 10.971171] virtio_rpmsg_bus virtio2: creating channel rpmsg-client-sample addr 0x32 [ 10.971312] virtio_rpmsg_bus virtio2: creating channel rpmsg-client-sample addr 0x33 [ 10.971420] virtio_rpmsg_bus virtio2: creating channel rpmsg-omx addr 0x3c [ 10.971521] virtio_rpmsg_bus virtio2: creating channel rpmsg-rpc addr 0x65 [ 11.057904] remoteproc2: powering up 40800000.dsp [ 11.140421] remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 24034716 [ 11.167420] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 11.173309] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 11.179228] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 11.330670] remoteproc2: remote processor 40800000.dsp is now up [ 11.358692] virtio_rpmsg_bus virtio3: rpmsg host is online [ 11.377122] virtio_rpmsg_bus virtio3: creating channel rpmsg-proto addr 0x3d [ 11.418309] NET: Registered protocol family 41 [ 11.437875] rpmsg_rpc rpmsg0: probing service dce-callback with src 1024 dst 101 [ 11.458773] usbcore: registered new interface driver usbfs [ 11.464848] rpmsg_rpc rpmsg1: probing service rpmsg-dce with src 1025 dst 102 [ 11.472187] rpmsg_rpc rpmsg0: published functions = 4 [ 11.478953] usbcore: registered new interface driver hub [ 11.488239] rpmsg_rpc rpmsg5: probing service rpc_example_2 with src 1024 dst 101 [ 11.494920] usbcore: registered new device driver usb [ 11.501161] rpmsg_rpc rpmsg1: published functions = 9 [ 11.516209] dwc3 48890000.usb: otg: primary host xhci-hcd.1.auto registered [ 11.523207] dwc3 48890000.usb: otg: shared host xhci-hcd.1.auto registered [ 11.538171] rpmsg_rpc rpmsg9: probing service rpc_example_3 with src 1024 dst 101 [ 11.545810] rpmsg_rpc rpmsg5: published functions = 8 [ 11.561565] dwc3 48890000.usb: otg: can't start till gadget registers [ 11.582952] rpmsg_rpc rpmsg9: published functions = 8 [ 11.596428] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 11.624249] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 [ 11.643252] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 11.666159] xhci-hcd xhci-hcd.2.auto: irq 506, io mem 0x488d0000 [ 11.689777] hub 1-0:1.0: USB hub found [ 11.703529] hub 1-0:1.0: 1 port detected [ 11.713206] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 11.728769] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 11.747786] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 11.766846] hub 2-0:1.0: USB hub found [ 11.781904] hub 2-0:1.0: 1 port detected [ OK ] Started uim-sysfs.service. [ OK ] Started Login Service. Starting rc.pvr.service... [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Created slice system-systemd\x2dbacklight.slice. Starting Load/Save Screen Backlight...htness of backlight:backlight... [ OK ] Reached target Sound Card. [ OK ] Reached target Network. Starting Network Name Resolution... Starting Lightning Fast Webserver With Light System Requirements... [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Getty on tty1. [ OK ] Started Load/Save Screen Backlight Brightness of backlight:backlight. [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started Network Name Resolution. [ 12.123335] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [ OK ] Started rc.pvr.service. Starting weston.service... [ OK ] Started weston.service. Starting tiipclad-daemon.service... Starting telnetd.service... [ OK ] Started telnetd.service. [ OK ] Started tiipclad-daemon.service. Starting thttpd.service... Starting S96StartRadio.service... [ OK ] Started S96StartRadio.service. [ OK ] Started thttpd.service. Starting rng-tools.service... [ OK ] Started rng-tools.service. Starting gdbserverproxy.service... [ 12.581676] cpsw 48484000.ethernet eth1: Link is Up - 100Mbps/Full - flow control rx/tx [ 12.593496] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf binutils-dev binutils bison-dev bison cpp-symlinks cpp dosfstools g++-symlinks g++ gawk-dev gawk gcc-symlinks gcc gdb gdbc6x gdbserver gstreamer1.0-libav libgmp10 libidn11 libmpc3 libmpfr4 make nettle parted swig-dev swig If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. [ OK ] Started gdbserverproxy.service. Starting matrix-gui-2.0.service... [ OK ] Started matrix-gui-2.0.service. Starting thermal-zone-init.service... [ OK ] Started thermal-zone-init.service. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dra7xx-evm ttyS0 Arago 2016.07 dra7xx-evm ttyS0 dra7xx-evm login: [ 22.133023] omap_hwmod: mmu1_dsp2: _wait_target_disable failed [ 22.147217] omap_hwmod: mmu0_dsp2: _wait_target_disable failed