U-Boot SPL 2019.01-g53bf205-dirty (Aug 02 2019 - 10:40:31 +0530) SYSFW ABI: 2.6 (firmware rev 0x0013 '19.4.1-v2019.04a (Curious Crow)') Trying to boot from MMC1 Starting ATF on ARM64 core... NOTICE: BL31: v2.1(release):ti2019.01-rc2 NOTICE: BL31: Built : 05:14:07, Jul 7 2019 I/TC: I/TC: OP-TEE version: 3.2.0-583-g251f7c6-dev #1 Sun Jul 7 05:14:17 UTC 2019 aarch64 I/TC: Initialized U-Boot SPL 2019.01-g53bf205-dirty (Aug 02 2019 - 11:47:58 +0530) Trying to boot from MMC1 U-Boot 2019.01-g53bf205-dirty (Aug 02 2019 - 11:47:58 +0530) Model: Texas Instruments AM654 Base Board DRAM: 4 GiB MMC: sdhci@4f80000: 0, sdhci@04FA0000: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: eth0: cpsw_nuss@046000000, eth1: pruss2_eth Hit any key to stop autoboot: 2  1  0 switch to partitions #0, OK mmc1 is current device SD/MMC found on device 1 ** Unable to read file boot.scr ** 1490 bytes read in 4 ms (363.3 KiB/s) Loaded env from uEnv.txt Importing environment from mmc1 ... Running uenvcmd ... 1 bytes read in 7 ms (0 Bytes/s) Already setup. 12632072 bytes read in 1069 ms (11.3 MiB/s) 71809 bytes read in 12 ms (5.7 MiB/s) ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 00000000fddb8000, end 00000000fdeccfff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 4.19.38-g4dae378bbe (oe-user@oe-host) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #1 SMP PREEMPT Mon Aug 12 05:54:05 UTC 2019 [ 0.000000] Machine model: Texas Instruments AM654 Base Board [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [ 0.000000] bootconsole [ns16550a0] enabled [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009b000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9b000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009b100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@9b100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9c000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c100000, size 7 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@9c100000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 512 MiB at 0x00000000c0000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x3e4 with crng_init=0 [ 0.000000] percpu: Embedded 2 pages/cpu s48536 r8192 d74344 u131072 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64704 [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),128k(ospi.env),128k(ospi.env.backup),1m(ospi.sysfw),-@8m(ospi.rootfs) root=PARTUUID=c961aa59-02 rw rootfstype=ext4 rootwait [ 0.000000] Dentry cache hash table entries: 524288 (order: 6, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 5, 2097152 bytes) [ 0.000000] software IO TLB: mapped [mem 0xf9db0000-0xfddb0000] (64MB) [ 0.000000] Memory: 3529856K/4145152K available (8062K kernel code, 752K rwdata, 2880K rodata, 576K init, 614K bss, 91008K reserved, 524288K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: no VLPI support, no direct LPI support [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [ 0.000000] ITS@0x0000000001820000: allocated 1048576 Devices @8c0800000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GIC: using LPI property table @0x00000008c00c0000 [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [ 0.000000] CPU0: using LPI pending table @0x00000008c00d0000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [ 0.000005] sched_clock: 56 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [ 0.008678] Console: colour dummy device 80x25 [ 0.013275] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) [ 0.023967] pid_max: default: 32768 minimum: 301 [ 0.028795] Security Framework initialized [ 0.033056] Mount-cache hash table entries: 8192 (order: 0, 65536 bytes) [ 0.039939] Mountpoint-cache hash table entries: 8192 (order: 0, 65536 bytes) [ 0.071377] ASID allocator initialised with 32768 entries [ 0.084942] rcu: Hierarchical SRCU implementation. [ 0.098004] Platform MSI: gic-its@18200000 domain created [ 0.103813] PCI/MSI: /interconnect@100000/interrupt-controller@1800000/gic-its@18200000 domain created [ 0.121377] smp: Bringing up secondary CPUs ... [ 0.158504] Detected VIPT I-cache on CPU1 [ 0.158541] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [ 0.158601] CPU1: using LPI pending table @0x00000008c0330000 [ 0.158645] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.220195] Detected VIPT I-cache on CPU2 [ 0.220238] GICv3: CPU2: found redistributor 100 region 0:0x00000000018c0000 [ 0.220299] CPU2: using LPI pending table @0x00000008c03c0000 [ 0.220350] CPU2: Booted secondary processor 0x0000000100 [0x410fd034] [ 0.252609] Detected VIPT I-cache on CPU3 [ 0.252637] GICv3: CPU3: found redistributor 101 region 0:0x00000000018e0000 [ 0.252694] CPU3: using LPI pending table @0x00000008c0450000 [ 0.252729] CPU3: Booted secondary processor 0x0000000101 [0x410fd034] [ 0.252874] smp: Brought up 1 node, 4 CPUs [ 0.328511] SMP: Total of 4 processors activated. [ 0.333332] CPU features: detected: GIC system register CPU interface [ 0.339943] CPU features: detected: 32-bit EL0 Support [ 0.367785] CPU: All CPU(s) started at EL2 [ 0.372008] alternatives: patching kernel code [ 0.377994] devtmpfs: initialized [ 0.392447] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.402451] futex hash table entries: 1024 (order: 0, 65536 bytes) [ 0.410205] pinctrl core: initialized pinctrl subsystem [ 0.416199] NET: Registered protocol family 16 [ 0.422030] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____)) [ 0.429621] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.443023] DMA: preallocated 256 KiB pool for atomic allocations [ 0.451521] davinci_gpio 42110000.wkup_gpio0: IRQ not populated, err = -517 [ 0.465260] davinci_gpio 600000.main_gpio0: IRQ not populated, err = -517 [ 0.472418] davinci_gpio 601000.main_gpio1: IRQ not populated, err = -517 [ 0.490060] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.496948] HugeTLB registered 512 MiB page size, pre-allocated 0 pages [ 0.505696] cryptd: max_cpu_qlen set to 1000 [ 0.511820] media: Linux media interface: v0.10 [ 0.516509] videodev: Linux video capture interface: v2.00 [ 0.522170] pps_core: LinuxPPS API ver. 1 registered [ 0.527254] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.536615] PTP clock support registered [ 0.540667] EDAC MC: Ver: 3.0.0 [ 0.545076] Advanced Linux Sound Architecture Driver Initialized. [ 0.552248] clocksource: Switched to clocksource arch_sys_counter [ 0.558697] VFS: Disk quotas dquot_6.6.0 [ 0.562812] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes) [ 0.577150] NET: Registered protocol family 2 [ 0.582346] tcp_listen_portaddr_hash hash table entries: 4096 (order: 0, 65536 bytes) [ 0.590503] TCP established hash table entries: 32768 (order: 2, 262144 bytes) [ 0.598197] TCP bind hash table entries: 32768 (order: 3, 524288 bytes) [ 0.605545] TCP: Hash tables configured (established 32768 bind 32768) [ 0.612395] UDP hash table entries: 2048 (order: 0, 65536 bytes) [ 0.618669] UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes) [ 0.625551] NET: Registered protocol family 1 [ 0.630636] RPC: Registered named UNIX socket transport module. [ 0.636714] RPC: Registered udp transport module. [ 0.641532] RPC: Registered tcp transport module. [ 0.646350] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.654069] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.667159] Initialise system trusted keyrings [ 0.671981] workingset: timestamp_bits=46 max_order=16 bucket_order=0 [ 0.683886] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.690560] NFS: Registering the id_resolver key type [ 0.695767] Key type id_resolver registered [ 0.700053] Key type id_legacy registered [ 0.704174] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.711209] 9p: Installing v9fs 9p2000 file system support [ 0.722016] Key type asymmetric registered [ 0.726230] Asymmetric key parser 'x509' registered [ 0.731289] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.738871] io scheduler noop registered [ 0.742894] io scheduler deadline registered [ 0.747411] io scheduler cfq registered (default) [ 0.752273] io scheduler mq-deadline registered [ 0.756914] io scheduler kyber registered [ 0.762590] pinctrl-single 4301c000.pinmux: 70 pins, size 280 [ 0.769186] pinctrl-single 11c000.pinmux: 185 pins, size 740 [ 0.775154] pinctrl-single 11c2e8.pinmux: 9 pins, size 36 [ 0.781885] pinctrl-single a40000.timesync_router: 512 pins, size 2048 [ 0.796838] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 0.819299] brd: module loaded [ 0.829774] loop: module loaded [ 0.835303] libphy: Fixed MDIO Bus: probed [ 0.840126] tun: Universal TUN/TAP device driver, 1.6 [ 0.846055] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 0.854080] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.860199] sky2: driver version 1.30 [ 0.865335] VFIO - User Level meta-driver version: 0.3 [ 0.871424] i2c /dev entries driver [ 0.876317] sdhci: Secure Digital Host Controller Interface driver [ 0.882654] sdhci: Copyright(c) Pierre Ossman [ 0.887550] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.894582] ledtrig-cpu: registered to indicate activity on CPUs [ 0.900829] ti-sci interconnect@100000:interconnect@28380000:interconnect@42040000:dmsc: invalid resource [ 0.911626] optee: probing for conduit method from DT. I/TC: Dynamic shared memory is disabled [ 0.916930] optee: revision 3.4 (251f7c63) [ 0.920864] optee: initialized driver [ 0.930192] NET: Registered protocol family 17 [ 0.934832] 9pnet: Installing 9P2000 support [ 0.939273] Key type dns_resolver registered [ 0.944314] registered taskstats version 1 [ 0.948516] Loading compiled-in X.509 certificates [ 0.954507] davinci_gpio 42110000.wkup_gpio0: IRQ not populated, err = -517 [ 0.962089] davinci_gpio 600000.main_gpio0: IRQ not populated, err = -517 [ 0.969289] davinci_gpio 601000.main_gpio1: IRQ not populated, err = -517 [ 0.985726] ti-sci interconnect@100000:interconnect@28380000:interconnect@42040000:dmsc: invalid resource [ 0.995728] ti-sci interconnect@100000:interconnect@28380000:interconnect@42040000:dmsc: ABI: 2.6 (firmware rev 0x0013 '19.4.1-v2019.04a (Curious Crow)') [ 1.028847] random: fast init done [ 1.526701] davinci_gpio 42110000.wkup_gpio0: IRQ not populated, err = -517 [ 1.534240] davinci_gpio 600000.main_gpio0: IRQ not populated, err = -517 [ 1.541442] davinci_gpio 601000.main_gpio1: IRQ not populated, err = -517 [ 1.549794] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz [ 1.556307] omap_i2c 40b00000.i2c: bus 1 rev0.12 at 100 kHz [ 1.584937] omap_i2c 2000000.i2c: bus 2 rev0.12 at 400 kHz [ 1.591273] omap_i2c 2010000.i2c: bus 3 rev0.12 at 400 kHz [ 1.597603] omap_i2c 2020000.i2c: bus 4 rev0.12 at 400 kHz [ 1.603890] omap_i2c 2030000.i2c: bus 5 rev0.12 at 100 kHz [ 1.613651] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,160] sci-dev-id:195 [ 1.623646] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: enabled [ 1.630334] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66344100, num_proxies:64 [ 1.638191] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:818, gp-rings[304,464] sci-dev-id:187 [ 1.648269] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: enabled [ 1.654957] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66344100, num_proxies:64 [ 1.662745] omap8250 40a00000.serial: PM domain ti_sci_pd will not be powered off [ 1.670801] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 8, base_baud = 6000000) is a 8250 [ 1.680560] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 18, base_baud = 3000000) is a 8250 [ 1.689332] console [ttyS2] enabled [ 1.689332] console [ttyS2] enabled [ 1.696388] bootconsole [ns16550a0] disabled [ 1.696388] bootconsole [ns16550a0] disabled [ 1.705783] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 19, base_baud = 3000000) is a 8250 [ 1.715046] 2820000.serial: ttyS4 at MMIO 0x2820000 (irq = 20, base_baud = 3000000) is a 8250 [ 1.726085] cadence-qspi 47040000.spi: mt35xu512aba (65536 Kbytes) [ 1.732298] 7 cmdlinepart partitions found on MTD device 47040000.spi.0 [ 1.738913] Creating 7 MTD partitions on "47040000.spi.0": [ 1.744414] 0x000000000000-0x000000080000 : "ospi.tiboot3" [ 1.750744] 0x000000080000-0x000000280000 : "ospi.tispl" [ 1.756741] 0x000000280000-0x000000680000 : "ospi.u-boot" [ 1.762832] 0x000000680000-0x0000006a0000 : "ospi.env" [ 1.768675] 0x0000006a0000-0x0000006c0000 : "ospi.env.backup" [ 1.775030] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw" [ 1.780971] 0x000000800000-0x000004000000 : "ospi.rootfs" [ 1.984525] cadence-qspi 47040000.spi: Cadence QSPI NOR probe failed -517 [ 1.999219] am65-cpsw-nuss 46000000.ethernet: rx-flow-id-base is not set -22 [ 2.006391] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA07100, cpsw version 0x6BA80100 Ports: 2 [ 2.017991] UDMA has not been proped [ 2.021590] am65-cpsw-nuss 46000000.ethernet: Failed to request tx dma channel -517 [ 2.031723] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a2109, freq:200000000, add_val:4 pps:0 [ 2.040474] thermal thermal_zone1: failed to read out thermal zone (-22) [ 2.047198] thermal thermal_zone2: failed to read out thermal zone (-22) [ 2.054636] OF: /interconnect@100000/interconnect@28380000/rti@40610000: arguments longer than property [ 2.064044] keystone-wdt 40610000.rti: heartbeat 60 sec [ 2.070191] mmc0: Unknown controller version (4). You may experience problems. [ 2.108538] mmc0: SDHCI controller on 4f80000.sdhci [4f80000.sdhci] using ADMA 64-bit [ 2.117206] mmc1: Unknown controller version (4). You may experience problems. [ 2.155581] mmc1: SDHCI controller on 4fa0000.sdhci [4fa0000.sdhci] using ADMA 64-bit [ 2.171221] mmc0: new HS200 MMC card at address 0001 [ 2.177414] mmcblk0: mmc0:0001 R1J56L 14.7 GiB [ 2.184068] mmcblk0boot0: mmc0:0001 R1J56L partition 1 8.00 MiB [ 2.194014] mmcblk0boot1: mmc0:0001 R1J56L partition 2 8.00 MiB [ 2.200122] mmcblk0rpmb: mmc0:0001 R1J56L partition 3 4.00 MiB, chardev (243:0) [ 2.209945] Alternate GPT is invalid, using primary GPT. [ 2.215341] mmcblk0: p1 p2 p3 p4 p5 p6 [ 2.220855] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fc5900 [ 2.228690] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fc5900 [ 2.237370] mmc1: new SDHC card at address e624 [ 2.243075] mmcblk1: mmc1:e624 SD04G 3.69 GiB [ 2.247837] ti-udma 285c0000.udmap: Channels: 96 (tchan: 48, echan: 0, rchan: 48, rflow: 96) [ 2.262958] ti-udma 31150000.udmap: Channels: 267 (tchan: 120, echan: 32, rchan: 150, rflow: 300) [ 2.271955] mmcblk1: p1 p2 [ 2.291441] cadence-qspi 47040000.spi: mt35xu512aba (65536 Kbytes) [ 2.297669] 7 cmdlinepart partitions found on MTD device 47040000.spi.0 [ 2.304284] Creating 7 MTD partitions on "47040000.spi.0": [ 2.309775] 0x000000000000-0x000000080000 : "ospi.tiboot3" [ 2.316080] 0x000000080000-0x000000280000 : "ospi.tispl" [ 2.322088] 0x000000280000-0x000000680000 : "ospi.u-boot" [ 2.328127] 0x000000680000-0x0000006a0000 : "ospi.env" [ 2.333876] 0x0000006a0000-0x0000006c0000 : "ospi.env.backup" [ 2.340269] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw" [ 2.346234] 0x000000800000-0x000004000000 : "ospi.rootfs" [ 2.359261] m25p80 spi7.0: n25q128a13 (16384 Kbytes) [ 2.365644] am65-cpsw-nuss 46000000.ethernet: rx-flow-id-base is not set -22 [ 2.372819] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA07100, cpsw version 0x6BA80100 Ports: 2 [ 2.393081] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48 [ 2.406563] pps pps0: new PPS source ptp1 [ 2.410788] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a2109, freq:200000000, add_val:4 pps:1 [ 2.419769] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 0.4 [ 2.426990] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 [ 2.472265] am65-cpsw-nuss 46000000.ethernet: davinci mdio revision 9.7, bus freq 1000000 [ 2.480443] libphy: 46000000.ethernet: probed [ 2.488114] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.495104] hctosys: unable to open rtc device (rtc0) [ 2.597382] ALSA device list: [ 2.600367] No soundcards found. [ 2.633201] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.641357] VFS: Mounted root (ext4 filesystem) on device 179:98. [ 2.662801] devtmpfs: mounted [ 2.666064] Freeing unused kernel memory: 576K [ 2.670551] Run /sbin/init as init process [ 3.336288] systemd[1]: System time before build time, advancing clock. [ 3.512670] NET: Registered protocol family 10 [ 3.518219] Segment Routing with IPv6 [ 3.586349] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 3.608095] systemd[1]: Detected architecture arm64. Welcome to Arago 2019.05! [ 3.649488] systemd[1]: Set hostname to . [ 3.955859] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.972959] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 4.275978] random: systemd: uninitialized urandom read (16 bytes read) [ 4.283238] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 4.337797] random: systemd: uninitialized urandom read (16 bytes read) [ 4.346315] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.364404] random: systemd: uninitialized urandom read (16 bytes read) [ 4.371068] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 4.388576] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 4.413481] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ OK ] Started Hardware RNG Entropy Gatherer Daemon. Starting Create list of required st…ce nodes for the current kernel... [ OK ] Listening on Process Core Dump Socket. [ OK ] Listening on udev Control Socket. Starting Load Kernel Modules... [ OK ] Listening on Journal Socket (/dev/log). [ 4.566350] cryptodev: loading out-of-tree module taints kernel. [ 4.578170] cryptodev: driver 1.9 loaded. Mounting Huge Pages File System... Mounting Kernel Debug File System... [ OK ] Listening on Network Service Netlink Socket. Starting Journal Service... [ OK ] Listening on initctl Compatibility Named Pipe. Starting Remount Root and Kernel File Systems... [ OK ] Created slice system-getty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 4.687991] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Paths. [ OK ] Listening on udev Kernel Socket. Starting udev Coldplug all Devices... [ OK ] Reached target Slices. [ OK ] Reached target Swap. Mounting Temporary Directory (/tmp)... [ OK ] Started Journal Service. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started Load Kernel Modules. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Mounted Temporary Directory (/tmp). Mounting Kernel Configuration File System... Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev... Starting Flush Journal to Persistent Storage... [ OK ] Mounted Kernel Configuration File System. [ OK ] Started Apply Kernel Variables. [ 5.092835] systemd-journald[163]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). Mounting /var/volatile... Mounting /media/ram... [ OK ] Reached target Containers. Starting udev Kernel Device Manager... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Started Load/Save Random Seed. [ OK ] Started Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started udev Kernel Device Manager. Starting Network Service... [ OK ] Started udev Coldplug all Devices. [ OK ] Started Network Service. Starting Network Name Resolution... [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on RPCbind Server Activation Socket. [ 5.833262] omap_rng 4e10000.trng: Random Number Generator ver. 230b34c [ OK ] Listening on dropbear.socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Login Service... Starting RPC Bind Service... Starting rng-tools.service... [ 6.002808] [drm] Initialized pvr 1.17.4948957 20110701 for 7000000.gpu on minor 0 [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. [ OK ] Started Periodic Command Scheduler. [ OK ] Started D-Bus System Message Bus. Starting TI IPC Daemon... [ OK ] Started Job spooling tools. [ OK ] Started irqbalance daemon. Starting Reboot and dump vmcore via kexec... [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timers. Starting Print notice about GPLv3 packages... [ OK ] Started Network Name Resolution. [ 6.317087] k3_r5_rproc interconnect@100000:interconnect@28380000:r5fss@41000000: creating child devices for R5F cores [ OK ] Found device /dev/ttyS2. [ 6.335272] platform 41000000.r5f: assigned reserved memory node r5f-dma-memory@9c000000 [ 6.346439] remoteproc remoteproc0: 41000000.r5f is available [ OK ] Started TI IPC Daemon. [ OK ] Reached target Network. Starting Lightning Fast Webserver With Light System Requirements... Starting Permit User Sessions... Starting Simple Network Management Protocol (SNMP) Daemon.... [ OK ] Reached target Host and Network Name Lookups. [ 6.455472] random: crng init done [ 6.459556] random: 7 urandom warning(s) missed due to ratelimiting [ 6.525236] TI DP83867 k3-cpsw-mdio:00: attached PHY driver [TI DP83867] (mii_bus:phy_addr=k3-cpsw-mdio:00, irq=POLL) [ 6.545416] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.008389] davinci_mdio b232400.mdio: davinci mdio revision 1.7, bus freq 1000000 [ 7.018197] libphy: b232400.mdio: probed [ 7.065645] remoteproc remoteproc0: powering up 41000000.r5f [ 7.071715] remoteproc remoteproc0: Booting fw image am65x-mcu-r5f0_0-fw, size 4050720 [ 7.084888] davinci_mdio b232400.mdio: phy[0]: device b232400.mdio:00, driver TI DP83867 [ 7.094159] platform 41000000.r5f: booting R5F core using boot addr = 0x0 [ 7.101268] davinci_mdio b232400.mdio: phy[3]: device b232400.mdio:03, driver TI DP83867 [ 7.109962] remoteproc remoteproc0: registered virtio0 (type 7) [ 7.116326] remoteproc remoteproc0: remote processor 41000000.r5f is now up [ 7.184104] remoteproc remoteproc1: b034000.pru is available [ 7.194123] pru-rproc b034000.pru: PRU rproc node pru@b034000 probed successfully [ 7.229023] remoteproc remoteproc2: b004000.rtu is available [ 7.253155] pru-rproc b004000.rtu: PRU rproc node rtu@b004000 probed successfully [ 7.299330] remoteproc remoteproc3: b038000.pru is available [ 7.332715] pru-rproc b038000.pru: PRU rproc node pru@b038000 probed successfully [ 7.359073] remoteproc remoteproc4: b006000.rtu is available [ 7.379491] pru-rproc b006000.rtu: PRU rproc node rtu@b006000 probed successfully [ 7.395993] remoteproc remoteproc5: b134000.pru is available [ 7.422714] pru-rproc b134000.pru: PRU rproc node pru@b134000 probed successfully [ 7.435256] remoteproc remoteproc6: b104000.rtu is available [ 7.470869] pru-rproc b104000.rtu: PRU rproc node rtu@b104000 probed successfully [ 7.490129] remoteproc remoteproc7: b138000.pru is available [ 7.514518] pru-rproc b138000.pru: PRU rproc node pru@b138000 probed successfully [ 7.529136] remoteproc remoteproc8: b106000.rtu is available [ 7.543592] pru-rproc b106000.rtu: PRU rproc node rtu@b106000 probed successfully [ 7.556024] am65-cpsw-nuss 46000000.ethernet eth0: Link is Down [ 7.565341] remoteproc remoteproc9: b234000.pru is available [ 7.591827] pru-rproc b234000.pru: PRU rproc node pru@b234000 probed successfully [ 7.626304] remoteproc remoteproc10: b204000.rtu is available [ 7.632743] pru-rproc b204000.rtu: PRU rproc node rtu@b204000 probed successfully [ 7.643158] remoteproc remoteproc11: b238000.pru is available [ 7.652864] pru-rproc b238000.pru: PRU rproc node pru@b238000 probed successfully [ 7.662874] remoteproc remoteproc12: b206000.rtu is available [ 7.678047] pru-rproc b206000.rtu: PRU rproc node rtu@b206000 probed successfully [ 7.801504] icssg-prueth pruss2_eth: css:probing [ 7.816373] icssg-prueth pruss2_eth: css:match [ 7.821168] icssg-prueth pruss2_eth: css:alloc [ 7.825901] icssg-prueth pruss2_eth: css:least [ 7.830786] icssg-prueth pruss2_eth: css:miigrt [ 7.835642] icssg-prueth pruss2_eth: css:miigrt_paired [ 7.844747] icssg-prueth pruss2_eth: css:mii rt [ 7.873847] icssg-prueth pruss2_eth: css:mii rt paired [ 7.891297] icssg-prueth pruss2_eth: sram: ICSSG0 pa 0x0000000070020000 va 0000000015aa0053 size 18800 [ 7.931989] icssg-prueth pruss2_eth: css_net:port check [ 7.942807] icssg-prueth pruss2_eth: css_net:port ok [ OK ] Started Login Service. [ OK ] Started RPC Bind Service. [ OK ] Started rng-tools.service. [ 7.957857] icssg-prueth pruss2_eth: css_net:mac ok [ OK ] Started Reboot and dump vmcore via kexec. [ OK ] Started Lightning Fast Webserver With Light [ 7.974779] icssg-prueth pruss2_eth: css_net:alloc ok System Requirements. [ OK ] Started Permit User Sessions. [ 7.994043] icssg-prueth pruss2_eth: css_net:iep ok [ 8.001192] icssg-prueth pruss2_eth: css_net:phy ok [ 8.006309] icssg-prueth pruss2_eth: css_net:link phy ok [ 8.014406] icssg-prueth pruss2_eth: css_net:phy-mode ok [ 8.054584] icssg-prueth pruss2_eth: css_net:connect phy ok [ 8.062437] icssg-prueth pruss2_eth: css_net:iep init ok [ 8.086045] icssg-prueth pruss2_eth: css:eth0 net_init [ 8.109026] icssg-prueth pruss2_eth: css:eth0 pass [ 8.128413] icssg-prueth pruss2_eth: css_net:port check [ 8.134579] NET: Registered protocol family 15 [ 8.169899] icssg-prueth pruss2_eth: css_net:port ok [ 8.180937] icssg-prueth pruss2_eth: css_net:mac ok [ 8.191931] icssg-prueth pruss2_eth: css_net:alloc ok [ 8.199752] icssg-prueth pruss2_eth: css_net:iep ok [ 8.205015] icssg-prueth pruss2_eth: css_net:phy ok [ 8.210237] icssg-prueth pruss2_eth: css_net:link phy ok [ 8.218845] icssg-prueth pruss2_eth: css_net:phy-mode ok [ 8.252462] icssg-prueth pruss2_eth: css_net:connect phy ok [ 8.259314] icssg-prueth pruss2_eth: css_net:iep init ok [ 8.272036] icssg-prueth pruss2_eth: css:eth1 pass [ 8.300055] icssg-prueth pruss2_eth: css:eth0 register pass [ 8.323575] icssg-prueth pruss2_eth: css:eth1 register pass [ 8.331799] icssg-prueth pruss2_eth: TI PRU ethernet initialized: dual EMAC mode, dual_icssg 0 [ 8.401188] Initializing XFRM netlink socket [ 8.463226] dwc3 4030000.usb: Failed to get clk 'ref': -2 [ 8.508428] OF: graph: no port node found in /interconnect@100000/phy@4110000 [ 8.659953] virtio_rpmsg_bus virtio0: rpmsg host is online [ 8.660830] virtio_rpmsg_bus virtio0: creating channel rpmsg-proto addr 0x3d [ 8.715260] NET: Registered protocol family 45 [ 8.723547] icssg-prueth pruss2_eth eth2: flow id base = 150 [ 8.736353] icssg-prueth pruss2_eth eth2: mgm flow id base = 154 [ 8.749391] remoteproc remoteproc11: powering up b238000.pru [ 8.768031] remoteproc remoteproc11: Booting fw image ti-pruss/am65x-pru1-prueth-fw.elf, size 14868 [ 8.777449] remoteproc remoteproc11: remote processor b238000.pru is now up [ 8.788480] remoteproc remoteproc12: powering up b206000.rtu [ 8.820580] remoteproc remoteproc12: Booting fw image ti-pruss/am65x-rtu1-prueth-fw.elf, size 15488 [ 8.830022] remoteproc remoteproc12: remote processor b206000.rtu is now up [ 8.841882] net eth2: started [ 8.845377] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 8.892989] icssg-prueth pruss2_eth eth1: flow id base = 157 [ 8.913786] icssg-prueth pruss2_eth eth1: mgm flow id base = 161 [ 8.927511] remoteproc remoteproc9: powering up b234000.pru [ 8.951026] remoteproc remoteproc9: Booting fw image ti-pruss/am65x-pru0-prueth-fw.elf, size 14868 [ 8.960886] remoteproc remoteproc9: remote processor b234000.pru is now up [ 8.969199] remoteproc remoteproc10: powering up b204000.rtu [ 9.007574] remoteproc remoteproc10: Booting fw image ti-pruss/am65x-rtu0-prueth-fw.elf, size 15488 [ 9.016898] remoteproc remoteproc10: remote processor b204000.rtu is now up [ 9.025291] net eth1: started [ 9.028758] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ OK ] Created slice system-systemd\x2dfsck.slice. Starting File System Check on /dev/mmcblk0p4... Starting File System Check on /dev/mmcblk0p1... Starting File System Check on /dev/mmcblk0p6... Starting File System Check on /dev/mmcblk0p5... [ OK ] Started Serial Getty on ttyS2. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... Starting rc.pvr.service... [ OK ] Started NFS status monitor for NFSv2/3 locking.. [FAILED] Failed to start Synchronize System and HW clocks. See 'systemctl status sync-clocks.service' for details. [ OK ] Started File System Check on /dev/mmcblk0p1. Mounting /run/media/mmcblk0p1... [ OK ] Mounted /run/media/mmcblk0p1. data: fsck 0.0% complete...[ 11.077916] PVR_K: UM DDK-(4948957) and KM DDK-(4948957) match. [ OK ] [ OK ] Started rc.pvr.service. Starting weston.service... [ OK ] Started File System Check on /dev/mmcblk0p4. [ OK ] Started File System Check on /dev/mmcblk0p5. Mounting /run/media/mmcblk0p5... Mounting /run/media/mmcblk0p4... [FAILED] Failed to start File System Check on /dev/mmcblk0p6. See 'systemctl status systemd-fsck@dev-mmcblk0p6.serv[ 11.236395] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null) ice' for details. [DEPEND] Dependency failed for /[ 11.237802] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null) run/media/mmcblk0p6. [ OK ] Mounted /run/media/mmcblk0p5. [ OK ] Mounted /run/media/mmcblk0p4. [ OK ] Started weston.service. Starting Matrix GUI... Starting telnetd.service... [ OK ] Started telnetd.service. Starting thttpd.service... [ OK ] Started Matrix GUI. [ OK ] Started thttpd.service. Starting thermal-zone-init.service... [ OK ] Started thermal-zone-init.service. [ OK ] Found device /dev/mmcblk1p1. Starting File System Check on /dev/mmcblk1p1... [ OK ] Started Simple Network Management Protocol (SNMP) Daemon.. [ OK ] Started File System Check on /dev/mmcblk1p1. Mounting /run/media/mmcblk1p1... [ OK ] Mounted /run/media/mmcblk1p1. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am65xx-evm ttyS2 Arago 2019.05 am65xx-evm ttyS2 am65xx-evm login: [ 18.245605] icssg-prueth pruss2_eth eth1: Link is Up - 1Gbps/Full - flow control off [ 18.253475] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 20.097582] icssg-prueth pruss2_eth eth2: Link is Up - 1Gbps/Full - flow control off [ 20.105456] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf bash bc binutils cifs-utils cpio cpp-symlinks cpp dosfstools elfutils g++-symlinks g++ gawk gcc-symlinks gcc gdb gdbserver gettext glmark2 gstreamer1.0-libav gzip hidapi libbfd libdw1 libelf1 libgdbm-compat4 libgdbm6 libgettextlib libgettextsrc libgmp10 libidn2-0 libmpc3 libmpfr6 libreadline7 libunistring2 m4 make nettle parted pdm-anomaly-detection which If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am65xx-evm ttyS2 Arago 2019.05 am65xx-evm ttyS2 am65xx-evm login: root root@am65xx-evm:~# root@am65xx-evm:~# root@am65xx-evm:~# root@am65xx-evm:~# ifconfig eth0 Link encap:Ethernet HWaddr F4:84:4C:EB:B5:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 70:FF:76:1D:23:56 inet addr:192.168.13.37 Bcast:192.168.13.255 Mask:255.255.255.0 inet6 addr: fe80::72ff:76ff:fe1d:2356/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:232 errors:0 dropped:5 overruns:0 frame:0 TX packets:32 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:33878 (33.0 KiB) TX bytes:3467 (3.3 KiB) eth2 Link encap:Ethernet HWaddr 70:FF:76:1D:23:57 inet addr:192.168.13.38 Bcast:192.168.13.255 Mask:255.255.255.0 inet6 addr: fe80::72ff:76ff:fe1d:2357/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:177 errors:0 dropped:13 overruns:0 frame:0 TX packets:26 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:26824 (26.1 KiB) TX bytes:2975 (2.9 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:2 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:140 (140.0 B) TX bytes:140 (140.0 B) root@am65xx-evm:~# insmod /lib/modules/4.19.38-g4dae378bbe/kernel/drivers/net/bonding/bonding.ko [ 60.287568] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) root@am65xx-evm:~# ifconfig eth1 down [ 72.285974] remoteproc remoteproc10: stopped remote processor b204000.rtu [ 72.292828] remoteproc remoteproc9: stopped remote processor b234000.pru [ 72.303959] net eth1: stopped root@am65xx-evm:~# [ 72.512324] icssg-prueth pruss2_eth eth1: Link is Down root@am65xx-evm:~# ifconfig eth2 down [ 76.478229] remoteproc remoteproc12: stopped remote processor b206000.rtu [ 76.485057] remoteproc remoteproc11: stopped remote processor b238000.pru [ 76.496079] net eth2: stopped root@am65xx-evm:~# [ 77.440318] icssg-prueth pruss2_eth eth2: Link is Down root@am65xx-evm:~# root@am65xx-evm:~# root@am65xx-evm:~# echo 1 > /sys/class/net/bond0/bonding/mode root@am65xx-evm:~# echo 100 > /sys/class/net/bond0/bonding/miimon root@am65xx-evm:~# ifconfig bond0 192.168.13.37 netmask 255.255.255.0 up [ 116.781452] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready root@am65xx-evm:~# echo +eth1 > /sys/class/net/bond0/bonding/primary root@am65xx-evm:~# echo +eth1 > /sys/class/net/bond0/bonding/slaves [ 137.068346] icssg-prueth pruss2_eth eth1: flow id base = 150 [ 137.077265] icssg-prueth pruss2_eth eth1: mgm flow id base = 154 [ 137.085870] remoteproc remoteproc9: powering up b234000.pru [ 137.091933] remoteproc remoteproc9: Booting fw image ti-pruss/am65x-pru0-prueth-fw.elf, size 14868 [ 137.100938] remoteproc remoteproc9: remote processor b234000.pru is now up [ 137.107845] remoteproc remoteproc10: powering up b204000.rtu [ 137.113613] remoteproc remoteproc10: Booting fw image ti-pruss/am65x-rtu0-prueth-fw.elf, size 15488 [ 137.122693] remoteproc remoteproc10: remote processor b204000.rtu is now up [ 137.131154] net eth1: started [ 137.135161] bond0: Enslaving eth1 as a backup interface with a down link root@am65xx-evm:~# [ 140.193565] icssg-prueth pruss2_eth eth1: Link is Up - 1Gbps/Full - flow control off [ 140.288574] bond0: link status definitely up for interface eth1, 1000 Mbps full duplex [ 140.296530] bond0: making interface eth1 the new active one [ 140.302626] bond0: first active interface up! [ 140.307042] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready root@am65xx-evm:~# root@am65xx-evm:~# root@am65xx-evm:~# echo +eth2 > /sys/class/net/bond0/bonding/slaves [ 145.387812] icssg-prueth pruss2_eth eth2: flow id base = 157 [ 145.396727] icssg-prueth pruss2_eth eth2: mgm flow id base = 161 [ 145.405357] remoteproc remoteproc11: powering up b238000.pru [ 145.411247] remoteproc remoteproc11: Booting fw image ti-pruss/am65x-pru1-prueth-fw.elf, size 14868 [ 145.420337] remoteproc remoteproc11: remote processor b238000.pru is now up [ 145.427335] remoteproc remoteproc12: powering up b206000.rtu [ 145.433102] remoteproc remoteproc12: Booting fw image ti-pruss/am65x-rtu1-prueth-fw.elf, size 15488 [ 145.442178] remoteproc remoteproc12: remote processor b206000.rtu is now up [ 145.450654] net eth2: started [ 145.454700] bond0: Enslaving eth2 as a backup interface with a down link root@am65xx-evm:~# [ 146.048250] ------------[ cut here ]------------ [ 146.052889] NETDEV WATCHDOG: eth1 (icssg-prueth): transmit queue 0 timed out [ 146.060007] WARNING: CPU: 3 PID: 0 at net/sched/sch_generic.c:461 dev_watchdog+0x29c/0x2a8 [ 146.068254] Modules linked in: bonding rpmsg_proto virtio_rpmsg_bus ti_am335x_adc kfifo_buf dwc3 xfrm_user udc_core xfrm4_tunnel tunnel4 ipcomp xfrm_ipcomp esp4 ah4 af_key xfrm_algo icssg_prueth pru_rproc crc32_ce crct10dif_ce pruss irq_pruss_intc ti_k3_r5_remoteproc remoteproc pvrsrvkm(O) ti_am335x_tscadc pruss_soc_bus sa2ul omap_rng rng_core authenc phy_omap_usb2 dwc3_keystone sch_fq_codel cryptodev(O) ipv6 [ 146.104525] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G O 4.19.38-g4dae378bbe #1 [ 146.112942] Hardware name: Texas Instruments AM654 Base Board (DT) [ 146.119111] pstate: 20000005 (nzCv daif -PAN -UAO) [ 146.123893] pc : dev_watchdog+0x29c/0x2a8 [ 146.127895] lr : dev_watchdog+0x29c/0x2a8 [ 146.131892] sp : ffff00000806fd80 [ 146.135196] x29: ffff00000806fd80 x28: 0000000000000005 [ 146.140500] x27: ffff80084016ca80 x26: 00000000ffffffff [ 146.145802] x25: 0000000000000140 x24: ffff8008467d4440 [ 146.151106] x23: ffff8008467d441c x22: ffff800845e46680 [ 146.156408] x21: ffff000008c11000 x20: ffff8008467d4000 [ 146.161711] x19: 0000000000000000 x18: 0000000000000010 [ 146.167014] x17: 0000000000000000 x16: 0000000000000000 [ 146.172317] x15: ffffffffffffffff x14: ffff000008c13648 [ 146.177620] x13: ffff000088cc68a7 x12: ffff000008cc68b0 [ 146.182923] x11: ffff000008c29000 x10: ffff00000806fa80 [ 146.188225] x9 : 00000000ffffffd0 x8 : ffff0000084b9260 [ 146.193528] x7 : 6575657571207469 x6 : ffff80087fb017e0 [ 146.198831] x5 : ffff00000840b770 x4 : 0000000000000008 [ 146.204134] x3 : 0000000000000004 x2 : 0000000000000040 [ 146.209437] x1 : be457ce7715cd800 x0 : 0000000000000000 [ 146.214739] Call trace: [ 146.217182] dev_watchdog+0x29c/0x2a8 [ 146.220842] call_timer_fn+0x20/0x78 [ 146.224410] expire_timers+0xa8/0xb8 [ 146.227977] run_timer_softirq+0xa4/0x190 [ 146.231979] __do_softirq+0x10c/0x208 [ 146.235635] irq_exit+0xb8/0xc8 [ 146.238771] __handle_domain_irq+0x64/0xb8 [ 146.242857] gic_handle_irq+0x7c/0x178 [ 146.246596] el1_irq+0xb0/0x128 [ 146.249731] arch_cpu_idle+0x10/0x18 [ 146.253300] do_idle+0x128/0x140 [ 146.256521] cpu_startup_entry+0x20/0x28 [ 146.260436] secondary_start_kernel+0x148/0x158 [ 146.264955] ---[ end trace 9a08eee7263cd65f ]--- [ 146.269580] icssg-prueth pruss2_eth eth1: xmit timeout [ 148.513573] icssg-prueth pruss2_eth eth2: Link is Up - 1Gbps/Full - flow control off [ 148.524627] bond0: link status definitely up for interface eth2, 1000 Mbps full duplex [ 152.192261] icssg-prueth pruss2_eth eth1: xmit timeout [ 158.080260] icssg-prueth pruss2_eth eth1: xmit timeout [ 162.944263] icssg-prueth pruss2_eth eth1: xmit timeout [ 168.064252] icssg-prueth pruss2_eth eth1: xmit timeout [ 173.184250] icssg-prueth pruss2_eth eth1: xmit timeout [ 179.072251] icssg-prueth pruss2_eth eth1: xmit timeout root@am65xx-evm:~# root@am65xx-evm:~# root@am65xx-evm:~# root@am65xx-evm:~# root@am65xx-evm:~# ping 192.168[ 184.192253] icssg-prueth pruss2_eth eth1: xmit timeout .10.114 PING 192.168.10.114 (192.168.10.114): 56 data bytes [ 190.080258] icssg-prueth pruss2_eth eth1: xmit timeout [ 194.944256] icssg-prueth pruss2_eth eth1: xmit timeout ^C --- 192.168.10.114 ping statistics --- 10 packets transmitted, 0 packets received, 100% packet loss root@am65xx-evm:~# root@am65xx-evm:~# root@am65xx-evm:~# [ 200.064257] icssg-prueth pruss2_eth eth1: xmit timeout ping 192.168.10.114[ 205.184253] icssg-prueth pruss2_eth eth1: xmit timeout root@am65xx-evm:~# root@am65xx-evm:~# root@am65xx-evm:~# ifconfig bond0 Link encap:Ethernet HWaddr 70:FF:76:1D:23:56 inet addr:192.168.13.37 Bcast:192.168.13.255 Mask:255.255.255.0 inet6 addr: fe80::72ff:76ff:fe1d:2356/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:532 errors:0 dropped:31 overruns:0 frame:0 TX packets:21 errors:12 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:63174 (61.6 KiB) TX bytes:2184 (2.1 KiB) eth0 Link encap:Ethernet HWaddr F4:84:4C:EB:B5:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 70:FF:76:1D:23:56 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:409 errors:0 dropped:11 overruns:0 frame:0 TX packets:35 errors:12 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:56717 (55.3 KiB) TX bytes:3731 (3.6 KiB) eth2 Link encap:Ethernet HWaddr 70:FF:76:1D:23:56 inet addr:192.168.13.38 Bcast:192.168.13.255 Mask:255.255.255.0 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:941 errors:0 dropped:60 overruns:0 frame:0 TX packets:54 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:119266 (116.4 KiB) TX bytes:5729 (5.5 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:13 errors:0 dropped:0 overruns:0 frame:0 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1364 (1.3 KiB) TX bytes:1364 (1.3 KiB) root@am65xx-evm:~# [ 210.048261] icssg-prueth pruss2_eth eth1: xmit timeout [ 215.168259] icssg-prueth pruss2_eth eth1: xmit timeout [ 220.032256] icssg-prueth pruss2_eth eth1: xmit timeout [ 225.152256] icssg-prueth pruss2_eth eth1: xmit timeout [ 230.016254] icssg-prueth pruss2_eth eth1: xmit timeout root@am65xx-evm:~# root@am65xx-evm:~# root@am65xx-evm:~# root@am65xx-evm:~# [ 235.136255] icssg-prueth pruss2_eth eth1: xmit timeout mo  [ 240.000252] icssg-prueth pruss2_eth eth1: xmit timeout root@am65xx-evm:~# root@am65xx-evm:~# [ 245.120254] icssg-prueth pruss2_eth eth1: xmit timeout mdio ^C root@am65xx-evm:~# ^C root@am65xx-evm:~# dmesg | rep[ 249.984254] icssg-prueth pruss2_eth eth1: xmit timeout  ^C root@am65xx-evm:~# ^C root@am65xx-evm:~# ^C root@am65xx-evm:~# dmesg | grep mdio [ 2.472265] am65-cpsw-nuss 46000000.ethernet: davinci mdio revision 9.7, bus freq 1000000 [ 6.525236] TI DP83867 k3-cpsw-mdio:00: attached PHY driver [TI DP83867] (mii_bus:phy_addr=k3-cpsw-mdio:00, irq=POLL) [ 7.008389] davinci_mdio b232400.mdio: davinci mdio revision 1.7, bus freq 1000000 [ 7.018197] libphy: b232400.mdio: probed [ 7.084888] davinci_mdio b232400.mdio: phy[0]: device b232400.mdio:00, driver TI DP83867 [ 7.101268] davinci_mdio b232400.mdio: phy[3]: device b232400.mdio:03, driver TI DP83867 root@am65xx-evm:~# [ 255.104260] icssg-prueth pruss2_eth eth1: xmit timeout