/** * These arguments were used when this file was generated. They will be automatically applied on subsequent loads * via the GUI or CLI. Run CLI with '--help' for additional information on how to override these arguments. * @cliArgs --device "AM243x_ALX_beta" --package "ALX" --part "ALX" --context "r5fss0-0" --product "MCU_PLUS_SDK_AM243x@12.00.00" * @versions {"tool":"1.17.0+3128"} */ /** * Import the modules used in this configuration. */ const flash = scripting.addModule("/board/flash/flash", {}, false); const flash1 = flash.addInstance(); const bootloader = scripting.addModule("/drivers/bootloader/bootloader", {}, false); const bootloader1 = bootloader.addInstance(); const uart = scripting.addModule("/drivers/uart/uart", {}, false); const uart1 = uart.addInstance(); const debug_log = scripting.addModule("/kernel/dpl/debug_log"); const dpl_cfg = scripting.addModule("/kernel/dpl/dpl_cfg"); const mpu_armv7 = scripting.addModule("/kernel/dpl/mpu_armv7", {}, false); const mpu_armv71 = mpu_armv7.addInstance(); const mpu_armv72 = mpu_armv7.addInstance(); const mpu_armv73 = mpu_armv7.addInstance(); const mpu_armv74 = mpu_armv7.addInstance(); const default_linker = scripting.addModule("/memory_configurator/default_linker", {}, false); const default_linker1 = default_linker.addInstance(); const general = scripting.addModule("/memory_configurator/general", {}, false); const general1 = general.addInstance(); const region = scripting.addModule("/memory_configurator/region", {}, false); const region1 = region.addInstance(); const section = scripting.addModule("/memory_configurator/section", {}, false); const section1 = section.addInstance(); const section2 = section.addInstance(); const section3 = section.addInstance(); const section4 = section.addInstance(); const section5 = section.addInstance(); /** * Write custom configuration values to the imported modules. */ flash1.$name = "CONFIG_FLASH0"; flash1.bootQuirks = "Flash_quirkQSPIEarlyFixup"; flash1.flashQeType = "5"; flash1.peripheralDriver.$name = "CONFIG_OSPI0"; flash1.peripheralDriver.dmaEnable = true; flash1.peripheralDriver.inputClkFreq = 100000000; bootloader1.bootMedia = "MEM"; bootloader1.$name = "CONFIG_BOOTLOADER_MEM"; uart1.$name = "CONFIG_UART0"; uart1.intrEnable = "DISABLE"; uart1.UART.$assign = "USART0"; const udma = scripting.addModule("/drivers/udma/udma", {}, false); const udma1 = udma.addInstance({}, false); udma1.$name = "CONFIG_UDMA0"; flash1.peripheralDriver.udmaDriver = udma1; debug_log.enableCssLog = false; debug_log.enableLogZoneInfo = true; mpu_armv71.$name = "CONFIG_MPU_REGION0"; mpu_armv71.size = 31; mpu_armv71.attributes = "Device"; mpu_armv71.accessPermissions = "Supervisor RD+WR, User RD"; mpu_armv71.allowExecute = false; mpu_armv72.$name = "CONFIG_MPU_REGION1"; mpu_armv72.size = 15; mpu_armv72.accessPermissions = "Supervisor RD+WR, User RD"; mpu_armv73.$name = "CONFIG_MPU_REGION2"; mpu_armv73.baseAddr = 0x41010000; mpu_armv73.size = 15; mpu_armv73.accessPermissions = "Supervisor RD+WR, User RD"; mpu_armv74.$name = "CONFIG_MPU_REGION3"; mpu_armv74.accessPermissions = "Supervisor RD+WR, User RD"; mpu_armv74.baseAddr = 0x70000000; mpu_armv74.size = 21; default_linker1.$name = "memory_configurator_default_linker0"; general1.$name = "CONFIG_GENERAL0"; general1.entry_point = "-e_vectors_sbl"; general1.irq_stack_size = 4096; general1.svc_stack_size = 256; general1.linker.$name = "TIARMCLANG0"; region1.$name = "MEMORY_REGION_CONFIGURATION0"; region1.memory_region.create(7); region1.memory_region[0].type = "TCMA_R5F"; region1.memory_region[0].$name = "R5F_VECS"; region1.memory_region[0].size = 0x40; region1.memory_region[0].auto = false; region1.memory_region[1].type = "TCMA_R5F"; region1.memory_region[1].$name = "R5F_TCMA"; region1.memory_region[1].size = 0x7FC0; region1.memory_region[2].type = "TCMB_R5F"; region1.memory_region[2].$name = "R5F_TCMB0"; region1.memory_region[2].size = 0x8000; region1.memory_region[3].$name = "MSRAM_VECS"; region1.memory_region[3].auto = false; region1.memory_region[3].size = 0x100; region1.memory_region[4].$name = "MSRAM_0"; region1.memory_region[4].auto = false; region1.memory_region[4].manualStartAddress = 0x70000100; region1.memory_region[4].size = 0x70F00; region1.memory_region[5].$name = "MSRAM_1"; region1.memory_region[5].auto = false; region1.memory_region[5].manualStartAddress = 0x70071000; region1.memory_region[5].size = 0x1F000; region1.memory_region[6].auto = false; region1.memory_region[6].$name = "MSRAM_2"; region1.memory_region[6].manualStartAddress = 0x70090000; region1.memory_region[6].size = 0x150000; section1.$name = "Vector Table"; section1.group = false; section1.load_memory = "MSRAM_VECS"; section1.output_section.create(1); section1.output_section[0].$name = ".vectors"; section1.output_section[0].palignment = true; section2.$name = "Text Segments"; section2.load_memory = "MSRAM_0"; section2.output_section.create(7); section2.output_section[0].palignment = true; section2.output_section[0].$name = ".text"; section2.output_section[1].palignment = true; section2.output_section[1].$name = ".text.hwi"; section2.output_section[2].palignment = true; section2.output_section[2].$name = ".text.cache"; section2.output_section[3].palignment = true; section2.output_section[3].$name = ".text.mpu"; section2.output_section[4].palignment = true; section2.output_section[4].$name = ".text.boot"; section2.output_section[5].$name = ".data"; section2.output_section[5].palignment = true; section2.output_section[6].$name = ".rodata"; section2.output_section[6].palignment = true; section3.$name = "Memory Segments"; section3.load_memory = "MSRAM_1"; section3.group = false; section3.output_section.create(3); section3.output_section[0].$name = ".bss"; section3.output_section[0].palignment = true; section3.output_section[0].output_sections_start = "__BSS_START"; section3.output_section[0].output_sections_end = "__BSS_END"; section3.output_section[1].$name = ".sysmem"; section3.output_section[1].palignment = true; section3.output_section[2].$name = ".stack"; section3.output_section[2].palignment = true; section4.$name = "Stack Segments"; section4.load_memory = "MSRAM_1"; section4.output_section.create(5); section4.output_section[0].$name = ".irqstack"; section4.output_section[0].output_sections_start = "__IRQ_STACK_START"; section4.output_section[0].output_sections_end = "__IRQ_STACK_END"; section4.output_section[0].input_section.create(1); section4.output_section[0].input_section[0].$name = ". = . + __IRQ_STACK_SIZE;"; section4.output_section[1].$name = ".fiqstack"; section4.output_section[1].output_sections_start = "__FIQ_STACK_START"; section4.output_section[1].output_sections_end = "__FIQ_STACK_END"; section4.output_section[1].input_section.create(1); section4.output_section[1].input_section[0].$name = ". = . + __FIQ_STACK_SIZE;"; section4.output_section[2].$name = ".svcstack"; section4.output_section[2].output_sections_start = "__SVC_STACK_START"; section4.output_section[2].output_sections_end = "__SVC_STACK_END"; section4.output_section[2].input_section.create(1); section4.output_section[2].input_section[0].$name = ". = . + __SVC_STACK_SIZE;"; section4.output_section[3].$name = ".abortstack"; section4.output_section[3].output_sections_start = "__ABORT_STACK_START"; section4.output_section[3].output_sections_end = "__ABORT_STACK_END"; section4.output_section[3].input_section.create(1); section4.output_section[3].input_section[0].$name = ". = . + __ABORT_STACK_SIZE;"; section4.output_section[4].$name = ".undefinedstack"; section4.output_section[4].output_sections_start = "__UNDEFINED_STACK_START"; section4.output_section[4].output_sections_end = "__UNDEFINED_STACK_END"; section4.output_section[4].input_section.create(1); section4.output_section[4].input_section[0].$name = ". = . + __UNDEFINED_STACK_SIZE;"; section5.$name = "CONFIG_SECTION0"; section5.type = "NOLOAD"; section5.group = false; section5.load_memory = "MSRAM_2"; section5.output_section.create(1); section5.output_section[0].$name = ".bss.filebuf"; section5.output_section[0].alignment = 0; /** * Pinmux solution for unlocked pins/peripherals. This ensures that minor changes to the automatic solver in a future * version of the tool will not impact the pinmux you originally saw. These lines can be completely deleted in order to * re-solve from scratch. */ flash1.peripheralDriver.OSPI.$suggestSolution = "OSPI0"; flash1.peripheralDriver.OSPI.CLK.$suggestSolution = "OSPI0_CLK"; flash1.peripheralDriver.OSPI.CSn0.$suggestSolution = "OSPI0_CSn0"; flash1.peripheralDriver.OSPI.D3.$suggestSolution = "OSPI0_D3"; flash1.peripheralDriver.OSPI.D2.$suggestSolution = "OSPI0_D2"; flash1.peripheralDriver.OSPI.D1.$suggestSolution = "OSPI0_D1"; flash1.peripheralDriver.OSPI.D0.$suggestSolution = "OSPI0_D0"; uart1.UART.RXD.$suggestSolution = "UART0_RXD"; uart1.UART.TXD.$suggestSolution = "UART0_TXD";