[ 5.063605] PRM: I/O chain clock line assertion timed out [ OK ] Started Rebuild Hardware Database. [ 5.774530] PRM: I/O chain clock line assertion timed out Starting udev Coldplug all Devices... [ 5.803634] PRM: I/O chain clock line assertion timed out Starting Update is Completed... [ 5.843648] PRM: I/O chain clock line assertion timed out [ OK ] Started Update is Completed. [ 5.883615] PRM: I/O chain clock line assertion timed out [ 6.499155] omap-rproc 58820000.ipu: assigned reserved memory node ipu1_cma@9d000000 [ 6.549565] remoteproc0: 58820000.ipu is available [ 6.581006] remoteproc0: Note: remoteproc is still under development and considered experimental. [ OK ] Found device /dev/ttyS2. [ 6.620768] PRM: I/O chain clock line assertion timed out [ 6.644187] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 6.702053] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 [ OK ] Started udev Coldplug all Devices.[ 6.746830] remoteproc1: 55020000.ipu is available [ 6.753443] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc0 [ 6.766243] PRM: I/O chain clock line assertion timed out [ 6.800520] remoteproc1: Note: remoteproc is still under development and considered experimental. [ OK ] Reached target System Initialization. [ 6.838801] PRM: I/O chain clock line assertion timed out [ 6.858059] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 6.869975] palmas-usb 48070000.i2c:tps659038@58:tps659038_usb: USB-HOST cable is attached [ OK ] Listening on RPCbind Server Activation Socket. [ 6.903612] PRM: I/O chain clock line assertion timed out [ 6.925977] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ OK ] Started Daily Cleanup of Temporary Directories.[ 6.951466] alg: skcipher: setkey failed on test 5 for ecb-des-omap: flags=100 [ 6.963105] PRM: I/O chain clock line assertion timed out [ OK ] Reached target Timers. [ 7.003898] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-omap: flags=100 [ 7.013844] PRM: I/O chain clock line assertion timed out [ 7.034611] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-omap: flags=100 [ OK ] Listening on D-Bus System Message Bus Socket. [ 7.063601] PRM: I/O chain clock line assertion timed out [ 7.070460] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ 7.085294] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [ 7.101403] remoteproc2: 40800000.dsp is available [ OK ] Reached target Sockets.[ 7.115964] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 7.140340] remoteproc0: registered virtio0 (type 7) [ 7.145766] PRM: I/O chain clock line assertion timed out [ OK ] Reached target Basic System.[ 7.163868] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 7.193614] PRM: I/O chain clock line assertion timed out [ OK ] Started Serial Getty on ttyS2. [ 7.243626] PRM: I/O chain clock line assertion timed out [ OK ] Started D-Bus System Message Bus. [ 7.303628] PRM: I/O chain clock line assertion timed out [ 7.399533] vip 48970000.vip: loading firmware vpdma-1b8.bin [ 7.443434] vip 48970000.vip: VPDMA firmware loaded [ 7.501175] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 7.555198] SCSI subsystem initialized [ 7.615704] remoteproc1: registered virtio1 (type 7) [ 8.035669] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin [ 8.053650] vpe 489d0000.vpe: Device registered as /dev/video0 [ 8.060488] ti-pruss 4b200000.pruss: creating PRU cores and other child platform devices [ 8.133374] davinci_mdio 4b232400.mdio: davinci mdio revision 1.6 [ 8.139504] libphy: 4b232400.mdio: probed [ 8.161263] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 8.169819] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 8.251144] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 8.264673] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 8.271432] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 8.311655] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 8.350137] scsi host0: ahci [ 8.358762] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 349 Starting Network Service... [ 8.400066] ti-pruss 4b280000.pruss: creating PRU cores and other child platform devices [ 8.408547] PRM: I/O chain clock line assertion timed out [ OK ] Reached target Containers. [ 8.453620] PRM: I/O chain clock line assertion timed out [ 8.483634] davinci_mdio 4b2b2400.mdio: davinci mdio revision 1.6 [ 8.489764] libphy: 4b2b2400.mdio: probed [ 8.555935] remoteproc3: 4b234000.pru0 is available [ 8.560931] remoteproc3: Note: remoteproc is still under development and considered experimental. [ 8.614454] remoteproc3: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ OK ] Started Network Service. [ 8.630111] PRM: I/O chain clock line assertion timed out [ 8.663835] pru-rproc 4b234000.pru0: PRU rproc node /ocp/pruss@4b200000/pru0@4b234000 probed successfully [ 8.692374] remoteproc4: 4b238000.pru1 is available [ 8.711833] remoteproc4: Note: remoteproc is still under development and considered experimental. [ OK ] Reached target Network. [ 8.726059] PRM: I/O chain clock line assertion timed out [ 8.749957] remoteproc4: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. Starting Network Name Resolution... [ 8.783649] PRM: I/O chain clock line assertion timed out [ 8.792406] pru-rproc 4b238000.pru1: PRU rproc node /ocp/pruss@4b200000/pru1@4b238000 probed successfully Starting Dropbear SSH daemon... [ 8.833980] PRM: I/O chain clock line assertion timed out [ 8.853749] remoteproc5: 4b2b4000.pru0 is available [ 8.870793] remoteproc5: Note: remoteproc is still under development and considered experimental. [ 8.912124] remoteproc5: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 8.943820] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.958085] pru-rproc 4b2b4000.pru0: PRU rproc node /ocp/pruss@4b280000/pru0@4b2b4000 probed successfully [ 8.976181] ata1.00: HPA detected: current 61857727, native 61865984 [ 9.004430] ata1.00: ATA-9: ATP SATA III mSATA, N0516B, max UDMA/133 [ 9.023496] remoteproc6: 4b2b8000.pru1 is available [ OK ] Started Network Name Resolution. [ 9.055125] ata1.00: 61857727 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 9.062444] remoteproc2: registered virtio2 (type 7) [ 9.072182] remoteproc6: Note: remoteproc is still under development and considered experimental. [ 9.081721] PRM: I/O chain clock line assertion timed out [ 9.126969] ata1.00: configured for UDMA/133 [ OK ] Started Dropbear SSH daemon.[ 9.141986] remoteproc6: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 9.174337] PRM: I/O chain clock line assertion timed out [ 9.201279] scsi 0:0:0:0: Direct-Access ATA ATP SATA III mSA 6B PQ: 0 ANSI: 5 [ 9.233629] pru-rproc 4b2b8000.pru1: PRU rproc node /ocp/pruss@4b280000/pru1@4b2b8000 probed successfully [ 9.302681] prueth pruss2_eth: port 1: using random MAC addr: 2a:aa:ed:d4:6d:50 [ 9.331687] prueth pruss2_eth: couldn't connect to phy /ocp/pruss@4b280000/mdio@4b2b2400/ethernet-phy@0 [ 9.385556] prueth pruss2_eth: netdev init ethernet-mii0 failed: -19 [ 9.392134] prueth pruss2_eth: port 2: using random MAC addr: aa:f3:49:d2:c6:1b [ 9.465768] prueth pruss2_eth: couldn't connect to phy /ocp/pruss@4b280000/mdio@4b2b2400/ethernet-phy@1 [ 9.520133] prueth pruss2_eth: netdev init ethernet-mii1 failed: -19 [ 9.558257] prueth pruss2_eth: TI PRU ethernet driver initialized [ 9.591922] prueth pruss1_eth: port 1: using random MAC addr: f6:b9:dc:2a:1a:62 [ 9.637006] prueth pruss1_eth: couldn't connect to phy /ocp/pruss@4b200000/mdio@4b232400/ethernet-phy@0 [ 9.689203] prueth pruss1_eth: netdev init ethernet-mii0 failed: -19 [ 9.726947] prueth pruss1_eth: port 2: using random MAC addr: 0a:63:af:9d:c0:e3 [ 9.768912] prueth pruss1_eth: couldn't connect to phy /ocp/pruss@4b200000/mdio@4b232400/ethernet-phy@1 [ 9.820716] prueth pruss1_eth: netdev init ethernet-mii1 failed: -19 [ 9.852329] remoteproc0: powering up 58820000.ipu [ 9.861537] prueth pruss1_eth: TI PRU ethernet driver initialized [ 9.916192] remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 4890352 [ 9.923197] omap-iommu 58882000.mmu: 58882000.mmu: version 2.1 [ 9.974286] sd 0:0:0:0: [sda] 61857727 512-byte logical blocks: (31.7 GB/29.5 GiB) [ 10.003994] sd 0:0:0:0: [sda] Write Protect is off [ 10.023436] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.044976] remoteproc0: remote processor 58820000.ipu is now up [ 10.065105] virtio_rpmsg_bus virtio0: rpmsg host is online [ 10.070749] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x32 [ 10.080235] sda: sda1 sda2 [ 10.095215] sd 0:0:0:0: [sda] Attached SCSI disk [ 10.104173] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x33 [ 10.132902] virtio_rpmsg_bus virtio0: creating channel rpmsg-omx addr 0x3c [ 10.174159] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x65 [ 10.224666] remoteproc1: powering up 55020000.ipu [ 10.236087] remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3743116 [ 10.243084] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ 10.474586] remoteproc1: remote processor 55020000.ipu is now up [ 10.484529] virtio_rpmsg_bus virtio1: rpmsg host is online [ 10.490076] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x65 [ 10.514011] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x66 [ 10.544256] remoteproc2: powering up 40800000.dsp [ 10.636037] remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 21914156 [ 10.650239] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 10.656131] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 10.662105] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 10.765618] remoteproc2: remote processor 40800000.dsp is now up [ 10.813671] virtio_rpmsg_bus virtio2: rpmsg host is online [ 10.819220] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x3d [ 10.835402] rpmsg_rpc rpmsg3: probing service rpc_example_2 with src 1024 dst 101 [ 10.865145] rpmsg_rpc rpmsg4: probing service dce-callback with src 1024 dst 101 [ 10.872622] rpmsg_rpc rpmsg3: published functions = 8 [ 10.881910] NET: Registered protocol family 41 [ 10.905168] rpmsg_rpc rpmsg5: probing service rpmsg-dce with src 1025 dst 102 [ 10.912375] rpmsg_rpc rpmsg4: published functions = 4 [ 10.927018] rpmsg_rpc rpmsg5: published functions = 9 [ 11.077011] usbcore: registered new interface driver usbfs [ 11.083138] usbcore: registered new interface driver hub [ 11.089787] usbcore: registered new device driver usb [ 11.108301] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 11.114076] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 11.122144] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00210010 [ 11.132694] xhci-hcd xhci-hcd.0.auto: irq 432, io mem 0x48890000 [ 11.141034] hub 1-0:1.0: USB hub found [ 11.145680] hub 1-0:1.0: 1 port detected [ 11.150006] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 11.156715] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 11.165123] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 11.175009] hub 2-0:1.0: USB hub found [ 11.178809] hub 2-0:1.0: 1 port detected [ 11.183224] dwc3 488d0000.usb: otg: primary host xhci-hcd.1.auto registered [ 11.192087] dwc3 488d0000.usb: otg: shared host xhci-hcd.1.auto registered [ 11.199609] dwc3 488d0000.usb: otg: can't start till gadget registers [ 11.463319] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 11.493375] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 11.517337] hub 2-1:1.0: USB hub found [ 11.521539] hub 2-1:1.0: 4 ports detected [ 11.613376] hub 1-1:1.0: USB hub found [ 11.617556] hub 1-1:1.0: 4 ports detected [ 12.224585] PRM: I/O chain clock line assertion timed out [ 12.230996] PRM: I/O chain clock line assertion timed out Welcome to Tester-Master r-master login: root Password: # ls mk-eMMC-boot.sh # lsusb Bus 001 Device 002: ID 0451:8142 Bus 002 Device 002: ID 0451:8140 Bus 001 Device 001: ID 1d6b:0002 Bus 002 Device 001: ID 1d6b:0003 # ls /sys/class/udc 488d0000.usb # �