U-Boot SPL 2016.05 (Aug 21 2017 - 15:28:46) DRA752-GP ES1.1 MMC Device 1 not found *** Warning - No MMC card found, using default environment Trying to boot from MMC1 MMC Device 1 not found *** Warning - No MMC card found, using default environment reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2016.05 (Aug 21 2017 - 15:28:46 +0800) CPU : DRA752-GP ES1.1 Model: TI DRA742 Board: DRA74x EVM REV G.0 DRAM: 1.5 GiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Warning - bad CRC, using default environment GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid GPT *** GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid Backup GPT *** ERROR: cannot find partition: 'userdata' at arch/arm/cpu/armv7/omap-common/utils.c:195/mmc_get_part_size() Warning: fastboot.userdata_size: unable to calc SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: Warning: ethernet@48484000 using MAC address from ROM eth0: ethernet@48484000 Hit any key to stop autoboot: 2 1 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 222 bytes read in 7 ms (30.3 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 3627072 bytes read in 192 ms (18 MiB/s) 108573 bytes read in 43 ms (2.4 MiB/s) Booting from mmc0 ... Kernel image @ 0x82000000 [ 0x000000 - 0x375840 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe2000, end 8ffff81c ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.45 (hsuyz@hsuyz-VirtualBox) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #2 SMP PREEMPT Mon Aug 21 15:28:56 CST 2017 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA742 [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB [ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB [ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 32 MiB [ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009f000000, size 8 MiB [ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 64 MiB at 0x00000000dbc00000 [ 0.000000] Forcing write-allocate cache policy for SMP [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x00000000dfd00000 to fe600000 for dram barrier [ 0.000000] DRA752 ES1.1 [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef1ae000 s14848 r8192 d22016 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 389440 [ 0.000000] Kernel command line: console=ttyO0,115200n8 elevator=noop root=PARTUUID=e6381598-02 rw rootwait earlyprintk fixrtc omapdrm.num_crtc=2 consoleblank=0 cma=64M rootfstype=ext4 snd.slots_reserved=1,1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1309656K/1564672K available (6611K kernel code, 371K rwdata, 2492K rodata, 332K init, 290K bss, 25640K reserved, 229376K cma-reserved, 716800K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08ec044 (9105 kB) [ 0.000000] .init : 0xc08ed000 - 0xc0940000 ( 332 kB) [ 0.000000] .data : 0xc0940000 - 0xc099ce50 ( 372 kB) [ 0.000000] .bss : 0xc099e000 - 0xc09e6880 ( 291 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.008307] Switching to timer-based delay loop, resolution 162ns [ 0.014956] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.025215] OMAP clocksource: 32k_counter at 32768 Hz [ 0.030942] Console: colour dummy device 80x30 [ 0.035599] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.042393] This ensures that you still see kernel messages. Please [ 0.048910] update your kernel commandline. [ 0.053301] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.063936] pid_max: default: 32768 minimum: 301 [ 0.068844] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.075732] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.083578] Initializing cgroup subsys io [ 0.087800] Initializing cgroup subsys memory [ 0.092374] Initializing cgroup subsys devices [ 0.097024] Initializing cgroup subsys freezer [ 0.101681] Initializing cgroup subsys perf_event [ 0.106598] Initializing cgroup subsys pids [ 0.110996] CPU: Testing write buffer coherency: ok [ 0.116289] /cpus/cpu@0 missing clock-frequency property [ 0.121833] /cpus/cpu@1 missing clock-frequency property [ 0.127391] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.133312] Setting up static identity map for 0x80008380 - 0x800083e0 [ 0.220522] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.220580] Brought up 2 CPUs [ 0.229601] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.236039] CPU: All CPU(s) started in HYP mode. [ 0.240861] CPU: Virtualization extensions available. [ 0.246507] devtmpfs: initialized [ 0.279041] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.287969] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.500216] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.514825] pinctrl core: initialized pinctrl subsystem [ 0.521160] NET: Registered protocol family 16 [ 0.526768] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.563992] cpuidle: using governor ladder [ 0.594022] cpuidle: using governor menu [ 0.606967] OMAP GPIO hardware version 0.1 [ 0.615348] GPIO line 161 (radio_rst) hogged as output/low [ 0.623411] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.648511] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.653891] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.672066] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.680384] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.686915] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.694607] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.702852] OMAP DMA hardware revision 0.0 [ 0.748375] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.759321] edma 43300000.edma: memcpy is disabled [ 0.769098] edma 43300000.edma: TI EDMA DMA engine driver [ 0.779075] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.785145] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.791207] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.797251] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.803437] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.809530] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.818672] palmas 0-0058: IRQ missing: skipping irq request [ 0.835801] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0 [ 0.908138] pcf857x 0-0020: probed [ 0.912270] pcf857x 0-0021: probed [ 0.916010] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.936133] GPIO line 463 (vin6_sel_s0) hogged as output/low [ 0.942121] pcf857x 1-0026: probed [ 0.946412] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz [ 0.952577] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 0.978625] pcf857x 3-0021: probed [ 0.982221] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz [ 0.988240] media: Linux media interface: v0.10 [ 0.993037] Linux video capture interface: v2.00 [ 0.997899] pps_core: LinuxPPS API ver. 1 registered [ 1.003093] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.012580] PTP clock support registered [ 1.016750] EDAC MC: Ver: 3.0.0 [ 1.020804] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 1.027447] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 1.034145] Advanced Linux Sound Architecture Driver Initialized. [ 1.041371] clocksource: Switched to clocksource arch_sys_counter [ 1.058370] NET: Registered protocol family 2 [ 1.063437] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.070813] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.077646] TCP: Hash tables configured (established 8192 bind 8192) [ 1.084310] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.090493] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.097319] NET: Registered protocol family 1 [ 1.102146] RPC: Registered named UNIX socket transport module. [ 1.108310] RPC: Registered udp transport module. [ 1.113238] RPC: Registered tcp transport module. [ 1.118150] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.125928] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 1.136856] futex hash table entries: 512 (order: 3, 32768 bytes) [ 1.150885] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.157668] NFS: Registering the id_resolver key type [ 1.162978] Key type id_resolver registered [ 1.167358] Key type id_legacy registered [ 1.171629] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.178202] bounce: pool size: 64 pages [ 1.182414] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.190097] io scheduler noop registered (default) [ 1.195144] io scheduler deadline registered [ 1.199641] io scheduler cfq registered [ 1.208656] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 1.219303] PCI host bridge /ocp/axi@0/pcie_rc@51000000 ranges: [ 1.225511] No bus range found for /ocp/axi@0/pcie_rc@51000000, using [bus 00-ff] [ 1.233513] IO 0x20003000..0x20012fff -> 0x00000000 [ 1.238884] MEM 0x20013000..0x2fffffff -> 0x20013000 [ 1.277199] dra7-pcie 51000000.pcie_rc: link is not up [ 1.282734] dra7-pcie 51000000.pcie_rc: PCI host bridge to bus 0000:00 [ 1.289522] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.295266] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.301711] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 1.309247] PCI: bus0: Fast back to back transfers disabled [ 1.315180] PCI: bus1: Fast back to back transfers enabled [ 1.320971] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 1.328050] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 1.335124] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.340519] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 1.372052] fpd3_serdes: probe of 7-002c failed with error -5 [ 1.378180] fpd3_serdes 1-001b: Serializer fpd3_24b_ser ready [ 1.385724] fpd3_serdes 7-002c: Deserializer fpd3_24b_des ready [ 1.452502] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 1.462557] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 301, base_baud = 3000000) is a 8250 [ 1.471774] console [ttyS0] enabled [ 1.471774] console [ttyS0] enabled [ 1.478939] bootconsole [earlycon0] disabled [ 1.478939] bootconsole [earlycon0] disabled [ 1.488610] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 302, base_baud = 3000000) is a 8250 [ 1.498316] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 303, base_baud = 3000000) is a 8250 [ 1.508421] [drm] Initialized drm 1.1.0 20060810 [ 1.515110] OMAP DSS rev 6.1 [ 1.518877] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 1.527368] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops) [ 1.537293] connector-hdmi connector@1: failed to find video source [ 1.549863] loop: module loaded [ 1.553999] nand: No NAND device found [ 1.557768] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch [ 1.567630] m25p80 spi32766.0: s25fl256s1 (32768 Kbytes) [ 1.573048] 7 ofpart partitions found on MTD device spi32766.0 [ 1.578907] Creating 7 MTD partitions on "spi32766.0": [ 1.584085] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 1.590141] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 1.596452] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 1.603377] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 1.609994] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 1.617337] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 1.623648] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 1.631339] libphy: Fixed MDIO Bus: probed [ 1.681404] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 1.687529] davinci_mdio 48485000.mdio: detected phy mask fffffff3 [ 1.697898] libphy: 48485000.mdio: probed [ 1.701972] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver unknown [ 1.710011] davinci_mdio 48485000.mdio: phy[3]: device 48485000.mdio:03, driver unknown [ 1.718743] cpsw 48484000.ethernet: Detected MACID = 20:c3:8f:1e:24:2e [ 1.725443] cpsw 48484000.ethernet: cpts: overflow check period 800 [ 1.732438] cpsw 48484000.ethernet: cpsw: Detected MACID = 20:c3:8f:1e:24:2f [ 1.741140] mousedev: PS/2 mouse device common for all mice [ 1.747527] i2c /dev entries driver [ 1.753309] tvp5158 1-0058: Camera sensor driver registered [ 1.759253] ov1063x 1-0037: Failed writing register 0x0103! [ 1.764905] ov1063x: probe of 1-0037 failed with error -121 [ 1.771286] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin [ 1.778388] vip 48970000.vip: loading firmware vpdma-1b8.bin [ 1.788857] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.793582] vpe 489d0000.vpe: Device registered as /dev/video0 [ 1.801400] vip 48970000.vip: VPDMA firmware loaded [ 1.806465] vip1-s0: Port A: Using subdev tvp5158 1-0058 for capture [ 1.813057] vip1-s0: device registered as video1 [ 1.817838] vip1-s0: device registered as video2 [ 1.822046] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 1.822053] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 1.822197] evm_3v3_sw: supplied by sysen1 [ 1.839578] vip1-s0: device registered as video3 [ 1.844382] vip1-s0: device registered as video4 [ 1.915134] mmc0: MAN_BKOPS_EN bit is not set [ 1.924983] mmc0: new HS200 MMC card at address 0001 [ 1.930415] mmcblk0: mmc0:0001 MMC08G 7.25 GiB [ 1.935220] mmcblk0boot0: mmc0:0001 MMC08G partition 1 8.00 MiB [ 1.941428] mmcblk0boot1: mmc0:0001 MMC08G partition 2 8.00 MiB [ 1.948097] mmcblk0: p2 [ 2.287239] ledtrig-cpu: registered to indicate activity on CPUs [ 2.295746] hwspinlock_user gatemp: requested 10 hwspinlocks [ 2.303220] aic_dvdd: supplied by evm_3v3_sw [ 2.309941] [ 2.309941] ============[davinci_mcasp_probe]============== [ 2.317105] ====>pm_runtime_forbid [ 2.320525] davinci-mcasp 48464000.mcasp: DAI is shared [ 2.325838] =========> [davinci_mcasp_probe] mem->start = [00000000] <== [ 2.332695] =========> [davinci_mcasp_probe] mcasp->base = [FA464000] <== [ 2.339668] [ 2.339668] ============[davinci_mcasp_probe]============== [ 2.346791] ====>pm_runtime_forbid [ 2.350211] davinci-mcasp 48468000.mcasp: DAI is shared [ 2.355484] =========> [davinci_mcasp_probe] mem->start = [00000000] <== [ 2.362314] =========> [davinci_mcasp_probe] mcasp->base = [FA468000] <== [ 2.369217] =====[McASP3]==== [ 2.372209] =====[mcasp->base][FA468000]===== [ 2.372209] [ 2.378132] [ 2.378132] ============[davinci_mcasp_probe]============== [ 2.385252] ====>pm_runtime_forbid [ 2.388669] davinci-mcasp 48474000.mcasp: DAI is shared [ 2.393943] =========> [davinci_mcasp_probe] mem->start = [00000000] <== [ 2.400758] =========> [davinci_mcasp_probe] mcasp->base = [FA474000] <== [ 2.407707] [ 2.407707] ============[davinci_mcasp_probe]============== [ 2.414832] ====>pm_runtime_forbid [ 2.418250] davinci-mcasp 4847c000.mcasp: DAI is shared [ 2.423524] =========> [davinci_mcasp_probe] mem->start = [00000000] <== [ 2.430340] =========> [davinci_mcasp_probe] mcasp->base = [FA47C000] <== [ 2.437968] omap-hdmi-audio omap-hdmi-audio.0.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok [ 2.448783] NET: Registered protocol family 10 [ 2.454087] sit: IPv6 over IPv4 tunneling driver [ 2.459281] NET: Registered protocol family 17 [ 2.464002] Key type dns_resolver registered [ 2.468437] omap_voltage_late_init: Voltage driver support not added [ 2.475357] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.481584] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.488289] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.494543] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.502794] Power Management for TI OMAP4+ devices. [ 2.507901] Registering SWP/SWPB emulation handler [ 2.514816] dmm 4e000000.dmm: initialized all PAT entries [ 2.531638] connector-hdmi connector@1: failed to find video source [ 2.538410] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.588806] connector-hdmi connector@1: failed to find video source [ 2.595945] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.602840] hctosys: unable to open rtc device (rtc0) [ 2.604067] connector-hdmi connector@1: failed to find video source [ 2.622582] aic_dvdd: disabling [ 2.625741] vmmcwl_fixed: disabling [ 2.629419] ldousb: disabling [ 2.632821] ALSA device list: [ 2.635797] #1: HDMI 58040000.encoder [ 2.640280] Waiting for root device PARTUUID=e6381598-02... [ 2.731181] mmc2: host does not support reading read-only switch, assuming write-enable [ 2.741654] mmc2: new high speed SDHC card at address e624 [ 2.747513] mmcblk1: mmc2:e624 SU08G 7.40 GiB [ 2.760139] mmcblk1: p1 p2 [ 2.764954] connector-hdmi connector@1: failed to find video source [ 2.906793] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.914958] VFS: Mounted root (ext4 filesystem) on device 179:50. [ 2.934751] devtmpfs: mounted [ 2.937903] Freeing unused kernel memory: 332K (c08ed000 - c0940000) [ 2.944300] This architecture does not have kernel memory protection. [ 3.216736] systemd[1]: System time before build time, advancing clock. [ 3.277048] random: systemd: uninitialized urandom read (16 bytes read, 19 bits of entropy available) [ 3.290727] random: systemd: uninitialized urandom read (16 bytes read, 19 bits of entropy available) [ 3.302439] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 3.320944] systemd[1]: Detected architecture arm. Welcome to Arago 2016.12! [ 3.342437] systemd[1]: Set hostname to . [ 3.435561] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 20 bits of entropy available) [ 3.436248] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 20 bits of entropy available) [ 3.436402] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 20 bits of entropy available) [ 3.483907] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 21 bits of entropy available) [ 3.501713] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 22 bits of entropy available) [ 3.622597] random: systemd: uninitialized urandom read (16 bytes read, 25 bits of entropy available) [ 3.632102] random: systemd: uninitialized urandom read (16 bytes read, 25 bits of entropy available) [ 3.641957] random: systemd: uninitialized urandom read (16 bytes read, 25 bits of entropy available) [ 4.078147] systemd[1]: sysinit.target: Found ordering cycle on sysinit.target/start [ 4.085987] systemd[1]: sysinit.target: Found dependency on alignment.service/start [ 4.093765] systemd[1]: sysinit.target: Found dependency on basic.target/start [ 4.101025] systemd[1]: sysinit.target: Found dependency on sockets.target/start [ 4.108493] systemd[1]: sysinit.target: Found dependency on avahi-daemon.socket/start [ 4.116373] systemd[1]: sysinit.target: Found dependency on sysinit.target/start [ 4.123819] systemd[1]: sysinit.target: Breaking ordering cycle by deleting job alignment.service/start [ 4.133270] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with sysinit.target/start [ SKIP ] Ordering cycle found, skipping alignment.service [ 4.174034] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 4.201573] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 4.222833] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 4.252111] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.281640] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 4.301637] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 4.331703] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 4.361593] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 4.391632] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 4.411546] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 4.453577] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 4.471698] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 4.491584] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 4.511639] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 4.541666] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 4.601754] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 4.623723] systemd[1]: Starting Journal Service... Starting Journal Service... [ 4.653838] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 4.711595] systemd[1]: Mounting Temporary Directory... Mounting Temporary Directory... [ 4.743970] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 4.773721] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ 4.803874] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ 4.881771] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 4.897157] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) [ 4.912429] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 4.939718] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 4.961644] systemd[1]: Mounted Debug File System. [ OK ] Mounted Debug File System. [ 4.981654] systemd[1]: Mounted Temporary Directory. [ OK ] Mounted Temporary Directory. [ 5.002040] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ OK ] Started Setup Virtual Console. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Starting Create Static Device Nodes in /dev... Starting Apply Kernel Variables... Starting Flush Journal to Persistent Storage... [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. [ 5.641979] systemd-journald[120]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... Starting udev Kernel Device Manager... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Coldplug all Devices. [ OK ] Started udev Kernel Device Manager. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. [ 6.062056] omap-rproc 58820000.ipu: assigned reserved memory node ipu1_cma@9d000000 [ 6.069879] remoteproc0: 58820000.ipu is available [ 6.091474] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 6.111434] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 6.130914] connector-hdmi connector@1: failed to find video source [ 6.137559] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 [ 6.156222] remoteproc1: 55020000.ipu is available [ 6.161129] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 6.201411] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. Starting Create Volatile Files and Directories... [ 6.234963] connector-hdmi connector@1: failed to find video source [ 6.241578] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [ 6.261679] remoteproc2: 40800000.dsp is available [ OK ] Started Load/Save Random Seed.[ 6.269850] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 6.291464] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 6.306814] connector-hdmi connector@1: failed to find video source [ 6.313443] omap-rproc 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000 [ 6.334299] remoteproc3: 41000000.dsp is available [ 6.339206] remoteproc3: Note: remoteproc is still under development and considered experimental. [ 6.353828] remoteproc3: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 6.365942] connector-hdmi connector@1: failed to find video source [ OK ] Started Create Volatile Files and Directories. [ OK ] Found device /dev/ttyS0. [ 6.572093] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ 6.582189] alg: skcipher: setkey failed on test 5 for ecb-des-omap: flags=100 [ 6.589660] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-omap: flags=100 Starting Network Time Synchronization... [ 6.610313] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-omap: flags=100 Starting Update UTMP about System Boot/Shutdown... [ 6.629332] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ 6.630912] connector-hdmi connector@1: failed to find video source [ 6.647682] connector-hdmi connector@1: failed to find video source [ 6.651083] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc0 [ 6.681021] connector-hdmi connector@1: failed to find video source [ OK ] Started Update UTMP about System Boot/Shutdown. [ 6.979684] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 6.989302] connector-hdmi connector@1: failed to find video source [ 6.997134] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ OK ] Started Network Time Synchronization. [ 7.043683] remoteproc0: registered virtio0 (type 7) [ 7.044024] SCSI subsystem initialized [ OK ] Reached target System Time Synchronized. [ 7.078109] remoteproc1: registered virtio1 (type 7) Starting Synchronize System and HW clocks... [ 7.149029] CAN device driver interface [ OK ] Started Synchronize System and HW clocks. [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ 7.480269] remoteproc2: registered virtio2 (type 7) [ 7.507768] remoteproc3: registered virtio3 (type 7) [ OK ] Listening on dropbear.socket. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ 7.589076] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 7.590070] connector-hdmi connector@1: failed to find video source [ OK ] Started System Logging Service. Starting Permit User Sessions... Starting Telephony service... [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. [ OK ] Started D-Bus System Message Bus. [ 7.741889] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 7.743395] connector-hdmi connector@1: failed to find video source [ 7.771042] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=365) [ 7.774145] connector-hdmi connector@1: failed to find video source [ 7.822654] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 7.824400] connector-hdmi connector@1: failed to find video source [ 7.865197] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 7.881932] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 7.921306] scsi host0: ahci [ 7.925106] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 345 [ 7.938159] connector-hdmi connector@1: failed to find video source [ 7.948009] [drm] Initialized pvr 1.14.3699939 20110701 on minor 0 [ 7.961917] connector-hdmi connector@1: failed to find video source [ 8.009770] EXT4-fs (mmcblk0p2): recovery complete [ 8.014964] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 8.291521] ata1: SATA link down (SStatus 0 SControl 300) [ 8.388055] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ OK ] Started Telephony service. [ 8.445209] NET: Registered protocol family 15 Starting Network Service...[ 8.480587] Bluetooth: Core ver 2.21 Starting Print notice about GPLv3 packages... Starting uim-sysfs.service... [ 8.537194] NET: Registered protocol family 31 Starting Save/Restore Sound Card State... Starting Avahi mDNS/DNS-SD Stack... Starting Login Service... [ 8.607352] net eth1: initializing cpsw version 1.15 (0) [ 8.614771] Bluetooth: HCI device and connection manager initialized [ OK ] Started Kernel Logging Service. [ 8.639189] Bluetooth: HCI socket layer initialized [ 8.645250] net eth0: initialized cpsw ale version 1.4 [ 8.666989] Bluetooth: L2CAP socket layer initialized [ 8.673029] net eth0: ALE Table size 1024 [ OK ] Started Network Service. [ OK ] Started Permit User Sessions. [ OK [ 8.700984] Bluetooth: SCO socket layer initialized ] Started Save/Restore Sound Card State. [ 8.719372] connector-hdmi connector@1: failed to find video source [ 8.795553] net eth1: phy found : id is : 0x20005c7a [ 8.841240] Initializing XFRM netlink socket [ 8.876452] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 8.945892] net eth0: initializing cpsw version 1.15 (0) [ 9.013492] connector-hdmi connector@1: failed to find video source [ 9.077567] net eth0: phy found : id is : 0x20005c7a [ 9.105724] remoteproc0: powering up 58820000.ipu [ 9.124032] remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 4870616 [ 9.143283] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.149727] omap-iommu 58882000.mmu: 58882000.mmu: version 2.1 [ 9.176757] remoteproc0: remote processor 58820000.ipu is now up [ 9.184098] virtio_rpmsg_bus virtio0: rpmsg host is online [ 9.185436] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x32 [ 9.185576] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x33 [ 9.185768] virtio_rpmsg_bus virtio0: creating channel rpmsg-omx addr 0x3c [ 9.185875] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x65 [ 9.292452] connector-hdmi connector@1: failed to find video source [ 9.311465] remoteproc1: powering up 55020000.ipu [ 9.320588] remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3743108 [ 9.361454] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ 9.375309] random: nonblocking pool is initialized [ 9.493000] remoteproc1: remote processor 55020000.ipu is now up [ 9.521729] virtio_rpmsg_bus virtio1: rpmsg host is online [ 9.524781] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x65 [ 9.541760] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x66 [ 9.592850] connector-hdmi connector@1: failed to find video source [ 9.605117] remoteproc2: powering up 40800000.dsp [ 9.613086] connector-hdmi connector@1: failed to find video source [ 9.656036] remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 5792160 [ 9.689666] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 9.695565] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 9.701512] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 9.738244] remoteproc2: remote processor 40800000.dsp is now up [ 9.755763] virtio_rpmsg_bus virtio2: rpmsg host is online [ 9.761312] virtio_rpmsg_bus virtio2: creating channel rpmsg-client-sample addr 0x32 [ 9.774552] virtio_rpmsg_bus virtio2: creating channel rpmsg-client-sample addr 0x33 [ 9.788581] connector-hdmi connector@1: failed to find video source [ 9.792894] virtio_rpmsg_bus virtio2: creating channel rpmsg-omx addr 0x3c [ 9.792990] virtio_rpmsg_bus virtio2: creating channel rpmsg-rpc addr 0x65 [ 9.814470] remoteproc3: powering up 41000000.dsp [ 9.842961] remoteproc3: Booting fw image dra7-dsp2-fw.xe66, size 5792188 [ 9.865758] omap_hwmod: mmu0_dsp2: _wait_target_disable failed [ 9.871651] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0 [ 9.877594] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0 [ 9.933439] remoteproc3: remote processor 41000000.dsp is now up [ 9.959501] virtio_rpmsg_bus virtio3: rpmsg host is online [ 9.965068] virtio_rpmsg_bus virtio3: creating channel rpmsg-client-sample addr 0x32 [ 9.979673] virtio_rpmsg_bus virtio3: creating channel rpmsg-client-sample addr 0x33 [ 10.000497] connector-hdmi connector@1: failed to find video source [ 10.010985] virtio_rpmsg_bus virtio3: creating channel rpmsg-omx addr 0x3c [ 10.027995] rpmsg_rpc rpmsg3: probing service rpc_example_2 with src 1024 dst 101 [ 10.069952] connector-hdmi connector@1: failed to find video source [ 10.070730] rpmsg_rpc rpmsg4: probing service dce-callback with src 1024 dst 101 [ 10.070944] rpmsg_rpc rpmsg5: probing service rpmsg-dce with src 1025 dst 102 [ 10.071111] rpmsg_rpc rpmsg9: probing service rpc_example_4 with src 1024 dst 101 [ 10.078025] virtio_rpmsg_bus virtio3: creating channel rpmsg-rpc addr 0x65 [ 10.078146] rpmsg_rpc rpmsg13: probing service rpc_example_3 with src 1024 dst 101 [ 10.079714] rpmsg_rpc rpmsg3: published functions = 8 [ 10.079738] rpmsg_rpc rpmsg4: published functions = 4 [ 10.079756] rpmsg_rpc rpmsg5: published functions = 9 [ 10.095325] rpmsg_rpc rpmsg9: published functions = 8 [ 10.095399] rpmsg_rpc rpmsg13: published functions = 8 [ 10.224362] connector-hdmi connector@1: failed to find video source [ 10.267758] usbcore: registered new interface driver usbfs [ 10.279273] usbcore: registered new interface driver hub [ 10.294518] usbcore: registered new device driver usb [ 10.322714] dwc3 48890000.usb: otg: primary host xhci-hcd.1.auto registered [ 10.335174] dwc3 48890000.usb: otg: shared host xhci-hcd.1.auto registered [ 10.358448] dwc3 48890000.usb: otg: can't start till gadget registers [ 10.382454] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 10.384051] connector-hdmi connector@1: failed to find video source [ 10.411183] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 [ 10.430139] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00210010 [ 10.452097] xhci-hcd xhci-hcd.2.auto: irq 511, io mem 0x488d0000 [ 10.470497] hub 1-0:1.0: USB hub found [ 10.479457] hub 1-0:1.0: 1 port detected [ 10.491559] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 10.492979] connector-hdmi connector@1: failed to find video source [ 10.519310] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 10.538520] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 10.559654] hub 2-0:1.0: USB hub found [ 10.563831] hub 2-0:1.0: 1 port detected [ OK ] Started Avahi mDNS/DNS-SD Stack.[ 10.570012] connector-hdmi connector@1: failed to find video source [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Reached target Sound Card. [ 10.606225] connector-hdmi connector@1: failed to find video source [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. [ OK ] Reached target Network. Starting Lightning Fast Webserver With Light System Requirements... Starting Network Name Resolution... [ OK ] Started Login Service. [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started Network Name Resolution. [ OK ] Started uim-sysfs.service. Starting rc.pvr.service... [ 11.001881] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [ OK ] Started rc.pvr.service. Starting weston.service... [ OK ] Started weston.service. Starting telnetd.service... Starting tiipclad-daemon.service... [ OK ] Started telnetd.service. [ OK ] Started tiipclad-daemon.service. Starting thttpd.service... [ OK ] Started thttpd.service. Starting rng-tools.service... [ OK ] Started rng-tools.service. Starting gdbserverproxy.service... [ OK ] Started gdbserverproxy.service. Starting matrix-gui-2.0.service... [ OK ] Started matrix-gui-2.0.service. Starting thermal-zone-init.service... [ OK ] Started thermal-zone-init.service. *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf binutils-dev binutils bison-dev bison cpp-symlinks cpp dosfstools g++-symlinks g++ gawk-dev gawk gcc-symlinks gcc gdb gdbc6x gdbserver gstreamer1.0-libav libcairo-perf-utils libgmp10 libidn11 libmpc3 libmpfr4 m4-dev m4 make nettle parted swig-dev swig If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. [ OK ] Reached target Multi-User System. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dra7xx-evm ttyS0 Arago 2016.12 dra7xx-evm ttyS0 dra7xx-evm login: