U-Boot SPL 2019.01-g1ebdbc7-dirty (Feb 26 2020 - 11:06:27 +0530) Trying to boot from MMC1 clock is disabled (0Hz) clock is enabled (400000Hz) CMD_SEND:0 ARG 0x00000000 MMC_RSP_NONE CMD_SEND:8 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:55 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:41 ARG 0x00000000 MMC_RSP_R3,4 0x00000000 CMD_SEND:55 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:41 ARG 0x00000000 MMC_RSP_R3,4 0x00000000 CMD_SEND:2 ARG 0x00000000 MMC_RSP_R2 0x00000000 0x00000000 0x00000000 0x00000000 DUMPING DATA 000 - 00 00 00 00 004 - 00 00 00 00 008 - 00 00 00 00 012 - 00 00 00 00 CMD_SEND:3 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:9 ARG 0x00000000 MMC_RSP_R2 0x00000000 0x00000000 0x00000000 0x00000000 DUMPING DATA 000 - 00 00 00 00 004 - 00 00 00 00 008 - 00 00 00 00 012 - 00 00 00 00 CMD_SEND:7 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:55 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:51 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:6 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:55 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:6 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:6 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 clock is enabled (50000000Hz) CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:17 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:17 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:17 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:17 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:17 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:18 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:17 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:17 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:17 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:18 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:18 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:18 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:17 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:17 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:17 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:18 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:18 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:17 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:18 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:18 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:18 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:17 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:17 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:17 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:18 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:18 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:18 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:18 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:17 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:18 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000000 CMD_SEND:16 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 CMD_SEND:17 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000000 U-Boot 2019.01-g1ebdbc7-dirty (Feb 26 2020 - 11:06:27 +0530) *************************************** Aarohi Embedded Systems Pvt. Ltd. Project - AM3358 mother board Revision - 2.0 PCB Number : AESPL-PCB19 *************************************** CPU : AM335X-GP rev 2.1 Model: TI AM335x EVM DRAM: 1 GiB NAND: 0 MiB MMC: OMAP SD/MMC: 0 Loading Environment from FAT... clock is disabled (0Hz) clock is enabled (400000Hz) CMD_SEND:0 ARG 0x00000000 MMC_RSP_NONE CMD_SEND:8 ARG 0x000001AA MMC_RSP_R1,5,6,7 0x000001AA CMD_SEND:55 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000120 CMD_SEND:41 ARG 0x40300000 MMC_RSP_R3,4 0x00FF8000 CMD_SEND:55 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000120 CMD_SEND:41 ARG 0x40300000 MMC_RSP_R3,4 0xC0FF8000 CMD_SEND:2 ARG 0x00000000 MMC_RSP_R2 0x1B534D30 0x30303030 0x10C55355 0x1A010239 DUMPING DATA 000 - 1B 53 4D 30 004 - 30 30 30 30 008 - 10 C5 53 55 012 - 1A 01 02 39 CMD_SEND:3 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x59B40520 CMD_SEND:9 ARG 0x59B40000 MMC_RSP_R2 0x400E0032 0x5B590000 0x3BCD7F80 0x0A400041 DUMPING DATA 000 - 40 0E 00 32 004 - 5B 59 00 00 008 - 3B CD 7F 80 012 - 0A 40 00 41 CMD_SEND:7 ARG 0x59B40000 MMC_RSP_R1,5,6,7 0x00000700 CMD_SEND:55 ARG 0x59B40000 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:51 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:6 ARG 0x00FFFFF1 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:55 ARG 0x59B40000 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:6 ARG 0x00000002 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:6 ARG 0x80FFFFF1 MMC_RSP_R1,5,6,7 0x00000900 clock is enabled (50000000Hz) CMD_SEND:55 ARG 0x59B40000 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:13 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:17 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:17 ARG 0x00000800 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:17 ARG 0x000010BE MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:18 ARG 0x00000820 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:17 ARG 0x0000500E MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:18 ARG 0x0000089E MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:18 ARG 0x00000820 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:18 ARG 0x000010BF MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000900 OK not set. Validating first E-fuse MAC Net: Could not get PHY for ethernet@4a100000: addr 0 eth0: ethernet@4a100000 Warning: usb_ether MAC addresses don't match: Address in ROM is de:ad:be:ef:00:01 Address in environment is 04:79:b7:03:48:0b , eth1: usb_ether Hit any key to stop autoboot: 2  1  0 clock is disabled (0Hz) clock is enabled (400000Hz) CMD_SEND:0 ARG 0x00000000 MMC_RSP_NONE CMD_SEND:8 ARG 0x000001AA MMC_RSP_R1,5,6,7 0x000001AA CMD_SEND:55 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000120 CMD_SEND:41 ARG 0x40300000 MMC_RSP_R3,4 0x00FF8000 CMD_SEND:55 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000120 CMD_SEND:41 ARG 0x40300000 MMC_RSP_R3,4 0xC0FF8000 CMD_SEND:2 ARG 0x00000000 MMC_RSP_R2 0x1B534D30 0x30303030 0x10C55355 0x1A010239 DUMPING DATA 000 - 1B 53 4D 30 004 - 30 30 30 30 008 - 10 C5 53 55 012 - 1A 01 02 39 CMD_SEND:3 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x59B40520 CMD_SEND:9 ARG 0x59B40000 MMC_RSP_R2 0x400E0032 0x5B590000 0x3BCD7F80 0x0A400041 DUMPING DATA 000 - 40 0E 00 32 004 - 5B 59 00 00 008 - 3B CD 7F 80 012 - 0A 40 00 41 CMD_SEND:7 ARG 0x59B40000 MMC_RSP_R1,5,6,7 0x00000700 CMD_SEND:55 ARG 0x59B40000 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:51 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:6 ARG 0x00FFFFF1 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:55 ARG 0x59B40000 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:6 ARG 0x00000002 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:6 ARG 0x80FFFFF1 MMC_RSP_R1,5,6,7 0x00000900 clock is enabled (50000000Hz) CMD_SEND:55 ARG 0x59B40000 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:13 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000920 switch to partitions #0, OK mmc0 is current device clock is disabled (0Hz) clock is enabled (400000Hz) CMD_SEND:0 ARG 0x00000000 MMC_RSP_NONE CMD_SEND:8 ARG 0x000001AA MMC_RSP_R1,5,6,7 0x000001AA CMD_SEND:55 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000120 CMD_SEND:41 ARG 0x40300000 MMC_RSP_R3,4 0x00FF8000 CMD_SEND:55 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000120 CMD_SEND:41 ARG 0x40300000 MMC_RSP_R3,4 0xC0FF8000 CMD_SEND:2 ARG 0x00000000 MMC_RSP_R2 0x1B534D30 0x30303030 0x10C55355 0x1A010239 DUMPING DATA 000 - 1B 53 4D 30 004 - 30 30 30 30 008 - 10 C5 53 55 012 - 1A 01 02 39 CMD_SEND:3 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x59B40520 CMD_SEND:9 ARG 0x59B40000 MMC_RSP_R2 0x400E0032 0x5B590000 0x3BCD7F80 0x0A400041 DUMPING DATA 000 - 40 0E 00 32 004 - 5B 59 00 00 008 - 3B CD 7F 80 012 - 0A 40 00 41 CMD_SEND:7 ARG 0x59B40000 MMC_RSP_R1,5,6,7 0x00000700 CMD_SEND:55 ARG 0x59B40000 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:51 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:6 ARG 0x00FFFFF1 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:55 ARG 0x59B40000 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:6 ARG 0x00000002 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:6 ARG 0x80FFFFF1 MMC_RSP_R1,5,6,7 0x00000900 clock is enabled (50000000Hz) CMD_SEND:55 ARG 0x59B40000 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:13 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000920 SD/MMC found on device 0 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:18 ARG 0x00000820 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:18 ARG 0x0000089E MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000900 ** Unable to read file boot.scr ** CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:18 ARG 0x00000820 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:17 ARG 0x0000500A MMC_RSP_R1,5,6,7 0x00000900 264 bytes read in 30 ms (7.8 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... Running uenvcmd ... clock is disabled (0Hz) clock is enabled (400000Hz) CMD_SEND:0 ARG 0x00000000 MMC_RSP_NONE CMD_SEND:8 ARG 0x000001AA MMC_RSP_R1,5,6,7 0x000001AA CMD_SEND:55 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000120 CMD_SEND:41 ARG 0x40300000 MMC_RSP_R3,4 0x00FF8000 CMD_SEND:55 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000120 CMD_SEND:41 ARG 0x40300000 MMC_RSP_R3,4 0xC0FF8000 CMD_SEND:2 ARG 0x00000000 MMC_RSP_R2 0x1B534D30 0x30303030 0x10C55355 0x1A010239 DUMPING DATA 000 - 1B 53 4D 30 004 - 30 30 30 30 008 - 10 C5 53 55 012 - 1A 01 02 39 CMD_SEND:3 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x59B40520 CMD_SEND:9 ARG 0x59B40000 MMC_RSP_R2 0x400E0032 0x5B590000 0x3BCD7F80 0x0A400041 DUMPING DATA 000 - 40 0E 00 32 004 - 5B 59 00 00 008 - 3B CD 7F 80 012 - 0A 40 00 41 CMD_SEND:7 ARG 0x59B40000 MMC_RSP_R1,5,6,7 0x00000700 CMD_SEND:55 ARG 0x59B40000 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:51 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:6 ARG 0x00FFFFF1 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:55 ARG 0x59B40000 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:6 ARG 0x00000002 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:6 ARG 0x80FFFFF1 MMC_RSP_R1,5,6,7 0x00000900 clock is enabled (50000000Hz) CMD_SEND:55 ARG 0x59B40000 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:13 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:18 ARG 0x00023802 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:17 ARG 0x00023808 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:17 ARG 0x000246E0 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:17 ARG 0x000256A8 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:17 ARG 0x00023809 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:17 ARG 0x00523810 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:17 ARG 0x005247D8 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:17 ARG 0x005247D9 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:17 ARG 0x00523819 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:17 ARG 0x00523816 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:18 ARG 0x0052DE60 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:18 ARG 0x0054A800 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:18 ARG 0x00026980 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:18 ARG 0x0002B100 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:18 ARG 0x00029000 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:18 ARG 0x00B364E8 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:18 ARG 0x00B37800 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:18 ARG 0x00B39800 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:12 ARG 0x00000000 MMC_RSP_R1b 0x00000900 4227584 bytes read in 496 ms (8.1 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8fff3000, end 8ffff95a ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.59-g5f8c1c6121 (harshad-linux@harshadlinux-HP-Compaq-6200-Pro-SFF-PC) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #1 PREEMPT Wed Feb 26 10:56:46 IST 2020 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x EVM-SK [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 48 MiB at 0xbd000000 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] random: get_random_bytes called from start_kernel+0xa4/0x434 with crng_init=0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext3 rw rootwait ip=off lpj=3590144 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 975340K/1048576K available (9216K kernel code, 309K rwdata, 2692K rodata, 1024K init, 253K bss, 24084K reserved, 49152K cma-reserved, 212992K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 310 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 254 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000035] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000045] OMAP clocksource: timer1 at 24000000 Hz [ 0.000203] timer_probe: no matching timers found [ 0.000379] Console: colour dummy device 80x30 [ 0.000406] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.000412] This ensures that you still see kernel messages. Please [ 0.000417] update your kernel commandline. [ 0.000469] Calibrating delay loop (skipped) preset value.. 718.02 BogoMIPS (lpj=3590144) [ 0.000485] pid_max: default: 32768 minimum: 301 [ 0.000676] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000693] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001455] CPU: Testing write buffer coherency: ok [ 0.001518] CPU0: Spectre v2: using BPIALL workaround [ 0.002328] Setting up static identity map for 0x80100000 - 0x80100060 [ 0.002466] rcu: Hierarchical SRCU implementation. [ 0.002774] EFI services will not be available. [ 0.004071] devtmpfs: initialized [ 0.011418] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.011793] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.011815] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.015200] pinctrl core: initialized pinctrl subsystem [ 0.015912] DMI not present or invalid. [ 0.016343] NET: Registered protocol family 16 [ 0.018440] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.035380] l4_wkup_cm:clk:0010:0: failed to disable [ 0.076421] cpuidle: using governor ladder [ 0.076455] cpuidle: using governor menu [ 0.081131] OMAP GPIO hardware version 0.1 [ 0.090194] No ATAGs? [ 0.090211] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.102709] edma 49000000.edma: TI EDMA DMA engine driver [ 0.104197] v1_8d: supplied by vbat [ 0.104471] v3_3d: supplied by vbat [ 0.106746] SCSI subsystem initialized [ 0.107195] media: Linux media interface: v0.10 [ 0.107237] videodev: Linux video capture interface: v2.00 [ 0.107323] pps_core: LinuxPPS API ver. 1 registered [ 0.107331] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.107351] PTP clock support registered [ 0.107383] EDAC MC: Ver: 3.0.0 [ 0.108461] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 0.109055] Advanced Linux Sound Architecture Driver Initialized. [ 0.110367] clocksource: Switched to clocksource timer1 [ 0.117796] NET: Registered protocol family 2 [ 0.118581] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) [ 0.118612] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.118681] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.118748] TCP: Hash tables configured (established 8192 bind 8192) [ 0.118871] UDP hash table entries: 512 (order: 1, 8192 bytes) [ 0.118895] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) [ 0.119039] NET: Registered protocol family 1 [ 0.119816] RPC: Registered named UNIX socket transport module. [ 0.119829] RPC: Registered udp transport module. [ 0.119836] RPC: Registered tcp transport module. [ 0.119841] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.120906] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 0.122126] Initialise system trusted keyrings [ 0.122418] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.126527] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.127261] NFS: Registering the id_resolver key type [ 0.127308] Key type id_resolver registered [ 0.127315] Key type id_legacy registered [ 0.127354] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.129452] Key type asymmetric registered [ 0.129468] Asymmetric key parser 'x509' registered [ 0.129533] bounce: pool size: 64 pages [ 0.129597] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.129609] io scheduler noop registered [ 0.129616] io scheduler deadline registered [ 0.129843] io scheduler cfq registered (default) [ 0.129855] io scheduler mq-deadline registered [ 0.129862] io scheduler kyber registered [ 0.131792] pinctrl-single 44e10800.pinmux: 142 pins, size 568 [ 0.134915] pwm-backlight backlight: backlight supply power not found, using dummy regulator [ 0.135003] pwm-backlight backlight: Linked as a consumer to regulator.0 [ 0.178608] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 0.182469] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250 [ 0.832935] console [ttyS0] enabled [ 0.838568] omap_rng 48310000.rng: Random Number Generator ver. 20 [ 0.844953] random: fast init done [ 0.848570] random: crng init done [ 0.853376] tilcdc-panel panel: found backlight [ 0.858234] OF: graph: no port node found in /ocp/lcdc@4830e000 [ 0.865123] OF: graph: no port node found in /ocp/lcdc@4830e000 [ 0.871584] OF: graph: no port node found in /ocp/lcdc@4830e000 [ 0.877536] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.884217] [drm] No driver support for vblank timestamp query. [ 0.934197] Console: switching to colour frame buffer device 100x30 [ 0.956781] tilcdc 4830e000.lcdc: fb0: DRM emulated frame buffer device [ 0.964005] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0 [ 0.982894] brd: module loaded [ 0.992492] loop: module loaded [ 0.998128] libphy: Fixed MDIO Bus: probed [ 1.070417] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 1.078127] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.085395] libphy: 4a101000.mdio: probed [ 1.089435] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver Atheros 8031 ethernet [ 1.099636] cpsw 4a100000.ethernet: Detected MACID = 04:79:b7:03:48:09 [ 1.106468] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 [ 1.112960] cpsw 4a100000.ethernet: ALE Table size 1024 [ 1.118241] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) [ 1.126272] cpsw 4a100000.ethernet: cpsw: Detected MACID = 04:79:b7:03:48:0b [ 1.134655] i2c /dev entries driver [ 1.140031] cpuidle: enable-method property 'ti,am3352' found operations [ 1.147372] sdhci: Secure Digital Host Controller Interface driver [ 1.153622] sdhci: Copyright(c) Pierre Ossman [ 1.158656] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) [ 1.167459] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.173647] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.180064] ledtrig-cpu: registered to indicate activity on CPUs [ 1.191208] NET: Registered protocol family 10 [ 1.197213] Segment Routing with IPv6 [ 1.201104] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.207701] NET: Registered protocol family 17 [ 1.212568] Key type dns_resolver registered [ 1.217097] omap_voltage_late_init: Voltage driver support not added [ 1.224354] Loading compiled-in X.509 certificates [ 1.260588] tps65910 0-002d: No interrupt support, no core IRQ [ 1.268322] vrtc: supplied by vbat [ 1.275374] vio: supplied by vbat [ 1.280081] vdd1: supplied by vbat [ 1.285182] vdd2: supplied by vbat [ 1.291538] vdig1: supplied by vbat [ 1.296264] vdig2: supplied by vbat [ 1.301028] vpll: supplied by vbat [ 1.305670] vdac: supplied by vbat [ 1.310336] vaux1: supplied by vbat [ 1.315170] vaux2: supplied by vbat [ 1.319911] vaux33: supplied by vbat [ 1.324772] vmmc: supplied by vbat [ 1.329189] vbb: supplied by vbat [ 1.334116] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.340065] cpu cpu0: Linked as a consumer to regulator.8 [ 1.345617] cpu cpu0: Dropping the link to regulator.8 [ 1.351031] cpu cpu0: Linked as a consumer to regulator.8 [ 1.357939] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) [ 1.366829] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.372084] omap_hsmmc 48060000.mmc: Linked as a consumer to regulator.18 [ 1.406695] omap_hsmmc 481d8000.mmc: Linked as a consumer to regulator.18 [ 1.440159] input: gpio_buttons0 as /devices/platform/gpio_buttons0/input/input0 [ 1.449124] hctosys: unable to open rtc device (rtc0) [ 1.455393] lis3_reg: disabling [ 1.458705] v1_8d: disabling [ 1.461947] v3_3d: disabling [ 1.465355] ALSA device list: [ 1.468404] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.476556] No soundcards found. [ 1.480911] Waiting for root device /dev/mmcblk0p2... [ 1.488086] mmc0: new high speed SDHC card at address 59b4 [ 1.494723] mmcblk0: mmc0:59b4 00000 7.48 GiB [ 1.501004] mmcblk0: p1 p2 [ 1.511755] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem [ 1.537131] mmc1: new high speed MMC card at address 0001 [ 1.544018] mmcblk1: mmc1:0001 IS004G 3.64 GiB [ 1.550907] mmcblk1boot0: mmc1:0001 IS004G partition 1 2.00 MiB [ 1.557687] mmcblk1boot1: mmc1:0001 IS004G partition 2 2.00 MiB [ 1.565312] mmcblk1rpmb: mmc1:0001 IS004G partition 3 512 KiB, chardev (244:0) [ 1.575465] mmcblk1: p1 p2 [ 2.042770] EXT4-fs (mmcblk0p2): recovery complete [ 2.051053] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.059280] VFS: Mounted root (ext3 filesystem) on device 179:2. [ 2.076241] devtmpfs: mounted [ 2.080839] Freeing unused kernel memory: 1024K [ 2.085931] Run /sbin/init as init process [ 2.477387] systemd[1]: System time before build time, advancing clock. [ 2.522713] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 2.545098] systemd[1]: Detected architecture arm. Welcome to Arago 2019.07! [ 2.591988] systemd[1]: Set hostname to . [ 3.127499] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.144858] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 3.233571] systemd[1]: /lib/systemd/system/gadget-init.service:15: Unknown lvalue 'ExecStopPre' in section 'Service' [ 3.636293] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 3.685548] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 3.721934] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 3.764122] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 3.773002] cryptodev: loading out-of-tree module taints kernel. [ 3.786465] cryptodev: driver 1.9 loaded. [ OK ] Reached target Slices. [ OK ] Reached target Swap. [ 3.842191] usbcore: registered new interface driver usbfs [ 3.847842] usbcore: registered new interface driver hub [ 3.853418] usbcore: registered new device driver usb Mounting Kernel Debug File System... [ 3.888184] usbcore: registered new interface driver ftdi_sio [ 3.894683] usbserial: USB Serial support registered for FTDI USB Serial Device [ OK ] Listening on Network Service Netlink Socket. [ OK ] Listening on Process Core Dump Socket. Mounting Temporary Directory (/tmp)... [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Paths. [ OK ] Created slice system-getty.slice. [ OK ] Started Hardware RNG Entropy Gatherer Daemon. [ OK ] Listening on initctl Compatibility Named Pipe. [ OK ] Created slice system-serial\x2dgetty.slice. Starting Remount Root and Kernel File Systems... [ OK ] Listening on udev Control Socket. Mounting POSIX Message Queue File System... [ 4.329724] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ OK ] Listening on Journal Socket (/dev/log). Starting Journal Service... Starting Create list of required st…ce nodes for the current kernel... [ OK ] Listening on udev Kernel Socket. Starting udev Coldplug all Devices... [ OK ] Reached target Remote File Systems. [ OK ] Started Load Kernel Modules. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted Temporary Directory (/tmp). [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Create list of required sta…vice nodes for the current kernel. Starting Create Static Device Nodes in /dev... Mounting Kernel Configuration File System... Starting Apply Kernel Variables... [ OK ] Started Journal Service. [ OK ] Mounted Kernel Configuration File System. Starting Flush Journal to Persistent Storage... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Apply Kernel Variables. [ 5.071974] systemd-journald[82]: Received request to flush runtime journal from PID 1 Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... [ OK ] Reached target Containers. Mounting /var/volatile... [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Mounted /media/ram. [ OK ] Mounted /var/volatile. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Started udev Kernel Device Manager. [ OK ] Started Load/Save Random Seed. [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... Starting Network Service... Starting Network Time Synchronization... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Service. Starting Network Name Resolution... Starting Wait for Network to be Configured... [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ OK ] Started Network Name Resolution. [ OK ] Reached target Network. [ OK ] Reached target Host and Network Name Lookups. [ 7.726933] omap_rtc 44e3e000.rtc: already running [ 7.734699] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 7.784056] omap_rtc 44e3e000.rtc: registered as rtc0 [ 7.938999] tlv320aic3x-codec 0-001b: Linked as a consumer to regulator.5 [ 8.076831] tlv320aic3x-codec 0-001b: Linked as a consumer to regulator.4 [ OK ] Found device /dev/ttyS0. [ OK ] Started udev Coldplug all Devices. [ OK ] Created slice system-systemd\x2dbacklight.slice. Starting Load/Save Screen Backlight…ightness of backlight:backlight... [ OK ] Started Load/Save Screen Backlight Brightness of backlight:backlight. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timers. [ 8.879593] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 8.946252] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ OK ] Listening on dropbear.socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 9.051572] omap-aes 53500000.aes: will run requests pump with realtime priority Starting Reboot and dump vmcore via kexec... [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ 9.322217] [drm] Initialized pvr 1.17.4948957 20110701 for 56000000.sgx on minor 1 Starting Simple Network Management Protocol (SNMP) Daemon.... [ OK ] Started Redis In-Memory Data Store. [ 9.478580] remoteproc remoteproc0: wkup_m3 is available [ 9.494499] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle Starting Print notice about GPLv3 packages... [ 9.651813] remoteproc remoteproc0: powering up wkup_m3 [ 9.662030] PM: Cannot get wkup_m3_ipc handle [ 9.799856] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 242896 Starting RPC Bind Service... Starting Lightning Fast Webserver With Light System Requirements... [ 9.970916] remoteproc remoteproc0: remote processor wkup_m3 is now up [ 9.970940] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192 [ OK ] Started Job spooling tools. [ OK ] Started Periodic Command Scheduler. Starting Permit User Sessions... [ 10.498170] net eth1: initializing cpsw version 1.12 (0) Starting Enable and configure wl18xx bluetooth stack... [ 10.612837] libphy: PHY 4a101000.mdio:01 not found [ 10.617703] net eth1: phy "4a101000.mdio:01" not found on slave 1, err -19 Starting uim-sysfs.service... [ 10.849416] asoc-simple-card sound: tlv320aic3x-hifi <-> 4803c000.mcasp mapping ok [ OK ] Started D-Bus System Message Bus. [ 10.961711] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 11.022974] asoc-simple-card sound: ASoC: no DMI vendor name! [ 11.162290] PM: bootloader does not support rtc-only! [ 11.340700] net eth0: initializing cpsw version 1.12 (0) Starting Avahi mDNS/DNS-SD Stack... Starting Login Service... [ 11.553550] Atheros 8031 ethernet 4a101000.mdio:00: attached PHY driver [Atheros 8031 ethernet] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) [ OK ] Started Reboot and dump vmcore via kexec. [ OK ] Started RPC Bind Service. [ 11.816153] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started Permit User Sessions. [ OK ] Started Enable and configure wl18xx bluetooth stack. [ OK ] Started Simple Network Management Protocol (SNMP) Daemon.. [ OK ] Found device /dev/ttyS3. [ OK ] Started uim-sysfs.service. [ 20.403115] TI-am335x-tsc TI-am335x-tsc.0.auto: ti,charge-delay not specified [ 20.482428] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator [ 20.556068] input: ti-tsc as /devices/platform/ocp/44e0d000.tscadc/TI-am335x-tsc.0.auto/input/input1 [ 20.626772] am335x-phy-driver 47401300.usb-phy: Linked as a consumer to regulator.0 [ 20.743934] musb-hdrc musb-hdrc.0: MUSB HDRC host driver [ 20.749319] musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 1 [ 20.761357] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator [ 20.899415] am335x-phy-driver 47401b00.usb-phy: Linked as a consumer to regulator.0 [ 20.948686] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 21.070086] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.131074] usb usb1: Product: MUSB HDRC host driver [ 21.136126] usb usb1: Manufacturer: Linux 4.19.59-g5f8c1c6121 musb-hcd [ 21.300661] usb usb1: SerialNumber: musb-hdrc.0 [ 21.351393] hub 1-0:1.0: USB hub found [ 21.420685] hub 1-0:1.0: 1 port detected [ 21.504253] musb-hdrc musb-hdrc.1: MUSB HDRC host driver [ 21.509637] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 2 [ 21.716469] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 21.789347] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.861237] usb usb2: Product: MUSB HDRC host driver [ 21.911322] usb usb2: Manufacturer: Linux 4.19.59-g5f8c1c6121 musb-hcd [ 21.956327] usb usb2: SerialNumber: musb-hdrc.1 [ 22.000819] hub 2-0:1.0: USB hub found [ 22.034231] hub 2-0:1.0: 1 port detected [ 22.505334] remoteproc remoteproc1: 4a334000.pru is available [ 22.561214] pru-rproc 4a334000.pru: PRU rproc node pru@4a334000 probed successfully [ 22.602399] remoteproc remoteproc2: 4a338000.pru is available [ 22.608320] pru-rproc 4a338000.pru: PRU rproc node pru@4a338000 probed successfully *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf bash-dev bash bc binutils cifs-utils cpio cpp-symlinks cpp dosfstools elfutils findutils g++-symlinks g++ gawk gcc-symlinks gcc gdb gdbserver gettext glmark2 gstreamer1.0-libav gzip hidapi libbfd libdw1 libelf1 libgdbm-compat4 libgdbm-dev libgdbm6 libgettextlib libgettextsrc libgmp10 libidn2-0 libmavconn libmpc3 libmpfr6 libreadline-dev libreadline7 libunistring2 m4-dev m4 make mavlink mavros-extras mavros-msgs mavros nettle pdm-anomaly-detection socketcan-interface which If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. [ OK ] Found device /dev/mmcblk0p1. Starting Start USB gadget... Starting Save/Restore Sound Card State... [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Starting rc.pvr.service... [ OK ] Created slice system-systemd\x2dfsck.slice. Starting File System Check on /dev/mmcblk1p1... [ 29.673871] using random self ethernet address [ 29.678357] using random host ethernet address Starting File System Check on /dev/mmcblk0p1... [ 29.720631] using host ethernet address: 04:79:B7:03:48:0B [ 29.720699] using random self ethernet address Starting File System Check on /dev/mmcblk1p2... [ 29.782956] using random host ethernet address [ 29.796348] PVR_K: UM DDK-(4948957) and KM DDK-(4948957) match. [ OK ] [ 29.830684] using host ethernet address: 04:79:B7:03:48:0B [ 29.837594] usb0: HOST MAC 04:79:b7:03:48:0b [ OK ] Started Serial Getty on ttyS3. [ 29.880738] usb0: MAC da:15:da:fe:4f:e7 [ OK ] Started Getty on tty1. [ 29.967102] Mass Storage Function, version: 2009/09/11 [ OK ] Started Serial Getty on ttyS0. [ 29.996846] LUN: removable file: (no medium) [ 30.034544] LUN: removable read only file: /dev/mmcblk0p1 [ 30.040021] Number of LUNs=1 [ OK ] Started NFS status monitor for NFSv2/3 locking.. [ 30.132514] g_multi gadget: Multifunction Composite Gadget [ 30.138056] g_multi gadget: g_multi ready [ OK ] Started Save/Restore Sound Card State. [ OK ] Started rc.pvr.service. [ OK ] Started File System Check on /dev/mmcblk1p1. [ 30.489015] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ OK ] Found device /dev/ttyGS0. [ OK ] Started File System Check on /dev/mmcblk1p2. [ OK ] Started File System Check on /dev/mmcblk0p1. [ OK ] Started Start USB gadget. Mounting /run/media/mmcblk0p1... Mounting /run/media/mmcblk1p2... [ OK ] Started Serial Getty on ttyGS0. [ OK ] Reached target Login Prompts. [ 31.073181] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) Starting Synchronize System and HW clocks... Mounting /run/media/mmcblk1p1... Starting weston.service... [ OK ] Reached target Sound Card. [ OK ] Mounted /run/media/mmcblk0p1. [ OK ] Mounted /run/media/mmcblk1p2. [ OK ] Started Synchronize System and HW clocks. [ OK ] Mounted /run/media/mmcblk1p1. [ OK ] Started weston.service. Starting Matrix GUI... Starting telnetd.service... [ OK ] Started Login Service. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started telnetd.service. [ OK ] Started Matrix GUI. Starting busybox-udhcpd.service... Starting thttpd.service... [ OK ] Started busybox-udhcpd.service. [ OK ] Started thttpd.service. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am335x-evm ttyS0 Arago 2019.07 am335x-evm ttyS0 am335x-evm login: root root@am335x-evm:~# root@am335x-evm:~# root@am335x-evm:~# root@am335x-evm:~# sudo