/*----------------------------------------------------------------------------*/
/* sys_link.cmd                                                               */
/*                                                                            */
/* 
* Copyright (C) 2009-2016 Texas Instruments Incorporated - www.ti.com  
* 
* 
*  Redistribution and use in source and binary forms, with or without 
*  modification, are permitted provided that the following conditions 
*  are met:
*
*    Redistributions of source code must retain the above copyright 
*    notice, this list of conditions and the following disclaimer.
*
*    Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the 
*    documentation and/or other materials provided with the   
*    distribution.
*
*    Neither the name of Texas Instruments Incorporated nor the names of
*    its contributors may be used to endorse or promote products derived
*    from this software without specific prior written permission.
*
*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/

/*                                                                            */
/*----------------------------------------------------------------------------*/
/* USER CODE BEGIN (0) */
/* USER CODE END */


/*----------------------------------------------------------------------------*/
/* Linker Settings                                                            */

--retain="*(.intvecs)"

/* USER CODE BEGIN (1) */
/* USER CODE END */

/*----------------------------------------------------------------------------*/
/* Memory Map                                                                 */

MEMORY
{
 	VECTORS (X)  : origin=0x00020000 length=0x00000020 vfill = 0xffffffff
    FLASH0  (RX) : origin=0x00020020 length=0x000FFFE0 vfill = 0xffffffff
   STACKS  (RW) : origin=0x08000000 length=0x00001500
    RAM     (RW) : origin=0x08001500 length=0x0001EB00

/* USER CODE BEGIN (2) */
#if 1
	/* Add memory regions corresponding to the ECC area of the flash bank */
	ECC_VEC (R) : origin=(0xf0400000 + (start(VECTORS) >> 3))
	length=(size(VECTORS) >> 3)
	ECC={algorithm=algoL2R5F021, input_range=VECTORS}
	ECC_FLA0 (R) : origin=(0xf0400000 + (start(FLASH0) >> 3))
	length=(size(FLASH0) >> 3)
	ECC={algorithm=algoL2R5F021, input_range=FLASH0 }
#endif
/* USER CODE END */
}

/* USER CODE BEGIN (3) */
/* Add an ECC {} directive describing the algorithm that matches the device */
ECC
{
	algoL2R5F021 : address_mask = 0xfffffff8 /*Address Bits 31:3 */
	hamming_mask = R4 /*Use R4/R5 build in Mask */
	parity_mask = 0x0c /*Set which ECC bits are Even & Odd parity */
	mirroring = F021 /*RM57Lx and TMS570LCx are build in F021*/
}
/* USER CODE END */

/*----------------------------------------------------------------------------*/
/* Section Configuration                                                      */

SECTIONS
{
    .intvecs : {} > VECTORS
    .TI.ramfunc align(32) : {	-l F021_API_CortexR4_BE_V3D16.lib(.text) }
								LOAD=FLASH0, RUN=RAM,
								LOAD_START(RamfuncsLoadStart),
								RUN_START(RamfuncsRunStart),
								SIZE(RamfuncsLoadSize)

    .text    : {} > FLASH0 
    .const   : {} > FLASH0 
    .cinit   : {} > FLASH0 
    .pinit   : {} > FLASH0 
    .bss     : {} > RAM
    .data    : {} > RAM
    .sysmem  : {} > RAM
    
    FEE_TEXT_SECTION : {} > FLASH0 
    FEE_CONST_SECTION : {} > FLASH0
    FEE_DATA_SECTION : {} > RAM

/* USER CODE BEGIN (4) */
/* USER CODE END */
}

/* USER CODE BEGIN (5) */
/* USER CODE END */


/*----------------------------------------------------------------------------*/
/* Misc                                                                       */

/* USER CODE BEGIN (6) */
/* USER CODE END */
/*----------------------------------------------------------------------------*/