# hciconfig hci0 up
(stc):  chnl_id list empty :4
(stk) : st_kim_start(stk) :ldisc_install = 1uim:poll broke due to
(stc): st_tty_open event 10(stk) :line discipline installed(PRI:2/ERR:8)

uim:read 1 from install

uim:@ st_uart_config
uim: signal received, opening /dev/ttyS1
uim:@ set_baud_rate
uim:set_baud_rate() done
uim:Installed N_TI_WL Line displine
uim:begin polling...

(stk) : waiting for ver info- timed out (stk) :kim: failed to read local ver
(stk) :download firmware failed(stk) :ldisc_install = 0uim:pol
(stc): st_tty_close l broke due to event 10(PRI:2/ERR:8)

uim:read 0 from install

uim:@ st_uart_config
uim:Un-Installed N_TI_WL Line displine
uim:begin polling...
(stk) :ldisc_install = 1uim:poll broke due to
(stc): st_tty_open  event 10(PRI:2/ERR:8)

uim:read 1 from install

uim:@ st_uart_config
uim: signal received, opening /dev/ttyS1
uim:@ set_baud_rate
uim:set_baud_rate() done
uim:Installed N_TI_WL Line displine
uim:begin polling...
(stk) :line discipline installed
(stk) : waiting for ver info- timed out (stk) :kim: failed to read local ver
(stk) :download firmware failed(stk) :ldisc_install = 0uim:pol
(stc): st_tty_close l broke due to event 10(PRI:2/ERR:8)

uim:read 0 from install

uim:@ st_uart_config
uim:Un-Installed N_TI_WL Line displine
uim:begin polling...
(stk) :ldisc_install = 1uim:poll broke due to
(stc): st_tty_open event 10(PRI:2/ERR:8)

uim:read 1 from install

uim:@ st_uart_config
uim: signal received, opening /dev/ttyS1
uim:(stk) :line discipline installed@ set_baud_rate
uim:set_baud_rate() done
uim:Installed N_TI_WL Line displine
uim:begin polling...

(stk) : waiting for ver info- timed out (stk) :kim: failed to read local ver
(stk) :download firmware failed(stk) :ldisc_install = 0uim:poll
(stc): st_tty_close  broke due to event 10(PRI:2/ERR:8)

uim:read 0 from install

uim:@ st_uart_config
uim:Un-Installed N_TI_WL Line displine
uim:begin polling...
(stk) :ldisc_install = 1uim:poll broke due to e
(stc): st_tty_open vent 10(PRI:2/ERR:8)

uim:read 1 from install

uim:@ st_uart_config
uim: signal received, opening /dev/ttyS1
uim:@ se(stk) :line discipline installedt_baud_rate
uim:set_baud_rate() done
uim:Installed N_TI_WL Line displine
uim:begin polling...

(stk) : waiting for ver info- timed out (stk) :kim: failed to read local ver
(stk) :download firmware failed(stk) :ldisc_install = 0uim:pol
(stc): st_tty_close l broke due to event 10(PRI:2/ERR:8)

uim:read 0 from install

uim:@ st_uart_config
uim:Un-Installed N_TI_WL Line displine
uim:begin polling...
(stk) :ldisc_install = 1uim:poll broke due to e
(stc): st_tty_open vent 10(PRI:2/ERR:8)

uim:read 1 from install

uim:@ st_uart_config
uim: signal received, opening /dev/ttyS1
uim:@ (stk) :line discipline installedset_baud_rate
uim:set_baud_rate() done
uim:Installed N_TI_WL Line displine
uim:begin polling...

(stk) : waiting for ver info- timed out (stk) :kim: failed to read local ver
(stk) :download firmware failed(stk) :ldisc_install = 0uim:pol
(stc): st_tty_close l broke due to event 10(PRI:2/ERR:8)

uim:read 0 from install

uim:@ st_uart_config
uim:Un-Installed N_TI_WL Line displine
uim:begin polling...
(stk) :ldisc_install = 1uim:poll broke due to e
(stc): st_tty_open vent 10(PRI:2/ERR:8)

uim:read 1 from install

uim:@ st_uart_config
uim: signal received, opening /dev/ttyS1
uim:@ se(stk) :line discipline installedt_baud_rate
uim:set_baud_rate() done
uim:Installed N_TI_WL Line displine
uim:begin polling...

(stk) : waiting for ver info- timed out (stk) :kim: failed to read local ver
(stk) :download firmware failed(stk) :ldisc_install = 0uim:pol
(stc): st_tty_close l broke due to event 10(PRI:2/ERR:8)
Bluetooth: st_register failed -22

uim:read 0 from install

uim:@ st_uart_config
uim:Un-Installed N_TI_WL Line displine
uim:begin polling...
Can't init device hci0: Input/output error (5)
# sleep 3; hciconfig hci0 up
(stc):  chnl_id list empty :4
(stk) : st_kim_start(stk) :ldisc_install = 1uim:poll broke due to
(stc): st_tty_open event 10(PRI:2/ERR:8)

uim:read(stk) :line discipline installed 1 from install

uim:@ st_uart_config
uim: signal received, opening /dev/ttyS1
uim:@ set_baud_rate
uim:set_baud_rate() done
uim:Installed N_TI_WL Line displine
uim:begin polling...

(stk) : waiting for ver info- timed out (stk) :kim: failed to read local ver
(stk) :download firmware failed(stk) :ldisc_install = 0uim:pol
(stc): st_tty_close l broke due to event 10(PRI:2/ERR:8)

uim:read 0 from install

uim:@ st_uart_config
uim:Un-Installed N_TI_WL Line displine
uim:begin polling...
(stk) :ldisc_install = 1uim:poll broke due to
(stc): st_tty_open event 10(PRI:2/ERR:8)

uim:read 1 from install

uim:@ st_uart_config
uim: signal received, opening /dev/ttyS1
uim:@ set_baud_rate
uim:set_baud_rate() done
uim:Install(stk) :line discipline installeded N_TI_WL Line displine
uim:begin polling...

(stk) : waiting for ver info- timed out (stk) :kim: failed to read local ver
(stk) :download firmware failed(stk) :ldisc_install = 0uim:pol
(stc): st_tty_close l broke due to event 10(PRI:2/ERR:8)

uim:read 0 from install

uim:@ st_uart_config
uim:Un-Installed N_TI_WL Line displine
uim:begin polling...
(stk) :ldisc_install = 1uim:poll broke due to
(stc): st_tty_open event 10(PRI:2/ERR:8)

uim:read 1 from install

uim:@ st_uart_config
uim: signal r(stk) :line discipline installedeceived, opening /dev/ttyS1
uim:@ set_baud_rate
uim:set_baud_rate() done
uim:Installed N_TI_WL Line displine
uim:begin polling...

(stk) : waiting for ver info- timed out (stk) :kim: failed to read local ver
(stk) :download firmware failed(stk) :ldisc_install = 0uim:pol
(stc): st_tty_close l broke due to event 10(PRI:2/ERR:8)

uim:read 0 from install

uim:@ st_uart_config
uim:Un-Installed N_TI_WL Line displine
uim:begin polling...
(stk) :ldisc_install = 1uim:poll broke due to e
(stc): st_tty_open vent 10(PRI:2/ERR:8)

uim:read 1 from install

uim:@ st_uart_config
uim: signal received, opening /dev/ttyS1
uim:@ set_baud_rate
uim:set_baud_rate() done
uim:Inst(stk) :line discipline installedalled N_TI_WL Line displine
uim:begin polling...

(stk) : waiting for ver info- timed out (stk) :kim: failed to read local ver
(stk) :download firmware failed(stk) :ldisc_install = 0uim:pol
(stc): st_tty_close l broke due to event 10(PRI:2/ERR:8)

uim:read 0 from install

uim:@ st_uart_config
uim:Un-Installed N_TI_WL Line displine
uim:begin polling...
(stk) :ldisc_install = 1uim:poll broke due to e
(stc): st_tty_open vent 10(PRI:2/ERR:8)

uim:read 1 from install

uim:@ st_uart_config
uim: signal received, opening /dev/ttyS1
uim:@ set_baud_rate
uim:set_baud_rate() done
uim:Installed N(stk) :line discipline installed_TI_WL Line displine
uim:begin polling...

(stk) : waiting for ver info- timed out (stk) :kim: failed to read local ver
(stk) :download firmware failed(stk) :ldisc_install = 0uim:pol
(stc): st_tty_close l broke due to event 10(PRI:2/ERR:8)

uim:read 0 from install

uim:@ st_uart_config
uim:Un-Installed N_TI_WL Line displine
uim:begin polling...
(stk) :ldisc_install = 1uim:poll broke due to
(stc): st_tty_open event 10(PRI:2/ERR:8)

uim:read 1 from install

uim:@ st_uart_config
uim: signal received, opening /dev/ttyS1
uim:@ set(stk) :line discipline installed_baud_rate
uim:set_baud_rate() done
uim:Installed N_TI_WL Line displine
uim:begin polling...

(stk) : waiting for ver info- timed out (stk) :kim: failed to read local ver
(stk) :download firmware failed(stk) :ldisc_install = 0uim:pol
(stc): st_tty_close l broke due to event 10(PRI:2/ERR:8)
Bluetooth: st_register failed -22

uim:read 0 from install

uim:@ st_uart_config
uim:Un-Installed N_TI_WL Line displine
uim:begin polling...
Can't init device hci0: Input/output error (5)
#