[   17.760000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.770000] atmel_mci f8000000.mmc: (atmci_dma_complete) set pending xfer complete
[   17.770000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.770000] atmel_mci f8000000.mmc: set pending notbusy
[   17.770000] atmel_mci f8000000.mmc: FSM: state=2
[   17.770000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.770000] atmel_mci f8000000.mmc: (atmci_tasklet_func) set completed xfer complete
[   17.770000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.770000] atmel_mci f8000000.mmc: set pending notbusy
[   17.770000] atmel_mci f8000000.mmc: FSM: state=3
[   17.770000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.770000] atmel_mci f8000000.mmc: set completed not busy
[   17.770000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.770000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.770000] atmel_mci f8000000.mmc: send stop command
[   17.770000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.770000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.770000] atmel_mci f8000000.mmc: FSM: state=4
[   17.770000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.770000] atmel_mci f8000000.mmc: FSM: cmd ready
[   17.770000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.770000] atmel_mci f8000000.mmc: set pending notbusy
[   17.770000] atmel_mci f8000000.mmc: FSM: state=3
[   17.770000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.770000] atmel_mci f8000000.mmc: set completed not busy
[   17.770000] atmel_mci f8000000.mmc: FSM: state=5
[   17.770000] mmc1: req done (CMD18): 0: 00000900 00000900 00000900 00000900
[   17.770000] mmc1:     126976 bytes transferred: 0
[   17.770000] mmc1:     (CMD12): 0: 00000b00 00000b00 00000b00 00000b00
[   17.770000] atmel_mci f8000000.mmc: FSM: state=0
[   17.770000] atmel_mci f8000000.mmc: FSM: state=0
[   17.770000] mmc1: starting CMD18 arg 00090f38 flags 000000b5
[   17.770000] mmc1:     blksz 512 blocks 32 flags 00000200 tsac 100 ms nsac 0
[   17.770000] mmc1:     CMD12 arg 00000000 flags 00000095
[   17.770000] atmel_mci f8000000.mmc: MRQ: cmd 18
[   17.770000] atmel_mci f8000000.mmc: start request: cmd 18
[   17.770000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.770000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.770000] atmel_mci f8000000.mmc: FSM: state=1
[   17.770000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.770000] atmel_mci f8000000.mmc: set completed cmd ready
[   17.770000] atmel_mci f8000000.mmc: command with data transfer
[   17.770000] atmel_mci f8000000.mmc: FSM: state=2
[   17.770000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.770000] atmel_mci f8000000.mmc: (atmci_dma_complete) set pending xfer complete
[   17.770000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.770000] atmel_mci f8000000.mmc: set pending notbusy
[   17.770000] atmel_mci f8000000.mmc: FSM: state=2
[   17.770000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.770000] atmel_mci f8000000.mmc: (atmci_tasklet_func) set completed xfer complete
[   17.770000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.770000] atmel_mci f8000000.mmc: set pending notbusy
[   17.770000] atmel_mci f8000000.mmc: FSM: state=3
[   17.770000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.770000] atmel_mci f8000000.mmc: set completed not busy
[   17.770000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.770000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.770000] atmel_mci f8000000.mmc: send stop command
[   17.770000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.770000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.770000] atmel_mci f8000000.mmc: FSM: state=4
[   17.770000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.770000] atmel_mci f8000000.mmc: FSM: cmd ready
[   17.770000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.770000] atmel_mci f8000000.mmc: set pending notbusy
[   17.770000] atmel_mci f8000000.mmc: FSM: state=3
[   17.770000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.770000] atmel_mci f8000000.mmc: set completed not busy
[   17.770000] atmel_mci f8000000.mmc: FSM: state=5
[   17.770000] mmc1: req done (CMD18): 0: 00000900 00000900 00000900 00000900
[   17.770000] mmc1:     16384 bytes transferred: 0
[   17.770000] mmc1:     (CMD12): 0: 00000b00 00000b00 00000b00 00000b00
[   17.770000] atmel_mci f8000000.mmc: FSM: state=0
[   17.770000] atmel_mci f8000000.mmc: FSM: state=0
[   17.770000] mmc1: starting CMD18 arg 00090f58 flags 000000b5
[   17.770000] mmc1:     blksz 512 blocks 8 flags 00000200 tsac 100 ms nsac 0
[   17.770000] mmc1:     CMD12 arg 00000000 flags 00000095
[   17.770000] atmel_mci f8000000.mmc: MRQ: cmd 18
[   17.770000] atmel_mci f8000000.mmc: start request: cmd 18
[   17.770000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.770000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.770000] atmel_mci f8000000.mmc: FSM: state=1
[   17.770000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.770000] atmel_mci f8000000.mmc: set completed cmd ready
[   17.770000] atmel_mci f8000000.mmc: command with data transfer
[   17.770000] atmel_mci f8000000.mmc: FSM: state=2
[   17.770000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.780000] atmel_mci f8000000.mmc: (atmci_dma_complete) set pending xfer complete
[   17.780000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.780000] atmel_mci f8000000.mmc: set pending notbusy
[   17.780000] atmel_mci f8000000.mmc: FSM: state=2
[   17.780000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.780000] atmel_mci f8000000.mmc: (atmci_tasklet_func) set completed xfer complete
[   17.780000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.780000] atmel_mci f8000000.mmc: set pending notbusy
[   17.780000] atmel_mci f8000000.mmc: FSM: state=3
[   17.780000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.780000] atmel_mci f8000000.mmc: set completed not busy
[   17.780000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.780000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.780000] atmel_mci f8000000.mmc: send stop command
[   17.780000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.780000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.780000] atmel_mci f8000000.mmc: FSM: state=4
[   17.780000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.780000] atmel_mci f8000000.mmc: FSM: cmd ready
[   17.780000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.780000] atmel_mci f8000000.mmc: set pending notbusy
[   17.780000] atmel_mci f8000000.mmc: FSM: state=3
[   17.780000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.780000] atmel_mci f8000000.mmc: set completed not busy
[   17.780000] atmel_mci f8000000.mmc: FSM: state=5
[   17.780000] mmc1: req done (CMD18): 0: 00000900 00000900 00000900 00000900
[   17.780000] mmc1:     4096 bytes transferred: 0
[   17.780000] mmc1:     (CMD12): 0: 00000b00 00000b00 00000b00 00000b00
[   17.780000] atmel_mci f8000000.mmc: FSM: state=0
[   17.780000] atmel_mci f8000000.mmc: FSM: state=0
[   17.780000] mmc1: starting CMD18 arg 0000caf0 flags 000000b5
[   17.780000] mmc1:     blksz 512 blocks 8 flags 00000200 tsac 100 ms nsac 0
[   17.780000] mmc1:     CMD12 arg 00000000 flags 00000095
[   17.780000] atmel_mci f8000000.mmc: MRQ: cmd 18
[   17.780000] atmel_mci f8000000.mmc: start request: cmd 18
[   17.780000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.780000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.780000] atmel_mci f8000000.mmc: FSM: state=1
[   17.780000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.780000] atmel_mci f8000000.mmc: set completed cmd ready
[   17.780000] atmel_mci f8000000.mmc: command with data transfer
[   17.780000] atmel_mci f8000000.mmc: FSM: state=2
[   17.780000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.780000] atmel_mci f8000000.mmc: (atmci_dma_complete) set pending xfer complete
[   17.780000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.780000] atmel_mci f8000000.mmc: set pending notbusy
[   17.780000] atmel_mci f8000000.mmc: FSM: state=2
[   17.780000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.780000] atmel_mci f8000000.mmc: (atmci_tasklet_func) set completed xfer complete
[   17.780000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.780000] atmel_mci f8000000.mmc: set pending notbusy
[   17.780000] atmel_mci f8000000.mmc: FSM: state=3
[   17.780000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.780000] atmel_mci f8000000.mmc: set completed not busy
[   17.780000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.780000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.780000] atmel_mci f8000000.mmc: send stop command
[   17.780000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.780000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.780000] atmel_mci f8000000.mmc: FSM: state=4
[   17.780000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.780000] atmel_mci f8000000.mmc: FSM: cmd ready
[   17.780000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.780000] atmel_mci f8000000.mmc: set pending notbusy
[   17.780000] atmel_mci f8000000.mmc: FSM: state=3
[   17.780000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.780000] atmel_mci f8000000.mmc: set completed not busy
[   17.780000] atmel_mci f8000000.mmc: FSM: state=5
[   17.780000] mmc1: req done (CMD18): 0: 00000900 00000900 00000900 00000900
[   17.780000] mmc1:     4096 bytes transferred: 0
[   17.780000] mmc1:     (CMD12): 0: 00000b00 00000b00 00000b00 00000b00
[   17.780000] atmel_mci f8000000.mmc: FSM: state=0
[   17.780000] atmel_mci f8000000.mmc: FSM: state=0
[   17.780000] mmc1: starting CMD18 arg 00008ce8 flags 000000b5
[   17.780000] mmc1:     blksz 512 blocks 8 flags 00000200 tsac 100 ms nsac 0
[   17.780000] mmc1:     CMD12 arg 00000000 flags 00000095
[   17.780000] atmel_mci f8000000.mmc: MRQ: cmd 18
[   17.780000] atmel_mci f8000000.mmc: start request: cmd 18
[   17.780000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.780000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.780000] atmel_mci f8000000.mmc: FSM: state=1
[   17.780000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.780000] atmel_mci f8000000.mmc: set completed cmd ready
[   17.780000] atmel_mci f8000000.mmc: command with data transfer
[   17.780000] atmel_mci f8000000.mmc: FSM: state=2
[   17.780000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.780000] atmel_mci f8000000.mmc: (atmci_dma_complete) set pending xfer complete
[   17.780000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.780000] atmel_mci f8000000.mmc: set pending notbusy
[   17.780000] atmel_mci f8000000.mmc: FSM: state=2
[   17.780000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.780000] atmel_mci f8000000.mmc: (atmci_tasklet_func) set completed xfer complete
[   17.780000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.780000] atmel_mci f8000000.mmc: set pending notbusy
[   17.790000] atmel_mci f8000000.mmc: FSM: state=3
[   17.790000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.790000] atmel_mci f8000000.mmc: set completed not busy
[   17.790000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.790000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.790000] atmel_mci f8000000.mmc: send stop command
[   17.790000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.790000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.790000] atmel_mci f8000000.mmc: FSM: state=4
[   17.790000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.790000] atmel_mci f8000000.mmc: FSM: cmd ready
[   17.790000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.790000] atmel_mci f8000000.mmc: set pending notbusy
[   17.790000] atmel_mci f8000000.mmc: FSM: state=3
[   17.790000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.790000] atmel_mci f8000000.mmc: set completed not busy
[   17.790000] atmel_mci f8000000.mmc: FSM: state=5
[   17.790000] mmc1: req done (CMD18): 0: 00000900 00000900 00000900 00000900
[   17.790000] mmc1:     4096 bytes transferred: 0
[   17.790000] mmc1:     (CMD12): 0: 00000b00 00000b00 00000b00 00000b00
[   17.790000] atmel_mci f8000000.mmc: FSM: state=0
[   17.790000] atmel_mci f8000000.mmc: FSM: state=0
[   17.790000] mmc1: starting CMD18 arg 0000cce8 flags 000000b5
[   17.790000] mmc1:     blksz 512 blocks 8 flags 00000200 tsac 100 ms nsac 0
[   17.790000] mmc1:     CMD12 arg 00000000 flags 00000095
[   17.790000] atmel_mci f8000000.mmc: MRQ: cmd 18
[   17.790000] atmel_mci f8000000.mmc: start request: cmd 18
[   17.790000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.790000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.790000] atmel_mci f8000000.mmc: FSM: state=1
[   17.790000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.790000] atmel_mci f8000000.mmc: set completed cmd ready
[   17.790000] atmel_mci f8000000.mmc: command with data transfer
[   17.790000] atmel_mci f8000000.mmc: FSM: state=2
[   17.790000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.790000] atmel_mci f8000000.mmc: (atmci_dma_complete) set pending xfer complete
[   17.790000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.790000] atmel_mci f8000000.mmc: set pending notbusy
[   17.790000] atmel_mci f8000000.mmc: FSM: state=2
[   17.790000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.790000] atmel_mci f8000000.mmc: (atmci_tasklet_func) set completed xfer complete
[   17.790000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.790000] atmel_mci f8000000.mmc: set pending notbusy
[   17.790000] atmel_mci f8000000.mmc: FSM: state=3
[   17.790000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.790000] atmel_mci f8000000.mmc: set completed not busy
[   17.790000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.790000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.790000] atmel_mci f8000000.mmc: send stop command
[   17.790000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.790000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.790000] atmel_mci f8000000.mmc: FSM: state=4
[   17.790000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.790000] atmel_mci f8000000.mmc: FSM: cmd ready
[   17.790000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.790000] atmel_mci f8000000.mmc: set pending notbusy
[   17.790000] atmel_mci f8000000.mmc: FSM: state=3
[   17.790000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.790000] atmel_mci f8000000.mmc: set completed not busy
[   17.790000] atmel_mci f8000000.mmc: FSM: state=5
[   17.790000] mmc1: req done (CMD18): 0: 00000900 00000900 00000900 00000900
[   17.790000] mmc1:     4096 bytes transferred: 0
[   17.790000] mmc1:     (CMD12): 0: 00000b00 00000b00 00000b00 00000b00
[   17.790000] atmel_mci f8000000.mmc: FSM: state=0
[   17.790000] atmel_mci f8000000.mmc: FSM: state=0
[   17.810000] mmc2: starting CMD7 arg 00010000 flags 00000015
[   17.810000] atmel_mci f8004000.mmc: MRQ: cmd 7
[   17.810000] atmel_mci f8004000.mmc: start request: cmd 7
[   17.810000] atmel_mci f8004000.mmc: IRQ: cmd ready
[   17.810000] atmel_mci f8004000.mmc: set pending cmd rdy
[   17.810000] atmel_mci f8004000.mmc: FSM: state=1
[   17.810000] atmel_mci f8004000.mmc: FSM: cmd ready?
[   17.810000] atmel_mci f8004000.mmc: set completed cmd ready
[   17.810000] atmel_mci f8004000.mmc: FSM: state=5
[   17.810000] mmc2: req done (CMD7): 0: 00001ec7 00001ec7 00001ec7 00001ec7
[   17.810000] atmel_mci f8004000.mmc: FSM: state=0
[   17.810000] mmc1: starting CMD18 arg 000446f8 flags 000000b5
[   17.810000] mmc1:     blksz 512 blocks 8 flags 00000200 tsac 100 ms nsac 0
[   17.810000] mmc1:     CMD12 arg 00000000 flags 00000095
[   17.810000] atmel_mci f8000000.mmc: MRQ: cmd 18
[   17.810000] atmel_mci f8000000.mmc: start request: cmd 18
[   17.810000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.810000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=1
[   17.810000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.810000] atmel_mci f8000000.mmc: set completed cmd ready
[   17.810000] atmel_mci f8000000.mmc: command with data transfer
[   17.810000] atmel_mci f8000000.mmc: FSM: state=2
[   17.810000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.810000] atmel_mci f8000000.mmc: (atmci_dma_complete) set pending xfer complete
[   17.810000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.810000] atmel_mci f8000000.mmc: set pending notbusy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=2
[   17.810000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.810000] atmel_mci f8000000.mmc: (atmci_tasklet_func) set completed xfer complete
[   17.810000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.810000] atmel_mci f8000000.mmc: set pending notbusy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=3
[   17.810000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.810000] atmel_mci f8000000.mmc: set completed not busy
[   17.810000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.810000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.810000] atmel_mci f8000000.mmc: send stop command
[   17.810000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.810000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=4
[   17.810000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.810000] atmel_mci f8000000.mmc: FSM: cmd ready
[   17.810000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.810000] atmel_mci f8000000.mmc: set pending notbusy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=3
[   17.810000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.810000] atmel_mci f8000000.mmc: set completed not busy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=5
[   17.810000] mmc1: req done (CMD18): 0: 00000900 00000900 00000900 00000900
[   17.810000] mmc1:     4096 bytes transferred: 0
[   17.810000] mmc1:     (CMD12): 0: 00000b00 00000b00 00000b00 00000b00
[   17.810000] atmel_mci f8000000.mmc: FSM: state=0
[   17.810000] atmel_mci f8000000.mmc: FSM: state=0
[   17.810000] mmc1: starting CMD18 arg 001ea518 flags 000000b5
[   17.810000] mmc1:     blksz 512 blocks 8 flags 00000200 tsac 100 ms nsac 0
[   17.810000] mmc1:     CMD12 arg 00000000 flags 00000095
[   17.810000] atmel_mci f8000000.mmc: MRQ: cmd 18
[   17.810000] atmel_mci f8000000.mmc: start request: cmd 18
[   17.810000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.810000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=1
[   17.810000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.810000] atmel_mci f8000000.mmc: set completed cmd ready
[   17.810000] atmel_mci f8000000.mmc: command with data transfer
[   17.810000] atmel_mci f8000000.mmc: FSM: state=2
[   17.810000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.810000] atmel_mci f8000000.mmc: (atmci_dma_complete) set pending xfer complete
[   17.810000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.810000] atmel_mci f8000000.mmc: set pending notbusy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=2
[   17.810000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.810000] atmel_mci f8000000.mmc: (atmci_tasklet_func) set completed xfer complete
[   17.810000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.810000] atmel_mci f8000000.mmc: set pending notbusy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=3
[   17.810000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.810000] atmel_mci f8000000.mmc: set completed not busy
[   17.810000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.810000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.810000] atmel_mci f8000000.mmc: send stop command
[   17.810000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.810000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=4
[   17.810000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.810000] atmel_mci f8000000.mmc: FSM: cmd ready
[   17.810000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.810000] atmel_mci f8000000.mmc: set pending notbusy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=3
[   17.810000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.810000] atmel_mci f8000000.mmc: set completed not busy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=5
[   17.810000] mmc1: req done (CMD18): 0: 00000900 00000900 00000900 00000900
[   17.810000] mmc1:     4096 bytes transferred: 0
[   17.810000] mmc1:     (CMD12): 0: 00000b00 00000b00 00000b00 00000b00
[   17.810000] atmel_mci f8000000.mmc: FSM: state=0
[   17.810000] atmel_mci f8000000.mmc: FSM: state=0
[   17.810000] mmc1: starting CMD18 arg 00043390 flags 000000b5
[   17.810000] mmc1:     blksz 512 blocks 8 flags 00000200 tsac 100 ms nsac 0
[   17.810000] mmc1:     CMD12 arg 00000000 flags 00000095
[   17.810000] atmel_mci f8000000.mmc: MRQ: cmd 18
[   17.810000] atmel_mci f8000000.mmc: start request: cmd 18
[   17.810000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.810000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=1
[   17.810000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.810000] atmel_mci f8000000.mmc: set completed cmd ready
[   17.810000] atmel_mci f8000000.mmc: command with data transfer
[   17.810000] atmel_mci f8000000.mmc: FSM: state=2
[   17.810000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.810000] atmel_mci f8000000.mmc: (atmci_dma_complete) set pending xfer complete
[   17.810000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.810000] atmel_mci f8000000.mmc: set pending notbusy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=2
[   17.810000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.810000] atmel_mci f8000000.mmc: (atmci_tasklet_func) set completed xfer complete
[   17.810000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.810000] atmel_mci f8000000.mmc: set pending notbusy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=3
[   17.810000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.810000] atmel_mci f8000000.mmc: set completed not busy
[   17.810000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.810000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.810000] atmel_mci f8000000.mmc: send stop command
[   17.810000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.810000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=4
[   17.810000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.810000] atmel_mci f8000000.mmc: FSM: cmd ready
[   17.810000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.810000] atmel_mci f8000000.mmc: set pending notbusy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=3
[   17.810000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.810000] atmel_mci f8000000.mmc: set completed not busy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=5
[   17.810000] mmc1: req done (CMD18): 0: 00000900 00000900 00000900 00000900
[   17.810000] mmc1:     4096 bytes transferred: 0
[   17.810000] mmc1:     (CMD12): 0: 00000b00 00000b00 00000b00 00000b00
[   17.810000] atmel_mci f8000000.mmc: FSM: state=0
[   17.810000] atmel_mci f8000000.mmc: FSM: state=0
[   17.810000] mmc1: starting CMD18 arg 001ee500 flags 000000b5
[   17.810000] mmc1:     blksz 512 blocks 8 flags 00000200 tsac 100 ms nsac 0
[   17.810000] mmc1:     CMD12 arg 00000000 flags 00000095
[   17.810000] atmel_mci f8000000.mmc: MRQ: cmd 18
[   17.810000] atmel_mci f8000000.mmc: start request: cmd 18
[   17.810000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.810000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=1
[   17.810000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.810000] atmel_mci f8000000.mmc: set completed cmd ready
[   17.810000] atmel_mci f8000000.mmc: command with data transfer
[   17.810000] atmel_mci f8000000.mmc: FSM: state=2
[   17.810000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.810000] atmel_mci f8000000.mmc: (atmci_dma_complete) set pending xfer complete
[   17.810000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.810000] atmel_mci f8000000.mmc: set pending notbusy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=2
[   17.810000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.810000] atmel_mci f8000000.mmc: (atmci_tasklet_func) set completed xfer complete
[   17.810000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.810000] atmel_mci f8000000.mmc: set pending notbusy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=3
[   17.810000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.810000] atmel_mci f8000000.mmc: set completed not busy
[   17.810000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.810000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.810000] atmel_mci f8000000.mmc: send stop command
[   17.810000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.810000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=4
[   17.810000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.810000] atmel_mci f8000000.mmc: FSM: cmd ready
[   17.810000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.810000] atmel_mci f8000000.mmc: set pending notbusy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=3
[   17.810000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.810000] atmel_mci f8000000.mmc: set completed not busy
[   17.810000] atmel_mci f8000000.mmc: FSM: state=5
[   17.810000] mmc1: req done (CMD18): 0: 00000900 00000900 00000900 00000900
[   17.810000] mmc1:     4096 bytes transferred: 0
[   17.810000] mmc1:     (CMD12): 0: 00000b00 00000b00 00000b00 00000b00
[   17.810000] atmel_mci f8000000.mmc: FSM: state=0
[   17.810000] atmel_mci f8000000.mmc: FSM: state=0
[   17.810000] mmc1: starting CMD18 arg 000434f8 flags 000000b5
[   17.820000] mmc1:     blksz 512 blocks 8 flags 00000200 tsac 100 ms nsac 0
[   17.820000] mmc1:     CMD12 arg 00000000 flags 00000095
[   17.820000] atmel_mci f8000000.mmc: MRQ: cmd 18
[   17.820000] atmel_mci f8000000.mmc: start request: cmd 18
[   17.820000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.820000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.820000] atmel_mci f8000000.mmc: FSM: state=1
[   17.820000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.820000] atmel_mci f8000000.mmc: set completed cmd ready
[   17.820000] atmel_mci f8000000.mmc: command with data transfer
[   17.820000] atmel_mci f8000000.mmc: FSM: state=2
[   17.820000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.820000] atmel_mci f8000000.mmc: (atmci_dma_complete) set pending xfer complete
[   17.820000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.820000] atmel_mci f8000000.mmc: set pending notbusy
[   17.820000] atmel_mci f8000000.mmc: FSM: state=2
[   17.820000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.820000] atmel_mci f8000000.mmc: (atmci_tasklet_func) set completed xfer complete
[   17.820000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.820000] atmel_mci f8000000.mmc: set pending notbusy
[   17.820000] atmel_mci f8000000.mmc: FSM: state=3
[   17.820000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.820000] atmel_mci f8000000.mmc: set completed not busy
[   17.820000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.820000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.820000] atmel_mci f8000000.mmc: send stop command
[   17.820000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.820000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.820000] atmel_mci f8000000.mmc: FSM: state=4
[   17.820000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.820000] atmel_mci f8000000.mmc: FSM: cmd ready
[   17.820000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.820000] atmel_mci f8000000.mmc: set pending notbusy
[   17.820000] atmel_mci f8000000.mmc: FSM: state=3
[   17.820000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.820000] atmel_mci f8000000.mmc: set completed not busy
[   17.820000] atmel_mci f8000000.mmc: FSM: state=5
[   17.820000] mmc1: req done (CMD18): 0: 00000900 00000900 00000900 00000900
[   17.820000] mmc1:     4096 bytes transferred: 0
[   17.820000] mmc1:     (CMD12): 0: 00000b00 00000b00 00000b00 00000b00
[   17.820000] atmel_mci f8000000.mmc: FSM: state=0
[   17.820000] atmel_mci f8000000.mmc: FSM: state=0
[   17.850000] mmc1: starting CMD18 arg 001f24e8 flags 000000b5
[   17.850000] mmc1:     blksz 512 blocks 8 flags 00000200 tsac 100 ms nsac 0
[   17.850000] mmc1:     CMD12 arg 00000000 flags 00000095
[   17.850000] atmel_mci f8000000.mmc: MRQ: cmd 18
[   17.850000] atmel_mci f8000000.mmc: start request: cmd 18
[   17.850000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.850000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.850000] atmel_mci f8000000.mmc: FSM: state=1
[   17.850000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.850000] atmel_mci f8000000.mmc: set completed cmd ready
[   17.850000] atmel_mci f8000000.mmc: command with data transfer
[   17.850000] atmel_mci f8000000.mmc: FSM: state=2
[   17.850000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.850000] atmel_mci f8000000.mmc: (atmci_dma_complete) set pending xfer complete
[   17.850000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.850000] atmel_mci f8000000.mmc: set pending notbusy
[   17.850000] atmel_mci f8000000.mmc: FSM: state=2
[   17.850000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.850000] atmel_mci f8000000.mmc: (atmci_tasklet_func) set completed xfer complete
[   17.850000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.850000] atmel_mci f8000000.mmc: set pending notbusy
[   17.850000] atmel_mci f8000000.mmc: FSM: state=3
[   17.850000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.850000] atmel_mci f8000000.mmc: set completed not busy
[   17.850000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.850000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.850000] atmel_mci f8000000.mmc: send stop command
[   17.850000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.850000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.850000] atmel_mci f8000000.mmc: FSM: state=4
[   17.850000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.850000] atmel_mci f8000000.mmc: FSM: cmd ready
[   17.850000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.850000] atmel_mci f8000000.mmc: set pending notbusy
[   17.850000] atmel_mci f8000000.mmc: FSM: state=3
[   17.850000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.850000] atmel_mci f8000000.mmc: set completed not busy
[   17.850000] atmel_mci f8000000.mmc: FSM: state=5
[   17.850000] mmc1: req done (CMD18): 0: 00000900 00000900 00000900 00000900
[   17.850000] mmc1:     4096 bytes transferred: 0
[   17.850000] mmc1:     (CMD12): 0: 00000b00 00000b00 00000b00 00000b00
[   17.850000] atmel_mci f8000000.mmc: FSM: state=0
[   17.850000] atmel_mci f8000000.mmc: FSM: state=0
[   17.850000] mmc1: starting CMD18 arg 001118f0 flags 000000b5
[   17.850000] mmc1:     blksz 512 blocks 8 flags 00000200 tsac 100 ms nsac 0
[   17.850000] mmc1:     CMD12 arg 00000000 flags 00000095
[   17.850000] atmel_mci f8000000.mmc: MRQ: cmd 18
[   17.850000] atmel_mci f8000000.mmc: start request: cmd 18
[   17.850000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.850000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.850000] atmel_mci f8000000.mmc: FSM: state=1
[   17.850000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.850000] atmel_mci f8000000.mmc: set completed cmd ready
[   17.850000] atmel_mci f8000000.mmc: command with data transfer
[   17.850000] atmel_mci f8000000.mmc: FSM: state=2
[   17.850000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.850000] atmel_mci f8000000.mmc: (atmci_dma_complete) set pending xfer complete
[   17.850000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.850000] atmel_mci f8000000.mmc: set pending notbusy
[   17.850000] atmel_mci f8000000.mmc: FSM: state=2
[   17.850000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.850000] atmel_mci f8000000.mmc: (atmci_tasklet_func) set completed xfer complete
[   17.850000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.850000] atmel_mci f8000000.mmc: set pending notbusy
[   17.850000] atmel_mci f8000000.mmc: FSM: state=3
[   17.850000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.850000] atmel_mci f8000000.mmc: set completed not busy
[   17.850000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.850000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.850000] atmel_mci f8000000.mmc: send stop command
[   17.850000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.850000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.850000] atmel_mci f8000000.mmc: FSM: state=4
[   17.850000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.850000] atmel_mci f8000000.mmc: FSM: cmd ready
[   17.850000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.850000] atmel_mci f8000000.mmc: set pending notbusy
[   17.850000] atmel_mci f8000000.mmc: FSM: state=3
[   17.850000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.850000] atmel_mci f8000000.mmc: set completed not busy
[   17.850000] atmel_mci f8000000.mmc: FSM: state=5
[   17.850000] mmc1: req done (CMD18): 0: 00000900 00000900 00000900 00000900
[   17.850000] mmc1:     4096 bytes transferred: 0
[   17.850000] mmc1:     (CMD12): 0: 00000b00 00000b00 00000b00 00000b00
[   17.850000] atmel_mci f8000000.mmc: FSM: state=0
[   17.850000] atmel_mci f8000000.mmc: FSM: state=0
[   17.900000] mmc1: starting CMD18 arg 00041860 flags 000000b5
[   17.900000] mmc1:     blksz 512 blocks 32 flags 00000200 tsac 100 ms nsac 0
[   17.900000] mmc1:     CMD12 arg 00000000 flags 00000095
[   17.900000] atmel_mci f8000000.mmc: MRQ: cmd 18
[   17.900000] atmel_mci f8000000.mmc: start request: cmd 18
[   17.900000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.900000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.900000] atmel_mci f8000000.mmc: FSM: state=1
[   17.900000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.900000] atmel_mci f8000000.mmc: set completed cmd ready
[   17.900000] atmel_mci f8000000.mmc: command with data transfer
[   17.900000] atmel_mci f8000000.mmc: FSM: state=2
[   17.900000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.900000] atmel_mci f8000000.mmc: (atmci_dma_complete) set pending xfer complete
[   17.900000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.900000] atmel_mci f8000000.mmc: set pending notbusy
[   17.900000] atmel_mci f8000000.mmc: FSM: state=2
[   17.900000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.900000] atmel_mci f8000000.mmc: (atmci_tasklet_func) set completed xfer complete
[   17.900000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.900000] atmel_mci f8000000.mmc: set pending notbusy
[   17.900000] atmel_mci f8000000.mmc: FSM: state=3
[   17.900000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.900000] atmel_mci f8000000.mmc: set completed not busy
[   17.900000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.900000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.900000] atmel_mci f8000000.mmc: send stop command
[   17.900000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.900000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.900000] atmel_mci f8000000.mmc: FSM: state=4
[   17.900000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.900000] atmel_mci f8000000.mmc: FSM: cmd ready
[   17.900000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.900000] atmel_mci f8000000.mmc: set pending notbusy
[   17.900000] atmel_mci f8000000.mmc: FSM: state=3
[   17.900000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.900000] atmel_mci f8000000.mmc: set completed not busy
[   17.900000] atmel_mci f8000000.mmc: FSM: state=5
[   17.900000] mmc1: req done (CMD18): 0: 00000900 00000900 00000900 00000900
[   17.900000] mmc1:     16384 bytes transferred: 0
[   17.900000] mmc1:     (CMD12): 0: 00000b00 00000b00 00000b00 00000b00
[   17.900000] atmel_mci f8000000.mmc: FSM: state=0
[   17.900000] atmel_mci f8000000.mmc: FSM: state=0
[   17.900000] mmc1: starting CMD18 arg 00041880 flags 000000b5
[   17.900000] mmc1:     blksz 512 blocks 8 flags 00000200 tsac 100 ms nsac 0
[   17.900000] mmc1:     CMD12 arg 00000000 flags 00000095
[   17.900000] atmel_mci f8000000.mmc: MRQ: cmd 18
[   17.900000] atmel_mci f8000000.mmc: start request: cmd 18
[   17.900000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.900000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.900000] atmel_mci f8000000.mmc: FSM: state=1
[   17.900000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.900000] atmel_mci f8000000.mmc: set completed cmd ready
[   17.900000] atmel_mci f8000000.mmc: command with data transfer
[   17.900000] atmel_mci f8000000.mmc: FSM: state=2
[   17.900000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.900000] atmel_mci f8000000.mmc: (atmci_dma_complete) set pending xfer complete
[   17.900000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.900000] atmel_mci f8000000.mmc: set pending notbusy
[   17.900000] atmel_mci f8000000.mmc: FSM: state=2
[   17.900000] atmel_mci f8000000.mmc: FSM: xfer complete?
[   17.900000] atmel_mci f8000000.mmc: (atmci_tasklet_func) set completed xfer complete
[   17.900000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.900000] atmel_mci f8000000.mmc: set pending notbusy
[   17.900000] atmel_mci f8000000.mmc: FSM: state=3
[   17.900000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.900000] atmel_mci f8000000.mmc: set completed not busy
[   17.900000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.900000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.900000] atmel_mci f8000000.mmc: send stop command
[   17.900000] atmel_mci f8000000.mmc: IRQ: cmd ready
[   17.900000] atmel_mci f8000000.mmc: set pending cmd rdy
[   17.900000] atmel_mci f8000000.mmc: FSM: state=4
[   17.900000] atmel_mci f8000000.mmc: FSM: cmd ready?
[   17.900000] atmel_mci f8000000.mmc: FSM: cmd ready
[   17.900000] atmel_mci f8000000.mmc: IRQ: not_busy
[   17.900000] atmel_mci f8000000.mmc: set pending notbusy
[   17.900000] atmel_mci f8000000.mmc: FSM: state=3
[   17.900000] atmel_mci f8000000.mmc: FSM: not busy?
[   17.900000] atmel_mci f8000000.mmc: set completed not busy
[   17.900000] atmel_mci f8000000.mmc: FSM: state=5
[   17.900000] mmc1: req done (CMD18): 0: 00000900 00000900 00000900 00000900
[   17.900000] mmc1:     4096 bytes transferred: 0
[   17.900000] mmc1:     (CMD12): 0: 00000b00 00000b00 00000b00 00000b00
[   17.900000] atmel_mci f8000000.mmc: FSM: state=0
[   17.900000] atmel_mci f8000000.mmc: FSM: state=0