Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0x0 Linux version 3.12.13 (banose@jeff) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #1 Fri Dec 26 11:42:30 CST 2014 Machine: Atmel AT91SAM (Device Tree), model: Multi-Tech Systems MT200B2WE AT91: Detected soc type: at91sam9x5 AT91: Detected soc subtype: at91sam9g25 AT91: sram at 0x300000 of 0x8000 mapped at 0xfef70000 Kernel command line: mem=128M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfstype=jffs2 PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc05165a4 (5178 kB) .init : 0xc0517000 - 0xc053f3a4 ( 161 kB) .data : 0xc0540000 - 0xc0569a40 ( 167 kB) .bss : 0xc0569a40 - 0xc0588628 ( 123 kB) NR_IRQS:16 nr_irqs:16 16 sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms Calibrating delay loop... 199.06 BogoMIPS (lpj=995328) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 Initializing cgroup subsys blkio CPU: Testing write buffer coherency: ok Setting up static identity map for 0xc03c4420 - 0xc03c4478 devtmpfs: initialized pinctrl core: initialized pinctrl subsystem regulator-dummy: no parameters NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations AT91: Power Management (with slow clock mode) AT91: Starting after software reset gpio-at91 fffff400.gpio: at address fefff400 gpio-at91 fffff600.gpio: at address fefff600 gpio-at91 fffff800.gpio: at address fefff800 gpio-at91 fffffa00.gpio: at address fefffa00 pinctrl-at91 pinctrl.2: initialized AT91 pinctrl driver bio: create slab at 0 at_hdmac ffffec00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels at_hdmac ffffee00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb i2c-gpio i2c.3: using pins 30 (SDA) and 31 (SCL) Switched to clocksource tcb_clksrc NET: Registered protocol family 2 TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP: reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered jffs2: version 2.2. (NAND) (SUMMARY) ¦© 2001-2006 Red Hat, Inc. ROMFS MTD (C) 2007 Red Hat, Inc. fuse init (API version 7.22) msgmni has been set to 242 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered (default) io scheduler deadline registered io scheduler cfq registered fffff200.serial: ttyS0 at MMIO 0xfffff200 (irq = 16, base_baud = 8333333) is a ATMEL_SERIAL console [ttyS0] enabled f801c000.serial: ttyS1 at MMIO 0xf801c000 (irq = 24, base_baud = 8333333) is a ATMEL_SERIAL f8028000.serial: ttyS2 at MMIO 0xf8028000 (irq = 28, base_baud = 8333333) is a ATMEL_SERIAL brd: module loaded loop: module loaded ssc f0010000.ssc: Atmel SSC device at 0xc88b0000 (irq 22) at24_get_setup: found a match for eeprom at 56 at24 0-0056: 512 byte 24c04 EEPROM, writable, 16 bytes/write sam9x5: read 512 bytes from id eeprom (stk) :sysfs entries created (stk) : debugfs entries created (hci_tty): inside hci_tty_init (hci_tty): allocated 251, 0 atmel_nand 40000000.nand: Using dma0chan0 for DMA transfers. ONFI param page 0 valid ONFI flash detected NAND device: Manufacturer ID: 0x2c, Chip ID: 0xaa (Micron MT29F2G08ABBEAHC), 256MiB, page size: 2048, OOB size: 64 atmel_nand 40000000.nand: ONFI params, minimum required ECC: 4 bits in 512 bytes atmel_nand 40000000.nand: Initialize PMECC params, cap: 4, sector: 512 Scanning device for bad blocks Bad eraseblock 10 at 0x000000140000 9 ofpart partitions found on MTD device atmel_nand Creating 9 MTD partitions on "atmel_nand": 0x000000000000-0x000010000000 : "NANDFlash" 0x000000000000-0x000000040000 : "at91bootstrap" 0x000000040000-0x0000000c0000 : "u-Boot" 0x0000000c0000-0x000000160000 : "u-Boot Config" 0x000000160000-0x000000200000 : "u-Boot Redundant Config" 0x000000200000-0x000000800000 : "uImage" 0x000000800000-0x000001000000 : "Config" 0x000001000000-0x000001800000 : "OEM Config" 0x000001800000-0x000010000000 : "Rootfs" libphy: MACB_mii_bus: probed macb f802c000.ethernet eth0: Cadence MACB at 0xf802c000 irq 25 (00:08:00:88:ff:b6) macb f802c000.ethernet eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=f802c000.etherne:00, irq=-1) PPP generic driver version 2.4.2 PPP BSD Compression module registered PPP Deflate Compression module registered ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-atmel: EHCI Atmel driver atmel-ehci 700000.ehci: EHCI Host Controller atmel-ehci 700000.ehci: new USB bus registered, assigned bus number 1 atmel-ehci 700000.ehci: irq 29, io mem 0x00700000 atmel-ehci 700000.ehci: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.12.13 ehci_hcd usb usb1: SerialNumber: 700000.ehci hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver at91_ohci 600000.ohci: AT91 OHCI at91_ohci 600000.ohci: new USB bus registered, assigned bus number 2 at91_ohci 600000.ohci: irq 29, io mem 0x00600000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: AT91 OHCI usb usb2: Manufacturer: Linux 3.12.13 ohci_hcd usb usb2: SerialNumber: at91 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected at91_rtc fffffeb0.rtc: rtc core: registered fffffeb0.rtc as rtc0 at91_rtc fffffeb0.rtc: AT91 Real Time Clock driver. i2c /dev entries driver at91sam9_wdt: enabled (heartbeat=15 sec, nowayout=0) Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (1940 buckets, 7760 max) ipip: IPv4 over IPv4 tunneling driver gre: GRE over IPv4 demultiplexor driver ip_gre: GRE over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team TCP: cubic registered NET: Registered protocol family 17 l2tp_core: L2TP core driver, V2.0 Key type dns_resolver registered at91_rtc fffffeb0.rtc: setting system clock to 2014-12-29 17:43:40 UTC (1419875020) atmel_nand 40000000.nand: Bit flip in data area, byte_pos: 236, bit_pos: 5, 0x24 -> 0x04 jffs2: notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. VFS: Mounted root (jffs2 filesystem) readonly on device 31:8. devtmpfs: mounted Freeing unused kernel memory: 160K (c0517000 - c053f000) INIT: version 2.86 booting Please wait: booting... Starting udev wlan-en-regulator: 1800 mV atmel_mci f0008000.mmc: version: 0x504 atmel_mci f0008000.mmc: using dma0chan1 for DMA transfers atmel_mci f0008000.mmc: Atmel MCI controller at 0xf0008000 irq 23, 1 slots mmc0: card claims to support voltages below the defined range. These will be ignored. atmel_usba_udc 500000.gadget: MMIO registers at 0xf803c000 mapped at c8966000 atmel_usba_udc 500000.gadget: FIFO at 0x00500000 mapped at d9100000 mmc0: queuing unknown CIS tuple 0x91 (3 bytes) Loading modules backported from Linux version 2.3.3-2-g31d288b Backport generated by backports.git 2.3.3-2-g31d288b mmc0: new high speed SDIO card at address 0001 wl1271_sdio mmc0:0001:2: No platform data set Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized (stc): chnl_id list empty :4 (stk) : st_kim_start(stk) :ldisc_install = 1 (stk) :ldisc installation timeout(stk) :ldisc_install = 0 (stk) : timed out waiting for ldisc to be un-installed(stk) :ldisc_install = 1cfg80211: Calling CRDA to update world regulatory domain (stk) :ldisc installation timeout(stk) :ldisc_install = 0 (stk) : timed out waiting for ldisc to be un-installed(stk) :ldisc_install = 1 (stk) :ldisc installation timeout(stk) :ldisc_install = 0 (stk) : timed out waiting for ldisc to be un-installed(stk) :ldisc_install = 1 (stk) :ldisc installation timeout(stk) :ldisc_install = 0 (stk) : timed out waiting for ldisc to be un-installed(stk) :ldisc_install = 1wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -2 wlcore: WARNING falling back to default config Remounting root file system... Caching udev devnodes wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11) wlcore: loaded wlcore: driver version: ol_r8.a9.14 wlcore: compilation time: Thu Nov 20 16:31:13 2014 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Bluetooth: HIDP socket layer initialized (stk) :ldisc installation timeout(stk) :ldisc_install = 0Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Mounting /var/config mount: can't find /var/config in /etc/fstab or /etc/mtab Creating /var/config flash_eraseall has been replaced by `flash_erase 0 0`; please use it Erasing 128 Kibyte @ 0 -- 0 % complete flash_erase: Cleanmarker written at 0 Erasing 128 Kibyte @ 20000 -- 1 % complete flash_erase: Cleanmarker written at 20000 Erasing 128 Kibyte @ 40000 -- 3 % complete flash_erase: Cleanmarker written at 40000 Erasing 128 Kibyte @ 60000 -- 4 % complete flash_erase: Cleanmarker written at 60000 Erasing 128 Kibyte @ 80000 -- 6 % complete flash_erase: Cleanmarker written at 80000 Erasing 128 Kibyte @ a0000 -- 7 % complete flash_erase: Cleanmarker written at a0000 Erasing 128 Kibyte @ c0000 -- 9 % complete flash_erase: Cleanmarker written at c0000 Erasing 128 Kibyte @ e0000 -- 10 % complete flash_erase: Cleanmarker written at e0000 Erasing 128 Kibyte @ 100000 -- 12 % complete flash_erase: Cleanmarker written at 100000 Erasing 128 Kibyte @ 120000 -- 14 % complete flash_erase: Cleanmarker written at 120000 Erasing 128 Kibyte @ 140000 -- 15 % complete flash_erase: Cleanmarker written at 140000 Erasing 128 Kibyte @ 160000 -- 17 % complete flash_erase: Cleanmarker written at 160000 Erasing 128 Kibyte @ 180000 -- 18 % complete flash_erase: Cleanmarker written at 180000 Erasing 128 Kibyte @ 1a0000 -- 20 % complete flash_erase: Cleanmarker written at 1a0000 Erasing 128 Kibyte @ 1c0000 -- 21 % complete flash_erase: Cleanmarker written at 1c0000 Erasing 128 Kibyte @ 1e0000 -- 23 % complete flash_erase: Cleanmarker written at 1e0000 Erasing 128 Kibyte @ 200000 -- 25 % complete flash_erase: Cleanmarker written at 200000 Erasing 128 Kibyte @ 220000 -- 26 % complete flash_erase: Cleanmarker written at 220000 Erasing 128 Kibyte @ 240000 -- 28 % complete flash_erase: Cleanmarker written at 240000 Erasing 128 Kibyte @ 260000 -- 29 % complete flash_erase: Cleanmarker written at 260000 Erasing 128 Kibyte @ 280000 -- 31 % complete flash_erase: Cleanmarker written at 280000 Erasing 128 Kibyte @ 2a0000 -- 32 % complete flash_erase: Cleanmarker written at 2a0000 Erasing 128 Kibyte @ 2c0000 -- 34 % complete flash_erase: Cleanmarker written at 2c0000 Erasing 128 Kibyte @ 2e0000 -- 35 % complete flash_erase: Cleanmarker written at 2e0000 Erasing 128 Kibyte @ 300000 -- 37 % complete flash_erase: Cleanmarker written at 300000 Erasing 128 Kibyte @ 320000 -- 39 % complete flash_erase: Cleanmarker written at 320000 Erasing 128 Kibyte @ 340000 -- 40 % complete flash_erase: Cleanmarker written at 340000 Erasing 128 Kibyte @ 360000 -- 42 % complete flash_erase: Cleanmarker written at 360000 Erasing 128 Kibyte @ 380000 -- 43 % complete flash_erase: Cleanmarker written at 380000 Erasing 128 Kibyte @ 3a0000 -- 45 % complete flash_erase: Cleanmarker written at 3a0000 Erasing 128 Kibyte @ 3c0000 -- 46 % complete flash_erase: Cleanmarker written at 3c0000 Erasing 128 Kibyte @ 3e0000 -- 48 % complete flash_erase: Cleanmarker written at 3e0000 Erasing 128 Kibyte @ 400000 -- 50 % complete flash_erase: Cleanmarker written at 400000 Erasing 128 Kibyte @ 420000 -- 51 % complete flash_erase: Cleanmarker written at 420000 Erasing 128 Kibyte @ 440000 -- 53 % complete flash_erase: Cleanmarker written at 440000 Erasing 128 Kibyte @ 460000 -- 54 % complete flash_erase: Cleanmarker written at 460000 Erasing 128 Kibyte @ 480000 -- 56 % complete flash_erase: Cleanmarker written at 480000 Erasing 128 Kibyte @ 4a0000 -- 57 % complete flash_erase: Cleanmarker written at 4a0000 Erasing 128 Kibyte @ 4c0000 -- 59 % complete flash_erase: Cleanmarker written at 4c0000 Erasing 128 Kibyte @ 4e0000 -- 60 % complete flash_erase: Cleanmarker written at 4e0000 Erasing 128 Kibyte @ 500000 -- 62 % complete flash_erase: Cleanmarker written at 500000 Erasing 128 Kibyte @ 520000 -- 64 % complete flash_erase: Cleanmarker written at 520000 Erasing 128 Kibyte @ 540000 -- 65 % complete flash_erase: Cleanmarker written at 540000 Erasing 128 Kibyte @ 560000 -- 67 % complete flash_erase: Cleanmarker written at 560000 Erasing 128 Kibyte @ 580000 -- 68 % complete flash_erase: Cleanmarker written at 580000 Erasing 128 Kibyte @ 5a0000 -- 70 % complete flash_erase: Cleanmarker written at 5a0000 Erasing 128 Kibyte @ 5c0000 -- 71 % complete flash_erase: Cleanmarker written at 5c0000 Erasing 128 Kibyte @ 5e0000 -- 73 % complete flash_erase: Cleanmarker written at 5e0000 Erasing 128 Kibyte @ 600000 -- 75 % complete flash_erase: Cleanmarker written at 600000 Erasing 128 Kibyte @ 620000 -- 76 % complete flash_erase: Cleanmarker written at 620000 Erasing 128 Kibyte @ 640000 -- 78 % complete flash_erase: Cleanmarker written at 640000 Erasing 128 Kibyte @ 660000 -- 79 % complete flash_erase: Cleanmarker written at 660000 Erasing 128 Kibyte @ 680000 -- 81 % complete flash_erase: Cleanmarker written at 680000 Erasing 128 Kibyte @ 6a0000 -- 82 % complete flash_erase: Cleanmarker written at 6a0000 Erasing 128 Kibyte @ 6c0000 -- 84 % complete flash_erase: Cleanmarker written at 6c0000 Erasing 128 Kibyte @ 6e0000 -- 85 % complete flash_erase: Cleanmarker written at 6e0000 Erasing 128 Kibyte @ 700000 -- 87 % complete flash_erase: Cleanmarker written at 700000 Erasing 128 Kibyte @ 720000 -- 89 % complete flash_erase: Cleanmarker written at 720000 Erasing 128 Kibyte @ 740000 -- 90 % complete flash_erase: Cleanmarker written at 740000 Erasing 128 Kibyte @ 760000 -- 92 % complete flash_erase: Cleanmarker written at 760000 Erasing 128 Kibyte @ 780000 -- 93 % complete flash_erase: Cleanmarker written at 780000 Erasing 128 Kibyte @ 7a0000 -- 95 % complete flash_erase: Cleanmarker written at 7a0000 Erasing 128 Kibyte @ 7c0000 -- 96 % complete flash_erase: Cleanmarker written at 7c0000 Erasing 128 Kibyte @ 7e0000 -- 98 % complete flash_erase: Cleanmarker written at 7e0000 Erasing 128 Kibyte @ 7e0000 -- 100 % complete mount: can't find /var/config in /etc/fstab or /etc/mtab root: mount: mount point /proc/bus/usb does not exist (stk) : timed out waiting for ldisc to be un-installed(stk) :ldisc_install = 1Loading mts-io module [INFO] mts-io:mts_io_init:608: init: v0.9.1 [INFO] mts-io:mts_id_eeprom_load:552: detected board MT200B2WE-0.0 [INFO] mts-io:mts_id_eeprom_load:566: sizeof: 512 [INFO] mts-io:mts_id_eeprom_load:567: vendor-id: Multi-Tech Systems [INFO] mts-io:mts_id_eeprom_load:568: product-id: MT200B2WE [INFO] mts-io:mts_id_eeprom_load:569: device-id: 123456789 [INFO] mts-io:mts_id_eeprom_load:570: hw-version: MT200B2WE-0.0 [INFO] mts-io:mts_id_eeprom_load:577: mac-addr: 00:08:00:88:FF:B6 [INFO] mts-io:mts_id_eeprom_load:578: imei: [INFO] mts-io:mts_id_eeprom_load:579: capa-gps: no [INFO] mts-io:mts_id_eeprom_load:580: capa-din: no [INFO] mts-io:mts_id_eeprom_load:581: capa-dout: no [INFO] mts-io:mts_id_eeprom_load:582: capa-adc: no [INFO] mts-io:mts_id_eeprom_load:583: capa-wifi: no [INFO] mts-io:mts_id_eeprom_load:584: capa-bluetooth: yes [INFO] mts-io:mts_id_eeprom_load:591: mac-bluetooth: 00:00:00:00:00:00 [INFO] mts-io:mts_id_eeprom_load:598: mac-wifi: 00:00:00:00:00:00 Configuring network interfaces... (stk) :ldisc installation timeout(stk) :ldisc_install = 0done. net.ipv4.ip_forward = 1 INIT: Entering runlevel: 5 Starting system message bus: dbus. (stk) : timed out waiting for ldisc to be un-installedBluetooth: st_register failed -22 UIM SYSFS Node Found at /sys/./devices/kim.7/install Starting uim-sysfs daemon. uim:@ main uim:install = /sys/./devices/kim.7/install uim:dev_name = /sys/./devices/kim.7/dev_name uim:baud_rate = /sys/./devices/kim.7/baud_rate uim:flow_cntrl = /sys/./devices/kim.7/flow_cntrl uim:begin polling... Starting Dropbear SSH server: macb f802c000.ethernet eth0: link up (100/Full) dropbear. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. atmel_nand 40000000.nand: Bit flip in data area, byte_pos: 236, bit_pos: 5, 0x24 -> 0x04 Setting up bluetooth device... atmel_nand 40000000.nand: Bit flip in data area, byte_pos: 236, bit_pos: 5, 0x24 -> 0x04 /usr/lib/mts-io-sysfs/mts-io-sysfs-inc.sh: line 54: /sys/devices/platform/mts-io/bt-reset: No such file or directory (stc): chnl_id list empty :4 (stk) : st_kim_start(stk) :ldisc_install = 1uim:poll broke due to event 10(PRI:2/ERR:8) uim:read 1 from install uim:@ st_uart_config uim: signal received, opening /dev/ttyS1 uim:@ set_baud_rate uim:set_baud_rate() done uim:Setting speed to 3000000 uim:@ read_command_complete uim: Command complete started uim:@ read_hci_event uim: read_hci_event uim:Co (stc): st_tty_open mman(stk) :line discipline installedd complete done uim:Speed changing to 3000000, 1 uim:@ set_custom_baud_rate uim:Installed N_TI_WL Line displine uim:begin polling... (stk) : waiting for ver info- timed out (stk) :kim: failed to read local ver (stk) :download firmware failed(stk) :ldisc_install = 0uim:pol (stc): st_tty_close l broke due to event 10(PRI:2/ERR:8) uim:read 0 from install uim:@ st_uart_config uim:Un-Installed N_TI_WL Line displine uim:begin polling... (stk) :ldisc_install = 1uim:poll broke due to event 10(PRI:2/ERR:8) uim:read 1 from install uim:@ st_uart_config uim: signal received, opening /dev/ttyS1 uim:@ set_baud_rate uim:set_baud_rate() done uim:Setting speed to 3000000 uim:@ read_command_complete uim: Command complete started uim:@ read_hci_event uim: read_hci_event uim:C (stc): st_tty_open omma(stk) :line discipline installednd complete done uim:Speed changing to 3000000, 1 uim:@ set_custom_baud_rate uim:Installed N_TI_WL Line displine uim:begin polling... (stk) : waiting for ver info- timed out (stk) :kim: failed to read local ver (stk) :download firmware failed(stk) :ldisc_install = 0uim:pol (stc): st_tty_close l broke due to event 10(PRI:2/ERR:8) uim:read 0 from install uim:@ st_uart_config uim:Un-Installed N_TI_WL Line displine uim:begin polling... (stk) :ldisc_install = 1uim:poll broke due to event 10(PRI:2/ERR:8) uim:read 1 from install uim:@ st_uart_config uim: signal received, opening /dev/ttyS1 uim:@ set_baud_rate uim:set_baud_rate() done uim:Setting speed to 3000000 uim:@ read_command_complete uim: Command complete started uim:@ read_hci_event uim: read_hci_event uim:C (stc): st_tty_open ommand c(stk) :line discipline installedomplete done uim:Speed changing to 3000000, 1 uim:@ set_custom_baud_rate uim:Installed N_TI_WL Line displine uim:begin polling... (stk) : waiting for ver info- timed out (stk) :kim: failed to read local ver (stk) :download firmware failed(stk) :ldisc_install = 0uim:poll broke (stc): st_tty_close due to event 10(PRI:2/ERR:8) uim:read 0 from install uim:@ st_uart_config uim:Un-Installed N_TI_WL Line displine (stk) :ldisc_install = 1uim:begin polling... uim:poll broke due to event 10(PRI:2/ERR:8) uim:read 1 from install uim:@ st_uart_config uim: signal received, opening /dev/ttyS1 uim:@ set_baud_rate uim:set_baud_rate() done uim:Setting speed to 3000000 uim:@ read_command_complete uim: Command complete started uim:@ read_hci_event uim: read_hci_event uim:C (stc): st_tty_open ommand (stk) :line discipline installedcomplete done uim:Speed changing to 3000000, 1 uim:@ set_custom_baud_rate uim:Installed N_TI_WL Line displine uim:begin polling... (stk) : waiting for ver info- timed out (stk) :kim: failed to read local ver (stk) :download firmware failed(stk) :ldisc_install = 0uim:pol (stc): st_tty_close l broke due to event 10(PRI:2/ERR:8) uim:read 0 from install uim:@ st_uart_config uim:Un-Installed N_TI_WL Line displine uim:begin polling... (stk) :ldisc_install = 1uim:poll broke due to event 10(PRI:2/ERR:8) uim:read 1 from install uim:@ st_uart_config uim: signal received, opening /dev/ttyS1 uim:@ set_baud_rate uim:set_baud_rate() done uim:Setting speed to 3000000 uim:@ read_command_complete uim: Command complete started uim:@ read_hci_event uim: read_hci_event uim:C (stc): st_tty_open ommand (stk) :line discipline installedcomplete done uim:Speed changing to 3000000, 1 uim:@ set_custom_baud_rate uim:Installed N_TI_WL Line displine uim:begin polling... (stk) : waiting for ver info- timed out (stk) :kim: failed to read local ver (stk) :download firmware failed(stk) :ldisc_install = 0uim:pol (stc): st_tty_close l broke due to event 10(PRI:2/ERR:8) uim:read 0 from install uim:@ st_uart_config uim:Un-Installed N_TI_WL Line displine uim:begin polling... (stk) :ldisc_install = 1uim:poll broke due to event 10(PRI:2/ERR:8) uim:read 1 from install uim:@ st_uart_config uim: signal received, opening /dev/ttyS1 uim:@ set_baud_rate uim:set_baud_rate() done uim:Setting speed to 3000000 uim:@ read_command_complete uim: Command complete started uim:@ read_hci_event uim: read_hci_event uim:C (stc): st_tty_open ommand (stk) :line discipline installedcomplete done uim:Speed changing to 3000000, 1 uim:@ set_custom_baud_rate uim:Installed N_TI_WL Line displine uim:begin polling... (stk) : waiting for ver info- timed out (stk) :kim: failed to read local ver (stk) :download firmware failed(stk) :ldisc_install = 0uim:pol (stc): st_tty_close l broke due to event 10(PRI:2/ERR:8) Bluetooth: st_register failed -22 uim:read 0 from install uim:@ st_uart_config uim:Un-Installed N_TI_WL Line displine uim:begin polling... Bridge firewalling registered Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized Multi-Tech Systems B2E mt200b2we ttyS0 CoreCDP 2.3.3 mt200b2we ttyS0 mt200b2we login: