Does TI have a reference design for software pacemaker detection in ECG?

Does TI have a reference design for hardware pacemaker detection in ECG?

How is electrode contact impedance calculated using lead-off detection?

Does TI have an application note that covers the theory behind lead-off detection?

Does TI have an application note that covers how to improve common-mode rejection (remove 50/60Hz noise) using the right-leg drive amplifier (RLD)?

Does TI have an application note that covers how respiration rate is measured?

Part Number: AWR1843 Here is a summary of detection for two static objects. There are dependencies on antenna, algorithm, reflectivity of the objects Depending on an antenna used, the radar data can contain the following information: range, velocity…

Part Number: IWR6843AOPEVM Other Parts Discussed in Thread: MMWAVEICBOOST , IWR6843AOP Hi TI Sensors Support Team, I bought and received a IWR6843AOPEVM made by Mistral recently. This board with a on-board heat sink looks different from pictures on…

Part Number: UCC23513 My colleagues have just published a White Paper, titled, "How Capacitive Isolation Solves Key Challenges in AC Motor Drives." You can find it here: Signal and power isolation help ensure reliable operation of AC motor drive…

Part Number: TPS61220 The device can output setting value at no loading, but when adding load, such as 5mA or 10mA, the output voltage drops down and can't maintain.